dnl Top-level configure.in for wxWidgets by Robert Roebling, Phil Blecker,
dnl Vadim Zeitlin and Ron Lee
dnl
-dnl This script is under the wxWidgets licence.
+dnl This script is under the wxWindows licence.
dnl
dnl Version: $Id$
dnl ---------------------------------------------------------------------------
dnl initialization
dnl ---------------------------------------------------------------------------
-AC_INIT([wxWidgets], [2.9.0], [wx-dev@lists.wxwidgets.org])
+AC_INIT([wxWidgets], [2.9.2], [wx-dev@lists.wxwidgets.org])
dnl the file passed to AC_CONFIG_SRCDIR should be specific to our package
AC_CONFIG_SRCDIR([wx-config.in])
-dnl sets build, host, target variables and the same with _alias
+dnl sets build, host variables and the same with _alias
AC_CANONICAL_BUILD
AC_CANONICAL_HOST
-AC_CANONICAL_TARGET
+dnl notice that if --host was given but --build was not, cross_compiling is
+dnl only set to "maybe" and not "yes" and will be either set to "yes" later or
+dnl configure will exit with error in AC_PROG_CC so don't test for = "yes" here
+if test "$cross_compiling" != "no"; then
+ HOST_PREFIX="${host_alias}-"
+ HOST_SUFFIX="-$host_alias"
+else
+ HOST_PREFIX=
+ HOST_SUFFIX=
+fi
dnl When making releases do:
dnl
wx_major_version_number=2
wx_minor_version_number=9
-wx_release_number=0
+wx_release_number=2
wx_subrelease_number=0
WX_RELEASE=$wx_major_version_number.$wx_minor_version_number
dnl the list of all available toolkits
dnl
dnl update NUM_TOOLKITS calculation below when adding a new toolkit here!
-ALL_TOOLKITS="COCOA GTK MAC MGL MICROWIN MOTIF MSW PM X11 DFB"
+ALL_TOOLKITS="COCOA GTK OSX_CARBON OSX_COCOA OSX_IPHONE MGL MICROWIN MOTIF MSW PM X11 DFB"
dnl NB: these wxUSE_XXX constants have value of 0 or 1 unlike all the other ones
dnl which are either yes or no
-DEFAULT_wxUSE_COCOA=0
+DEFAULT_wxUSE_OLD_COCOA=0
DEFAULT_wxUSE_GTK=0
-DEFAULT_wxUSE_MAC=0
+DEFAULT_wxUSE_OSX_CARBON=0
+DEFAULT_wxUSE_OSX_COCOA=0
+DEFAULT_wxUSE_OSX_IPHONE=0
DEFAULT_wxUSE_MGL=0
DEFAULT_wxUSE_MICROWIN=0
DEFAULT_wxUSE_MOTIF=0
DEFAULT_wxUSE_X11=0
DEFAULT_wxUSE_DFB=0
-dnl these are the values which are really default for the given platform -
-dnl they're not cached and are only used if no --with-toolkit was given *and*
-dnl nothing was found in the cache
-DEFAULT_DEFAULT_wxUSE_COCOA=0
+dnl these are the values which are really default for the given platform:
+dnl they're used if no --with-<toolkit> options were given to detect the
+dnl toolkit to use by default for the target platform
+DEFAULT_DEFAULT_wxUSE_OLD_COCOA=0
DEFAULT_DEFAULT_wxUSE_GTK=0
-DEFAULT_DEFAULT_wxUSE_MAC=0
+DEFAULT_DEFAULT_wxUSE_OSX_CARBON=0
+DEFAULT_DEFAULT_wxUSE_OSX_COCOA=0
+DEFAULT_DEFAULT_wxUSE_OSX_IPHONE=0
DEFAULT_DEFAULT_wxUSE_MGL=0
DEFAULT_DEFAULT_wxUSE_MICROWIN=0
DEFAULT_DEFAULT_wxUSE_MOTIF=0
DEFAULT_DEFAULT_wxUSE_DFB=0
PROGRAM_EXT=
-SO_SUFFIX=so
SAMPLES_RPATH_FLAG=
-SAMPLES_RPATH_POSTLINK=
+DYLIB_RPATH_INSTALL=
+DYLIB_RPATH_POSTLINK=
DEFAULT_STD_FLAG=yes
USE_HPUX=1
DEFAULT_DEFAULT_wxUSE_MOTIF=1
NEEDS_D_REENTRANT_FOR_R_FUNCS=1
- SO_SUFFIX=sl
AC_DEFINE(__HPUX__)
dnl many standard declarations in HP-UX headers are only included if either
AC_DEFINE(__SVR4__)
DEFAULT_DEFAULT_wxUSE_MOTIF=1
;;
+ *-*-qnx*)
+ USE_QNX=1
+ AC_DEFINE(__QNX__)
+ DEFAULT_DEFAULT_wxUSE_X11=1
+ ;;
*-*-solaris2* )
USE_SUN=1
USE_SOLARIS=1
USE_AIX=1
USE_SYSV=1
USE_SVR4=1
- dnl quoting from http://www-1.ibm.com/servers/esdd/articles/gnu.html:
- dnl
- dnl Both archive libraries and shared libraries on AIX have an .a
- dnl extension. This will explain why you can't link with an .so and
- dnl why it works with the name changed to .a.
- SO_SUFFIX=a
AC_DEFINE(__AIX__)
AC_DEFINE(__SYSV__)
AC_DEFINE(__SVR4__)
dnl MBN: some of the defines have been moved after toolkit detection
dnl because for wxMotif/wxGTK/wxX11 to build on Cygwin
dnl USE_UNIX must be set and not USE_WIN32
- SO_SUFFIX=dll
PROGRAM_EXT=".exe"
DEFAULT_DEFAULT_wxUSE_MSW=1
;;
DEFAULT_STD_FLAG=no
;;
+ arm-apple-darwin*)
+ dnl iPhone
+ USE_BSD=1
+ USE_DARWIN=1
+ AC_DEFINE(__BSD__)
+ AC_DEFINE(__DARWIN__)
+ DEFAULT_DEFAULT_wxUSE_OSX_IPHONE=1
+ ;;
+
*-*-darwin* )
dnl Darwin based distributions (including Mac OS X)
USE_BSD=1
USE_DARWIN=1
- SO_SUFFIX=dylib
AC_DEFINE(__BSD__)
AC_DEFINE(__DARWIN__)
AC_DEFINE(TARGET_CARBON)
- DEFAULT_DEFAULT_wxUSE_MAC=1
- DEFAULT_STD_FLAG=no
- ;;
- powerpc-apple-macos* )
- dnl Classic Mac OS (< X)
- USE_UNIX=0
- dnl For some reason the test that should be cross-compiler capable fails
- dnl However, there is no doubt that MacOS PowerPC is big endian.
- ac_cv_c_bigendian=yes
- SO_SUFFIX=shlib
- dnl AC_DEFINE(TARGET_CARBON)
- dnl platform.h needs TARGET_CARBON before setup.h, we'll add it to CPPFLAGS
- DEFAULT_DEFAULT_wxUSE_MAC=1
- DEFAULT_STD_FLAG=no
+ DEFAULT_DEFAULT_wxUSE_OSX_CARBON=1
;;
*-*-beos* )
dnl
dnl NB: see also DEFAULT_wxUSE<toolkit> variables defined above
-WX_ARG_CACHE_INIT
-
-dnl useful to test the compilation with minimum options, define as 0 for normal
-dnl usage
-DEBUG_CONFIGURE=0
-if test $DEBUG_CONFIGURE = 1; then
- DEFAULT_wxUSE_UNIVERSAL=no
- DEFAULT_wxUSE_STL=no
-
- DEFAULT_wxUSE_NANOX=no
-
- DEFAULT_wxUSE_THREADS=yes
-
- DEFAULT_wxUSE_SHARED=${DEFAULT_wxUSE_SHARED:-yes}
- DEFAULT_wxUSE_OPTIMISE=no
- DEFAULT_wxUSE_PROFILE=no
- DEFAULT_wxUSE_NO_DEPS=no
- DEFAULT_wxUSE_VARARG_MACROS=no
- DEFAULT_wxUSE_NO_RTTI=no
- DEFAULT_wxUSE_NO_EXCEPTIONS=no
- DEFAULT_wxUSE_UNIVERSAL_BINARY=no
- DEFAULT_wxUSE_RPATH=yes
- DEFAULT_wxUSE_PERMISSIVE=no
- DEFAULT_wxUSE_DEBUG_FLAG=yes
- DEFAULT_wxUSE_DEBUG_INFO=yes
- DEFAULT_wxUSE_DEBUG_GDB=yes
- DEFAULT_wxUSE_MEM_TRACING=no
- DEFAULT_wxUSE_DEBUG_CONTEXT=no
- DEFAULT_wxUSE_DMALLOC=no
- DEFAULT_wxUSE_APPLE_IEEE=no
-
- DEFAULT_wxUSE_EXCEPTIONS=no
- DEFAULT_wxUSE_LOG=yes
- DEFAULT_wxUSE_LOGWINDOW=no
- DEFAULT_wxUSE_LOGGUI=no
- DEFAULT_wxUSE_LOGDIALOG=no
-
- DEFAULT_wxUSE_GUI=yes
- DEFAULT_wxUSE_CONTROLS=no
-
- DEFAULT_wxUSE_REGEX=no
- DEFAULT_wxUSE_XML=no
- DEFAULT_wxUSE_EXPAT=no
- DEFAULT_wxUSE_ZLIB=no
- DEFAULT_wxUSE_LIBPNG=no
- DEFAULT_wxUSE_LIBJPEG=no
- DEFAULT_wxUSE_LIBTIFF=no
- DEFAULT_wxUSE_LIBXPM=no
- DEFAULT_wxUSE_LIBMSPACK=no
- DEFAULT_wxUSE_LIBSDL=no
- DEFAULT_wxUSE_LIBGNOMEPRINT=no
- DEFAULT_wxUSE_LIBGNOMEVFS=no
- DEFAULT_wxUSE_LIBHILDON=no
- DEFAULT_wxUSE_ODBC=no
- DEFAULT_wxUSE_OPENGL=no
-
- DEFAULT_wxUSE_ON_FATAL_EXCEPTION=no
- DEFAULT_wxUSE_STACKWALKER=no
- DEFAULT_wxUSE_DEBUGREPORT=no
- DEFAULT_wxUSE_SNGLINST_CHECKER=no
- DEFAULT_wxUSE_STD_IOSTREAM=no
- DEFAULT_wxUSE_STD_STRING=no
- DEFAULT_wxUSE_CMDLINE_PARSER=no
- DEFAULT_wxUSE_DATETIME=no
- DEFAULT_wxUSE_TIMER=no
- DEFAULT_wxUSE_STOPWATCH=no
- DEFAULT_wxUSE_FILE=no
- DEFAULT_wxUSE_FFILE=no
- DEFAULT_wxUSE_STDPATHS=no
- DEFAULT_wxUSE_TEXTBUFFER=no
- DEFAULT_wxUSE_TEXTFILE=no
- DEFAULT_wxUSE_SOUND=no
- DEFAULT_wxUSE_MEDIACTRL=no
- DEFAULT_wxUSE_GSTREAMER8=no
- DEFAULT_wxUSE_PRINTF_POS_PARAMS=no
- DEFAULT_wxUSE_INTL=no
- DEFAULT_wxUSE_CONFIG=no
- DEFAULT_wxUSE_FONTMAP=no
- DEFAULT_wxUSE_STREAMS=no
- DEFAULT_wxUSE_SOCKETS=no
- DEFAULT_wxUSE_OLE=no
- DEFAULT_wxUSE_DATAOBJ=no
- DEFAULT_wxUSE_DIALUP_MANAGER=no
- DEFAULT_wxUSE_JOYSTICK=no
- DEFAULT_wxUSE_DYNLIB_CLASS=no
- DEFAULT_wxUSE_DYNAMIC_LOADER=no
- DEFAULT_wxUSE_LONGLONG=no
- DEFAULT_wxUSE_GEOMETRY=no
-
- DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=no
- DEFAULT_wxUSE_NORMALIZED_PS_FONTS=no
- DEFAULT_wxUSE_POSTSCRIPT=no
-
- DEFAULT_wxUSE_CLIPBOARD=no
- DEFAULT_wxUSE_TOOLTIPS=no
- DEFAULT_wxUSE_DRAG_AND_DROP=no
- DEFAULT_wxUSE_DRAGIMAGE=no
- DEFAULT_wxUSE_SPLINES=no
- DEFAULT_wxUSE_MOUSEWHEEL=no
-
- DEFAULT_wxUSE_MDI=no
- DEFAULT_wxUSE_MDI_ARCHITECTURE=no
- DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE=no
- DEFAULT_wxUSE_PRINTING_ARCHITECTURE=no
-
- DEFAULT_wxUSE_CONSTRAINTS=no
- DEFAULT_wxUSE_IPC=no
- DEFAULT_wxUSE_HELP=no
- DEFAULT_wxUSE_MS_HTML_HELP=no
- DEFAULT_wxUSE_WXHTML_HELP=no
- DEFAULT_wxUSE_TREELAYOUT=no
- DEFAULT_wxUSE_METAFILE=no
- DEFAULT_wxUSE_MIMETYPE=no
- DEFAULT_wxUSE_SYSTEM_OPTIONS=no
- DEFAULT_wxUSE_PROTOCOL=no
- DEFAULT_wxUSE_PROTOCOL_HTTP=no
- DEFAULT_wxUSE_PROTOCOL_FTP=no
- DEFAULT_wxUSE_PROTOCOL_FILE=no
- DEFAULT_wxUSE_URL=no
- DEFAULT_wxUSE_VARIANT=no
-
- DEFAULT_wxUSE_ABOUTDLG=no
- DEFAULT_wxUSE_COMMONDLGS=no
- DEFAULT_wxUSE_CHOICEDLG=no
- DEFAULT_wxUSE_COLOURDLG=no
- DEFAULT_wxUSE_DIRDLG=no
- DEFAULT_wxUSE_FILEDLG=no
- DEFAULT_wxUSE_FINDREPLDLG=no
- DEFAULT_wxUSE_FONTDLG=no
- DEFAULT_wxUSE_MSGDLG=no
- DEFAULT_wxUSE_NUMBERDLG=no
- DEFAULT_wxUSE_TEXTDLG=no
- DEFAULT_wxUSE_SPLASH=no
- DEFAULT_wxUSE_STARTUP_TIPS=no
- DEFAULT_wxUSE_PROGRESSDLG=no
- DEFAULT_wxUSE_WIZARDDLG=no
-
- DEFAULT_wxUSE_MENUS=no
- DEFAULT_wxUSE_MINIFRAME=no
- DEFAULT_wxUSE_HTML=no
- DEFAULT_wxUSE_RICHTEXT=no
- DEFAULT_wxUSE_XRC=no
- DEFAULT_wxUSE_AUI=no
- DEFAULT_wxUSE_STC=no
- DEFAULT_wxUSE_WEBKIT=no
- DEFAULT_wxUSE_FILESYSTEM=no
- DEFAULT_wxUSE_FS_INET=no
- DEFAULT_wxUSE_FS_ZIP=no
- DEFAULT_wxUSE_FS_ARCHIVE=no
- DEFAULT_wxUSE_BUSYINFO=no
- DEFAULT_wxUSE_ARCHIVE_STREAMS=no
- DEFAULT_wxUSE_ZIPSTREAM=no
- DEFAULT_wxUSE_TARSTREAM=no
- DEFAULT_wxUSE_VALIDATORS=no
-
- DEFAULT_wxUSE_ACCEL=no
- DEFAULT_wxUSE_ANIMATIONCTRL=no
- DEFAULT_wxUSE_BUTTON=no
- DEFAULT_wxUSE_BMPBUTTON=no
- DEFAULT_wxUSE_BITMAPCOMBOBOX=no
- DEFAULT_wxUSE_CALCTRL=no
- DEFAULT_wxUSE_CARET=no
- DEFAULT_wxUSE_CHECKBOX=no
- DEFAULT_wxUSE_CHECKLST=no
- DEFAULT_wxUSE_CHOICE=no
- DEFAULT_wxUSE_CHOICEBOOK=no
- DEFAULT_wxUSE_COLLPANE=no
- DEFAULT_wxUSE_COLOURPICKERCTRL=no
- DEFAULT_wxUSE_COMBOBOX=no
- DEFAULT_wxUSE_COMBOCTRL=no
- DEFAULT_wxUSE_DATEPICKCTRL=no
- DEFAULT_wxUSE_DISPLAY=no
- DEFAULT_wxUSE_DETECT_SM=no
- DEFAULT_wxUSE_DIRPICKERCTRL=no
- DEFAULT_wxUSE_FILEPICKERCTRL=no
- DEFAULT_wxUSE_FONTPICKERCTRL=no
- DEFAULT_wxUSE_GAUGE=no
- DEFAULT_wxUSE_GRAPHICS_CONTEXT=no
- DEFAULT_wxUSE_GRID=no
- DEFAULT_wxUSE_HYPERLINKCTRL=no
- DEFAULT_wxUSE_DATAVIEWCTRL=no
- DEFAULT_wxUSE_IMAGLIST=no
- DEFAULT_wxUSE_LISTBOOK=no
- DEFAULT_wxUSE_LISTBOX=no
- DEFAULT_wxUSE_LISTCTRL=no
- DEFAULT_wxUSE_NOTEBOOK=no
- DEFAULT_wxUSE_ODCOMBOBOX=no
- DEFAULT_wxUSE_RADIOBOX=no
- DEFAULT_wxUSE_RADIOBTN=no
- DEFAULT_wxUSE_SASH=no
- DEFAULT_wxUSE_SCROLLBAR=no
- DEFAULT_wxUSE_SEARCHCTRL=no
- DEFAULT_wxUSE_SLIDER=no
- DEFAULT_wxUSE_SPINBTN=no
- DEFAULT_wxUSE_SPINCTRL=no
- DEFAULT_wxUSE_SPLITTER=no
- DEFAULT_wxUSE_STATBMP=no
- DEFAULT_wxUSE_STATBOX=no
- DEFAULT_wxUSE_STATLINE=no
- DEFAULT_wxUSE_STATTEXT=no
- DEFAULT_wxUSE_STATUSBAR=yes
- DEFAULT_wxUSE_TAB_DIALOG=no
- DEFAULT_wxUSE_TEXTCTRL=no
- DEFAULT_wxUSE_TOGGLEBTN=no
- DEFAULT_wxUSE_TOOLBAR=no
- DEFAULT_wxUSE_TOOLBAR_NATIVE=no
- DEFAULT_wxUSE_TREEBOOK=no
- DEFAULT_wxUSE_TOOLBOOK=no
- DEFAULT_wxUSE_TREECTRL=no
- DEFAULT_wxUSE_POPUPWIN=no
- DEFAULT_wxUSE_TIPWINDOW=no
-
- DEFAULT_wxUSE_UNICODE=no
- DEFAULT_wxUSE_UNICODE_MSLU=no
- DEFAULT_wxUSE_WCSRTOMBS=no
-
- DEFAULT_wxUSE_PALETTE=no
- DEFAULT_wxUSE_IMAGE=no
- DEFAULT_wxUSE_GIF=no
- DEFAULT_wxUSE_PCX=no
- DEFAULT_wxUSE_TGA=no
- DEFAULT_wxUSE_PNM=no
- DEFAULT_wxUSE_IFF=no
- DEFAULT_wxUSE_XPM=no
- DEFAULT_wxUSE_ICO_CUR=no
- DEFAULT_wxUSE_ACCESSIBILITY=no
-
- DEFAULT_wxUSE_MONOLITHIC=no
- DEFAULT_wxUSE_PLUGINS=no
- DEFAULT_wxUSE_OFFICIAL_BUILD=no
-else
- DEFAULT_wxUSE_UNIVERSAL=no
- DEFAULT_wxUSE_STL=no
-
- DEFAULT_wxUSE_NANOX=no
-
- DEFAULT_wxUSE_THREADS=yes
-
- DEFAULT_wxUSE_SHARED=${DEFAULT_wxUSE_SHARED:-yes}
- DEFAULT_wxUSE_OPTIMISE=yes
- DEFAULT_wxUSE_PROFILE=no
- DEFAULT_wxUSE_NO_DEPS=no
- DEFAULT_wxUSE_VARARG_MACROS=yes
- DEFAULT_wxUSE_NO_RTTI=no
- DEFAULT_wxUSE_NO_EXCEPTIONS=no
- DEFAULT_wxUSE_UNIVERSAL_BINARY=no
- DEFAULT_wxUSE_RPATH=yes
- DEFAULT_wxUSE_PERMISSIVE=no
- DEFAULT_wxUSE_DEBUG_FLAG=no
- DEFAULT_wxUSE_DEBUG_INFO=no
- DEFAULT_wxUSE_DEBUG_GDB=no
- DEFAULT_wxUSE_MEM_TRACING=no
- DEFAULT_wxUSE_DEBUG_CONTEXT=no
- DEFAULT_wxUSE_DMALLOC=no
- DEFAULT_wxUSE_APPLE_IEEE=yes
-
- DEFAULT_wxUSE_EXCEPTIONS=yes
- DEFAULT_wxUSE_LOG=yes
- DEFAULT_wxUSE_LOGWINDOW=yes
- DEFAULT_wxUSE_LOGGUI=yes
- DEFAULT_wxUSE_LOGDIALOG=yes
-
- DEFAULT_wxUSE_GUI=yes
-
- DEFAULT_wxUSE_REGEX=yes
- DEFAULT_wxUSE_XML=yes
- DEFAULT_wxUSE_EXPAT=yes
- DEFAULT_wxUSE_ZLIB=yes
- DEFAULT_wxUSE_LIBPNG=yes
- DEFAULT_wxUSE_LIBJPEG=yes
- DEFAULT_wxUSE_LIBTIFF=yes
- DEFAULT_wxUSE_LIBXPM=yes
- DEFAULT_wxUSE_LIBMSPACK=yes
- DEFAULT_wxUSE_LIBSDL=no
- DEFAULT_wxUSE_LIBGNOMEPRINT=yes
- DEFAULT_wxUSE_LIBGNOMEVFS=no
- DEFAULT_wxUSE_LIBHILDON=no
- DEFAULT_wxUSE_ODBC=no
- DEFAULT_wxUSE_OPENGL=no
-
- DEFAULT_wxUSE_ON_FATAL_EXCEPTION=yes
- DEFAULT_wxUSE_STACKWALKER=yes
- DEFAULT_wxUSE_DEBUGREPORT=yes
- DEFAULT_wxUSE_SNGLINST_CHECKER=yes
- DEFAULT_wxUSE_STD_IOSTREAM=$DEFAULT_STD_FLAG
- DEFAULT_wxUSE_STD_STRING=$DEFAULT_STD_FLAG
- DEFAULT_wxUSE_CMDLINE_PARSER=yes
- DEFAULT_wxUSE_DATETIME=yes
- DEFAULT_wxUSE_TIMER=yes
- DEFAULT_wxUSE_STOPWATCH=yes
- DEFAULT_wxUSE_FILE=yes
- DEFAULT_wxUSE_FFILE=yes
- DEFAULT_wxUSE_STDPATHS=yes
- DEFAULT_wxUSE_TEXTBUFFER=yes
- DEFAULT_wxUSE_TEXTFILE=yes
- DEFAULT_wxUSE_SOUND=yes
- DEFAULT_wxUSE_MEDIACTRL=no
- DEFAULT_wxUSE_GSTREAMER8=no
- DEFAULT_wxUSE_PRINTF_POS_PARAMS=yes
- DEFAULT_wxUSE_INTL=yes
- DEFAULT_wxUSE_CONFIG=yes
- DEFAULT_wxUSE_FONTMAP=yes
- DEFAULT_wxUSE_STREAMS=yes
- DEFAULT_wxUSE_SOCKETS=yes
- DEFAULT_wxUSE_OLE=yes
- DEFAULT_wxUSE_DATAOBJ=yes
- DEFAULT_wxUSE_DIALUP_MANAGER=yes
- DEFAULT_wxUSE_JOYSTICK=yes
- DEFAULT_wxUSE_DYNLIB_CLASS=yes
- DEFAULT_wxUSE_DYNAMIC_LOADER=yes
- DEFAULT_wxUSE_LONGLONG=yes
- DEFAULT_wxUSE_GEOMETRY=yes
-
- DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=yes
- DEFAULT_wxUSE_NORMALIZED_PS_FONTS=yes
- DEFAULT_wxUSE_POSTSCRIPT=yes
-
- DEFAULT_wxUSE_CLIPBOARD=yes
- DEFAULT_wxUSE_TOOLTIPS=yes
- DEFAULT_wxUSE_DRAG_AND_DROP=yes
- DEFAULT_wxUSE_DRAGIMAGE=yes
- DEFAULT_wxUSE_SPLINES=yes
- DEFAULT_wxUSE_MOUSEWHEEL=yes
-
- DEFAULT_wxUSE_MDI=yes
- DEFAULT_wxUSE_MDI_ARCHITECTURE=yes
- DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE=yes
- DEFAULT_wxUSE_PRINTING_ARCHITECTURE=yes
-
- DEFAULT_wxUSE_CONSTRAINTS=yes
- DEFAULT_wxUSE_IPC=yes
- DEFAULT_wxUSE_HELP=yes
- DEFAULT_wxUSE_MS_HTML_HELP=yes
- DEFAULT_wxUSE_WXHTML_HELP=yes
- DEFAULT_wxUSE_TREELAYOUT=yes
- DEFAULT_wxUSE_METAFILE=yes
- DEFAULT_wxUSE_MIMETYPE=yes
- DEFAULT_wxUSE_SYSTEM_OPTIONS=yes
- DEFAULT_wxUSE_PROTOCOL=yes
- DEFAULT_wxUSE_PROTOCOL_HTTP=yes
- DEFAULT_wxUSE_PROTOCOL_FTP=yes
- DEFAULT_wxUSE_PROTOCOL_FILE=yes
- DEFAULT_wxUSE_URL=yes
- DEFAULT_wxUSE_VARIANT=yes
-
- DEFAULT_wxUSE_ABOUTDLG=yes
- DEFAULT_wxUSE_COMMONDLGS=yes
- DEFAULT_wxUSE_CHOICEDLG=yes
- DEFAULT_wxUSE_COLOURDLG=yes
- DEFAULT_wxUSE_DIRDLG=yes
- DEFAULT_wxUSE_FILEDLG=yes
- DEFAULT_wxUSE_FINDREPLDLG=yes
- DEFAULT_wxUSE_FONTDLG=yes
- DEFAULT_wxUSE_MSGDLG=yes
- DEFAULT_wxUSE_NUMBERDLG=yes
- DEFAULT_wxUSE_TEXTDLG=yes
- DEFAULT_wxUSE_SPLASH=yes
- DEFAULT_wxUSE_STARTUP_TIPS=yes
- DEFAULT_wxUSE_PROGRESSDLG=yes
- DEFAULT_wxUSE_WIZARDDLG=yes
-
- DEFAULT_wxUSE_MENUS=yes
- DEFAULT_wxUSE_MINIFRAME=yes
- DEFAULT_wxUSE_HTML=yes
- DEFAULT_wxUSE_RICHTEXT=yes
- DEFAULT_wxUSE_XRC=yes
- DEFAULT_wxUSE_AUI=yes
- DEFAULT_wxUSE_STC=yes
- DEFAULT_wxUSE_WEBKIT=yes
- DEFAULT_wxUSE_FILESYSTEM=yes
- DEFAULT_wxUSE_FS_INET=yes
- DEFAULT_wxUSE_FS_ZIP=yes
- DEFAULT_wxUSE_FS_ARCHIVE=yes
- DEFAULT_wxUSE_BUSYINFO=yes
- DEFAULT_wxUSE_ARCHIVE_STREAMS=yes
- DEFAULT_wxUSE_ZIPSTREAM=yes
- DEFAULT_wxUSE_TARSTREAM=yes
- DEFAULT_wxUSE_VALIDATORS=yes
-
- DEFAULT_wxUSE_ACCEL=yes
- DEFAULT_wxUSE_ANIMATIONCTRL=yes
- DEFAULT_wxUSE_BUTTON=yes
- DEFAULT_wxUSE_BMPBUTTON=yes
- DEFAULT_wxUSE_BITMAPCOMBOBOX=yes
- DEFAULT_wxUSE_CALCTRL=yes
- DEFAULT_wxUSE_CARET=yes
- DEFAULT_wxUSE_CHECKBOX=yes
- DEFAULT_wxUSE_CHECKLST=yes
- DEFAULT_wxUSE_CHOICE=yes
- DEFAULT_wxUSE_CHOICEBOOK=yes
- DEFAULT_wxUSE_COLLPANE=yes
- DEFAULT_wxUSE_COLOURPICKERCTRL=yes
- DEFAULT_wxUSE_COMBOBOX=yes
- DEFAULT_wxUSE_COMBOCTRL=yes
- DEFAULT_wxUSE_DATEPICKCTRL=yes
- DEFAULT_wxUSE_DISPLAY=yes
- DEFAULT_wxUSE_DETECT_SM=yes
- DEFAULT_wxUSE_DIRPICKERCTRL=yes
- DEFAULT_wxUSE_FILEPICKERCTRL=yes
- DEFAULT_wxUSE_FONTPICKERCTRL=yes
- DEFAULT_wxUSE_GAUGE=yes
- DEFAULT_wxUSE_GRID=yes
- DEFAULT_wxUSE_GRAPHICS_CONTEXT=no
- DEFAULT_wxUSE_HYPERLINKCTRL=yes
- DEFAULT_wxUSE_DATAVIEWCTRL=no
- DEFAULT_wxUSE_IMAGLIST=yes
- DEFAULT_wxUSE_LISTBOOK=yes
- DEFAULT_wxUSE_LISTBOX=yes
- DEFAULT_wxUSE_LISTCTRL=yes
- DEFAULT_wxUSE_NOTEBOOK=yes
- DEFAULT_wxUSE_ODCOMBOBOX=yes
- DEFAULT_wxUSE_RADIOBOX=yes
- DEFAULT_wxUSE_RADIOBTN=yes
- DEFAULT_wxUSE_SASH=yes
- DEFAULT_wxUSE_SCROLLBAR=yes
- DEFAULT_wxUSE_SEARCHCTRL=yes
- DEFAULT_wxUSE_SLIDER=yes
- DEFAULT_wxUSE_SPINBTN=yes
- DEFAULT_wxUSE_SPINCTRL=yes
- DEFAULT_wxUSE_SPLITTER=yes
- DEFAULT_wxUSE_STATBMP=yes
- DEFAULT_wxUSE_STATBOX=yes
- DEFAULT_wxUSE_STATLINE=yes
- DEFAULT_wxUSE_STATTEXT=yes
- DEFAULT_wxUSE_STATUSBAR=yes
- DEFAULT_wxUSE_TAB_DIALOG=no
- DEFAULT_wxUSE_TEXTCTRL=yes
- DEFAULT_wxUSE_TOGGLEBTN=yes
- DEFAULT_wxUSE_TOOLBAR=yes
- DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
- DEFAULT_wxUSE_TREEBOOK=yes
- DEFAULT_wxUSE_TOOLBOOK=yes
- DEFAULT_wxUSE_TREECTRL=yes
- DEFAULT_wxUSE_POPUPWIN=yes
- DEFAULT_wxUSE_TIPWINDOW=yes
-
- DEFAULT_wxUSE_UNICODE=no
- DEFAULT_wxUSE_UNICODE_MSLU=yes
- DEFAULT_wxUSE_WCSRTOMBS=no
-
- DEFAULT_wxUSE_PALETTE=yes
- DEFAULT_wxUSE_IMAGE=yes
- DEFAULT_wxUSE_GIF=yes
- DEFAULT_wxUSE_PCX=yes
- DEFAULT_wxUSE_TGA=yes
- DEFAULT_wxUSE_IFF=no dnl why is this set to "no"?
- DEFAULT_wxUSE_PNM=yes
- DEFAULT_wxUSE_XPM=yes
- DEFAULT_wxUSE_ICO_CUR=yes
- DEFAULT_wxUSE_ACCESSIBILITY=no
-
- DEFAULT_wxUSE_MONOLITHIC=no
- DEFAULT_wxUSE_PLUGINS=no
- DEFAULT_wxUSE_OFFICIAL_BUILD=no
-
- dnl Applicable only when --with-gtk was used:
- DEFAULT_wxUSE_GTK2=yes
-fi
-
-
-dnl WX_ARG_WITH should be used to select whether an external package will be
-dnl used or not, to configure compile-time features of this package itself,
-dnl use WX_ARG_ENABLE instead
-
-dnl ============================
-dnl external package dependecies
-dnl ============================
-
-dnl these options use AC_ARG_WITH and not WX_ARG_WITH on purpose - we cache
-dnl these values manually
-for toolkit in `echo $ALL_TOOLKITS`; do
- LINE=`grep "wxUSE_$toolkit=" ${wx_arg_cache_file}`
- if test "x$LINE" != "x" ; then
- has_toolkit_in_cache=1
- eval "DEFAULT_$LINE"
- eval "CACHE_$toolkit=1"
-
- LINE=`grep "wx${toolkit}_VERSION=" ${wx_arg_cache_file}`
- if test "x$LINE" != "x" ; then
- eval "DEFAULT_$LINE"
- fi
- fi
-done
+dnl it's only necessary to list the options which should be disabled by
+dnl default, all the rest have default value of "yes" (or, rather, of
+dnl wxUSE_ALL_FEATURES which is the only which has to be set to "yes" by
+dnl default)
+DEFAULT_wxUSE_ALL_FEATURES=yes
+
+DEFAULT_wxUSE_STD_IOSTREAM=$DEFAULT_STD_FLAG
+DEFAULT_wxUSE_STD_STRING=$DEFAULT_STD_FLAG
+
+dnl libraries disabled by default
+DEFAULT_wxUSE_DMALLOC=no
+DEFAULT_wxUSE_LIBGNOMEVFS=no
+DEFAULT_wxUSE_LIBHILDON=no
+DEFAULT_wxUSE_LIBHILDON2=no
+DEFAULT_wxUSE_LIBMSPACK=no
+DEFAULT_wxUSE_LIBSDL=no
+
+dnl features disabled by default
+DEFAULT_wxUSE_ACCESSIBILITY=no
+DEFAULT_wxUSE_IPV6=no
+DEFAULT_wxUSE_GSTREAMER8=no
+
+dnl automatic features
+DEFAULT_wxUSE_ARTPROVIDER_TANGO=auto
+DEFAULT_wxUSE_UNICODE_UTF8=auto
+DEFAULT_wxUSE_OPENGL=auto
+DEFAULT_wxUSE_MEDIACTRL=auto
+DEFAULT_wxUSE_COMPILER_TLS=auto
+
+DEFAULT_wxUSE_UNICODE_UTF8_LOCALE=no
+
+dnl Mac/Cocoa users need to enable building universal binaries explicitly
+DEFAULT_wxUSE_UNIVERSAL_BINARY=no
+DEFAULT_wxUSE_MAC_ARCH=no
+
+DEFAULT_wxUSE_OFFICIAL_BUILD=no
+
+dnl Applicable only when --with-gtk was used:
+DEFAULT_wxUSE_GTK2=yes
+
+dnl Always default to no. Only special cases require this.
+DEFAULT_wxUSE_OBJC_UNIQUIFYING=no
+
+dnl ===========================
+dnl deal with configure options
+dnl ===========================
+
+dnl we use several macros here:
+dnl - AC_ARG_WITH/AC_ARG_ENABLE are the standard autoconf macros, see
+dnl autoconf manual for details about them
+dnl - WX_ARG_WITH/WX_ARG_ENABLE are their wx counterparts which perform
+dnl the caching of the command line options and also use DEFAULT_foo
+dnl variable as the default value for "foo" if neither --enable-foo nor
+dnl --disable-foo is specified
+dnl - WX_ARG_SYS_WITH is a special version of WX_ARG_WITH which allows
+dnl to choose not only whether an external library is used but also if we
+dnl use the copy of it included with wxWidgets or an already installed
+dnl system version
+dnl - WX_ARG_WITHOUT/WX_ARG_DISABLE mirror WX_ARG_WITH/WX_ARG_ENABLE but
+dnl should be used for the options which are enabled by default
+dnl - WX_ARG_FEATURE is a version of WX_ARG_ENABLE which should be used for
+dnl optional features, i.e. options which should be disabled if
+dnl --disable-all-features is specified (WX_ARG_WITH/WX_ARG_SYS_WITH are
+dnl also affected by this)
dnl ---------------------------------------------------------------------------
-dnl --disable-gui will build only non-GUI part of wxWidgets: check for this
-dnl first to disable many other switches if it's given
-dnl
-dnl NB: this is still in testing stage, don't use if you don't know what you're
-dnl doing
+dnl global build options
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(gui, [ --enable-gui use GUI classes], wxUSE_GUI)
+WX_ARG_DISABLE(gui, [ --disable-gui don't build GUI parts of the library], wxUSE_GUI)
WX_ARG_ENABLE(monolithic, [ --enable-monolithic build wxWidgets as single library], wxUSE_MONOLITHIC)
WX_ARG_ENABLE(plugins, [ --enable-plugins build parts of wxWidgets as loadable components], wxUSE_PLUGINS)
-WX_ARG_WITH(subdirs, [ --without-subdirs don't generate makefiles for samples/demos/...], wxWITH_SUBDIRS, without)
+WX_ARG_WITHOUT(subdirs, [ --without-subdirs don't generate makefiles for samples/demos/...], wxWITH_SUBDIRS)
+AC_ARG_WITH(flavour, [ --with-flavour=NAME specify a name to identify this build], [WX_FLAVOUR="$withval"])
+WX_ARG_ENABLE(official_build, [ --enable-official_build official build of wxWidgets (win32 DLL only)], wxUSE_OFFICIAL_BUILD)
+AC_ARG_ENABLE(vendor, [ --enable-vendor=VENDOR vendor name (win32 DLL only)], [VENDOR="$enableval"])
+if test "x$VENDOR" = "x"; then
+ VENDOR="custom"
+fi
+
+WX_ARG_DISABLE(all-features,[ --disable-all-features disable all optional features to build minimal library], wxUSE_ALL_FEATURES)
+
+if test "$wxUSE_ALL_FEATURES" = "no"; then
+ dnl this is a bit ugly but currently we have no choice but to manually
+ dnl reset all the options with default value of auto if all features are to
+ dnl be disabled because we can't have an option with default value of
+ dnl "auto-or-no-if-wxUSE_ALL_FEATURES-is-disabled"
+ DEFAULT_wxUSE_ARTPROVIDER_TANGO=no
+ DEFAULT_wxUSE_MEDIACTRL=no
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl port selection
+dnl ---------------------------------------------------------------------------
if test "$wxUSE_GUI" = "yes"; then
WX_ARG_ENABLE(universal, [ --enable-universal use wxWidgets GUI controls instead of native ones], wxUSE_UNIVERSAL)
+if test "$wxUSE_UNIVERSAL" = "yes"; then
+ AC_ARG_WITH(themes, [ --with-themes=all|list use only the specified comma-separated list of wxUniversal themes], [wxUNIV_THEMES="$withval"])
+fi
+
+dnl we use AC_ARG_WITH and not WX_ARG_WITH for the toolkit options as they
+dnl shouldn't default to wxUSE_ALL_FEATURES
AC_ARG_WITH(gtk, [[ --with-gtk[=VERSION] use GTK+, VERSION can be 2 (default), 1 or "any"]], [wxUSE_GTK="$withval" CACHE_GTK=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(motif, [ --with-motif use Motif/Lesstif], [wxUSE_MOTIF="$withval" CACHE_MOTIF=1 TOOLKIT_GIVEN=1])
-AC_ARG_WITH(mac, [ --with-mac use Mac OS X], [wxUSE_MAC="$withval" CACHE_MAC=1 TOOLKIT_GIVEN=1])
-AC_ARG_WITH(cocoa, [ --with-cocoa use Cocoa], [wxUSE_COCOA="$withval" CACHE_COCOA=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_carbon, [ --with-osx_carbon use Mac OS X (Carbon)], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_cocoa, [ --with-osx_cocoa use Mac OS X (Cocoa)], [wxUSE_OSX_COCOA="$withval" CACHE_OSX_COCOA=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_iphone, [ --with-osx_iphone use iPhone OS X port], [wxUSE_OSX_IPHONE="$withval" CACHE_OSX_IPHONE=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx, [ --with-osx use Mac OS X (default port, currently Carbon)], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(carbon, [ --with-carbon same as --with-osx_carbon], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(cocoa, [ --with-cocoa same as --with-osx_cocoa], [wxUSE_OSX_COCOA="$withval" CACHE_OSX_COCOA=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(iphone, [ --with-iphone same as --with-osx_iphone], [wxUSE_OSX_IPHONE="$withval" CACHE_OSX_IPHONE=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(mac, [ --with-mac same as --with-osx], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(old_cocoa, [ --with-old_cocoa use old, deprecated, Cocoa port], [wxUSE_OLD_COCOA="$withval" CACHE_OLD_COCOA=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(wine, [ --with-wine use Wine], [wxUSE_WINE="$withval" CACHE_WINE=1])
AC_ARG_WITH(msw, [ --with-msw use MS-Windows], [wxUSE_MSW="$withval" CACHE_MSW=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(pm, [ --with-pm use OS/2 Presentation Manager], [wxUSE_PM="$withval" CACHE_PM=1 TOOLKIT_GIVEN=1])
AC_ARG_ENABLE(gtk2, [ --disable-gtk2 use GTK+ 1.2 instead of 2.0], [wxUSE_GTK2="$enableval"])
WX_ARG_ENABLE(gpe, [ --enable-gpe use GNOME PDA Environment features if possible], wxUSE_GPE)
+dnl check that no more than one toolkit is given and that if none are given that
+dnl we have a default one
+
+AC_MSG_CHECKING(for toolkit)
+
+
+
+# In Wine, we need to default to MSW, not GTK or MOTIF
+if test "$wxUSE_WINE" = "yes"; then
+ DEFAULT_DEFAULT_wxUSE_GTK=0
+ DEFAULT_DEFAULT_wxUSE_MOTIF=0
+ DEFAULT_DEFAULT_wxUSE_MSW=1
+ wxUSE_SHARED=no
+ CC=${CC:-winegcc}
+ CXX=${CXX:-wineg++}
+fi
+
+
+if test "$wxUSE_GUI" = "yes"; then
+
+ if test "$USE_BEOS" = 1; then
+ AC_MSG_ERROR([BeOS GUI is not supported yet, use --disable-gui])
+ fi
+
+ if test "$TOOLKIT_GIVEN" = 1; then
+ dnl convert "yes", "any" or a number to 1 and "no" to 0
+ for toolkit in $ALL_TOOLKITS; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" = "xno"; then
+ eval "$var=0"
+ elif test "x$value" != "x"; then
+ eval "$var=1"
+ fi
+
+ if test "x$value" != "x" -a "x$value" != "xyes" -a "x$value" != "xno"; then
+ eval "wx${toolkit}_VERSION=$value"
+ fi
+ done
+ else
+ dnl try to guess the most apropriate toolkit for this platform
+ for toolkit in $ALL_TOOLKITS; do
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+ fi
+
+ dnl we suppose that expr is available (maybe there is a better way to do
+ dnl this? what about using ALL_TOOLKITS? TODO)
+ NUM_TOOLKITS=`expr ${wxUSE_OLD_COCOA:-0} + ${wxUSE_GTK:-0} + ${wxUSE_OSX_CARBON:-0} \
+ + ${wxUSE_OSX_COCOA:-0} + ${wxUSE_OSX_IPHONE:-0} + ${wxUSE_MGL:-0} + ${wxUSE_DFB:-0} \
+ + ${wxUSE_MICROWIN:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MSW:-0} + ${wxUSE_X11:-0}`
+
+ dnl Allow wxUSE_PM only for OS/2 with EMX.
+ case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
+ esac
+
+ case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ AC_MSG_ERROR(Please specify a toolkit -- cannot determine the default for ${host})
+ ;;
+ *)
+ AC_MSG_ERROR(Please specify at most one toolkit)
+ esac
+
+ # to be removed when --disable-gtk2 isn't needed
+ if test "x$wxUSE_GTK2" = "xyes"; then
+ wxGTK_VERSION=2
+ wxUSE_GTK1=0
+ elif test "x$wxUSE_GTK2" = "xno"; then
+ wxGTK_VERSION=1
+ wxUSE_GTK1=1
+ fi
+
+ for toolkit in $ALL_TOOLKITS; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "$value" = 1; then
+ toolkit_echo=`echo $toolkit | tr '[[A-Z]]' '[[a-z]]'`
+ AC_MSG_RESULT($toolkit_echo)
+ fi
+ done
+else
+ if test "x$host_alias" != "x"; then
+ AC_MSG_RESULT(base ($host_alias hosted) only)
+ else
+ AC_MSG_RESULT(base only)
+ fi
+fi
+
+wxUSE_MAC=0
+if test "$wxUSE_OSX_CARBON" = 1 \
+ -o "$wxUSE_OSX_COCOA" = 1 \
+ -o "$wxUSE_OSX_IPHONE" = 1; then
+ wxUSE_MAC=1
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl external libraries
+dnl ---------------------------------------------------------------------------
+
WX_ARG_SYS_WITH(libpng, [ --with-libpng use libpng (PNG image format)], wxUSE_LIBPNG)
WX_ARG_SYS_WITH(libjpeg, [ --with-libjpeg use libjpeg (JPEG file format)], wxUSE_LIBJPEG)
WX_ARG_SYS_WITH(libtiff, [ --with-libtiff use libtiff (TIFF file format)], wxUSE_LIBTIFF)
WX_ARG_SYS_WITH(libxpm, [ --with-libxpm use libxpm (XPM file format)], wxUSE_LIBXPM)
+WX_ARG_WITH(libiconv, [ --with-libiconv use libiconv (character conversion)], wxUSE_LIBICONV)
WX_ARG_WITH(libmspack, [ --with-libmspack use libmspack (CHM help files loading)], wxUSE_LIBMSPACK)
-WX_ARG_WITH(sdl, [ --with-sdl use SDL for audio on Unix], wxUSE_LIBSDL)
-WX_ARG_WITH(gnomeprint, [ --with-gnomeprint use GNOME print for printing under GNOME], wxUSE_LIBGNOMEPRINT)
+WX_ARG_WITHOUT(gtkprint, [ --without-gtkprint don't use GTK printing support], wxUSE_GTKPRINT)
+WX_ARG_WITHOUT(gnomeprint, [ --without-gnomeprint don't use GNOME printing libraries], wxUSE_LIBGNOMEPRINT)
WX_ARG_WITH(gnomevfs, [ --with-gnomevfs use GNOME VFS for associating MIME types], wxUSE_LIBGNOMEVFS)
-WX_ARG_WITH(hildon, [ --with-hildon use Hildon framework for Nokia 770], wxUSE_LIBHILDON)
+WX_ARG_WITH(hildon, [ --with-hildon use Hildon framework for Nokia 770/800/810], wxUSE_LIBHILDON)
WX_ARG_WITH(opengl, [ --with-opengl use OpenGL (or Mesa)], wxUSE_OPENGL)
-if test "$wxUSE_UNIVERSAL" = "yes"; then
- AC_ARG_WITH(themes, [ --with-themes=all|list use only the specified comma-separated list of wxUniversal themes], [wxUNIV_THEMES="$withval"])
-fi
-
fi
dnl for GUI only
WX_ARG_WITH(dmalloc, [ --with-dmalloc use dmalloc library (http://dmalloc.com/)], wxUSE_DMALLOC)
+WX_ARG_WITH(sdl, [ --with-sdl use SDL for audio on Unix], wxUSE_LIBSDL)
WX_ARG_SYS_WITH(regex, [ --with-regex enable support for wxRegEx class], wxUSE_REGEX)
WX_ARG_SYS_WITH(zlib, [ --with-zlib use zlib for LZW compression], wxUSE_ZLIB)
-WX_ARG_SYS_WITH(odbc, [ --with-odbc use the IODBC and wxODBC classes], wxUSE_ODBC)
WX_ARG_SYS_WITH(expat, [ --with-expat enable XML support using expat parser], wxUSE_EXPAT)
+AC_MSG_CHECKING([for --with-macosx-sdk])
+AC_ARG_WITH(macosx-sdk, [ --with-macosx-sdk=PATH use an OS X SDK at PATH], [
+ wxUSE_MACOSX_SDK=$withval
+ wx_cv_use_macosx_sdk="wxUSE_MACOSX_SDK=$withval"
+ ])
+AC_MSG_RESULT([$wxUSE_MACOSX_SDK])
+
+AC_MSG_CHECKING([for --with-macosx-version-min])
+AC_ARG_WITH(macosx-version-min, [ --with-macosx-version-min=VER build binaries which require at least this OS X version], [
+ wxUSE_MACOSX_VERSION_MIN=$withval
+ wx_cv_use_macosx_version_min="wxUSE_MACOSX_VERSION_MIN=$withval"
+ ])
+AC_MSG_RESULT([$wxUSE_MACOSX_VERSION_MIN])
+
+dnl ---------------------------------------------------------------------------
+dnl debugging options
+dnl ---------------------------------------------------------------------------
+
+dnl don't use WX_ARG_ENABLE as it just gets in the way instead of helping with
+dnl this rather unusual option
+AC_MSG_CHECKING([for --enable-debug])
+AC_ARG_ENABLE(debug, [ --enable-debug build library for debugging],
+ [
+ if test "$enableval" = yes; then
+ wxUSE_DEBUG=yes
+ elif test "$enableval" = no; then
+ wxUSE_DEBUG=no
+ elif test "$enableval" = max; then
+ wxUSE_DEBUG=yes
+ WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -DwxDEBUG_LEVEL=2"
+ else
+ AC_MSG_ERROR([Invalid --enable-debug value, must be yes, no or max])
+ fi
+ ],
+ wxUSE_DEBUG=default
+)
+
+case "$wxUSE_DEBUG" in
+ yes)
+ dnl build the library for debugging: enable debugging code and generate
+ dnl the debug information for the library itself
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=yes
+
+ dnl also disable optimizations by default if --enable-debug was used
+ dnl (this can still be overridden by an explicit --enable-optimise)
+ DEFAULT_wxUSE_OPTIMISE=no
+ ;;
+
+ no)
+ dnl --disable-debug is equivalent to both --disable-debug_flag and
+ dnl --disable-debug_info
+ DEFAULT_wxUSE_DEBUG_FLAG=no
+ DEFAULT_wxUSE_DEBUG_INFO=no
+ ;;
+
+ default)
+ dnl the library is built with debugging support by default but without
+ dnl debug information as this requires much, much more disk space
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=no
+ ;;
+esac
+
+WX_ARG_DISABLE(debug_flag, [ --disable-debug_flag disable all debugging support], wxUSE_DEBUG_FLAG)
+WX_ARG_ENABLE(debug_info, [ --enable-debug_info generate debug information], wxUSE_DEBUG_INFO)
+
+dnl enabled if just --enable-debug_{flag,info} was
+dnl
+dnl in any case, only set the default value and allow overriding it with an
+
+WX_ARG_ENABLE(debug_gdb, [ --enable-debug_gdb create code with extra GDB debugging information], wxUSE_DEBUG_GDB)
+WX_ARG_ENABLE(debug_cntxt, [ --enable-debug_cntxt obsolete, don't use: use wxDebugContext], wxUSE_DEBUG_CONTEXT)
+WX_ARG_ENABLE(mem_tracing, [ --enable-mem_tracing obsolete, don't use: create code with memory tracing], wxUSE_MEM_TRACING)
+
dnl ---------------------------------------------------------------------------
-dnl compile options
+dnl global compile options
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(shared, [ --enable-shared create shared library code], wxUSE_SHARED)
-WX_ARG_ENABLE(optimise, [ --enable-optimise create optimised code], wxUSE_OPTIMISE)
-WX_ARG_ENABLE(debug, [ --enable-debug same as debug_flag and debug_info], wxUSE_DEBUG)
+WX_ARG_DISABLE(shared, [ --disable-shared create static library instead of shared], wxUSE_SHARED)
WX_ARG_ENABLE(stl, [ --enable-stl use STL for containers], wxUSE_STL)
-if test "$USE_OS2" = "1"; then
+WX_ARG_ENABLE(std_iostreams, [ --enable-std_iostreams use standard C++ stream classes], wxUSE_STD_IOSTREAM)
+WX_ARG_ENABLE(std_string, [ --enable-std_string use standard C++ string classes], wxUSE_STD_STRING)
+WX_ARG_DISABLE(unicode, [ --disable-unicode compile without Unicode support], wxUSE_UNICODE)
+WX_ARG_ENABLE(mslu, [ --enable-mslu use MS Layer for Unicode on Windows 9x (Win32 only)], wxUSE_UNICODE_MSLU)
+WX_ARG_ENABLE_PARAM(utf8, [ --enable-utf8 use UTF-8 representation for strings (Unix only)], wxUSE_UNICODE_UTF8)
+WX_ARG_ENABLE(utf8only, [ --enable-utf8only only support UTF-8 locales in UTF-8 build (Unix only)], wxUSE_UNICODE_UTF8_LOCALE)
+WX_ARG_ENABLE(extended_rtti, [ --enable-extended_rtti use extended RTTI (XTI)], wxUSE_EXTENDED_RTTI)
+if test "$USE_OS2" = 1; then
DEFAULT_wxUSE_OMF=no
WX_ARG_ENABLE(omf, [ --enable-omf use OMF object format], wxUSE_OMF)
fi
-if test "$wxUSE_DEBUG" = "yes"; then
- DEFAULT_wxUSE_DEBUG_FLAG=yes
- DEFAULT_wxUSE_DEBUG_INFO=yes
- BUILD=debug
-elif test "$wxUSE_DEBUG" = "no"; then
- DEFAULT_wxUSE_DEBUG_FLAG=no
- DEFAULT_wxUSE_DEBUG_INFO=no
- BUILD=release
-fi
+WX_ARG_DISABLE(optimise, [ --disable-optimise compile without optimisations], wxUSE_OPTIMISE)
-WX_ARG_ENABLE(debug_flag, [ --enable-debug_flag set __WXDEBUG__ flag (recommended for developers!)], wxUSE_DEBUG_FLAG)
-WX_ARG_ENABLE(debug_info, [ --enable-debug_info create code with debugging information], wxUSE_DEBUG_INFO)
-WX_ARG_ENABLE(debug_gdb, [ --enable-debug_gdb create code with extra GDB debugging information], wxUSE_DEBUG_GDB)
-WX_ARG_ENABLE(debug_cntxt, [ --enable-debug_cntxt use wxDebugContext], wxUSE_DEBUG_CONTEXT)
-WX_ARG_ENABLE(mem_tracing, [ --enable-mem_tracing create code with memory tracing], wxUSE_MEM_TRACING)
WX_ARG_ENABLE(profile, [ --enable-profile create code with profiling information], wxUSE_PROFILE)
WX_ARG_ENABLE(no_rtti, [ --enable-no_rtti create code without RTTI information], wxUSE_NO_RTTI)
WX_ARG_ENABLE(no_exceptions, [ --enable-no_exceptions create code without C++ exceptions handling], wxUSE_NO_EXCEPTIONS)
WX_ARG_ENABLE(permissive, [ --enable-permissive compile code disregarding strict ANSI], wxUSE_PERMISSIVE)
WX_ARG_ENABLE(no_deps, [ --enable-no_deps create code without dependency information], wxUSE_NO_DEPS)
-WX_ARG_ENABLE(vararg_macros, [ --disable-vararg_macros don't use vararg macros, even if they are supported], wxUSE_VARARG_MACROS)
-WX_ARG_ENABLE_PARAM(universal_binary, [[ --enable-universal_binary[=SDK] create Mac PowerPC and Intel Universal binary (not yet working)]], wxUSE_UNIVERSAL_BINARY)
+WX_ARG_DISABLE(vararg_macros,[ --disable-vararg_macros don't use vararg macros, even if they are supported], wxUSE_VARARG_MACROS)
-WX_ARG_ENABLE(compat26, [ --enable-compat26 enable wxWidgets 2.6 compatibility], WXWIN_COMPATIBILITY_2_6, enable)
-WX_ARG_ENABLE(compat28, [ --disable-compat28 disable wxWidgets 2.8 compatibility], WXWIN_COMPATIBILITY_2_8, disable)
+WX_ARG_ENABLE_PARAM(universal_binary, [[ --enable-universal_binary create universal binary with Mac PPC and i386 (and x86_64 if using Cocoa) architectures ]], wxUSE_UNIVERSAL_BINARY)
+WX_ARG_ENABLE_PARAM(macosx_arch, [[ --enable-macosx_arch=ARCH build for just the specified architecture]], wxUSE_MAC_ARCH)
-WX_ARG_ENABLE(rpath, [ --disable-rpath disable use of rpath for uninstalled builds], wxUSE_RPATH)
+WX_ARG_ENABLE(compat26, [ --enable-compat26 enable wxWidgets 2.6 compatibility], WXWIN_COMPATIBILITY_2_6)
+WX_ARG_DISABLE(compat28, [ --disable-compat28 disable wxWidgets 2.8 compatibility], WXWIN_COMPATIBILITY_2_8)
+WX_ARG_DISABLE(rpath, [ --disable-rpath disable use of rpath for uninstalled builds], wxUSE_RPATH)
-dnl ---------------------------------------------------------------------------
-dnl (small) optional non GUI classes
-dnl ---------------------------------------------------------------------------
+WX_ARG_ENABLE(objc_uniquifying,[ --enable-objc_uniquifying enable Objective-C class name uniquifying], wxUSE_OBJC_UNIQUIFYING)
-WX_ARG_ENABLE(intl, [ --enable-intl use internationalization system], wxUSE_INTL)
-WX_ARG_ENABLE(config, [ --enable-config use wxConfig (and derived) classes], wxUSE_CONFIG)
+WX_ARG_DISABLE(visibility, [ --disable-visibility disable use of ELF symbols visibility even if supported], wxUSE_VISIBILITY)
+WX_ARG_DISABLE(tls, [ --disable-tls disable use of compiler TLS support], wxUSE_COMPILER_TLS)
-WX_ARG_ENABLE(protocols, [ --enable-protocols use wxProtocol and derived classes], wxUSE_PROTOCOL)
-WX_ARG_ENABLE(ftp, [ --enable-ftp use wxFTP (requires wxProtocol], wxUSE_PROTOCOL_FTP)
-WX_ARG_ENABLE(http, [ --enable-http use wxHTTP (requires wxProtocol], wxUSE_PROTOCOL_HTTP)
-WX_ARG_ENABLE(fileproto, [ --enable-fileproto use wxFileProto class (requires wxProtocol], wxUSE_PROTOCOL_FILE)
-WX_ARG_ENABLE(sockets, [ --enable-sockets use socket/network classes], wxUSE_SOCKETS)
-WX_ARG_ENABLE(ole, [ --enable-ole use OLE classes (Win32 only)], wxUSE_OLE)
-WX_ARG_ENABLE(dataobj, [ --enable-dataobj use data object classes], wxUSE_DATAOBJ)
+dnl ---------------------------------------------------------------------------
+dnl optional non GUI features
+dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(ipc, [ --enable-ipc use interprocess communication (wxSocket etc.)], wxUSE_IPC)
+WX_ARG_FEATURE(intl, [ --enable-intl use internationalization system], wxUSE_INTL)
+WX_ARG_FEATURE(xlocale, [ --enable-xlocale use x-locale support (requires wxLocale)], wxUSE_XLOCALE)
+WX_ARG_FEATURE(config, [ --enable-config use wxConfig (and derived) classes], wxUSE_CONFIG)
-dnl please keep the settings below in alphabetical order
-WX_ARG_ENABLE(apple_ieee, [ --enable-apple_ieee use the Apple IEEE codec], wxUSE_APPLE_IEEE)
-WX_ARG_ENABLE(arcstream, [ --enable-arcstream use wxArchive streams], wxUSE_ARCHIVE_STREAMS)
-WX_ARG_ENABLE(backtrace, [ --enable-backtrace use wxStackWalker class for getting backtraces], wxUSE_STACKWALKER)
-WX_ARG_ENABLE(catch_segvs, [ --enable-catch_segvs catch signals in wxApp::OnFatalException (Unix only)], wxUSE_ON_FATAL_EXCEPTION)
-WX_ARG_ENABLE(cmdline, [ --enable-cmdline use wxCmdLineParser class], wxUSE_CMDLINE_PARSER)
-WX_ARG_ENABLE(datetime, [ --enable-datetime use wxDateTime class], wxUSE_DATETIME)
-WX_ARG_ENABLE(debugreport, [ --enable-debugreport use wxDebugReport class], wxUSE_DEBUGREPORT)
-WX_ARG_ENABLE(dialupman, [ --enable-dialupman use dialup network classes], wxUSE_DIALUP_MANAGER)
-WX_ARG_ENABLE(dynlib, [ --enable-dynlib use wxLibrary class for DLL loading], wxUSE_DYNLIB_CLASS)
-WX_ARG_ENABLE(dynamicloader, [ --enable-dynamicloader use (new) wxDynamicLibrary class], wxUSE_DYNAMIC_LOADER)
-WX_ARG_ENABLE(exceptions, [ --enable-exceptions build exception-safe library], wxUSE_EXCEPTIONS)
-WX_ARG_ENABLE(ffile, [ --enable-ffile use wxFFile class], wxUSE_FFILE)
-WX_ARG_ENABLE(file, [ --enable-file use wxFile class], wxUSE_FILE)
-WX_ARG_ENABLE(filesystem, [ --enable-filesystem use virtual file systems classes], wxUSE_FILESYSTEM)
-WX_ARG_ENABLE(fontmap, [ --enable-fontmap use font encodings conversion classes], wxUSE_FONTMAP)
-WX_ARG_ENABLE(fs_archive, [ --enable-fs_archive use virtual archive filesystems], wxUSE_FS_ARCHIVE)
-WX_ARG_ENABLE(fs_inet, [ --enable-fs_inet use virtual HTTP/FTP filesystems], wxUSE_FS_INET)
-WX_ARG_ENABLE(fs_zip, [ --enable-fs_zip now replaced by fs_archive], wxUSE_FS_ZIP)
-WX_ARG_ENABLE(geometry, [ --enable-geometry use geometry class], wxUSE_GEOMETRY)
-WX_ARG_ENABLE(log, [ --enable-log use logging system], wxUSE_LOG)
-WX_ARG_ENABLE(longlong, [ --enable-longlong use wxLongLong class], wxUSE_LONGLONG)
-WX_ARG_ENABLE(mimetype, [ --enable-mimetype use wxMimeTypesManager], wxUSE_MIMETYPE)
-WX_ARG_ENABLE(mslu, [ --enable-mslu use MS Layer for Unicode on Windows 9x (Win32 only)], wxUSE_UNICODE_MSLU)
-WX_ARG_ENABLE(snglinst, [ --enable-snglinst use wxSingleInstanceChecker class], wxUSE_SNGLINST_CHECKER)
-WX_ARG_ENABLE(std_iostreams, [ --enable-std_iostreams use standard C++ stream classes], wxUSE_STD_IOSTREAM)
-WX_ARG_ENABLE(std_string, [ --enable-std_string use standard C++ string classes], wxUSE_STD_STRING)
-WX_ARG_ENABLE(stdpaths, [ --enable-stdpaths use wxStandardPaths class], wxUSE_STDPATHS)
-WX_ARG_ENABLE(stopwatch, [ --enable-stopwatch use wxStopWatch class], wxUSE_STOPWATCH)
-WX_ARG_ENABLE(streams, [ --enable-streams use wxStream etc classes], wxUSE_STREAMS)
-WX_ARG_ENABLE(system_options,[ --enable-sysoptions use wxSystemOptions], wxUSE_SYSTEM_OPTIONS)
-WX_ARG_ENABLE(tarstream, [ --enable-tarstream use wxTar streams], wxUSE_TARSTREAM)
-WX_ARG_ENABLE(textbuf, [ --enable-textbuf use wxTextBuffer class], wxUSE_TEXTBUFFER)
-WX_ARG_ENABLE(textfile, [ --enable-textfile use wxTextFile class], wxUSE_TEXTFILE)
-WX_ARG_ENABLE(timer, [ --enable-timer use wxTimer class], wxUSE_TIMER)
-WX_ARG_ENABLE(unicode, [ --enable-unicode compile wxString with Unicode support], wxUSE_UNICODE)
-WX_ARG_ENABLE(sound, [ --enable-sound use wxSound class], wxUSE_SOUND)
-WX_ARG_ENABLE(mediactrl, [ --enable-mediactrl use wxMediaCtrl class], wxUSE_MEDIACTRL)
-WX_ARG_ENABLE(gstreamer8, [ --enable-gstreamer8 force GStreamer 0.8 instead of 0.10 with the wxMediaCtrl class on unix], wxUSE_GSTREAMER8)
-WX_ARG_ENABLE(printfposparam,[ --enable-printfposparam use wxVsnprintf() which supports positional parameters], wxUSE_PRINTF_POS_PARAMS)
-WX_ARG_ENABLE(zipstream, [ --enable-zipstream use wxZip streams], wxUSE_ZIPSTREAM)
-
-WX_ARG_ENABLE(url, [ --enable-url use wxURL class], wxUSE_URL)
-WX_ARG_ENABLE(variant, [ --enable-variant use wxVariant class], wxUSE_VARIANT)
-WX_ARG_ENABLE(protocol, [ --enable-protocol use wxProtocol class], wxUSE_PROTOCOL)
-WX_ARG_ENABLE(protocol_http, [ --enable-protocol-http HTTP support in wxProtocol], wxUSE_PROTOCOL_HTTP)
-WX_ARG_ENABLE(protocol_ftp, [ --enable-protocol-ftp FTP support in wxProtocol], wxUSE_PROTOCOL_FTP)
-WX_ARG_ENABLE(protocol_file, [ --enable-protocol-file FILE support in wxProtocol], wxUSE_PROTOCOL_FILE)
+WX_ARG_FEATURE(protocols, [ --enable-protocols use wxProtocol and derived classes], wxUSE_PROTOCOL)
+WX_ARG_FEATURE(ftp, [ --enable-ftp use wxFTP (requires wxProtocol], wxUSE_PROTOCOL_FTP)
+WX_ARG_FEATURE(http, [ --enable-http use wxHTTP (requires wxProtocol], wxUSE_PROTOCOL_HTTP)
+WX_ARG_FEATURE(fileproto, [ --enable-fileproto use wxFileProto class (requires wxProtocol], wxUSE_PROTOCOL_FILE)
+WX_ARG_FEATURE(sockets, [ --enable-sockets use socket/network classes], wxUSE_SOCKETS)
+WX_ARG_FEATURE(ipv6, [ --enable-ipv6 enable IPv6 support in wxSocket], wxUSE_IPV6)
+WX_ARG_FEATURE(ole, [ --enable-ole use OLE classes (Win32 only)], wxUSE_OLE)
+WX_ARG_FEATURE(dataobj, [ --enable-dataobj use data object classes], wxUSE_DATAOBJ)
+WX_ARG_FEATURE(ipc, [ --enable-ipc use interprocess communication (wxSocket etc.)], wxUSE_IPC)
-dnl ---------------------------------------------------------------------------
-dnl "big" options (i.e. those which change a lot of things throughout the library)
-dnl ---------------------------------------------------------------------------
+WX_ARG_FEATURE(baseevtloop, [ --enable-baseevtloop use event loop in console programs too], wxUSE_CONSOLE_EVENTLOOP)
+WX_ARG_FEATURE(epollloop, [ --enable-epollloop use wxEpollDispatcher class (Linux only)], wxUSE_EPOLL_DISPATCHER)
+WX_ARG_FEATURE(selectloop, [ --enable-selectloop use wxSelectDispatcher class], wxUSE_SELECT_DISPATCHER)
-WX_ARG_ENABLE(threads, [ --enable-threads use threads], wxUSE_THREADS)
+dnl please keep the settings below in alphabetical order
+WX_ARG_FEATURE(any, [ --enable-any use wxAny class], wxUSE_ANY)
+WX_ARG_FEATURE(apple_ieee, [ --enable-apple_ieee use the Apple IEEE codec], wxUSE_APPLE_IEEE)
+WX_ARG_FEATURE(arcstream, [ --enable-arcstream use wxArchive streams], wxUSE_ARCHIVE_STREAMS)
+WX_ARG_FEATURE(base64, [ --enable-base64 use base64 encoding/decoding functions], wxUSE_BASE64)
+WX_ARG_FEATURE(backtrace, [ --enable-backtrace use wxStackWalker class for getting backtraces], wxUSE_STACKWALKER)
+WX_ARG_FEATURE(catch_segvs, [ --enable-catch_segvs catch signals in wxApp::OnFatalException (Unix only)], wxUSE_ON_FATAL_EXCEPTION)
+WX_ARG_FEATURE(cmdline, [ --enable-cmdline use wxCmdLineParser class], wxUSE_CMDLINE_PARSER)
+WX_ARG_FEATURE(datetime, [ --enable-datetime use wxDateTime class], wxUSE_DATETIME)
+WX_ARG_FEATURE(debugreport, [ --enable-debugreport use wxDebugReport class], wxUSE_DEBUGREPORT)
+WX_ARG_FEATURE(dialupman, [ --enable-dialupman use dialup network classes], wxUSE_DIALUP_MANAGER)
+WX_ARG_FEATURE(dynlib, [ --enable-dynlib use wxLibrary class for DLL loading], wxUSE_DYNLIB_CLASS)
+WX_ARG_FEATURE(dynamicloader, [ --enable-dynamicloader use (new) wxDynamicLibrary class], wxUSE_DYNAMIC_LOADER)
+WX_ARG_FEATURE(exceptions, [ --enable-exceptions build exception-safe library], wxUSE_EXCEPTIONS)
+WX_ARG_FEATURE(ffile, [ --enable-ffile use wxFFile class], wxUSE_FFILE)
+WX_ARG_FEATURE(file, [ --enable-file use wxFile class], wxUSE_FILE)
+WX_ARG_FEATURE(filehistory, [ --enable-filehistory use wxFileHistory class], wxUSE_FILE_HISTORY)
+WX_ARG_FEATURE(filesystem, [ --enable-filesystem use virtual file systems classes], wxUSE_FILESYSTEM)
+WX_ARG_FEATURE(fontenum, [ --enable-fontenum use wxFontEnumerator class], wxUSE_FONTENUM)
+WX_ARG_FEATURE(fontmap, [ --enable-fontmap use font encodings conversion classes], wxUSE_FONTMAP)
+WX_ARG_FEATURE(fs_archive, [ --enable-fs_archive use virtual archive filesystems], wxUSE_FS_ARCHIVE)
+WX_ARG_FEATURE(fs_inet, [ --enable-fs_inet use virtual HTTP/FTP filesystems], wxUSE_FS_INET)
+WX_ARG_FEATURE(fs_zip, [ --enable-fs_zip now replaced by fs_archive], wxUSE_FS_ZIP)
+WX_ARG_FEATURE(fswatcher, [ --enable-fswatcher use wxFileSystemWatcher class], wxUSE_FSWATCHER)
+WX_ARG_FEATURE(geometry, [ --enable-geometry use geometry class], wxUSE_GEOMETRY)
+WX_ARG_FEATURE(log, [ --enable-log use logging system], wxUSE_LOG)
+WX_ARG_FEATURE(longlong, [ --enable-longlong use wxLongLong class], wxUSE_LONGLONG)
+WX_ARG_FEATURE(mimetype, [ --enable-mimetype use wxMimeTypesManager], wxUSE_MIMETYPE)
+WX_ARG_FEATURE(printfposparam,[ --enable-printfposparam use wxVsnprintf() which supports positional parameters], wxUSE_PRINTF_POS_PARAMS)
+WX_ARG_FEATURE(snglinst, [ --enable-snglinst use wxSingleInstanceChecker class], wxUSE_SNGLINST_CHECKER)
+WX_ARG_FEATURE(sound, [ --enable-sound use wxSound class], wxUSE_SOUND)
+WX_ARG_FEATURE(stdpaths, [ --enable-stdpaths use wxStandardPaths class], wxUSE_STDPATHS)
+WX_ARG_FEATURE(stopwatch, [ --enable-stopwatch use wxStopWatch class], wxUSE_STOPWATCH)
+WX_ARG_FEATURE(streams, [ --enable-streams use wxStream etc classes], wxUSE_STREAMS)
+WX_ARG_FEATURE(sysoptions, [ --enable-sysoptions use wxSystemOptions], wxUSE_SYSTEM_OPTIONS)
+WX_ARG_FEATURE(tarstream, [ --enable-tarstream use wxTar streams], wxUSE_TARSTREAM)
+WX_ARG_FEATURE(textbuf, [ --enable-textbuf use wxTextBuffer class], wxUSE_TEXTBUFFER)
+WX_ARG_FEATURE(textfile, [ --enable-textfile use wxTextFile class], wxUSE_TEXTFILE)
+WX_ARG_FEATURE(timer, [ --enable-timer use wxTimer class], wxUSE_TIMER)
+WX_ARG_FEATURE(variant, [ --enable-variant use wxVariant class], wxUSE_VARIANT)
+WX_ARG_FEATURE(zipstream, [ --enable-zipstream use wxZip streams], wxUSE_ZIPSTREAM)
+
+dnl URL-related classes
+WX_ARG_FEATURE(url, [ --enable-url use wxURL class], wxUSE_URL)
+WX_ARG_FEATURE(protocol, [ --enable-protocol use wxProtocol class], wxUSE_PROTOCOL)
+WX_ARG_FEATURE(protocol_http, [ --enable-protocol-http HTTP support in wxProtocol], wxUSE_PROTOCOL_HTTP)
+WX_ARG_FEATURE(protocol_ftp, [ --enable-protocol-ftp FTP support in wxProtocol], wxUSE_PROTOCOL_FTP)
+WX_ARG_FEATURE(protocol_file, [ --enable-protocol-file FILE support in wxProtocol], wxUSE_PROTOCOL_FILE)
+
+WX_ARG_FEATURE(threads, [ --enable-threads use threads], wxUSE_THREADS)
+
+WX_ARG_ENABLE(iniconf, [ --enable-iniconf use wxIniConfig (Win32 only)], wxUSE_INICONF)
+WX_ARG_FEATURE(regkey, [ --enable-regkey use wxRegKey class (Win32 only)], wxUSE_REGKEY)
if test "$wxUSE_GUI" = "yes"; then
dnl ---------------------------------------------------------------------------
-dnl "big" GUI options
-dnl ---------------------------------------------------------------------------
-
-WX_ARG_ENABLE(docview, [ --enable-docview use document view architecture], wxUSE_DOC_VIEW_ARCHITECTURE)
-WX_ARG_ENABLE(help, [ --enable-help use help subsystem], wxUSE_HELP)
-WX_ARG_ENABLE(mshtmlhelp, [ --enable-mshtmlhelp use MS HTML Help (win32)], wxUSE_MS_HTML_HELP)
-WX_ARG_ENABLE(html, [ --enable-html use wxHTML sub-library], wxUSE_HTML)
-WX_ARG_ENABLE(htmlhelp, [ --enable-htmlhelp use wxHTML-based help], wxUSE_WXHTML_HELP)
-WX_ARG_ENABLE(xrc, [ --enable-xrc use XRC resources sub-library], wxUSE_XRC)
-WX_ARG_ENABLE(aui, [ --enable-aui use AUI docking library], wxUSE_AUI)
-WX_ARG_ENABLE(stc, [ --enable-stc use wxStyledTextCtrl library], wxUSE_STC)
-WX_ARG_ENABLE(constraints, [ --enable-constraints use layout-constraints system], wxUSE_CONSTRAINTS)
-WX_ARG_ENABLE(printarch, [ --enable-printarch use printing architecture], wxUSE_PRINTING_ARCHITECTURE)
-WX_ARG_ENABLE(mdi, [ --enable-mdi use multiple document interface architecture], wxUSE_MDI)
-WX_ARG_ENABLE(mdidoc, [ --enable-mdidoc use docview architecture with MDI], wxUSE_MDI_ARCHITECTURE)
-WX_ARG_ENABLE(loggui, [ --enable-loggui use standard GUI logger], wxUSE_LOGGUI)
-WX_ARG_ENABLE(logwin, [ --enable-logwin use wxLogWindow], wxUSE_LOGWINDOW)
-WX_ARG_ENABLE(logdialog, [ --enable-logdialog use wxLogDialog], wxUSE_LOGDIALOG)
-WX_ARG_ENABLE(webkit, [ --enable-webkit use wxWebKitCtrl (Mac)], wxUSE_WEBKIT)
-WX_ARG_ENABLE(richtext, [ --enable-richtext use wxRichTextCtrl], wxUSE_RICHTEXT)
-WX_ARG_ENABLE(graphics_ctx, [ --enable-graphics_ctx use graphics context 2D drawing API], wxUSE_GRAPHICS_CONTEXT)
-
-dnl ---------------------------------------------------------------------------
-dnl PostScript options
+dnl optional "big" GUI features
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(postscript, [ --enable-postscript use wxPostscriptDC device context (default for gtk+)], wxUSE_POSTSCRIPT)
-dnl VZ: these options seem to be always on, if someone wants to change it please do
-dnl WX_ARG_ENABLE(PS-normalized, [ --enable-PS-normalized use normalized PS fonts], dnl wxUSE_NORMALIZED_PS_FONTS)
-dnl WX_ARG_ENABLE(afmfonts, [ --enable-afmfonts use Adobe Font Metric Font table], dnl wxUSE_AFM_FOR_POSTSCRIPT)
+WX_ARG_FEATURE(docview, [ --enable-docview use document view architecture], wxUSE_DOC_VIEW_ARCHITECTURE)
+WX_ARG_FEATURE(help, [ --enable-help use help subsystem], wxUSE_HELP)
+WX_ARG_FEATURE(mshtmlhelp, [ --enable-mshtmlhelp use MS HTML Help (win32)], wxUSE_MS_HTML_HELP)
+WX_ARG_FEATURE(html, [ --enable-html use wxHTML sub-library], wxUSE_HTML)
+WX_ARG_FEATURE(htmlhelp, [ --enable-htmlhelp use wxHTML-based help], wxUSE_WXHTML_HELP)
+WX_ARG_FEATURE(xrc, [ --enable-xrc use XRC resources sub-library], wxUSE_XRC)
+WX_ARG_FEATURE(aui, [ --enable-aui use AUI docking library], wxUSE_AUI)
+WX_ARG_FEATURE(propgrid, [ --enable-propgrid use wxPropertyGrid library], wxUSE_PROPGRID)
+WX_ARG_FEATURE(ribbon, [ --enable-ribbon use wxRibbon library], wxUSE_RIBBON)
+WX_ARG_FEATURE(stc, [ --enable-stc use wxStyledTextCtrl library], wxUSE_STC)
+WX_ARG_FEATURE(constraints, [ --enable-constraints use layout-constraints system], wxUSE_CONSTRAINTS)
+WX_ARG_FEATURE(loggui, [ --enable-loggui use standard GUI logger], wxUSE_LOGGUI)
+WX_ARG_FEATURE(logwin, [ --enable-logwin use wxLogWindow], wxUSE_LOGWINDOW)
+WX_ARG_FEATURE(logdialog, [ --enable-logdialog use wxLogDialog], wxUSE_LOGDIALOG)
+WX_ARG_FEATURE(mdi, [ --enable-mdi use multiple document interface architecture], wxUSE_MDI)
+WX_ARG_FEATURE(mdidoc, [ --enable-mdidoc use docview architecture with MDI], wxUSE_MDI_ARCHITECTURE)
+WX_ARG_FEATURE(mediactrl, [ --enable-mediactrl use wxMediaCtrl class], wxUSE_MEDIACTRL)
+WX_ARG_FEATURE(gstreamer8, [ --enable-gstreamer8 force GStreamer 0.8 instead of 0.10 with the wxMediaCtrl class on unix], wxUSE_GSTREAMER8)
+WX_ARG_FEATURE(webkit, [ --enable-webkit use wxWebKitCtrl (Mac)], wxUSE_WEBKIT)
+WX_ARG_FEATURE(richtext, [ --enable-richtext use wxRichTextCtrl], wxUSE_RICHTEXT)
+WX_ARG_FEATURE(postscript, [ --enable-postscript use wxPostscriptDC device context (default for gtk+)], wxUSE_POSTSCRIPT)
+WX_ARG_FEATURE(printarch, [ --enable-printarch use printing architecture], wxUSE_PRINTING_ARCHITECTURE)
+WX_ARG_FEATURE(svg, [ --enable-svg use wxSVGFileDC device context], wxUSE_SVG)
+
+dnl wxDC is implemented in terms of wxGraphicsContext in wxOSX so the latter
+dnl can't be disabled, don't even provide an option to do it
+if test "$wxUSE_MAC" != 1; then
+WX_ARG_FEATURE(graphics_ctx,[ --enable-graphics_ctx use graphics context 2D drawing API], wxUSE_GRAPHICS_CONTEXT)
+fi
dnl ---------------------------------------------------------------------------
dnl IPC &c
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(clipboard, [ --enable-clipboard use wxClipboard class], wxUSE_CLIPBOARD)
-WX_ARG_ENABLE(dnd, [ --enable-dnd use Drag'n'Drop classes], wxUSE_DRAG_AND_DROP)
-WX_ARG_ENABLE(metafile, [ --enable-metafile use win32 metafiles], wxUSE_METAFILE)
-
-dnl WX_ARG_ENABLE(treelayout, [ --enable-treelayout use wxTreeLayout class], wxUSE_TREELAYOUT)
+WX_ARG_FEATURE(clipboard, [ --enable-clipboard use wxClipboard class], wxUSE_CLIPBOARD)
+WX_ARG_FEATURE(dnd, [ --enable-dnd use Drag'n'Drop classes], wxUSE_DRAG_AND_DROP)
+WX_ARG_FEATURE(metafile, [ --enable-metafile use win32 metafiles], wxUSE_METAFILE)
dnl ---------------------------------------------------------------------------
dnl optional GUI controls (in alphabetical order except the first one)
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(controls, [ --enable-controls use all usual controls], wxUSE_CONTROLS)
+dnl don't set DEFAULT_wxUSE_XXX below if the option is not specified
+DEFAULT_wxUSE_CONTROLS=none
+WX_ARG_DISABLE(controls, [ --disable-controls disable compilation of all standard controls], wxUSE_CONTROLS)
+
+dnl even with --disable-controls, some may be enabled by an explicit
+dnl --enable-<control> later on the command line -- but by default all will be
+dnl disabled
+if test "$wxUSE_CONTROLS" = "no"; then
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_ANIMATIONCTRL=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_BUTTON=no
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLISTBOX=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_CHOICEBOOK=no
+ DEFAULT_wxUSE_COLLPANE=no
+ DEFAULT_wxUSE_COLOURPICKERCTRL=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_COMMANDLINKBUTTON=no
+ DEFAULT_wxUSE_DATAVIEWCTRL=no
+ DEFAULT_wxUSE_DATEPICKCTRL=no
+ DEFAULT_wxUSE_DETECT_SM=no
+ DEFAULT_wxUSE_DIRPICKERCTRL=no
+ DEFAULT_wxUSE_DISPLAY=no
+ DEFAULT_wxUSE_FILECTRL=no
+ DEFAULT_wxUSE_FILEPICKERCTRL=no
+ DEFAULT_wxUSE_FONTPICKERCTRL=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_HEADERCTRL=no
+ DEFAULT_wxUSE_HYPERLINKCTRL=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOOK=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_POPUPWIN=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_RICHMSGDLG=no
+ DEFAULT_wxUSE_REARRANGECTRL=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SEARCHCTRL=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPINCTRL=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATUSBAR=no
+ DEFAULT_wxUSE_TIPWINDOW=no
+ DEFAULT_wxUSE_TOGGLEBTN=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=no
+ DEFAULT_wxUSE_TOOLBOOK=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_TREEBOOK=no
+ DEFAULT_wxUSE_TREECTRL=no
+fi
-dnl even with --enable-controls, some may be disabled by giving
-dnl --disable-<control> later on the command line - but by default all will be
-dnl used (and vice versa)
-if test "$wxUSE_CONTROLS" = "yes"; then
- DEFAULT_wxUSE_ACCEL=yes
- DEFAULT_wxUSE_ANIMATIONCTRL=yes
- DEFAULT_wxUSE_BMPBUTTON=yes
- DEFAULT_wxUSE_BUTTON=yes
- DEFAULT_wxUSE_CALCTRL=yes
- DEFAULT_wxUSE_CARET=yes
- DEFAULT_wxUSE_COMBOBOX=yes
- DEFAULT_wxUSE_CHECKBOX=yes
- DEFAULT_wxUSE_CHECKLISTBOX=yes
- DEFAULT_wxUSE_CHOICE=yes
- DEFAULT_wxUSE_CHOICEBOOK=yes
- DEFAULT_wxUSE_COLLPANE=yes
- DEFAULT_wxUSE_COLOURPICKERCTRL=yes
- DEFAULT_wxUSE_COMBOBOX=yes
- DEFAULT_wxUSE_DATEPICKCTRL=yes
- DEFAULT_wxUSE_DISPLAY=yes
- DEFAULT_wxUSE_DETECT_SM=yes
- DEFAULT_wxUSE_DIRPICKERCTRL=yes
- DEFAULT_wxUSE_FILEPICKERCTRL=yes
- DEFAULT_wxUSE_FONTPICKERCTRL=yes
- DEFAULT_wxUSE_GAUGE=yes
- DEFAULT_wxUSE_GRID=yes
- DEFAULT_wxUSE_HYPERLINKCTRL=yes
- DEFAULT_wxUSE_DATAVIEWCTRL=no
- DEFAULT_wxUSE_IMAGLIST=yes
- DEFAULT_wxUSE_LISTBOOK=yes
- DEFAULT_wxUSE_LISTBOX=yes
- DEFAULT_wxUSE_LISTCTRL=yes
- DEFAULT_wxUSE_NOTEBOOK=yes
- DEFAULT_wxUSE_RADIOBOX=yes
- DEFAULT_wxUSE_RADIOBTN=yes
- DEFAULT_wxUSE_SASH=yes
- DEFAULT_wxUSE_SCROLLBAR=yes
- DEFAULT_wxUSE_SEARCHCTRL=yes
- DEFAULT_wxUSE_SLIDER=yes
- DEFAULT_wxUSE_SPINBTN=yes
- DEFAULT_wxUSE_SPINCTRL=yes
- DEFAULT_wxUSE_SPLITTER=yes
- DEFAULT_wxUSE_STATBMP=yes
- DEFAULT_wxUSE_STATBOX=yes
- DEFAULT_wxUSE_STATLINE=yes
- DEFAULT_wxUSE_STATUSBAR=yes
- DEFAULT_wxUSE_TAB_DIALOG=yes
- DEFAULT_wxUSE_TOGGLEBTN=yes
- DEFAULT_wxUSE_TOOLBAR=yes
- DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
- DEFAULT_wxUSE_TOOLTIPS=yes
- DEFAULT_wxUSE_TREEBOOK=yes
- DEFAULT_wxUSE_TOOLBOOK=yes
- DEFAULT_wxUSE_TREECTRL=yes
- DEFAULT_wxUSE_POPUPWIN=yes
- DEFAULT_wxUSE_TIPWINDOW=yes
-elif test "$wxUSE_CONTROLS" = "no"; then
- DEFAULT_wxUSE_ACCEL=no
- DEFAULT_wxUSE_ANIMATIONCTRL=no
- DEFAULT_wxUSE_BMPBUTTON=no
- DEFAULT_wxUSE_BUTTON=no
- DEFAULT_wxUSE_CALCTRL=no
- DEFAULT_wxUSE_CARET=no
- DEFAULT_wxUSE_COLLPANE=no
- DEFAULT_wxUSE_COMBOBOX=no
- DEFAULT_wxUSE_CHECKBOX=no
- DEFAULT_wxUSE_CHECKLISTBOX=no
- DEFAULT_wxUSE_CHOICE=no
- DEFAULT_wxUSE_CHOICEBOOK=no
- DEFAULT_wxUSE_COLOURPICKERCTRL=no
- DEFAULT_wxUSE_COMBOBOX=no
- DEFAULT_wxUSE_DATEPICKCTRL=no
- DEFAULT_wxUSE_DISPLAY=no
- DEFAULT_wxUSE_DETECT_SM=no
- DEFAULT_wxUSE_DIRPICKERCTRL=no
- DEFAULT_wxUSE_FILEPICKERCTRL=no
- DEFAULT_wxUSE_FONTPICKERCTRL=no
- DEFAULT_wxUSE_GAUGE=no
- DEFAULT_wxUSE_GRID=no
- DEFAULT_wxUSE_HYPERLINKCTRL=no
- DEFAULT_wxUSE_DATAVIEWCTRL=no
- DEFAULT_wxUSE_IMAGLIST=no
- DEFAULT_wxUSE_LISTBOOK=no
- DEFAULT_wxUSE_LISTBOX=no
- DEFAULT_wxUSE_LISTCTRL=no
- DEFAULT_wxUSE_NOTEBOOK=no
- DEFAULT_wxUSE_RADIOBOX=no
- DEFAULT_wxUSE_RADIOBTN=no
- DEFAULT_wxUSE_SASH=no
- DEFAULT_wxUSE_SCROLLBAR=no
- DEFAULT_wxUSE_SEARCHCTRL=no
- DEFAULT_wxUSE_SLIDER=no
- DEFAULT_wxUSE_SPINBTN=no
- DEFAULT_wxUSE_SPINCTRL=no
- DEFAULT_wxUSE_SPLITTER=no
- DEFAULT_wxUSE_STATBMP=no
- DEFAULT_wxUSE_STATBOX=no
- DEFAULT_wxUSE_STATLINE=no
- DEFAULT_wxUSE_STATUSBAR=no
- DEFAULT_wxUSE_TAB_DIALOG=no
- DEFAULT_wxUSE_TOGGLEBTN=no
- DEFAULT_wxUSE_TOOLBAR=no
- DEFAULT_wxUSE_TOOLBAR_NATIVE=no
- DEFAULT_wxUSE_TOOLTIPS=no
- DEFAULT_wxUSE_TREEBOOK=no
- DEFAULT_wxUSE_TOOLBOOK=no
- DEFAULT_wxUSE_TREECTRL=no
- DEFAULT_wxUSE_POPUPWIN=no
- DEFAULT_wxUSE_TIPWINDOW=no
-fi
-
-WX_ARG_ENABLE(accel, [ --enable-accel use accelerators], wxUSE_ACCEL)
-WX_ARG_ENABLE(animatectrl, [ --enable-animatectrl use wxAnimationCtrl class], wxUSE_ANIMATIONCTRL)
-WX_ARG_ENABLE(button, [ --enable-button use wxButton class], wxUSE_BUTTON)
-WX_ARG_ENABLE(bmpbutton, [ --enable-bmpbutton use wxBitmapButton class], wxUSE_BMPBUTTON)
-WX_ARG_ENABLE(bmpcombobox, [ --enable-bmpcombobox use wxBitmapComboBox class], wxUSE_BITMAPCOMBOBOX)
-WX_ARG_ENABLE(calendar, [ --enable-calendar use wxCalendarCtrl class], wxUSE_CALCTRL)
-WX_ARG_ENABLE(caret, [ --enable-caret use wxCaret class], wxUSE_CARET)
-WX_ARG_ENABLE(checkbox, [ --enable-checkbox use wxCheckBox class], wxUSE_CHECKBOX)
-WX_ARG_ENABLE(checklst, [ --enable-checklst use wxCheckListBox (listbox with checkboxes) class], wxUSE_CHECKLST)
-WX_ARG_ENABLE(choice, [ --enable-choice use wxChoice class], wxUSE_CHOICE)
-WX_ARG_ENABLE(choicebook, [ --enable-choicebook use wxChoicebook class], wxUSE_CHOICEBOOK)
-WX_ARG_ENABLE(collpane, [ --enable-collpane use wxCollapsiblePane class], wxUSE_COLLPANE)
-WX_ARG_ENABLE(colourpicker,[ --enable-colourpicker use wxColourPickerCtrl class], wxUSE_COLOURPICKERCTRL)
-WX_ARG_ENABLE(combobox, [ --enable-combobox use wxComboBox class], wxUSE_COMBOBOX)
-WX_ARG_ENABLE(comboctrl, [ --enable-comboctrl use wxComboCtrl class], wxUSE_COMBOCTRL)
-WX_ARG_ENABLE(datepick, [ --enable-datepick use wxDatePickerCtrl class], wxUSE_DATEPICKCTRL)
-WX_ARG_ENABLE(dirpicker, [ --enable-dirpicker use wxDirPickerCtrl class], wxUSE_DIRPICKERCTRL)
-WX_ARG_ENABLE(display, [ --enable-display use wxDisplay class], wxUSE_DISPLAY)
-WX_ARG_ENABLE(detect_sm, [ --enable-detect_sm use code to detect X11 session manager], wxUSE_DETECT_SM)
-WX_ARG_ENABLE(filepicker, [ --enable-filepicker use wxFilePickerCtrl class], wxUSE_FILEPICKERCTRL)
-WX_ARG_ENABLE(fontpicker, [ --enable-fontpicker use wxFontPickerCtrl class], wxUSE_FONTPICKERCTRL)
-WX_ARG_ENABLE(gauge, [ --enable-gauge use wxGauge class], wxUSE_GAUGE)
-WX_ARG_ENABLE(grid, [ --enable-grid use wxGrid class], wxUSE_GRID)
-WX_ARG_ENABLE(dataviewctrl,[ --enable-dataviewctrl use wxDataViewCtrl class], wxUSE_DATAVIEWCTRL)
-WX_ARG_ENABLE(hyperlink, [ --enable-hyperlink use wxHyperlinkCtrl class], wxUSE_HYPERLINKCTRL)
-WX_ARG_ENABLE(imaglist, [ --enable-imaglist use wxImageList class], wxUSE_IMAGLIST)
-WX_ARG_ENABLE(listbook, [ --enable-listbook use wxListbook class], wxUSE_LISTBOOK)
-WX_ARG_ENABLE(listbox, [ --enable-listbox use wxListBox class], wxUSE_LISTBOX)
-WX_ARG_ENABLE(listctrl, [ --enable-listctrl use wxListCtrl class], wxUSE_LISTCTRL)
-WX_ARG_ENABLE(notebook, [ --enable-notebook use wxNotebook class], wxUSE_NOTEBOOK)
-WX_ARG_ENABLE(odcombobox, [ --enable-odcombobox use wxOwnerDrawnComboBox class], wxUSE_ODCOMBOBOX)
-WX_ARG_ENABLE(radiobox, [ --enable-radiobox use wxRadioBox class], wxUSE_RADIOBOX)
-WX_ARG_ENABLE(radiobtn, [ --enable-radiobtn use wxRadioButton class], wxUSE_RADIOBTN)
-WX_ARG_ENABLE(sash, [ --enable-sash use wxSashWindow class], wxUSE_SASH)
-WX_ARG_ENABLE(scrollbar, [ --enable-scrollbar use wxScrollBar class and scrollable windows], wxUSE_SCROLLBAR)
-WX_ARG_ENABLE(searchctrl, [ --enable-searchctrl use wxSearchCtrl class], wxUSE_SEARCHCTRL)
-WX_ARG_ENABLE(slider, [ --enable-slider use wxSlider class], wxUSE_SLIDER)
-WX_ARG_ENABLE(spinbtn, [ --enable-spinbtn use wxSpinButton class], wxUSE_SPINBTN)
-WX_ARG_ENABLE(spinctrl, [ --enable-spinctrl use wxSpinCtrl class], wxUSE_SPINCTRL)
-WX_ARG_ENABLE(splitter, [ --enable-splitter use wxSplitterWindow class], wxUSE_SPLITTER)
-WX_ARG_ENABLE(statbmp, [ --enable-statbmp use wxStaticBitmap class], wxUSE_STATBMP)
-WX_ARG_ENABLE(statbox, [ --enable-statbox use wxStaticBox class], wxUSE_STATBOX)
-WX_ARG_ENABLE(statline, [ --enable-statline use wxStaticLine class], wxUSE_STATLINE)
-WX_ARG_ENABLE(stattext, [ --enable-stattext use wxStaticText class], wxUSE_STATTEXT)
-WX_ARG_ENABLE(statusbar, [ --enable-statusbar use wxStatusBar class], wxUSE_STATUSBAR)
-WX_ARG_ENABLE(tabdialog, [ --enable-tabdialog use wxTabControl class], wxUSE_TAB_DIALOG)
-WX_ARG_ENABLE(textctrl, [ --enable-textctrl use wxTextCtrl class], wxUSE_TEXTCTRL)
-WX_ARG_ENABLE(togglebtn, [ --enable-togglebtn use wxToggleButton class], wxUSE_TOGGLEBTN)
-WX_ARG_ENABLE(toolbar, [ --enable-toolbar use wxToolBar class], wxUSE_TOOLBAR)
-WX_ARG_ENABLE(tbarnative, [ --enable-tbarnative use native wxToolBar class], wxUSE_TOOLBAR_NATIVE)
-WX_ARG_ENABLE(treebook, [ --enable-treebook use wxTreebook class], wxUSE_TREEBOOK)
-WX_ARG_ENABLE(toolbook, [ --enable-toolbook use wxToolbook class], wxUSE_TOOLBOOK)
-WX_ARG_ENABLE(treectrl, [ --enable-treectrl use wxTreeCtrl class], wxUSE_TREECTRL)
-WX_ARG_ENABLE(tipwindow, [ --enable-tipwindow use wxTipWindow class], wxUSE_TIPWINDOW)
-WX_ARG_ENABLE(popupwin, [ --enable-popupwin use wxPopUpWindow class], wxUSE_POPUPWIN)
+dnl please keep the settings below in alphabetical order
+WX_ARG_FEATURE(accel, [ --enable-accel use accelerators], wxUSE_ACCEL)
+WX_ARG_FEATURE(animatectrl, [ --enable-animatectrl use wxAnimationCtrl class], wxUSE_ANIMATIONCTRL)
+WX_ARG_FEATURE(artstd, [ --enable-artstd use standard XPM icons in wxArtProvider], wxUSE_ARTPROVIDER_STD)
+WX_ARG_FEATURE(arttango, [ --enable-arttango use Tango icons in wxArtProvider], wxUSE_ARTPROVIDER_TANGO)
+WX_ARG_FEATURE(bmpbutton, [ --enable-bmpbutton use wxBitmapButton class], wxUSE_BMPBUTTON)
+WX_ARG_FEATURE(bmpcombobox, [ --enable-bmpcombobox use wxBitmapComboBox class], wxUSE_BITMAPCOMBOBOX)
+WX_ARG_FEATURE(button, [ --enable-button use wxButton class], wxUSE_BUTTON)
+WX_ARG_FEATURE(calendar, [ --enable-calendar use wxCalendarCtrl class], wxUSE_CALCTRL)
+WX_ARG_FEATURE(caret, [ --enable-caret use wxCaret class], wxUSE_CARET)
+WX_ARG_FEATURE(checkbox, [ --enable-checkbox use wxCheckBox class], wxUSE_CHECKBOX)
+WX_ARG_FEATURE(checklst, [ --enable-checklst use wxCheckListBox (listbox with checkboxes) class], wxUSE_CHECKLST)
+WX_ARG_FEATURE(choice, [ --enable-choice use wxChoice class], wxUSE_CHOICE)
+WX_ARG_FEATURE(choicebook, [ --enable-choicebook use wxChoicebook class], wxUSE_CHOICEBOOK)
+WX_ARG_FEATURE(collpane, [ --enable-collpane use wxCollapsiblePane class], wxUSE_COLLPANE)
+WX_ARG_FEATURE(colourpicker,[ --enable-colourpicker use wxColourPickerCtrl class], wxUSE_COLOURPICKERCTRL)
+WX_ARG_FEATURE(combobox, [ --enable-combobox use wxComboBox class], wxUSE_COMBOBOX)
+WX_ARG_FEATURE(comboctrl, [ --enable-comboctrl use wxComboCtrl class], wxUSE_COMBOCTRL)
+WX_ARG_FEATURE(commandlinkbutton, [ --enable-commandlinkbutton use wxCommmandLinkButton class], wxUSE_COMMANDLINKBUTTON)
+WX_ARG_FEATURE(dataviewctrl,[ --enable-dataviewctrl use wxDataViewCtrl class], wxUSE_DATAVIEWCTRL)
+WX_ARG_FEATURE(datepick, [ --enable-datepick use wxDatePickerCtrl class], wxUSE_DATEPICKCTRL)
+WX_ARG_FEATURE(detect_sm, [ --enable-detect_sm use code to detect X11 session manager], wxUSE_DETECT_SM)
+WX_ARG_FEATURE(dirpicker, [ --enable-dirpicker use wxDirPickerCtrl class], wxUSE_DIRPICKERCTRL)
+WX_ARG_FEATURE(display, [ --enable-display use wxDisplay class], wxUSE_DISPLAY)
+WX_ARG_FEATURE(editablebox, [ --enable-editablebox use wxEditableListBox class], wxUSE_EDITABLELISTBOX)
+WX_ARG_FEATURE(filectrl, [ --enable-filectrl use wxFileCtrl class], wxUSE_FILECTRL)
+WX_ARG_FEATURE(filepicker, [ --enable-filepicker use wxFilePickerCtrl class], wxUSE_FILEPICKERCTRL)
+WX_ARG_FEATURE(fontpicker, [ --enable-fontpicker use wxFontPickerCtrl class], wxUSE_FONTPICKERCTRL)
+WX_ARG_FEATURE(gauge, [ --enable-gauge use wxGauge class], wxUSE_GAUGE)
+WX_ARG_FEATURE(grid, [ --enable-grid use wxGrid class], wxUSE_GRID)
+WX_ARG_FEATURE(headerctrl, [ --enable-headerctrl use wxHeaderCtrl class], wxUSE_HEADERCTRL)
+WX_ARG_FEATURE(hyperlink, [ --enable-hyperlink use wxHyperlinkCtrl class], wxUSE_HYPERLINKCTRL)
+WX_ARG_FEATURE(imaglist, [ --enable-imaglist use wxImageList class], wxUSE_IMAGLIST)
+WX_ARG_FEATURE(infobar, [ --enable-infobar use wxInfoBar class], wxUSE_INFOBAR)
+WX_ARG_FEATURE(listbook, [ --enable-listbook use wxListbook class], wxUSE_LISTBOOK)
+WX_ARG_FEATURE(listbox, [ --enable-listbox use wxListBox class], wxUSE_LISTBOX)
+WX_ARG_FEATURE(listctrl, [ --enable-listctrl use wxListCtrl class], wxUSE_LISTCTRL)
+WX_ARG_FEATURE(notebook, [ --enable-notebook use wxNotebook class], wxUSE_NOTEBOOK)
+WX_ARG_FEATURE(notifmsg, [ --enable-notifmsg use wxNotificationMessage class], wxUSE_NOTIFICATION_MESSAGE)
+WX_ARG_FEATURE(odcombobox, [ --enable-odcombobox use wxOwnerDrawnComboBox class], wxUSE_ODCOMBOBOX)
+WX_ARG_FEATURE(popupwin, [ --enable-popupwin use wxPopUpWindow class], wxUSE_POPUPWIN)
+WX_ARG_FEATURE(radiobox, [ --enable-radiobox use wxRadioBox class], wxUSE_RADIOBOX)
+WX_ARG_FEATURE(radiobtn, [ --enable-radiobtn use wxRadioButton class], wxUSE_RADIOBTN)
+WX_ARG_FEATURE(richmsgdlg, [ --enable-richmsgdlg use wxRichMessageDialog class], wxUSE_RICHMSGDLG)
+WX_ARG_FEATURE(rearrangectrl,[ --enable-rearrangectrl use wxRearrangeList/Ctrl/Dialog], wxUSE_REARRANGECTRL)
+WX_ARG_FEATURE(sash, [ --enable-sash use wxSashWindow class], wxUSE_SASH)
+WX_ARG_FEATURE(scrollbar, [ --enable-scrollbar use wxScrollBar class and scrollable windows], wxUSE_SCROLLBAR)
+WX_ARG_FEATURE(searchctrl, [ --enable-searchctrl use wxSearchCtrl class], wxUSE_SEARCHCTRL)
+WX_ARG_FEATURE(slider, [ --enable-slider use wxSlider class], wxUSE_SLIDER)
+WX_ARG_FEATURE(spinbtn, [ --enable-spinbtn use wxSpinButton class], wxUSE_SPINBTN)
+WX_ARG_FEATURE(spinctrl, [ --enable-spinctrl use wxSpinCtrl class], wxUSE_SPINCTRL)
+WX_ARG_FEATURE(splitter, [ --enable-splitter use wxSplitterWindow class], wxUSE_SPLITTER)
+WX_ARG_FEATURE(statbmp, [ --enable-statbmp use wxStaticBitmap class], wxUSE_STATBMP)
+WX_ARG_FEATURE(statbox, [ --enable-statbox use wxStaticBox class], wxUSE_STATBOX)
+WX_ARG_FEATURE(statline, [ --enable-statline use wxStaticLine class], wxUSE_STATLINE)
+WX_ARG_FEATURE(stattext, [ --enable-stattext use wxStaticText class], wxUSE_STATTEXT)
+WX_ARG_FEATURE(statusbar, [ --enable-statusbar use wxStatusBar class], wxUSE_STATUSBAR)
+WX_ARG_FEATURE(taskbaricon, [ --enable-taskbaricon use wxTaskBarIcon class], wxUSE_TASKBARICON)
+WX_ARG_FEATURE(tbarnative, [ --enable-tbarnative use native wxToolBar class], wxUSE_TOOLBAR_NATIVE)
+WX_ARG_FEATURE(textctrl, [ --enable-textctrl use wxTextCtrl class], wxUSE_TEXTCTRL)
+WX_ARG_FEATURE(tipwindow, [ --enable-tipwindow use wxTipWindow class], wxUSE_TIPWINDOW)
+WX_ARG_FEATURE(togglebtn, [ --enable-togglebtn use wxToggleButton class], wxUSE_TOGGLEBTN)
+WX_ARG_FEATURE(toolbar, [ --enable-toolbar use wxToolBar class], wxUSE_TOOLBAR)
+WX_ARG_FEATURE(toolbook, [ --enable-toolbook use wxToolbook class], wxUSE_TOOLBOOK)
+WX_ARG_FEATURE(treebook, [ --enable-treebook use wxTreebook class], wxUSE_TREEBOOK)
+WX_ARG_FEATURE(treectrl, [ --enable-treectrl use wxTreeCtrl class], wxUSE_TREECTRL)
dnl ---------------------------------------------------------------------------
dnl common dialogs
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(commondlg, [ --enable-commondlg use all common dialogs], wxUSE_COMMONDLGS)
-WX_ARG_ENABLE(aboutdlg, [ --enable-aboutdlg use wxAboutBox], wxUSE_ABOUTDLG)
-WX_ARG_ENABLE(choicedlg, [ --enable-choicedlg use wxChoiceDialog], wxUSE_CHOICEDLG)
-WX_ARG_ENABLE(coldlg, [ --enable-coldlg use wxColourDialog], wxUSE_COLOURDLG)
-WX_ARG_ENABLE(filedlg, [ --enable-filedlg use wxFileDialog], wxUSE_FILEDLG)
-WX_ARG_ENABLE(finddlg, [ --enable-finddlg use wxFindReplaceDialog], wxUSE_FINDREPLDLG)
-WX_ARG_ENABLE(fontdlg, [ --enable-fontdlg use wxFontDialog], wxUSE_FONTDLG)
-WX_ARG_ENABLE(dirdlg, [ --enable-dirdlg use wxDirDialog], wxUSE_DIRDLG)
-WX_ARG_ENABLE(msgdlg, [ --enable-msgdlg use wxMessageDialog], wxUSE_MSGDLG)
-WX_ARG_ENABLE(numberdlg, [ --enable-numberdlg use wxNumberEntryDialog], wxUSE_NUMBERDLG)
-WX_ARG_ENABLE(splash, [ --enable-splash use wxSplashScreen], wxUSE_SPLASH)
-WX_ARG_ENABLE(textdlg, [ --enable-textdlg use wxTextDialog], wxUSE_TEXTDLG)
-WX_ARG_ENABLE(tipdlg, [ --enable-tipdlg use startup tips], wxUSE_STARTUP_TIPS)
-WX_ARG_ENABLE(progressdlg, [ --enable-progressdlg use wxProgressDialog], wxUSE_PROGRESSDLG)
-WX_ARG_ENABLE(wizarddlg, [ --enable-wizarddlg use wxWizard], wxUSE_WIZARDDLG)
+WX_ARG_FEATURE(commondlg, [ --enable-commondlg use all common dialogs], wxUSE_COMMONDLGS)
+WX_ARG_FEATURE(aboutdlg, [ --enable-aboutdlg use wxAboutBox], wxUSE_ABOUTDLG)
+WX_ARG_FEATURE(choicedlg, [ --enable-choicedlg use wxChoiceDialog], wxUSE_CHOICEDLG)
+WX_ARG_FEATURE(coldlg, [ --enable-coldlg use wxColourDialog], wxUSE_COLOURDLG)
+WX_ARG_FEATURE(filedlg, [ --enable-filedlg use wxFileDialog], wxUSE_FILEDLG)
+WX_ARG_FEATURE(finddlg, [ --enable-finddlg use wxFindReplaceDialog], wxUSE_FINDREPLDLG)
+WX_ARG_FEATURE(fontdlg, [ --enable-fontdlg use wxFontDialog], wxUSE_FONTDLG)
+WX_ARG_FEATURE(dirdlg, [ --enable-dirdlg use wxDirDialog], wxUSE_DIRDLG)
+WX_ARG_FEATURE(msgdlg, [ --enable-msgdlg use wxMessageDialog], wxUSE_MSGDLG)
+WX_ARG_FEATURE(numberdlg, [ --enable-numberdlg use wxNumberEntryDialog], wxUSE_NUMBERDLG)
+WX_ARG_FEATURE(splash, [ --enable-splash use wxSplashScreen], wxUSE_SPLASH)
+WX_ARG_FEATURE(textdlg, [ --enable-textdlg use wxTextDialog], wxUSE_TEXTDLG)
+WX_ARG_FEATURE(tipdlg, [ --enable-tipdlg use startup tips], wxUSE_STARTUP_TIPS)
+WX_ARG_FEATURE(progressdlg, [ --enable-progressdlg use wxProgressDialog], wxUSE_PROGRESSDLG)
+WX_ARG_FEATURE(wizarddlg, [ --enable-wizarddlg use wxWizard], wxUSE_WIZARDDLG)
dnl ---------------------------------------------------------------------------
dnl misc GUI options
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(menus, [ --enable-menus use wxMenu/wxMenuBar/wxMenuItem classes], wxUSE_MENUS)
-WX_ARG_ENABLE(miniframe, [ --enable-miniframe use wxMiniFrame class], wxUSE_MINIFRAME)
-WX_ARG_ENABLE(tooltips, [ --enable-tooltips use wxToolTip class], wxUSE_TOOLTIPS)
-WX_ARG_ENABLE(splines, [ --enable-splines use spline drawing code], wxUSE_SPLINES)
-WX_ARG_ENABLE(mousewheel, [ --enable-mousewheel use mousewheel], wxUSE_MOUSEWHEEL)
-WX_ARG_ENABLE(validators, [ --enable-validators use wxValidator and derived classes], wxUSE_VALIDATORS)
-WX_ARG_ENABLE(busyinfo, [ --enable-busyinfo use wxBusyInfo], wxUSE_BUSYINFO)
-WX_ARG_ENABLE(joystick, [ --enable-joystick use wxJoystick], wxUSE_JOYSTICK)
-WX_ARG_ENABLE(metafile, [ --enable-metafiles use wxMetaFile (Win32 only)], wxUSE_METAFILE)
-WX_ARG_ENABLE(dragimage, [ --enable-dragimage use wxDragImage], wxUSE_DRAGIMAGE)
-WX_ARG_ENABLE(accessibility,[ --enable-accessibility enable accessibility support], wxUSE_ACCESSIBILITY)
-
-if test "$wxUSE_MSW" = "1"; then
- WX_ARG_ENABLE(dccache, [ --enable-dccache cache temporary wxDC objects (Win32 only)], wxUSE_DC_CACHEING)
-fi
+WX_ARG_FEATURE(menus, [ --enable-menus use wxMenu/wxMenuBar/wxMenuItem classes], wxUSE_MENUS)
+WX_ARG_FEATURE(miniframe, [ --enable-miniframe use wxMiniFrame class], wxUSE_MINIFRAME)
+WX_ARG_FEATURE(tooltips, [ --enable-tooltips use wxToolTip class], wxUSE_TOOLTIPS)
+WX_ARG_FEATURE(splines, [ --enable-splines use spline drawing code], wxUSE_SPLINES)
+WX_ARG_FEATURE(mousewheel, [ --enable-mousewheel use mousewheel], wxUSE_MOUSEWHEEL)
+WX_ARG_FEATURE(validators, [ --enable-validators use wxValidator and derived classes], wxUSE_VALIDATORS)
+WX_ARG_FEATURE(busyinfo, [ --enable-busyinfo use wxBusyInfo], wxUSE_BUSYINFO)
+WX_ARG_FEATURE(joystick, [ --enable-joystick use wxJoystick], wxUSE_JOYSTICK)
+WX_ARG_FEATURE(metafile, [ --enable-metafiles use wxMetaFile (Win32 only)], wxUSE_METAFILE)
+WX_ARG_FEATURE(dragimage, [ --enable-dragimage use wxDragImage], wxUSE_DRAGIMAGE)
+WX_ARG_FEATURE(accessibility,[ --enable-accessibility enable accessibility support], wxUSE_ACCESSIBILITY)
+WX_ARG_FEATURE(uiactionsim, [ --enable-uiactionsim use wxUIActionSimulator (experimental)], wxUSE_UIACTIONSIMULATOR)
dnl ---------------------------------------------------------------------------
dnl support for image formats that do not rely on external library
dnl ---------------------------------------------------------------------------
-WX_ARG_ENABLE(palette, [ --enable-palette use wxPalette class], wxUSE_PALETTE)
-WX_ARG_ENABLE(image, [ --enable-image use wxImage class], wxUSE_IMAGE)
-WX_ARG_ENABLE(gif, [ --enable-gif use gif images (GIF file format)], wxUSE_GIF)
-WX_ARG_ENABLE(pcx, [ --enable-pcx use pcx images (PCX file format)], wxUSE_PCX)
-WX_ARG_ENABLE(tga, [ --enable-tga use tga images (TGA file format)], wxUSE_TGA)
-WX_ARG_ENABLE(iff, [ --enable-iff use iff images (IFF file format)], wxUSE_IFF)
-WX_ARG_ENABLE(pnm, [ --enable-pnm use pnm images (PNM file format)], wxUSE_PNM)
-WX_ARG_ENABLE(xpm, [ --enable-xpm use xpm images (XPM file format)], wxUSE_XPM)
-WX_ARG_ENABLE(ico_cur, [ --enable-icocur use Windows ICO and CUR formats], wxUSE_ICO_CUR)
-
-fi
+WX_ARG_FEATURE(palette, [ --enable-palette use wxPalette class], wxUSE_PALETTE)
+WX_ARG_FEATURE(image, [ --enable-image use wxImage class], wxUSE_IMAGE)
+WX_ARG_FEATURE(gif, [ --enable-gif use gif images (GIF file format)], wxUSE_GIF)
+WX_ARG_FEATURE(pcx, [ --enable-pcx use pcx images (PCX file format)], wxUSE_PCX)
+WX_ARG_FEATURE(tga, [ --enable-tga use tga images (TGA file format)], wxUSE_TGA)
+WX_ARG_FEATURE(iff, [ --enable-iff use iff images (IFF file format)], wxUSE_IFF)
+WX_ARG_FEATURE(pnm, [ --enable-pnm use pnm images (PNM file format)], wxUSE_PNM)
+WX_ARG_FEATURE(xpm, [ --enable-xpm use xpm images (XPM file format)], wxUSE_XPM)
+WX_ARG_FEATURE(ico_cur, [ --enable-ico_cur use Windows ICO and CUR formats], wxUSE_ICO_CUR)
dnl ---------------------------------------------------------------------------
-dnl flavour support
+dnl wxMSW-only options
dnl ---------------------------------------------------------------------------
-dnl Should this be --enable? I flip-flopped a couple of times and this seems
-dnl in the spirit if not the letter, we have gtk-prefix and the like in this group.
-dnl It doesn't actually change anything but the output file names.
-AC_ARG_WITH(flavour, [ --with-flavour=NAME specify a name to identify this build], [WX_FLAVOUR="$withval"])
+WX_ARG_FEATURE(dccache, [ --enable-dccache cache temporary wxDC objects (Win32 only)], wxUSE_DC_CACHEING)
+WX_ARG_FEATURE(ps-in-msw, [ --enable-ps-in-msw use PS printing in wxMSW (Win32 only)], wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW)
+WX_ARG_FEATURE(ownerdrawn, [ --enable-ownerdrawn use owner drawn controls (Win32 and OS/2 only)], wxUSE_OWNER_DRAWN)
+WX_ARG_FEATURE(uxtheme, [ --enable-uxtheme enable support for Windows XP themed look (Win32 only)], wxUSE_UXTHEME)
+WX_ARG_FEATURE(wxdib, [ --enable-wxdib use wxDIB class (Win32 only)], wxUSE_DIB)
-dnl ---------------------------------------------------------------------------
-dnl some win32 settings
-dnl ---------------------------------------------------------------------------
-
-WX_ARG_ENABLE(official_build, [ --enable-official_build official build of wxWidgets (win32 DLL only)], wxUSE_OFFICIAL_BUILD)
-AC_ARG_ENABLE(vendor, [ --enable-vendor=VENDOR vendor name (win32 DLL only)], [VENDOR="$enableval"])
-if test "x$VENDOR" = "x"; then
- VENDOR="custom"
+dnl this one is not really MSW-specific but it exists mainly to be turned off
+dnl under MSW, it should be off by default on the other platforms
+if test "$wxUSE_MSW" != 1; then
+ DEFAULT_wxUSE_AUTOID_MANAGEMENT=no
fi
+WX_ARG_FEATURE(autoidman, [ --enable-autoidman use automatic ids management], wxUSE_AUTOID_MANAGEMENT)
-dnl for GUI only
-
-dnl cache the options values before (may be) aborting below
-WX_ARG_CACHE_FLUSH
-
-dnl check that no more than one toolkit is given and that if none are given that
-dnl we have a default one
-
-AC_MSG_CHECKING(for toolkit)
-
-# In Wine, we need to default to MSW, not GTK or MOTIF
-if test "$wxUSE_WINE" = "yes"; then
- DEFAULT_DEFAULT_wxUSE_GTK=0
- DEFAULT_DEFAULT_wxUSE_MOTIF=0
- DEFAULT_DEFAULT_wxUSE_MSW=1
- wxUSE_SHARED=no
- CC=${CC:-winegcc}
- CXX=${CXX:-wineg++}
-fi
-
-
-if test "$wxUSE_GUI" = "yes"; then
-
- if test "$USE_BEOS" = 1; then
- AC_MSG_ERROR([BeOS GUI is not supported yet, use --disable-gui])
- fi
-
- if test "$TOOLKIT_GIVEN" = 1; then
- dnl convert "yes", "any" or a number to 1 and "no" to 0
- for toolkit in `echo $ALL_TOOLKITS`; do
- var=wxUSE_$toolkit
- eval "value=\$${var}"
- if test "x$value" = "xno"; then
- eval "$var=0"
- elif test "x$value" != "x"; then
- eval "$var=1"
- fi
-
- if test "x$value" != "x" -a "x$value" != "xyes" -a "x$value" != "xno"; then
- eval "wx${toolkit}_VERSION=$value"
- fi
- done
- else
- dnl try to guess the most apropriate toolkit for this platform
- for toolkit in `echo $ALL_TOOLKITS`; do
- if test "$has_toolkit_in_cache" != 1; then
- var=DEFAULT_DEFAULT_wxUSE_$toolkit
- else
- var=DEFAULT_wxUSE_$toolkit
-
- eval "version=\$DEFAULT_wx${toolkit}_VERSION"
- if test "x$version" != "x"; then
- eval "wx${toolkit}_VERSION=$version"
- fi
- fi
- eval "wxUSE_$toolkit=\$${var}"
- done
- fi
-
- dnl we suppose that expr is available (maybe there is a better way to do
- dnl this? what about using ALL_TOOLKITS? TODO)
- NUM_TOOLKITS=`expr ${wxUSE_COCOA:-0} + ${wxUSE_GTK:-0} + ${wxUSE_MAC:-0} \
- + ${wxUSE_MGL:-0} + ${wxUSE_DFB:-0} + ${wxUSE_MICROWIN:-0} \
- + ${wxUSE_MOTIF:-0} + ${wxUSE_MSW:-0} + ${wxUSE_X11:-0}`
-
- dnl Allow wxUSE_PM only for OS/2 with EMX.
- case "${host}" in
- *-pc-os2_emx | *-pc-os2-emx )
- NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
- esac
-
- case "$NUM_TOOLKITS" in
- 1)
- ;;
- 0)
- AC_MSG_ERROR(Please specify a toolkit -- cannot determine the default for ${host})
- ;;
- *)
- AC_MSG_ERROR(Please specify at most one toolkit (maybe some are cached in configarg.cache?))
- esac
-
- # to be removed when --disable-gtk2 isn't needed
- if test "x$wxUSE_GTK2" = "xyes"; then
- wxGTK_VERSION=2
- elif test "x$wxUSE_GTK2" = "xno"; then
- wxGTK_VERSION=1
- fi
-
- dnl cache the wxUSE_<TOOLKIT> values too
- for toolkit in `echo $ALL_TOOLKITS`; do
- var=wxUSE_$toolkit
- eval "value=\$${var}"
- if test "x$value" != x; then
- cache_var=CACHE_$toolkit
- eval "cache=\$${cache_var}"
- if test "$cache" = 1; then
- echo "$var=$value" >> ${wx_arg_cache_file}
- eval "version=\$wx${toolkit}_VERSION"
- if test "x$version" != "x"; then
- echo "wx${toolkit}_VERSION=$version" >> ${wx_arg_cache_file}
- fi
- fi
- if test "$value" = 1; then
- toolkit_echo=`echo $toolkit | tr "[[A-Z]]" "[[a-z]]"`
- AC_MSG_RESULT($toolkit_echo)
- fi
- fi
- done
-else
- if test "x$host_alias" != "x"; then
- AC_MSG_RESULT(base ($host_alias hosted) only)
- else
- AC_MSG_RESULT(base only)
- fi
fi
+dnl for GUI only
dnl ---------------------------------------------------------------------------
dnl Checks for programs
dnl
dnl this magic incantation is needed to prevent AC_PROG_CC from setting the
dnl default CFLAGS (something like "-g -O2") -- we don't need this as we add
-dnl -g and -O flags ourselves below
+dnl (if not already present in C*FLAGS) the -g and -O flags ourselves below
CFLAGS=${CFLAGS:=}
AC_BAKEFILE_PROG_CC
CXXFLAGS=${CXXFLAGS:=}
AC_BAKEFILE_PROG_CXX
-dnl ranlib command
-dnl defines RANLIB with the appropriate command
-AC_PROG_RANLIB
+dnl configure always sets CXX to something as it falls back to g++ even if no
+dnl C++ compiler was found, but we prefer to abort now with a clear error
+dnl message rather than give errors about all tests failures below
+if test "$CXX" = "g++" -a "$GXX" != "yes"; then
+ AC_MSG_ERROR([C++ compiler is needed to build wxWidgets])
+fi
dnl ar command
dnl defines AR with the appropriate command
-dnl
+dnl
dnl For Sun CC AC_BAKEFILE below sets AR to the compiler itself.
if test "x$SUNCXX" != xyes; then
AC_CHECK_TOOL(AR, ar)
fi
fi
-dnl install checks
-dnl defines INSTALL with the appropriate command
-AC_PROG_INSTALL
+dnl ---------------------------------------------------------------------------
+dnl Mac-specific SDK/architectures checks
+dnl ---------------------------------------------------------------------------
-dnl make install path absolute (if not already);
-dnl will fail with (some) MSDOS paths
-case ${INSTALL} in
- /* ) # Absolute
- ;;
- ?:* ) # Drive letter, considered as absolute.
- ;;
- *)
- INSTALL=`pwd`/${INSTALL} ;;
-esac
+if test "$wxUSE_MAC" = 1; then
+retest_macosx_linking=no
-case "${host}" in
+OSX_ARCH_OPTS=""
+if test "x$wxUSE_MAC_ARCH" != xno; then
+ OSX_ARCH_OPTS="-arch $wxUSE_MAC_ARCH"
+fi
- dnl The other BSD's should probably go in here too, since this is
- dnl to workaround a strange static lib BSDism.
- dnl Mac OS X install seems to ignore -p option...
- *-*-darwin* )
- INSTALL_PROGRAM="cp -fp"
- INSTALL_DATA="cp -fp"
- ;;
- *)
- ;;
-esac
+dnl Support the old --enable-universal_binary in case anyone was using it.
+ if test "x$wxUSE_UNIVERSAL_BINARY" != xno ; then
+ dnl --enable-universal_binary uses a default SDK (currently 10.4u)
+ dnl --enable-universal_binary=SDK names a path to an SDK
+ if test "x$wxUSE_UNIVERSAL_BINARY" == xyes; then
+ # Implicitly turn on the new --with-macosx-sdk using the default
+ # SDK which provides the behavior this option has always had.
+ if test "x$wxUSE_MACOSX_SDK" = "x"; then
+ AC_MSG_WARN([Enabling default SDK due to --enable-universal_binary.])
+ AC_MSG_WARN([If you don't want this, specify --without-macosx-sdk])
+ wxUSE_MACOSX_SDK=yes
+ fi
+ else
+ # Complain to user if he specified an argument to --enable-universal_binary
+ # and also 1) specified --with-macosx-sdk using the default (yes) or
+ # 2) specified --with-macosx-sdk using a path or 3) specified
+ # --without-macosx-sdk (no).
+ if test "x$wxUSE_MACOSX_SDK" != "x" ; then
+ AC_MSG_FAILURE([Please specify the new --with-macosx-sdk=PATH and do not specify an arg to --enable-universal_binary])
+ else
+ # Put the SDK path into the wxUSE_MACOSX_SDK. We don't have to
+ # special-case the empty string because the below test simply
+ # converts "no" to the empty string anyway.
+ wxUSE_MACOSX_SDK="$wxUSE_UNIVERSAL_BINARY"
+ dnl Warn about deprecated usage.
+ AC_MSG_WARN([Please use --with-macosx-sdk=PATH and --enable-universal_binary without an argument])
+ fi
+ fi
+ dnl FIXME: I think it would be better to put this into CC, CXX, and LD rather than the flags.
+ OSX_ARCH_OPTS="-arch ppc -arch i386"
+ if test "$wxUSE_OSX_COCOA" = 1; then
+ OSX_ARCH_OPTS="$OSX_ARCH_OPTS -arch x86_64"
+ fi
+ AC_MSG_CHECKING([for universal binary architectures])
+ AC_MSG_RESULT([$OSX_ARCH_OPTS])
+
+ dnl NOTE: Only the compiler driver needs arch flags. The link editor
+ dnl is incapable of using them but the compiler driver (which we use
+ dnl as LD when building dynamic libraries) uses them to invoke the
+ dnl real ld multiple times. If we moved to libtool -dynamic we would
+ dnl need no arch flags because libtool automatically invokes ld for
+ dnl every architecture found in the fat input files.
+ dnl
+ dnl For static library builds, AR/RANLIB automatically create proper
+ dnl fat archives although AR is unable to update them once RANLIB has
+ dnl made them into proper fat archives. Fortunately, our link process
+ dnl simply removes the .a file before using ar to create a new one.
+ dnl If we did move to libtool -static we still wouldn't need arch flags
+ dnl because libtool automatically figures it out based on input.
+ retest_macosx_linking=yes
+
+ dnl HACK: PCH could be made to work by precompiling for each architecture into separate directories
+ dnl and including all architecture directories with each compiler invocation.
+ dnl That would require a major rework of Bakefile and at the same time it would be nice to have
+ dnl Objective-C++ precompiled headers.
+ AC_MSG_WARN([Disabling precompiled headers due to universal binary build.])
+ bk_use_pch=no
+ fi
-dnl strip command
-dnl defines STRIP as strip or nothing (true) if not found
-AC_CHECK_TOOL(STRIP, strip, true)
+CXXFLAGS="$OSX_ARCH_OPTS $CXXFLAGS"
+CFLAGS="$OSX_ARCH_OPTS $CFLAGS"
+OBJCXXFLAGS="$OSX_ARCH_OPTS $OBJCXXFLAGS"
+OBJCFLAGS="$OSX_ARCH_OPTS $OBJCFLAGS"
+LDFLAGS="$OSX_ARCH_OPTS $LDFLAGS"
-dnl Win32 tools
-if test "$wxUSE_WINE" = "yes"; then
- AC_CHECK_TOOL(WINDRES, wrc)
- RESCOMP="$WINDRES"
-else
- case "${host}" in
- *-*-cygwin* | *-*-mingw32* )
- dnl Bakefile CVS (as of 2005-11-24) now detects windres properly
- dnl ... maybe it does, but it does not make it available here
- dnl anymore, so do it ourselves still.
- AC_CHECK_TOOL(WINDRES, windres)
- RESCOMP="$WINDRES"
- AC_CHECK_TOOL(DLLTOOL, dlltool)
- ;;
- esac
+dnl Set up the Mac OS X SDK. We do this early so configure tests will occur
+dnl with the SDK in place.
+dnl NOTE: We clobber wxUSE_MACOSX_SDK with the SDK path
+if test "x$wxUSE_MACOSX_SDK" = "xno"; then
+ wxUSE_MACOSX_SDK=
+elif test "x$wxUSE_MACOSX_SDK" = "xyes"; then
+ # TODO: Search for most recent SDK and use it.
+ wxUSE_MACOSX_SDK="/Developer/SDKs/MacOSX10.4u.sdk"
fi
-dnl does make support "-include" (only GNU make does AFAIK)?
-AC_CACHE_CHECK([if make is GNU make], wx_cv_prog_makeisgnu,
+
+if test "x$wxUSE_MACOSX_SDK" != "x"; then
+ AC_MSG_CHECKING([for SDK directory $wxUSE_MACOSX_SDK])
+ if ! test -d "$wxUSE_MACOSX_SDK"; then
+ AC_MSG_FAILURE([not found])
+ else
+ AC_MSG_RESULT([exists])
+ fi
+ MACOSX_SDK_OPTS="-isysroot $wxUSE_MACOSX_SDK"
+ eval "CC=\"$CC $MACOSX_SDK_OPTS\""
+ eval "CXX=\"$CXX $MACOSX_SDK_OPTS\""
+ eval "LD=\"$LD $MACOSX_SDK_OPTS\""
+ retest_macosx_linking=yes
+ dnl NOTE: When libtool is used in lieu of AR/RANLIB (i.e. in static mode)
+ dnl the syslibroot makes no difference. We aren't using libtool now but
+ dnl if we ever did, be aware that you don't need to worry about it.
+fi
+
+dnl Set up the deployment target
+dnl No : Don't specify a min version even if using an SDK
+dnl Yes : Use the version from the SDK if used, otherwise same as no
+dnl Param: Use the specified version
+if test "x$wxUSE_MACOSX_VERSION_MIN" = "xno"; then
+ wxUSE_MACOSX_VERSION_MIN=
+elif test "x$wxUSE_MACOSX_VERSION_MIN" = "xyes"; then
+ if test "x$wxUSE_MACOSX_SDK" != "x"; then
+ AC_MSG_CHECKING([SDK deployment version])
+dnl We need to quote the next line where we don't need macros and do need [] in the regex
+[
+ MACOSX_SDK_PLIST_VERSION_MIN=`defaults read "$wxUSE_MACOSX_SDK/SDKSettings" buildSettings | grep '^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}[^"]*"\{0,1\}; *$' | sed 's/^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}\([^"]*\)"\{0,1\} *; *$/\1/'`
+]
+ # If that failed, try again with the new key
+ if test "x$MACOSX_SDK_PLIST_VERSION_MIN" == "x"; then
[
- if ( ${SHELL-sh} -c "${MAKE-make} --version" 2> /dev/null |
- $EGREP -s GNU > /dev/null); then
- wx_cv_prog_makeisgnu="yes"
+ MACOSX_SDK_PLIST_VERSION_MIN=`defaults read "$wxUSE_MACOSX_SDK/SDKSettings" DefaultProperties | grep '^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}[^"]*"\{0,1\}; *$' | sed 's/^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}\([^"]*\)"\{0,1\} *; *$/\1/'`
+]
+ fi
+
+ if test "x$MACOSX_SDK_PLIST_VERSION_MIN" != "x"; then
+ wxUSE_MACOSX_VERSION_MIN=$MACOSX_SDK_PLIST_VERSION_MIN
+ AC_MSG_RESULT([$wxUSE_MACOSX_VERSION_MIN])
+ else
+ AC_MSG_WARN([Could not determine deployment target from SDKSettings.plist])
+ wxUSE_MACOSX_VERSION_MIN=
+ fi
+ else
+ wxUSE_MACOSX_VERSION_MIN=
+ fi
+elif test "x$wxUSE_MACOSX_VERSION_MIN" = "x"; then
+ AC_CHECK_PROGS(OSX_SW_VERS, sw_vers)
+ if test "$OSX_SW_VERS" != ""; then
+ OSX_VERSION=`sw_vers -productVersion | grep 10.[[0-9]]`
else
- wx_cv_prog_makeisgnu="no"
+ dnl can't determine it (happens e.g. when cross-compiling) so use a
+ dnl conservative default
+ AC_MSG_WARN([Assuming OS X 10.4, use --with-macosx-version-min to override.])
+ OSX_VERSION="10.4"
fi
-])
-if test "x$wx_cv_prog_makeisgnu" = "xyes"; then
- IF_GNU_MAKE=""
-else
- IF_GNU_MAKE="#"
+ case "$OSX_VERSION" in
+ 10.4* )
+ wxUSE_MACOSX_VERSION_MIN=10.4
+ ;;
+
+ * )
+ if test "$wxUSE_OSX_CARBON" = 1; then
+ # otherwise configure stops on leopard for universal_binary
+ wxUSE_MACOSX_VERSION_MIN=10.4
+ else
+ # for Cocoa, use 10.5 to be able to compile it in 64 bits too
+ wxUSE_MACOSX_VERSION_MIN=10.5
+ fi
+ ;;
+ esac
fi
-AC_SUBST(IF_GNU_MAKE)
+NEEDS_GCC40="no"
+if test "x$wxUSE_MACOSX_VERSION_MIN" == "x10.4"; then
+ NEEDS_GCC40="yes"
+fi
-dnl we don't need to check for VPATH support in GNU make - it does have it
-if test "x$wx_cv_prog_makeisgnu" != "xyes"; then
-dnl check if VPATH works
-AC_CACHE_CHECK([if make supports VPATH], wx_cv_prog_makevpath, [
-dnl create Makefile
-cat - << EOF > confMake
-check : file
- cp \$? \$@
- cp \$? final_file
-EOF
+if test "$wxUSE_OSX_CARBON" = 1; then
+ NEEDS_GCC40="yes"
+fi
+
+if test "x$NEEDS_GCC40" == "xyes"; then
+ # gcc 4.2 cannot compile 10.4 compatible code, so if the user is using it
+ # and wants 10.4 compatible code, then 'downgrade' to 4.0
+ # This is also the simplest way to get 32-bit binaries on Snow Leopard.
+ if test "x$CC" = "xgcc"; then
+ CCVERSION=`$CC --version | grep 4.[[2-9]].`
+ if test "x$CCVERSION" != "x"; then
+ echo "$as_me:$LINENO: WARNING: gcc >= 4.2 cannot compile 10.4 compatible code. Using gcc 4.0 instead."
+ CC="/usr/bin/gcc-4.0"
+ fi
+ fi
-if test ! -d sub ; then
- mkdir sub
+ if test "x$CXX" = "xg++"; then
+ CCVERSION=`$CXX --version | grep 4.[[2-9]].`
+ if test "x$CCVERSION" != "x"; then
+ CXX="/usr/bin/g++-4.0"
+ fi
+ fi
fi
-echo dummy > sub/file
-${MAKE-make} -f confMake VPATH=sub 2>&5 > /dev/null
-RESULT=$?
-rm -f sub/file check final_file confMake
-rmdir sub
-if test "$RESULT" = 0; then
- wx_cv_prog_makevpath="yes"
-else
- wx_cv_prog_makevpath="no"
+
+if test "x$wxUSE_MACOSX_VERSION_MIN" != "x"; then
+ if test "$wxUSE_OSX_IPHONE" = 1; then
+ MACOSX_VERSION_MIN_OPTS="-miphoneos-version-min=$wxUSE_MACOSX_VERSION_MIN"
+ else
+ MACOSX_VERSION_MIN_OPTS="-mmacosx-version-min=$wxUSE_MACOSX_VERSION_MIN"
+ fi
+ eval "CC=\"$CC $MACOSX_VERSION_MIN_OPTS\""
+ eval "CXX=\"$CXX $MACOSX_VERSION_MIN_OPTS\""
+ eval "LD=\"$LD $MACOSX_VERSION_MIN_OPTS\""
+ retest_macosx_linking=yes
+fi
+
+dnl If either an SDK or a version option was added, make sure that we can
+dnl still compile and link both C and C++. If we didn't do this, then most
+dnl of the remaining tests would fail.
+if test "x$retest_macosx_linking" = "xyes"; then
+ AC_LANG_PUSH(C)
+ AC_MSG_CHECKING([if C compiler works with SDK/version options])
+ AC_TRY_LINK([],[],[AC_MSG_RESULT([yes])],[AC_MSG_FAILURE([no. Try a different SDK]); exit 1])
+ AC_LANG_POP()
+
+ AC_LANG_PUSH(C++)
+ AC_MSG_CHECKING([if C++ compiler works with SDK/version options])
+ AC_TRY_LINK([],[],[AC_MSG_RESULT([yes])],[AC_MSG_FAILURE([no. Try a different SDK]); exit 1])
+ AC_LANG_POP()
fi
-])
-if test "x$wx_cv_prog_makevpath" != "xyes"; then
-AC_MSG_ERROR([
-You need a make-utility that is able to use the variable
-VPATH correctly.
-If your version of make does not support VPATH correctly,
-please install GNU-make (possibly as gmake), and start
-configure with the following command:
-export MAKE=gmake; ./configure for sh-type shells
-setenv MAKE gmake; ./configure for csh-type shells
-Also please do remember to use gmake in this case every time
-you are trying to compile.
-])
-fi dnl make without VPATH
-fi dnl not GNU make
+fi dnl wxUSE_MAC
-dnl needed for making link to setup.h
-AC_PROG_LN_S
+case "${host}" in
+ dnl The other BSD's should probably go in here too, since this is
+ dnl to workaround a strange static lib BSDism.
+ dnl Mac OS X install seems to ignore -p option...
+ *-*-darwin* )
+ INSTALL_PROGRAM="cp -fp"
+ INSTALL_DATA="cp -fp"
+ ;;
+ *)
+ ;;
+esac
dnl ------------------------------------------------------------------------
dnl Platform specific tests
dnl Note: non-empty last parameter makes check compile-only,
dnl skipping worthless preprocessing check
-AC_CHECK_HEADERS(stdlib.h fnmatch.h langinfo.h malloc.h unistd.h wchar.h,,, [AC_INCLUDES_DEFAULT()])
+AC_CHECK_HEADERS(langinfo.h wchar.h,,, [AC_INCLUDES_DEFAULT])
dnl maybe wchar_t is in wcstr.h if we don't have wchar.h?
if test "$ac_cv_header_wchar_h" != "yes"; then
- AC_CHECK_HEADER(wcstr.h,,, [AC_INCLUDES_DEFAULT()])
+ AC_CHECK_HEADERS([wcstr.h],,, [AC_INCLUDES_DEFAULT()])
fi
case "${host}" in
dnl POSIX needs this for select(), but old systems don't have it
if test "$USE_UNIX" = 1 ; then
- AC_CHECK_HEADER([sys/select.h],,, [AC_INCLUDES_DEFAULT()])
+ AC_CHECK_HEADERS([sys/select.h],,, [AC_INCLUDES_DEFAULT()])
fi
dnl ---------------------------------------------------------------------------
;;
*-hp-hpux* )
AC_CHECK_SIZEOF(long long, 0)
- if test "$ac_cv_sizeof_long_long" != "0"; then
+ if test "$ac_cv_sizeof_long_long" != 0; then
dnl HPUX 10.20 headers need this define in order to use long long definitions
CPPFLAGS="-D_INCLUDE_LONGLONG $CPPFLAGS"
fi
#include <stdio.h>
]
)
-if test "$ac_cv_sizeof_wchar_t" != "0"; then
- wxUSE_WCHAR_T=yes
-else
- wxUSE_WCHAR_T=no
+if test "$ac_cv_sizeof_wchar_t" = 0; then
+ AC_MSG_ERROR([wxWidgets requires wchar_t support.])
fi
+AC_DEFINE(wxUSE_WCHAR_T)
dnl checks needed to define wxVaCopy
AC_CACHE_CHECK([for va_copy],
wx_cv_func_va_copy,
[
+ AC_LANG_PUSH(C++)
AC_LINK_IFELSE([
#include <stdarg.h>
void foo(char *f, ...)
wx_cv_func_va_copy=yes,
wx_cv_func_va_copy=no
)
+ AC_LANG_POP()
]
)
fi dnl wxUSE_VARARG_MACROS == yes
+
dnl check for large file support
+LARGEFILE_CPPFLAGS=
AC_SYS_LARGEFILE
+if test "$ac_cv_sys_file_offset_bits" = "64"; then
+ LARGEFILE_CPPFLAGS="-D_FILE_OFFSET_BITS=64"
+elif test "$ac_cv_sys_large_files" = 1; then
+ LARGEFILE_CPPFLAGS="-D_LARGE_FILES"
+fi
dnl we need to define _FILE_OFFSET_BITS or _LARGE_FILES on the compiler command
dnl line because otherwise the system headers risk being included before
dnl wx/defs.h which defines these constants leading to inconsistent
dnl sizeof(off_t) in different source files of the same program and linking
dnl problems
-if test "x$wx_largefile" = "xyes"; then
- if test "x$ac_cv_sys_file_offset_bits" = "x64"; then
- WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES"
-
- dnl We get "Large Files (ILP32) not supported in strict ANSI mode."
- dnl #error from HP standard headers unless __STDC_EXT__ is defined.
- dnl The compiler should define it automatically, but some old g++
- dnl versions don't define it, so test and add it if necessary. AFAIK
- dnl the problem only affects the C++ compiler so it is added to
- dnl CXXFLAGS only.
- if test "$USE_HPUX" = 1 -a "$GXX" = "yes"; then
- AC_CACHE_CHECK(
- [if -D__STDC_EXT__ is required],
- wx_cv_STDC_EXT_required,
- [
- AC_LANG_PUSH(C++)
- AC_TRY_COMPILE(
- [],
- [
- #ifndef __STDC_EXT__
- choke me
- #endif
- ],
- wx_cv_STDC_EXT_required=no,
- wx_cv_STDC_EXT_required=yes
- )
- AC_LANG_POP()
- ]
- )
- if test "x$wx_cv_STDC_EXT_required" = "xyes"; then
- WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -D__STDC_EXT__"
- fi
+if test -n "$LARGEFILE_CPPFLAGS"; then
+ WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS $LARGEFILE_CPPFLAGS"
+
+ dnl We get "Large Files (ILP32) not supported in strict ANSI mode."
+ dnl #error from HP standard headers unless __STDC_EXT__ is defined.
+ dnl The compiler should define it automatically, but some old g++
+ dnl versions don't define it, so test and add it if necessary. AFAIK
+ dnl the problem only affects the C++ compiler so it is added to
+ dnl CXXFLAGS only.
+ if test "$USE_HPUX" = 1 -a "$GXX" = "yes"; then
+ AC_CACHE_CHECK(
+ [if -D__STDC_EXT__ is required],
+ wx_cv_STDC_EXT_required,
+ [
+ AC_LANG_PUSH(C++)
+ AC_TRY_COMPILE(
+ [],
+ [
+ #ifndef __STDC_EXT__
+ choke me
+ #endif
+ ],
+ wx_cv_STDC_EXT_required=no,
+ wx_cv_STDC_EXT_required=yes
+ )
+ AC_LANG_POP()
+ ]
+ )
+ if test "x$wx_cv_STDC_EXT_required" = "xyes"; then
+ WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -D__STDC_EXT__"
fi
- else
- WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D_LARGE_FILES"
- fi
- dnl AC_FUNC_FSEEKO sets HAVE_FSEEKO and $ac_cv_sys_largefile_source
- AC_FUNC_FSEEKO
- if test "$ac_cv_sys_largefile_source" != no; then
- WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D_LARGEFILE_SOURCE=$ac_cv_sys_largefile_source"
fi
fi
+dnl AC_FUNC_FSEEKO sets HAVE_FSEEKO and $ac_cv_sys_largefile_source
+dnl
+dnl it may be affected by large file flags (this happens under HP-UX 11 for
+dnl example) so set them before using it and also use C++ to ensure that we get
+dnl errors, not warnings, about the missing functions
+AC_LANG_PUSH(C++)
+old_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="$CPPFLAGS $LARGEFILE_CPPFLAGS"
+AC_FUNC_FSEEKO
+CPPFLAGS="$old_CPPFLAGS"
+AC_LANG_POP()
+if test "$ac_cv_sys_largefile_source" != no; then
+ WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D_LARGEFILE_SOURCE=$ac_cv_sys_largefile_source"
+fi
+
dnl check for bytesex stuff (don't use AC_C_BIGENDIAN to allow cross-compiling)
WX_C_BIGENDIAN
dnl check for iostream (as opposed to iostream.h) standard header
WX_CPP_NEW_HEADERS(, AC_DEFINE(wxUSE_IOSTREAMH))
-dnl check whether C++ compiler supports bool built-in type
-WX_CPP_BOOL
-
dnl check whether C++ compiler supports explicit keyword
WX_CPP_EXPLICIT
-dnl check whether C++ compiler supports C++ casts
-AC_CXX_CONST_CAST
-AC_CXX_REINTERPRET_CAST
-AC_CXX_STATIC_CAST
-dnl we don't use HAVE_DYNAMIC_CAST anywhere right now...
-dnl AC_CXX_DYNAMIC_CAST
-
dnl With Sun CC, temporaries have block scope by default. This flag is needed
dnl to get the expression scope behaviour that conforms to the standard.
if test "x$SUNCXX" = xyes; then
CFLAGS="-erroff=E_NO_EXPLICIT_TYPE_GIVEN $CFLAGS"
fi
-dnl SGI mipsPro compiler gives this warning for "conversion from pointer to
-dnl same-sized integral type" even when there is an explicit cast and as there
-dnl is no way to turn it off and there are hundreds of these warnings in wx
-dnl sources, just turn it off for now
+dnl SGI mipsPro compiler version 7.4.4 and later (and maybe some earlier
+dnl versions too but it's known that 7.4.2 doesn't give this warning but does
+dnl instead warn about "unknown warning number 3970" which explains that we
+dnl don't want to do this for it) gives this warning for "conversion from
+dnl pointer to same-sized integral type" even when there is an explicit cast
+dnl and as there is no way to turn it off and there are hundreds of these
+dnl warnings in wx sources, just turn it off for now
dnl
dnl a better long term solution would be to use #pragma set/reset woff in
dnl wxPtrToUInt() and use it instead of casts elsewhere
if test "x$SGICC" = "xyes"; then
- CFLAGS="-woff 3970 $CFLAGS"
+ AC_CACHE_CHECK([if cc version is 7.4.4 or greater],
+ wx_cv_prog_sgicc744,
+ [
+ AC_TRY_COMPILE([],
+ [
+ #if _SGI_COMPILER_VERSION >= 744
+ chock me: mipsPro is 7.4.4 or later
+ #endif
+ ],
+ wx_cv_prog_sgicc744=no,
+ wx_cv_prog_sgicc744=yes
+ )
+ ]
+ )
+
+ if test "x$wx_cv_prog_sgicc744" = "xyes"; then
+ CFLAGS="-woff 3970 $CFLAGS"
+ fi
fi
if test "x$SGICXX" = "xyes"; then
- CXXFLAGS="-woff 3970 $CXXFLAGS"
+ AC_CACHE_CHECK([if CC version is 7.4.4 or greater],
+ wx_cv_prog_sgicxx744,
+ [
+ AC_LANG_PUSH(C++)
+ AC_TRY_COMPILE([],
+ [
+ #if _SGI_COMPILER_VERSION >= 744
+ chock me: mipsPro is 7.4.4 or later
+ #endif
+ ],
+ wx_cv_prog_sgicxx744=no,
+ wx_cv_prog_sgicxx744=yes
+ )
+ AC_LANG_POP()
+ ]
+ )
+
+ if test "x$wx_cv_prog_sgicxx744" = "xyes"; then
+ CXXFLAGS="-woff 3970 $CXXFLAGS"
+ fi
fi
dnl HP-UX c89/aCC compiler warnings
if test "x$HPCXX" = "xyes"; then
dnl 2340: "value copied to temporary, reference to temporary used": very
dnl painful as triggered by any occurrence of user-defined conversion
- CXXFLAGS="+W 2340 $CXXFLAGS"
+ dnl 4232: "conversion from 'Foo *' to a more strictly aligned type 'Bar *'
+ dnl may cause misaligned access": this might indicate a real problem
+ dnl but any use of GTK+ cast macros results in it so it's unusable
+ dnl for wxGTK code
+ CXXFLAGS="+W 2340,4232 $CXXFLAGS"
fi
dnl DEC/Compaq/HP cxx warnings
if test "$wx_cv_class_stdbasicstring" != yes; then
if test "$wxUSE_STL" = "yes"; then
AC_MSG_ERROR([Can't use --enable-stl without $std_string or std::basic_string<$char_type>])
- elif grep wxUSE_STD_STRING $wx_arg_cache_file >/dev/null; then
+ elif test "$wxUSE_STD_STRING" = "yes"; then
AC_MSG_ERROR([Can't use --enable-std_string without $std_string or std::basic_string<$char_type>])
else
AC_MSG_WARN([No $std_string or std::basic_string<$char_type>, switching to --disable-std_string])
[#include <iostream>])
if test "$wxUSE_STD_IOSTREAM" != "yes"; then
- if grep wxUSE_STD_IOSTREAM $wx_arg_cache_file >/dev/null; then
+ if test "$wxUSE_STD_IOSTREAM" = "yes"; then
AC_MSG_ERROR([Can't use --enable-std_iostreams without std::istream and std::ostream])
else
AC_MSG_WARN([No std::iostreams, switching to --disable-std_iostreams])
AC_DEFINE(HAVE_STD_STRING_COMPARE)
fi
- dnl check for hash_map and hash_set headers
- AC_CHECK_HEADER([hash_map],
- [AC_CACHE_CHECK([for standard hash_map and hash_set],
- wx_cv_class_stdhashmapset,
- [AC_TRY_COMPILE([#include <hash_map>
- #include <hash_set>],
- [std::hash_map<double*, char*, std::hash<double*>, std::equal_to<double*> > test1;
- std::hash_set<char*, std::hash<char*>, std::equal_to<char*> > test2;],
- wx_cv_class_stdhashmapset=yes,
- wx_cv_class_stdhashmapset=no)
- ]
- )],
- [],
- [ ]
- )
-
- if test "$wx_cv_class_stdhashmapset" = yes; then
- AC_DEFINE(HAVE_HASH_MAP)
- AC_DEFINE(HAVE_STD_HASH_MAP)
+ if test "$wx_cv_class_gnuhashmapset" = yes; then
+ AC_DEFINE(HAVE_EXT_HASH_MAP)
+ AC_DEFINE(HAVE_GNU_CXX_HASH_MAP)
fi
- AC_CHECK_HEADER([ext/hash_map],
- [AC_CACHE_CHECK([for GNU hash_map and hash_set],
- wx_cv_class_gnuhashmapset,
- [AC_TRY_COMPILE([#include <ext/hash_map>
- #include <ext/hash_set>],
- [__gnu_cxx::hash_map<double*, char*, __gnu_cxx::hash<double*>, std::equal_to<double*> > test1;
- __gnu_cxx::hash_set<char*, __gnu_cxx::hash<char*>, std::equal_to<char*> > test2;],
- wx_cv_class_gnuhashmapset=yes,
- wx_cv_class_gnuhashmapset=no)
+ AC_CHECK_HEADER([unordered_map],
+ [AC_CACHE_CHECK([for unordered_map and unordered_set in std],
+ wx_cv_class_stdunorderedmapset,
+ [AC_TRY_COMPILE([#include <unordered_map>
+ #include <unordered_set>],
+ [std::unordered_map<double*, char*> test1;
+ std::unordered_set<char*> test2;],
+ wx_cv_class_stdunorderedmapset=yes,
+ wx_cv_class_stdunorderedmapset=no)
]
)],
[],
[ ]
)
- if test "$wx_cv_class_gnuhashmapset" = yes; then
- AC_DEFINE(HAVE_EXT_HASH_MAP)
- AC_DEFINE(HAVE_GNU_CXX_HASH_MAP)
+ if test "$wx_cv_class_stdunorderedmapset" = yes; then
+ AC_DEFINE(HAVE_STD_UNORDERED_MAP)
+ AC_DEFINE(HAVE_STD_UNORDERED_SET)
+ else
+ AC_CHECK_HEADER([tr1/unordered_map],
+ [AC_CACHE_CHECK([for unordered_map and unordered_set in std::tr1],
+ wx_cv_class_tr1unorderedmapset,
+ [AC_TRY_COMPILE([#include <tr1/unordered_map>
+ #include <tr1/unordered_set>],
+ [std::tr1::unordered_map<double*, char*> test1;
+ std::tr1::unordered_set<char*> test2;
+ #if defined(__GNUC__) && (__GNUC__==4) && (__GNUC_MINOR__<2)
+ #error can't use unordered_{map,set} with gcc-4.[01]: http://gcc.gnu.org/PR24389
+ #endif],
+ wx_cv_class_tr1unorderedmapset=yes,
+ wx_cv_class_tr1unorderedmapset=no)
+ ]
+ )],
+ [],
+ [ ]
+ )
+
+ if test "$wx_cv_class_tr1unorderedmapset" = yes; then
+ AC_DEFINE(HAVE_TR1_UNORDERED_MAP)
+ AC_DEFINE(HAVE_TR1_UNORDERED_SET)
+ else
+ dnl check for hash_map and hash_set headers
+ AC_CHECK_HEADER([hash_map],
+ [AC_CACHE_CHECK([for std::hash_map and hash_set],
+ wx_cv_class_stdhashmapset,
+ [AC_TRY_COMPILE([#include <hash_map>
+ #include <hash_set>],
+ [std::hash_map<double*, char*, std::hash<double*>, std::equal_to<double*> > test1;
+ std::hash_set<char*, std::hash<char*>, std::equal_to<char*> > test2;],
+ wx_cv_class_stdhashmapset=yes,
+ wx_cv_class_stdhashmapset=no)
+ ]
+ )],
+ [],
+ [ ]
+ )
+
+ if test "$wx_cv_class_stdhashmapset" = yes; then
+ AC_DEFINE(HAVE_HASH_MAP)
+ AC_DEFINE(HAVE_STD_HASH_MAP)
+ fi
+
+ AC_CHECK_HEADER([ext/hash_map],
+ [AC_CACHE_CHECK([for GNU hash_map and hash_set],
+ wx_cv_class_gnuhashmapset,
+ [AC_TRY_COMPILE([#include <ext/hash_map>
+ #include <ext/hash_set>],
+ [__gnu_cxx::hash_map<double*, char*, __gnu_cxx::hash<double*>, std::equal_to<double*> > test1;
+ __gnu_cxx::hash_set<char*, __gnu_cxx::hash<char*>, std::equal_to<char*> > test2;],
+ wx_cv_class_gnuhashmapset=yes,
+ wx_cv_class_gnuhashmapset=no)
+ ]
+ )],
+ [],
+ [ ]
+ )
+
+ fi
fi
fi
+AC_CHECK_HEADERS([type_traits tr1/type_traits])
+
+dnl check for atomic operations builtins for wx/atomic.h:
+WX_ATOMIC_BUILTINS
+
dnl pop C++
AC_LANG_POP()
dnl systems which have both (AIX 4.x does)
SEARCH_INCLUDE="\
/usr/local/include \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ /usr/local/X11R7/include \
+ /usr/local/X11R6/include \
+ /usr/local/include/X11R7 \
+ /usr/local/include/X11R6 \
\
/usr/Motif-2.1/include \
/usr/Motif-1.2/include \
\
/usr/include/Xm \
\
+ /usr/X11R7/include \
/usr/X11R6/include \
/usr/X11R6.4/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
\
+ /usr/include/X11R7 \
/usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
\
/usr/X11/include \
/usr/include/X11 \
- /usr/local/X11/include \
- /usr/local/include/X11 \
\
/usr/XFree86/include/X11 \
/usr/pkg/include \
\
+ /usr/local/X1R5/include \
+ /usr/local/include/X11R5 \
+ /usr/X11R5/include \
+ /usr/include/X11R5 \
+ \
+ /usr/local/X11R4/include \
+ /usr/local/include/X11R4 \
+ /usr/X11R4/include \
+ /usr/include/X11R4 \
+ \
/usr/openwin/share/include"
dnl try to find out the standard lib locations for the systems with multiple
AC_DEFINE(wxUSE_REGEX)
if test "$wxUSE_UNICODE" = "yes" -a "$wxUSE_REGEX" = "yes"; then
- AC_MSG_WARN([Defaulting to the the builtin regex library for Unicode build.])
+ AC_MSG_WARN([Defaulting to the builtin regex library for Unicode build.])
wxUSE_REGEX=builtin
fi
AC_CHECK_HEADER(png.h,,, [ ])
if test "$ac_cv_header_png_h" = "yes"; then
- AC_CHECK_LIB(png, png_check_sig, PNG_LINK=" -lpng -lz", , [-lz -lm])
+ AC_CHECK_LIB(png, png_sig_cmp, PNG_LINK=" -lpng -lz", , [-lz -lm])
fi
if test "x$PNG_LINK" = "x" ; then
fi
fi
fi
-
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS png"
fi
dnl ------------------------------------------------------------------------
dnl Check for jpeg library
dnl ------------------------------------------------------------------------
+dnl this check must be done before the check for libtiff as libtiff uses
+dnl libjpeg itself
JPEG_LINK=
if test "$wxUSE_LIBJPEG" != "no" ; then
AC_DEFINE(wxUSE_LIBJPEG)
wxUSE_LIBTIFF=sys
fi
fi
+ if test "$wxUSE_LIBTIFF" = "builtin" ; then
+ if test "$wxUSE_LIBJPEG" = "no"; then
+ dnl we have to prevent the builtin libtiff configure from building the
+ dnl library with JPEG support as this was explicitly disabled by user,
+ dnl but unfortunately it needs --disable-jpeg and not --without-libjpeg
+ dnl (which will be passed to it anyhow as configure passes arguments to
+ dnl the top-level script to all the other ones called recursively), so
+ dnl we need to hack around this
+ ac_configure_args="$ac_configure_args --disable-jpeg"
+ fi
+ AC_CONFIG_SUBDIRS([src/tiff])
+ fi
fi
dnl ------------------------------------------------------------------------
dnl Check for expat libraries
dnl ------------------------------------------------------------------------
-if test "$wxUSE_WCHAR_T" != "yes"; then
- if test "$wxUSE_EXPAT" != "no"; then
- AC_MSG_WARN([wxWidgets requires wchar_t to use expat, disabling])
- wxUSE_EXPAT=no
- fi
- if test "$wxUSE_XML" != "no"; then
- AC_MSG_WARN([wxWidgets requires wchar_t to use xml, disabling])
- wxUSE_XML=no
- fi
-fi
-
if test "$wxUSE_EXPAT" != "no"; then
wxUSE_XML=yes
AC_DEFINE(wxUSE_EXPAT)
dnl are we building for a win32 target environment?
dnl If so, setup common stuff needed for both GUI and Base libs.
if test "$USE_WIN32" = 1 ; then
- AC_CHECK_HEADER(w32api.h,,, [ ])
+ AC_CHECK_HEADERS(w32api.h,,, [ ])
AC_CHECK_HEADER(windows.h,,
[
AC_MSG_ERROR(please set CFLAGS to contain the location of windows.h)
],
[ ])
- dnl --- FIXME: This is still a somewhat random list of libs,
- dnl --- some of them should probably be included conditionally.
- LIBS="$LIBS -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lctl3d32 -ladvapi32 -lwsock32 -lgdi32"
-
+ LIBS="$LIBS -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -ladvapi32 -lwsock32 -lgdi32"
+ case "${host}" in
+ x86_64-*-mingw32* )
+ dnl we need to define this to embed the manifest for correct
+ dnl platform from wx/msw/wx.rc (this is not needed for x86 which is
+ dnl the default in wx/msw/rcdefs.h)
+ WINDRES_CPU_DEFINE="--define WX_CPU_AMD64"
+ ;;
+ esac
if test "$wxUSE_ACCESSIBILITY" = "yes" ; then
LIBS="$LIBS -loleacc"
fi
LIBS="$LIBS -lkernel32 -luser32"
esac
- dnl add extra odbc libs if we have compiled in odbc
- if test "$wxUSE_ODBC" = "sys" ; then
- wxUSE_ODBC = "yes"
- fi
- if test "$wxUSE_ODBC" = "yes" ; then
- LIBS=" -lodbc32 -lole32 -loleaut32 $LIBS"
- AC_DEFINE(wxUSE_ODBC)
- fi
- dnl We might want to abort here if wxUSE_ODBC="builtin" isn't supported on msw.
-
dnl This one is still used by some sample makefiles.
- RESFLAGS="--include-dir \$(top_srcdir)/include --include-dir \$(top_srcdir)/\$(program_dir) --define __WIN32__ --define __WIN95__ --define __GNUWIN32__"
+ RESFLAGS="--include-dir \$(top_srcdir)/include --include-dir \$(top_srcdir)/\$(program_dir) --define __WIN32__ --define __WIN95__ --define __GNUWIN32__ $WINDRES_CPU_DEFINE"
RESPROGRAMOBJ="\$(PROGRAM)_resources.o"
dnl This lot we export to wx-config. It must add the relevant
dnl include directories at the point when they can be known.
dnl (but are these (still) required anyway?)
- WXCONFIG_RESFLAGS="--define __WIN32__ --define __WIN95__ --define __GNUWIN32__"
+ WXCONFIG_RESFLAGS="--define __WIN32__ --define __WIN95__ --define __GNUWIN32__ $WINDRES_CPU_DEFINE"
dnl install Win32-specific files in "make install"
WIN32INSTALL=win32install
dnl pbt.h is missing on Wine at least
- AC_CHECK_HEADER(pbt.h,, [AC_DEFINE(NEED_PBT_H)], [ ])
+ AC_CHECK_HEADER([pbt.h],, [AC_DEFINE(NEED_PBT_H)], [ ])
fi
if test "$wxUSE_GUI" = "yes"; then
WXGTK12=
WXGTK127=
- WXGTK20=
+ WXGTK2=
WXGPE=
- if test "$wxUSE_COCOA" = 1 ; then
+ if test "$wxUSE_OLD_COCOA" = 1 ; then
if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes"; then
AC_MSG_WARN([Printing not supported under wxCocoa yet, disabled])
wxUSE_PRINTING_ARCHITECTURE=no
wx_cv_lib_gtk=
if test "x$wxGTK_VERSION" != "x1"
then
- dnl The gthread.pc that ships with solaris returns '-mt',
+ dnl The gthread.pc that ships with Solaris returns '-mt',
dnl it's correct for Sun CC, but gcc requires '-pthreads'.
dnl So disable the compile check and remove the -mt below.
case "${host}" in
*-*-solaris2* )
if test "$wxUSE_THREADS" = "yes" -a "$GCC" = yes; then
- enable_gtktest=no
+ enable_gtktest=no
fi
esac
- AM_PATH_GTK_2_0(2.0.0, wx_cv_lib_gtk=2.0, , $GTK_MODULES)
+ AM_PATH_GTK_2_0(2.4.0, wx_cv_lib_gtk=2.0, , $GTK_MODULES)
- dnl Remove the '-mt' for gcc on solaris
+ dnl Solaris also requires -lX11 for static lib
case "${host}" in
*-*-solaris2* )
- if test "$wxUSE_THREADS" = "yes" -a "$GCC" = yes; then
- GTK_CFLAGS=`echo $GTK_CFLAGS | sed 's/-mt//'`
- GTK_LIBS=`echo $GTK_LIBS | sed 's/-mt//'`
- fi
- dnl solaris also requires -lX11 for static lib
if test "$wxUSE_SHARED" != "yes"; then
GTK_LIBS="$GTK_LIBS -lX11"
fi
dnl we need to cache GTK_CFLAGS and GTK_LIBS for the
dnl subsequent runs
wx_cv_cflags_gtk=$GTK_CFLAGS
- wx_cv_libs_gtk=`echo $GTK_LIBS | sed -e 's/ -l[[^ ]]*cairo[[^ ]]*//g'`
+ wx_cv_libs_gtk=$GTK_LIBS
fi
]
)
fi
case "$wx_cv_lib_gtk" in
- 2.0) WXGTK20=1
+ 2.0) WXGTK2=1
TOOLKIT_VERSION=2
;;
1.2.7) WXGTK127=1
;;
esac
- if test "$WXGTK20" = 1; then
+ if test "$WXGTK2" = 1; then
save_CFLAGS="$CFLAGS"
save_LIBS="$LIBS"
CFLAGS="$wx_cv_cflags_gtk $CFLAGS"
LIBS="$LIBS $wx_cv_libs_gtk"
- dnl gtk_icon_size_lookup is not available in the GTK+ headers
- dnl that have shipped with some versions of Sun's JDS. Not using
- dnl AC_CHECK_FUNCS here since it only checks the function exists
- dnl in the lib (not the header).
- AC_CHECK_DECLS([gtk_icon_size_lookup], [],
- [AC_DEFINE(NEED_GTK_ICON_SIZE_LOOKUP)],
- [#include <gtk/gtk.h>])
-
-
- dnl test if we have at least GTK+ 2.10:
- AC_MSG_CHECKING([if GTK+ is version >= 2.10])
+ dnl test if we have at least GTK+ 2.18:
+ AC_MSG_CHECKING([if GTK+ is version >= 2.18])
AC_TRY_COMPILE([
#include <gtk/gtk.h>
],
[
- #if !GTK_CHECK_VERSION(2,10,0)
- Not GTK+ 2.10
+ #if !GTK_CHECK_VERSION(2,18,0)
+ Not GTK+ 2.18
#endif
],
[
+ AC_DEFINE(__WXGTK218__)
AC_DEFINE(__WXGTK210__)
AC_DEFINE(__WXGTK26__)
- AC_DEFINE(__WXGTK24__)
AC_MSG_RESULT([yes])
- ac_wxgtk210=1
+ ac_wxgtk218=1
],
[
AC_MSG_RESULT([no])
- ac_wxgtk210=0
+ ac_wxgtk218=0
])
- if test "$ac_wxgtk210" = 0; then
- dnl test if we have at least GTK+ 2.6:
- AC_MSG_CHECKING([if GTK+ is version >= 2.6])
+ if test "$ac_wxgtk218" = 0; then
+ dnl test if we have at least GTK+ 2.10:
+ AC_MSG_CHECKING([if GTK+ is version >= 2.10])
AC_TRY_COMPILE([
#include <gtk/gtk.h>
- ],
- [
- #if !GTK_CHECK_VERSION(2,6,0)
- Not GTK+ 2.6
+ ],
+ [
+ #if !GTK_CHECK_VERSION(2,10,0)
+ Not GTK+ 2.10
#endif
- ],
- [
+ ],
+ [
+ AC_DEFINE(__WXGTK210__)
AC_DEFINE(__WXGTK26__)
- AC_DEFINE(__WXGTK24__)
- AC_MSG_RESULT([yes])
- ac_wxgtk26=1
- ],
- [
- AC_MSG_RESULT([no])
- ac_wxgtk26=0
- ])
- fi
-
- if test "$ac_wxgtk26" = 0; then
- dnl test if we have at least GTK+ 2.4:
- AC_MSG_CHECKING([if GTK+ is version >= 2.4])
- AC_TRY_COMPILE([
- #include <gtk/gtk.h>
- ],
- [
- #if !GTK_CHECK_VERSION(2,4,0)
- Not GTK+ 2.4
- #endif
- ],
- [
- AC_DEFINE(__WXGTK24__)
AC_MSG_RESULT([yes])
- ],
- [
+ ac_wxgtk210=1
+ ],
+ [
AC_MSG_RESULT([no])
- ])
+ ac_wxgtk210=0
+ ])
+
+ if test "$ac_wxgtk210" = 0; then
+ dnl test if we have at least GTK+ 2.6:
+ AC_MSG_CHECKING([if GTK+ is version >= 2.6])
+ AC_TRY_COMPILE([
+ #include <gtk/gtk.h>
+ ],
+ [
+ #if !GTK_CHECK_VERSION(2,6,0)
+ Not GTK+ 2.6
+ #endif
+ ],
+ [
+ AC_DEFINE(__WXGTK26__)
+ AC_MSG_RESULT([yes])
+ ac_wxgtk26=1
+ ],
+ [
+ AC_MSG_RESULT([no])
+ ac_wxgtk26=0
+ ])
+ fi
fi
CFLAGS="$save_CFLAGS"
TOOLKIT_INCLUDE="$wx_cv_cflags_gtk"
GUI_TK_LIBRARY="$wx_cv_libs_gtk $GUI_TK_LIBRARY"
+ dnl disable GTK runtime type checks
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -DG_DISABLE_CAST_CHECKS"
+
AFMINSTALL=afminstall
TOOLKIT=GTK
GUIDIST=GTK_DIST
fi
if test "$wxUSE_MOTIF" = 1; then
- if test "$wxUSE_UNICODE" = "yes"; then
- AC_MSG_ERROR([Unicode configuration not supported with Motif])
- fi
-
AC_MSG_CHECKING(for Motif/Lesstif headers)
WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, Xm/Xm.h)
if test "$ac_find_includes" != "" ; then
libsm_ice_link=""
libs_found=0
for libp in "" " -lXp"; do
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = 0; then
for libsm_ice in "" " -lSM -lICE"; do
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = 0; then
save_LIBS="$LIBS"
LIBS="$GUI_TK_LIBRARY -lXm ${libp} -lXmu -lXext -lXt${libsm_ice} -lX11"
save_CFLAGS=$CFLAGS
fi
done
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = 0; then
AC_MSG_RESULT([can't find the right libraries])
AC_MSG_ERROR([can't link a simple motif program])
fi
fi
fi
- if test "$wxUSE_MAC" = 1; then
+ if test "$wxUSE_OSX_CARBON" = 1; then
AC_MSG_CHECKING([for compiler syntax to enable Pascal strings])
if test "$GCC" = yes; then
AC_MSG_RESULT([gcc])
fi
if test "x$wxUSE_UNIX" = "xyes"; then
- CPPFLAGS="$CPPFLAGS_PASCAL -I\${top_srcdir}/src/mac/carbon/morefilex -I/Developer/Headers/FlatCarbon $CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS_PASCAL -I/Developer/Headers/FlatCarbon $CPPFLAGS"
else
dnl platform.h needs TARGET_CARBON before setup.h
- CPPFLAGS="$CPPFLAGS_PASCAL -I\${top_srcdir}/src/mac/carbon/morefilex -DTARGET_CARBON $CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS_PASCAL -DTARGET_CARBON $CPPFLAGS"
fi
- TOOLKIT=MAC
+ TOOLKIT=OSX_CARBON
dnl we can't call this MAC_DIST or autoconf thinks its a macro
- GUIDIST=MACX_DIST
+ GUIDIST=OSX_CARBON_DIST
dnl wxMac version of wxBase and wxCocoa or wxBase-only built on Darwin
dnl are different, so they need different names:
WXBASEPORT="_carbon"
+
+ dnl in addition to defining __WXOSX_CARBON__ for this toolkit we want
+ dnl to also define these extra symbols to make it possible to test for
+ dnl any Mac port (__WXMAC__ is for backwards compatibility, __WXOSX__
+ dnl is a new name)
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXMAC__ -D__WXOSX__"
+ fi
+
+ if test "$wxUSE_OSX_COCOA" = 1; then
+ TOOLKIT=OSX_COCOA
+ GUIDIST=OSX_COCOA_DIST
+
+ dnl see the comment above in wxUSE_OSX_CARBON branch
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXMAC__ -D__WXOSX__"
+ fi
+
+ if test "$wxUSE_OSX_IPHONE" = 1; then
+ TOOLKIT=OSX_IPHONE
fi
- if test "$wxUSE_COCOA" = 1; then
+ if test "$wxUSE_OLD_COCOA" = 1; then
TOOLKIT=COCOA
GUIDIST=COCOA_DIST
fi
if test "$TOOLKIT" = "PM" ; then
TOOLKIT_DIR="os2"
else
- TOOLKIT_DIR=`echo ${TOOLKIT} | tr "[[A-Z]]" "[[a-z]]"`
+ TOOLKIT_DIR=`echo ${TOOLKIT} | tr '[[A-Z]]' '[[a-z]]'`
fi
if test "$wxUSE_UNIVERSAL" = "yes"; then
DISTDIR="wxBase"
fi
+
+dnl ---------------------------------------------------------------------------
+dnl UTF-8 support
+dnl ---------------------------------------------------------------------------
+
+dnl If UTF-8 support wasn't explicitly enabled or disabled, enable it only
+dnl for ports where it makes sense by default (GTK+, DirectFB):
+if test "$wxUSE_UNICODE" = "yes" -a "$wxUSE_UNICODE_UTF8" = "auto" ; then
+ if test "$USE_UNIX" = 1 -a "$wxUSE_DARWIN" != 1 ; then
+ wxUSE_UNICODE_UTF8=yes
+ elif test "$USE_OS2" = 1 ; then
+ dnl wide char support is quite incomplete in libc;
+ dnl UTF-8 might actually work when evaluating/setting
+ dnl code pages correctly, even for ports other than GTK20.
+ wxUSE_UNICODE_UTF8=yes
+ else
+ wxUSE_UNICODE_UTF8=no
+ fi
+fi
+
dnl ---------------------------------------------------------------------------
dnl Optional libraries included when system library is not used
dnl ---------------------------------------------------------------------------
if test "$wxUSE_GUI" = "yes"; then
if test "$wxUSE_UNIX" = "yes" -a "$wxUSE_PM" != 1; then
dnl defines HAVE_X11_XKBLIB_H
- AC_CHECK_HEADER(X11/Xlib.h,,, [ ])
- AC_CHECK_HEADER([X11/XKBlib.h],,,
+ AC_CHECK_HEADERS([X11/Xlib.h],,, [ ])
+ AC_CHECK_HEADERS([X11/XKBlib.h],,,
[
#if HAVE_X11_XLIB_H
#include <X11/Xlib.h>
fi
-dnl ----------------------------------------------------------------
-dnl iODBC support
-dnl ----------------------------------------------------------------
-
-IODBC_C_SRC=""
-
-
-dnl ODBC is handled separately for MSW
-if test "$TOOLKIT" != "MSW" ; then
-
- if test "$wxUSE_ODBC" = "sys" -o "$wxUSE_ODBC" = "yes" ; then
- dnl This is not ideal we really ough to use the unixodbc-config
- dnl or iodbc-config if they exist.
-
- AC_CHECK_HEADER([sql.h], [found_sql_h=1],, [ ])
- if test "x$found_sql_h" = "x1" ; then
- AC_CHECK_LIB(iodbc, SQLAllocEnv, ODBC_LINK=" -liodbc",
- [
- AC_CHECK_LIB(unixodbc, SQLAllocEnv, ODBC_LINK=" -lunixodbc",
- [
- AC_CHECK_LIB(odbc, SQLAllocEnv, ODBC_LINK=" -lodbc")
- ])
- ])
- fi
- if test "x$ODBC_LINK" = "x" ; then
- if test "$wxUSE_ODBC" = "sys" ; then
- AC_MSG_ERROR([system ODBC library not found! Use --with-odbc=builtin to use built-in version])
- else
- AC_MSG_WARN([system ODBC library not found, will use built-in instead])
- wxUSE_ODBC=builtin
- fi
- else
- dnl we are using the system library
- wxUSE_ODBC=sys
- fi
- fi
-
- if test "$wxUSE_ODBC" = "builtin" ; then
- AC_DEFINE(wxUSE_BUILTIN_IODBC)
- fi
-fi
-
-if test "$wxUSE_ODBC" != "no" ; then
- AC_DEFINE(wxUSE_ODBC)
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS db"
-
- dnl is this still necessary?
- WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D_IODBC_"
-fi
-
dnl ---------------------------------------------------------------------------
-dnl wxDisplay Sanity checks
+dnl wxDisplay checks
dnl ---------------------------------------------------------------------------
+USE_XINERAMA=0
if test "$wxUSE_DISPLAY" = "yes"; then
-dnl ---------------------------------------------------------------------------
-dnl Xinerama (for unix ) - Brian Victor
-dnl ---------------------------------------------------------------------------
- if test "$wxUSE_UNIX" = "yes" -a "$wxUSE_MAC" != 1 -a "$wxUSE_COCOA" != 1; then
+ dnl Xinerama is used for wxGTK1/wxX11/wxMotif only
+ if test "$wxUSE_MOTIF" = 1 -o "$wxUSE_X11" = 1 -o "$wxUSE_GTK1" = 1; then
AC_MSG_CHECKING([for Xinerama])
WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],Xinerama)
if test "$ac_find_libraries" != "" ; then
if test "$ac_path_to_link" != " -L/usr/lib" ; then
LDFLAGS="$LDFLAGS $ac_path_to_link"
fi
+ USE_XINERAMA=1
GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lXinerama"
AC_MSG_RESULT([yes])
-
- AC_MSG_CHECKING([for Xxf86vm extension])
- WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],Xxf86vm)
- if test "$ac_find_libraries" != "" ; then
- AC_MSG_RESULT([yes])
- AC_CHECK_HEADER([X11/extensions/xf86vmode.h],
- [
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lXxf86vm"
- ],
- [],
- [
- #if HAVE_X11_XLIB_H
- #include <X11/Xlib.h>
- #endif
- ])
- else
- AC_MSG_RESULT([no])
- fi
-
else
AC_MSG_RESULT([no])
AC_MSG_WARN([Xinerama not found; disabling wxDisplay])
wxUSE_DISPLAY="no"
fi
elif test "$wxUSE_MSW" = 1; then
-dnl ---------------------------------------------------------------------------
-dnl DirectDraw for MSW - optionally used by WxDisplay.
-dnl ---------------------------------------------------------------------------
+ dnl DirectDraw for MSW - optionally used by WxDisplay.
AC_CHECK_HEADER([ddraw.h], [], [], [#include <windows.h>])
fi
fi
+if test "$wxUSE_DISPLAY" = "yes"; then
+ dnl wxGTK2 needs Xxf86vm as well as Xinerama-using ports from above
+ if test "$USE_XINERAMA" = 1 -o "$wxUSE_GTK" = 1; then
+ AC_MSG_CHECKING([for Xxf86vm extension])
+ WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],Xxf86vm)
+ if test "$ac_find_libraries" != "" ; then
+ AC_MSG_RESULT([yes])
+ AC_CHECK_HEADERS([X11/extensions/xf86vmode.h],
+ [
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lXxf86vm"
+ ],
+ [],
+ [
+ #if HAVE_X11_XLIB_H
+ #include <X11/Xlib.h>
+ #endif
+ ])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ fi
+fi
+
dnl ---------------------------------------------------------------------------
dnl X11 session management
dnl ---------------------------------------------------------------------------
if test "$wxUSE_DETECT_SM" = "yes"; then
- if test "$wxUSE_UNIX" = "yes" -a "$wxUSE_MAC" != 1 -a "$wxUSE_COCOA" != 1; then
+ if test "$wxUSE_UNIX" = "yes" -a "$wxUSE_MAC" != 1 -a "$wxUSE_OLD_COCOA" != 1; then
AC_MSG_CHECKING([for -lSM - X11 session management])
WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],SM)
if test "$ac_find_libraries" != "" ; then
dnl ---------------------------------------------------------------------------
USE_OPENGL=0
-if test "$wxUSE_OPENGL" = "yes"; then
- if test "$wxUSE_MGL" = 1 -o "$wxUSE_DFB" = "1"; then
- AC_MSG_WARN([wxGLCanvas not implemented for this port, library will be compiled without it.])
- wxUSE_OPENGL="no"
- elif test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = "1"; then
+if test "$wxUSE_OPENGL" = "yes" -o "$wxUSE_OPENGL" = "auto"; then
+
+ dnl look in glcanvas.h for the list of platforms supported by wxGlCanvas:
+
+ if test "$wxUSE_OSX_CARBON" = 1 -o "$wxUSE_OSX_COCOA" = 1 -o "$wxUSE_OLD_COCOA" = 1; then
OPENGL_LIBS="-framework OpenGL -framework AGL"
elif test "$wxUSE_MSW" = 1; then
OPENGL_LIBS="-lopengl32 -lglu32"
- else
+ elif test "$wxUSE_MOTIF" = 1 -o "$wxUSE_X11" = 1 -o "$wxUSE_GTK2" = 1 -o "$wxUSE_GTK" = 1; then
+
dnl adjust CPPFLAGS to include GL/gl.h location if necessary
dnl (/opt/graphics/OpenGL is for HP-UX systems, bug 925307)
AC_MSG_CHECKING([for OpenGL headers])
AC_MSG_RESULT([no])
fi
fi
- ])
+ ],, [ ])
],
[],
[ ])
if test "x$OPENGL_LIBS" = "x"; then
- dnl it should be an error and not a warning because OpenGL is not on
- dnl by default and so if it had been explicitly requested, we
- dnl shouldn't just fall back to compiling the library without it
- AC_MSG_ERROR(OpenGL libraries not available)
+ if test "$wxUSE_OPENGL" = "yes"; then
+ AC_MSG_ERROR([OpenGL libraries not available])
+ else
+ dnl case wxUSE_OPENGL=auto
+ AC_MSG_WARN([OpenGL libraries not available, disabling support for OpenGL])
+ wxUSE_OPENGL=no
+ USE_OPENGL=0
+ fi
fi
+ else
+ AC_MSG_WARN([wxGLCanvas not implemented for this port, library will be compiled without it.])
+ wxUSE_OPENGL="no"
+ fi
+
+ if test "$wxUSE_OPENGL" = "auto"; then
+ dnl if the OpenGL libraries were unavailable, this would have been
+ dnl changed to "no" above, if it wasn't, change it to "yes" as we've
+ dnl verified that we can indeed use OpenGL
+ wxUSE_OPENGL=yes
fi
if test "$wxUSE_OPENGL" = "yes"; then
dnl use versioned symbols if available on the platform
WX_VERSIONED_SYMBOLS([\$(wx_top_builddir)/version-script])
+ dnl test for GCC's visibility support (sets CFLAGS_VISIBILITY, which is
+ dnl assigned to CFLAGS and CXXFLAGS below)
+ if test "$wxUSE_VISIBILITY" != "no"; then
+ WX_VISIBILITY
+ fi
+
+ dnl test for Sun CC which can be used under both Solaris and Linux
+ if test "x$SUNCXX" = xyes; then
+ SAMPLES_RPATH_FLAG="-R\$(wx_top_builddir)/lib"
+ WXCONFIG_RPATH="-R\$libdir"
+ else
case "${host}" in
*-*-linux* | *-*-gnu* )
SAMPLES_RPATH_FLAG="-Wl,-rpath,\$(wx_top_builddir)/lib"
;;
*-*-solaris2* )
- if test "$GCC" = yes ; then
- dnl newer versions of gcc need -isystem to compile X headers on
- dnl Solaris (which use old style C syntax)
- CPPFLAGS="-isystem /usr/openwin/include $CPPFLAGS"
-
- dnl gcc may use Sun's ld, in which case -rpath gives a confusing
- dnl error message. We have to try both -Wl,-rpath and -Wl,-R:
- saveLdflags="$LDFLAGS"
- LDFLAGS="$saveLdflags -Wl,-rpath,/"
- AC_MSG_CHECKING([if the linker accepts -rpath])
- AC_TRY_LINK(
- [],[],
- [
- AC_MSG_RESULT([yes])
- SAMPLES_RPATH_FLAG="-Wl,-rpath,\$(wx_top_builddir)/lib"
- WXCONFIG_RPATH="-Wl,-rpath,\$libdir"
- ],[
- AC_MSG_RESULT([no])
- AC_MSG_CHECKING([if the linker accepts -R])
- LDFLAGS="$saveLdflags -Wl,-R,/"
- AC_TRY_LINK(
- [],[],
- [
- AC_MSG_RESULT([yes])
- SAMPLES_RPATH_FLAG="-Wl,-R,\$(wx_top_builddir)/lib"
- WXCONFIG_RPATH="-Wl,-R,\$libdir"
- ],[
- AC_MSG_RESULT([no])
- ])
- ])
- LDFLAGS="$saveLdflags"
- else
- SAMPLES_RPATH_FLAG="-R\$(wx_top_builddir)/lib"
- WXCONFIG_RPATH="-R\$libdir"
- fi
+ dnl here we know that Sun CC is not used as we tested for it above,
+ dnl hence we must be using gcc
+
+ dnl newer versions of gcc need -isystem to compile X headers on
+ dnl Solaris (which use old style C syntax)
+ CPPFLAGS="-isystem /usr/openwin/include $CPPFLAGS"
+
+ dnl gcc may use Sun's ld, in which case -rpath gives a confusing
+ dnl error message. We have to try both -Wl,-rpath and -Wl,-R:
+ saveLdflags="$LDFLAGS"
+ LDFLAGS="$saveLdflags -Wl,-rpath,/"
+ AC_MSG_CHECKING([if the linker accepts -rpath])
+ AC_TRY_LINK(
+ [],[],
+ [
+ AC_MSG_RESULT([yes])
+ SAMPLES_RPATH_FLAG="-Wl,-rpath,\$(wx_top_builddir)/lib"
+ WXCONFIG_RPATH="-Wl,-rpath,\$libdir"
+ ],[
+ AC_MSG_RESULT([no])
+ AC_MSG_CHECKING([if the linker accepts -R])
+ LDFLAGS="$saveLdflags -Wl,-R,/"
+ AC_TRY_LINK(
+ [],[],
+ [
+ AC_MSG_RESULT([yes])
+ SAMPLES_RPATH_FLAG="-Wl,-R,\$(wx_top_builddir)/lib"
+ WXCONFIG_RPATH="-Wl,-R,\$libdir"
+ ],[
+ AC_MSG_RESULT([no])
+ ])
+ ])
+ LDFLAGS="$saveLdflags"
;;
*-*-darwin* )
- install_name_tool=`which install_name_tool`
+ install_name_tool=`which ${HOST_PREFIX}install_name_tool`
if test "$install_name_tool" -a -x "$install_name_tool"; then
- SAMPLES_RPATH_POSTLINK="\$(wx_top_builddir)/change-install-names \$(LIBDIRNAME) \$(prefix) \$@"
+ DYLIB_RPATH_POSTLINK="${HOST_PREFIX}install_name_tool -id \$@ \$@"
cat <<EOF >change-install-names
#!/bin/sh
libnames=\`cd \${1} ; ls -1 | grep '\.[[0-9]][[0-9]]*\.dylib\$'\`
-inst_cmd="install_name_tool "
for i in \${libnames} ; do
- inst_cmd="\${inst_cmd} -change \${2}/lib/\${i} \${1}/\${i}"
+ ${HOST_PREFIX}install_name_tool -id \${1}/\${i} \${1}/\${i}
+ for dep in \${libnames} ; do
+ ${HOST_PREFIX}install_name_tool -change \${2}/\${dep} \${1}/\${dep} \${1}/\${i}
+ done
done
-\${inst_cmd} \${3}
EOF
chmod +x change-install-names
+ DYLIB_RPATH_INSTALL="\$(wx_top_builddir)/change-install-names \${libdir} \$(wx_top_builddir)/lib"
fi
+
+ dnl the HEADER_PAD_OPTION is required by some wx samples to avoid the error:
+ dnl "install_name_tool: changing install names can't be redone for: the_exe_name
+ dnl (for architecture ppc) because larger updated load commands do not fit
+ dnl (the program must be relinked)"
+ HEADER_PAD_OPTION="-headerpad_max_install_names"
;;
*-*-cygwin* | *-*-mingw32* )
- dnl this one shouldn't be used for the library build so put it in a
- dnl separate variable from WXCONFIG_CPPFLAGS
- WXCONFIG_ONLY_CPPFLAGS="$WXCONFIG_ONLY_CPPFLAGS -DWXUSINGDLL"
;;
*-*-hpux* )
;;
esac
+ fi
+
+ dnl this one shouldn't be used for the library build so put it in a
+ dnl separate variable from WXCONFIG_CPPFLAGS
+ WXCONFIG_ONLY_CPPFLAGS="$WXCONFIG_ONLY_CPPFLAGS -DWXUSINGDLL"
if test $wxUSE_RPATH = "no"; then
SAMPLES_RPATH_FLAG=''
- SAMPLES_RPATH_POSTLINK=''
+ DYLIB_PATH_POSTLINK=''
WXCONFIG_RPATH=''
fi
UNICODE=1
fi
-lib_debug_suffix=
-WX_DEBUGTYPE="release"
-DEBUG_FLAG=0
-if test "$wxUSE_DEBUG_FLAG" = "yes"; then
- lib_debug_suffix=d
- WX_DEBUGTYPE="debug"
- DEBUG_FLAG=1
-fi
-
WX_FLAVOUR=${WX_FLAVOUR:+-$WX_FLAVOUR}
WX_LIB_FLAVOUR=`echo $WX_FLAVOUR | tr '-' '_'`
DEBUG_INFO=1
fi
-WX_VERSION_TAG=`echo WX${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}_${WX_RELEASE} | tr "[[a-z]]" "[[A-Z]]"`
-
-TOOLCHAIN_NAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}"
+WX_VERSION_TAG=`echo WX${lib_unicode_suffix}${WX_LIB_FLAVOUR}_${WX_RELEASE} | tr '[[a-z]]' '[[A-Z]]'`
-TOOLCHAIN_FULLNAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}-${WX_CHARTYPE}-${WX_DEBUGTYPE}${config_linkage_component}-${WX_RELEASE}${WX_FLAVOUR}"
+TOOLCHAIN_NAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX}"
-if test "$cross_compiling" = "yes"; then
- HOST_SUFFIX="-$host_alias"
- TOOLCHAIN_NAME="$TOOLCHAIN_NAME$HOST_SUFFIX"
- TOOLCHAIN_FULLNAME="${host_alias}-$TOOLCHAIN_FULLNAME"
-fi
+TOOLCHAIN_FULLNAME="${HOST_PREFIX}${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}-${WX_CHARTYPE}${config_linkage_component}-${WX_RELEASE}${WX_FLAVOUR}"
dnl library link name
-dnl These just save us from exporting lib_{unicode,debug,flavour}_suffix.
+dnl These just save us from exporting lib_{unicode,flavour}_suffix.
dnl If we ever need to do that, we won't need to keep these.
-WX_LIBRARY_BASENAME_NOGUI="wx_base${WXBASEPORT}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}"
+
+if test "$wxUSE_OSX_CARBON" = 1 -o "$wxUSE_OSX_COCOA" = 1 -o "$wxUSE_OLD_COCOA" = 1; then
+ WX_LIBRARY_BASENAME_NOGUI="wx_base${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
+else
+ WX_LIBRARY_BASENAME_NOGUI="wx_base${WXBASEPORT}${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
+fi
if test "${TOOLKIT_DIR}" = "os2"; then
- WX_LIBRARY_BASENAME_GUI="wx_pm${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}"
+ WX_LIBRARY_BASENAME_GUI="wx_pm${WIDGET_SET}${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
else
- WX_LIBRARY_BASENAME_GUI="wx_${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}"
+ WX_LIBRARY_BASENAME_GUI="wx_${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
fi
-if test "$wxUSE_COCOA" = 1; then
+if test "$wxUSE_OLD_COCOA" = 1; then
AC_LANG_SAVE
AC_WX_LANG_OBJECTIVEC
dnl Recent AppKit/NSEvent.h include parts of IOKit which eventually
AC_LANG_RESTORE
fi
-if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1; then
- dnl base name of the resource file for wxMac must be the same
- dnl as library installation base name (-install_name)
- WX_RESOURCES_MACOSX_ASCII="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.r"
- WX_RESOURCES_MACOSX_DATA="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.rsrc"
-
- dnl add the resources target for wxMac
- LIBWXMACRES="\$(wx_top_builddir)/lib/${WX_RESOURCES_MACOSX_ASCII}"
-
- AC_CHECK_PROG(REZ, Rez, Rez, /Developer/Tools/Rez)
- AC_CHECK_PROG(DEREZ, DeRez, DeRez, /Developer/Tools/DeRez)
- AC_CHECK_PROG(SETFILE, SetFile, SetFile, /Developer/Tools/SetFile)
-
- MACSETFILE="\$(SETFILE)"
-
- dnl resources are bundled both with shared library and applications
- dnl since the carb resource *must* be included in the application
- if test "$wxUSE_MAC" = 1; then
- POSTLINK_COMMAND="\$(REZ) -d __DARWIN__ -t APPL Carbon.r -o"
- RESCOMP="$REZ"
- WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL Carbon.r -o"
- else
- POSTLINK_COMMAND="echo -n | \$(REZ) -d __DARWIN__ -t APPL ${LIBWXMACRES}"
- RESCOMP="echo -n \| $REZ"
- WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL \$libdir/$WX_RESOURCES_MACOSX_ASCII"
- fi
-
-else
- dnl default value is to (silently) do nothing in the makefile
- MACSETFILE="@true"
-
- if test "$wxUSE_PM" = 1; then
- RESCOMP="emxbind"
- WXCONFIG_RESFLAGS="-ep"
-
- dnl Is this one really used anywhere for pm?
- POSTLINK_COMMAND="$RESCOMP $WXCONFIG_RESFLAGS"
- else
- POSTLINK_COMMAND="@true"
- fi
-
-fi
-
-
dnl ---------------------------------------------------------------------------
dnl Checks for typedefs
dnl ---------------------------------------------------------------------------
AC_TYPE_PID_T
dnl defines size_t if not already defined
AC_TYPE_SIZE_T
-dnl defines uid_t and gid_t if not already defined
-AC_TYPE_UID_T
dnl sets HAVE_SSIZE_T if ssize_t is defined
AC_CHECK_TYPES(ssize_t)
fi
fi
+AC_CACHE_CHECK([if wchar_t is separate type],
+ wx_cv_wchar_t_is_separate_type,
+ AC_TRY_COMPILE([#include <wchar.h>],
+ [
+ return 0; }
+
+ struct Foo { void foo(wchar_t);
+ void foo(unsigned short);
+ void foo(unsigned int);
+ void foo(unsigned long); };
+
+ int bar() {
+ ],
+ wx_cv_wchar_t_is_separate_type=yes,
+ wx_cv_wchar_t_is_separate_type=no
+ )
+)
+
+if test "$wx_cv_wchar_t_is_separate_type" = "yes"; then
+ AC_DEFINE(wxWCHAR_T_IS_REAL_TYPE, 1)
+else
+ AC_DEFINE(wxWCHAR_T_IS_REAL_TYPE, 0)
+fi
+
AC_LANG_POP() dnl C++
dnl ---------------------------------------------------------------------------
dnl Check for functions
dnl ---------------------------------------------------------------------------
-dnl don't check for wchar_t functions if we haven't got wchar_t itself
-if test "$wxUSE_WCHAR_T" = "yes"; then
- AC_DEFINE(wxUSE_WCHAR_T)
+dnl check for wcslen in all possible places
+WCSLEN_FOUND=0
+WCHAR_LINK=
+AC_CHECK_FUNCS(wcslen, WCSLEN_FOUND=1)
- dnl check for wcslen in all possible places
- WCSLEN_FOUND=0
- WCHAR_LINK=
- AC_CHECK_FUNCS(wcslen, WCSLEN_FOUND=1)
-
- if test "$WCSLEN_FOUND" = 0; then
- if test "$TOOLKIT" = "MSW"; then
- AC_CHECK_LIB(msvcrt, wcslen, WCHAR_OK=1)
- else
- AC_CHECK_LIB(w, wcslen, [
- WCHAR_LINK=" -lw"
- WCSLEN_FOUND=1
- ])
- fi
+if test "$WCSLEN_FOUND" = 0; then
+ if test "$TOOLKIT" = "MSW"; then
+ AC_CHECK_LIB(msvcrt, wcslen, WCHAR_OK=1)
+ else
+ AC_CHECK_LIB(w, wcslen, [
+ WCHAR_LINK=" -lw"
+ WCSLEN_FOUND=1
+ ])
fi
+fi
- if test "$WCSLEN_FOUND" = 1; then
- AC_DEFINE(HAVE_WCSLEN)
- fi
+if test "$WCSLEN_FOUND" = 1; then
+ AC_DEFINE(HAVE_WCSLEN)
+fi
- dnl On HP-UX aCC need this define to find mbstrtowcs() &c
- dnl Can't be used for g++ since the mbstate_t in wchar.h can conflict
- dnl with g++'s in <cwchar> (unless -D_INCLUDE__STDC_A1_SOURCE is in the
- dnl flags when g++ is configured, it will declare it's own).
- if test "$USE_HPUX" = 1 -a "$GCC" != "yes"; then
- CPPFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CPPFLAGS"
- fi
+AC_CHECK_FUNCS([wcsdup wcsftime strnlen wcsnlen wcscasecmp wcsncasecmp])
- dnl Try to use wcsrtombs instead of wcstombs which is buggy in old GNU
- dnl libc versions if possible. AC_CHECK_FUNCS only checks it's in the
- dnl library, not the header, so do a header check for mbstate_t first.
- AC_CHECK_TYPES([mbstate_t],
- [AC_CHECK_FUNCS(wcsrtombs)],
- [],
- [#include <wchar.h>])
-else
- AC_MSG_WARN([Wide character support is unavailable])
+dnl On HP-UX aCC need this define to find mbstrtowcs() &c
+dnl Can't be used for g++ since the mbstate_t in wchar.h can conflict
+dnl with g++'s in <cwchar> (unless -D_INCLUDE__STDC_A1_SOURCE is in the
+dnl flags when g++ is configured, it will declare it's own).
+if test "$USE_HPUX" = 1 -a "$GCC" != "yes"; then
+ CPPFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CPPFLAGS"
fi
+dnl Try to use wcsrtombs instead of wcstombs which is buggy in old GNU
+dnl libc versions if possible. AC_CHECK_FUNCS only checks it's in the
+dnl library, not the header, so do a header check for mbstate_t first.
+AC_CHECK_TYPES([mbstate_t],
+ [AC_CHECK_FUNCS(wcsrtombs)],
+ [],
+ [#include <wchar.h>])
+
dnl check for vsnprintf() -- a safe version of vsprintf())
dnl
dnl the trouble here is that on some systems (e.g HP-UX 10) this function is
dnl so we first check if the function is in the library
dnl
dnl FIXME: replace this mess with WX_CHECK_FUNCS()
-AC_CHECK_FUNCS(snprintf vsnprintf)
+AC_CHECK_FUNCS(snprintf vsnprintf vsscanf)
+AC_LANG_PUSH(C++)
if test "$ac_cv_func_vsnprintf" = "yes"; then
dnl yes it is -- now check if it is in the headers
AC_CACHE_CHECK([for vsnprintf declaration], wx_cv_func_vsnprintf_decl,
if test "$wx_cv_func_snprintf_decl" = "yes"; then
AC_DEFINE(HAVE_SNPRINTF_DECL)
-
- dnl we know there is an snprintf declaration, but some old headers
- dnl may have one taking a "char *" format instead of "const char *"
- AC_CACHE_CHECK([if snprintf declaration is broken], wx_cv_func_broken_snprintf_decl,
- [
- AC_TRY_COMPILE(
- [
- #include <stdio.h>
- #include <stdarg.h>
- #ifdef __MSL__
- #if __MSL__ >= 0x6000
- namespace std {}
- using namespace std;
- #endif
- #endif
- ],
- [
- char *buf;
- const char *fmt = "%s";
- snprintf(buf, 10u, fmt, "wx");
- ],
- wx_cv_func_broken_snprintf_decl=no,
- wx_cv_func_broken_snprintf_decl=yes
- )
- ]
- )
-
- if test "$wx_cv_func_broken_snprintf_decl" = "yes"; then
- AC_DEFINE(HAVE_BROKEN_SNPRINTF_DECL)
- fi
fi
if test "$wxUSE_PRINTF_POS_PARAMS" = "yes"; then
]
)
- if test "$wx_cv_func_snprintf_pos_params" = "yes"; then
- AC_DEFINE(HAVE_UNIX98_PRINTF)
- fi
+ if test "$wx_cv_func_snprintf_pos_params" = "yes"; then
+ AC_DEFINE(HAVE_UNIX98_PRINTF)
+ fi
+ fi
+fi
+
+dnl the same as above but for vsscanf() now: it's not present in at least
+dnl Solaris 9 headers for gcc-3.4 (due to fixinclude's processing of stdio.h)
+if test "$ac_cv_func_vsscanf" = "yes"; then
+ AC_CACHE_CHECK([for vsscanf declaration], wx_cv_func_vsscanf_decl,
+ [
+ AC_TRY_COMPILE(
+ [
+ #include <stdio.h>
+ #include <stdarg.h>
+ #ifdef __MSL__
+ #if __MSL__ >= 0x6000
+ namespace std {}
+ using namespace std;
+ #endif
+ #endif
+ ],
+ [
+ char *buf;
+ va_list args;
+ vsscanf(buf, "%s", args);
+ ],
+ wx_cv_func_vsscanf_decl=yes,
+ wx_cv_func_vsscanf_decl=no
+ )
+ ]
+ )
+
+ if test "$wx_cv_func_vsscanf_decl" = "yes"; then
+ AC_DEFINE(HAVE_VSSCANF_DECL)
fi
fi
+AC_LANG_POP()
if test "$wxUSE_UNICODE" = yes; then
- dnl our wxVsnprintf() implementation needs to use the system swprintf() in Unicode
- dnl builds so let's check if swprintf() is declared as C99 imposes:
- dnl int swprintf(wchar_t *s, size_t n, const wchar_t *format, ...);
- dnl or rather as:
- dnl int swprintf(wchar_t *s, const wchar_t *format, ...);
- AC_CHECK_FUNCS(swprintf)
-
- if test "$ac_cv_func_swprintf" = "yes"; then
- AC_CACHE_CHECK([if swprintf declaration is broken], wx_cv_func_broken_swprintf_decl,
- [
- AC_TRY_COMPILE(
- [
- #include <stdio.h>
- #include <stdarg.h>
- #include <wchar.h>
- ],
- [
- wchar_t *buf;
- const wchar_t *fmt = L"test";
- swprintf(buf, 10u, fmt);
- ],
- wx_cv_func_broken_swprintf_decl=no,
- wx_cv_func_broken_swprintf_decl=yes
- )
- ]
- )
-
- if test "$wx_cv_func_broken_swprintf_decl" = "yes"; then
- AC_DEFINE(HAVE_BROKEN_SWPRINTF_DECL)
- fi
- fi
-
dnl also look if we have wide char IO functions, notice that [f]putws are
dnl declared in special widec.h under Solaris
wchar_headers="#include <stdio.h>
#include <wchar.h>"
case "${host}" in
*-*-solaris2* )
- AC_CHECK_HEADER(widec.h,,, [AC_INCLUDES_DEFAULT()])
+ AC_CHECK_HEADERS(widec.h,,, [AC_INCLUDES_DEFAULT()])
if test "$ac_cv_header_widec_h" = "yes"; then
wchar_headers="$wchar_headers
#include <widec.h>"
fi
esac
- WX_CHECK_FUNCS(wputc wputchar putws fputws wprintf vswprintf,,,
+ WX_CHECK_FUNCS(putws fputws wprintf vswprintf vswscanf,,,
[$wchar_headers])
dnl MinGW has a vswprintf with a different prototype, and
[AC_MSG_RESULT([no])]);
fi
-if test "x$ac_cv_header_fnmatch_h" = "xyes"; then
- WX_CHECK_FUNCS(fnmatch,,,[#include <fnmatch.h>])
-fi
-
if test "$wxUSE_FILE" = "yes"; then
WX_CHECK_FUNCS(fsync)
fi
+dnl at least under IRIX with mipsPro the C99 round() function is available when
+dnl building using the C compiler but not when using C++ one
+AC_LANG_PUSH(C++)
WX_CHECK_FUNCS(round,,,[#include <math.h>])
+AC_LANG_POP()
dnl the following tests are for Unix(like) systems only
if test "$TOOLKIT" != "MSW"; then
dnl check for available version of iconv()
-
-AM_ICONV
-LIBS="$LIBICONV $LIBS"
+if test "$wxUSE_LIBICONV" != "no" ; then
+ AM_ICONV
+ LIBS="$LIBICONV $LIBS"
+fi
dnl check for POSIX signals if we need them
if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes" -a "$wxUSE_UNIX" = "yes"; then
fi
fi
-if test "$wxUSE_STACKWALKER" = "yes" -a "$USE_WIN32" != "1" -a "$USE_UNIX" != "1"; then
+if test "$wxUSE_STACKWALKER" = "yes" -a "$USE_WIN32" != 1 -a "$USE_UNIX" != 1; then
AC_MSG_WARN([wxStackWalker is only available on Win32 and UNIX... disabled])
wxUSE_STACKWALKER=no
fi
fi
fi
-dnl check for timegm() used by datetime.cpp
-AC_CHECK_FUNCS(timegm)
-
dnl look for a function to modify the environment
-AC_CHECK_FUNCS(putenv setenv, break)
+AC_CHECK_FUNCS(setenv putenv, break)
+if test "$ac_cv_func_setenv" = "yes"; then
+ AC_CHECK_FUNCS(unsetenv)
+fi
HAVE_SOME_SLEEP_FUNC=0
if test "$USE_BEOS" = 1; then
dnl check for uname (POSIX) and gethostname (BSD)
WX_CHECK_FUNCS(uname,,,[#include <sys/utsname.h>])
if test "$wx_cv_func_uname" != yes; then
- WX_CHECK_FUNCS(gethostname)
+ WX_CHECK_FUNCS(gethostname)
fi
WX_CHECK_FUNCS(strtok_r, [], [], [#define _REENTRANT])
WX_CHECK_FUNCS(fdopen)
+if test "$wxUSE_TARSTREAM" = "yes"; then
+ WX_CHECK_FUNCS(sysconf)
+
+ WX_CHECK_FUNCS(getpwuid_r, [], [],
+ [
+ #define _REENTRANT
+ #include <pwd.h>
+ ],
+ [[
+ struct passwd pw, *ppw;
+ char buf[1024];
+ getpwuid_r(0, &pw, buf, sizeof(buf), &ppw)
+ ]])
+
+ WX_CHECK_FUNCS(getgrgid_r, [], [],
+ [
+ #define _REENTRANT
+ #include <grp.h>
+ ],
+ [[
+ struct group grp, *pgrp;
+ char buf[1024];
+ getgrgid_r(0, &grp, buf, sizeof(buf), &pgrp)
+ ]])
+fi
+
fi
dnl with the convention that anything starting with '-' is a cpp flag
dnl while anything else is a library (i.e. there is an implicit "-l")
THREAD_OPTS="-pthread"
+ if test "x$SUNCXX" = xyes; then
+ THREAD_OPTS="-mt lthread $THREAD_OPTS"
+ fi
+
case "${host}" in
*-*-solaris2* | *-*-sunos4* )
if test "x$GCC" = "xyes"; then
dnl Solaris/gcc combination use this one for some reason
THREAD_OPTS="-pthreads $THREAD_OPTS"
- else
- THREAD_OPTS="-mt $THREAD_OPTS"
fi
;;
*-*-freebsd*)
fi
;;
+ *-*-qnx*)
+ dnl under QNX thread functions are in libc so we don't need any
+ dnl special options to link with them
+ THREAD_OPTS=""
+ ;;
+
*-*-*UnixWare*)
dnl flying by man pages here: Caldera online docs use this
if test "x$GCC" != "xyes"; then
;;
esac
- dnl simply linking with libpthread should make the test below work but
- dnl it's far from certain that the threaded programs compiled without
- dnl any special switches actually work, so try it after all the others
- THREAD_OPTS="$THREAD_OPTS pthread none"
+ case "${host}" in
+ *-*-qnx*)
+ dnl -lpthread works, i.e. AC_TRY_LINK() would pass, but results
+ dnl in warnings and is not needed under QNX so try without it
+ dnl first
+ THREAD_OPTS="none pthread"
+ ;;
+
+ *)
+ dnl simply linking with libpthread should make the test below
+ dnl work but it's far from certain that the threaded programs
+ dnl compiled without any special switches actually work, so try
+ dnl it after all the others
+ THREAD_OPTS="$THREAD_OPTS pthread none"
+ ;;
+ esac
dnl now test for all possibilities
THREADS_OK=no
else
dnl yes, these special compiler flags should be used with the
dnl linker as well
+ dnl
+ dnl NB: add them to LDFLAGS immediately because we need them to be
+ dnl used for the subsequent tests some of which can fail without
+ dnl MT support, hence the reason for the duplication below:
+ dnl adding them just to WXCONFIG_LDFLAGS and adding the entire
+ dnl contents of the latter to LDFLAGS in the end is not enough.
LDFLAGS="$THREADS_CFLAGS $LDFLAGS"
+ WXCONFIG_LDFLAGS="$THREADS_CFLAGS $WXCONFIG_LDFLAGS"
LIBS="$THREADS_LINK $LIBS"
AC_MSG_CHECKING([if more special flags are required for pthreads])
dnl search path should include -L/usr/lib/threads at the
dnl beginning of the path.
LDFLAGS="-L/usr/lib/threads $LDFLAGS"
+ WXCONFIG_LDFLAGS="-L/usr/lib/threads $WXCONFIG_LDFLAGS"
flag="-D_THREAD_SAFE"
;;
*-freebsd*)
dnl wouldn't be found by it
AC_CACHE_CHECK([for pthread_cleanup_push/pop], wx_cv_func_pthread_cleanup,
[
+ dnl C compiler may treat pthread_cleanup_push() as an undeclared
+ dnl function and not give a warning even if it's unavailable, so use
+ dnl the C++ one for this test
+ AC_LANG_PUSH(C++)
AC_TRY_COMPILE([#include <pthread.h>
void ThreadCleanupFunc(void *p);
],
wx_cv_func_pthread_cleanup=no
]
)
+ AC_LANG_POP()
])
if test "x$wx_cv_func_pthread_cleanup" = "xyes"; then
AC_DEFINE(wxHAVE_PTHREAD_CLEANUP)
fi
- AC_CHECK_HEADER(sched.h,,, [AC_INCLUDES_DEFAULT()])
+ AC_CHECK_HEADERS(sched.h,,, [AC_INCLUDES_DEFAULT()])
if test "$ac_cv_header_sched_h" = "yes"; then
AC_CHECK_FUNC(sched_yield,
AC_DEFINE(HAVE_SCHED_YIELD),
AC_MSG_WARN([wxMutex won't be recursive on this platform])
fi
fi
+
+ if test "$wxUSE_COMPILER_TLS" = "auto"; then
+ if test "$USE_NETBSD" = 1; then
+ AC_MSG_WARN([Disabling TLS under NetBSD, please contact wx-dev if it works now])
+ wxUSE_COMPILER_TLS=no
+ else
+ wxUSE_COMPILER_TLS=yes
+ fi
+ fi
+
+ if test "$wxUSE_COMPILER_TLS" = "yes"; then
+ dnl test for compiler thread-specific variables support
+ AC_CACHE_CHECK([for __thread keyword],
+ wx_cv_cc___thread,
+ [
+ AC_TRY_COMPILE([#include <pthread.h>],
+ [
+ static __thread int n = 0;
+ static __thread int *p = 0;
+ ],
+ wx_cv_cc___thread=yes,
+ wx_cv_cc___thread=no
+ )
+ ]
+ )
+
+ if test "$wx_cv_cc___thread" = "yes"; then
+ AX_GXX_VERSION
+ if test -n "$ax_cv_gxx_version"; then
+ dnl g++ supports __thread since at least version 3.3 but its support
+ dnl seems to be broken until 4.1, see
+ dnl http://thread.gmane.org/gmane.comp.lib.wxwidgets.devel/108388
+ dnl
+ dnl NB: we still need to test __thread support with
+ dnl AC_TRY_COMPILE above even for g++ 4 as it doesn't
+ dnl support it for all architectures (e.g. it doesn't
+ dnl work under OS X)
+ AC_MSG_CHECKING([whether __thread support in g++ is usable])
+ case "$ax_cv_gxx_version" in
+ 1.* | 2.* | 3.* )
+ AC_MSG_RESULT([no, it's broken])
+ wx_cv_cc___thread=no
+ ;;
+ *)
+ AC_MSG_RESULT([yes, it works])
+ ;;
+ esac
+ fi
+ fi
+
+ if test "$wx_cv_cc___thread" = "yes"; then
+ AC_DEFINE(HAVE___THREAD_KEYWORD)
+ fi
+ fi
fi
dnl from if !MSW
else
if test "$wxUSE_THREADS" = "yes" ; then
case "${host}" in
+ x86_64-*-mingw32* )
+ ;;
*-*-mingw32* )
dnl check if the compiler accepts -mthreads
AC_CACHE_CHECK([if compiler supports -mthreads],
AC_CHECK_FUNC(localtime_r, [ AC_DEFINE(HAVE_LOCALTIME_R) ])
AC_CHECK_FUNC(gmtime_r, [ AC_DEFINE(HAVE_GMTIME_R) ])
-AC_CHECK_FUNC(readdir_r, [ AC_DEFINE(HAVE_READDIR_R) ])
dnl By preference, we probably should use getaddrinfo which avoids thread
dnl safety issues and supports IPv6, however there currently is no code
dnl for it, so testing for it is temporarily disabled and we are restricted
fi
fi
-if test "$WXGTK20" = 1 ; then
- AC_DEFINE_UNQUOTED(__WXGTK20__,$WXGTK20)
+if test "$WXGTK2" = 1 ; then
+ AC_DEFINE_UNQUOTED(__WXGTK20__,$WXGTK2)
WXGTK12=1
fi
dnl DEBUG_CFLAGS contains debugging options (supposed to be the same for C and C++
dnl compilers: we'd need a separate DEBUG_CXXFLAGS if this is ever not the case)
DEBUG_CFLAGS=
-if test "$wxUSE_DEBUG_INFO" = "yes" ; then
+if `echo $CXXFLAGS $CFLAGS | grep " -g" >/dev/null`; then
+ dnl the CXXFLAGS or the CFLAGS variable already contains the -g flag
+ dnl (e.g. it was specified by the user before running configure); since
+ dnl later they will be merged with DEBUG_CFLAGS, don't set the -g option
+ dnl in DEBUG_CFLAGS to avoid (possibly different) flag duplicates
+ AC_MSG_WARN([CXXFLAGS/CFLAGS already contains -g flag; ignoring the --enable-debug_info option])
+elif test "$wxUSE_DEBUG_INFO" = "yes" ; then
DEBUG_CFLAGS="-g"
- wxUSE_OPTIMISE=no
fi
if test "$wxUSE_DEBUG_GDB" = "yes" ; then
fi
fi
-if test "$wxUSE_DEBUG_FLAG" = "yes" ; then
- AC_DEFINE(WXDEBUG)
- WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D__WXDEBUG__"
-else
+if test "$wxUSE_DEBUG_FLAG" = "no" ; then
+ WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -DwxDEBUG_LEVEL=0"
+
if test "$wxUSE_GTK" = 1 ; then
if test "x$wxGTK_VERSION" = "x1" ; then
CPPFLAGS="-DGTK_NO_CHECK_CASTS $CPPFLAGS"
if test "$GCC" = "yes" ; then
if test "$wxUSE_NO_RTTI" = "yes" ; then
- WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -fno-rtti"
+ dnl Define wxNO_RTTI on the command line because only g++ 4.3 and later
+ dnl define __GXX_RTTI which allows us to detect the use of -fno-rtti
+ dnl switch but we need to do it manually for the older versions.
+ WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -DwxNO_RTTI -fno-rtti"
fi
if test "$wxUSE_NO_EXCEPTIONS" = "yes" ; then
WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -fno-exceptions"
dnl C/C++ compiler option for optimization (supposed to be the same for both)
OPTIMISE_CFLAGS=
-if test "$wxUSE_OPTIMISE" = "no" ; then
- if test "$GCC" = yes ; then
- dnl use -O0 because compiling with it is faster than compiling with no
- dnl optimization options at all (at least with g++ 3.2)
- OPTIMISE_CFLAGS="-O0"
- fi
+if `echo $CXXFLAGS $CFLAGS | grep " -O" >/dev/null`; then
+ dnl the CXXFLAGS or the CFLAGS variable already contains -O optimization flag
+ dnl (e.g. it was specified by the user before running configure); since
+ dnl later they will be merged with OPTIMISE_CFLAGS, don't set the -O option
+ dnl in OPTIMISE_CFLAGS to avoid (possibly different) flag duplicates
+ AC_MSG_WARN([CXXFLAGS/CFLAGS already contains -O flag; ignoring the --disable-optimise option])
else
- if test "$GCC" = yes ; then
- case "${host}" in
- *-pc-os2_emx | *-pc-os2-emx )
- dnl Not all of the supported gcc versions understand
- dnl -fstrict-aliasing and none actually needs it (yet).
- OPTIMISE_CFLAGS="-O2"
- ;;
- *)
- dnl Switch on optimisation but keep strict-aliasing off for
- dnl now (see -fstrict-aliasing in the gcc manual). When it is
- dnl switched back on consider using -Wstrict-aliasing=2.
- OPTIMISE_CFLAGS="-O2 -fno-strict-aliasing"
- ;;
- esac
+ if test "$wxUSE_OPTIMISE" = "no" ; then
+ if test "$GCC" = yes ; then
+ dnl use -O0 because compiling with it is faster than compiling with no
+ dnl optimization options at all (at least with g++ 3.2)
+ OPTIMISE_CFLAGS="-O0"
+ fi
else
- OPTIMISE_CFLAGS="-O"
+ if test "$GCC" = yes ; then
+ case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ dnl Not all of the supported gcc versions understand
+ dnl -fstrict-aliasing and none actually needs it (yet).
+ OPTIMISE_CFLAGS="-O2"
+ ;;
+ *)
+ dnl Switch on optimisation but keep strict-aliasing off for
+ dnl now (see -fstrict-aliasing in the gcc manual). When it is
+ dnl switched back on consider using -Wstrict-aliasing=2.
+ OPTIMISE_CFLAGS="-O2 -fno-strict-aliasing"
+ ;;
+ esac
+ else
+ OPTIMISE_CFLAGS="-O"
+ fi
fi
fi
HAVE_DL_FUNCS=0
HAVE_SHL_FUNCS=0
if test "$wxUSE_DYNAMIC_LOADER" = "yes" -o "$wxUSE_DYNLIB_CLASS" = "yes" ; then
- if test "$USE_DARWIN" = 1; then
- dnl dlopen/dlerror is implemented in dynlib.cpp for Darwin/Mac OS X
- HAVE_DL_FUNCS=1
- elif test "$USE_DOS" = 1; then
+ if test "$USE_DOS" = 1; then
HAVE_DL_FUNCS=0
else
dnl the test is a bit complicated because we check for dlopen() both with
])
])
- dnl check also for dlerror()
- if test "$HAVE_DL_FUNCS" = 1; then
- AC_CHECK_FUNCS(dlerror,
- AC_DEFINE(HAVE_DLERROR),
- [
- AC_CHECK_LIB(dl, dlerror, AC_DEFINE(HAVE_DLERROR))
- ]
- )
+ dnl check also for dlerror()
+ if test "$HAVE_DL_FUNCS" = 1; then
+ AC_CHECK_FUNCS(dlerror,
+ AC_DEFINE(HAVE_DLERROR),
+ [
+ AC_CHECK_LIB(dl, dlerror, AC_DEFINE(HAVE_DLERROR))
+ ]
+ )
+ fi
fi
+
+ dnl Force HAVE_DL_FUNCS on for Darwin, even if the tests failed (e.g. pre-10.3)
+ if test "$USE_DARWIN" = 1; then
+ dnl dlopen/dlerror is implemented in dynlib.cpp for Darwin/Mac OS X
+ HAVE_DL_FUNCS=1
fi
if test "$HAVE_DL_FUNCS" = 0; then
fi
fi
+dnl ---------------------------------------------------------------------------
+dnl File system watcher checks
+dnl ---------------------------------------------------------------------------
+
+if test "$wxUSE_FSWATCHER" = "yes"; then
+ dnl wxFileSystemWatcher is always available under MSW but we need either
+ dnl inotify or kqueue support in the system for it under Unix (this
+ dnl includes OS X which does have kqueue but no other platforms)
+ if test "$wxUSE_MSW" != "1"; then
+ if test "$wxUSE_UNIX" = "yes"; then
+ AC_CHECK_HEADERS(sys/inotify.h,,, [AC_INCLUDES_DEFAULT()])
+ if test "$ac_cv_header_sys_inotify_h" = "yes"; then
+ AC_DEFINE(wxHAS_INOTIFY)
+ else
+ AC_CHECK_HEADERS(sys/event.h,,, [AC_INCLUDES_DEFAULT()])
+ if test "$ac_cv_header_sys_event_h" = "yes"; then
+ AC_DEFINE(wxHAS_KQUEUE)
+ else
+ wxUSE_FSWATCHER=no
+ fi
+ fi
+ else
+ wxUSE_FSWATCHER=no
+ fi
+ fi
+
+ if test "$wxUSE_FSWATCHER" = "yes"; then
+ AC_DEFINE(wxUSE_FSWATCHER)
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS fswatcher"
+ else
+ AC_MSG_WARN([wxFileSystemWatcher won't be available on this platform])
+ fi
+fi
+
dnl ---------------------------------------------------------------------------
dnl Register non-GUI class options for makefiles and setup.h
dnl ---------------------------------------------------------------------------
AC_DEFINE(wxUSE_STL)
fi
+if test "$wxUSE_EXTENDED_RTTI" = "yes"; then
+ AC_DEFINE(wxUSE_EXTENDED_RTTI)
+fi
+
+if test "$wxUSE_ANY" = "yes"; then
+ AC_DEFINE(wxUSE_ANY)
+fi
+
if test "$wxUSE_APPLE_IEEE" = "yes"; then
AC_DEFINE(wxUSE_APPLE_IEEE)
fi
dnl Unix implementation needs additional checks because audio support
dnl comes in many favours:
-if test "$USE_UNIX" = "1" ; then
+if test "$USE_UNIX" = 1 ; then
dnl mmedia doesn't compile with wxMGL, remove this if this is ever fixed
if test "$wxUSE_MGL" != 1; then
dnl it's not enough to check for just the header because OSS under NetBSD
WITH_PLUGIN_SDL=0
if test "$wxUSE_SOUND" = "yes"; then
- if test "$USE_UNIX" = "1" ; then
+ if test "$USE_UNIX" = 1 ; then
if test "$wxUSE_LIBSDL" != "no"; then
AM_PATH_SDL([1.2.0],
[
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sound"
fi
-if test "$WXGTK20" = 1; then
+if test "$WXGTK2" = 1; then
PKG_PROG_PKG_CONFIG()
if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes" ; then
+
+ if test "$wxUSE_GTKPRINT" = "yes" ; then
+
+ PKG_CHECK_MODULES(GTKPRINT,
+ [gtk+-unix-print-2.0 >= 2.10],
+ [
+ CFLAGS="$GTKPRINT_CFLAGS $CFLAGS"
+ CXXFLAGS="$GTKPRINT_CFLAGS $CXXFLAGS"
+ AC_DEFINE(wxUSE_GTKPRINT)
+ ],
+ [
+ AC_MSG_WARN([GTK printing support not found (GTK+ >= 2.10), library will use GNOME printing support or standard PostScript printing])
+ wxUSE_GTKPRINT="no"
+ ]
+ )
+ fi
+
if test "$wxUSE_LIBGNOMEPRINT" = "yes" ; then
PKG_CHECK_MODULES(LIBGNOMEPRINTUI,
CFLAGS="$CFLAGS $HILDON_CFLAGS"
CXXFLAGS="$CXXFLAGS $HILDON_CFLAGS"
AC_DEFINE(wxUSE_LIBHILDON)
+ ac_hildon_lgpl=1
],
[
AC_MSG_WARN([libhildon_lgpl not found])
wxUSE_LIBHILDON="no"
+ ac_hildon_lgpl=0
]
)
+
+ if test "$ac_hildon_lgpl" = 0 ; then
+ PKG_CHECK_MODULES(HILDON2,
+ [hildon-1 >= 1.99],
+ [
+ EXTRALIBS_HILDON="$HILDON2_LIBS"
+ CFLAGS="$CFLAGS $HILDON2_CFLAGS"
+ CXXFLAGS="$CXXFLAGS $HILDON2_CFLAGS"
+ AC_DEFINE(wxUSE_LIBHILDON2)
+ ],
+ [
+ AC_MSG_WARN([libhildon_1 not found])
+ wxUSE_LIBHILDON2="no"
+ ]
+ )
+ fi
fi
fi
fi
fi
+if test "$wxUSE_FILE_HISTORY" = "yes"; then
+ AC_DEFINE(wxUSE_FILE_HISTORY)
+fi
+
if test "$wxUSE_FILESYSTEM" = "yes"; then
if test "$wxUSE_STREAMS" != yes -o \( "$wxUSE_FILE" != yes -a "$wxUSE_FFILE" != yes \); then
AC_MSG_WARN(wxFileSystem requires wxStreams and wxFile or wxFFile... disabled)
fi
if test "$wxUSE_DEBUGREPORT" = "yes"; then
- if test "$USE_UNIX" != "1" -a "$USE_WIN32" != "1"; then
+ if test "$USE_UNIX" != 1 -a "$USE_WIN32" != 1; then
AC_MSG_WARN([Creating debug reports not currently supported on this system, disabled])
wxUSE_DEBUGREPORT=no
else
fi
fi
+if test "$wxUSE_XLOCALE" = "yes" ; then
+ AC_DEFINE(wxUSE_XLOCALE)
+ AC_CHECK_TYPES(locale_t,,,
+ [#include <xlocale.h>
+ #include <locale.h>])
+fi
+
if test "$wxUSE_LOG" = "yes"; then
AC_DEFINE(wxUSE_LOG)
AC_DEFINE(wxUSE_GEOMETRY)
fi
+if test "$wxUSE_BASE64" = "yes"; then
+ AC_DEFINE(wxUSE_BASE64)
+fi
+
if test "$wxUSE_STREAMS" = "yes" ; then
AC_DEFINE(wxUSE_STREAMS)
fi
AC_DEFINE(wxUSE_PRINTF_POS_PARAMS)
fi
+if test "$wxUSE_OBJC_UNIQUIFYING" = "yes"; then
+ AC_DEFINE(wxUSE_OBJC_UNIQUIFYING)
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl console event loop stuff
+dnl ---------------------------------------------------------------------------
+
+if test "$wxUSE_CONSOLE_EVENTLOOP" = "yes"; then
+ AC_DEFINE(wxUSE_CONSOLE_EVENTLOOP)
+
+ if test "$wxUSE_UNIX" = "yes"; then
+ if test "$wxUSE_SELECT_DISPATCHER" = "yes"; then
+ AC_DEFINE(wxUSE_SELECT_DISPATCHER)
+ fi
+
+ if test "$wxUSE_EPOLL_DISPATCHER" = "yes"; then
+ AC_CHECK_HEADERS(sys/epoll.h,,, [AC_INCLUDES_DEFAULT()])
+ if test "$ac_cv_header_sys_epoll_h" = "yes"; then
+ AC_DEFINE(wxUSE_EPOLL_DISPATCHER)
+ else
+ AC_MSG_WARN([sys/epoll.h not available, wxEpollDispatcher disabled])
+ fi
+ fi
+ fi
+fi
dnl ---------------------------------------------------------------------------
dnl time/date functions
dnl ---------------------------------------------------------------------------
-if test "$wxUSE_DATETIME" = "yes"; then
- dnl check for strptime and for its declaration as some systems lack it
- dnl FIXME: use WX_CHECK_FUNCS instead
- AC_CHECK_FUNCS(strptime)
- if test "$ac_cv_func_strptime" = "yes"; then
- AC_CACHE_CHECK([for strptime declaration], wx_cv_func_strptime_decl,
+dnl check for gettimeofday (SVr4, BSD 4.3) and ftime (V7, BSD 4.3) for the
+dnl function to be used for high resolution timers
+AC_CHECK_FUNCS(gettimeofday ftime, break)
+
+if test "$ac_cv_func_gettimeofday" = "yes"; then
+ AC_CACHE_CHECK([whether gettimeofday takes two arguments],
+ wx_cv_func_gettimeofday_has_2_args,
+ [
+ dnl on some _really_ old systems it takes only 1 argument
+ AC_TRY_COMPILE(
[
- AC_LANG_PUSH(C++)
- AC_TRY_COMPILE(
- [
- #include <time.h>
- ],
- [
- struct tm t;
- strptime("foo", "bar", &t);
- ],
- wx_cv_func_strptime_decl=yes,
- wx_cv_func_strptime_decl=no
- )
- AC_LANG_POP()
- ]
+ #include <sys/time.h>
+ #include <unistd.h>
+ ],
+ [
+ struct timeval tv;
+ gettimeofday(&tv, NULL);
+ ],
+ wx_cv_func_gettimeofday_has_2_args=yes,
+ AC_TRY_COMPILE(
+ [
+ #include <sys/time.h>
+ #include <unistd.h>
+ ],
+ [
+ struct timeval tv;
+ gettimeofday(&tv);
+ ],
+ wx_cv_func_gettimeofday_has_2_args=no,
+ [
+ AC_MSG_WARN([failed to determine number of gettimeofday() arguments])
+ wx_cv_func_gettimeofday_has_2_args=unknown
+ ]
+ )
)
+ ])
+
+ if test "$wx_cv_func_gettimeofday_has_2_args" != "yes"; then
+ AC_DEFINE(WX_GETTIMEOFDAY_NO_TZ)
fi
- if test "$wx_cv_func_strptime_decl" = "yes"; then
- AC_DEFINE(HAVE_STRPTIME_DECL)
- fi
+fi
+if test "$wxUSE_DATETIME" = "yes"; then
dnl check for timezone variable
dnl doesn't exist under Darwin / Mac OS X which uses tm_gmtoff instead
AC_CACHE_CHECK(for timezone variable in <time.h>,
AC_DEFINE(WX_GMTOFF_IN_TM)
fi
- dnl check for gettimeofday (SVr4, BSD 4.3) and ftime (V7, BSD 4.3) for the
- dnl function to be used for high resolution timers
- AC_CHECK_FUNCS(gettimeofday ftime, break)
-
- if test "$ac_cv_func_gettimeofday" = "yes"; then
- AC_CACHE_CHECK([whether gettimeofday takes two arguments],
- wx_cv_func_gettimeofday_has_2_args,
- [
- dnl on some _really_ old systems it takes only 1 argument
- AC_TRY_COMPILE(
- [
- #include <sys/time.h>
- #include <unistd.h>
- ],
- [
- struct timeval tv;
- gettimeofday(&tv, NULL);
- ],
- wx_cv_func_gettimeofday_has_2_args=yes,
- AC_TRY_COMPILE(
- [
- #include <sys/time.h>
- #include <unistd.h>
- ],
- [
- struct timeval tv;
- gettimeofday(&tv);
- ],
- wx_cv_func_gettimeofday_has_2_args=no,
- [
- AC_MSG_WARN([failed to determine number of gettimeofday() arguments])
- wx_cv_func_gettimeofday_has_2_args=unknown
- ]
- )
- )
- ])
-
- if test "$wx_cv_func_gettimeofday_has_2_args" != "yes"; then
- AC_DEFINE(WX_GETTIMEOFDAY_NO_TZ)
- fi
- fi
-
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS typetest"
fi
dnl VZ: the GUI hooks wxSocket needs are not implemented yet in some toolkits
if test "$wxUSE_SOCKETS" = "yes"; then
- if test "$wxUSE_MGL" = "1"; then
+ if test "$wxUSE_MGL" = 1; then
AC_MSG_WARN([wxSocket not yet supported under MGL... disabled])
wxUSE_SOCKETS="no"
fi
AC_CACHE_CHECK([what is the type of the fifth argument of getsockopt],
wx_cv_type_getsockopt5,
[
+ dnl Note that the rules for compatibility of pointers
+ dnl are somewhat different between C and C++, so code
+ dnl that fails in C++ may not even give a warning about
+ dnl converting between incompatible pointer types in C.
+ dnl So this test needs to be done in C++ mode.
+ AC_LANG_PUSH(C++)
AC_TRY_COMPILE(
[
#include <sys/types.h>
],
wx_cv_type_getsockopt5=socklen_t,
[
- dnl Note that the rules for compatibility of pointers
- dnl are somewhat different between C and C++, so code
- dnl that fails in C++ may not even give a warning about
- dnl converting between incompatible pointer types in C.
- dnl So this test needs to be done in C++ mode.
- AC_LANG_PUSH(C++)
AC_TRY_COMPILE(
[
#include <sys/types.h>
wx_cv_type_getsockopt5=unknown
)
)
- AC_LANG_POP()
]
)
+ AC_LANG_POP()
])
if test "$wx_cv_type_getsockopt5" = "unknown"; then
fi
if test "$wxUSE_SOCKETS" = "yes" ; then
+ if test "$wxUSE_IPV6" = "yes"; then
+ AC_CACHE_CHECK(
+ [whether we have sockaddr_in6],
+ [wx_cv_type_sockaddr_in6],
+ [
+ AC_TRY_COMPILE(
+ [
+ #include <sys/types.h>
+ #include <sys/socket.h>
+ #include <netinet/in.h>
+ ],
+ [
+ struct sockaddr_in6 sa6;
+ ],
+ wx_cv_type_sockaddr_in6=yes,
+ wx_cv_type_sockaddr_in6=no
+ )
+ ]
+ )
+
+ if test "$wx_cv_type_sockaddr_in6"="yes"; then
+ AC_DEFINE(wxUSE_IPV6)
+ else
+ AC_MSG_WARN([IPv6 support not available... disabled])
+ fi
+ fi
+
AC_DEFINE(wxUSE_SOCKETS)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sockets"
fi
wxUSE_JOYSTICK=yes
dnl mac only available on darwin
- elif test "$TOOLKIT" = "MAC" -o "$TOOLKIT" = "COCOA"; then
+ elif test "$TOOLKIT" = "OSX" -o "$TOOLKIT" = "COCOA"; then
if test "$USE_DARWIN" = 1; then
dnl check for a bug in the headers, some have bad setEventCallout
AC_MSG_CHECKING([headers have declarations needed for joystick support])
dnl joystick support is only for Linux 2.1.x or greater
else
dnl wxJoystick not supported by wxMGL at all
- if test "$wxUSE_MGL" != "1"; then
+ if test "$wxUSE_MGL" != 1; then
dnl notice the dummy includes argument: without it, AC_CHECK_HEADER
dnl checks only whether the header can be preprocessed, not that it
dnl can be compiled and in Linux 2.6.16 joystick.h is present but
dnl can't be compiled because of an error and with the default
dnl AC_CHECK_HEADER semantics we'd still detect it in this case and
dnl build would fail later
- AC_CHECK_HEADER(linux/joystick.h, [wxUSE_JOYSTICK=yes],, [AC_INCLUDES_DEFAULT()])
+ AC_CHECK_HEADERS([linux/joystick.h], [wxUSE_JOYSTICK=yes],, [AC_INCLUDES_DEFAULT()])
fi
fi
dnl String stuff
dnl ---------------------------------------------------------------------------
+if test "$wxUSE_FONTENUM" = "yes" ; then
+ AC_DEFINE(wxUSE_FONTENUM)
+fi
+
if test "$wxUSE_FONTMAP" = "yes" ; then
AC_DEFINE(wxUSE_FONTMAP)
fi
fi
fi
-if test "$wxUSE_wxUSE_EXPERIMENTAL_PRINTF" = "yes"; then
- AC_DEFINE(wxUSE_EXPERIMENTAL_PRINTF)
-fi
-
-dnl ----------------------------------------------------------------
-dnl Register PostScript options for makefiles and setup.h
-dnl ----------------------------------------------------------------
+if test "$wxUSE_UNICODE" = "yes" -a "$wxUSE_UNICODE_UTF8" = "yes"; then
+ AC_DEFINE(wxUSE_UNICODE_UTF8)
-if test "$wxUSE_POSTSCRIPT" = "yes" ; then
- AC_DEFINE(wxUSE_POSTSCRIPT)
+ if test "$wxUSE_UNICODE_UTF8_LOCALE" = "yes"; then
+ AC_DEFINE(wxUSE_UTF8_LOCALE_ONLY)
+ fi
fi
-AC_DEFINE(wxUSE_AFM_FOR_POSTSCRIPT)
-
-AC_DEFINE(wxUSE_NORMALIZED_PS_FONTS)
-
dnl ---------------------------------------------------------------------------
dnl big GUI components: MDI, doc/view, printing, help, ...
dnl ---------------------------------------------------------------------------
if test "$wxUSE_DOC_VIEW_ARCHITECTURE" = "yes" ; then
AC_DEFINE(wxUSE_DOC_VIEW_ARCHITECTURE)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS docview"
- if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS docvwmdi"
- fi
fi
if test "$wxUSE_HELP" = "yes"; then
fi
if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes" ; then
- if test "$wxUSE_CONSTRAINTS" != "yes"; then
- AC_MSG_WARN(Printing support cannot be used without constraints so it won't be compiled without it)
- else
- AC_DEFINE(wxUSE_PRINTING_ARCHITECTURE)
- fi
+ AC_DEFINE(wxUSE_PRINTING_ARCHITECTURE)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS printing"
fi
+if test "$wxUSE_POSTSCRIPT" = "yes" ; then
+ AC_DEFINE(wxUSE_POSTSCRIPT)
+fi
+
+AC_DEFINE(wxUSE_AFM_FOR_POSTSCRIPT)
+
+if test "$wxUSE_SVG" = "yes"; then
+ AC_DEFINE(wxUSE_SVG)
+fi
dnl ---------------------------------------------------------------------------
dnl wxMetafile availability
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS dnd"
fi
+if test "$wxUSE_CLIPBOARD" = "yes"; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS clipboard"
+fi
+
if test "$wxUSE_SPLINES" = "yes" ; then
AC_DEFINE(wxUSE_SPLINES)
fi
AC_DEFINE(wxUSE_MOUSEWHEEL)
fi
+if test "$wxUSE_UIACTIONSIMULATOR" = "yes" ; then
+ AC_DEFINE(wxUSE_UIACTIONSIMULATOR)
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS uiaction"
+fi
+
dnl ---------------------------------------------------------------------------
dnl GUI controls
dnl ---------------------------------------------------------------------------
USES_CONTROLS=1
fi
+if test "$wxUSE_COMMANDLINKBUTTON" = "yes"; then
+ AC_DEFINE(wxUSE_COMMANDLINKBUTTON)
+ USES_CONTROLS=1
+fi
+
if test "$wxUSE_CHOICE" = "yes"; then
AC_DEFINE(wxUSE_CHOICE)
USES_CONTROLS=1
if test "$wxUSE_CHECKLST" = "yes"; then
AC_DEFINE(wxUSE_CHECKLISTBOX)
USES_CONTROLS=1
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS checklst"
fi
if test "$wxUSE_COLOURPICKERCTRL" = "yes"; then
USES_CONTROLS=1
fi
+if test "$wxUSE_FILECTRL" = "yes"; then
+ AC_DEFINE(wxUSE_FILECTRL)
+ USES_CONTROLS=1
+fi
+
if test "$wxUSE_FILEPICKERCTRL" = "yes"; then
AC_DEFINE(wxUSE_FILEPICKERCTRL)
USES_CONTROLS=1
wxUSE_DISPLAY=no
else
AC_DEFINE(wxUSE_DISPLAY)
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS display multimon"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS display"
fi
fi
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS grid"
fi
+if test "$wxUSE_HEADERCTRL" = "yes"; then
+ AC_DEFINE(wxUSE_HEADERCTRL)
+ USES_CONTROLS=1
+fi
+
if test "$wxUSE_HYPERLINKCTRL" = "yes"; then
AC_DEFINE(wxUSE_HYPERLINKCTRL)
USES_CONTROLS=1
AC_DEFINE(wxUSE_IMAGLIST)
fi
+if test "$wxUSE_INFOBAR" = "yes"; then
+ AC_DEFINE(wxUSE_INFOBAR)
+fi
+
if test "$wxUSE_LISTBOOK" = "yes"; then
AC_DEFINE(wxUSE_LISTBOOK)
USES_CONTROLS=1
if test "$wxUSE_LISTBOX" = "yes"; then
AC_DEFINE(wxUSE_LISTBOX)
USES_CONTROLS=1
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS listbox"
fi
if test "$wxUSE_LISTCTRL" = "yes"; then
fi
fi
+if test "$wxUSE_EDITABLELISTBOX" = "yes"; then
+ AC_DEFINE(wxUSE_EDITABLELISTBOX)
+ USES_CONTROLS=1
+fi
+
if test "$wxUSE_NOTEBOOK" = "yes"; then
AC_DEFINE(wxUSE_NOTEBOOK)
USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS notebook"
fi
+if test "$wxUSE_NOTIFICATION_MESSAGE" = "yes"; then
+ AC_DEFINE(wxUSE_NOTIFICATION_MESSAGE)
+fi
+
if test "$wxUSE_ODCOMBOBOX" = "yes"; then
AC_DEFINE(wxUSE_ODCOMBOBOX)
USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS combo"
fi
-dnl if test "$wxUSE_PROPSHEET" = "yes"; then
-dnl AC_DEFINE(wxUSE_PROPSHEET)
-dnl USES_CONTROLS=1
-dnl SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS proplist"
-dnl fi
-
if test "$wxUSE_RADIOBOX" = "yes"; then
AC_DEFINE(wxUSE_RADIOBOX)
USES_CONTROLS=1
USES_CONTROLS=1
fi
+if test "$wxUSE_REARRANGECTRL" = "yes"; then
+ AC_DEFINE(wxUSE_REARRANGECTRL)
+fi
+
+if test "$wxUSE_RICHMSGDLG" = "yes"; then
+ AC_DEFINE(wxUSE_RICHMSGDLG)
+fi
+
if test "$wxUSE_SASH" = "yes"; then
AC_DEFINE(wxUSE_SASH)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sashtest"
if test "$wxUSE_SCROLLBAR" = "yes"; then
AC_DEFINE(wxUSE_SCROLLBAR)
USES_CONTROLS=1
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS scroll scrollsub"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS scroll"
fi
if test "$wxUSE_SEARCHCTRL" = "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS statbar"
fi
-if test "$wxUSE_TAB_DIALOG" = "yes"; then
- AC_DEFINE(wxUSE_TAB_DIALOG)
-fi
-
if test "$wxUSE_TEXTCTRL" = "yes"; then
AC_DEFINE(wxUSE_TEXTCTRL)
USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS text"
+
+ dnl we don't have special switches to disable wxUSE_RICHEDIT[2], it doesn't
+ dnl seem useful to allow disabling them
+ AC_DEFINE(wxUSE_RICHEDIT)
+ AC_DEFINE(wxUSE_RICHEDIT2)
fi
if test "$wxUSE_TOGGLEBTN" = "yes"; then
- if test "$wxUSE_COCOA" = 1 ; then
+ if test "$wxUSE_OLD_COCOA" = 1 ; then
AC_MSG_WARN([Toggle button not yet supported under Mac OS X... disabled])
wxUSE_TOGGLEBTN=no
fi
fi
if test "$wxUSE_POPUPWIN" = "yes"; then
- if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1 ; then
+ if test "$wxUSE_OLD_COCOA" = 1 ; then
AC_MSG_WARN([Popup window not yet supported under Mac OS X... disabled])
else
if test "$wxUSE_PM" = 1; then
fi
if test "$wxUSE_DIALUP_MANAGER" = "yes"; then
- if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1 -o "$wxUSE_MGL" = 1; then
+ if test "$wxUSE_MAC" = 1 -o "$wxUSE_OLD_COCOA" = 1 -o "$wxUSE_MGL" = 1; then
AC_MSG_WARN([Dialup manager not supported on this platform... disabled])
else
AC_DEFINE(wxUSE_DIALUP_MANAGER)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS access"
fi
-if test "$wxUSE_DC_CACHEING" = "yes"; then
- AC_DEFINE(wxUSE_DC_CACHEING)
+if test "$wxUSE_ARTPROVIDER_STD" = "yes"; then
+ AC_DEFINE(wxUSE_ARTPROVIDER_STD)
+fi
+
+if test "$wxUSE_ARTPROVIDER_TANGO" = "auto"; then
+ dnl Tango-based art provider is not needed in GTK-based ports as the
+ dnl native art provider completely replaces it.
+ if test "$wxUSE_GTK" != 1; then
+ dnl It also requires support for memory-mapped PNG images.
+ if test "$wxUSE_LIBPNG" != no -a \
+ "$wxUSE_IMAGE" = yes -a \
+ "$wxUSE_STREAMS" = yes; then
+ wxUSE_ARTPROVIDER_TANGO="yes"
+ fi
+ fi
+fi
+
+if test "$wxUSE_ARTPROVIDER_TANGO" = "yes"; then
+ AC_DEFINE(wxUSE_ARTPROVIDER_TANGO)
fi
if test "$wxUSE_DRAGIMAGE" = "yes"; then
AC_DEFINE(wxUSE_HTML)
USE_HTML=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS html html/about html/help html/helpview html/printing html/test html/virtual html/widget html/zip htlbox"
- if test "$wxUSE_MAC" = 1; then
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS html/htmlctrl"
- fi
fi
if test "$wxUSE_WEBKIT" = "yes"; then
if test "$wxUSE_MAC" = 1 -a "$USE_DARWIN" = 1; then
#include <WebKit/WebKit.h>
])
CPPFLAGS="$old_CPPFLAGS"
- elif test "$wxUSE_COCOA" = 1; then
+ elif test "$wxUSE_OLD_COCOA" = 1; then
AC_DEFINE(wxUSE_WEBKIT)
else
wxUSE_WEBKIT=no
fi
+ if test "$wxUSE_WEBKIT" = "yes"; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS html/htmlctrl"
+ fi
fi
USE_XRC=0
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS aui"
fi
+USE_PROPGRID=0
+if test "$wxUSE_PROPGRID" = "yes"; then
+ AC_DEFINE(wxUSE_PROPGRID)
+ USE_PROPGRID=1
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS propgrid"
+fi
+
+USE_RIBBON=0
+if test "$wxUSE_RIBBON" = "yes"; then
+ AC_DEFINE(wxUSE_RIBBON)
+ USE_RIBBON=1
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ribbon"
+fi
+
USE_STC=0
if test "$wxUSE_STC" = "yes"; then
AC_DEFINE(wxUSE_STC)
USE_STC=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS stc"
+
+ dnl python is used to update src/stc.h (see build/bakefiles/scintilla.bkl)
+ AC_PATH_PROG(PYTHON, python)
+ if test "x$PYTHON" = "x"; then
+ COND_PYTHON="#"
+ fi
+ AC_SUBST(COND_PYTHON)
fi
if test "$wxUSE_MENUS" = "yes"; then
if test "$wxUSE_MINIFRAME" = "yes"; then
AC_DEFINE(wxUSE_MINIFRAME)
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS minifram"
fi
if test "$wxUSE_SYSTEM_OPTIONS" = "yes"; then
AC_DEFINE(wxUSE_SYSTEM_OPTIONS)
- if test "$TOOLKIT" = "MSW" -o "$TOOLKIT" = "GTK" -o "$TOOLKIT" = "X11" -o \
- "$TOOLKIT" = "MOTIF" -o "$TOOLKIT" = "COCOA"; then
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS taskbar"
- fi
+fi
+
+if test "$wxUSE_TASKBARICON" = "yes"; then
+ AC_DEFINE(wxUSE_TASKBARICON)
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS taskbar"
fi
fi
if test "$wxUSE_PROGRESSDLG" = "yes"; then
- if test "$wxUSE_CONSTRAINTS" != "yes"; then
- AC_MSG_WARN(wxProgressDialog requires constraints so it won't be compiled without them)
- else
- AC_DEFINE(wxUSE_PROGRESSDLG)
- fi
+ AC_DEFINE(wxUSE_PROGRESSDLG)
fi
if test "$wxUSE_SPLASH" = "yes"; then
fi
if test "$wxUSE_STARTUP_TIPS" = "yes"; then
- if test "$wxUSE_CONSTRAINTS" != "yes"; then
- AC_MSG_WARN(Startup tips requires constraints and won't be compiled without them)
- else
- AC_DEFINE(wxUSE_STARTUP_TIPS)
- fi
+ AC_DEFINE(wxUSE_STARTUP_TIPS)
fi
if test "$wxUSE_TEXTDLG" = "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS wizard"
fi
+dnl ---------------------------------------------------------------------------
+dnl options used under wxMSW and wxPM
+dnl ---------------------------------------------------------------------------
+
+if test "$wxUSE_MSW" = 1 -o "$wxUSE_PM" = 1; then
+ if test "$wxUSE_OWNER_DRAWN" = "yes"; then
+ AC_DEFINE(wxUSE_OWNER_DRAWN)
+ fi
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl wxMSW-only options
+dnl ---------------------------------------------------------------------------
+
+if test "$wxUSE_MSW" = 1 ; then
+
+ if test "$wxUSE_DC_CACHEING" = "yes"; then
+ AC_DEFINE(wxUSE_DC_CACHEING)
+ fi
+
+ if test "$wxUSE_DIB" = "yes"; then
+ AC_DEFINE(wxUSE_WXDIB)
+ fi
+
+ if test "$wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW" = "yes"; then
+ AC_DEFINE(wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW)
+ fi
+
+ if test "$wxUSE_UXTHEME" = "yes"; then
+ AC_DEFINE(wxUSE_UXTHEME)
+ fi
+
+fi
+dnl wxUSE_MSW = 1
+
+dnl not quite MSW-only although mostly useful to disable this under MSW
+if test "$wxUSE_AUTOID_MANAGEMENT" = "yes"; then
+ AC_DEFINE(wxUSE_AUTOID_MANAGEMENT)
+fi
+
+if test "$USE_WIN32" = 1 ; then
+ if test "$wxUSE_INICONF" = "yes"; then
+ AC_DEFINE(wxUSE_INICONF)
+ fi
+
+ if test "$wxUSE_REGKEY" = "yes"; then
+ AC_DEFINE(wxUSE_REGKEY)
+ fi
+fi
+dnl USE_WIN32 = 1
+
dnl ---------------------------------------------------------------------------
dnl wxGraphicsContext
dnl ---------------------------------------------------------------------------
+dnl Under Mac we don't even provide --enable-graphics_ctx switch as we always
+dnl need it -- but because we don't have the option, wxUSE_GRAPHICS_CONTEXT is
+dnl not defined automatically and we need to do it ourselves
+if test "$wxUSE_MAC" = 1; then
+ wxUSE_GRAPHICS_CONTEXT="yes"
+fi
+
if test "$wxUSE_GRAPHICS_CONTEXT" = "yes"; then
- if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = "1"; then
- AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)
- elif test "$wxUSE_GTK" != 1; then
- dnl for other builds we'll just wing it for now...
- AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)
- else
- dnl ...but let's check for cairo availability for wxGTK builds
- PKG_CHECK_MODULES(CAIRO, cairo,
- [AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)],
- [AC_MSG_WARN([Cairo library not found, unable to set wxUSE_GRAPHICS_CONTEXT])]
- )
- fi
+ wx_has_graphics=0
+ if test "$wxUSE_MSW" = 1; then
+ AC_CACHE_CHECK([if GDI+ is available], wx_cv_lib_gdiplus,
+ [
+ dnl we need just the header, not the library, as we load the
+ dnl GDI+ DLL dynamically anyhow during run-time
+ AC_LANG_PUSH(C++)
+ AC_TRY_COMPILE(
+ [#include <windows.h>
+ #include <gdiplus.h>],
+ [
+ using namespace Gdiplus;
+ ],
+ wx_cv_lib_gdiplus=yes,
+ wx_cv_lib_gdiplus=no
+ )
+ AC_LANG_POP()
+ ]
+ )
+ if test "$wx_cv_lib_gdiplus" = "yes"; then
+ wx_has_graphics=1
+ fi
+ elif test "$wxUSE_GTK" = 1 -o "$wxUSE_X11" = 1; then
+ PKG_CHECK_MODULES(CAIRO, cairo,
+ [wx_has_graphics=1],
+ [AC_MSG_WARN([Cairo library not found])]
+ )
+ if test "$wx_has_graphics" = 1; then
+ AC_DEFINE(wxUSE_CAIRO)
+
+ dnl We don't need to do this for wxGTK as we already get Cairo
+ dnl flags as part of GTK+ ones.
+ if test "$wxUSE_GTK" != 1; then
+ CPPFLAGS="$CAIRO_CFLAGS $CPPFLAGS"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $CAIRO_LIBS"
+ fi
+ fi
+ else
+ dnl assume it's ok, add more checks here if needed
+ wx_has_graphics=1
+ fi
+
+ if test "$wx_has_graphics" = 1; then
+ AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)
+ else
+ AC_MSG_WARN([wxGraphicsContext won't be available])
+ fi
fi
dnl ---------------------------------------------------------------------------
USE_MEDIA=0
-if test "$wxUSE_MEDIACTRL" = "yes"; then
+if test "$wxUSE_MEDIACTRL" = "yes" -o "$wxUSE_MEDIACTRL" = "auto"; then
USE_MEDIA=1
dnl -----------------------------------------------------------------------
if test "$wxUSE_GSTREAMER" = "yes"; then
- dnl system gstreamer package is compiled with Sun CC and outputs
- dnl CC-specific "-mt" in its flags, remove it for gcc compilation
- case "${host}" in
- *-*-solaris2* )
- if "$GCC" = yes; then
- GST_CFLAGS=`echo $GST_CFLAGS | sed 's/-mt//'`
- GST_LIBS=`echo $GST_LIBS | sed 's/-mt//'`
- fi
- esac
-
CPPFLAGS="$GST_CFLAGS $CPPFLAGS"
- LIBS="$GST_LIBS $LIBS"
+ EXTRALIBS_MEDIA="$GST_LIBS"
AC_DEFINE(wxUSE_GSTREAMER)
else
if test $USE_MEDIA = 1; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS mediaplayer"
AC_DEFINE(wxUSE_MEDIACTRL)
+ else
+ if test "$wxUSE_MEDIACTRL" = "yes"; then
+ AC_MSG_ERROR([GStreamer not available])
+ else
+ dnl was set to 'auto'
+ AC_MSG_WARN([GStreamer not available... disabling wxMediaCtrl])
+ fi
fi
fi
dnl get the string with OS info - used by wxGetOsDescription() on MacOS X
dnl ---------------------------------------------------------------------------
-if test "$cross_compiling" = "yes"; then
+if test "$cross_compiling" != "no"; then
dnl Use best guess from host as we can't use uname when cross compiling
OSINFO="\"$host\""
else
dnl define variables with all built libraries for wx-config
dnl ---------------------------------------------------------------------------
-CORE_BASE_LIBS="net base"
-CORE_GUI_LIBS="adv core"
+STD_BASE_LIBS="base"
+STD_GUI_LIBS=""
+BUILT_WX_LIBS="base"
+ALL_WX_LIBS="xrc stc gl media qa html adv core xml net base"
-if test "$wxUSE_XML" = "yes" ; then
- CORE_BASE_LIBS="xml $CORE_BASE_LIBS"
-fi
-if test "$wxUSE_ODBC" != "no" ; then
- CORE_BASE_LIBS="odbc $CORE_BASE_LIBS"
- CORE_GUI_LIBS="dbgrid $CORE_GUI_LIBS"
-fi
-if test "$wxUSE_HTML" = "yes" ; then
- CORE_GUI_LIBS="html $CORE_GUI_LIBS"
-fi
-if test "$wxUSE_DEBUGREPORT" = "yes" ; then
- CORE_GUI_LIBS="qa $CORE_GUI_LIBS"
-fi
-if test "$wxUSE_XRC" = "yes" ; then
- CORE_GUI_LIBS="xrc $CORE_GUI_LIBS"
-fi
-if test "$wxUSE_AUI" = "yes" ; then
- CORE_GUI_LIBS="aui $CORE_GUI_LIBS"
+if test "$wxUSE_SOCKETS" = "yes" ; then
+ STD_BASE_LIBS="net $STD_BASE_LIBS"
+ BUILT_WX_LIBS="net $BUILT_WX_LIBS"
fi
-if test "$wxUSE_STC" = "yes" ; then
- CORE_GUI_LIBS="stc $CORE_GUI_LIBS"
+if test "$wxUSE_XML" = "yes" ; then
+ STD_BASE_LIBS="xml $STD_BASE_LIBS"
+ BUILT_WX_LIBS="xml $BUILT_WX_LIBS"
fi
-if test "$wxUSE_GUI" != "yes"; then
- CORE_GUI_LIBS=""
+if test "$wxUSE_GUI" = "yes"; then
+ STD_GUI_LIBS="adv core"
+ BUILT_WX_LIBS="$STD_GUI_LIBS $BUILT_WX_LIBS"
+
+ if test "$wxUSE_DEBUGREPORT" = "yes" ; then
+ STD_GUI_LIBS="qa $STD_GUI_LIBS"
+ BUILT_WX_LIBS="qa $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_HTML" = "yes" ; then
+ STD_GUI_LIBS="html $STD_GUI_LIBS"
+ BUILT_WX_LIBS="html $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_MEDIACTRL" = "yes" ; then
+ BUILT_WX_LIBS="media $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_OPENGL" = "yes" ; then
+ BUILT_WX_LIBS="gl $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_AUI" = "yes" ; then
+ BUILT_WX_LIBS="aui $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_PROPGRID" = "yes" ; then
+ BUILT_WX_LIBS="propgrid $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_RIBBON" = "yes" ; then
+ BUILT_WX_LIBS="ribbon $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_RICHTEXT" = "yes" ; then
+ BUILT_WX_LIBS="richtext $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_STC" = "yes" ; then
+ BUILT_WX_LIBS="stc $BUILT_WX_LIBS"
+ fi
+ if test "$wxUSE_XRC" = "yes" ; then
+ STD_GUI_LIBS="xrc $STD_GUI_LIBS"
+ BUILT_WX_LIBS="xrc $BUILT_WX_LIBS"
+ fi
fi
-AC_SUBST(CORE_BASE_LIBS)
-AC_SUBST(CORE_GUI_LIBS)
+AC_SUBST(ALL_WX_LIBS)
+AC_SUBST(BUILT_WX_LIBS)
+AC_SUBST(STD_BASE_LIBS)
+AC_SUBST(STD_GUI_LIBS)
dnl ---------------------------------------------------------------------------
dnl Output the makefiles and such from the results found above
dnl ---------------------------------------------------------------------------
dnl all additional libraries (except wxWidgets itself) we link with
-
+EXTRA_FRAMEWORKS=
if test "$wxUSE_MAC" = 1 ; then
- if test "$wxUSE_SOUND" = "yes" || test "$wxUSE_MEDIACTRL" = "yes"; then
- if test "$USE_DARWIN" = 1; then
- LDFLAGS="$LDFLAGS -framework QuickTime"
+ if test "$USE_DARWIN" = 1; then
+ if test "$wxUSE_OSX_IPHONE" = 1; then
+ EXTRA_FRAMEWORKS="-framework IOKit -framework UIKit -framework CFNetwork -framework AudioToolbox -framework CoreFoundation -framework CoreGraphics -framework OpenGLES -framework Foundation -framework QuartzCore"
else
- LDFLAGS="$LDFLAGS -lQuickTimeLib"
+ EXTRA_FRAMEWORKS="-framework IOKit -framework Carbon -framework Cocoa -framework AudioToolbox -framework System -framework OpenGL -framework QuickTime"
fi
fi
- if test "$USE_DARWIN" = 1; then
- LDFLAGS="$LDFLAGS -framework IOKit -framework Carbon -framework Cocoa -framework System"
- else
- LDFLAGS="$LDFLAGS -lCarbonLib"
- fi
fi
-if test "$wxUSE_COCOA" = 1 ; then
- LDFLAGS="$LDFLAGS -framework IOKit -framework Cocoa"
+if test "$wxUSE_OLD_COCOA" = 1 ; then
+ EXTRA_FRAMEWORKS="-framework IOKit -framework Cocoa"
if test "$wxUSE_MEDIACTRL" = "yes"; then
- LDFLAGS="$LDFLAGS -framework QuickTime"
+ EXTRA_FRAMEWORKS="$EXTRA_FRAMEWORKS -framework QuickTime"
fi
fi
-if test "$USE_DARWIN" = 1 -a "$wxUSE_MAC" != 1 -a "$wxUSE_COCOA" != 1 ; then
- LDFLAGS="$LDFLAGS -framework IOKit -framework CoreServices -framework System -framework ApplicationServices"
+if test "$USE_DARWIN" = 1 -a "$wxUSE_MAC" != 1 -a "$wxUSE_OLD_COCOA" != 1 ; then
+ EXTRA_FRAMEWORKS="$EXTRA_FRAMEWORKS -framework IOKit -framework CoreServices -framework System -framework ApplicationServices"
fi
+LDFLAGS="$LDFLAGS $EXTRA_FRAMEWORKS"
+WXCONFIG_LDFLAGS="$WXCONFIG_LDFLAGS $EXTRA_FRAMEWORKS"
+
LIBS="$ZLIB_LINK $POSIX4_LINK $INET_LINK $WCHAR_LINK $DL_LINK $LIBS"
if test "$wxUSE_GUI" = "yes"; then
dnl TODO some samples are never built so far: mfc (requires VC++)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS artprov controls dialogs drawing \
- dynamic erase event exec font image minimal mobile \
- mobile/wxedit mobile/styles propsize render \
- rotate shaped svg taborder vscroll widgets"
+ erase event exec font image minimal render \
+ shaped svg taborder vscroll widgets wrapsizer"
if test "$wxUSE_MONOLITHIC" != "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS console"
if test "$TOOLKIT" = "MSW"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS regtest"
if test "$wxUSE_UNIVERSAL" != "yes"; then
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ownerdrw nativdlg"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ownerdrw nativdlg dll"
fi
fi
if test "$TOOLKIT" = "PM" -a "$wxUSE_UNIVERSAL" != "yes"; then
fi
else
SAMPLES_SUBDIRS="console"
+ if test "$wxUSE_SOCKETS" = "yes" ; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sockets"
+ fi
+ if test "$wxUSE_IPC" = "yes" ; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ipc"
+ fi
fi
if test "x$INTELCC" = "xyes" ; then
dnl Warnings which can't be easily suppressed in C code are disabled:
dnl
- dnl remark #810: conversion from "x" to "y" may lose significant bits
- dnl remark #869: parameter "foo" was never referenced
- dnl remark #1572: floating-point equality and inequality comparisons
- dnl are unreliable
- dnl remark #1684: conversion from pointer to same-sized integral type
- dnl
- dnl (for others see below)
- CWARNINGS="-Wall -wd810,869,981,1418,1572,1684"
+ dnl #810: conversion from "x" to "y" may lose significant bits
+ dnl #869: parameter "foo" was never referenced
+ dnl #1572: floating-point equality and inequality comparisons
+ dnl are unreliable
+ dnl #1684: conversion from pointer to same-sized integral type
+ dnl #2259: non-pointer conversion from "x" to "y" may lose significant
+ dnl bits
+ CWARNINGS="-Wall -wd810,869,981,1418,1572,1684,2259"
elif test "$GCC" = yes ; then
CWARNINGS="-Wall -Wundef"
fi
dnl (279) are generated for standard macros and so there is nothing we can
dnl do about them
dnl
- dnl remark #279: controlling expression is constant
- dnl remark #383: value copied to temporary, reference to temporary used
- dnl remark #444: destructor for base class "xxx" is not virtual
- dnl remark #810: conversion from "x" to "y" may lose significant bits
- dnl remark #869: parameter "foo" was never referenced
- dnl remark #981: operands are evaluated in unspecified order
- dnl remark #1418: external definition with no prior declaration
- dnl remark #1419: external declaration in primary source file
- CXXWARNINGS="-Wall -wd279,383,444,810,869,981,1418,1419"
+ dnl #279: controlling expression is constant
+ dnl #383: value copied to temporary, reference to temporary used
+ dnl #444: destructor for base class "xxx" is not virtual
+ dnl #981: operands are evaluated in unspecified order
+ dnl #1418: external definition with no prior declaration
+ dnl #1419: external declaration in primary source file
+ dnl #1881: argument must be a constant null pointer value
+ dnl
+ dnl (for others see CWARNINGS above)
+ CXXWARNINGS="-Wall -wd279,383,444,810,869,981,1418,1419,1881,2259"
elif test "$GXX" = yes ; then
- dnl CXXWARNINGS="-Wall -W -Wcast-qual -Werror"
- CXXWARNINGS="-Wall -Wundef -Wno-ctor-dtor-privacy"
+ CXXWARNINGS="-Wall -Wundef -Wunused-parameter -Wno-ctor-dtor-privacy"
+ AX_CXXFLAGS_GCC_OPTION(-Woverloaded-virtual, CXXWARNINGS)
+
+ dnl when building under Mac we currently get hundreds of deprecation
+ dnl warnings for Carbon symbols from the standard headers -- disable them
+ dnl as we already know that they're deprecated and nothing else can be seen
+ dnl with these warnings on
+ if test "$wxUSE_MAC" = 1 ; then
+ CXXWARNINGS="$CXXWARNINGS -Wno-deprecated-declarations"
+ fi
fi
C_AND_CXX_FLAGS="$DEBUG_CFLAGS $PROFILE_FLAGS $OPTIMISE_CFLAGS"
CFLAGS=`echo $WXCONFIG_CFLAGS $CWARNINGS $C_AND_CXX_FLAGS $CFLAGS `
-CXXFLAGS=`echo $WXCONFIG_CXXFLAGS $CXXWARNINGS $C_AND_CXX_FLAGS $CXXFLAGS `
+CXXFLAGS=`echo $WXCONFIG_CXXFLAGS $C_AND_CXX_FLAGS $CXXFLAGS `
+OBJCFLAGS=`echo $WXCONFIG_CFLAGS $CWARNINGS $C_AND_CXX_FLAGS $OBJCFLAGS `
+OBJCXXFLAGS=`echo $WXCONFIG_CXXFLAGS $C_AND_CXX_FLAGS $OBJCXXFLAGS `
dnl now that we added WXCONFIG_CPPFLAGS to CPPFLAGS we can add the wx-config
dnl only stuff to it
EXTRALIBS="$LDFLAGS $LDFLAGS_VERSIONING $LIBS $DMALLOC_LIBS"
EXTRALIBS_XML="$EXPAT_LINK"
EXTRALIBS_HTML="$MSPACK_LINK"
-EXTRALIBS_ODBC="$ODBC_LINK"
-EXTRALIBS_STC="-lwxscintilla${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX}"
+EXTRALIBS_MEDIA="$GST_LIBS"
+EXTRALIBS_STC="-lwxscintilla${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX}"
if test "$wxUSE_GUI" = "yes"; then
EXTRALIBS_GUI=`echo $GUI_TK_LIBRARY $PNG_LINK $JPEG_LINK $TIFF_LINK $WEBKIT_LINK $EXTRALIBS_HILDON $EXTRALIBS_GNOMEVFS $EXTRALIBS_GNOMEPRINT`
fi
if test "$wxUSE_EXPAT" = "builtin" ; then
wxconfig_3rdparty="expat $wxconfig_3rdparty"
fi
-if test "$wxUSE_ODBC" = "builtin" ; then
- wxconfig_3rdparty="odbc $wxconfig_3rdparty"
-fi
if test "$wxUSE_LIBTIFF" = "builtin" ; then
wxconfig_3rdparty="tiff $wxconfig_3rdparty"
fi
fi
for i in $wxconfig_3rdparty ; do
- WXCONFIG_LIBS="-lwx${i}${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX} $WXCONFIG_LIBS"
+ WXCONFIG_LIBS="-lwx${i}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX} $WXCONFIG_LIBS"
done
;;
*)
- for t in `echo $wxUNIV_THEMES | tr , ' ' | tr a-z A-Z`; do
+ for t in `echo $wxUNIV_THEMES | tr , ' ' | tr '[[a-z]]' '[[A-Z]]'`; do
AC_DEFINE_UNQUOTED(wxUSE_THEME_$t)
done
esac
AC_SUBST(wxUSE_ZLIB)
AC_SUBST(wxUSE_REGEX)
AC_SUBST(wxUSE_EXPAT)
-AC_SUBST(wxUSE_ODBC)
AC_SUBST(wxUSE_LIBJPEG)
AC_SUBST(wxUSE_LIBPNG)
AC_SUBST(wxUSE_LIBTIFF)
USE_PLUGINS=0
fi
-if test $wxUSE_ODBC != "no" ; then
- USE_ODBC=1
-else
- USE_ODBC=0
-fi
-
if test "$wxUSE_DEBUGREPORT" = "yes" ; then
USE_QA=1
else
AC_SUBST(MONOLITHIC)
AC_SUBST(USE_PLUGINS)
AC_SUBST(LIBS)
+AC_SUBST(CXXWARNINGS)
AC_SUBST(EXTRALIBS)
AC_SUBST(EXTRALIBS_XML)
AC_SUBST(EXTRALIBS_HTML)
-AC_SUBST(EXTRALIBS_ODBC)
+AC_SUBST(EXTRALIBS_MEDIA)
AC_SUBST(EXTRALIBS_GUI)
AC_SUBST(EXTRALIBS_OPENGL)
AC_SUBST(EXTRALIBS_SDL)
+AC_SUBST(EXTRALIBS_STC)
AC_SUBST(WITH_PLUGIN_SDL)
+AC_SUBST(EXTRALIBS_GTKPRINT)
AC_SUBST(EXTRALIBS_GNOMEPRINT)
AC_SUBST(EXTRALIBS_GNOMEVFS)
AC_SUBST(EXTRALIBS_HILDON)
AC_SUBST(UNICODE)
-AC_SUBST(BUILD)
AC_SUBST(DEBUG_INFO)
AC_SUBST(DEBUG_FLAG)
-TOOLKIT_LOWERCASE=`echo $TOOLKIT | tr "[[A-Z]]" "[[a-z]]"`
+TOOLKIT_LOWERCASE=`echo $TOOLKIT | tr '[[A-Z]]' '[[a-z]]'`
AC_SUBST(TOOLKIT_LOWERCASE)
AC_SUBST(TOOLKIT_VERSION)
+AC_SUBST(DYLIB_RPATH_INSTALL)
+AC_SUBST(DYLIB_RPATH_POSTLINK)
AC_SUBST(SAMPLES_RPATH_FLAG)
-AC_SUBST(SAMPLES_RPATH_POSTLINK)
+AC_SUBST(HEADER_PAD_OPTION)
AC_SUBST(HOST_SUFFIX)
AC_SUBST(CPPUNIT_CFLAGS)
AC_SUBST(CPPUNIT_LIBS)
case "$TOOLKIT" in
GTK)
TOOLKIT_DESC="GTK+"
- if test "$WXGTK20" = 1; then
+ if test "$WXGTK2" = 1; then
TOOLKIT_DESC="$TOOLKIT_DESC 2"
+ if test "$wxUSE_GTKPRINT" = "yes" ; then
+ TOOLKIT_EXTRA="$TOOLKIT_EXTRA GTK+ printing";
+ fi
if test "$wxUSE_LIBGNOMEPRINT" = "yes" ; then
TOOLKIT_EXTRA="$TOOLKIT_EXTRA gnomeprint";
fi
if test "$wxUSE_LIBHILDON" = "yes"; then
TOOLKIT_EXTRA="$TOOLKIT_EXTRA hildon"
fi
+ if test "$wxUSE_LIBHILDON2" = "yes"; then
+ TOOLKIT_EXTRA="$TOOLKIT_EXTRA hildon"
+ fi
if test "$TOOLKIT_EXTRA" != ""; then
TOOLKIT_DESC="$TOOLKIT_DESC with support for `echo $TOOLKIT_EXTRA | tr -s ' '`"
BAKEFILE_FORCE_PLATFORM=win32
fi
-dnl ---------------------------------------------------------------------------
-dnl Add Universal binary support
-dnl Note we don't do this earlier because adding these cpp/ld flags could
-dnl cause configure tests to fail.
-dnl ---------------------------------------------------------------------------
-if test "$wxUSE_MAC" = 1 ; then
- if test "x$wxUSE_UNIVERSAL_BINARY" != xno ; then
- dnl --enable-universal_binary uses a default SDK (currently 10.4u)
- dnl --enable-universal_binary=SDK names a path to an SDK
- if test "x$wxUSE_UNIVERSAL_BINARY" == xyes; then
- OSX_UNIV_OPTS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
- else
- dnl '' would mean universal with no SDK, which may be the case if
- dnl the compiler uses a sysroot by default
- OSX_UNIV_OPTS=${wxUSE_UNIVERSAL_BINARY:+"-isysroot '$wxUSE_UNIVERSAL_BINARY'"}
- fi
- OSX_UNIV_OPTS="$OSX_UNIV_OPTS -arch ppc -arch i386"
- CXXFLAGS="$OSX_UNIV_OPTS $CXXFLAGS"
- CFLAGS="$OSX_UNIV_OPTS $CFLAGS"
- LDFLAGS="$OSX_UNIV_OPTS $LDFLAGS"
- bk_use_pch=no
- fi
- # TODO: where do we add "-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk" for libtool (static builds only)?
- # The makefile currently uses AR and RANLIB, which libtool apparently supercedes.
-fi
-
dnl gcc 3.4 has a pch bug which truncates wide character constants in headers.
dnl Hopefully for a non-unicode build there aren't any wide constants in
dnl headers, but for a unicode build it's best to disable pch.
AC_BAKEFILE([m4_include(autoconf_inc.m4)])
+dnl make install path absolute (if not already);
+dnl will fail with (some) MSDOS paths
+case ${INSTALL} in
+ /* ) # Absolute
+ ;;
+ ?:* ) # Drive letter, considered as absolute.
+ ;;
+ *)
+ INSTALL=`pwd`/${INSTALL} ;;
+esac
+
+if test "$wxUSE_GUI" = "yes"; then
+
+if test "$wxUSE_MSW" = 1 ; then
+ if test "x$WINDRES" = "x"; then
+ AC_MSG_ERROR([Required windres program not found])
+ fi
+
+ RESCOMP="$WINDRES"
+fi
+
+if test "$wxUSE_MAC" = 1 -o "$wxUSE_OLD_COCOA" = 1; then
+ dnl base name of the resource file for wxMac must be the same
+ dnl as library installation base name (-install_name)
+ WX_RESOURCES_MACOSX_ASCII="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.r"
+ WX_RESOURCES_MACOSX_DATA="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.rsrc"
+
+ dnl add the resources target for wxMac
+ LIBWXMACRES="\$(wx_top_builddir)/lib/${WX_RESOURCES_MACOSX_ASCII}"
+
+ AC_CHECK_PROG(DEREZ, DeRez, DeRez, /Developer/Tools/DeRez)
+
+ MACSETFILE="\$(SETFILE)"
+
+ dnl resources are bundled both with shared library and applications
+ dnl since the carb resource *must* be included in the application
+ if test "$wxUSE_OSX_CARBON" = 1; then
+ POSTLINK_COMMAND="\$(REZ) -d __DARWIN__ -t APPL Carbon.r -o"
+ RESCOMP="$REZ"
+ WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL Carbon.r -o"
+ else
+ POSTLINK_COMMAND="cat /dev/null | \$(REZ) -d __DARWIN__ -t APPL ${LIBWXMACRES}"
+ RESCOMP="cat /dev/null \| $REZ"
+ WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL \$libdir/$WX_RESOURCES_MACOSX_ASCII"
+ fi
+
+else
+ dnl default value is to (silently) do nothing in the makefile
+ MACSETFILE="@true"
+
+ if test "$wxUSE_PM" = 1; then
+ RESCOMP="emxbind"
+ WXCONFIG_RESFLAGS="-ep"
+
+ dnl Is this one really used anywhere for pm?
+ POSTLINK_COMMAND="$RESCOMP $WXCONFIG_RESFLAGS"
+ else
+ POSTLINK_COMMAND="@true"
+ fi
+fi
+
+fi
+dnl wxUSE_GUI = 1
+
+
dnl find out if the compiler supports PCH
dnl
dnl TODO: this should be in bakefile
AC_MSG_WARN([*** see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=13361])
fi
- CPPFLAGS="-DWX_PRECOMP $CPPFLAGS"
+ # Our WX_PRECOMP flag does not make sense for any language except C++ because
+ # the headers that benefit from precompilation are mostly C++ headers.
+ CXXFLAGS="-DWX_PRECOMP $CXXFLAGS"
+ # When Bakefile can do multi-language PCH (e.g. C++ and Objective-C++) enable this:
+ #OBJCXXFLAGS="-DWX_PRECOMP $CXXFLAGS"
fi
dnl HACK ALERT!!
fi
if test "$wxUSE_SHARED" = "yes"; then
-
- dnl We get the shared build linker from bakefile, since it
- dnl moved all the logic for this out of this file and into
- dnl its own macro. But it can't decide on whether to return
- dnl us $(VAR), ${VAR}, or the present expansion of VAR.
- dnl So normalise and expand everything here now, because its
- dnl not going to change inside wx-config anyway.
- sanitised_bakefile_mess=`echo "$SHARED_LD_CXX" | tr -d '()'`
- EXE_LINKER=`eval echo "$sanitised_bakefile_mess"`
-
dnl Need addtional flag on OS/2, so override bakefiles value
dnl (there currently is no suitable variable to which the
dnl missing flags could be added, AFAICS. SN, 18.12.2004. )
cp -p ${srcdir}/src/os2/dllar.sh .
;;
esac
-else
-
- dnl No bakefile support for static builds, but this should be ok for most.
- EXE_LINKER="$CXX -o"
-
fi
if test "$wxUSE_OMF" = "yes"; then
case "${host}" in
dnl TOOLCHAIN_DEFS should be used for both wx and client code
WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS $TOOLCHAIN_DEFS"
+
+dnl Sun cc is compatible with gcc and so either of them can use the C
+dnl libraries built with the other, i.e. gcc can be used to build wxGTK under
+dnl Solaris where GTK+ is compiled using cc and cc can be used under Linux
+dnl where GTK+ is built with gcc
+dnl
+dnl However the compiler options are not compatible at all and in particular
+dnl gcc doesn't like cc -mt option and cc doesn't like -pthread. We simply
+dnl filter them out as we already have the correct options for multithreaded
+dnl programs if we're using threads (and if we don't, it shouldn't matter)
+case "${host}" in
+ *-*-solaris2* )
+ dnl system packages are compiled with Sun CC and so pkg-config outputs
+ dnl CC-specific "-mt" flag, remove it when using gcc
+ if test "$GCC" = yes; then
+ CPPFLAGS=`echo $CPPFLAGS | sed 's/-mt//'`
+ LIBS=`echo $LIBS | sed 's/-mt//'`
+ EXTRALIBS_GUI=`echo $EXTRALIBS_GUI | sed 's/-mt//'`
+ fi
+ ;;
+
+ *-*-linux* )
+ dnl OTOH when using Sun CC under Linux, the flags contain gcc-specific
+ dnl -pthreads which Sun CC doesn't know about
+ if test "x$SUNCXX" = xyes; then
+ CPPFLAGS=`echo $CPPFLAGS | sed 's/-pthread//'`
+ LIBS=`echo $LIBS | sed 's/-pthread//'`
+ EXTRALIBS_GUI=`echo $EXTRALIBS_GUI | sed 's/-pthread//'`
+ fi
+ ;;
+esac
+
+dnl Add visibility support flags to CFLAGS/CXXFLAGS - do it this late so that
+dnl it doesn't affect compilation checks above
+CFLAGS="$CFLAGS $CFLAGS_VISIBILITY"
+CXXFLAGS="$CXXFLAGS $CXXFLAGS_VISIBILITY"
+OBJCFLAGS="$OBJCFLAGS $CFLAGS_VISIBILITY"
+OBJCXXFLAGS="$OBJCXXFLAGS $CXXFLAGS_VISIBILITY"
+
dnl for convenience, sort the samples in alphabetical order
dnl
dnl FIXME For some mysterious reasons, sometimes the directories are duplicated
AC_SUBST(WX_VERSION)
AC_SUBST(WX_SUBVERSION)
AC_SUBST(WX_CHARTYPE)
-AC_SUBST(WX_DEBUGTYPE)
dnl note that in addition to the usual CPP/C/CXXFLAGS which are used for
dnl building the library itself, we also have WXCONFIG_-prefixed variants which
AC_SUBST(WXCONFIG_LIBS)
AC_SUBST(WXCONFIG_RPATH)
+AC_SUBST(WXCONFIG_LDFLAGS)
AC_SUBST(WXCONFIG_LDFLAGS_GUI)
AC_SUBST(WXCONFIG_RESFLAGS)
-AC_SUBST(EXE_LINKER)
dnl distribution vars
AC_SUBST(GUIDIST)
AC_CONFIG_HEADERS([lib/wx/include/${TOOLCHAIN_FULLNAME}/wx/setup.h:setup.h.in])
if test "$USE_WIN32" = 1; then
- AC_CONFIG_COMMANDS(
- [
- rcdefs.h
- ],
+ AC_CONFIG_COMMANDS([rcdefs.h],
[
mkdir -p $outdir &&
$CPP $infile | sed 's/^# *[1-9].*//;s/^ *//;/./,/^$/!d' > $outdir/rcdefs.h
[ chmod +x lib/wx/config/inplace-${TOOLCHAIN_FULLNAME} ],
[ TOOLCHAIN_FULLNAME="${TOOLCHAIN_FULLNAME}" ])
+dnl this is used to run ifacecheck with the same flags used by the compiler
+dnl for the real compilation:
+AC_CONFIG_FILES([ utils/ifacecheck/rungccxml.sh ],
+ [ chmod +x utils/ifacecheck/rungccxml.sh ])
+
if test "$wx_cv_version_script" = "yes"; then
AC_CONFIG_FILES(version-script)
fi
dnl Configure samples, demos etc. directories, but only if they are present:
if test "$wxUSE_GUI" = "yes"; then
SUBDIRS="samples demos utils"
-else dnl we build wxBase only
+else
+ dnl we build wxBase only
dnl there are no wxBase programs in demos
SUBDIRS="samples utils"
fi
dnl Add tests to the list of subdirs if cppunit 1.8.0+ is detected
AM_PATH_CPPUNIT(1.8.0, [SUBDIRS="$SUBDIRS tests"])
-for subdir in `echo $SUBDIRS`; do
+for subdir in $SUBDIRS; do
if test -d ${srcdir}/${subdir} ; then
if test "$wxUSE_GUI" = "yes"; then
if test ${subdir} = "samples"; then
dnl only take those samples which compile in the current
dnl configuration and which exist
makefiles="samples/Makefile.in $makefiles"
- for sample in `echo $SAMPLES_SUBDIRS`; do
+ for sample in $SAMPLES_SUBDIRS; do
if test -d $srcdir/samples/$sample; then
makefiles="samples/$sample/Makefile.in $makefiles"
fi
dnl assume that everything compiles for utils &c
dnl any that shouldn't be built can be added to
dnl DISABLED_UTILS, DISABLED_DEMOS
- disabled_var=DISABLED_`echo $subdir | tr [[a-z]] [[A-Z]]`;
+ disabled_var=DISABLED_`echo $subdir | tr '[[a-z]]' '[[A-Z]]'`
eval "disabled=\$$disabled_var"
disabled=/`echo X $disabled | sed 's@ @/|/@g'`/
makefiles=`(cd $srcdir ; find $subdir -name Makefile.in) | $EGREP -v "$disabled"`
fi
- else dnl we build wxBase only
- dnl don't take all samples/utils, just those which build with
- dnl wxBase
+ else
+ dnl we build wxBase only
+ dnl don't take all samples/utils, just those which build with wxBase
if test ${subdir} = "samples"; then
- makefiles="samples/Makefile.in samples/console/Makefile.in"
+ dnl only take those samples which compile in the current
+ dnl configuration and which exist
+ makefiles="samples/Makefile.in $makefiles"
+ for sample in `echo $SAMPLES_SUBDIRS`; do
+ if test -d $srcdir/samples/$sample; then
+ makefiles="samples/$sample/Makefile.in $makefiles"
+ fi
+ done
elif test ${subdir} = "utils"; then
makefiles=""
- for util in HelpGen tex2rtf ; do
+ for util in ifacecheck ; do
if test -d $srcdir/utils/$util ; then
- makefiles="utils/$util/Makefile.in \
- utils/$util/src/Makefile.in \
+ makefiles="utils/$util/src/Makefile.in \
$makefiles"
fi
done
- else dnl assume that everything compiles for tests
+ else
+ dnl assume that everything compiles for tests
makefiles=`(cd $srcdir ; find $subdir -name Makefile.in)`
fi
fi
echo ""
echo " Which GUI toolkit should wxWidgets use? ${TOOLKIT_DESC}"
echo " Should wxWidgets be compiled into single library? ${wxUSE_MONOLITHIC:-yes}"
-
-echo " Should wxWidgets be compiled in debug mode? ${wxUSE_DEBUG:-no}"
echo " Should wxWidgets be linked as a shared library? ${wxUSE_SHARED:-no}"
-echo " Should wxWidgets be compiled in Unicode mode? ${wxUSE_UNICODE:-no}"
+echo $ECHO_N " Should wxWidgets support Unicode? ${wxUSE_UNICODE:-no}$ECHO_C"
+if test "$wxUSE_UNICODE" = "yes"; then
+ if test "$wxUSE_UNICODE_UTF8" = "yes"; then
+ echo " (using UTF-8)"
+ else
+ echo " (using wchar_t)"
+ fi
+else
+ echo
+fi
echo " What level of wxWidgets compatibility should be enabled?"
echo " wxWidgets 2.6 ${WXWIN_COMPATIBILITY_2_6:-no}"
echo " wxWidgets 2.8 ${WXWIN_COMPATIBILITY_2_8:-yes}"
echo " Which libraries should wxWidgets use?"
+echo " STL ${wxUSE_STL}"
echo " jpeg ${wxUSE_LIBJPEG-none}"
echo " png ${wxUSE_LIBPNG-none}"
echo " regex ${wxUSE_REGEX}"
echo " xpm ${wxUSE_LIBXPM-none}"
fi
echo " zlib ${wxUSE_ZLIB}"
-echo " odbc ${wxUSE_ODBC}"
echo " expat ${wxUSE_EXPAT}"
echo " libmspack ${wxUSE_LIBMSPACK}"
echo " sdl ${wxUSE_LIBSDL}"
projects / wxWidgets.git / blobdiff