## This file defines the interface to Scintilla
+## Copyright 2000-2003 by Neil Hodgson <neilh@scintilla.org>
+## The License.txt file describes the conditions under which this software may be distributed.
+
## A line starting with ## is a pure comment and should be stripped by readers.
## A line starting with #! is for future shbang use
-## A line starting with # followed by a space is a documentation comment and refers
+## A line starting with # followed by a space is a documentation comment and refers
## to the next feature definition.
## Each feature is defined by a line starting with fun, get, set, val or evt.
## set -> a property set function
## val -> definition of a constant
## evt -> an event
+## enu -> associate an enumeration with a set of vals with a prefix
+## lex -> associate a lexer with the lexical classes it produces
+##
## All other feature names should be ignored. They may be defined in the future.
## A property may have a set function, a get function or both. Each will have
## "Get" or "Set" in their names and the corresponding name will have the obvious switch.
## A property may be subscripted, in which case the first parameter is the subscript.
## fun, get, and set features have a strict syntax:
## <featureType><ws><returnType><ws><name>[=<number](<param>,<param>)
-## param is <paramType><ws><paramName>[=<value>]
+## where <ws> stands for white space.
+## param may be empty (null value) or is <paramType><ws><paramName>[=<value>]
## Additional white space is allowed between elements.
## The syntax for evt is <featureType><ws><returnType><ws><name>[=<number]([<param>[,<param>]*])
## Feature names that contain an underscore are defined by Windows, so in these
## cases, using the Windows definition is preferred where available.
+## The feature numbers are stable so features will not be renumbered.
+## Features may be removed but they will go through a period of deprecation
+## before removal which is signalled by moving them into the Deprecated category.
+##
+## enu has the syntax enu<ws><enumeration>=<prefix>[<ws><prefix>]* where all the val
+## features in this file starting with a given <prefix> are considered part of the
+## enumeration.
+##
+## lex has the syntax lex<ws><name>=<lexerVal><ws><prefix>[<ws><prefix>]*
+## where name is a reasonably capitalised (Python, XML) identifier or UI name,
+## lexerVal is the val used to specify the lexer, and the list of prefixes is similar
+## to enu. The name may not be the same as that used within the lexer so the lexerVal
+## should be used to tie these entities together.
## Types:
## void
## position -> integer position in a document
## colour -> colour integer containing red, green and blue bytes.
## string -> pointer to const character
-## stringresult -> pointer to character
+## stringresult -> pointer to character, NULL-> return size of result
## cells -> pointer to array of cells, each cell containing a style byte and character byte
-## charrange -> range of a min and a max position
-## charrangeresult -> like charrange, but output param
-## textrange -> charrange + output string
+## textrange -> range of a min and a max position with an output string
## findtext -> searchrange, text -> foundposition
-## findtextex -> searchrange
## keymod -> integer containing key in low half and modifiers in high half
-## countedstring
## formatrange
+## Types no longer used:
+## findtextex -> searchrange
+## charrange -> range of a min and a max position
+## charrangeresult -> like charrange, but output param
+## countedstring
## point -> x,y
## pointresult -> like point, but output param
## rectangle -> left,top,right,bottom
-## Client code should ignore definitions containing types it does not understand, except
+## Client code should ignore definitions containing types it does not understand, except
## for possibly #defining the constants
-cat Basics
+## Line numbers and positions start at 0.
+## String arguments may contain NUL ('\0') characters where the calls provide a length
+## argument and retrieve NUL characters. All retrieved strings except for those retrieved
+## by GetLine also have a NUL appended but client code should calculate the size that
+## will be returned rather than relying upon the NUL whenever possible. Allow for the
+## extra NUL character when allocating buffers. The size to allocate for a stringresult
+## can be determined by calling with a NULL (0) pointer.
+
+cat Basics
################################################
## For Scintilla.h
val INVALID_POSITION=-1
-# Define start of Scintilla messages to be greater than all edit (EM_*) messages
+# Define start of Scintilla messages to be greater than all Windows edit (EM_*) messages
# as many EM_ messages can be used although that use is deprecated.
val SCI_START=2000
val SCI_OPTIONAL_START=3000
val SCI_LEXER_START=4000
-# Add text to the document
+# Add text to the document at current position.
fun void AddText=2001(int length, string text)
-# Add array of cells to document
+# Add array of cells to document.
fun void AddStyledText=2002(int length, cells c)
-# Insert string at a position
+# Insert string at a position.
fun void InsertText=2003(position pos, string text)
-# Delete all text in the document
+# Delete all text in the document.
fun void ClearAll=2004(,)
-# Set all style bytes to 0, remove all folding information
+# Set all style bytes to 0, remove all folding information.
fun void ClearDocumentStyle=2005(,)
-# The number of characters in the document
+# Returns the number of characters in the document.
get int GetLength=2006(,)
-# Returns the character byte at the position
+# Returns the character byte at the position.
get int GetCharAt=2007(position pos,)
-# Returns the position of the caret
+# Returns the position of the caret.
get position GetCurrentPos=2008(,)
-# Returns the position of the opposite end of the selection to the caret
+# Returns the position of the opposite end of the selection to the caret.
get position GetAnchor=2009(,)
-# Returns the style byte at the position
+# Returns the style byte at the position.
get int GetStyleAt=2010(position pos,)
-# Redoes the next action on the undo history
+# Redoes the next action on the undo history.
fun void Redo=2011(,)
-# Choose between collecting actions into the undo
+# Choose between collecting actions into the undo
# history and discarding them.
set void SetUndoCollection=2012(bool collectUndo,)
# Select all the text in the document.
fun void SelectAll=2013(,)
-# Remember the current position in the undo history as the position
+# Remember the current position in the undo history as the position
# at which the document was saved.
fun void SetSavePoint=2014(,)
# Retrieve a buffer of cells.
-# Returns the number of bytes in the buffer not including terminating nulls.
+# Returns the number of bytes in the buffer not including terminating NULs.
fun int GetStyledText=2015(, textrange tr)
-# Are there any redoable actions in the undo history.
+# Are there any redoable actions in the undo history?
fun bool CanRedo=2016(,)
-# Retrieve the line number at which a particular marker is located
+# Retrieve the line number at which a particular marker is located.
fun int MarkerLineFromHandle=2017(int handle,)
# Delete a marker.
# Is undo history being collected?
get bool GetUndoCollection=2019(,)
+enu WhiteSpace=SCWS_
val SCWS_INVISIBLE=0
val SCWS_VISIBLEALWAYS=1
val SCWS_VISIBLEAFTERINDENT=2
set void SetViewWS=2021(int viewWS,)
# Find the position from a point within the window.
-fun int PositionFromPoint=2022(int x, int y)
+fun position PositionFromPoint=2022(int x, int y)
+
+# Find the position from a point within the window but return
+# INVALID_POSITION if not close to text.
+fun position PositionFromPointClose=2023(int x, int y)
# Set caret to start of a line and ensure it is visible.
fun void GotoLine=2024(int line,)
# Retrieve the position of the last correctly styled character.
get position GetEndStyled=2028(,)
-# Convert all line endings in the document to use the current mode.
-fun void ConvertEOLs=2029(,)
-
+enu EndOfLine=SC_EOL_
val SC_EOL_CRLF=0
val SC_EOL_CR=1
val SC_EOL_LF=2
+# Convert all line endings in the document to one mode.
+fun void ConvertEOLs=2029(int eolMode,)
+
# Retrieve the current end of line mode - one of CRLF, CR, or LF.
get int GetEOLMode=2030(,)
set void SetEOLMode=2031(int eolMode,)
# Set the current styling position to pos and the styling mask to mask.
-# The styling mask can be used to protect some bits in each styling byte from
-# modification.
+# The styling mask can be used to protect some bits in each styling byte from modification.
fun void StartStyling=2032(position pos, int mask)
# Change style from current styling position for length characters to a style
# and move the current styling position to after this newly styled segment.
fun void SetStyling=2033(int length, int style)
-# Is drawing done first into a buffer or direct to the screen.
+# Is drawing done first into a buffer or direct to the screen?
get bool GetBufferedDraw=2034(,)
# If drawing is buffered then each line of text is drawn into a bitmap buffer
# before drawing it to the screen to avoid flicker.
set void SetBufferedDraw=2035(bool buffered,)
-# Change the visible size of a tab to be a multiple of the width of a space
-# character.
+# Change the visible size of a tab to be a multiple of the width of a space character.
set void SetTabWidth=2036(int tabWidth,)
-# Retrieve the visible size of a tab.
+# Retrieve the visible size of a tab.
get int GetTabWidth=2121(,)
# The SC_CP_UTF8 value can be used to enter Unicode mode.
# This is the same value as CP_UTF8 in Windows
val SC_CP_UTF8=65001
+# The SC_CP_DBCS value can be used to indicate a DBCS mode for GTK+.
+val SC_CP_DBCS=1
+
# Set the code page used to interpret the bytes of the document as characters.
# The SC_CP_UTF8 value can be used to enter Unicode mode.
set void SetCodePage=2037(int codePage,)
-# In palette mode, Scintilla uses the environments palette calls to display
+# In palette mode, Scintilla uses the environment's palette calls to display
# more colours. This may lead to ugly displays.
set void SetUsePalette=2039(bool usePalette,)
+enu MarkerSymbol=SC_MARK_
val MARKER_MAX=31
val SC_MARK_CIRCLE=0
val SC_MARK_ROUNDRECT=1
val SC_MARK_MINUS=7
val SC_MARK_PLUS=8
+# Shapes used for outlining column.
+val SC_MARK_VLINE=9
+val SC_MARK_LCORNER=10
+val SC_MARK_TCORNER=11
+val SC_MARK_BOXPLUS=12
+val SC_MARK_BOXPLUSCONNECTED=13
+val SC_MARK_BOXMINUS=14
+val SC_MARK_BOXMINUSCONNECTED=15
+val SC_MARK_LCORNERCURVE=16
+val SC_MARK_TCORNERCURVE=17
+val SC_MARK_CIRCLEPLUS=18
+val SC_MARK_CIRCLEPLUSCONNECTED=19
+val SC_MARK_CIRCLEMINUS=20
+val SC_MARK_CIRCLEMINUSCONNECTED=21
+
+# Invisible mark that only sets the line background color.
+val SC_MARK_BACKGROUND=22
+val SC_MARK_DOTDOTDOT=23
+val SC_MARK_ARROWS=24
+val SC_MARK_PIXMAP=25
+val SC_MARK_FULLRECT=26
+
+val SC_MARK_CHARACTER=10000
+
+enu MarkerOutline=SC_MARKNUM_
+# Markers used for outlining column.
+val SC_MARKNUM_FOLDEREND=25
+val SC_MARKNUM_FOLDEROPENMID=26
+val SC_MARKNUM_FOLDERMIDTAIL=27
+val SC_MARKNUM_FOLDERTAIL=28
+val SC_MARKNUM_FOLDERSUB=29
val SC_MARKNUM_FOLDER=30
val SC_MARKNUM_FOLDEROPEN=31
+val SC_MASK_FOLDERS=0xFE000000
+
# Set the symbol used for a particular marker number.
fun void MarkerDefine=2040(int markerNumber, int markerSymbol)
# Set the background colour used for a particular marker number.
fun void MarkerSetBack=2042(int markerNumber, colour back)
-# Add a marker to a line.
-fun void MarkerAdd=2043(int line, int markerNumber)
+# Add a marker to a line, returning an ID which can be used to find or delete the marker.
+fun int MarkerAdd=2043(int line, int markerNumber)
-# Delete a marker from a line
+# Delete a marker from a line.
fun void MarkerDelete=2044(int line, int markerNumber)
-# Delete all markers with a particular number from all lines
+# Delete all markers with a particular number from all lines.
fun void MarkerDeleteAll=2045(int markerNumber,)
# Get a bit mask of all the markers set on a line.
# Find the previous line before lineStart that includes a marker in mask.
fun int MarkerPrevious=2048(int lineStart, int markerMask)
+# Define a marker from a pixmap.
+fun void MarkerDefinePixmap=2049(int markerNumber, string pixmap)
+
+# Add a set of markers to a line.
+fun void MarkerAddSet=2466(int line, int set)
+
+enu MarginType=SC_MARGIN_
val SC_MARGIN_SYMBOL=0
val SC_MARGIN_NUMBER=1
# Retrieve the mouse click sensitivity of a margin.
get bool GetMarginSensitiveN=2247(int margin,)
+# Styles in range 32..37 are predefined for parts of the UI and are not used as normal styles.
+# Styles 38 and 39 are for future use.
+enu StylesCommon=STYLE_
val STYLE_DEFAULT=32
val STYLE_LINENUMBER=33
val STYLE_BRACELIGHT=34
val STYLE_BRACEBAD=35
val STYLE_CONTROLCHAR=36
val STYLE_INDENTGUIDE=37
+val STYLE_LASTPREDEFINED=39
val STYLE_MAX=127
# Character set identifiers are used in StyleSetCharacterSet.
# The values are the same as the Windows *_CHARSET values.
+enu CharacterSet=SC_CHARSET_
val SC_CHARSET_ANSI=0
val SC_CHARSET_DEFAULT=1
val SC_CHARSET_BALTIC=186
val SC_CHARSET_MAC=77
val SC_CHARSET_OEM=255
val SC_CHARSET_RUSSIAN=204
+val SC_CHARSET_CYRILLIC=1251
val SC_CHARSET_SHIFTJIS=128
val SC_CHARSET_SYMBOL=2
val SC_CHARSET_TURKISH=162
val SC_CHARSET_ARABIC=178
val SC_CHARSET_VIETNAMESE=163
val SC_CHARSET_THAI=222
+val SC_CHARSET_8859_15=1000
# Clear all the styles and make equivalent to the global default style.
set void StyleClearAll=2050(,)
# Set a style to be underlined or not.
set void StyleSetUnderline=2059(int style, bool underline)
+enu CaseVisible=SC_CASE_
+val SC_CASE_MIXED=0
+val SC_CASE_UPPER=1
+val SC_CASE_LOWER=2
+# Set a style to be mixed case, or to force upper or lower case.
+set void StyleSetCase=2060(int style, int caseForce)
+
# Set the character set of the font in a style.
set void StyleSetCharacterSet=2066(int style, int characterSet)
+# Set a style to be a hotspot or not.
+set void StyleSetHotSpot=2409(int style, bool hotspot)
+
# Set the foreground colour of the selection and whether to use this setting.
fun void SetSelFore=2067(bool useSetting, colour fore)
# When key+modifier combination km is pressed perform msg.
fun void AssignCmdKey=2070(keymod km, int msg)
-# When key+modifier combination km do nothing.
+# When key+modifier combination km is pressed do nothing.
fun void ClearCmdKey=2071(keymod km,)
# Drop all key mappings.
# Set a style to be visible or not.
set void StyleSetVisible=2074(int style, bool visible)
-# Get the time in milliseconds that the caret is on and off.
+# Get the time in milliseconds that the caret is on and off.
get int GetCaretPeriod=2075(,)
# Get the time in milliseconds that the caret is on and off. 0 = steady on.
set void SetCaretPeriod=2076(int periodMilliseconds,)
-# Set the set of characters making up words for when moving or selecting
-# by word.
+# Set the set of characters making up words for when moving or selecting by word.
+# First sets deaults like SetCharsDefault.
set void SetWordChars=2077(, string characters)
# Start a sequence of actions that is undone and redone as a unit.
# End a sequence of actions that is undone and redone as a unit.
fun void EndUndoAction=2079(,)
+enu IndicatorStyle=INDIC_
val INDIC_MAX=7
val INDIC_PLAIN=0
val INDIC_SQUIGGLE=1
val INDIC_TT=2
val INDIC_DIAGONAL=3
val INDIC_STRIKE=4
-val INDIC0_MASK=32
-val INDIC1_MASK=64
-val INDIC2_MASK=128
-val INDICS_MASK=INDIC0_MASK | INDIC1_MASK | INDIC2_MASK
+val INDIC_HIDDEN=5
+val INDIC_BOX=6
+val INDIC0_MASK=0x20
+val INDIC1_MASK=0x40
+val INDIC2_MASK=0x80
+val INDICS_MASK=0xE0
# Set an indicator to plain, squiggle or TT.
set void IndicSetStyle=2080(int indic, int style)
# Retrieve the foreground colour of an indicator.
get colour IndicGetFore=2083(int indic,)
-# Divide each styling byte into lexical class bits (default:5) and indicator
-# bits (default:3). If a lexer requires more than 32 lexical states, then this
+# Set the foreground colour of all whitespace and whether to use this setting.
+fun void SetWhitespaceFore=2084(bool useSetting, colour fore)
+
+# Set the background colour of all whitespace and whether to use this setting.
+fun void SetWhitespaceBack=2085(bool useSetting, colour back)
+
+# Divide each styling byte into lexical class bits (default: 5) and indicator
+# bits (default: 3). If a lexer requires more than 32 lexical states, then this
# is used to expand the possible states.
set void SetStyleBits=2090(int bits,)
# Retrieve the extra styling information for a line.
get int GetLineState=2093(int line,)
-# Retrieve the last line number that has line state.
+# Retrieve the last line number that has line state.
get int GetMaxLineState=2094(,)
+# Is the background of the line containing the caret in a different colour?
+get bool GetCaretLineVisible=2095(,)
+
+# Display the background of the line containing the caret in a different colour.
+set void SetCaretLineVisible=2096(bool show,)
+
+# Get the colour of the background of the line containing the caret.
+get colour GetCaretLineBack=2097(,)
+
+# Set the colour of the background of the line containing the caret.
+set void SetCaretLineBack=2098(colour back,)
+
+# Set a style to be changeable or not (read only).
+# Experimental feature, currently buggy.
+set void StyleSetChangeable=2099(int style, bool changeable)
+
# Display a auto-completion list.
# The lenEntered parameter indicates how many characters before
# the caret should be used to provide context.
# Is there an auto-completion list visible?
fun bool AutoCActive=2102(,)
-# Retrieve the position of the caret when the auto-completion list was
-# displayed.
+# Retrieve the position of the caret when the auto-completion list was displayed.
fun position AutoCPosStart=2103(,)
# User has selected an item so remove the list and insert the selection.
# Define a set of character that when typed cancel the auto-completion list.
fun void AutoCStops=2105(, string characterSet)
-# Change the separator character in the string setting up an auto-completion
-# list. Default is space but can be changed if items contain space.
+# Change the separator character in the string setting up an auto-completion list.
+# Default is space but can be changed if items contain space.
set void AutoCSetSeparator=2106(int separatorCharacter,)
# Retrieve the auto-completion list separator character.
# Select the item in the auto-completion list that starts with a string.
fun void AutoCSelect=2108(, string text)
-# Should the auto-completion list be cancelled if the user backspaces to a
-# position before where the box was created.
+# Should the auto-completion list be cancelled if the user backspaces to a
+# position before where the box was created.
set void AutoCSetCancelAtStart=2110(bool cancel,)
# Retrieve whether auto-completion cancelled by backspacing before start.
get bool AutoCGetCancelAtStart=2111(,)
-# Define a set of character that when typed fills up the selected word.
+# Define a set of characters that when typed will cause the autocompletion to
+# choose the selected item.
set void AutoCSetFillUps=2112(, string characterSet)
-# Should a single item auto-completion list automatically choose the item.
+# Should a single item auto-completion list automatically choose the item.
set void AutoCSetChooseSingle=2113(bool chooseSingle,)
-# Retrieve whether a single item auto-completion list automatically choose the item.
+# Retrieve whether a single item auto-completion list automatically choose the item.
get bool AutoCGetChooseSingle=2114(,)
# Set whether case is significant when performing auto-completion searches.
set void AutoCSetIgnoreCase=2115(bool ignoreCase,)
-# Retrieve state of ignore case flag.
+# Retrieve state of ignore case flag.
get bool AutoCGetIgnoreCase=2116(,)
+# Display a list of strings and send notification when user chooses one.
+fun void UserListShow=2117(int listType, string itemList)
+
+# Set whether or not autocompletion is hidden automatically when nothing matches.
+set void AutoCSetAutoHide=2118(bool autoHide,)
+
+# Retrieve whether or not autocompletion is hidden automatically when nothing matches.
+get bool AutoCGetAutoHide=2119(,)
+
+# Set whether or not autocompletion deletes any word characters
+# after the inserted text upon completion.
+set void AutoCSetDropRestOfWord=2270(bool dropRestOfWord,)
+
+# Retrieve whether or not autocompletion deletes any word characters
+# after the inserted text upon completion.
+get bool AutoCGetDropRestOfWord=2271(,)
+
+# Register an XPM image for use in autocompletion lists.
+fun void RegisterImage=2405(int type, string xpmData)
+
+# Clear all the registered XPM images.
+fun void ClearRegisteredImages=2408(,)
+
+# Retrieve the auto-completion list type-separator character.
+get int AutoCGetTypeSeparator=2285(,)
+
+# Change the type-separator character in the string setting up an auto-completion list.
+# Default is '?' but can be changed if items contain '?'.
+set void AutoCSetTypeSeparator=2286(int separatorCharacter,)
+
+# Set the maximum width, in characters, of auto-completion and user lists.
+# Set to 0 to autosize to fit longest item, which is the default.
+set void AutoCSetMaxWidth=2208(int characterCount,)
+
+# Get the maximum width, in characters, of auto-completion and user lists.
+get int AutoCGetMaxWidth=2209(,)
+
+# Set the maximum height, in rows, of auto-completion and user lists.
+# The default is 5 rows.
+set void AutoCSetMaxHeight=2210(int rowCount,)
+
+# Set the maximum height, in rows, of auto-completion and user lists.
+get int AutoCGetMaxHeight=2211(,)
+
# Set the number of spaces used for one level of indentation.
set void SetIndent=2122(int indentSize,)
# Returns the print magnification.
get int GetPrintMagnification=2147(,)
+enu PrintOption=SC_PRINT_
# PrintColourMode - use same colours as screen.
val SC_PRINT_NORMAL=0
# PrintColourMode - invert the light value of each style for printing.
val SC_PRINT_INVERTLIGHT=1
# PrintColourMode - force black text on white background for printing.
val SC_PRINT_BLACKONWHITE=2
+# PrintColourMode - text stays coloured, but all background is forced to be white for printing.
+val SC_PRINT_COLOURONWHITE=3
+# PrintColourMode - only the default-background is forced to be white for printing.
+val SC_PRINT_COLOURONWHITEDEFAULTBG=4
# Modify colours when printing for clearer printed text.
set void SetPrintColourMode=2148(int mode,)
# Returns the print colour mode.
get int GetPrintColourMode=2149(,)
-val SCFIND_DOWN=1
+enu FindOption=SCFIND_
val SCFIND_WHOLEWORD=2
val SCFIND_MATCHCASE=4
val SCFIND_WORDSTART=0x00100000
-# SCFIND_REGEXP is not yet implemented.
val SCFIND_REGEXP=0x00200000
+val SCFIND_POSIX=0x00400000
# Find some text in the document.
fun position FindText=2150(int flags, findtext ft)
-# On Windows will draw the document into a display context such as a printer.
-fun void FormatRange=2151(bool draw, formatrange fr)
+# On Windows, will draw the document into a display context such as a printer.
+fun position FormatRange=2151(bool draw, formatrange fr)
-# Retrieve the line at the top of the display.
+# Retrieve the display line at the top of the display.
get int GetFirstVisibleLine=2152(,)
# Retrieve the contents of a line.
get int GetLineCount=2154(,)
# Sets the size in pixels of the left margin.
-set void SetMarginLeft=2155(, int width)
+set void SetMarginLeft=2155(, int pixelWidth)
# Returns the size in pixels of the left margin.
get int GetMarginLeft=2156(,)
# Sets the size in pixels of the right margin.
-set void SetMarginRight=2157(, int width)
+set void SetMarginRight=2157(, int pixelWidth)
# Returns the size in pixels of the right margin.
get int GetMarginRight=2158(,)
# Retrieve the selected text.
# Return the length of the text.
-fun int GetSelText=2161(,stringresult text)
+fun int GetSelText=2161(, stringresult text)
# Retrieve a range of text.
# Return the length of the text.
fun int LineFromPosition=2166(position pos,)
# Retrieve the position at the start of a line.
-fun int PositionFromLine=2167(int line,)
+fun position PositionFromLine=2167(int line,)
# Scroll horizontally and vertically.
fun void LineScroll=2168(int columns, int lines)
# Will a paste succeed?
fun bool CanPaste=2173(,)
-# Are there any undoable actions in the undo history.
+# Are there any undoable actions in the undo history?
fun bool CanUndo=2174(,)
# Delete the undo history.
# the function returned by GetDirectFunction.
get int GetDirectPointer=2185(,)
-# Set to overtype (true) or insert mode
+# Set to overtype (true) or insert mode.
set void SetOvertype=2186(bool overtype,)
# Returns true if overtype mode is active otherwise false is returned.
get bool GetOvertype=2187(,)
+# Set the width of the insert mode caret.
+set void SetCaretWidth=2188(int pixelWidth,)
+
+# Returns the width of the insert mode caret.
+get int GetCaretWidth=2189(,)
+
+# Sets the position that starts the target which is used for updating the
+# document without affecting the scroll position.
+set void SetTargetStart=2190(position pos,)
+
+# Get the position that starts the target.
+get position GetTargetStart=2191(,)
+
+# Sets the position that ends the target which is used for updating the
+# document without affecting the scroll position.
+set void SetTargetEnd=2192(position pos,)
+
+# Get the position that ends the target.
+get position GetTargetEnd=2193(,)
+
+# Replace the target text with the argument text.
+# Text is counted so it can contain NULs.
+# Returns the length of the replacement text.
+fun int ReplaceTarget=2194(int length, string text)
+
+# Replace the target text with the argument text after \d processing.
+# Text is counted so it can contain NULs.
+# Looks for \d where d is between 1 and 9 and replaces these with the strings
+# matched in the last search operation which were surrounded by \( and \).
+# Returns the length of the replacement text including any change
+# caused by processing the \d patterns.
+fun int ReplaceTargetRE=2195(int length, string text)
+
+# Search for a counted string in the target and set the target to the found
+# range. Text is counted so it can contain NULs.
+# Returns length of range or -1 for failure in which case target is not moved.
+fun int SearchInTarget=2197(int length, string text)
+
+# Set the search flags used by SearchInTarget.
+set void SetSearchFlags=2198(int flags,)
+
+# Get the search flags used by SearchInTarget.
+get int GetSearchFlags=2199(,)
+
# Show a call tip containing a definition near position pos.
fun void CallTipShow=2200(position pos, string definition)
# Set the background colour for the call tip.
set void CallTipSetBack=2205(colour back,)
+# Set the foreground colour for the call tip.
+set void CallTipSetFore=2206(colour fore,)
+
+# Set the foreground colour for the highlighted part of the call tip.
+set void CallTipSetForeHlt=2207(colour fore,)
+
# Find the display line of a document line taking hidden lines into account.
fun int VisibleFromDocLine=2220(int line,)
# Find the document line of a display line taking hidden lines into account.
fun int DocLineFromVisible=2221(int lineDisplay,)
+# The number of display lines needed to wrap a document line
+fun int WrapCount=2235(int line,)
+
+enu FoldLevel=SC_FOLDLEVEL
val SC_FOLDLEVELBASE=0x400
val SC_FOLDLEVELWHITEFLAG=0x1000
val SC_FOLDLEVELHEADERFLAG=0x2000
+val SC_FOLDLEVELBOXHEADERFLAG=0x4000
+val SC_FOLDLEVELBOXFOOTERFLAG=0x8000
+val SC_FOLDLEVELCONTRACTED=0x10000
+val SC_FOLDLEVELUNINDENT=0x20000
val SC_FOLDLEVELNUMBERMASK=0x0FFF
# Set the fold level of a line.
# Ensure a particular line is visible by expanding any header line hiding it.
fun void EnsureVisible=2232(int line,)
-# Set some debugging options for folding
+enu FoldFlag=SC_FOLDFLAG_
+val SC_FOLDFLAG_LINEBEFORE_EXPANDED=0x0002
+val SC_FOLDFLAG_LINEBEFORE_CONTRACTED=0x0004
+val SC_FOLDFLAG_LINEAFTER_EXPANDED=0x0008
+val SC_FOLDFLAG_LINEAFTER_CONTRACTED=0x0010
+val SC_FOLDFLAG_LEVELNUMBERS=0x0040
+val SC_FOLDFLAG_BOX=0x0001
+
+# Set some style options for folding.
fun void SetFoldFlags=2233(int flags,)
+# Ensure a particular line is visible by expanding any header line hiding it.
+# Use the currently set visibility policy to determine which range to display.
+fun void EnsureVisibleEnforcePolicy=2234(int line,)
+
+# Sets whether a tab pressed when caret is within indentation indents.
+set void SetTabIndents=2260(bool tabIndents,)
+
+# Does a tab pressed when caret is within indentation indent?
+get bool GetTabIndents=2261(,)
+
+# Sets whether a backspace pressed when caret is within indentation unindents.
+set void SetBackSpaceUnIndents=2262(bool bsUnIndents,)
+
+# Does a backspace pressed when caret is within indentation unindent?
+get bool GetBackSpaceUnIndents=2263(,)
+
+val SC_TIME_FOREVER=10000000
+
+# Sets the time the mouse must sit still to generate a mouse dwell event.
+set void SetMouseDwellTime=2264(int periodMilliseconds,)
+
+# Retrieve the time the mouse must sit still to generate a mouse dwell event.
+get int GetMouseDwellTime=2265(,)
+
+# Get position of start of word.
+fun int WordStartPosition=2266(position pos, bool onlyWordCharacters)
+
+# Get position of end of word.
+fun int WordEndPosition=2267(position pos, bool onlyWordCharacters)
+
+enu Wrap=SC_WRAP_
+val SC_WRAP_NONE=0
+val SC_WRAP_WORD=1
+val SC_WRAP_CHAR=2
+
+# Sets whether text is word wrapped.
+set void SetWrapMode=2268(int mode,)
+
+# Retrieve whether text is word wrapped.
+get int GetWrapMode=2269(,)
+
+enu WrapVisualFlag=SC_WRAPVISUALFLAG_
+val SC_WRAPVISUALFLAG_NONE=0x0000
+val SC_WRAPVISUALFLAG_END=0x0001
+val SC_WRAPVISUALFLAG_START=0x0002
+
+# Set the display mode of visual flags for wrapped lines.
+set void SetWrapVisualFlags=2460(int wrapVisualFlags,)
+
+# Retrive the display mode of visual flags for wrapped lines.
+get int GetWrapVisualFlags=2461(,)
+
+enu WrapVisualLocation=SC_WRAPVISUALFLAGLOC_
+val SC_WRAPVISUALFLAGLOC_DEFAULT=0x0000
+val SC_WRAPVISUALFLAGLOC_END_BY_TEXT=0x0001
+val SC_WRAPVISUALFLAGLOC_START_BY_TEXT=0x0002
+
+# Set the location of visual flags for wrapped lines.
+set void SetWrapVisualFlagsLocation=2462(int wrapVisualFlagsLocation,)
+
+# Retrive the location of visual flags for wrapped lines.
+get int GetWrapVisualFlagsLocation=2463(,)
+
+# Set the start indent for wrapped lines.
+set void SetWrapStartIndent=2464(int indent,)
+
+# Retrive the start indent for wrapped lines.
+get int GetWrapStartIndent=2465(,)
+
+enu LineCache=SC_CACHE_
+val SC_CACHE_NONE=0
+val SC_CACHE_CARET=1
+val SC_CACHE_PAGE=2
+val SC_CACHE_DOCUMENT=3
+
+# Sets the degree of caching of layout information.
+set void SetLayoutCache=2272(int mode,)
+
+# Retrieve the degree of caching of layout information.
+get int GetLayoutCache=2273(,)
+
+# Sets the document width assumed for scrolling.
+set void SetScrollWidth=2274(int pixelWidth,)
+
+# Retrieve the document width assumed for scrolling.
+get int GetScrollWidth=2275(,)
+
+# Measure the pixel width of some text in a particular style.
+# NUL terminated text argument.
+# Does not handle tab or control characters.
+fun int TextWidth=2276(int style, string text)
+
+# Sets the scroll range so that maximum scroll position has
+# the last line at the bottom of the view (default).
+# Setting this to false allows scrolling one page below the last line.
+set void SetEndAtLastLine=2277(bool endAtLastLine,)
+
+# Retrieve whether the maximum scroll position has the last
+# line at the bottom of the view.
+get bool GetEndAtLastLine=2278(,)
+
+# Retrieve the height of a particular line of text in pixels.
+fun int TextHeight=2279(int line,)
+
+# Show or hide the vertical scroll bar.
+set void SetVScrollBar=2280(bool show,)
+
+# Is the vertical scroll bar visible?
+get bool GetVScrollBar=2281(,)
+
+# Append a string to the end of the document without changing the selection.
+fun void AppendText=2282(int length, string text)
+
+# Is drawing done in two phases with backgrounds drawn before foregrounds?
+get bool GetTwoPhaseDraw=2283(,)
+
+# In twoPhaseDraw mode, drawing is performed in two phases, first the background
+# and then the foreground. This avoids chopping off characters that overlap the next run.
+set void SetTwoPhaseDraw=2284(bool twoPhase,)
+
+# Make the target range start and end be the same as the selection range start and end.
+fun void TargetFromSelection=2287(,)
+
+# Join the lines in the target.
+fun void LinesJoin=2288(,)
+
+# Split the lines in the target into lines that are less wide than pixelWidth
+# where possible.
+fun void LinesSplit=2289(int pixelWidth,)
+
+# Set the colours used as a chequerboard pattern in the fold margin
+fun void SetFoldMarginColour=2290(bool useSetting, colour back)
+fun void SetFoldMarginHiColour=2291(bool useSetting, colour fore)
+
+## New messages go here
+
## Start of key messages
# Move caret down one line.
fun void LineDown=2300(,)
# Delete the selection or if no selection, the character before the caret.
fun void DeleteBack=2326(,)
-# If selection is empty or all on one line replace the selection with a tab
-# character.
+# If selection is empty or all on one line replace the selection with a tab character.
# If more than one line selected, indent the lines.
fun void Tab=2327(,)
# Insert a Form Feed character.
fun void FormFeed=2330(,)
-# Move caret to before first visible character on line.
+# Move caret to before first visible character on line.
# If already there move to first character on line.
fun void VCHome=2331(,)
# Switch the current line with the previous.
fun void LineTranspose=2339(,)
+# Duplicate the current line.
+fun void LineDuplicate=2404(,)
+
# Transform the selection to lower case.
fun void LowerCase=2340(,)
# Scroll the document up, keeping the caret visible.
fun void LineScrollUp=2343(,)
-# How many characters are on a line, not including end of line characters.
+# Delete the selection or if no selection, the character before the caret.
+# Will not delete the character before at the start of a line.
+fun void DeleteBackNotLine=2344(,)
+
+# Move caret to first position on display line.
+fun void HomeDisplay=2345(,)
+
+# Move caret to first position on display line extending selection to
+# new caret position.
+fun void HomeDisplayExtend=2346(,)
+
+# Move caret to last position on display line.
+fun void LineEndDisplay=2347(,)
+
+# Move caret to last position on display line extending selection to new
+# caret position.
+fun void LineEndDisplayExtend=2348(,)
+
+# These are like their namesakes Home(Extend)?, LineEnd(Extend)?, VCHome(Extend)?
+# except they behave differently when word-wrap is enabled:
+# They go first to the start / end of the display line, like (Home|LineEnd)Display
+# The difference is that, the cursor is already at the point, it goes on to the start
+# or end of the document line, as appropriate for (Home|LineEnd|VCHome)(Extend)?.
+
+fun void HomeWrap=2349(,)
+fun void HomeWrapExtend=2450(,)
+fun void LineEndWrap=2451(,)
+fun void LineEndWrapExtend=2452(,)
+fun void VCHomeWrap=2453(,)
+fun void VCHomeWrapExtend=2454(,)
+
+# Copy the line containing the caret.
+fun void LineCopy=2455(,)
+
+# Move the caret inside current view if it's not there already.
+fun void MoveCaretInsideView=2401(,)
+
+# How many characters are on a line, not including end of line characters?
fun int LineLength=2350(int line,)
# Highlight the characters at two positions.
-fun void BraceHighlight=2351(position pos1,position pos2)
+fun void BraceHighlight=2351(position pos1, position pos2)
# Highlight the character at a position indicating there is no matching brace.
fun void BraceBadLight=2352(position pos,)
# Find the position of a matching brace or INVALID_POSITION if no match.
fun position BraceMatch=2353(position pos,)
-# Are the end of line characters visible.
+# Are the end of line characters visible?
get bool GetViewEOL=2355(,)
-# Make the end of line characters visible or invisible
+# Make the end of line characters visible or invisible.
set void SetViewEOL=2356(bool visible,)
# Retrieve a pointer to the document object.
get int GetDocPointer=2357(,)
# Change the document object used.
-set void SetDocPointer=2358(int pointer,)
+set void SetDocPointer=2358(, int pointer)
# Set which document modification events are sent to the container.
set void SetModEventMask=2359(int mask,)
+enu EdgeVisualStyle=EDGE_
val EDGE_NONE=0
val EDGE_LINE=1
val EDGE_BACKGROUND=2
# Retrieve the column number which text should be kept within.
get int GetEdgeColumn=2360(,)
-# Set the column number of the edge.
-# If text goes past the edge then it is highlighted.
+# Set the column number of the edge.
+# If text goes past the edge then it is highlighted.
set void SetEdgeColumn=2361(int column,)
# Retrieve the edge highlight mode.
fun void SearchAnchor=2366(,)
# Find some text starting at the search anchor.
+# Does not ensure the selection is visible.
fun int SearchNext=2367(int flags, string text)
# Find some text starting at the search anchor and moving backwards.
+# Does not ensure the selection is visible.
fun int SearchPrev=2368(int flags, string text)
-# Show caret within N lines of edge when it's scrolled to view
-val CARET_SLOP=0x01
-# Center caret on screen when it's scrolled to view
-val CARET_CENTER=0x02
-# OR this with CARET_CENTER to reposition even when visible, or
-# OR this with CARET_SLOP to reposition whenever outside slop border
-val CARET_STRICT=0x04
-# Set the way the line the caret is on is kept visible.
-fun void SetCaretPolicy=2369(int caretPolicy, int caretSlop)
-
# Retrieves the number of lines completely visible.
get int LinesOnScreen=2370(,)
# the wrong mouse button.
fun void UsePopUp=2371(bool allowPopUp,)
-# Is the selection a rectangular. The alternative is the more common stream selection.
+# Is the selection rectangular? The alternative is the more common stream selection.
get bool SelectionIsRectangle=2372(,)
-# Set the zoom level. This number of points is added to the size of all fonts.
+# Set the zoom level. This number of points is added to the size of all fonts.
# It may be positive to magnify or negative to reduce.
set void SetZoom=2373(int zoom,)
# Retrieve the zoom level.
get int GetZoom=2374(,)
-# Create a new document object.
+# Create a new document object.
# Starts with reference count of 1 and not selected into editor.
fun int CreateDocument=2375(,)
# Extend life of document.
# Get which document modification events are sent to the container.
get int GetModEventMask=2378(,)
+# Change internal focus flag.
+set void SetFocus=2380(bool focus,)
+# Get internal focus flag.
+get bool GetFocus=2381(,)
+
+# Change error status - 0 = OK.
+set void SetStatus=2382(int statusCode,)
+# Get error status.
+get int GetStatus=2383(,)
+
+# Set whether the mouse is captured when its button is pressed.
+set void SetMouseDownCaptures=2384(bool captures,)
+# Get whether mouse gets captured.
+get bool GetMouseDownCaptures=2385(,)
+
+enu CursorShape=SC_CURSOR
+val SC_CURSORNORMAL=-1
+val SC_CURSORWAIT=4
+# Sets the cursor to one of the SC_CURSOR* values.
+set void SetCursor=2386(int cursorType,)
+# Get cursor type.
+get int GetCursor=2387(,)
+
+# Change the way control characters are displayed:
+# If symbol is < 32, keep the drawn way, else, use the given character.
+set void SetControlCharSymbol=2388(int symbol,)
+# Get the way control characters are displayed.
+get int GetControlCharSymbol=2389(,)
+
+# Move to the previous change in capitalisation.
+fun void WordPartLeft=2390(,)
+# Move to the previous change in capitalisation extending selection
+# to new caret position.
+fun void WordPartLeftExtend=2391(,)
+# Move to the change next in capitalisation.
+fun void WordPartRight=2392(,)
+# Move to the next change in capitalisation extending selection
+# to new caret position.
+fun void WordPartRightExtend=2393(,)
+
+# Constants for use with SetVisiblePolicy, similar to SetCaretPolicy.
+val VISIBLE_SLOP=0x01
+val VISIBLE_STRICT=0x04
+# Set the way the display area is determined when a particular line
+# is to be moved to by Find, FindNext, GotoLine, etc.
+fun void SetVisiblePolicy=2394(int visiblePolicy, int visibleSlop)
+
+# Delete back from the current position to the start of the line.
+fun void DelLineLeft=2395(,)
+
+# Delete forwards from the current position to the end of the line.
+fun void DelLineRight=2396(,)
+
+# Get and Set the xOffset (ie, horizonal scroll position).
+set void SetXOffset=2397(int newOffset,)
+get int GetXOffset=2398(,)
+
+# Set the last x chosen value to be the caret x position.
+fun void ChooseCaretX=2399(,)
+
# Set the focus to this Scintilla widget.
-# GTK+ Specific
+# GTK+ Specific.
fun void GrabFocus=2400(,)
+enu CaretPolicy = CARET_
+# Caret policy, used by SetXCaretPolicy and SetYCaretPolicy.
+# If CARET_SLOP is set, we can define a slop value: caretSlop.
+# This value defines an unwanted zone (UZ) where the caret is... unwanted.
+# This zone is defined as a number of pixels near the vertical margins,
+# and as a number of lines near the horizontal margins.
+# By keeping the caret away from the edges, it is seen within its context,
+# so it is likely that the identifier that the caret is on can be completely seen,
+# and that the current line is seen with some of the lines following it which are
+# often dependent on that line.
+val CARET_SLOP=0x01
+# If CARET_STRICT is set, the policy is enforced... strictly.
+# The caret is centred on the display if slop is not set,
+# and cannot go in the UZ if slop is set.
+val CARET_STRICT=0x04
+# If CARET_JUMPS is set, the display is moved more energetically
+# so the caret can move in the same direction longer before the policy is applied again.
+val CARET_JUMPS=0x10
+# If CARET_EVEN is not set, instead of having symmetrical UZs,
+# the left and bottom UZs are extended up to right and top UZs respectively.
+# This way, we favour the displaying of useful information: the begining of lines,
+# where most code reside, and the lines after the caret, eg. the body of a function.
+val CARET_EVEN=0x08
+
+# Set the way the caret is kept visible when going sideway.
+# The exclusion zone is given in pixels.
+fun void SetXCaretPolicy=2402(int caretPolicy, int caretSlop)
+
+# Set the way the line the caret is on is kept visible.
+# The exclusion zone is given in lines.
+fun void SetYCaretPolicy=2403(int caretPolicy, int caretSlop)
+
+# Set printing to line wrapped (SC_WRAP_WORD) or not line wrapped (SC_WRAP_NONE).
+set void SetPrintWrapMode=2406(int mode,)
+
+# Is printing line wrapped?
+get int GetPrintWrapMode=2407(,)
+
+# Set a fore colour for active hotspots.
+set void SetHotspotActiveFore=2410(bool useSetting, colour fore)
+
+# Set a back colour for active hotspots.
+set void SetHotspotActiveBack=2411(bool useSetting, colour back)
+
+# Enable / Disable underlining active hotspots.
+set void SetHotspotActiveUnderline=2412(bool underline,)
+
+# Limit hotspots to single line so hotspots on two lines don't merge.
+set void SetHotspotSingleLine=2421(bool singleLine,)
+
+# Move caret between paragraphs (delimited by empty lines).
+fun void ParaDown=2413(,)
+fun void ParaDownExtend=2414(,)
+fun void ParaUp=2415(,)
+fun void ParaUpExtend=2416(,)
+
+# Given a valid document position, return the previous position taking code
+# page into account. Returns 0 if passed 0.
+fun position PositionBefore=2417(position pos,)
+
+# Given a valid document position, return the next position taking code
+# page into account. Maximum value returned is the last position in the document.
+fun position PositionAfter=2418(position pos,)
+
+# Copy a range of text to the clipboard. Positions are clipped into the document.
+fun void CopyRange=2419(position start, position end)
+
+# Copy argument text to the clipboard.
+fun void CopyText=2420(int length, string text)
+
+# Selection modes
+enu SelectionMode=SC_SEL_
+val SC_SEL_STREAM=0
+val SC_SEL_RECTANGLE=1
+val SC_SEL_LINES=2
+
+# Set the selection mode to stream (SC_SEL_STREAM) or rectangular (SC_SEL_RECTANGLE) or
+# by lines (SC_SEL_LINES).
+set void SetSelectionMode=2422(int mode,)
+
+# Get the mode of the current selection.
+get int GetSelectionMode=2423(,)
+
+# Retrieve the position of the start of the selection at the given line (INVALID_POSITION if no selection on this line).
+fun position GetLineSelStartPosition=2424(int line,)
+
+# Retrieve the position of the end of the selection at the given line (INVALID_POSITION if no selection on this line).
+fun position GetLineSelEndPosition=2425(int line,)
+
+## RectExtended rectangular selection moves
+# Move caret down one line, extending rectangular selection to new caret position.
+fun void LineDownRectExtend=2426(,)
+
+# Move caret up one line, extending rectangular selection to new caret position.
+fun void LineUpRectExtend=2427(,)
+
+# Move caret left one character, extending rectangular selection to new caret position.
+fun void CharLeftRectExtend=2428(,)
+
+# Move caret right one character, extending rectangular selection to new caret position.
+fun void CharRightRectExtend=2429(,)
+
+# Move caret to first position on line, extending rectangular selection to new caret position.
+fun void HomeRectExtend=2430(,)
+
+# Move caret to before first visible character on line.
+# If already there move to first character on line.
+# In either case, extend rectangular selection to new caret position.
+fun void VCHomeRectExtend=2431(,)
+
+# Move caret to last position on line, extending rectangular selection to new caret position.
+fun void LineEndRectExtend=2432(,)
+
+# Move caret one page up, extending rectangular selection to new caret position.
+fun void PageUpRectExtend=2433(,)
+
+# Move caret one page down, extending rectangular selection to new caret position.
+fun void PageDownRectExtend=2434(,)
+
+
+# Move caret to top of page, or one page up if already at top of page.
+fun void StutteredPageUp=2435(,)
+
+# Move caret to top of page, or one page up if already at top of page, extending selection to new caret position.
+fun void StutteredPageUpExtend=2436(,)
+
+# Move caret to bottom of page, or one page down if already at bottom of page.
+fun void StutteredPageDown=2437(,)
+
+# Move caret to bottom of page, or one page down if already at bottom of page, extending selection to new caret position.
+fun void StutteredPageDownExtend=2438(,)
+
+
+# Move caret left one word, position cursor at end of word.
+fun void WordLeftEnd=2439(,)
+
+# Move caret left one word, position cursor at end of word, extending selection to new caret position.
+fun void WordLeftEndExtend=2440(,)
+
+# Move caret right one word, position cursor at end of word.
+fun void WordRightEnd=2441(,)
+
+# Move caret right one word, position cursor at end of word, extending selection to new caret position.
+fun void WordRightEndExtend=2442(,)
+
+# Set the set of characters making up whitespace for when moving or selecting by word.
+# Should be called after SetWordChars.
+set void SetWhitespaceChars=2443(, string characters)
+
+# Reset the set of characters for whitespace and word characters to the defaults.
+fun void SetCharsDefault=2444(,)
+
+# Get currently selected item position in the auto-completion list
+fun int AutoCGetCurrent=2445(,)
+
+# Enlarge the document to a particular size of text bytes.
+fun void Allocate=2446(int bytes,)
+
+# Returns the target converted to UTF8.
+# Return the length in bytes.
+fun int TargetAsUTF8=2447(, stringresult s)
+
+# Set the length of the utf8 argument for calling EncodedFromUTF8.
+# Set to -1 and the string will be measured to the first nul.
+fun void SetLengthForEncode=2448(int bytes,)
+
+# Translates a UTF8 string into the document encoding.
+# Return the length of the result in bytes.
+# On error return 0.
+fun int EncodedFromUTF8=2449(string utf8, stringresult encoded)
+
+# Find the position of a column on a line taking into account tabs and
+# multi-byte characters. If beyond end of line, return line end position.
+fun int FindColumn=2456(int line, int column)
+
+# Can the caret preferred x position only be changed by explicit movement commands?
+get bool GetCaretSticky=2457(,)
+
+# Stop the caret preferred x position changing when the user types.
+set void SetCaretSticky=2458(bool useCaretStickyBehaviour,)
+
+# Switch between sticky and non-sticky: meant to be bound to a key.
+fun void ToggleCaretSticky=2459(,)
+
+# Enable/Disable convert-on-paste for line endings
+set void SetPasteConvertEndings=2467(bool convert,)
+
+# Get convert-on-paste setting
+get bool GetPasteConvertEndings=2468(,)
+
+# Duplicate the selection. If selection empty duplicate the line containing the caret.
+fun void SelectionDuplicate=2469(,)
+
# Start notifying the container of all key presses and commands.
fun void StartRecord=3001(,)
# Stop notifying the container of all key presses and commands.
fun void StopRecord=3002(,)
-# Set the lexing language of the document.
+# Set the lexing language of the document.
set void SetLexer=4001(int lexer,)
-# Retrieve the lexing language of the document.
+# Retrieve the lexing language of the document.
get int GetLexer=4002(,)
# Colourise a segment of the document using the current lexing language.
# Set up a value that may be used by a lexer for some optional feature.
set void SetProperty=4004(string key, string value)
+# Maximum value of keywordSet parameter of SetKeyWords.
+val KEYWORDSET_MAX=8
+
# Set up the key words used by the lexer.
set void SetKeyWords=4005(int keywordSet, string keyWords)
+# Set the lexing language of the document based on string name.
+set void SetLexerLanguage=4006(, string language)
+
+# Load a lexer library (dll / so).
+fun void LoadLexerLibrary=4007(, string path)
+
+# Retrieve a "property" value previously set with SetProperty.
+fun int GetProperty=4008(string key, stringresult buf)
+
+# Retrieve a "property" value previously set with SetProperty,
+# with "$()" variable replacement on returned buffer.
+fun int GetPropertyExpanded=4009(string key, stringresult buf)
+
+# Retrieve a "property" value previously set with SetProperty,
+# interpreted as an int AFTER any "$()" variable replacement.
+get int GetPropertyInt=4010(string key,)
+
+# Retrieve the number of bits the current lexer needs for styling.
+get int GetStyleBitsNeeded=4011(,)
+
# Notifications
-# Type of modification and the action which caused the modification
+# Type of modification and the action which caused the modification.
# These are defined as a bit mask to make it easy to specify which notifications are wanted.
# One bit is set from each of SC_MOD_* and SC_PERFORMED_*.
+enu ModificationFlags=SC_MOD_ SC_PERFORMED_ SC_LAST
val SC_MOD_INSERTTEXT=0x1
val SC_MOD_DELETETEXT=0x2
val SC_MOD_CHANGESTYLE=0x4
val SC_PERFORMED_USER=0x10
val SC_PERFORMED_UNDO=0x20
val SC_PERFORMED_REDO=0x40
+val SC_MULTISTEPUNDOREDO=0x80
val SC_LASTSTEPINUNDOREDO=0x100
val SC_MOD_CHANGEMARKER=0x200
val SC_MOD_BEFOREINSERT=0x400
val SC_MOD_BEFOREDELETE=0x800
-val SC_MODEVENTMASKALL=0xF77
+val SC_MULTILINEUNDOREDO=0x1000
+val SC_MODEVENTMASKALL=0x1FFF
# For compatibility, these go through the COMMAND notification rather than NOTIFY
-# and have exactly the same values as the EN_* constants.
+# and should have had exactly the same values as the EN_* constants.
+# Unfortunately the SETFOCUS and KILLFOCUS are flipped over from EN_*
+# As clients depend on these constants, this will not be changed.
val SCEN_CHANGE=768
val SCEN_SETFOCUS=512
val SCEN_KILLFOCUS=256
-# Symbolic key codes and modifier flags
-# ASCII and other printable characters below 256
-# Extended keys above 300
+# Symbolic key codes and modifier flags.
+# ASCII and other printable characters below 256.
+# Extended keys above 300.
+enu Keys=SCK_
val SCK_DOWN=300
val SCK_UP=301
val SCK_LEFT=302
val SCK_SUBTRACT=311
val SCK_DIVIDE=312
+enu KeyMod=SCMOD_
+val SCMOD_NORM=0
val SCMOD_SHIFT=1
val SCMOD_CTRL=2
val SCMOD_ALT=4
################################################
# For SciLexer.h
+enu Lexer=SCLEX_
val SCLEX_CONTAINER=0
val SCLEX_NULL=1
val SCLEX_PYTHON=2
val SCLEX_LATEX=14
val SCLEX_LUA=15
val SCLEX_DIFF=16
+val SCLEX_CONF=17
+val SCLEX_PASCAL=18
+val SCLEX_AVE=19
+val SCLEX_ADA=20
+val SCLEX_LISP=21
+val SCLEX_RUBY=22
+val SCLEX_EIFFEL=23
+val SCLEX_EIFFELKW=24
+val SCLEX_TCL=25
+val SCLEX_NNCRONTAB=26
+val SCLEX_BULLANT=27
+val SCLEX_VBSCRIPT=28
+val SCLEX_BAAN=31
+val SCLEX_MATLAB=32
+val SCLEX_SCRIPTOL=33
+val SCLEX_ASM=34
+val SCLEX_CPPNOCASE=35
+val SCLEX_FORTRAN=36
+val SCLEX_F77=37
+val SCLEX_CSS=38
+val SCLEX_POV=39
+val SCLEX_LOUT=40
+val SCLEX_ESCRIPT=41
+val SCLEX_PS=42
+val SCLEX_NSIS=43
+val SCLEX_MMIXAL=44
+val SCLEX_CLW=45
+val SCLEX_CLWNOCASE=46
+val SCLEX_LOT=47
+val SCLEX_YAML=48
+val SCLEX_TEX=49
+val SCLEX_METAPOST=50
+val SCLEX_POWERBASIC=51
+val SCLEX_FORTH=52
+val SCLEX_ERLANG=53
+val SCLEX_OCTAVE=54
+val SCLEX_MSSQL=55
+val SCLEX_VERILOG=56
+val SCLEX_KIX=57
+val SCLEX_GUI4CLI=58
+val SCLEX_SPECMAN=59
+val SCLEX_AU3=60
+val SCLEX_APDL=61
+val SCLEX_BASH=62
+val SCLEX_ASN1=63
+val SCLEX_VHDL=64
+val SCLEX_CAML=65
+val SCLEX_BLITZBASIC=66
+val SCLEX_PUREBASIC=67
+val SCLEX_HASKELL=68
+val SCLEX_PHPSCRIPT=69
+val SCLEX_TADS3=70
+val SCLEX_REBOL=71
+val SCLEX_SMALLTALK=72
+val SCLEX_FLAGSHIP=73
+val SCLEX_CSOUND=74
+val SCLEX_FREEBASIC=75
+
+# These are deprecated, STC_LEX_HTML should be used instead.
+val SCLEX_ASP=29
+val SCLEX_PHP=30
+
+
+# When a lexer specifies its language as SCLEX_AUTOMATIC it receives a
+# value assigned in sequence from SCLEX_AUTOMATIC+1.
+val SCLEX_AUTOMATIC=1000
# Lexical states for SCLEX_PYTHON
+lex Python=SCLEX_PYTHON SCE_P_
val SCE_P_DEFAULT=0
val SCE_P_COMMENTLINE=1
val SCE_P_NUMBER=2
val SCE_P_IDENTIFIER=11
val SCE_P_COMMENTBLOCK=12
val SCE_P_STRINGEOL=13
-# Lexical states for SCLEX_CPP, SCLEX_VB
+val SCE_P_WORD2=14
+val SCE_P_DECORATOR=15
+# Lexical states for SCLEX_CPP
+lex Cpp=SCLEX_CPP SCE_C_
+lex Pascal=SCLEX_PASCAL SCE_C_
+lex TCL=SCLEX_TCL SCE_C_
+lex BullAnt=SCLEX_BULLANT SCE_C_
val SCE_C_DEFAULT=0
val SCE_C_COMMENT=1
val SCE_C_COMMENTLINE=2
val SCE_C_IDENTIFIER=11
val SCE_C_STRINGEOL=12
val SCE_C_VERBATIM=13
+val SCE_C_REGEX=14
+val SCE_C_COMMENTLINEDOC=15
+val SCE_C_WORD2=16
+val SCE_C_COMMENTDOCKEYWORD=17
+val SCE_C_COMMENTDOCKEYWORDERROR=18
+val SCE_C_GLOBALCLASS=19
# Lexical states for SCLEX_HTML, SCLEX_XML
+lex HTML=SCLEX_HTML SCE_H
+lex XML=SCLEX_XML SCE_H
+lex ASP=SCLEX_ASP SCE_H
+lex PHP=SCLEX_PHP SCE_H
val SCE_H_DEFAULT=0
val SCE_H_TAG=1
val SCE_H_TAGUNKNOWN=2
val SCE_H_QUESTION=18
# More HTML
val SCE_H_VALUE=19
+# X-Code
+val SCE_H_XCCOMMENT=20
+# SGML
+val SCE_H_SGML_DEFAULT=21
+val SCE_H_SGML_COMMAND=22
+val SCE_H_SGML_1ST_PARAM=23
+val SCE_H_SGML_DOUBLESTRING=24
+val SCE_H_SGML_SIMPLESTRING=25
+val SCE_H_SGML_ERROR=26
+val SCE_H_SGML_SPECIAL=27
+val SCE_H_SGML_ENTITY=28
+val SCE_H_SGML_COMMENT=29
+val SCE_H_SGML_1ST_PARAM_COMMENT=30
+val SCE_H_SGML_BLOCK_DEFAULT=31
# Embedded Javascript
val SCE_HJ_START=40
val SCE_HJ_DEFAULT=41
val SCE_HJ_SINGLESTRING=49
val SCE_HJ_SYMBOLS=50
val SCE_HJ_STRINGEOL=51
+val SCE_HJ_REGEX=52
# ASP Javascript
val SCE_HJA_START=55
val SCE_HJA_DEFAULT=56
val SCE_HJA_SINGLESTRING=64
val SCE_HJA_SYMBOLS=65
val SCE_HJA_STRINGEOL=66
+val SCE_HJA_REGEX=67
# Embedded VBScript
val SCE_HB_START=70
val SCE_HB_DEFAULT=71
val SCE_HP_DEFNAME=100
val SCE_HP_OPERATOR=101
val SCE_HP_IDENTIFIER=102
+# PHP
+val SCE_HPHP_COMPLEX_VARIABLE=104
# ASP Python
val SCE_HPA_START=105
val SCE_HPA_DEFAULT=106
val SCE_HPHP_VARIABLE=123
val SCE_HPHP_COMMENT=124
val SCE_HPHP_COMMENTLINE=125
-val SCE_HPHP_STRINGEOL=126
+val SCE_HPHP_HSTRING_VARIABLE=126
+val SCE_HPHP_OPERATOR=127
# Lexical states for SCLEX_PERL
+lex Perl=SCLEX_PERL SCE_PL_
val SCE_PL_DEFAULT=0
-val SCE_PL_HERE=1
+val SCE_PL_ERROR=1
val SCE_PL_COMMENTLINE=2
val SCE_PL_POD=3
val SCE_PL_NUMBER=4
val SCE_PL_ARRAY=13
val SCE_PL_HASH=14
val SCE_PL_SYMBOLTABLE=15
-val SCE_PL_REF=16
+val SCE_PL_VARIABLE_INDEXER=16
val SCE_PL_REGEX=17
val SCE_PL_REGSUBST=18
val SCE_PL_LONGQUOTE=19
val SCE_PL_BACKTICKS=20
val SCE_PL_DATASECTION=21
+val SCE_PL_HERE_DELIM=22
+val SCE_PL_HERE_Q=23
+val SCE_PL_HERE_QQ=24
+val SCE_PL_HERE_QX=25
+val SCE_PL_STRING_Q=26
+val SCE_PL_STRING_QQ=27
+val SCE_PL_STRING_QX=28
+val SCE_PL_STRING_QR=29
+val SCE_PL_STRING_QW=30
+val SCE_PL_POD_VERB=31
+# Lexical states for SCLEX_RUBY
+lex Ruby=SCLEX_RUBY SCE_RB_
+val SCE_RB_DEFAULT=0
+val SCE_RB_ERROR=1
+val SCE_RB_COMMENTLINE=2
+val SCE_RB_POD=3
+val SCE_RB_NUMBER=4
+val SCE_RB_WORD=5
+val SCE_RB_STRING=6
+val SCE_RB_CHARACTER=7
+val SCE_RB_CLASSNAME=8
+val SCE_RB_DEFNAME=9
+val SCE_RB_OPERATOR=10
+val SCE_RB_IDENTIFIER=11
+val SCE_RB_REGEX=12
+val SCE_RB_GLOBAL=13
+val SCE_RB_SYMBOL=14
+val SCE_RB_MODULE_NAME=15
+val SCE_RB_INSTANCE_VAR=16
+val SCE_RB_CLASS_VAR=17
+val SCE_RB_BACKTICKS=18
+val SCE_RB_DATASECTION=19
+val SCE_RB_HERE_DELIM=20
+val SCE_RB_HERE_Q=21
+val SCE_RB_HERE_QQ=22
+val SCE_RB_HERE_QX=23
+val SCE_RB_STRING_Q=24
+val SCE_RB_STRING_QQ=25
+val SCE_RB_STRING_QX=26
+val SCE_RB_STRING_QR=27
+val SCE_RB_STRING_QW=28
+val SCE_RB_WORD_DEMOTED=29
+val SCE_RB_STDIN=30
+val SCE_RB_STDOUT=31
+val SCE_RB_STDERR=40
+val SCE_RB_UPPER_BOUND=41
+# Lexical states for SCLEX_VB, SCLEX_VBSCRIPT, SCLEX_POWERBASIC
+lex VB=SCLEX_VB SCE_B_
+lex VBScript=SCLEX_VBSCRIPT SCE_B_
+lex PowerBasic=SCLEX_POWERBASIC SCE_B_
+val SCE_B_DEFAULT=0
+val SCE_B_COMMENT=1
+val SCE_B_NUMBER=2
+val SCE_B_KEYWORD=3
+val SCE_B_STRING=4
+val SCE_B_PREPROCESSOR=5
+val SCE_B_OPERATOR=6
+val SCE_B_IDENTIFIER=7
+val SCE_B_DATE=8
+val SCE_B_STRINGEOL=9
+val SCE_B_KEYWORD2=10
+val SCE_B_KEYWORD3=11
+val SCE_B_KEYWORD4=12
+val SCE_B_CONSTANT=13
+val SCE_B_ASM=14
+val SCE_B_LABEL=15
+val SCE_B_ERROR=16
+val SCE_B_HEXNUMBER=17
+val SCE_B_BINNUMBER=18
+# Lexical states for SCLEX_PROPERTIES
+lex Properties=SCLEX_PROPERTIES SCE_PROPS_
+val SCE_PROPS_DEFAULT=0
+val SCE_PROPS_COMMENT=1
+val SCE_PROPS_SECTION=2
+val SCE_PROPS_ASSIGNMENT=3
+val SCE_PROPS_DEFVAL=4
# Lexical states for SCLEX_LATEX
+lex LaTeX=SCLEX_LATEX SCE_L_
val SCE_L_DEFAULT=0
val SCE_L_COMMAND=1
val SCE_L_TAG=2
val SCE_L_MATH=3
val SCE_L_COMMENT=4
# Lexical states for SCLEX_LUA
+lex Lua=SCLEX_LUA SCE_LUA_
val SCE_LUA_DEFAULT=0
val SCE_LUA_COMMENT=1
val SCE_LUA_COMMENTLINE=2
val SCE_LUA_OPERATOR=10
val SCE_LUA_IDENTIFIER=11
val SCE_LUA_STRINGEOL=12
+val SCE_LUA_WORD2=13
+val SCE_LUA_WORD3=14
+val SCE_LUA_WORD4=15
+val SCE_LUA_WORD5=16
+val SCE_LUA_WORD6=17
+val SCE_LUA_WORD7=18
+val SCE_LUA_WORD8=19
+# Lexical states for SCLEX_ERRORLIST
+lex ErrorList=SCLEX_ERRORLIST SCE_ERR_
val SCE_ERR_DEFAULT=0
val SCE_ERR_PYTHON=1
val SCE_ERR_GCC=2
val SCE_ERR_CMD=4
val SCE_ERR_BORLAND=5
val SCE_ERR_PERL=6
+val SCE_ERR_NET=7
+val SCE_ERR_LUA=8
+val SCE_ERR_CTAG=9
+val SCE_ERR_DIFF_CHANGED=10
+val SCE_ERR_DIFF_ADDITION=11
+val SCE_ERR_DIFF_DELETION=12
+val SCE_ERR_DIFF_MESSAGE=13
+val SCE_ERR_PHP=14
+val SCE_ERR_ELF=15
+val SCE_ERR_IFC=16
+val SCE_ERR_IFORT=17
+val SCE_ERR_ABSF=18
+val SCE_ERR_TIDY=19
+val SCE_ERR_JAVA_STACK=20
+# Lexical states for SCLEX_BATCH
+lex Batch=SCLEX_BATCH SCE_BAT_
+val SCE_BAT_DEFAULT=0
+val SCE_BAT_COMMENT=1
+val SCE_BAT_WORD=2
+val SCE_BAT_LABEL=3
+val SCE_BAT_HIDE=4
+val SCE_BAT_COMMAND=5
+val SCE_BAT_IDENTIFIER=6
+val SCE_BAT_OPERATOR=7
+# Lexical states for SCLEX_MAKEFILE
+lex MakeFile=SCLEX_MAKEFILE SCE_MAKE_
+val SCE_MAKE_DEFAULT=0
+val SCE_MAKE_COMMENT=1
+val SCE_MAKE_PREPROCESSOR=2
+val SCE_MAKE_IDENTIFIER=3
+val SCE_MAKE_OPERATOR=4
+val SCE_MAKE_TARGET=5
+val SCE_MAKE_IDEOL=9
+# Lexical states for SCLEX_DIFF
+lex Diff=SCLEX_DIFF SCE_DIFF_
+val SCE_DIFF_DEFAULT=0
+val SCE_DIFF_COMMENT=1
+val SCE_DIFF_COMMAND=2
+val SCE_DIFF_HEADER=3
+val SCE_DIFF_POSITION=4
+val SCE_DIFF_DELETED=5
+val SCE_DIFF_ADDED=6
+# Lexical states for SCLEX_CONF (Apache Configuration Files Lexer)
+lex Conf=SCLEX_CONF SCE_CONF_
+val SCE_CONF_DEFAULT=0
+val SCE_CONF_COMMENT=1
+val SCE_CONF_NUMBER=2
+val SCE_CONF_IDENTIFIER=3
+val SCE_CONF_EXTENSION=4
+val SCE_CONF_PARAMETER=5
+val SCE_CONF_STRING=6
+val SCE_CONF_OPERATOR=7
+val SCE_CONF_IP=8
+val SCE_CONF_DIRECTIVE=9
+# Lexical states for SCLEX_AVE, Avenue
+lex Avenue=SCLEX_AVE SCE_AVE_
+val SCE_AVE_DEFAULT=0
+val SCE_AVE_COMMENT=1
+val SCE_AVE_NUMBER=2
+val SCE_AVE_WORD=3
+val SCE_AVE_STRING=6
+val SCE_AVE_ENUM=7
+val SCE_AVE_STRINGEOL=8
+val SCE_AVE_IDENTIFIER=9
+val SCE_AVE_OPERATOR=10
+val SCE_AVE_WORD1=11
+val SCE_AVE_WORD2=12
+val SCE_AVE_WORD3=13
+val SCE_AVE_WORD4=14
+val SCE_AVE_WORD5=15
+val SCE_AVE_WORD6=16
+# Lexical states for SCLEX_ADA
+lex Ada=SCLEX_ADA SCE_ADA_
+val SCE_ADA_DEFAULT=0
+val SCE_ADA_WORD=1
+val SCE_ADA_IDENTIFIER=2
+val SCE_ADA_NUMBER=3
+val SCE_ADA_DELIMITER=4
+val SCE_ADA_CHARACTER=5
+val SCE_ADA_CHARACTEREOL=6
+val SCE_ADA_STRING=7
+val SCE_ADA_STRINGEOL=8
+val SCE_ADA_LABEL=9
+val SCE_ADA_COMMENTLINE=10
+val SCE_ADA_ILLEGAL=11
+# Lexical states for SCLEX_BAAN
+lex Baan=SCLEX_BAAN SCE_BAAN_
+val SCE_BAAN_DEFAULT=0
+val SCE_BAAN_COMMENT=1
+val SCE_BAAN_COMMENTDOC=2
+val SCE_BAAN_NUMBER=3
+val SCE_BAAN_WORD=4
+val SCE_BAAN_STRING=5
+val SCE_BAAN_PREPROCESSOR=6
+val SCE_BAAN_OPERATOR=7
+val SCE_BAAN_IDENTIFIER=8
+val SCE_BAAN_STRINGEOL=9
+val SCE_BAAN_WORD2=10
+# Lexical states for SCLEX_LISP
+lex Lisp=SCLEX_LISP SCE_LISP_
+val SCE_LISP_DEFAULT=0
+val SCE_LISP_COMMENT=1
+val SCE_LISP_NUMBER=2
+val SCE_LISP_KEYWORD=3
+val SCE_LISP_KEYWORD_KW=4
+val SCE_LISP_SYMBOL=5
+val SCE_LISP_STRING=6
+val SCE_LISP_STRINGEOL=8
+val SCE_LISP_IDENTIFIER=9
+val SCE_LISP_OPERATOR=10
+val SCE_LISP_SPECIAL=11
+val SCE_LISP_MULTI_COMMENT=12
+# Lexical states for SCLEX_EIFFEL and SCLEX_EIFFELKW
+lex Eiffel=SCLEX_EIFFEL SCE_EIFFEL_
+lex EiffelKW=SCLEX_EIFFELKW SCE_EIFFEL_
+val SCE_EIFFEL_DEFAULT=0
+val SCE_EIFFEL_COMMENTLINE=1
+val SCE_EIFFEL_NUMBER=2
+val SCE_EIFFEL_WORD=3
+val SCE_EIFFEL_STRING=4
+val SCE_EIFFEL_CHARACTER=5
+val SCE_EIFFEL_OPERATOR=6
+val SCE_EIFFEL_IDENTIFIER=7
+val SCE_EIFFEL_STRINGEOL=8
+# Lexical states for SCLEX_NNCRONTAB (nnCron crontab Lexer)
+lex NNCronTab=SCLEX_NNCRONTAB SCE_NNCRONTAB_
+val SCE_NNCRONTAB_DEFAULT=0
+val SCE_NNCRONTAB_COMMENT=1
+val SCE_NNCRONTAB_TASK=2
+val SCE_NNCRONTAB_SECTION=3
+val SCE_NNCRONTAB_KEYWORD=4
+val SCE_NNCRONTAB_MODIFIER=5
+val SCE_NNCRONTAB_ASTERISK=6
+val SCE_NNCRONTAB_NUMBER=7
+val SCE_NNCRONTAB_STRING=8
+val SCE_NNCRONTAB_ENVIRONMENT=9
+val SCE_NNCRONTAB_IDENTIFIER=10
+# Lexical states for SCLEX_FORTH (Forth Lexer)
+lex Forth=SCLEX_FORTH SCE_FORTH_
+val SCE_FORTH_DEFAULT=0
+val SCE_FORTH_COMMENT=1
+val SCE_FORTH_COMMENT_ML=2
+val SCE_FORTH_IDENTIFIER=3
+val SCE_FORTH_CONTROL=4
+val SCE_FORTH_KEYWORD=5
+val SCE_FORTH_DEFWORD=6
+val SCE_FORTH_PREWORD1=7
+val SCE_FORTH_PREWORD2=8
+val SCE_FORTH_NUMBER=9
+val SCE_FORTH_STRING=10
+val SCE_FORTH_LOCALE=11
+# Lexical states for SCLEX_MATLAB
+lex MatLab=SCLEX_MATLAB SCE_MATLAB_
+val SCE_MATLAB_DEFAULT=0
+val SCE_MATLAB_COMMENT=1
+val SCE_MATLAB_COMMAND=2
+val SCE_MATLAB_NUMBER=3
+val SCE_MATLAB_KEYWORD=4
+# single quoted string
+val SCE_MATLAB_STRING=5
+val SCE_MATLAB_OPERATOR=6
+val SCE_MATLAB_IDENTIFIER=7
+val SCE_MATLAB_DOUBLEQUOTESTRING=8
+# Lexical states for SCLEX_SCRIPTOL
+lex Sol=SCLEX_SCRIPTOL SCE_SCRIPTOL_
+val SCE_SCRIPTOL_DEFAULT=0
+val SCE_SCRIPTOL_WHITE=1
+val SCE_SCRIPTOL_COMMENTLINE=2
+val SCE_SCRIPTOL_PERSISTENT=3
+val SCE_SCRIPTOL_CSTYLE=4
+val SCE_SCRIPTOL_COMMENTBLOCK=5
+val SCE_SCRIPTOL_NUMBER=6
+val SCE_SCRIPTOL_STRING=7
+val SCE_SCRIPTOL_CHARACTER=8
+val SCE_SCRIPTOL_STRINGEOL=9
+val SCE_SCRIPTOL_KEYWORD=10
+val SCE_SCRIPTOL_OPERATOR=11
+val SCE_SCRIPTOL_IDENTIFIER=12
+val SCE_SCRIPTOL_TRIPLE=13
+val SCE_SCRIPTOL_CLASSNAME=14
+val SCE_SCRIPTOL_PREPROCESSOR=15
+# Lexical states for SCLEX_ASM
+lex Asm=SCLEX_ASM SCE_ASM_
+val SCE_ASM_DEFAULT=0
+val SCE_ASM_COMMENT=1
+val SCE_ASM_NUMBER=2
+val SCE_ASM_STRING=3
+val SCE_ASM_OPERATOR=4
+val SCE_ASM_IDENTIFIER=5
+val SCE_ASM_CPUINSTRUCTION=6
+val SCE_ASM_MATHINSTRUCTION=7
+val SCE_ASM_REGISTER=8
+val SCE_ASM_DIRECTIVE=9
+val SCE_ASM_DIRECTIVEOPERAND=10
+val SCE_ASM_COMMENTBLOCK=11
+val SCE_ASM_CHARACTER=12
+val SCE_ASM_STRINGEOL=13
+val SCE_ASM_EXTINSTRUCTION=14
+# Lexical states for SCLEX_FORTRAN
+lex Fortran=SCLEX_FORTRAN SCE_F_
+lex F77=SCLEX_F77 SCE_F_
+val SCE_F_DEFAULT=0
+val SCE_F_COMMENT=1
+val SCE_F_NUMBER=2
+val SCE_F_STRING1=3
+val SCE_F_STRING2=4
+val SCE_F_STRINGEOL=5
+val SCE_F_OPERATOR=6
+val SCE_F_IDENTIFIER=7
+val SCE_F_WORD=8
+val SCE_F_WORD2=9
+val SCE_F_WORD3=10
+val SCE_F_PREPROCESSOR=11
+val SCE_F_OPERATOR2=12
+val SCE_F_LABEL=13
+val SCE_F_CONTINUATION=14
+# Lexical states for SCLEX_CSS
+lex CSS=SCLEX_CSS SCE_CSS_
+val SCE_CSS_DEFAULT=0
+val SCE_CSS_TAG=1
+val SCE_CSS_CLASS=2
+val SCE_CSS_PSEUDOCLASS=3
+val SCE_CSS_UNKNOWN_PSEUDOCLASS=4
+val SCE_CSS_OPERATOR=5
+val SCE_CSS_IDENTIFIER=6
+val SCE_CSS_UNKNOWN_IDENTIFIER=7
+val SCE_CSS_VALUE=8
+val SCE_CSS_COMMENT=9
+val SCE_CSS_ID=10
+val SCE_CSS_IMPORTANT=11
+val SCE_CSS_DIRECTIVE=12
+val SCE_CSS_DOUBLESTRING=13
+val SCE_CSS_SINGLESTRING=14
+val SCE_CSS_IDENTIFIER2=15
+val SCE_CSS_ATTRIBUTE=16
+# Lexical states for SCLEX_POV
+lex POV=SCLEX_POV SCE_POV_
+val SCE_POV_DEFAULT=0
+val SCE_POV_COMMENT=1
+val SCE_POV_COMMENTLINE=2
+val SCE_POV_NUMBER=3
+val SCE_POV_OPERATOR=4
+val SCE_POV_IDENTIFIER=5
+val SCE_POV_STRING=6
+val SCE_POV_STRINGEOL=7
+val SCE_POV_DIRECTIVE=8
+val SCE_POV_BADDIRECTIVE=9
+val SCE_POV_WORD2=10
+val SCE_POV_WORD3=11
+val SCE_POV_WORD4=12
+val SCE_POV_WORD5=13
+val SCE_POV_WORD6=14
+val SCE_POV_WORD7=15
+val SCE_POV_WORD8=16
+# Lexical states for SCLEX_LOUT
+lex LOUT=SCLEX_LOUT SCE_LOUT_
+val SCE_LOUT_DEFAULT=0
+val SCE_LOUT_COMMENT=1
+val SCE_LOUT_NUMBER=2
+val SCE_LOUT_WORD=3
+val SCE_LOUT_WORD2=4
+val SCE_LOUT_WORD3=5
+val SCE_LOUT_WORD4=6
+val SCE_LOUT_STRING=7
+val SCE_LOUT_OPERATOR=8
+val SCE_LOUT_IDENTIFIER=9
+val SCE_LOUT_STRINGEOL=10
+# Lexical states for SCLEX_ESCRIPT
+lex ESCRIPT=SCLEX_ESCRIPT SCE_ESCRIPT_
+val SCE_ESCRIPT_DEFAULT=0
+val SCE_ESCRIPT_COMMENT=1
+val SCE_ESCRIPT_COMMENTLINE=2
+val SCE_ESCRIPT_COMMENTDOC=3
+val SCE_ESCRIPT_NUMBER=4
+val SCE_ESCRIPT_WORD=5
+val SCE_ESCRIPT_STRING=6
+val SCE_ESCRIPT_OPERATOR=7
+val SCE_ESCRIPT_IDENTIFIER=8
+val SCE_ESCRIPT_BRACE=9
+val SCE_ESCRIPT_WORD2=10
+val SCE_ESCRIPT_WORD3=11
+# Lexical states for SCLEX_PS
+lex PS=SCLEX_PS SCE_PS_
+val SCE_PS_DEFAULT=0
+val SCE_PS_COMMENT=1
+val SCE_PS_DSC_COMMENT=2
+val SCE_PS_DSC_VALUE=3
+val SCE_PS_NUMBER=4
+val SCE_PS_NAME=5
+val SCE_PS_KEYWORD=6
+val SCE_PS_LITERAL=7
+val SCE_PS_IMMEVAL=8
+val SCE_PS_PAREN_ARRAY=9
+val SCE_PS_PAREN_DICT=10
+val SCE_PS_PAREN_PROC=11
+val SCE_PS_TEXT=12
+val SCE_PS_HEXSTRING=13
+val SCE_PS_BASE85STRING=14
+val SCE_PS_BADSTRINGCHAR=15
+# Lexical states for SCLEX_NSIS
+lex NSIS=SCLEX_NSIS SCE_NSIS_
+val SCE_NSIS_DEFAULT=0
+val SCE_NSIS_COMMENT=1
+val SCE_NSIS_STRINGDQ=2
+val SCE_NSIS_STRINGLQ=3
+val SCE_NSIS_STRINGRQ=4
+val SCE_NSIS_FUNCTION=5
+val SCE_NSIS_VARIABLE=6
+val SCE_NSIS_LABEL=7
+val SCE_NSIS_USERDEFINED=8
+val SCE_NSIS_SECTIONDEF=9
+val SCE_NSIS_SUBSECTIONDEF=10
+val SCE_NSIS_IFDEFINEDEF=11
+val SCE_NSIS_MACRODEF=12
+val SCE_NSIS_STRINGVAR=13
+val SCE_NSIS_NUMBER=14
+val SCE_NSIS_SECTIONGROUP=15
+val SCE_NSIS_PAGEEX=16
+val SCE_NSIS_FUNCTIONDEF=17
+val SCE_NSIS_COMMENTBOX=18
+# Lexical states for SCLEX_MMIXAL
+lex MMIXAL=SCLEX_MMIXAL SCE_MMIXAL_
+val SCE_MMIXAL_LEADWS=0
+val SCE_MMIXAL_COMMENT=1
+val SCE_MMIXAL_LABEL=2
+val SCE_MMIXAL_OPCODE=3
+val SCE_MMIXAL_OPCODE_PRE=4
+val SCE_MMIXAL_OPCODE_VALID=5
+val SCE_MMIXAL_OPCODE_UNKNOWN=6
+val SCE_MMIXAL_OPCODE_POST=7
+val SCE_MMIXAL_OPERANDS=8
+val SCE_MMIXAL_NUMBER=9
+val SCE_MMIXAL_REF=10
+val SCE_MMIXAL_CHAR=11
+val SCE_MMIXAL_STRING=12
+val SCE_MMIXAL_REGISTER=13
+val SCE_MMIXAL_HEX=14
+val SCE_MMIXAL_OPERATOR=15
+val SCE_MMIXAL_SYMBOL=16
+val SCE_MMIXAL_INCLUDE=17
+# Lexical states for SCLEX_CLW
+lex Clarion=SCLEX_CLW SCE_CLW_
+val SCE_CLW_DEFAULT=0
+val SCE_CLW_LABEL=1
+val SCE_CLW_COMMENT=2
+val SCE_CLW_STRING=3
+val SCE_CLW_USER_IDENTIFIER=4
+val SCE_CLW_INTEGER_CONSTANT=5
+val SCE_CLW_REAL_CONSTANT=6
+val SCE_CLW_PICTURE_STRING=7
+val SCE_CLW_KEYWORD=8
+val SCE_CLW_COMPILER_DIRECTIVE=9
+val SCE_CLW_RUNTIME_EXPRESSIONS=10
+val SCE_CLW_BUILTIN_PROCEDURES_FUNCTION=11
+val SCE_CLW_STRUCTURE_DATA_TYPE=12
+val SCE_CLW_ATTRIBUTE=13
+val SCE_CLW_STANDARD_EQUATE=14
+val SCE_CLW_ERROR=15
+val SCE_CLW_DEPRECATED=16
+# Lexical states for SCLEX_LOT
+lex LOT=SCLEX_LOT SCE_LOT_
+val SCE_LOT_DEFAULT=0
+val SCE_LOT_HEADER=1
+val SCE_LOT_BREAK=2
+val SCE_LOT_SET=3
+val SCE_LOT_PASS=4
+val SCE_LOT_FAIL=5
+val SCE_LOT_ABORT=6
+# Lexical states for SCLEX_YAML
+lex YAML=SCLEX_YAML SCE_YAML_
+val SCE_YAML_DEFAULT=0
+val SCE_YAML_COMMENT=1
+val SCE_YAML_IDENTIFIER=2
+val SCE_YAML_KEYWORD=3
+val SCE_YAML_NUMBER=4
+val SCE_YAML_REFERENCE=5
+val SCE_YAML_DOCUMENT=6
+val SCE_YAML_TEXT=7
+val SCE_YAML_ERROR=8
+# Lexical states for SCLEX_TEX
+lex TeX=SCLEX_TEX SCE_TEX_
+val SCE_TEX_DEFAULT=0
+val SCE_TEX_SPECIAL=1
+val SCE_TEX_GROUP=2
+val SCE_TEX_SYMBOL=3
+val SCE_TEX_COMMAND=4
+val SCE_TEX_TEXT=5
+lex Metapost=SCLEX_METAPOST SCE_METAPOST_
+val SCE_METAPOST_DEFAULT=0
+val SCE_METAPOST_SPECIAL=1
+val SCE_METAPOST_GROUP=2
+val SCE_METAPOST_SYMBOL=3
+val SCE_METAPOST_COMMAND=4
+val SCE_METAPOST_TEXT=5
+val SCE_METAPOST_EXTRA=6
+# Lexical states for SCLEX_ERLANG
+lex Erlang=SCLEX_ERLANG SCE_ERLANG_
+val SCE_ERLANG_DEFAULT=0
+val SCE_ERLANG_COMMENT=1
+val SCE_ERLANG_VARIABLE=2
+val SCE_ERLANG_NUMBER=3
+val SCE_ERLANG_KEYWORD=4
+val SCE_ERLANG_STRING=5
+val SCE_ERLANG_OPERATOR=6
+val SCE_ERLANG_ATOM=7
+val SCE_ERLANG_FUNCTION_NAME=8
+val SCE_ERLANG_CHARACTER=9
+val SCE_ERLANG_MACRO=10
+val SCE_ERLANG_RECORD=11
+val SCE_ERLANG_SEPARATOR=12
+val SCE_ERLANG_NODE_NAME=13
+val SCE_ERLANG_UNKNOWN=31
+# Lexical states for SCLEX_OCTAVE are identical to MatLab
+lex Octave=SCLEX_OCTAVE SCE_MATLAB_
+# Lexical states for SCLEX_MSSQL
+lex MSSQL=SCLEX_MSSQL SCE_MSSQL_
+val SCE_MSSQL_DEFAULT=0
+val SCE_MSSQL_COMMENT=1
+val SCE_MSSQL_LINE_COMMENT=2
+val SCE_MSSQL_NUMBER=3
+val SCE_MSSQL_STRING=4
+val SCE_MSSQL_OPERATOR=5
+val SCE_MSSQL_IDENTIFIER=6
+val SCE_MSSQL_VARIABLE=7
+val SCE_MSSQL_COLUMN_NAME=8
+val SCE_MSSQL_STATEMENT=9
+val SCE_MSSQL_DATATYPE=10
+val SCE_MSSQL_SYSTABLE=11
+val SCE_MSSQL_GLOBAL_VARIABLE=12
+val SCE_MSSQL_FUNCTION=13
+val SCE_MSSQL_STORED_PROCEDURE=14
+val SCE_MSSQL_DEFAULT_PREF_DATATYPE=15
+val SCE_MSSQL_COLUMN_NAME_2=16
+# Lexical states for SCLEX_VERILOG
+lex Verilog=SCLEX_VERILOG SCE_V_
+val SCE_V_DEFAULT=0
+val SCE_V_COMMENT=1
+val SCE_V_COMMENTLINE=2
+val SCE_V_COMMENTLINEBANG=3
+val SCE_V_NUMBER=4
+val SCE_V_WORD=5
+val SCE_V_STRING=6
+val SCE_V_WORD2=7
+val SCE_V_WORD3=8
+val SCE_V_PREPROCESSOR=9
+val SCE_V_OPERATOR=10
+val SCE_V_IDENTIFIER=11
+val SCE_V_STRINGEOL=12
+val SCE_V_USER=19
+# Lexical states for SCLEX_KIX
+lex Kix=SCLEX_KIX SCE_KIX_
+val SCE_KIX_DEFAULT=0
+val SCE_KIX_COMMENT=1
+val SCE_KIX_STRING1=2
+val SCE_KIX_STRING2=3
+val SCE_KIX_NUMBER=4
+val SCE_KIX_VAR=5
+val SCE_KIX_MACRO=6
+val SCE_KIX_KEYWORD=7
+val SCE_KIX_FUNCTIONS=8
+val SCE_KIX_OPERATOR=9
+val SCE_KIX_IDENTIFIER=31
+# Lexical states for SCLEX_GUI4CLI
+val SCE_GC_DEFAULT=0
+val SCE_GC_COMMENTLINE=1
+val SCE_GC_COMMENTBLOCK=2
+val SCE_GC_GLOBAL=3
+val SCE_GC_EVENT=4
+val SCE_GC_ATTRIBUTE=5
+val SCE_GC_CONTROL=6
+val SCE_GC_COMMAND=7
+val SCE_GC_STRING=8
+val SCE_GC_OPERATOR=9
+# Lexical states for SCLEX_SPECMAN
+lex Specman=SCLEX_SPECMAN SCE_SN_
+val SCE_SN_DEFAULT=0
+val SCE_SN_CODE=1
+val SCE_SN_COMMENTLINE=2
+val SCE_SN_COMMENTLINEBANG=3
+val SCE_SN_NUMBER=4
+val SCE_SN_WORD=5
+val SCE_SN_STRING=6
+val SCE_SN_WORD2=7
+val SCE_SN_WORD3=8
+val SCE_SN_PREPROCESSOR=9
+val SCE_SN_OPERATOR=10
+val SCE_SN_IDENTIFIER=11
+val SCE_SN_STRINGEOL=12
+val SCE_SN_REGEXTAG=13
+val SCE_SN_SIGNAL=14
+val SCE_SN_USER=19
+# Lexical states for SCLEX_AU3
+lex Au3=SCLEX_AU3 SCE_AU3_
+val SCE_AU3_DEFAULT=0
+val SCE_AU3_COMMENT=1
+val SCE_AU3_COMMENTBLOCK=2
+val SCE_AU3_NUMBER=3
+val SCE_AU3_FUNCTION=4
+val SCE_AU3_KEYWORD=5
+val SCE_AU3_MACRO=6
+val SCE_AU3_STRING=7
+val SCE_AU3_OPERATOR=8
+val SCE_AU3_VARIABLE=9
+val SCE_AU3_SENT=10
+val SCE_AU3_PREPROCESSOR=11
+val SCE_AU3_SPECIAL=12
+val SCE_AU3_EXPAND=13
+val SCE_AU3_COMOBJ=14
+# Lexical states for SCLEX_APDL
+lex APDL=SCLEX_APDL SCE_APDL_
+val SCE_APDL_DEFAULT=0
+val SCE_APDL_COMMENT=1
+val SCE_APDL_COMMENTBLOCK=2
+val SCE_APDL_NUMBER=3
+val SCE_APDL_STRING=4
+val SCE_APDL_OPERATOR=5
+val SCE_APDL_WORD=6
+val SCE_APDL_PROCESSOR=7
+val SCE_APDL_COMMAND=8
+val SCE_APDL_SLASHCOMMAND=9
+val SCE_APDL_STARCOMMAND=10
+val SCE_APDL_ARGUMENT=11
+val SCE_APDL_FUNCTION=12
+# Lexical states for SCLEX_BASH
+lex Bash=SCLEX_BASH SCE_SH_
+val SCE_SH_DEFAULT=0
+val SCE_SH_ERROR=1
+val SCE_SH_COMMENTLINE=2
+val SCE_SH_NUMBER=3
+val SCE_SH_WORD=4
+val SCE_SH_STRING=5
+val SCE_SH_CHARACTER=6
+val SCE_SH_OPERATOR=7
+val SCE_SH_IDENTIFIER=8
+val SCE_SH_SCALAR=9
+val SCE_SH_PARAM=10
+val SCE_SH_BACKTICKS=11
+val SCE_SH_HERE_DELIM=12
+val SCE_SH_HERE_Q=13
+# Lexical states for SCLEX_ASN1
+lex Asn1=SCLEX_ASN1 SCE_ASN1_
+val SCE_ASN1_DEFAULT=0
+val SCE_ASN1_COMMENT=1
+val SCE_ASN1_IDENTIFIER=2
+val SCE_ASN1_STRING=3
+val SCE_ASN1_OID=4
+val SCE_ASN1_SCALAR=5
+val SCE_ASN1_KEYWORD=6
+val SCE_ASN1_ATTRIBUTE=7
+val SCE_ASN1_DESCRIPTOR=8
+val SCE_ASN1_TYPE=9
+val SCE_ASN1_OPERATOR=10
+# Lexical states for SCLEX_VHDL
+lex VHDL=SCLEX_VHDL SCE_VHDL_
+val SCE_VHDL_DEFAULT=0
+val SCE_VHDL_COMMENT=1
+val SCE_VHDL_COMMENTLINEBANG=2
+val SCE_VHDL_NUMBER=3
+val SCE_VHDL_STRING=4
+val SCE_VHDL_OPERATOR=5
+val SCE_VHDL_IDENTIFIER=6
+val SCE_VHDL_STRINGEOL=7
+val SCE_VHDL_KEYWORD=8
+val SCE_VHDL_STDOPERATOR=9
+val SCE_VHDL_ATTRIBUTE=10
+val SCE_VHDL_STDFUNCTION=11
+val SCE_VHDL_STDPACKAGE=12
+val SCE_VHDL_STDTYPE=13
+val SCE_VHDL_USERWORD=14
+# Lexical states for SCLEX_CAML
+lex Caml=SCLEX_CAML SCE_CAML_
+val SCE_CAML_DEFAULT=0
+val SCE_CAML_IDENTIFIER=1
+val SCE_CAML_TAGNAME=2
+val SCE_CAML_KEYWORD=3
+val SCE_CAML_KEYWORD2=4
+val SCE_CAML_KEYWORD3=5
+val SCE_CAML_LINENUM=6
+val SCE_CAML_OPERATOR=7
+val SCE_CAML_NUMBER=8
+val SCE_CAML_CHAR=9
+val SCE_CAML_STRING=11
+val SCE_CAML_COMMENT=12
+val SCE_CAML_COMMENT1=13
+val SCE_CAML_COMMENT2=14
+val SCE_CAML_COMMENT3=15
+# Lexical states for SCLEX_HASKELL
+lex Haskell=SCLEX_HASKELL SCE_HA_
+val SCE_HA_DEFAULT=0
+val SCE_HA_IDENTIFIER=1
+val SCE_HA_KEYWORD=2
+val SCE_HA_NUMBER=3
+val SCE_HA_STRING=4
+val SCE_HA_CHARACTER=5
+val SCE_HA_CLASS=6
+val SCE_HA_MODULE=7
+val SCE_HA_CAPITAL=8
+val SCE_HA_DATA=9
+val SCE_HA_IMPORT=10
+val SCE_HA_OPERATOR=11
+val SCE_HA_INSTANCE=12
+val SCE_HA_COMMENTLINE=13
+val SCE_HA_COMMENTBLOCK=14
+val SCE_HA_COMMENTBLOCK2=15
+val SCE_HA_COMMENTBLOCK3=16
+# Lexical states of SCLEX_TADS3
+lex TADS3=SCLEX_TADS3 SCE_T3_
+val SCE_T3_DEFAULT=0
+val SCE_T3_X_DEFAULT=1
+val SCE_T3_PREPROCESSOR=2
+val SCE_T3_BLOCK_COMMENT=3
+val SCE_T3_LINE_COMMENT=4
+val SCE_T3_OPERATOR=5
+val SCE_T3_KEYWORD=6
+val SCE_T3_NUMBER=7
+val SCE_T3_IDENTIFIER=8
+val SCE_T3_S_STRING=9
+val SCE_T3_D_STRING=10
+val SCE_T3_X_STRING=11
+val SCE_T3_LIB_DIRECTIVE=12
+val SCE_T3_MSG_PARAM=13
+val SCE_T3_HTML_TAG=14
+val SCE_T3_HTML_DEFAULT=15
+val SCE_T3_HTML_STRING=16
+val SCE_T3_USER1=17
+val SCE_T3_USER2=18
+val SCE_T3_USER3=19
+# Lexical states for SCLEX_REBOL
+lex Rebol=SCLEX_REBOL SCE_REBOL_
+val SCE_REBOL_DEFAULT=0
+val SCE_REBOL_COMMENTLINE=1
+val SCE_REBOL_COMMENTBLOCK=2
+val SCE_REBOL_PREFACE=3
+val SCE_REBOL_OPERATOR=4
+val SCE_REBOL_CHARACTER=5
+val SCE_REBOL_QUOTEDSTRING=6
+val SCE_REBOL_BRACEDSTRING=7
+val SCE_REBOL_NUMBER=8
+val SCE_REBOL_PAIR=9
+val SCE_REBOL_TUPLE=10
+val SCE_REBOL_BINARY=11
+val SCE_REBOL_MONEY=12
+val SCE_REBOL_ISSUE=13
+val SCE_REBOL_TAG=14
+val SCE_REBOL_FILE=15
+val SCE_REBOL_EMAIL=16
+val SCE_REBOL_URL=17
+val SCE_REBOL_DATE=18
+val SCE_REBOL_TIME=19
+val SCE_REBOL_IDENTIFIER=20
+val SCE_REBOL_WORD=21
+val SCE_REBOL_WORD2=22
+val SCE_REBOL_WORD3=23
+val SCE_REBOL_WORD4=24
+val SCE_REBOL_WORD5=25
+val SCE_REBOL_WORD6=26
+val SCE_REBOL_WORD7=27
+val SCE_REBOL_WORD8=28
+# Lexical states for SCLEX_SQL
+lex SQL=SCLEX_SQL SCE_SQL_
+val SCE_SQL_DEFAULT=0
+val SCE_SQL_COMMENT=1
+val SCE_SQL_COMMENTLINE=2
+val SCE_SQL_COMMENTDOC=3
+val SCE_SQL_NUMBER=4
+val SCE_SQL_WORD=5
+val SCE_SQL_STRING=6
+val SCE_SQL_CHARACTER=7
+val SCE_SQL_SQLPLUS=8
+val SCE_SQL_SQLPLUS_PROMPT=9
+val SCE_SQL_OPERATOR=10
+val SCE_SQL_IDENTIFIER=11
+val SCE_SQL_SQLPLUS_COMMENT=13
+val SCE_SQL_COMMENTLINEDOC=15
+val SCE_SQL_WORD2=16
+val SCE_SQL_COMMENTDOCKEYWORD=17
+val SCE_SQL_COMMENTDOCKEYWORDERROR=18
+val SCE_SQL_USER1=19
+val SCE_SQL_USER2=20
+val SCE_SQL_USER3=21
+val SCE_SQL_USER4=22
+val SCE_SQL_QUOTEDIDENTIFIER=23
+# Lexical states for SCLEX_SMALLTALK
+lex Smalltalk=SCLEX_SMALLTALK SCE_ST_
+val SCE_ST_DEFAULT=0
+val SCE_ST_STRING=1
+val SCE_ST_NUMBER=2
+val SCE_ST_COMMENT=3
+val SCE_ST_SYMBOL=4
+val SCE_ST_BINARY=5
+val SCE_ST_BOOL=6
+val SCE_ST_SELF=7
+val SCE_ST_SUPER=8
+val SCE_ST_NIL=9
+val SCE_ST_GLOBAL=10
+val SCE_ST_RETURN=11
+val SCE_ST_SPECIAL=12
+val SCE_ST_KWSEND=13
+val SCE_ST_ASSIGN=14
+val SCE_ST_CHARACTER=15
+val SCE_ST_SPEC_SEL=16
+# Lexical states for SCLEX_FLAGSHIP (clipper)
+lex FlagShip=SCLEX_FLAGSHIP SCE_B_
+val SCE_FS_DEFAULT=0
+val SCE_FS_COMMENT=1
+val SCE_FS_COMMENTLINE=2
+val SCE_FS_COMMENTDOC=3
+val SCE_FS_COMMENTLINEDOC=4
+val SCE_FS_COMMENTDOCKEYWORD=5
+val SCE_FS_COMMENTDOCKEYWORDERROR=6
+val SCE_FS_KEYWORD=7
+val SCE_FS_KEYWORD2=8
+val SCE_FS_KEYWORD3=9
+val SCE_FS_KEYWORD4=10
+val SCE_FS_NUMBER=11
+val SCE_FS_STRING=12
+val SCE_FS_PREPROCESSOR=13
+val SCE_FS_OPERATOR=14
+val SCE_FS_IDENTIFIER=15
+val SCE_FS_DATE=16
+val SCE_FS_STRINGEOL=17
+val SCE_FS_CONSTANT=18
+val SCE_FS_ASM=19
+val SCE_FS_LABEL=20
+val SCE_FS_ERROR=21
+val SCE_FS_HEXNUMBER=22
+val SCE_FS_BINNUMBER=23
+# Lexical states for SCLEX_CSOUND
+lex Csound=SCLEX_CSOUND SCE_CSOUND_
+val SCE_CSOUND_DEFAULT=0
+val SCE_CSOUND_COMMENT=1
+val SCE_CSOUND_NUMBER=2
+val SCE_CSOUND_OPERATOR=3
+val SCE_CSOUND_INSTR=4
+val SCE_CSOUND_IDENTIFIER=5
+val SCE_CSOUND_OPCODE=6
+val SCE_CSOUND_HEADERSTMT=7
+val SCE_CSOUND_USERKEYWORD=8
+val SCE_CSOUND_COMMENTBLOCK=9
+val SCE_CSOUND_PARAM=10
+val SCE_CSOUND_ARATE_VAR=11
+val SCE_CSOUND_KRATE_VAR=12
+val SCE_CSOUND_IRATE_VAR=13
+val SCE_CSOUND_GLOBAL_VAR=14
+val SCE_CSOUND_STRINGEOL=15
# Events
evt void Key=2005(int ch, int modifiers)
evt void DoubleClick=2006(void)
evt void UpdateUI=2007(void)
-# The old name for SCN_UPDATEUI
-val SCN_CHECKBRACE=2007
evt void Modified=2008(int position, int modificationType, string text, int length, int linesAdded, int line, int foldLevelNow, int foldLevelPrev)
-# Optional module for macro recording
evt void MacroRecord=2009(int message, int wParam, int lParam)
evt void MarginClick=2010(int modifiers, int position, int margin)
evt void NeedShown=2011(int position, int length)
-evt void PosChanged=2012(int position)
-
-cat Deprecated
-
-################################################
-# From WinDefs.h
-
-# ***** DEPRECATED from here to end of file ******
-
-# Will a paste succeed?
-fun bool EM_CanPaste=1074(,)
-
-# Are there any undoable actions in the undo history.
-fun bool EM_CanUndo=198(,)
-
-# Find the position and line from a point within the window.
-fun int EM_CharFromPos=215(,point pt)
-
-# Delete the undo history.
-fun void EM_EmptyUndoBuffer=205(,)
-
-# Retrieve the selection range.
-fun void EM_ExGetSel=1076(,charrangeresult cr)
-
-# Retrieve the line number of a position in the document.
-get int EM_ExLineFromChar=1078(,position pos)
-
-# Select a range of text.
-fun void EM_ExSetSel=1079(,charrange cr)
-
-# Find some text in the document.
-fun position EM_FindText=1080(int flags, findtext ft)
-
-# Find some text in the document. Returns range of found text in ft argument.
-fun position EM_FindTextEx=1103(int flags, findtextex ft)
-
-# On Windows will draw the document into a display context such as a printer.
-fun void EM_FormatRange=1081(bool draw, formatrange fr)
-
-# Retrieve the line at the top of the display.
-get int EM_GetFirstVisibleLine=206(,)
-
-# Retrieve the contents of a line.
-# Returns the length of the line.
-fun int EM_GetLine=196(int line, countedstring text)
-
-# Returns the number of lines in the document. There is always at least one.
-fun int EM_GetLineCount=186(,)
-
-# Returns the size in pixels of left and right margins packed into one integer.
-# The left margin is in the low half and the right margin in the high half.
-fun int EM_GetMargins=212(,)
-
-# Is the document different from when it was last saved?
-get bool EM_GetModify=184(,)
-
-# Get the area used to display the document.
-fun void EM_GetRect=178(,rectangle r)
-
-# Return the selection packed into one integer with the start of the selection
-# in the low half and the end in the high half.
-fun int EM_GetSel=176(,)
-
-# Retrieve the selected text.
-# Return the length of the text.
-fun int EM_GetSelText=1086(,stringresult text)
-
-# Retrieve a range of text.
-# Return the length of the text.
-fun int EM_GetTextRange=1099(, textrange tr)
-
-# Draw the selection in normal style or with selection highlighted.
-fun void EM_HideSelection=1087(bool normal,)
-
-# Retrieve the line of a position.
-fun int EM_LineFromChar=201(position pos,)
-
-# Retrieve the position at the start of a line.
-fun position EM_LineIndex=187(int line,)
-
-# Retrieve the number of characters on a line not including end of line characters.
-fun int EM_LineLength=193(int line,)
-
-# Scroll horizontally and vertically.
-fun void EM_LineScroll=182(int columns, int lines)
-
-# Retrieve the point in the window where a position is displayed.
-fun void EM_PosFromChar=214(pointresult pt, position pos)
-
-# Replace the selected text with the argument text.
-fun void EM_ReplaceSel=194(, string text)
-
-# Ensure the caret is visible.
-fun void EM_ScrollCaret=183(,)
-
-# Returns SEL_EMPTY if selection contains no characters, otherwise SEL_TEXT.
-fun void EM_SelectionType=1090(,)
-
-# Set the width of the left and right margins
-fun void EM_SetMargins=211(int flags, int values)
-
-# Set to read only or read write.
-set void EM_SetReadOnly=207(bool readOnly,)
-
-# Select the range of text from start to end.
-fun void EM_SetSel=177(position start, position end)
-
-# Undo one action in the undo history.
-fun void EM_Undo=199(,)
-
-# Null operation.
-fun void WM_Null=0(,)
-
-# Clear the selection.
-fun void WM_Clear=771(,)
-
-fun void WM_Command=273(,)
-
-# Copy the selection to the clipboard.
-fun void WM_Copy=769(,)
-
-# Cut the selection to the clipboard.
-fun void WM_Cut=768(,)
-
-# Retrieve all the text in the document.
-# Returns number of characters retrieved.
-fun int WM_GetText=13(int length, stringresult text)
-
-# Retrieve the number of characters in the document.
-fun int WM_GetTextLength=14(,)
-
-# Notification back to container
-fun void WM_Notify=78(int id, int stuff)
-
-# Paste the contents of the clipboard into the document replacing the selection.
-fun void WM_Paste=770(,)
+evt void Painted=2013(void)
+evt void UserListSelection=2014(int listType, string text)
+evt void URIDropped=2015(string text)
+evt void DwellStart=2016(int position)
+evt void DwellEnd=2017(int position)
+evt void Zoom=2018(void)
+evt void HotSpotClick=2019(int modifiers, int position)
+evt void HotSpotDoubleClick=2020(int modifiers, int position)
+evt void CallTipClick=2021(int position)
+evt void AutoCSelection=2022(string text)
+
+cat Deprecated
+
+# CARET_POLICY changed in 1.47
+fun void SetCaretPolicy=2369(int caretPolicy, int caretSlop)
+val CARET_CENTER=0x02
+val CARET_XEVEN=0x08
+val CARET_XJUMPS=0x10
-# Replace the contents of the document with the argument text.
-fun void WM_SetText=12(, string text)
+# The old name for SCN_UPDATEUI
+val SCN_CHECKBRACE=2007
+evt void PosChanged=2012(int position)
-# Undo one action in the undo history.
-fun void WM_Undo=772(,)
-
-# Notification codes
-val EN_CHANGE=768
-val EN_KILLFOCUS=512
-val EN_SETFOCUS=256
-
-# Flags for setting margins.
-val EC_LEFTMARGIN=1
-val EC_RIGHTMARGIN=2
-val EC_USEFONTINFO=0xffff
-
-# Selection type.
-val SEL_EMPTY=0
-val SEL_TEXT=1
-
-# Find replace mask constants
-val FR_MATCHCASE=0x4
-val FR_WHOLEWORD=0x2
-val FR_DOWN=0x1
-
-# Key modifier flag.
-val SHIFT_PRESSED=1
-val LEFT_CTRL_PRESSED=2
-val LEFT_ALT_PRESSED=4
-
-#events
-evt void EN_Change=768(void)
+# SCLEX_HTML should be used in preference to these.
+val SCLEX_ASP=29
+val SCLEX_PHP=30
projects / wxWidgets.git / blobdiff