+Watcom C++ is a little slow and the debugger is not really up to today's standards.<P>
+
+Among the free compilers the best choice seem to be Borland C++ command line
+tools and mingw32 (port of gcc to Win32). Both of them are supported by
+wxWindows.
+
+<h3><a name="unicode">Is Unicode supported?</a></h3>
+
+Yes, Unicode is fully supported under Windows NT/2000 and there is limited
+support for it under Windows 9x using <a
+href="http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx">MSLU</a>.
+<p>
+
+<h3><a name="doublebyte">Does wxWindows support double byte fonts (Chinese/Japanese/Korean etc.)?</a></h3>
+
+For Japanese under Win2000, it seems that wxWindows has no problems to work
+with double byte char sets (meaning DBCS, not Unicode). First you have to
+install Japanese support on your Win2K system and choose for ANSI translation
+<tt>HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nls\CodePage=932</tt>
+(default is 1252 for Western). Then you can see all the Japanese letters in
+wxWindows applications.
+<p>
+
+<h3><a name="dll">Can you compile wxWindows 2 as a DLL?</a></h3>
+
+Yes (using the Visual C++ or Borland C++ makefile), but be aware that distributing DLLs is a thorny issue
+and you may be better off compiling statically-linked applications, unless you're
+delivering a suite of separate programs, or you're compiling a lot of wxWindows applications
+and have limited hard disk space.<P>
+
+With a DLL approach, and with different versions and configurations of wxWindows
+needing to be catered for, the end user may end up with a host of large DLLs in his or her Windows system directory,
+negating the point of using DLLs. Of course, this is not a problem just associated with
+wxWindows!
+<P>
+
+<h3><a name="exesize">How can I reduce executable size?</a></h3>
+
+You can compile wxWindows as a DLL (see above, VC++/BC++ only at present). You should also
+compile your programs for release using non-debugging and space-optimisation options, but
+take with VC++ 5/6 space optimisation: it can sometimes cause problems.<P>
+
+If you want to distribute really small executables, you can
+use <a href="http://www.un4seen.com/petite/" target=_top>Petite</a>
+by Ian Luck. This nifty utility compresses Windows executables by around 50%, so your 500KB executable
+will shrink to a mere 250KB. With this sort of size, there is reduced incentive to
+use DLLs. Another good compression tool (probably better than Petite) is <a href="http://upx.sourceforge.net/" target=_top>UPX</a>.
+<P>
+
+Please do not be surprised if MinGW produces a statically-linked minimal executable of 1 MB. Firstly, gcc
+produces larger executables than some compilers. Secondly, this figure will
+include most of the overhead of wxWindows, so as your application becomes more
+complex, the overhead becomes proportionally less significant. And thirdly, trading executable compactness
+for the enormous increase in productivity you get with wxWindows is almost always well worth it.<P>
+
+If you have a really large executable compiled with MinGW (for example 20MB) then
+you need to configure wxWindows to compile without debugging information: see
+docs/msw/install.txt for details. You may find that using configure instead
+of makefile.g95 is easier, particularly since you can maintain debug and
+release versions of the library simultaneously, in different directories.
+Also, run 'strip' after linking to remove all traces of debug info.
+<P>
+
+<H3><a name="mfc">Is wxWindows compatible with MFC?</a></H3>
+
+There is a sample which demonstrates MFC and wxWindows code co-existing in the same
+application. However, don't expect to be able to enable wxWindows windows with OLE-2
+functionality using MFC.<P>
+
+<H3><a name="setuph">Why do I get errors about setup.h not being found?</a></H3>
+
+When you build the wxWindows library, setup.h is copied
+from include/wx/msw/setup.h to e.g. lib/mswd/wx/setup.h (the path
+depends on the configuration you're building). So you need to add
+this include path if building using the static Debug library:<P>
+
+lib/mswd<P>
+
+or if building the static Release library, lib/msw.<P>
+
+See also the <a href="http://wiki.wxwindows.org/wiki.pl?Table_Of_Contents">wxWiki Contents</a>
+for more information.<P>
+
+
+<H3><a name="asuffix">Why do I get errors about FooBarA when I only use FooBar in my program?</H3>
+
+If you get errors like
+<p>
+<center>
+<tt>no matching function for call to 'wxDC::DrawTextA(const char[5], int,
+int)'</tt>
+</center>
+<p>
+or similar ones for the other functions, i.e. the compiler error messages
+mention the function with the <tt>'A'</tt> suffix while you didn't
+use it in your code, the explanation is that you had included
+<tt><windows.h></tt> header which redefines many symbols to have such
+suffix (or <tt>'W'</tt> in the Unicode builds).
+
+<p>
+The fix is to either not include <tt><windows.h></tt> at all or include
+<tt>"wx/msw/winundef.h"</tt> immediately after it.
+
+<H3><a name="newerrors">Why my code fails to compile with strange errors about new operator?</a></H3>
+
+The most common cause of this problem is the memory debugging settings in
+<tt>wx/msw/setup.h</tt>. You have several choices:
+
+<ul>
+ <li> Either disable overloading the global operator new completely by
+ setting <tt>wxUSE_GLOBAL_MEMORY_OPERATORS</tt> and
+ <tt>wxUSE_DEBUG_NEW_ALWAYS</tt> to 0 in this file
+ <li> Or leave them on but do <tt>#undef new</tt> after including any
+ wxWindows headers, like this the memory debugging will be still on
+ for wxWindows sources but off for your own code
+</ul>
+
+Notice that IMHO the first solution is preferable for VC++ users who can use
+the <a href="#vcdebug">VC++ CRT memory debugging features</a> instead.
+
+<H3><a name="mfcport">How do I port MFC applications to wxWindows?</a></H3>
+
+Set up your interface from scratch using wxWindows (especially <a href="http://www.robeling.de" target=_top>wxDesigner</a>
+or <a href="http://www.anthemion.co.uk/dialogblocks/" target=_new>DialogBlocks</a> --
+it'll save you a <i>lot</i> of time) and when you have a shell prepared, you can start
+'pouring in' code from the MFC app, with appropriate
+modifications. This is the approach I have used, and I found
+it very satisfactory. A two-step process then - reproduce the bare
+interface first, then wire it up afterwards. That way you deal
+with each area of complexity separately. Don't try to think MFC
+and wxWindows simultaneously from the beginning - it is easier to
+reproduce the initial UI by looking at the behaviour of the MFC
+app, not its code.
+
+<H3><a name="crash">Why do I sometimes get bizarre crash problems using VC++ 5/6?</a></H3>
+
+Some crash problems can be due to inconsistent compiler
+options (and of course this isn't limited to wxWindows).
+If strange/weird/impossible things start to happen please
+check (dumping IDE project file as makefile and doing text comparison
+if necessary) that the project settings, especially the list of defined
+symbols, struct packing, etc. are exactly the same for all items in
+the project. After this, delete everything (including PCH) and recompile.<P>
+
+VC++ 5's optimization code seems to be broken and can
+cause problems: this can be seen when deleting an object Dialog
+Editor, in Release mode with optimizations on. If in doubt,
+switch off optimisations, although this will result in much
+larger executables. It seems possible that the library can be created with
+strong optimization, so long as the application is not strongly
+optimized. For example, in wxWindows project, set to 'Minimum
+Size'. In Dialog Editor project, set to 'Customize: Favor Small
+Code' (and no others). This will then work.<P>
+
+<H3><a name="makefiles">How are the wxWindows makefiles edited under Windows?</a></H3>
+
+As of wxWindows 2.1, there is a new system written by Vadim Zeitlin, that
+generates the makefiles from templates using tmake.<P>
+
+Here are Vadim's notes:<P>
+
+<blockquote>
+To use these new makefiles, you don't need anything (but see below).
+However, you should NOT modify them because these files will be
+rewritten when I regenerate them using tmake the next time. So, if
+you find a problem with any of these makefiles (say, makefile.b32)
+you'll need to modify the corresponding template (b32.t in this
+example) and regenerate the makefile using tmake.<P>
+
+tmake can be found at
+<a href="http://www.troll.no/freebies/tmake.html" target=_new>www.troll.no/freebies/tmake.html</a>.
+It's a Perl5 program and so it needs Perl (doh). There is a binary for
+Windows (available from the same page), but I haven't used it, so
+I don't know if it works as flawlessly as "perl tmake" does (note
+for people knowing Perl: don't try to run tmake with -w, it won't
+do you any good). Using it extremely simple: to regenerate makefile.b32
+just go to distrib/msw/tmake and type<P>
+
+<pre>tmake -t b32 wxwin.pro -o ../../src/msw/makefile.b32</pre><P>
+
+The makefiles are untested - I don't have any of Borland, Watcom or
+Symantec and I don't have enough diskspace to recompile even with
+VC6 using makefiles. The new makefiles are as close as possible to the
+old ones, but not closer: in fact, there has been many strange things
+(should I say bugs?) in some of makefiles, some files were not compiled
+without any reason etc. Please test them and notify me about any problems.
+Better yet, modify the template files to generate the correct makefiles
+and check them in.<P>
+
+The templates are described in tmake ref manual (1-2 pages of text)
+and are quite simple. They do contain some Perl code, but my Perl is
+primitive (very C like) so it should be possible for anybody to make
+trivial modifications to it (I hope that only trivial modifications
+will be needed). I've tagged the ol makefiles as MAKEFILES_WITHOUT_TMAKE
+in the cvs, so you can always retrieve them and compare the new ones,
+this will make it easier to solve the problems you might have.<P>
+
+Another important file is filelist.txt: it contains the list of all
+files to be compiled. Some of them are only compiled in 16/32 bit mode.
+Some other are only compiled with some compilers (others can't compile
+them) - all this info is contained in this file.<P>
+
+So now adding a new file to wxWindows is as easy as modifying filelist.txt
+(and Makefile.ams for Unix ports) and regenerating the makefiles - no
+need to modify all files manually any more.<P>
+
+ Finally, there is also a file vc6.t which I use myself: this one
+generates a project file for VC++ 6.0 (I didn't create vc5.t because
+I don't need it and can't test it, but it should be trivial to create
+one from vc6.t - probably the only things to change would be the
+version number in the very beginning and the /Z option - VC5 doesn't
+support edit-and=continue). This is not an officially supported way
+of building wxWindows (that is, nobody guarantees that it will work),
+but it has been very useful to me and I hope it will be also for
+others. To generate wxWindows.dsp run<P>
+
+<pre>tmake -t vc6 wxwin.pro -o ../../wxWindows.dsp</pre><P>
+
+Then just include this project in any workspace or open it from VC IDE
+and it will create a new workspace for you.<P>
+
+If all goes well, I'm planning to create a template file for Makefile.ams
+under src/gtk and src/motif and also replace all makefiles in the samples
+subdirectories with the project files from which all the others will be
+generated. At least it will divide the number of files in samples
+directory by 10 (and the number of files to be maintained too).
+</blockquote>
+
+<P>
+
+<H3><a name="vcdebug">How do you use VC++'s memory leak checking instead of that in wxWindows?</a></H3>
projects / wxWidgets.git / blobdiff