+
+ !!! When sending bug reports tell us what version of wxWindows you are
+ using (including the beta) and what compiler on what system. One
+ example: wxGTK 2.3.0, egcs 1.1.1, Redhat 6.2 !!!
+
* The most simple case
-----------------------
-If you compile wxWindows on Unix for the first time and don't like
-to read install instructions just do (in the base dir):
+If you compile wxWindows on Linux for the first time and don't like to read
+install instructions just do (in the base dir):
+
+> ./configure --with-gtk
+> make
+> su <type root password>
+> make install
+> ldconfig
+> exit
+
+Afterwards you can continue with
+
+> make
+> su <type root password>
+> make install
+> ldconfig
+> exit
+
+If you want to remove wxWindows on Unix you can do this:
+
+> su <type root password>
+> make uninstall
+> ldconfig
+> exit
+
+* The expert case
+-----------------
+
+If you want to do some more serious cross-platform programming with wxWindows,
+such as for GTK and Motif, you can now build two complete libraries and use
+them concurretly. For this end, you have to create a directory for each build
+of wxWindows - you may also want to create different versions of wxWindows
+and test them concurrently. Most typically, this would be a version configured
+with --enable-debug_flag and one without. Note, that only one build can currently
+be installed, so you'd have to use local version of the library for that purpose.
+For building three versions (one GTK, one Motif and a debug version of the GTK
+source) you'd do this:
+
+md buildmotif
+cd buildmotif
+../configure --with-motif
+make
+cd ..
+
+md buildgtk
+cd buildgtk
+../configure --with-gtk
+make
+cd ..
-./configure --with-gtk --with-shared --without-threads
+md buildgtkd
+cd buildgtkd
+../configure --with-gtk --enable-debug_flag
make
+cd ..
+
+* The most simple errors
+------------------------
+
+For any configure errors: please look at config.log file which was generated
+during configure run, it usually contains some useful information.
+
+configure reports, that you don't have GTK 1.2 installed although you are
+very sure you have. Well, you have installed it, but you also have another
+version of the GTK installed, which you may need to remove including other
+versions of glib (and its headers). Or maybe you installed it in non default
+location and configure can't find it there, so please check that your PATH
+variable includes the path to the correct gtk-config. Also check that your
+LD_LIBRARY_PATH or equivalent variable contains the path to GTK+ libraries if
+they were installed in a non default location.
+
+You get errors from make: please use GNU make instead of the native make
+program. Currently wxWindows can be built only with GNU make, BSD make and
+Solaris make. Other versions might work or not (any which don't have VPATH
+support definitely won't).
+
+You get errors during compilation: The reason is that you probably have a
+broken compiler, which includes a lot of old gcc versions. In particular, if
+you use gcc 2.8 you have to disable optimsation as the compiler will give up
+with an internal compiler error.
-and drink 10 coffees.
+You get immediate segfault when starting any sample or application: This is
+either due to having compiled the library with different flags or options than
+your program - typically you might have the __WXDEBUG__ option set for the
+library but not for your program - or due to using a broken compiler (and its
+optimisation) such as gcc 2.8.
+Linker complains about missing PROIO_yy_flex_alloc and similar symbols: you
+probably have an old version of flex, 2.5.4 is recommended.
+
+* The most simple program
+-------------------------
+
+Now create your super-application myfoo.app and compile anywhere with
+
+gcc myfoo.cpp `wx-config --libs --cflags` -o myfoo
* General
-----------------------
-The Unix variants of wxWindows use GNU configure. If you have problems
-with your make use GNU make instead.
+The Unix variants of wxWindows use GNU configure. If you have problems with your
+make use GNU make instead.
-Read my homepage at
+If you have general problems with installation, read my homepage at
http://wesley.informatik.uni-freiburg.de/~wxxt
-
-for newest information.
+
+for newest information. If you still don't have any success, please send a bug
+report to one of our mailing lists (see my homepage) INCLUDING A DESCRIPTION OF
+YOUR SYSTEM AND YOUR PROBLEM, SUCH AS YOUR VERSION OF GTK, WXGTK, WHAT DISTRIBUTION
+YOU USE AND WHAT ERROR WAS REPORTED. I know this has no effect, but I tried...
* GUI libraries
-----------------------
-wxWindows requires a GUI toolkit to be installed. Does that make
-sense? So far only the GTK is supported, but we hope to provide
-the choice between GTK, Qt, Motif/Lesstif in the not so distant
-future.
+wxWindows/GTK requires the GTK+ library to be installed on your system. It has
+to be a stable version, preferebly version 1.2.10 (at least 1.2.3 is required,
+1.2.7 is strongly recommended).
-You can get the newest version of the GTK from the GTK homepage
-at
- http://www.gtk.org
-
-The newest versin of Qt can be downloaded for free from the Trolltec's
-site at
- http://www.troll.no
+You can get the newest version of the GTK+ from the GTK homepage at:
-Lesstif can be downloaded from their site
-at
- http://www.lesstif.org
+ http://www.gtk.org
-If you want to develop using Motif, you need to buy it, unless it comes
-with your operating system such as all commercial Unices, as well as
-RedHat's, SuSe's and probably other's Linux Motif editions.
+We also mirror GTK+ at my ftp site. You'll find information about downloading
+at my homepage.
* Additional libraries
-----------------------
-There will be a few more features of wxWindows, which will
-require further libraries (on some platforms). These
-features will be optional. I hope to teach configure
-to check that out automatically.
-
-Thread support:
-
- Requires pthreads under Linux with glibc 2. pthreads are
- always present on such systems, so just compile, unless
- you have RedHat 5.0, which has a broken combination of
- glibc 2 and X. In this case, you have to run configure
- with "--without-threads".
-
- Requires PCthreads under Linux with libc 5. If you
- haven't installed pcthreads, there will be no thread
- support in wxWindows, but the library will compile.
-
- Requires Posix threads on commercial Unix system,
- which are always present. Just compile.
-
- On SGI Irix we first look for sprocs, then pthreads and
- use the last one found.
-
-Python scripting language support:
-
- Requires Python. Soon to come.
-
-* Other things to do
------------------------------
+wxWindows/Gtk requires a thread library and X libraries known to work with threads.
+This is the case on all commercial Unix-Variants and all Linux-Versions that are
+based on glibc 2 except RedHat 5.0 which is broken in many aspects. As of writing
+this, these Linux distributions have correct glibc 2 support:
-wxGTK and wxMotif/wxLesstif require the built-in
-ImLib/GdkImlib to be configured. For that purpose
-copy the two files from /misc/imlib to your
-home directory and rename "imrc" -> ".imrc".
-You may also edit imrc by hand as you like.
-The palette file is required when using
-wxWindows in 256-colour mode.
+ - RedHat 5.1
+ - Debian 2.0
+ - Stampede
+ - DLD 6.0
+ - SuSE 6.0
-If you want to use wxWindows's ODBC support, you'll have
-to create a .odbc.ini file. The readme file in
-~/src/iodbc tells you what to do.
+You can disable thread support by running
+./configure --disable-threads
+make
+su <type root password>
+make install
+ldconfig
+exit
-* Create your configuration
------------------------------
+NB: DO NOT COMPILE WXGTK WITH GCC 2.7 AND THREADS, SINCE ALL PROGRAMS WILL CRASH UPON
+START-UP! Just always use egcs and be happy.
-Usage:
- ./configure options
+* Building wxGTK on OS/2
+--------------------------
-If you want to use system's C and C++ compiler,
-set environment variables CC and CCC as
+Please send comments and question about the OS/2 installation
+to Andrea Venturoli <a.ventu@flashnet.it> and patches to
+the wxWindows mailing list.
+
+You'll need OS/2 Warp (4.00FP#6), X-Free86/2 (3.3.3 or newer),
+GTK+ (1.2.5 or newer), emx (0.9d fix 1), flex (2.5.4), yacc (1.8),
+korn shell (5.2.13), Autoconf (2.13), GNU file utilities (3.6),
+GNU text utilities (1.3), GNU shell utilites (1.12), m4 (1.4),
+sed (2.05), grep (2.0), Awk (3.0.3), GNU Make (3.76.1).
+
+Open an OS/2 prompt and switch to the directory above.
+First set some global environment variables we need:
+
+SET CXXFLAGS=-Zmtd -D__ST_MT_ERRNO__
+SET CFLAGS=-Zmtd -D__ST_MT_ERRNO__
+SET OSTYPE=OS2X
+SET COMSPEC=sh
+
+Notice you can choose whatever you want, if you don't like OS2X.
+
+Now, run autoconf in the main directory and in the samples, demos
+and utils subdirectory. This will generate the OS/2 specific
+versions of the configure scripts. Now run
+ configure --with-gtk
+as described above.
+
+If you have pthreads library installed, but have a gtk version
+which does not yet support threading, you need to explicitly
+diable threading by using the option --disable-threads.
- % setenv CC cc
- % setenv CCC CC
- % ./configure options
+Note that configure assumes your flex will generate files named
+"lexyy.c", not "lex.yy.c". If you have a version which does
+generate "lex.yy.c", you need to manually change the generated
+makefile.
+
+* Building wxGTK on SGI
+--------------------------
Using the SGI native compilers, it is recommended that you
-also set CFLAGS and CXXFLAGS before running configure. These
+also set CFLAGS and CXXFLAGS before running configure. These
should be set to :
-CFLAGS="-mips3 -n32"
+CFLAGS="-mips3 -n32"
CXXFLAGS="-mips3 -n32"
-This is essential if you want to use the resultant binaries
-on any other machine than the one it was compiled on. If you
-have a 64bit machine (Octane) you should also do this to ensure
-you don't accidently build the libraries as 64bit (which is
+This is essential if you want to use the resultant binaries
+on any other machine than the one it was compiled on. If you
+have a 64bit machine (Octane) you should also do this to ensure
+you don't accidently build the libraries as 64bit (which is
untested).
The SGI native compiler support has only been tested on Irix 6.5.
-to see all the options please use:
+* Create your configuration
+-----------------------------
+
+Usage:
+ ./configure options
+
+If you want to use system's C and C++ compiler,
+set environment variables CC and CCC as
+
+ % setenv CC cc
+ % setenv CCC CC
+ % ./configure options
- ./configure --help
+to see all the options please use:
-The basic philosophy is that if you want to use different
-configurations, like a debug and a release version,
-or use the same source tree on different systems,
-you have only to change the environment variable OSTYPE.
-(Sadly this variable is not set by default on some systems
-in some shells - on SGI's for example). So you will have to
-set it there. This variable HAS to be set before starting
-configure, so that it knows which system it tries to
-configure for.
+ ./configure --help
-Configure will complain if the system variable OSTYPE has
-not been defined. And Make in some circumstances as well...
+It is recommended to build wxWindows in another directory (maybe a
+subdirectory of your wxWindows installation) as this allows you to
+have multiple configurations (for example, debug and release or GTK
+and Motif) simultaneously.
* General options
-------------------
-Obviously, you have to choose a toolkit. You must do this by
-running configure with either of
+Given below are the commands to change the default behaviour,
+i.e. if it says "--disable-threads" it means that threads
+are enabled by default.
+
+Normally, you won't have to choose a toolkit, because when
+you download wxGTK, it will default to --with-gtk etc. But
+if you use all of our CVS repository you have to choose a
+toolkit. You must do this by running configure with either of:
+
+ --with-gtk Use the GIMP ToolKit (GTK). Default.
- --with-gtk Use the GIMP ToolKit (GTK)
-
- --with-qt Use Qt from TrollTec
-
- --with-motif Use either Motif or Lesstif
- Configure will look for both.
+ --with-motif Use either Motif or Lesstif
+ Configure will look for both.
The following options handle the kind of library you want to build.
- --without-threads Compile without thread support.
+ --disable-threads Compile without thread support.
+
+ --disable-shared Do not create shared libraries, but
+ build static libraries instead.
+
+ --disable-optimise Do not optimise the code. Can
+ sometimes be useful for debugging
+ and is required on some architectures
+ such as Sun with gcc 2.8.X which
+ would otherwise produce segvs.
+
+ --enable-profile Add profiling info to the object
+ files. Currently broken, I think.
+
+ --enable-no_rtti Enable compilation without creation of
+ C++ RTTI information in object files.
+ This will speed-up compilation and reduce
+ binary size.
+
+ --enable-no_exceptions Enable compilation without creation of
+ C++ exception information in object files.
+ This will speed-up compilation and reduce
+ binary size. Also fewer crashes during the
+ actual compilation...
- --with-shared Create shared libraries.
+ --enable-no_deps Enable compilation without creation of
+ dependency information.
- --without-optimise Do not optimise the code.
+ --enable-permissive Enable compilation without creation of
+ giving erros as soon as you compile with
+ Solaris' ANSI-defying headers.
- --with-profile Add profiling info to the object
- files. Currently broken, I think.
-
- --with-mem_tracing Add built-in memory tracing.
- This doesn't work well with gcc.
-
- --with-dmalloc Use the dmalloc memory debugger.
- Read more at www.letters.com/dmalloc/
-
- --with-debug_info Add debug info to object files and
- executables.
+ --enable-mem_tracing Add built-in memory tracing.
- --with-debug_flag Define __DEBUG__ and __WXDEBUG__ when
- compiling.
+ --enable-dmalloc Use the dmalloc memory debugger.
+ Read more at www.letters.com/dmalloc/
+
+ --enable-debug_info Add debug info to object files and
+ executables for use with debuggers
+ such as gdb (or its many frontends).
+
+ --enable-debug_flag Define __DEBUG__ and __WXDEBUG__ when
+ compiling. This enable wxWindows' very
+ useful internal debugging tricks (such
+ as automatically reporting illegal calls)
+ to work. Note that program and library
+ must be compiled with the same debug
+ options.
* Feature Options
-------------------
-When using the Windows version of wxWindows, it is possible
-to edit the file /include/wx/msw/setup.h in order to enable
-or disable some features of wxWindows so that the resulting
-binaries get smaller.
+When producing an executable that is linked statically with wxGTK
+you'll be surprised at its immense size. This can sometimes be
+drastically reduced by removing features from wxWindows that
+are not used in your program. The most relevant such features
+are
-As I don't yet care for binary size and target mainly at
-producing a shared library, wxWindows's configure system auto-
-matically enables all features, as long as they are already
-implemented.
+ --with-odbc Enables ODBC code. This is disabled
+ by default because iODBC is under the
+ L-GPL license which is less liberal than
+ wxWindows license.
-* Compiling
--------------
+ --without-libpng Disables PNG image format code.
-The following must be done in the base directory (e.g. ~/wxGTK
-or ~/wxWin)
+ --without-libjpeg Disables JPEG image format code.
-First you have to create all makefiles in all subdirectories:
+ --without-libtiff Disables TIFF image format code.
- make Makefiles
+ --disable-pnm Disables PNM image format code.
-Dependencies are generated automatically using
+ --disable-gif Disables GIF image format code.
- make depend
-
-(For some reason, this doesn't seem to work completely.)
+ --disable-pcx Disables PCX image format code.
-Now the makefiles are created you can compile everything is as simple
-as typing:
+ --disable-iff Disables IFF image format code.
- make
+ --disable-resources Disables the use of *.wxr type resources.
-make yourself some coffee, as it will try to compile
-ALL the files in this distribution.
+ --disable-threads Disables threads. Will also disable sockets.
-if you want to be more selective:
+ --disable-sockets Disables sockets.
- make src will build only the base libraries
- make utils will build the utils
- make samples will build the samples
- make other will build the other samples
- make user will build the files in the directory other
+ --disable-dnd Disables Drag'n'Drop.
-Depending on the configuration of some files, the libraries
-and binaries will be placed in different directories.
-The "global" binaries and libraries will be placed in:
+ --disable-clipboard Disables Clipboard.
- bin/$(OSTYPE) and
- lib/$(OSTYPE) respectively
+ --disable-serial Disables object instance serialiasation.
-"local" binaries and libraries will be placed in:
+ --disable-streams Disables the wxStream classes.
- (basedir of that application)/$(OSTYPE).
+ --disable-file Disables the wxFile class.
-This is also the place where all the object-files will go.
+ --disable-textfile Disables the wxTextFile class.
-If you want to conserve disk space by removing unnecessary
+ --disable-intl Disables the internationalisation.
+
+ --disable-validators Disables validators.
+
+ --disable-accel Disables accelerators support.
+
+Apart from disabling certain features you can very often "strip"
+the program of its debugging information resulting in a significant
+reduction in size.
+
+* Compiling
+-------------
+
+The following must be done in the base directory (e.g. ~/wxGTK
+or ~/wxWin or whatever)
+
+Now the makefiles are created (by configure) and you can compile
+the library by typing:
+
+ make
+
+make yourself some coffee, as it will take some time. On an old
+386SX possibly two weeks. During compilation, you'll get a few
+warning messages depending in your compiler.
+
+If you want to be more selective, you can change into a specific
+directiry and type "make" there.
+
+Then you may install the library and it's header files under
+/usr/local/include/wx and /usr/local/lib respectively. You
+have to log in as root (i.e. run "su" and enter the root
+password) and type
+
+ make install
+
+You can remove any traces of wxWindows by typing
+
+ make uninstall
+
+If you want to save disk space by removing unnecessary
object-files:
- make clean_obj
+make clean
-will do the work for you.
+in the various directories will do the work for you.
* Creating a new Project
--------------------------
-I propose to put all contributed programs in the directory
-"~/wxWin/user", with a directory of its own.
+1) The first way uses the installed libraries and header files
+automatically using wx-config
+
+gcc myfoo.cpp `wx-config --cflags --libs` -o myfoo
+
+Using this way, a make file for the minimal sample would look
+like this
+
+CC = gcc
-This directory then should include the following files:
+minimal: minimal.o
+ $(CC) -o minimal minimal.o `wx-config --libs`
-Makefile (You can copy this one from any application in samples
- probably you will not need to edit this one. There is
- only one case where you might be interested in changing
- this file, but about that see later.)
-Makefile.in (This is the base application-Makefile template, from
- which the actual Makefile for each system is created.
- More about this later)
+minimal.o: minimal.cpp mondrian.xpm
+ $(CC) `wx-config --cflags` -c minimal.cpp -o minimal.o
-put ALL your source code along with all the other stuff you need for
-your application in this directory (subdirectories are welcome).
-
-** Something about Makefiles
-------------------------------
-
-On general principle it should only contain ONE line, which is as follows:
-
- include ../../setup/general/makeapp
-
-this will include all the necessary definitions for creating the applications
-
-the only case where you might want to add another line is the following:
-this version of configure also supports creation of source archives of the
-application for easy distribution and updates to newer version of wxWindows.
- For this purpose all files in the application-directory will be put into
-a gziped tar-file in the full notation user/<your application>/*
-if you want to include some other files that you want "more visible", like
-a README.<yourApp> or a shell script for easy
-compilation/installation/distribution, then you have to add a variable
-
- DISTRIBUTE_ADDITIONAL=<your files>
-
-to the Makefile.
-So it would look like this:
-
- DISTRIBUTE_ADDITIONAL=README.TheApp
- include ../../setup/general/makeapp
-
-As we have already talked about distribution the command to create a
-distribution is:
-
- make distrib
-
-NOTE: If you are in the base directory of wxWindows it will create
-distribution packages for wxWindows as well as for all packages in the
-user directory.
- So if you want to create only packages for the files in user,
-then go to the directory other and type:
-
- make distrib
-
-or if you only want one application to be created then
-enter the specific directory and type there:
-make distrib
-
-All the distribution files will be put in the directory
-distrib at the base of the wxWindows-tree (where also configure
-and template.mak can be found).
-
-** Something about Makefile.in
---------------------------------
-
-As you have already seen with Makefile, configure makes a lot of use
-if the include statement in make to keep the Makefiles as simple as
-possible.
-
-So basically there are only variables to define and then a include command.
-Exception to this rule is if you have special rules for some stuff...
-These rules should go AFTER the include statement!!!
-
-so the general header looks like this:
-
- # wxWindows base directory
- WXBASEDIR=@WXBASEDIR@
- # set the OS type for compilation
- OS=@OS@
- # compile a library only
- RULE=bin
-
-and the general footer will look like this:
-
- # include the definitions now
- include ../../../template.mak
-
-the key variable is RULE, which defines what make should create
-in this directory.
-
-here are some examples:
-
- RULE description
- ===========================================================================
- bin creates a local binary (for a global binary prefix bin with g)
- additional variables needed:
- BIN_TARGET this gives the name of your application
- BIN_OBJ this gives the object files needed to
- link the application
- optional variables are:
- BIN_SRC this gives the list of c/c++ files for
- which dependencies will be checked.
- (This can be achieved with: make depend)
- BIN_LINK this gives commands for additional
- libraries needed to link the application
- ---------------------------------------------------------------------------
- bin2 creates two local binaries (for global binaries prefix bin2 with g)
- in addition to the variables specified above you MUST also
- provide the same variables with BIN2_ instead of BIN_
- ---------------------------------------------------------------------------
- lib creates a local library (for a global binary prefix bin with g)
- additional variables needed:
- LIB_TARGET this gives the name of your library
- LIB_OBJ this gives the object files needed for
- the library to be build.
- optional variables are:
- LIB_SRC this gives the list of c/c++ files for
- which dependencies will be checked.
- libbin and libgbin are also possible and will need in addition
- the variables from bin
- ---------------------------------------------------------------------------
- gslib is similar to lib, but it creates a shared library if the system
- supports it.
- additional variables needed:
- LIB_MAJOR major number of the shared library
- LIB_MINOR minor number of the shared library
- ---------------------------------------------------------------------------
- other additional variables:
-
- ADD_COMPILE define additional includes/defines that
- are needed to compile the object files
- (if you need to reference some directory
- utils - like wxGrid -, then please
- reference them with the variables defined
- in template.mak - e.g.: $(SRCDIR),$(UTILS),
- $(SAMPLES),$(OTHERS))
-
- NEEDED_DEFINES lists all the defines that HAVE to be set in
- /include/wx/setup.h to compile correctly.
-
- SRC_DIR lists all directories that are needed to
- compile. (i.e: lists all the directories,
- where there are source-files.) But it is
- also needed to clean an object and for
- machines, for which make does not support
- VPATH
-
-currently there are the following compiling rules provided:
-object files are created for the following file extensions:
-.c .cc .cpp
-
-Please have a closer look at the Makefiles in this distribution.
-
-* Platforms configure is working with
----------------------------------------
-
-Please report build succes on any machine. Especially non-
-Linux operating systems (which I don't have).
-
-Original author of the autoconf system for wxxt-1.66 and for this INSTALL
-file:
-
- Martin Sperl sperl@dsn.ast.univie.ac.at
-
-Ported to wxGTK 0.1:
-
- Wolfram Gloger wmglo@dent.med.uni-muenchen.de
-
-Thanks alot to both of them.
+clean:
+ rm -f *.o minimal
+
+This is certain to become the standard way unless we decide
+to sitch to tmake.
+
+2) The other way creates a project within the source code
+directories of wxWindows. For this endeavour, you'll need
+GNU autoconf version 2.14 and add an entry to your Makefile.in
+to the bottom of the configure.in script and run autoconf
+and configure before you can type make.
+
+----------------------
In the hope that it will be useful,
- Robert Roebling roebling@sun2.ruf.uni-freiburg.de
-
-
+ Robert Roebling
+
projects / wxWidgets.git / blobdiff