// Licence: wxWindows license
/////////////////////////////////////////////////////////////////////////////
+
/**
- @class wxCountingOutputStream
+ These enumeration values are returned by various functions in the context
+ of wxStream classes.
+*/
+enum wxStreamError
+{
+ wxSTREAM_NO_ERROR = 0, //!< No error occurred.
+ wxSTREAM_EOF, //!< EOF reached in Read() or similar.
+ wxSTREAM_WRITE_ERROR, //!< generic write error on the last write call.
+ wxSTREAM_READ_ERROR //!< generic read error on the last read call.
+};
- wxCountingOutputStream is a specialized output stream which does not write any
- data anywhere, instead it counts how many bytes would get written if this were a
- normal stream. This can sometimes be useful or required if some data gets
- serialized to a stream or compressed by using stream compression and thus the
- final size of the stream cannot be known other than pretending to write the stream.
- One case where the resulting size would have to be known is if the data has
- to be written to a piece of memory and the memory has to be allocated before
- writing to it (which is probably always the case when writing to a memory stream).
+/**
+ @class wxStreamBase
+
+ This class is the base class of most stream related classes in wxWidgets.
+ It must not be used directly.
@library{wxbase}
@category{streams}
+
+ @see wxStreamBuffer
*/
-class wxCountingOutputStream : public wxOutputStream
+class wxStreamBase
{
public:
/**
- Creates a wxCountingOutputStream object.
+ Creates a dummy stream object. It doesn't do anything.
*/
- wxCountingOutputStream();
+ wxStreamBase();
/**
Destructor.
*/
- ~wxCountingOutputStream();
+ virtual ~wxStreamBase();
/**
- Returns the current size of the stream.
+ This function returns the last error.
*/
- size_t GetSize() const;
-};
+ wxStreamError GetLastError() const;
+ /**
+ Returns the length of the stream in bytes. If the length cannot be
+ determined (this is always the case for socket streams for example),
+ returns ::wxInvalidOffset.
+ @since 2.5.4
+ */
+ virtual wxFileOffset GetLength() const;
-/**
- @class wxBufferedInputStream
+ /**
+ This function returns the size of the stream.
+ For example, for a file it is the size of the file.
- This stream acts as a cache. It caches the bytes read from the specified
- input stream (see wxFilterInputStream).
- It uses wxStreamBuffer and sets the default in-buffer size to 1024 bytes.
- This class may not be used without some other stream to read the data
- from (such as a file stream or a memory stream).
+ @warning
+ There are streams which do not have size by definition, such as socket
+ streams. In that cases, GetSize() returns 0 so you should always test its
+ return value.
+ */
+ virtual size_t GetSize() const;
- @library{wxbase}
- @category{streams}
+ /**
+ Returns @true if no error occurred on the stream.
+
+ @see GetLastError()
+ */
+ virtual bool IsOk() const;
- @see wxStreamBuffer, wxInputStream, wxBufferedOutputStream
-*/
-class wxBufferedInputStream : public wxFilterInputStream
-{
-public:
/**
- Constructor.
- If a non @NULL buffer is given to the stream, it will be deleted by it.
+ Returns @true if the streams supports seeking to arbitrary offsets.
*/
- wxBufferedInputStream(wxInputStream& stream,
- wxStreamBuffer *buffer = NULL);
+ virtual bool IsSeekable() const;
/**
- Destructor.
+ Returns the opposite of IsOk().
+ You can use this function to test the validity of the stream as if
+ it was a pointer:
+
+ @code
+ bool DoSomething(wxInputStream& stream)
+ {
+ wxInt32 data;
+ if (!stream.Read(&data, 4))
+ return false;
+ ...
+ }
+ @endcode
*/
- virtual ~wxBufferedInputStream();
-};
+ bool operator!() const;
+
+protected:
+ /**
+ Internal function.
+ It is called when the stream needs to change the current position.
+ @param pos
+ Offset to seek to.
+ @param mode
+ One of the ::wxSeekMode enumeration values.
+
+ @return The new stream position or ::wxInvalidOffset on error.
+ */
+ virtual wxFileOffset OnSysSeek(wxFileOffset pos, wxSeekMode mode);
+
+ /**
+ Internal function.
+ It is called when the stream needs to know the real position.
+
+ @return The current stream position.
+ */
+ virtual wxFileOffset OnSysTell() const;
+};
/**
@class wxStreamBuffer
- @todo WRITE A DESCRIPTION
+ wxStreamBuffer is a cache manager for wxStreamBase: it manages a stream buffer
+ linked to a stream.
+
+ Each stream always has one autoinitialized stream buffer, but you may
+ attach more of them to the same stream.
@library{wxbase}
@category{streams}
- @see wxStreamBase
+ @see wxStreamBase, @ref overview_stream
*/
class wxStreamBuffer
{
@code
streambuffer.Read(...);
- streambuffer2.Read(...); // This call erases previous error messages set by 'streambuffer'
+ streambuffer2.Read(...);
+ // This call erases previous error messages set by 'streambuffer'
+ // assuming that both instances are stream buffers for the same stream
@endcode
@see SetBufferIO()
*/
wxStreamBuffer(wxStreamBase& stream, BufMode mode);
+ /**
+ Constructor for an input buffer of the specified size.
+
+ Using it is equivalent to using the constructor above with read mode
+ and calling SetBufferIO() but is more convenient.
+
+ @since 2.9.0
+
+ @param bufsize
+ The size of buffer in bytes.
+ @param stream
+ The associated input stream, the buffer will be used in read mode.
+ */
+ wxStreamBuffer(size_t bufsize, wxInputStream& stream);
+
+ /**
+ Constructor for an output buffer of the specified size.
+
+ Using it is equivalent to using the constructor above with write mode
+ and calling SetBufferIO() but is more convenient.
+
+ @since 2.9.0
+
+ @param bufsize
+ The size of buffer in bytes.
+ @param stream
+ The associated output stream, the buffer will be used in write mode.
+ */
+ wxStreamBuffer(size_t bufsize, wxOutputStream& stream);
+
/**
Constructor; creates a new empty stream buffer which won't flush any data
to a stream. mode specifies the type of the buffer (read, write, read_write).
+
This stream buffer has the advantage to be stream independent and to work
only on memory buffers but it is still compatible with the rest of the
wxStream classes. You can write, read to this special stream and it will
wxStreamBuffer(BufMode mode);
/**
- Constructor. It initializes the stream buffer with the data of the specified
+ Copy constructor.
+
+ This method initializes the stream buffer with the data of the specified
stream buffer. The new stream buffer has the same attributes, size, position
and they share the same buffer. This will cause problems if the stream to
which the stream buffer belong is destroyed and the newly cloned stream
@see Read()
*/
- char GetChar();
+ virtual char GetChar();
/**
Returns the amount of available data in the buffer.
/**
Returns the current position (counted in bytes) in the stream buffer.
*/
- off_t GetIntPosition() const;
+ size_t GetIntPosition() const;
/**
Returns the amount of bytes read during the last IO call to the parent stream.
@see Read()
*/
- void PutChar(char c);
+ virtual void PutChar(char c);
/**
Reads a block of the specified size and stores the data in buffer.
different of the specified size, an error has occurred and
should be tested using GetLastError().
*/
- size_t Read(void* buffer, size_t size);
+ virtual size_t Read(void* buffer, size_t size);
/**
Copies data to @a buffer.
@see Write()
*/
- Return value size_t Read(wxStreamBuffer* buffer);
+ size_t Read(wxStreamBuffer* buffer);
/**
Resets to the initial state variables concerning the buffer.
@return Upon successful completion, it returns the new offset as
measured in bytes from the beginning of the stream.
- Otherwise, it returns wxInvalidOffset.
+ Otherwise, it returns ::wxInvalidOffset.
*/
- off_t Seek(off_t pos, wxSeekMode mode);
+ virtual wxFileOffset Seek(wxFileOffset pos, wxSeekMode mode);
/**
Specifies which pointers to use for stream buffering.
@see wxStreamBuffer(), Fixed(), Flushable()
*/
- void SetBufferIO(char* buffer_start, char* buffer_end);
+ void SetBufferIO(void* start, void* end, bool takeOwnership = false);
/**
Destroys or invalidates the previous IO buffer and allocates a new one of the
/**
Returns the parent stream of the stream buffer.
+ @deprecated use GetStream() instead
*/
wxStreamBase* Stream();
the stream.
@return Returns the current position in the stream if possible,
- wxInvalidOffset in the other case.
+ ::wxInvalidOffset in the other case.
*/
- off_t Tell() const;
+ virtual wxFileOffset Tell() const;
/**
Truncates the buffer to the current position.
Writes a block of the specified size using data of buffer.
The data are cached in a buffer before being sent in one block to the stream.
*/
- size_t Write(const void* buffer, size_t size);
+ virtual size_t Write(const void* buffer, size_t size);
/**
See Read().
@class wxOutputStream
wxOutputStream is an abstract base class which may not be used directly.
+ It is the base class of all streams which provide a Write() function,
+ i.e. which can be used to output data (e.g. to a file, to a socket, etc).
+
+ If you want to create your own output stream, you'll need to derive from this
+ class and implement the protected OnSysWrite() function only.
@library{wxbase}
@category{streams}
/**
Destructor.
*/
- ~wxOutputStream();
+ virtual ~wxOutputStream();
/**
Closes the stream, returning @false if an error occurs.
as a file, then the underlying resource is closed too if it is owned
by this stream, or left open otherwise.
*/
- bool Close();
+ virtual bool Close();
/**
Returns the number of bytes written during the last Write().
It may return 0 even if there is no error on the stream if it is
only temporarily impossible to write to it.
*/
- size_t LastWrite() const;
+ virtual size_t LastWrite() const;
/**
Puts the specified character in the output queue and increments the
@param mode
One of wxFromStart, wxFromEnd, wxFromCurrent.
- @return The new stream position or wxInvalidOffset on error.
+ @return The new stream position or ::wxInvalidOffset on error.
*/
- off_t SeekO(off_t pos, wxSeekMode mode = wxFromStart);
+ virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart);
/**
Returns the current stream position.
*/
- off_t TellO() const;
+ virtual wxFileOffset TellO() const;
/**
Writes up to the specified amount of bytes using the data of buffer.
This function returns a reference on the current object, so the user can
test any states of the stream right away.
*/
- wxOutputStream Write(const void* buffer, size_t size);
+ virtual wxOutputStream& Write(const void* buffer, size_t size);
/**
Reads data from the specified input stream and stores them
in the current stream. The data is read until an error is raised
by one of the two streams.
*/
- wxOutputStream Write(wxInputStream& stream_in);
+ wxOutputStream& Write(wxInputStream& stream_in);
+
+protected:
+ /**
+ Internal function. It is called when the stream wants to write data of the
+ specified size @a bufsize into the given @a buffer.
+
+ It should return the size that was actually wrote (which maybe zero if
+ @a bufsize is zero or if an error occurred; in this last case the internal
+ variable @c m_lasterror should be appropriately set).
+ */
+ size_t OnSysWrite(const void* buffer, size_t bufsize);
+};
+
+
+/**
+ @class wxInputStream
+
+ wxInputStream is an abstract base class which may not be used directly.
+ It is the base class of all streams which provide a Read() function,
+ i.e. which can be used to read data from a source (e.g. a file, a socket, etc).
+
+ If you want to create your own input stream, you'll need to derive from this
+ class and implement the protected OnSysRead() function only.
+
+ @library{wxbase}
+ @category{streams}
+*/
+class wxInputStream : public wxStreamBase
+{
+public:
+ /**
+ Creates a dummy input stream.
+ */
+ wxInputStream();
+
+ /**
+ Destructor.
+ */
+ virtual ~wxInputStream();
+
+ /**
+ Returns @true if some data is available in the stream right now, so that
+ calling Read() wouldn't block.
+ */
+ virtual bool CanRead() const;
+
+ /**
+ Returns @true after an attempt has been made to read past the end of the
+ stream.
+ */
+ virtual bool Eof() const;
+
+ /**
+ Returns the first character in the input queue and removes it,
+ blocking until it appears if necessary.
+
+ On success returns a value between 0 - 255; on end of file returns @c wxEOF.
+ */
+ int GetC();
+
+ /**
+ Returns the last number of bytes read.
+ */
+ virtual size_t LastRead() const;
+
+ /**
+ Returns the first character in the input queue without removing it.
+ */
+ virtual char Peek();
+
+ /**
+ Reads the specified amount of bytes and stores the data in buffer.
+ To check if the call was successfull you must use LastRead() to check
+ if this call did actually read @a size bytes (if it didn't, GetLastError()
+ should return a meaningful value).
+
+ @warning
+ The buffer absolutely needs to have at least the specified size.
+
+ @return This function returns a reference on the current object, so the
+ user can test any states of the stream right away.
+ */
+ virtual wxInputStream& Read(void* buffer, size_t size);
+
+ /**
+ Reads data from the input queue and stores it in the specified output stream.
+ The data is read until an error is raised by one of the two streams.
+
+ @return This function returns a reference on the current object, so the
+ user can test any states of the stream right away.
+ */
+ wxInputStream& Read(wxOutputStream& stream_out);
+
+ /**
+ Changes the stream current position.
+
+ @param pos
+ Offset to seek to.
+ @param mode
+ One of wxFromStart, wxFromEnd, wxFromCurrent.
+
+ @return The new stream position or ::wxInvalidOffset on error.
+ */
+ virtual wxFileOffset SeekI(wxFileOffset pos, wxSeekMode mode = wxFromStart);
+
+ /**
+ Returns the current stream position.
+ */
+ virtual wxFileOffset TellI() const;
+
+ /**
+ This function is only useful in read mode.
+ It is the manager of the "Write-Back" buffer. This buffer acts like a
+ temporary buffer where data which has to be read during the next read IO
+ call are put. This is useful when you get a big block of data which you
+ didn't want to read: you can replace them at the top of the input queue
+ by this way.
+
+ Be very careful about this call in connection with calling SeekI() on
+ the same stream. Any call to SeekI() will invalidate any previous call
+ to this method (otherwise you could SeekI() to one position, "unread" a
+ few bytes there, SeekI() to another position and data would be either
+ lost or corrupted).
+
+ @return Returns the amount of bytes saved in the Write-Back buffer.
+ */
+ size_t Ungetch(const void* buffer, size_t size);
+
+ /**
+ This function acts like the previous one except that it takes only one
+ character: it is sometimes shorter to use than the generic function.
+ */
+ bool Ungetch(char c);
+
+protected:
+
+ /**
+ Internal function. It is called when the stream wants to read data of the
+ specified size @a bufsize and wants it to be placed inside @a buffer.
+
+ It should return the size that was actually read or zero if EOF has been
+ reached or an error occurred (in this last case the internal @c m_lasterror
+ variable should be set accordingly as well).
+ */
+ size_t OnSysRead(void* buffer, size_t bufsize);
+};
+
+
+
+
+/**
+ @class wxCountingOutputStream
+
+ wxCountingOutputStream is a specialized output stream which does not write any
+ data anywhere, instead it counts how many bytes would get written if this were a
+ normal stream. This can sometimes be useful or required if some data gets
+ serialized to a stream or compressed by using stream compression and thus the
+ final size of the stream cannot be known other than pretending to write the stream.
+ One case where the resulting size would have to be known is if the data has
+ to be written to a piece of memory and the memory has to be allocated before
+ writing to it (which is probably always the case when writing to a memory stream).
+
+ @library{wxbase}
+ @category{streams}
+*/
+class wxCountingOutputStream : public wxOutputStream
+{
+public:
+ /**
+ Creates a wxCountingOutputStream object.
+ */
+ wxCountingOutputStream();
+
+ /**
+ Destructor.
+ */
+ virtual ~wxCountingOutputStream();
+
+ /**
+ Returns the current size of the stream.
+ */
+ size_t GetSize() const;
+};
+
+
+/**
+ @class wxBufferedInputStream
+
+ This stream acts as a cache. It caches the bytes read from the specified
+ input stream (see wxFilterInputStream).
+ It uses wxStreamBuffer and sets the default in-buffer size to 1024 bytes.
+ This class may not be used without some other stream to read the data
+ from (such as a file stream or a memory stream).
+
+ @library{wxbase}
+ @category{streams}
+
+ @see wxStreamBuffer, wxInputStream, wxBufferedOutputStream
+*/
+class wxBufferedInputStream : public wxFilterInputStream
+{
+public:
+ /**
+ Constructor using the provided buffer or default.
+
+ @param stream
+ The associated low-level stream.
+ @param buffer
+ The buffer to use if non-@NULL. Notice that the ownership of this
+ buffer is taken by the stream, i.e. it will delete it. If this
+ parameter is @NULL a default 1KB buffer is used.
+ */
+ wxBufferedInputStream(wxInputStream& stream,
+ wxStreamBuffer *buffer = NULL);
+
+ /**
+ Constructor allowing to specify the size of the buffer.
+
+ This is just a more convenient alternative to creating a wxStreamBuffer
+ of the given size and using the other overloaded constructor of this
+ class.
+
+ @param stream
+ The associated low-level stream.
+ @param bufsize
+ The size of the buffer, in bytes.
+
+ @since 2.9.0
+ */
+ wxBufferedInputStream(wxInputStream& stream, size_t bufsize);
+
+ /**
+ Destructor.
+ */
+ virtual ~wxBufferedInputStream();
};
+
+
/**
Enumeration values used by wxFilterClassFactory.
*/
wxSTREAM_FILEEXT //!< File extensions the stream handles.
};
-
/**
@class wxFilterClassFactory
handle it and create a stream to decompress it:
@code
- factory = wxFilterClassFactory::Find(filename, wxSTREAM_FILEEXT);
+ factory = wxFilterClassFactory::Find(filename, wxSTREAM_FILEEXT);
if (factory)
- stream = factory-NewStream(new wxFFileInputStream(filename));
+ stream = factory->NewStream(new wxFFileInputStream(filename));
@endcode
wxFilterClassFactory::Find can also search for a factory by MIME type,
GetFirst()/GetNext() return a pointer to a factory or @NULL if no more
are available. They do not give away ownership of the factory.
*/
- static const wxFilterClassFactory* GetFirst() const;
+ static const wxFilterClassFactory* GetFirst();
const wxFilterClassFactory* GetNext() const;
//@}
list << *p << _T("\n");
@endcode
*/
- const wxChar* const* GetProtocols(wxStreamProtocolType type = wxSTREAM_PROTOCOL) const;
+ virtual const wxChar * const* GetProtocols(wxStreamProtocolType type = wxSTREAM_PROTOCOL) const = 0;
//@{
/**
If the parent stream is passed as a pointer then the new filter stream
takes ownership of it. If it is passed by reference then it does not.
*/
- wxFilterInputStream* NewStream(wxInputStream& stream) const;
- wxFilterOutputStream* NewStream(wxOutputStream& stream) const;
- wxFilterInputStream* NewStream(wxInputStream* stream) const;
- wxFilterOutputStream* NewStream(wxOutputStream* stream) const;
+ virtual wxFilterInputStream* NewStream(wxInputStream& stream) const = 0;
+ virtual wxFilterOutputStream* NewStream(wxOutputStream& stream) const = 0;
+ virtual wxFilterInputStream* NewStream(wxInputStream* stream) const = 0;
+ virtual wxFilterOutputStream* NewStream(wxOutputStream* stream) const = 0;
//@}
/**
{
public:
/**
- Creates a buffered stream using a buffer of a default size of 1024 bytes for
- cashing the stream @a parent.
- */
- wxBufferedOutputStream(const wxOutputStream& parent);
+ Constructor using the provided buffer or default.
- /**
- Destructor. Calls Sync() and destroys the internal buffer.
- */
- ~wxBufferedOutputStream();
-
- /**
- Calls Sync() and changes the stream position.
- */
- off_t SeekO(off_t pos, wxSeekMode mode);
-
- /**
- Flushes the buffer and calls Sync() on the parent stream.
- */
- void Sync();
-};
-
-
-
-/**
- @class wxInputStream
-
- wxInputStream is an abstract base class which may not be used directly.
-
- @library{wxbase}
- @category{streams}
-*/
-class wxInputStream : public wxStreamBase
-{
-public:
- /**
- Creates a dummy input stream.
- */
- wxInputStream();
-
- /**
- Destructor.
- */
- ~wxInputStream();
-
- /**
- Returns @true if some data is available in the stream right now, so that
- calling Read() wouldn't block.
- */
- bool CanRead() const;
-
- /**
- Returns @true after an attempt has been made to read past the end of the
- stream.
- */
- bool Eof() const;
-
- /**
- Returns the first character in the input queue and removes it,
- blocking until it appears if necessary.
- */
- char GetC();
-
- /**
- Returns the last number of bytes read.
- */
- size_t LastRead() const;
-
- /**
- Returns the first character in the input queue without removing it.
- */
- char Peek();
-
- /**
- Reads the specified amount of bytes and stores the data in buffer.
-
- @warning
- The buffer absolutely needs to have at least the specified size.
-
- @return This function returns a reference on the current object, so the
- user can test any states of the stream right away.
+ @param stream
+ The associated low-level stream.
+ @param buffer
+ The buffer to use if non-@NULL. Notice that the ownership of this
+ buffer is taken by the stream, i.e. it will delete it. If this
+ parameter is @NULL a default 1KB buffer is used.
*/
- wxInputStream Read(void* buffer, size_t size);
+ wxBufferedOutputStream(wxOutputStream& stream,
+ wxStreamBuffer *buffer = NULL);
/**
- Reads data from the input queue and stores it in the specified output stream.
- The data is read until an error is raised by one of the two streams.
-
- @return This function returns a reference on the current object, so the
- user can test any states of the stream right away.
- */
- wxInputStream& Read(wxOutputStream& stream_out);
+ Constructor allowing to specify the size of the buffer.
- /**
- Changes the stream current position.
+ This is just a more convenient alternative to creating a wxStreamBuffer
+ of the given size and using the other overloaded constructor of this
+ class.
- @param pos
- Offset to seek to.
- @param mode
- One of wxFromStart, wxFromEnd, wxFromCurrent.
+ @param stream
+ The associated low-level stream.
+ @param bufsize
+ The size of the buffer, in bytes.
- @return The new stream position or wxInvalidOffset on error.
- */
- off_t SeekI(off_t pos, wxSeekMode mode = wxFromStart);
+ @since 2.9.0
+ */
+ wxBufferedOutputStream(wxOutputStream& stream, size_t bufsize);
/**
- Returns the current stream position.
+ Destructor. Calls Sync() and destroys the internal buffer.
*/
- off_t TellI() const;
+ virtual ~wxBufferedOutputStream();
/**
- This function is only useful in read mode.
- It is the manager of the "Write-Back" buffer. This buffer acts like a
- temporary buffer where data which has to be read during the next read IO
- call are put. This is useful when you get a big block of data which you
- didn't want to read: you can replace them at the top of the input queue
- by this way.
-
- Be very careful about this call in connection with calling SeekI() on
- the same stream. Any call to SeekI() will invalidate any previous call
- to this method (otherwise you could SeekI() to one position, "unread" a
- few bytes there, SeekI() to another position and data would be either
- lost or corrupted).
-
- @return Returns the amount of bytes saved in the Write-Back buffer.
+ Calls Sync() and changes the stream position.
*/
- size_t Ungetch(const char* buffer, size_t size);
+ virtual wxFileOffset SeekO(wxFileOffset pos, wxSeekMode mode = wxFromStart);
/**
- This function acts like the previous one except that it takes only one
- character: it is sometimes shorter to use than the generic function.
+ Flushes the buffer and calls Sync() on the parent stream.
*/
- Return value bool Ungetch(char c);
+ virtual void Sync();
};
-/**
- These enumeration values are returned by various functions in the context
- of wxStream classes.
-*/
-enum wxStreamError
-{
- wxSTREAM_NO_ERROR = 0, //!< No error occurred.
- wxSTREAM_EOF, //!< EOF reached in Read() or similar.
- wxSTREAM_WRITE_ERROR, //!< generic write error on the last write call.
- wxSTREAM_READ_ERROR //!< generic read error on the last read call.
-};
-
-/**
- @class wxStreamBase
-
- This class is the base class of most stream related classes in wxWidgets.
- It must not be used directly.
-
- @library{wxbase}
- @category{streams}
-
- @see wxStreamBuffer
-*/
-class wxStreamBase
-{
-public:
- /**
- Creates a dummy stream object. It doesn't do anything.
- */
- wxStreamBase();
-
- /**
- Destructor.
- */
- ~wxStreamBase();
-
- /**
- This function returns the last error.
- */
- wxStreamError GetLastError() const;
-
- /**
- Returns the length of the stream in bytes. If the length cannot be
- determined (this is always the case for socket streams for example),
- returns @c wxInvalidOffset.
-
- @since 2.5.4
- */
- wxFileOffset GetLength() const;
-
- /**
- This function returns the size of the stream.
- For example, for a file it is the size of the file.
-
- @warning
- There are streams which do not have size by definition, such as socket
- streams. In that cases, GetSize returns 0 so you should always test its
- return value.
- */
- size_t GetSize() const;
-
- /**
- Returns @true if no error occurred on the stream.
-
- @see GetLastError()
- */
- virtual bool IsOk() const;
-
- /**
- Returns @true if the streams supports seeking to arbitrary offsets.
- */
- bool IsSeekable() const;
-
- /**
- Internal function. It is called when the stream wants to read data of the
- specified size. It should return the size that was actually read.
- */
- size_t OnSysRead(void* buffer, size_t bufsize);
-
- /**
- Internal function.
- It is called when the stream needs to change the current position.
- */
- off_t OnSysSeek(off_t pos, wxSeekMode mode);
-
- /**
- Internal function.
- It is called when the stream needs to know the real position.
- */
- off_t OnSysTell() const;
-
- /**
- See OnSysRead().
- */
- size_t OnSysWrite(const void* buffer, size_t bufsize);
-};
-
projects / wxWidgets.git / blobdiff