\helpref{wxFindWindowAtPoint}{wxfindwindowatpoint}\\
\helpref{wxFindWindowByLabel}{wxfindwindowbylabel}\\
\helpref{wxFindWindowByName}{wxfindwindowbyname}\\
+\helpref{wxFinite}{wxfinite}\\
\helpref{wxGetActiveWindow}{wxgetactivewindow}\\
+\helpref{wxGetApp}{wxgetapp}\\
\helpref{wxGetClipboardData}{wxgetclipboarddata}\\
\helpref{wxGetClipboardFormatName}{wxgetclipboardformatname}\\
\helpref{wxGetColourFromUser}{wxgetcolourfromuser}\\
\helpref{wxIsAbsolutePath}{wxisabsolutepath}\\
\helpref{wxIsBusy}{wxisbusy}\\
\helpref{wxIsClipboardFormatAvailable}{wxisclipboardformatavailable}\\
+\helpref{wxIsDebuggerRunning}{wxisdebuggerrunning}\\
\helpref{wxIsEmpty}{wxisempty}\\
+\helpref{wxIsNaN}{wxisnan}\\
\helpref{wxIsWild}{wxiswild}\\
\helpref{wxKill}{wxkill}\\
\helpref{wxLoadUserResource}{wxloaduserresource}\\
\helpref{wxRegisterId}{wxregisterid}\\
\helpref{wxRemoveFile}{wxremovefile}\\
\helpref{wxRenameFile}{wxrenamefile}\\
-\helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}\\
-\helpref{wxResourceClear}{wxresourceclear}\\
-\helpref{wxResourceCreateBitmap}{wxresourcecreatebitmap}\\
-\helpref{wxResourceCreateIcon}{wxresourcecreateicon}\\
-\helpref{wxResourceCreateMenuBar}{wxresourcecreatemenubar}\\
-\helpref{wxResourceGetIdentifier}{wxresourcegetidentifier}\\
-\helpref{wxResourceParseData}{wxresourcedata}\\
-\helpref{wxResourceParseFile}{wxresourceparsefile}\\
-\helpref{wxResourceParseString}{wxresourceparsestring}\\
-\helpref{wxResourceRegisterBitmapData}{registerbitmapdata}\\
-\helpref{wxResourceRegisterIconData}{wxresourceregistericondata}\\
\helpref{wxRmdir}{wxrmdir}\\
\helpref{wxSafeShowMessage}{wxsafeshowmessage}\\
\helpref{wxSafeYield}{wxsafeyield}\\
\helpref{wxSplitPath}{wxsplitfunction}\\
\helpref{wxStartTimer}{wxstarttimer}\\
\helpref{wxStaticCast}{wxstaticcast}\\
+\helpref{wxStrcmp}{wxstrcmp}\\
\helpref{wxStricmp}{wxstricmp}\\
\helpref{wxStringEq}{wxstringeq}\\
\helpref{wxStringMatch}{wxstringmatch}\\
\helpref{wxStrlen}{wxstrlen}\\
\helpref{wxSysErrorCode}{wxsyserrorcode}\\
\helpref{wxSysErrorMsg}{wxsyserrormsg}\\
+\helpref{wxT}{wxt}\\
\helpref{wxToLower}{wxtolower}\\
\helpref{wxToUpper}{wxtoupper}\\
\helpref{wxTraceLevel}{wxtracelevel}\\
\helpref{wxVsnprintf}{wxvsnprintf}\\
\helpref{wxWakeUpIdle}{wxwakeupidle}\\
\helpref{wxWriteResource}{wxwriteresource}\\
-\helpref{wxYield}{wxyield}
+\helpref{wxYield}{wxyield}\\
+\helpref{\_}{underscore}\\
+\helpref{\_T}{underscoret}
\section{Version macros}\label{versionfunctions}
<wx/app.h>
+
+\membersection{::wxGetApp}\label{wxgetapp}
+
+\func{wxAppDerivedClass\&}{wxGetApp}{\void}
+
+This function doesn't exist in wxWindows but it is created by using
+the \helpref{IMPLEMENT\_APP}{implementapp} macro. Thus, before using it
+anywhere but in the same module where this macro is used, you must make it
+available using \helpref{DECLARE\_APP}{declareapp}.
+
+The advantage of using this function compared to directly using the global
+wxTheApp pointer is that the latter is of type {\tt wxApp *} and so wouldn't
+allow you to access the functions specific to your application class but not
+present in wxApp while wxGetApp() returns the object of the right type.
+
\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = true}}
\wxheading{Include files}
-<wx/app.h>
+<wx/event.h>
\section{Process control functions}\label{processfunctions}
{\it output}. The fourth version adds the possibility to additionally capture
the messages from standard error output in the {\it errors} array.
-See also \helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess},
-\helpref{Exec sample}{sampleexec}.
+{\bf NB:} Currently wxExecute() can only be used from the main thread, calling
+this function from another thread will result in an assert failure in debug
+build and won't work.
+
+\wxheading{See also}
+
+\helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess}, \helpref{Exec sample}{sampleexec}.
\wxheading{Parameters}
\begin{twocollist}\itemsep=0pt
\twocolitemruled{Platform}{Return types}
-\twocolitem{Mac OS}{Return value is wxMAC when compiled with CodeWarrior under Mac OS 8.x/9.x and Mac OS X, wxMAC\_DARWIN when compiled with the Apple Developer Tools under Mac OS X.}
+\twocolitem{Mac OS}{Return value is wxMAC when compiled with CodeWarrior under Mac OS 8.x/9.x and Mac OS X, wxMAC\_DARWIN when compiled with the Apple Developer Tools under Mac OS X.
+
+Both {\it major} and {\it minor} have to be looked at as hexadecimal numbers. So System 10.2.4 returns 0x10, resp 16 for {\it major} and 0x24, resp 36 for {\it minor}. }
\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
\twocolitem{OS/2}{Return value is wxOS2\_PM.}
This function is deprecated, use \helpref{wxString}{wxstring} class instead.
+\membersection{::wxGetTranslation}\label{wxgettranslation}
+
+\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
+
+This function returns the translation of string {\it str} in the current
+\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
+message catalogs (see \helpref{internationalization overview}{internationalization}), the
+original string is returned. In debug build, an error message is logged -- this
+should help to find the strings which were not yet translated. As this function
+is used very often, an alternative (and also common in Unix world) syntax is
+provided: the \helpref{\_()}{underscore} macro is defined to do the same thing
+as wxGetTranslation.
+
\membersection{::wxIsEmpty}\label{wxisempty}
\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
Returns {\tt true} if the pointer is either {\tt NULL} or points to an empty
string, {\tt false} otherwise.
+\membersection{::wxStrcmp}\label{wxstrcmp}
+
+\func{int}{wxStrcmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+
+Returns a negative value, 0, or positive value if {\it p1} is less than, equal
+to or greater than {\it p2}. The comparison is case-sensitive.
+
+This function complements the standard C function {\it stricmp()} which performs
+case-insensitive comparison.
+
\membersection{::wxStricmp}\label{wxstricmp}
\func{int}{wxStricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
same thing (i.e. returns the length of the string) except that it returns 0 if
{\it p} is the {\tt NULL} pointer.
-\membersection{::wxGetTranslation}\label{wxgettranslation}
-
-\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
-
-This function returns the translation of string {\it str} in the current
-\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
-message catalogs (see \helpref{internationalization overview}{internationalization}), the
-original string is returned. In debug build, an error message is logged - this
-should help to find the strings which were not yet translated. As this function
-is used very often, an alternative syntax is provided: the \_() macro is
-defined as wxGetTranslation().
-
\membersection{::wxSnprintf}\label{wxsnprintf}
\func{int}{wxSnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{}{...}}
\helpref{wxVsnprintf}{wxvsnprintf}, \helpref{wxString::Printf}{wxstringprintf}
+\membersection{wxT}\label{wxt}
+
+\func{wxChar}{wxT}{\param{char }{ch}}
+
+\func{const wxChar *}{wxT}{\param{const char *}{s}}
+
+wxT() is a macro which can be used with character and string literals (in other
+words, {\tt 'x'} or {\tt "foo"}) to automatically convert them to Unicode in
+Unicode build configuration. Please see the
+\helpref{Unicode overview}{unicode} for more information.
+
+This macro is simply returns the value passed to it without changes in ASCII
+build. In fact, its definition is:
+\begin{verbatim}
+#ifdef UNICODE
+#define wxT(x) L ## x
+#else // !Unicode
+#define wxT(x) x
+#endif
+\end{verbatim}
+
+\membersection{wxTRANSLATE}\label{wxtranslate}
+
+\func{const wxChar *}{wxTRANSLATE}{\param{const char *}{s}}
+
+This macro doesn't do anything in the program code -- it simply expands to the
+value of its argument (expand in Unicode build where it is equivalent to
+\helpref{wxT}{wxt} which makes it unnecessary to use both wxTRANSLATE and wxT
+with the same string which would be really unreadable).
+
+However it does have a purpose and it is to mark the literal strings for the
+extraction into the message catalog created by {\tt xgettext} program. Usually
+this is achieved using \helpref{\_()}{underscore} but that macro not only marks
+the string for extraction but also expands into
+\helpref{wxGetTranslation}{wxgettranslation} function call which means that it
+cannot be used in some situations, notably for the static arrays
+initialization.
+
+Here is an example which should make it more clear: suppose that you have a
+static array of strings containing the weekday names and which have to be
+translated (note that it is a bad example, really, as
+\helpref{wxDateTime}{wxdatetime} already can be used to get the localized week
+day names already). If you write
+\begin{verbatim}
+static const wxChar * const weekdays[] = { _("Mon"), ..., _("Sun") };
+...
+// use weekdays[n] as usual
+\end{verbatim}
+the code wouldn't compile because the function calls are forbidden in the array
+initializer. So instead you should do
+\begin{verbatim}
+static const wxChar * const weekdays[] = { wxTRANSLATE("Mon"), ..., wxTRANSLATE("Sun") };
+...
+// use wxGetTranslation(weekdays[n])
+\end{verbatim}
+here.
+
+Note that although the code {\bf would} compile if you simply omit
+wxTRANSLATE() in the above, it wouldn't work as expected because there would be
+no translations for the weekday names in the program message catalog and
+wxGetTranslation wouldn't find them.
+
+
\membersection{::wxToLower}\label{wxtolower}
\func{char}{wxToLower}{\param{char }{ch}}
\helpref{wxSnprintf}{wxsnprintf}, \helpref{wxString::PrintfV}{wxstringprintfv}
+
+\membersection{\_}\label{underscore}
+
+\func{const wxChar *}{\_}{\param{const char *}{s}}
+
+This macro expands into a call to \helpref{wxGetTranslation}{wxgettranslation}
+function, so it marks the message for the extraction by {\tt xgettext} just as
+\helpref{wxTRANSLATE}{wxtranslate} does, but also returns the translation of
+the string for the current locale during execution.
+
+Don't confuse this macro with \helpref{\_T()}{underscoret}!
+
+
+\membersection{\_T}\label{underscoret}
+
+\func{wxChar}{\_T}{\param{char }{ch}}
+
+\func{const wxChar *}{\_T}{\param{const wxChar }{ch}}
+
+This macro is exactly the same as \helpref{wxT}{wxt} and is defined in
+wxWindows simply because it may be more intuitive for Windows programmers as
+the standard Win32 headers also define it (as well as yet another name for the
+same macro which is {\tt \_TEXT()}).
+
+Don't confuse this macro with \helpref{\_()}{underscore}!
+
+\membersection{\_}\label{underscore}
+
\section{Dialog functions}\label{dialogfunctions}
Below are a number of convenience functions for getting input from the
\membersection{::wxMessageBox}\label{wxmessagebox}
-\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK \pipe wxCENTRE},\\
+\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK},\\
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1}}
General purpose message dialog. {\it style} may be a bit list of the
\twocolitem{wxCANCEL}{Puts a Cancel button on the message box. May be combined with
wxYES\_NO or wxOK.}
\twocolitem{wxOK}{Puts an Ok button on the message box. May be combined with wxCANCEL.}
-\twocolitem{wxCENTRE}{Centres the text.}
\twocolitem{wxICON\_EXCLAMATION}{Displays an exclamation mark symbol.}
\twocolitem{wxICON\_HAND}{Displays an error symbol.}
\twocolitem{wxICON\_ERROR}{Displays an error symbol - the same as wxICON\_HAND.}
{\it message} may contain newline characters, in which case the
message will be split into separate lines, to cater for large messages.
-Under Windows, the native MessageBox function is used unless wxCENTRE
-is specified in the style, in which case a generic function is used.
-This is because the native MessageBox function cannot centre text.
-The symbols are not shown when the generic function is used.
-
\wxheading{Include files}
<wx/msgdlg.h>
<wx/tipdlg.h>
+
+\section{Math functions}
+
+\wxheading{Include files}
+
+<wx/math.h>
+
+\membersection{wxFinite}\label{wxfinite}
+
+\func{int}{wxFinite}{\param{double }{x}}
+
+Returns a non-zero value if {\it x} is neither infinite or NaN (not a number),
+returns 0 otherwise.
+
+\membersection{wxIsNaN}\label{wxisnan}
+
+\func{bool}{wxIsNaN}{\param{double }{x}}
+
+Returns a non-zero value if {\it x} is NaN (not a number), returns 0
+otherwise.
+
+
\section{GDI functions}\label{gdifunctions}
The following are relevant to the GDI (Graphics Device Interface).
where {\tt file.ext} is a file that the resource compiler can find.
-One use of this is to store {\tt .wxr} files instead of including the data in the C++ file; some compilers
-cannot cope with the long strings in a {\tt .wxr} file. The resource data can then be parsed
-using \helpref{wxResourceParseString}{wxresourceparsestring}.
-
This function is available under Windows only.
\wxheading{Include files}
\func{}{DECLARE\_APP}{className}
-This is used in headers to create a forward declaration of the wxGetApp function implemented
-by IMPLEMENT\_APP. It creates the declaration {\tt className\& wxGetApp(void)}.
+This is used in headers to create a forward declaration of the
+\helpref{wxGetApp}{wxgetapp} function implemented by
+\helpref{IMPLEMENT\_APP}{implementapp}. It creates the declaration
+{\tt className\& wxGetApp(void)}.
Example:
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxConstCast}{wxconstcast}
-\section{Resource functions}\label{resourcefuncs}
-
-\overview{Resource functions}{resourceformats}
-
-This section details functions for manipulating wxWindows (.WXR) resource
-files and loading user interface elements from resources.
-
-\normalbox{Please note that this use of the word `resource' is different from that used when talking
-about initialisation file resource reading and writing, using such functions
-as wxWriteResource and wxGetResource. It is just an unfortunate clash of terminology.}
-
-\helponly{For an overview of the wxWindows resource mechanism, see \helpref{the wxWindows resource system}{resourceformats}.}
-
-See also \helpref{wxWindow::LoadFromResource}{wxwindowloadfromresource} for
-loading from resource data.
-
-\membersection{::wxResourceAddIdentifier}\label{wxresourceaddidentifier}
-
-\func{bool}{wxResourceAddIdentifier}{\param{const wxString\& }{name}, \param{int }{value}}
-
-Used for associating a name with an integer identifier (equivalent to dynamically\rtfsp
-{\tt\#}defining a name to an integer). Unlikely to be used by an application except
-perhaps for implementing resource functionality for interpreted languages.
-
-\membersection{::wxResourceClear}\label{wxresourceclear}
-
-\func{void}{wxResourceClear}{\void}
-
-Clears the wxWindows resource table.
-
-\membersection{::wxResourceCreateBitmap}\label{wxresourcecreatebitmap}
-
-\func{wxBitmap *}{wxResourceCreateBitmap}{\param{const wxString\& }{resource}}
-
-Creates a new bitmap from a file, static data, or Windows resource, given a valid
-wxWindows bitmap resource identifier. For example, if the .WXR file contains
-the following:
-
-\begin{verbatim}
-static const wxString\& project_resource = "bitmap(name = 'project_resource',\
- bitmap = ['project', wxBITMAP_TYPE_BMP_RESOURCE, 'WINDOWS'],\
- bitmap = ['project.xpm', wxBITMAP_TYPE_XPM, 'X']).";
-\end{verbatim}
-
-then this function can be called as follows:
-
-\begin{verbatim}
- wxBitmap *bitmap = wxResourceCreateBitmap("project_resource");
-\end{verbatim}
-
-\membersection{::wxResourceCreateIcon}\label{wxresourcecreateicon}
-
-\func{wxIcon *}{wxResourceCreateIcon}{\param{const wxString\& }{resource}}
-
-Creates a new icon from a file, static data, or Windows resource, given a valid
-wxWindows icon resource identifier. For example, if the .WXR file contains
-the following:
-
-\begin{verbatim}
-static const wxString\& project_resource = "icon(name = 'project_resource',\
- icon = ['project', wxBITMAP_TYPE_ICO_RESOURCE, 'WINDOWS'],\
- icon = ['project', wxBITMAP_TYPE_XBM_DATA, 'X']).";
-\end{verbatim}
-
-then this function can be called as follows:
-
-\begin{verbatim}
- wxIcon *icon = wxResourceCreateIcon("project_resource");
-\end{verbatim}
-
-\membersection{::wxResourceCreateMenuBar}\label{wxresourcecreatemenubar}
-
-\func{wxMenuBar *}{wxResourceCreateMenuBar}{\param{const wxString\& }{resource}}
-
-Creates a new menu bar given a valid wxWindows menubar resource
-identifier. For example, if the .WXR file contains the following:
-
-\begin{verbatim}
-static const wxString\& menuBar11 = "menu(name = 'menuBar11',\
- menu = \
- [\
- ['&File', 1, '', \
- ['&Open File', 2, 'Open a file'],\
- ['&Save File', 3, 'Save a file'],\
- [],\
- ['E&xit', 4, 'Exit program']\
- ],\
- ['&Help', 5, '', \
- ['&About', 6, 'About this program']\
- ]\
- ]).";
-\end{verbatim}
-
-then this function can be called as follows:
-
-\begin{verbatim}
- wxMenuBar *menuBar = wxResourceCreateMenuBar("menuBar11");
-\end{verbatim}
-
-
-\membersection{::wxResourceGetIdentifier}\label{wxresourcegetidentifier}
-
-\func{int}{wxResourceGetIdentifier}{\param{const wxString\& }{name}}
-
-Used for retrieving the integer value associated with an identifier.
-A zero value indicates that the identifier was not found.
-
-See \helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}.
-
-\membersection{::wxResourceParseData}\label{wxresourcedata}
-
-\func{bool}{wxResourceParseData}{\param{const wxString\& }{resource}, \param{wxResourceTable *}{table = NULL}}
-
-Parses a string containing one or more wxWindows resource objects. If
-the resource objects are global static data that are included into the
-C++ program, then this function must be called for each variable
-containing the resource data, to make it known to wxWindows.
-
-{\it resource} should contain data in the following form:
-
-\begin{verbatim}
-dialog(name = 'dialog1',
- style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
- title = 'Test dialog box',
- x = 312, y = 234, width = 400, height = 300,
- modal = 0,
- control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
- control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
- 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
-\end{verbatim}
-
-This function will typically be used after including a {\tt .wxr} file into
-a C++ program as follows:
-
-\begin{verbatim}
-#include "dialog1.wxr"
-\end{verbatim}
-
-Each of the contained resources will declare a new C++ variable, and each
-of these variables should be passed to wxResourceParseData.
-
-\membersection{::wxResourceParseFile}\label{wxresourceparsefile}
-
-\func{bool}{wxResourceParseFile}{\param{const wxString\& }{filename}, \param{wxResourceTable *}{table = NULL}}
-
-Parses a file containing one or more wxWindows resource objects
-in C++-compatible syntax. Use this function to dynamically load
-wxWindows resource data.
-
-\membersection{::wxResourceParseString}\label{wxresourceparsestring}
-
-\func{bool}{wxResourceParseString}{\param{char *}{s}, \param{wxResourceTable *}{table = NULL}}
-
-Parses a string containing one or more wxWindows resource objects. If
-the resource objects are global static data that are included into the
-C++ program, then this function must be called for each variable
-containing the resource data, to make it known to wxWindows.
-
-{\it resource} should contain data with the following form:
-
-\begin{verbatim}
-dialog(name = 'dialog1',
- style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
- title = 'Test dialog box',
- x = 312, y = 234, width = 400, height = 300,
- modal = 0,
- control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
- control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
- 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
-\end{verbatim}
-
-This function will typically be used after calling \helpref{wxLoadUserResource}{wxloaduserresource} to
-load an entire {\tt .wxr file} into a string.
-
-\membersection{::wxResourceRegisterBitmapData}\label{registerbitmapdata}
-
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char *}{xbm\_data}, \param{int }{width},
-\param{int }{height}, \param{wxResourceTable *}{table = NULL}}
-
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char **}{xpm\_data}}
-
-Makes {\tt\#}included XBM or XPM bitmap data known to the wxWindows resource system.
-This is required if other resources will use the bitmap data, since otherwise there
-is no connection between names used in resources, and the global bitmap data.
-
-\membersection{::wxResourceRegisterIconData}\label{wxresourceregistericondata}
-
-Another name for \helpref{wxResourceRegisterBitmapData}{registerbitmapdata}.
-
\section{Log functions}\label{logfunctions}
These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
<wx/debug.h>
+
+\membersection{::wxIsDebuggerRunning}\label{wxisdebuggerrunning}
+
+\func{bool}{wxIsDebuggerRunning}{\void}
+
+Returns {\tt true} if the program is running under debugger, {\tt false}
+otherwise.
+
+Please note that this function is currently only implemented for Mac builds
+using CodeWarrior and always returns {\tt false} elsewhere.
+
+
\section{Environment access functions}\label{environfunctions}
The functions in this section allow to access (get) or change value of
projects / wxWidgets.git / blobdiff