Reparent() is available under Mac as well (bug 1500782)

[wxWidgets.git] / docs / latex / wx / fs.tex

diff --git a/docs/latex/wx/fs.tex b/docs/latex/wx/fs.tex
index 61422f1947ff25bc22cb63d13fc11b13b221f50e..c8f80148b8402532cdde4f6510a66e800c9fcf33 100644 (file)
--- a/docs/latex/wx/fs.tex
+++ b/docs/latex/wx/fs.tex
@@ -2,36 +2,37 @@
 
 The wxHTML library uses a {\bf virtual file systems} mechanism
 similar to the one used in Midnight Commander, Dos Navigator,
 
 The wxHTML library uses a {\bf virtual file systems} mechanism
 similar to the one used in Midnight Commander, Dos Navigator,

-FAR or almost any modern file manager. (Do you remember? You can
-press enter on ZIP file and its contents is displayed as if it
-were a local directory...)
+FAR or almost any modern file manager. It allows the user to access
+data stored in archives as if they were ordinary files. On-the-fly
+generated files that exist only in memory are also supported.

 
 \wxheading{Classes}
 
 
 \wxheading{Classes}
 

-Three classes are used in order to provide full VFS:
+Three classes are used in order to provide virtual file systems mechanism:

 
 \begin{itemize}\itemsep=0pt
 \item The \helpref{wxFSFile}{wxfsfile} class provides information
 
 \begin{itemize}\itemsep=0pt
 \item The \helpref{wxFSFile}{wxfsfile} class provides information

-on opened file (name, input stream, mime type and anchor).
+about opened file (name, input stream, mime type and anchor).

 \item The \helpref{wxFileSystem}{wxfilesystem} class is the interface.
 Its main methods are ChangePathTo() and OpenFile(). This class
 is most often used by the end user.
 \item The \helpref{wxFileSystemHandler}{wxfilesystemhandler} is the core
 \item The \helpref{wxFileSystem}{wxfilesystem} class is the interface.
 Its main methods are ChangePathTo() and OpenFile(). This class
 is most often used by the end user.
 \item The \helpref{wxFileSystemHandler}{wxfilesystemhandler} is the core

-if VFS mechanism. You can derive your own handler and pass it to
+of virtual file systems mechanism. You can derive your own handler and pass it to
+the VFS mechanism. You can derive your own handler and pass it to

 wxFileSystem's AddHandler() method. In the new handler you only need to
 wxFileSystem's AddHandler() method. In the new handler you only need to

-overwrite OpenFile() and CanOpen() methods.
+override the OpenFile() and CanOpen() methods.

 \end{itemize}
 
 \wxheading{Locations}
 
 \end{itemize}
 
 \wxheading{Locations}
 

-Locations (aka filenames aka addresses) are constructed from 4 parts:
+Locations (aka filenames aka addresses) are constructed from four parts:

 
 \begin{itemize}\itemsep=0pt
 \item {\bf protocol} - handler can recognize if it is able to open a
 file by checking its protocol. Examples are "http", "file" or "ftp".
 \item {\bf right location} - is the name of file within the protocol.
 
 \begin{itemize}\itemsep=0pt
 \item {\bf protocol} - handler can recognize if it is able to open a
 file by checking its protocol. Examples are "http", "file" or "ftp".
 \item {\bf right location} - is the name of file within the protocol.

-In "http://www.wxwindows.org/index.html" the right location is "//www.wxwindows.org/index.html".
-\item {\bf anchor} - anchor is optional and is usually not present.
+In "http://www.wxwidgets.org/index.html" the right location is "//www.wxwidgets.org/index.html".
+\item {\bf anchor} - an anchor is optional and is usually not present.

 In "index.htm\#chapter2" the anchor is "chapter2".
 \item {\bf left location} - this is usually an empty string. 
 It is used by 'local' protocols such as ZIP.
 In "index.htm\#chapter2" the anchor is "chapter2".
 \item {\bf left location} - this is usually an empty string. 
 It is used by 'local' protocols such as ZIP.


@@ -40,43 +41,38 @@ See Combined Protocols paragraph for details.
 
 \wxheading{Combined Protocols}
 
 
 \wxheading{Combined Protocols}
 

-Left location pretends protocol in URL string. 
-It's not used by global protocols like HTTP but it's used
-by local ones - for example you can see this address:
+The left location precedes the protocol in the URL string. 
+It is not used by global protocols like HTTP but it becomes handy when nesting
+protocols - for example you may want to access files in a ZIP archive:

 
 file:archives/cpp\_doc.zip\#zip:reference/fopen.htm\#syntax
 
 
 file:archives/cpp\_doc.zip\#zip:reference/fopen.htm\#syntax
 

-In this example, protocol is "zip", left location is
-"reference/fopen.htm", anchor is "syntax" and right location
-is "file:archives/cpp\_doc.zip". It is used by zip handler
-to determine in what file this particular zip VFS is stored.
+In this example, the protocol is "zip", right location is
+"reference/fopen.htm", anchor is "syntax" and left location
+is "file:archives/cpp\_doc.zip". 

 
 

-In fact there are two protocols used in this example: zip and file.
-You can construct even more complicated addresses like this one:
-
-http://www.archives.org/myarchive.zip\#zip:local/docs/cpp/stdio.zip\#zip:index.htm
-
-In this example you access zip VFS stdio.zip stored in another zip (myarchive.zip)
-which is at WWW.
+There are {\bf two} protocols used in this example: "zip" and "file".

 
 \wxheading{File Systems Included in wxHTML}
 
 
 \wxheading{File Systems Included in wxHTML}
 

-Following VFS handlers are part of wxWindows so far:
+The following virtual file system handlers are part of wxWidgets so far:

 
 \begin{twocollist}
 
 \begin{twocollist}

-\twocolitem{{\bf wxInternetFSHandler}}{Handler for accessing documents
-via HTTP or FTP protocols. Include file is <wx/fs_inet.h>.}
-\twocolitem{{\bf wxZipFSHandler}}{Handler for ZIP archives. 
-Include file is <wx/fs_zip.h>. URL is in form "archive.zip\#zip:filename".}
+\twocolitem{{\bf wxInternetFSHandler}}{A handler for accessing documents
+via HTTP or FTP protocols. Include file is <wx/fs\_inet.h>.}
+\twocolitem{{\bf wxZipFSHandler}}{A handler for ZIP archives. 
+Include file is <wx/fs\_zip.h>. URL is in form "archive.zip\#zip:filename".}

 \twocolitem{{\bf wxMemoryFSHandler}}{This handler allows you to access 
 data stored in memory (such as bitmaps) as if they were regular files.
 See \helpref{wxMemoryFSHandler documentation}{wxmemoryfshandler} for details.
 \twocolitem{{\bf wxMemoryFSHandler}}{This handler allows you to access 
 data stored in memory (such as bitmaps) as if they were regular files.
 See \helpref{wxMemoryFSHandler documentation}{wxmemoryfshandler} for details.

-Include file is <wx/fs_mem.h>. UURL is prefixed with memory:, e.g. 
+Include file is <wx/fs\_mem.h>. URL is prefixed with memory:, e.g. 

 "memory:myfile.htm"}
 \end{twocollist}
 
 "memory:myfile.htm"}
 \end{twocollist}
 

-In addition, wxFileSystem can access local files.
+In addition, wxFileSystem itself can access local files.
+

 
 

+\wxheading{Initializing file system handlers}

 
 Use \helpref{wxFileSystem::AddHandler}{wxfilesystemaddhandler} to initialize
 a handler, for example:
 
 Use \helpref{wxFileSystem::AddHandler}{wxfilesystemaddhandler} to initialize
 a handler, for example:


@@ -90,7 +86,6 @@ bool MyApp::OnInit()
 {
     wxFileSystem::AddHandler(new wxMemoryFSHandler);
 ...
 {
     wxFileSystem::AddHandler(new wxMemoryFSHandler);
 ...

+}

 \end{verbatim}
 
 \end{verbatim}
 

-
-