## A line starting with ## is a pure comment and should be stripped by readers.
## A line starting with #! is for future shbang use
-## A line starting with # followed by a space is a documentation comment and refers
+## A line starting with # followed by a space is a documentation comment and refers
## to the next feature definition.
## Each feature is defined by a line starting with fun, get, set, val or evt.
## point -> x,y
## pointresult -> like point, but output param
## rectangle -> left,top,right,bottom
-## Client code should ignore definitions containing types it does not understand, except
+## Client code should ignore definitions containing types it does not understand, except
## for possibly #defining the constants
-cat Basics
+cat Basics
################################################
## For Scintilla.h
# Redoes the next action on the undo history
fun void Redo=2011(,)
-# Choose between collecting actions into the undo
+# Choose between collecting actions into the undo
# history and discarding them.
set void SetUndoCollection=2012(bool collectUndo,)
# Select all the text in the document.
fun void SelectAll=2013(,)
-# Remember the current position in the undo history as the position
+# Remember the current position in the undo history as the position
# at which the document was saved.
fun void SetSavePoint=2014(,)
# Find the position from a point within the window.
fun int PositionFromPoint=2022(int x, int y)
+# Find the position from a point within the window but return
+# INVALID_POSITION if not close to text.
+fun int PositionFromPointClose=2023(int x, int y)
+
# Set caret to start of a line and ensure it is visible.
fun void GotoLine=2024(int line,)
# Retrieve the position of the last correctly styled character.
get position GetEndStyled=2028(,)
-# Convert all line endings in the document to use the current mode.
-fun void ConvertEOLs=2029(,)
-
val SC_EOL_CRLF=0
val SC_EOL_CR=1
val SC_EOL_LF=2
+# Convert all line endings in the document to one mode.
+fun void ConvertEOLs=2029(int eolMode,)
+
# Retrieve the current end of line mode - one of CRLF, CR, or LF.
get int GetEOLMode=2030(,)
set void SetEOLMode=2031(int eolMode,)
# Set the current styling position to pos and the styling mask to mask.
-# The styling mask can be used to protect some bits in each styling byte from
+# The styling mask can be used to protect some bits in each styling byte from
# modification.
fun void StartStyling=2032(position pos, int mask)
# before drawing it to the screen to avoid flicker.
set void SetBufferedDraw=2035(bool buffered,)
-# Change the visible size of a tab to be a multiple of the width of a space
+# Change the visible size of a tab to be a multiple of the width of a space
# character.
set void SetTabWidth=2036(int tabWidth,)
-# Retrieve the visible size of a tab.
+# Retrieve the visible size of a tab.
get int GetTabWidth=2121(,)
# The SC_CP_UTF8 value can be used to enter Unicode mode.
val SC_MARK_MINUS=7
val SC_MARK_PLUS=8
+# Shapes used for outlining column
+val SC_MARK_VLINE=9
+val SC_MARK_LCORNER=10
+val SC_MARK_TCORNER=11
+val SC_MARK_BOXPLUS=12
+val SC_MARK_BOXPLUSCONNECTED=13
+val SC_MARK_BOXMINUS=14
+val SC_MARK_BOXMINUSCONNECTED=15
+val SC_MARK_LCORNERCURVE=16
+val SC_MARK_TCORNERCURVE=17
+val SC_MARK_CIRCLEPLUS=18
+val SC_MARK_CIRCLEPLUSCONNECTED=19
+val SC_MARK_CIRCLEMINUS=20
+val SC_MARK_CIRCLEMINUSCONNECTED=21
+
+val SC_MARK_CHARACTER=10000
+
+# Markers used for outlining column
+val SC_MARKNUM_FOLDEREND=25
+val SC_MARKNUM_FOLDEROPENMID=26
+val SC_MARKNUM_FOLDERMIDTAIL=27
+val SC_MARKNUM_FOLDERTAIL=28
+val SC_MARKNUM_FOLDERSUB=29
val SC_MARKNUM_FOLDER=30
val SC_MARKNUM_FOLDEROPEN=31
# Retrieve the mouse click sensitivity of a margin.
get bool GetMarginSensitiveN=2247(int margin,)
+# Styles in range 32..37 are predefined for parts of the UI and are not used as normal styles.
+# Styles 38 and 39 are for future use.
val STYLE_DEFAULT=32
val STYLE_LINENUMBER=33
val STYLE_BRACELIGHT=34
val STYLE_BRACEBAD=35
val STYLE_CONTROLCHAR=36
val STYLE_INDENTGUIDE=37
+val STYLE_LASTPREDEFINED=39
val STYLE_MAX=127
# Character set identifiers are used in StyleSetCharacterSet.
# Set a style to be underlined or not.
set void StyleSetUnderline=2059(int style, bool underline)
+val SC_CASE_MIXED=0
+val SC_CASE_UPPER=1
+val SC_CASE_LOWER=2
+# Set a style to be mixed case, or to force upper or lower case.
+set void StyleSetCase=2060(int style, int caseForce)
+
# Set the character set of the font in a style.
set void StyleSetCharacterSet=2066(int style, int characterSet)
# Set a style to be visible or not.
set void StyleSetVisible=2074(int style, bool visible)
-# Get the time in milliseconds that the caret is on and off.
+# Get the time in milliseconds that the caret is on and off.
get int GetCaretPeriod=2075(,)
# Get the time in milliseconds that the caret is on and off. 0 = steady on.
set void SetCaretPeriod=2076(int periodMilliseconds,)
-# Set the set of characters making up words for when moving or selecting
+# Set the set of characters making up words for when moving or selecting
# by word.
set void SetWordChars=2077(, string characters)
val INDIC0_MASK=32
val INDIC1_MASK=64
val INDIC2_MASK=128
-val INDICS_MASK=INDIC0_MASK | INDIC1_MASK | INDIC2_MASK
+val INDICS_MASK=224
+##INDIC0_MASK | INDIC1_MASK | INDIC2_MASK
# Set an indicator to plain, squiggle or TT.
set void IndicSetStyle=2080(int indic, int style)
# Retrieve the extra styling information for a line.
get int GetLineState=2093(int line,)
-# Retrieve the last line number that has line state.
+# Retrieve the last line number that has line state.
get int GetMaxLineState=2094(,)
+# Is the background of the line containing the caret in a different colour?
+get bool GetCaretLineVisible=2095(,)
+
+# Display the background of the line containing the caret in a different colour.
+set void SetCaretLineVisible=2096(bool show,)
+
+# Get the colour of the background of the line containing the caret.
+get colour GetCaretLineBack=2097(,)
+
+# Set the colour of the background of the line containing the caret.
+set void SetCaretLineBack=2098(colour back,)
+
# Display a auto-completion list.
# The lenEntered parameter indicates how many characters before
# the caret should be used to provide context.
# Is there an auto-completion list visible?
fun bool AutoCActive=2102(,)
-# Retrieve the position of the caret when the auto-completion list was
+# Retrieve the position of the caret when the auto-completion list was
# displayed.
fun position AutoCPosStart=2103(,)
# Define a set of character that when typed cancel the auto-completion list.
fun void AutoCStops=2105(, string characterSet)
-# Change the separator character in the string setting up an auto-completion
+# Change the separator character in the string setting up an auto-completion
# list. Default is space but can be changed if items contain space.
set void AutoCSetSeparator=2106(int separatorCharacter,)
# Select the item in the auto-completion list that starts with a string.
fun void AutoCSelect=2108(, string text)
-# Should the auto-completion list be cancelled if the user backspaces to a
-# position before where the box was created.
+# Should the auto-completion list be cancelled if the user backspaces to a
+# position before where the box was created.
set void AutoCSetCancelAtStart=2110(bool cancel,)
# Retrieve whether auto-completion cancelled by backspacing before start.
# Define a set of character that when typed fills up the selected word.
set void AutoCSetFillUps=2112(, string characterSet)
-# Should a single item auto-completion list automatically choose the item.
+# Should a single item auto-completion list automatically choose the item.
set void AutoCSetChooseSingle=2113(bool chooseSingle,)
-# Retrieve whether a single item auto-completion list automatically choose the item.
+# Retrieve whether a single item auto-completion list automatically choose the item.
get bool AutoCGetChooseSingle=2114(,)
# Set whether case is significant when performing auto-completion searches.
set void AutoCSetIgnoreCase=2115(bool ignoreCase,)
-# Retrieve state of ignore case flag.
+# Retrieve state of ignore case flag.
get bool AutoCGetIgnoreCase=2116(,)
+# Display a list of strings and send notification when user chooses one.
+fun void UserListShow=2117(int listType, string itemList)
+
+# Set whether or not autocompletion is hidden automatically when nothing matches
+set void AutoCSetAutoHide=2118(bool autoHide,)
+
+# Retrieve whether or not autocompletion is hidden automatically when nothing matches
+get bool AutoCGetAutoHide=2119(,)
+
# Set the number of spaces used for one level of indentation.
set void SetIndent=2122(int indentSize,)
val SC_PRINT_INVERTLIGHT=1
# PrintColourMode - force black text on white background for printing.
val SC_PRINT_BLACKONWHITE=2
+# PrintColourMode - text stays coloured, but all background is forced to be white for printing.
+val SC_PRINT_COLOURONWHITE=3
+# PrintColourMode - only the default-background is forced to be white for printing.
+val SC_PRINT_COLOURONWHITEDEFAULTBG=4
# Modify colours when printing for clearer printed text.
set void SetPrintColourMode=2148(int mode,)
# Returns the print colour mode.
get int GetPrintColourMode=2149(,)
-val SCFIND_DOWN=1
val SCFIND_WHOLEWORD=2
val SCFIND_MATCHCASE=4
val SCFIND_WORDSTART=0x00100000
-# SCFIND_REGEXP is not yet implemented.
val SCFIND_REGEXP=0x00200000
# Find some text in the document.
get int GetLineCount=2154(,)
# Sets the size in pixels of the left margin.
-set void SetMarginLeft=2155(, int width)
+set void SetMarginLeft=2155(, int pixelWidth)
# Returns the size in pixels of the left margin.
get int GetMarginLeft=2156(,)
# Sets the size in pixels of the right margin.
-set void SetMarginRight=2157(, int width)
+set void SetMarginRight=2157(, int pixelWidth)
# Returns the size in pixels of the right margin.
get int GetMarginRight=2158(,)
# Returns true if overtype mode is active otherwise false is returned.
get bool GetOvertype=2187(,)
+# Set the width of the insert mode caret
+set void SetCaretWidth=2188(int pixelWidth,)
+
+# Returns the width of the insert mode caret
+get int GetCaretWidth=2189(,)
+
+# Sets the position that starts the target which is used for updating the
+# document without affecting the scroll position.
+set void SetTargetStart=2190(position pos,)
+
+# Get the position that starts the target.
+get position GetTargetStart=2191(,)
+
+# Sets the position that ends the target which is used for updating the
+# document without affecting the scroll position.
+set void SetTargetEnd=2192(position pos,)
+
+# Get the position that ends the target.
+get position GetTargetEnd=2193(,)
+
+# Replace the target text with the argument text.
+# Text is counted so it can contain nulls.
+# Returns the length of the replacement text.
+fun int ReplaceTarget=2194(int length, string text)
+
+# Replace the target text with the argument text after \d processing.
+# Text is counted so it can contain nulls.
+# Looks for \d where d is between 1 and 9 and replaces these with the strings
+# matched in the last search operation which were surrounded by \( and \).
+# Returns the length of the replacement text including any change
+# caused by processing the \d patterns.
+fun int ReplaceTargetRE=2195(int length, string text)
+
+# Search for a counted string in the target and set the target to the found
+# range. Text is counted so it can contain nulls.
+# Returns length of range or -1 for failure in which case target is not moved.
+fun int SearchInTarget=2197(int length, string text)
+
+# Set the search flags used by SearchInTarget
+set void SetSearchFlags=2198(int flags,)
+
+# Get the search flags used by SearchInTarget
+get int GetSearchFlags=2199(,)
+
# Show a call tip containing a definition near position pos.
fun void CallTipShow=2200(position pos, string definition)
# Set some debugging options for folding
fun void SetFoldFlags=2233(int flags,)
+# Ensure a particular line is visible by expanding any header line hiding it.
+# Use the currently set visibility policy to determine which range to display.
+fun void EnsureVisibleEnforcePolicy=2234(int line,)
+
+# Sets whether a tab pressed when caret is within indentation indents
+set void SetTabIndents=2260(bool tabIndents,)
+
+# Does a tab pressed when caret is within indentation indent?
+get bool GetTabIndents=2261(,)
+
+# Sets whether a backspace pressed when caret is within indentation unindents
+set void SetBackSpaceUnIndents=2262(bool bsUnIndents,)
+
+# Does a backspace pressed when caret is within indentation unindent?
+get bool GetBackSpaceUnIndents=2263(,)
+
+val SC_TIME_FOREVER=10000000
+
+# Sets the time the mouse must sit still to generate a mouse dwell event
+set void SetMouseDwellTime=2264(int periodMilliseconds,)
+
+# Retrieve the time the mouse must sit still to generate a mouse dwell event
+get int GetMouseDwellTime=2265(,)
+
## Start of key messages
# Move caret down one line.
fun void LineDown=2300(,)
# Delete the selection or if no selection, the character before the caret.
fun void DeleteBack=2326(,)
-# If selection is empty or all on one line replace the selection with a tab
+# If selection is empty or all on one line replace the selection with a tab
# character.
# If more than one line selected, indent the lines.
fun void Tab=2327(,)
# Insert a Form Feed character.
fun void FormFeed=2330(,)
-# Move caret to before first visible character on line.
+# Move caret to before first visible character on line.
# If already there move to first character on line.
fun void VCHome=2331(,)
# Scroll the document up, keeping the caret visible.
fun void LineScrollUp=2343(,)
+# Move the caret inside current view if it's not there already
+fun void MoveCaretInsideView=2401(,)
+
# How many characters are on a line, not including end of line characters.
fun int LineLength=2350(int line,)
get int GetDocPointer=2357(,)
# Change the document object used.
-set void SetDocPointer=2358(int pointer,)
+set void SetDocPointer=2358(,int pointer)
# Set which document modification events are sent to the container.
set void SetModEventMask=2359(int mask,)
# Retrieve the column number which text should be kept within.
get int GetEdgeColumn=2360(,)
-# Set the column number of the edge.
-# If text goes past the edge then it is highlighted.
+# Set the column number of the edge.
+# If text goes past the edge then it is highlighted.
set void SetEdgeColumn=2361(int column,)
# Retrieve the edge highlight mode.
fun void SearchAnchor=2366(,)
# Find some text starting at the search anchor.
+# Does not ensure the selection is visible.
fun int SearchNext=2367(int flags, string text)
# Find some text starting at the search anchor and moving backwards.
+# Does not ensure the selection is visible.
fun int SearchPrev=2368(int flags, string text)
# Show caret within N lines of edge when it's scrolled to view
+# If CARET_SLOP not set then centre caret on screen when it's
+# scrolled to view
val CARET_SLOP=0x01
-# Center caret on screen when it's scrolled to view
+# Value not used
val CARET_CENTER=0x02
-# OR this with CARET_CENTER to reposition even when visible, or
-# OR this with CARET_SLOP to reposition whenever outside slop border
+# If CARET_SLOP also set then reposition whenever outside slop border
+# If CARET_SLOP not set then recentre even when visible
val CARET_STRICT=0x04
+# If CARET_XEVEN set then both left and right margins are given equal weight
+# rather than favouring left following behaviour.
+val CARET_XEVEN=0x08
+# If CARET_XJUMPS set then when caret reaches the margin the display jumps
+# enough to leave the caret solidly within the display.
+val CARET_XJUMPS=0x10
# Set the way the line the caret is on is kept visible.
fun void SetCaretPolicy=2369(int caretPolicy, int caretSlop)
# Is the selection a rectangular. The alternative is the more common stream selection.
get bool SelectionIsRectangle=2372(,)
-# Set the zoom level. This number of points is added to the size of all fonts.
+# Set the zoom level. This number of points is added to the size of all fonts.
# It may be positive to magnify or negative to reduce.
set void SetZoom=2373(int zoom,)
# Retrieve the zoom level.
get int GetZoom=2374(,)
-# Create a new document object.
+# Create a new document object.
# Starts with reference count of 1 and not selected into editor.
fun int CreateDocument=2375(,)
# Extend life of document.
# Get which document modification events are sent to the container.
get int GetModEventMask=2378(,)
+# Change internal focus flag
+set void SetFocus=2380(bool focus,)
+# Get internal focus flag
+get bool GetFocus=2381(,)
+
+# Change error status - 0 = OK
+set void SetStatus=2382(int statusCode,)
+# Get error status
+get int GetStatus=2383(,)
+
+# Set whether the mouse is captured when its button is pressed
+set void SetMouseDownCaptures=2384(bool captures,)
+# Get whether mouse gets captured
+get bool GetMouseDownCaptures=2385(,)
+
+val SC_CURSORNORMAL=-1
+val SC_CURSORWAIT=3
+# Sets the cursor to one of the SC_CURSOR* values
+set void SetCursor=2386(int cursorType,)
+# Get cursor type
+get int GetCursor=2387(,)
+
+# Move to the previous change in capitalistion
+fun void WordPartLeft=2390(,)
+# Move to the previous change in capitalistion extending selection to new caret position.
+fun void WordPartLeftExtend=2391(,)
+# Move to the change next in capitalistion
+fun void WordPartRight=2392(,)
+# Move to the next change in capitalistion extending selection to new caret position.
+fun void WordPartRightExtend=2393(,)
+
+# Constants for use with SetVisiblePolicy, similar to SetCaretPolicy
+val VISIBLE_SLOP=0x01
+val VISIBLE_STRICT=0x04
+# Set the way the display area is determined when a particular line is to be moved to.
+fun void SetVisiblePolicy=2394(int visiblePolicy, int visibleSlop)
+
+# Delete back from the current position to the start of the line
+fun void DelLineLeft=2395(,)
+
+# Delete forwards from the current position to the end of the line
+fun void DelLineRight=2396(,)
+
# Set the focus to this Scintilla widget.
# GTK+ Specific
fun void GrabFocus=2400(,)
# Stop notifying the container of all key presses and commands.
fun void StopRecord=3002(,)
-# Set the lexing language of the document.
+# Set the lexing language of the document.
set void SetLexer=4001(int lexer,)
-# Retrieve the lexing language of the document.
+# Retrieve the lexing language of the document.
get int GetLexer=4002(,)
# Colourise a segment of the document using the current lexing language.
# Set up the key words used by the lexer.
set void SetKeyWords=4005(int keywordSet, string keyWords)
+# Set the lexing language of the document based on string name.
+set void SetLexerLanguage=4006(, string language)
+
# Notifications
# Type of modification and the action which caused the modification
# These are defined as a bit mask to make it easy to specify which notifications are wanted.
val SCLEX_LATEX=14
val SCLEX_LUA=15
val SCLEX_DIFF=16
+val SCLEX_CONF=17
+val SCLEX_PASCAL=18
+val SCLEX_AVE=19
+val SCLEX_ADA=20
+val SCLEX_LISP=21
+val SCLEX_RUBY=22
+val SCLEX_EIFFEL=23
+val SCLEX_EIFFELKW=24
+val SCLEX_TCL=25
+val SCLEX_NNCRONTAB=26
+# When a lexer specifies its language as SCLEX_AUTOMATIC it receives a
+# value assigned in sequence from SCLEX_AUTOMATIC+1.
+val SCLEX_AUTOMATIC=1000
# Lexical states for SCLEX_PYTHON
val SCE_P_DEFAULT=0
val SCE_P_COMMENTLINE=1
val SCE_C_IDENTIFIER=11
val SCE_C_STRINGEOL=12
val SCE_C_VERBATIM=13
+val SCE_C_REGEX=14
+val SCE_C_COMMENTLINEDOC=15
+val SCE_C_WORD2=16
+val SCE_C_COMMENTDOCKEYWORD=17
+val SCE_C_COMMENTDOCKEYWORDERROR=18
# Lexical states for SCLEX_HTML, SCLEX_XML
val SCE_H_DEFAULT=0
val SCE_H_TAG=1
val SCE_H_QUESTION=18
# More HTML
val SCE_H_VALUE=19
+# X-Code
+val SCE_H_XCCOMMENT=20
+# SGML
+val SCE_H_SGML_DEFAULT=21
+val SCE_H_SGML_COMMAND=22
+val SCE_H_SGML_1ST_PARAM=23
+val SCE_H_SGML_DOUBLESTRING=24
+val SCE_H_SGML_SIMPLESTRING=25
+val SCE_H_SGML_ERROR=26
+val SCE_H_SGML_SPECIAL=27
+val SCE_H_SGML_ENTITY=28
+val SCE_H_SGML_COMMENT=29
+val SCE_H_SGML_1ST_PARAM_COMMENT=30
+val SCE_H_SGML_BLOCK_DEFAULT=31
# Embedded Javascript
val SCE_HJ_START=40
val SCE_HJ_DEFAULT=41
val SCE_HJ_SINGLESTRING=49
val SCE_HJ_SYMBOLS=50
val SCE_HJ_STRINGEOL=51
+val SCE_HJ_REGEX=52
# ASP Javascript
val SCE_HJA_START=55
val SCE_HJA_DEFAULT=56
val SCE_HJA_SINGLESTRING=64
val SCE_HJA_SYMBOLS=65
val SCE_HJA_STRINGEOL=66
+val SCE_HJA_REGEX=67
# Embedded VBScript
val SCE_HB_START=70
val SCE_HB_DEFAULT=71
val SCE_HPHP_VARIABLE=123
val SCE_HPHP_COMMENT=124
val SCE_HPHP_COMMENTLINE=125
-val SCE_HPHP_STRINGEOL=126
+val SCE_HPHP_HSTRING_VARIABLE=126
+val SCE_HPHP_OPERATOR=127
# Lexical states for SCLEX_PERL
val SCE_PL_DEFAULT=0
-val SCE_PL_HERE=1
+val SCE_PL_ERROR=1
val SCE_PL_COMMENTLINE=2
val SCE_PL_POD=3
val SCE_PL_NUMBER=4
val SCE_PL_ARRAY=13
val SCE_PL_HASH=14
val SCE_PL_SYMBOLTABLE=15
-val SCE_PL_REF=16
val SCE_PL_REGEX=17
val SCE_PL_REGSUBST=18
val SCE_PL_LONGQUOTE=19
val SCE_PL_BACKTICKS=20
val SCE_PL_DATASECTION=21
+val SCE_PL_HERE_DELIM=22
+val SCE_PL_HERE_Q=23
+val SCE_PL_HERE_QQ=24
+val SCE_PL_HERE_QX=25
+val SCE_PL_STRING_Q=26
+val SCE_PL_STRING_QQ=27
+val SCE_PL_STRING_QX=28
+val SCE_PL_STRING_QR=29
+val SCE_PL_STRING_QW=30
# Lexical states for SCLEX_LATEX
val SCE_L_DEFAULT=0
val SCE_L_COMMAND=1
val SCE_LUA_OPERATOR=10
val SCE_LUA_IDENTIFIER=11
val SCE_LUA_STRINGEOL=12
+# Lexical states for SCLEX_ERRORLIST
val SCE_ERR_DEFAULT=0
val SCE_ERR_PYTHON=1
val SCE_ERR_GCC=2
val SCE_ERR_CMD=4
val SCE_ERR_BORLAND=5
val SCE_ERR_PERL=6
+val SCE_ERR_NET=7
+val SCE_ERR_LUA=8
+val SCE_ERR_DIFF_CHANGED=10
+val SCE_ERR_DIFF_ADDITION=11
+val SCE_ERR_DIFF_DELETION=12
+val SCE_ERR_DIFF_MESSAGE=13
+# Lexical states for SCLEX_BATCH
+val SCE_BAT_DEFAULT=0
+val SCE_BAT_COMMENT=1
+val SCE_BAT_WORD=2
+val SCE_BAT_LABEL=3
+val SCE_BAT_HIDE=4
+val SCE_BAT_COMMAND=5
+val SCE_BAT_IDENTIFIER=6
+val SCE_BAT_OPERATOR=7
+# Lexical states for SCLEX_MAKEFILE
+val SCE_MAKE_DEFAULT=0
+val SCE_MAKE_COMMENT=1
+val SCE_MAKE_PREPROCESSOR=2
+val SCE_MAKE_IDENTIFIER=3
+val SCE_MAKE_OPERATOR=4
+val SCE_MAKE_TARGET=5
+val SCE_MAKE_IDEOL=9
+# Lexical states for the SCLEX_CONF (Apache Configuration Files Lexer)
+val SCE_CONF_DEFAULT=0
+val SCE_CONF_COMMENT=1
+val SCE_CONF_NUMBER=2
+val SCE_CONF_IDENTIFIER=3
+val SCE_CONF_EXTENSION=4
+val SCE_CONF_PARAMETER=5
+val SCE_CONF_STRING=6
+val SCE_CONF_OPERATOR=7
+val SCE_CONF_IP=8
+val SCE_CONF_DIRECTIVE=9
+# Avenue
+val SCE_AVE_DEFAULT=0
+val SCE_AVE_COMMENT=1
+val SCE_AVE_NUMBER=2
+val SCE_AVE_WORD=3
+val SCE_AVE_KEYWORD=4
+val SCE_AVE_STATEMENT=5
+val SCE_AVE_STRING=6
+val SCE_AVE_ENUM=7
+val SCE_AVE_STRINGEOL=8
+val SCE_AVE_IDENTIFIER=9
+val SCE_AVE_OPERATOR=10
+# Lexical states for SCLEX_ADA
+val SCE_ADA_DEFAULT=0
+val SCE_ADA_COMMENT=1
+val SCE_ADA_NUMBER=2
+val SCE_ADA_WORD=3
+val SCE_ADA_STRING=4
+val SCE_ADA_CHARACTER=5
+val SCE_ADA_OPERATOR=6
+val SCE_ADA_IDENTIFIER=7
+val SCE_ADA_STRINGEOL=8
+# Lexical states for SCLEX_LISP
+val SCE_LISP_DEFAULT=0
+val SCE_LISP_COMMENT=1
+val SCE_LISP_NUMBER=2
+val SCE_LISP_KEYWORD=3
+val SCE_LISP_STRING=6
+val SCE_LISP_STRINGEOL=8
+val SCE_LISP_IDENTIFIER=9
+val SCE_LISP_OPERATOR=10
+# Lexical states for SCLEX_EIFFEL and SCLEX_EIFFELKW
+val SCE_EIFFEL_DEFAULT=0
+val SCE_EIFFEL_COMMENTLINE=1
+val SCE_EIFFEL_NUMBER=2
+val SCE_EIFFEL_WORD=3
+val SCE_EIFFEL_STRING=4
+val SCE_EIFFEL_CHARACTER=5
+val SCE_EIFFEL_OPERATOR=6
+val SCE_EIFFEL_IDENTIFIER=7
+val SCE_EIFFEL_STRINGEOL=8
+# Lexical states for the SCLEX_NNCRONTAB (nnCron crontab Lexer)
+val SCE_NNCRONTAB_DEFAULT=0
+val SCE_NNCRONTAB_COMMENT=1
+val SCE_NNCRONTAB_TASK=2
+val SCE_NNCRONTAB_SECTION=3
+val SCE_NNCRONTAB_KEYWORD=4
+val SCE_NNCRONTAB_MODIFIER=5
+val SCE_NNCRONTAB_ASTERISK=6
+val SCE_NNCRONTAB_NUMBER=7
+val SCE_NNCRONTAB_STRING=8
+val SCE_NNCRONTAB_ENVIRONMENT=9
+val SCE_NNCRONTAB_IDENTIFIER=10
# Events
evt void MarginClick=2010(int modifiers, int position, int margin)
evt void NeedShown=2011(int position, int length)
evt void PosChanged=2012(int position)
+evt void Painted=2013(void)
+evt void UserListSelection=2014(int listType, string text)
+evt void URIDropped=2015(string text)
+evt void DwellStart=2016(int position)
+evt void DwellEnd=2017(int position)
-cat Deprecated
-
-################################################
-# From WinDefs.h
-
-# ***** DEPRECATED from here to end of file ******
-
-# Will a paste succeed?
-fun bool EM_CanPaste=1074(,)
-
-# Are there any undoable actions in the undo history.
-fun bool EM_CanUndo=198(,)
-
-# Find the position and line from a point within the window.
-fun int EM_CharFromPos=215(,point pt)
-
-# Delete the undo history.
-fun void EM_EmptyUndoBuffer=205(,)
-
-# Retrieve the selection range.
-fun void EM_ExGetSel=1076(,charrangeresult cr)
-
-# Retrieve the line number of a position in the document.
-get int EM_ExLineFromChar=1078(,position pos)
-
-# Select a range of text.
-fun void EM_ExSetSel=1079(,charrange cr)
-
-# Find some text in the document.
-fun position EM_FindText=1080(int flags, findtext ft)
-
-# Find some text in the document. Returns range of found text in ft argument.
-fun position EM_FindTextEx=1103(int flags, findtextex ft)
-
-# On Windows will draw the document into a display context such as a printer.
-fun void EM_FormatRange=1081(bool draw, formatrange fr)
-
-# Retrieve the line at the top of the display.
-get int EM_GetFirstVisibleLine=206(,)
-
-# Retrieve the contents of a line.
-# Returns the length of the line.
-fun int EM_GetLine=196(int line, countedstring text)
-
-# Returns the number of lines in the document. There is always at least one.
-fun int EM_GetLineCount=186(,)
-
-# Returns the size in pixels of left and right margins packed into one integer.
-# The left margin is in the low half and the right margin in the high half.
-fun int EM_GetMargins=212(,)
-
-# Is the document different from when it was last saved?
-get bool EM_GetModify=184(,)
-
-# Get the area used to display the document.
-fun void EM_GetRect=178(,rectangle r)
-
-# Return the selection packed into one integer with the start of the selection
-# in the low half and the end in the high half.
-fun int EM_GetSel=176(,)
-
-# Retrieve the selected text.
-# Return the length of the text.
-fun int EM_GetSelText=1086(,stringresult text)
-
-# Retrieve a range of text.
-# Return the length of the text.
-fun int EM_GetTextRange=1099(, textrange tr)
-
-# Draw the selection in normal style or with selection highlighted.
-fun void EM_HideSelection=1087(bool normal,)
-
-# Retrieve the line of a position.
-fun int EM_LineFromChar=201(position pos,)
-
-# Retrieve the position at the start of a line.
-fun position EM_LineIndex=187(int line,)
-
-# Retrieve the number of characters on a line not including end of line characters.
-fun int EM_LineLength=193(int line,)
-
-# Scroll horizontally and vertically.
-fun void EM_LineScroll=182(int columns, int lines)
-
-# Retrieve the point in the window where a position is displayed.
-fun void EM_PosFromChar=214(pointresult pt, position pos)
-
-# Replace the selected text with the argument text.
-fun void EM_ReplaceSel=194(, string text)
-
-# Ensure the caret is visible.
-fun void EM_ScrollCaret=183(,)
-
-# Returns SEL_EMPTY if selection contains no characters, otherwise SEL_TEXT.
-fun void EM_SelectionType=1090(,)
-
-# Set the width of the left and right margins
-fun void EM_SetMargins=211(int flags, int values)
-
-# Set to read only or read write.
-set void EM_SetReadOnly=207(bool readOnly,)
-
-# Select the range of text from start to end.
-fun void EM_SetSel=177(position start, position end)
-
-# Undo one action in the undo history.
-fun void EM_Undo=199(,)
-
-# Null operation.
-fun void WM_Null=0(,)
-
-# Clear the selection.
-fun void WM_Clear=771(,)
-
-fun void WM_Command=273(,)
-
-# Copy the selection to the clipboard.
-fun void WM_Copy=769(,)
-
-# Cut the selection to the clipboard.
-fun void WM_Cut=768(,)
-
-# Retrieve all the text in the document.
-# Returns number of characters retrieved.
-fun int WM_GetText=13(int length, stringresult text)
-
-# Retrieve the number of characters in the document.
-fun int WM_GetTextLength=14(,)
-
-# Notification back to container
-fun void WM_Notify=78(int id, int stuff)
-
-# Paste the contents of the clipboard into the document replacing the selection.
-fun void WM_Paste=770(,)
-
-# Replace the contents of the document with the argument text.
-fun void WM_SetText=12(, string text)
-
-# Undo one action in the undo history.
-fun void WM_Undo=772(,)
-
-# Notification codes
-val EN_CHANGE=768
-val EN_KILLFOCUS=512
-val EN_SETFOCUS=256
-
-# Flags for setting margins.
-val EC_LEFTMARGIN=1
-val EC_RIGHTMARGIN=2
-val EC_USEFONTINFO=0xffff
-
-# Selection type.
-val SEL_EMPTY=0
-val SEL_TEXT=1
-
-# Find replace mask constants
-val FR_MATCHCASE=0x4
-val FR_WHOLEWORD=0x2
-val FR_DOWN=0x1
-
-# Key modifier flag.
-val SHIFT_PRESSED=1
-val LEFT_CTRL_PRESSED=2
-val LEFT_ALT_PRESSED=4
-
-#events
-evt void EN_Change=768(void)
+cat Deprecated
projects / wxWidgets.git / blobdiff