-wxWindows 2.5 for GTK installation
-----------------------------------
+wxWidgets 2.7 for GTK+ installation
+-----------------------------------
IMPORTANT NOTE:
mailing wxwin-users or the author. Preferably, try to fix the
problem first and then send a patch to the author.
- When sending bug reports tell us what version of wxWindows you are
+ When sending bug reports tell us what version of wxWidgets you are
using (including the beta) and what compiler on what system. One
- example: wxGTK 2.4.0, gcc 2.95.4, Redhat 6.2
+ example: wxGTK 2.7.0, gcc 3.4.5, Fedora Core 4
* The simplest case
-------------------
-If you compile wxWindows on Linux for the first time and don't like to read
+If you compile wxWidgets on Linux for the first time and don't like to read
install instructions just do (in the base dir):
-> ./configure --with-gtk
+> mkdir buildgtk
+> cd buildgtk
+> ../configure --with-gtk
> make
> su <type root password>
> make install
> ldconfig
-> exit
+[if you get "ldconfig: command not found", try using "/sbin/ldconfig"]
-Afterwards you can continue with
+If you don't do the 'make install' part, you can still use the libraries from
+the buildgtk directory, but they may not be available to other users.
-> make
-> su <type root password>
-> make install
-> ldconfig
-> exit
-
-If you want to remove wxWindows on Unix you can do this:
+If you want to remove wxWidgets on Unix you can do this:
> su <type root password>
> make uninstall
> ldconfig
-> exit
-
-* The GTK+ 2 case
------------------
-
-wxGTK has support for the new version 2.0.X of GTK+ since version 2.4.0.
-This means that wxGTK apps can now make use Unicode as the underlying encoding
-for all text operations. This is a very fundamental change and will need time
-to stabilize, so be careful. Anyways, after installing a recent version of GTK+
-2.0, do this
-
-> ./configure --with-gtk --enable-gtk2 --enable-unicode
-> make
-> su <type root password>
-> make install
-> ldconfig
-> exit
-
-If you are adventurous, you can install the FcConfig 2.0 package
-and the Pango library from CVS (or a very recent snapshot from
-the upcoming 1.2 series) and set do "export GDK_USE_XFT=1" so
-that the display as well as the printing code will use render
-using the same FreeType code even for Far Eastern encodings.
-Expect problems.
+Note that by default, GTK+ 2.X is used. GTK+ 1.2 can be specified
+with --with-gtk=1.
* The expert case
-----------------
-If you want to do some more serious cross-platform programming with wxWindows,
-such as for GTK and Motif, you can now build two complete libraries and use
-them concurrently. For this end, you have to create a directory for each build
-of wxWindows - you may also want to create different versions of wxWindows
+If you want to do some more serious cross-platform programming with wxWidgets,
+such as for GTK+ and Motif, you can now build two complete libraries and use
+them concurrently. To do this, create a separate directory for each build
+of wxWidgets - you may also want to create different versions of wxWidgets
and test them concurrently. Most typically, this would be a version configured
-with --enable-debug and one without. Note, that only one build can
-currently be installed, so you'd have to use local version of the library for
-that purpose.
+with --enable-debug and one without.
-For building three versions (one GTK, one Motif and a debug version of the GTK
+For building three versions (one GTK+, one Motif and a debug version of the GTK
source) you'd do this:
-md buildmotif
+mkdir buildmotif
cd buildmotif
../configure --with-motif
make
cd ..
-md buildgtk
+mkdir buildgtk
cd buildgtk
../configure --with-gtk
make
cd ..
-md buildgtkd
+mkdir buildgtkd
cd buildgtkd
../configure --with-gtk --enable-debug
make
cd ..
+Note that you can install all those libraries concurrently, you just need to
+pass the appropriate flags when using them.
+
* The simplest errors
---------------------
For any configure errors: please look at config.log file which was generated
during configure run, it usually contains some useful information.
-configure reports, that you don't have GTK 1.2 installed although you are
+configure reports, that you don't have GTK+ 1.2/2.0 installed although you are
very sure you have. Well, you have installed it, but you also have another
-version of the GTK installed, which you may need to remove including other
-versions of glib (and its headers). Or maybe you installed it in non default
+version of the GTK+ installed, which you may need to remove including other
+versions of glib (and its headers). Or maybe you installed it in a non-default
location and configure can't find it there, so please check that your PATH
-variable includes the path to the correct gtk-config. Also check that your
-LD_LIBRARY_PATH or equivalent variable contains the path to GTK+ libraries if
-they were installed in a non default location.
+variable includes the path to the correct gtk-config/pkg-config. Also check
+that your LD_LIBRARY_PATH or equivalent variable contains the path to GTK+
+libraries if they were installed in a non-default location.
You get errors from make: please use GNU make instead of the native make
-program. Currently wxWindows can be built only with GNU make, BSD make and
+program. Currently wxWidgets can be built only with GNU make, BSD make and
Solaris make. Other versions might work or not (any which don't have VPATH
support definitely won't).
library but not for your program - or due to using a compiler with optimisation
bugs.
-Linker complains about missing PROIO_yy_flex_alloc and similar symbols: you
-probably have an old version of flex, 2.5.4 is recommended.
-
* The simplest program
----------------------
g++ myfoo.cpp `wx-config --libs --cxxflags` -o myfoo
-* General
----------
-
-The Unix variants of wxWindows use GNU configure. If you have problems with
-your make use GNU make instead.
-
-If you have general problems with installation, read my homepage at
-
- http://wesley.informatik.uni-freiburg.de/~wxxt/
-
-for newest information. If you still don't have any success, please send a bug
-report to one of our mailing lists (see my homepage) INCLUDING A DESCRIPTION OF
-YOUR SYSTEM AND YOUR PROBLEM, SUCH AS YOUR VERSION OF GTK, WXGTK, WHAT
-DISTRIBUTION YOU USE AND WHAT ERROR WAS REPORTED. I know this has no effect,
-but I tried...
-
* GUI libraries
---------------
-wxWindows/GTK requires the GTK+ library to be installed on your system. It has
-to be a stable version, preferably version 1.2.10 (at least 1.2.3 is required,
-1.2.7 is strongly recommended).
+wxWidgets/GTK+ requires the GTK+ library to be installed on your system. It has
+to be a stable version, preferably GTK+ 2.x.y, where x is an even number.
+GTK+ version 1.2 is highly discouraged, but if you decide to still use it,
+please use version 1.2.10 (at least 1.2.3 is required, 1.2.7 is strongly recommended).
-You can get the newest version of the GTK+ from the GTK homepage at:
+You can get the newest version of the GTK+ from the GTK+ homepage at:
http://www.gtk.org
* Additional libraries
----------------------
-wxWindows/Gtk requires a thread library and X libraries known to work with
+wxWidgets/Gtk requires a thread library and X libraries known to work with
threads. This is the case on all commercial Unix-Variants and all
Linux-Versions that are based on glibc 2 except RedHat 5.0 which is broken in
many aspects. As of writing this, virtually all Linux distributions have
Please send comments and question about the OS/2 installation
to Stefan Neis <Stefan.Neis@t-online.de> and patches to
-the wxWindows mailing list.
+the wxWidgets mailing list.
In the following list, the version numbers indicate the configuration that
was actually used by myself, newer version should cause no problems and
even older ones are expected to work most of the time.
You'll need OS/2 Warp (4.51) or eCS(1.0), X-Free86/2 (3.3.6 or newer),
-GTK+ (1.2.5 or newer), emx (0.9d fix 4), flex (2.5.4), yacc (1.8) or
-bison (1.25), a Unix like shell (pdksh-5.2.14 or ash), Autoconf (2.57),
-GNU file utilities (3.13), GNU text utilities (1.19),
+GTK+ (1.2.5 or newer), emx (0.9d fix 4), a Unix like shell (pdksh-5.2.14 or
+ash), Autoconf (2.57), GNU file utilities (3.13), GNU text utilities (1.19),
GNU shell utilites (1.12), m4 (1.4), sed (2.05), grep (2.0), Awk (3.0.3),
GNU Make (3.75).
Presence of Posix/2 will be auto-detected.
Open an OS/2 prompt and switch to the directory above.
-Set MAKESHELL (and depending on your installation also INSTALL, for me
-it tends to try to use the system's tcpip\pcomos\install.exe which causes
-problems...) to a Unix like shell, e.g.
+Set MAKESHELL or MAKE_SHELL (which one is needed depends on the version of
+make) to a Unix like shell, e.g.
SET MAKESHELL=ash
-
-Be warned that depending on the precise version of your make, the
-variable that needs to be set might be MAKE_SHELL instead of MAKESHELL.
If you have a really deficient version of GNU make, it might even be
necessary to set SHELL or even COMSPEC to a unix like shell as well.
+Depending on your installation you might want to also set INSTALL, for me
+it tends to try to use the system's tcpip\pcomos\install.exe which causes
+problems, e.g.
+SET INSTALL=<path_to_src_directory>/install-sh -c
Notice that the delivered configure scripts are fully OS/2 aware, so you
can simply run
- ash -c "configure --with-gtk"
+ ash -c "configure --with-gtk=1"
and make and possibly make install as described above.
* Building wxGTK on SGI
The SGI native compiler support has only been tested on Irix 6.5.
+* Building wxGTK on Cygwin
+--------------------------
+
+The normal build instructions should work fine on Cygwin. The one difference
+with Cygwin is that when using the "--enable-shared" configure option (which
+is the default) the API is exported explicitly using __declspec(dllexport)
+rather than all global symbols being available.
+
+This shouldn't make a difference using the library and should be a little
+more efficient. However if an export attribute has been missed somewhere you
+will see linking errors. If this happens then you can work around the
+problem by setting LDFLAGS=-Wl,--export-all-symbols. Please also let us know
+about it on the wx-dev mailing list.
+
* Create your configuration
---------------------------
./configure options
If you want to use system's C and C++ compiler,
-set environment variables CC and CCC as
+set environment variables CC and CXX as
% setenv CC cc
% setenv CXX CC
./configure --help
-It is recommended to build wxWindows in another directory (maybe a
-subdirectory of your wxWindows installation) as this allows you to
+It is recommended to build wxWidgets in another directory (maybe a
+subdirectory of your wxWidgets installation) as this allows you to
have multiple configurations (for example, debug and release or GTK
and Motif) simultaneously.
if you use all of our CVS repository you have to choose a
toolkit. You must do this by running configure with either of:
- --with-gtk Use the GIMP ToolKit (GTK). Default.
-
+ --with-gtk=2 Use the GTK+ 2.0. Default.
+ --with-gtk=1 Use the GTK+ 1.2.
--with-motif Use either Motif or Lesstif
Configure will look for both.
--disable-shared Do not create shared libraries, but
build static libraries instead.
- --enable-monolithic Build wxWindows as single library instead
+ --enable-monolithic Build wxWidgets as single library instead
of as several smaller libraries (which is
- the default since wxWindows 2.5.0).
+ the default since wxWidgets 2.5.0).
--disable-optimise Do not optimise the code. Can
sometimes be useful for debugging
such as Sun with gcc 2.8.X which
would otherwise produce segvs.
+ --enable-unicode Enable Unicode support.
+
--enable-profile Add profiling info to the object
files. Currently broken, I think.
such as gdb (or its many frontends).
--enable-debug_flag Define __DEBUG__ and __WXDEBUG__ when
- compiling. This enable wxWindows' very
+ compiling. This enable wxWidgets' very
useful internal debugging tricks (such
as automatically reporting illegal calls)
to work. Note that program and library
When producing an executable that is linked statically with wxGTK
you'll be surprised at its immense size. This can sometimes be
-drastically reduced by removing features from wxWindows that
+drastically reduced by removing features from wxWidgets that
are not used in your program. The most relevant such features
are
--with-odbc Enables ODBC code. This is disabled
by default because iODBC is under the
L-GPL license which is less liberal than
- wxWindows license.
+ wxWidgets license.
--without-libpng Disables PNG image format code.
make install
-You can remove any traces of wxWindows by typing
+You can remove any traces of wxWidgets by typing
make uninstall
clean:
rm -f *.o minimal
-This is certain to become the standard way unless we decide
-to stick to tmake.
-
-If your application uses only some of wxWindows libraries, you can
+If your application uses only some of wxWidgets libraries, you can
specify required libraries when running wx-config. For example,
`wx-config --libs=html,core` will only output link command to link
with libraries required by core GUI classes and wxHTML classes. See
the manual for more information on the libraries.
2) The other way creates a project within the source code
-directories of wxWindows. For this endeavour, you'll need
+directories of wxWidgets. For this endeavour, you'll need
GNU autoconf version 2.14 and add an entry to your Makefile.in
to the bottom of the configure.in script and run autoconf
and configure before you can type make.
projects / wxWidgets.git / blobdiff