\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxApp::wxApp}
+\membersection{wxApp::wxApp}\label{wxappctor}
-\func{void}{wxApp}{\void}
+\func{}{wxApp}{\void}
Constructor. Called implicitly with a definition of a wxApp object.
-\membersection{wxApp::\destruct{wxApp}}
+\membersection{wxApp::\destruct{wxApp}}\label{wxappdtor}
-\func{void}{\destruct{wxApp}}{\void}
+\func{virtual}{\destruct{wxApp}}{\void}
Destructor. Will be called implicitly on program exit if the wxApp
object is created on the stack.
\membersection{wxApp::argv}\label{wxappargv}
-\member{char **}{argv}
+\member{wxChar **}{argv}
Command line arguments (after environment-specific processing).
\helpref{wxLog}{wxlog}
+\membersection{wxApp::CreateTraits}\label{wxappcreatetraits}
+
+\func{virtual wxAppTraits *}{CreateTraits}{\void}
+
+Creates the \helpref{wxAppTraits}{wxapptraits} object when \helpref{GetTraits}{wxappgettraits}
+needs it for the first time.
+
+\wxheading{See also}
+
+\helpref{wxAppTraits}{wxapptraits}
+
+
\membersection{wxApp::Dispatch}\label{wxappdispatch}
\func{virtual void}{Dispatch}{\void}
\helpref{wxApp::Pending}{wxapppending}
+\membersection{wxApp::ExitMainLoop}\label{wxappexitmainloop}
+
+\func{virtual void}{ExitMainLoop}{\void}
+
+Call this to explicitly exit the main message (event) loop.
+You should normally exit the main loop (and the application) by deleting
+the top window.
+
+
\membersection{wxApp::FilterEvent}\label{wxappfilterevent}
\func{int}{FilterEvent}{\param{wxEvent\& }{event}}
calling \helpref{wxApp::OnInit}{wxapponinit}, but the application can reset it at will.
-\membersection{wxApp::GetAuto3D}\label{wxappgetauto3d}
-
-\constfunc{bool}{GetAuto3D}{\void}
-
-Returns true if 3D control mode is on, false otherwise.
-
-\wxheading{See also}
-
-\helpref{wxApp::SetAuto3D}{wxappsetauto3d}
-
-
\membersection{wxApp::GetClassName}\label{wxappgetclassname}
\constfunc{wxString}{GetClassName}{\void}
\helpref{wxApp shutdown overview}{wxappshutdownoverview}
+\membersection{wxApp::GetInstance}\label{wxappgetinstance}
+
+\func{static wxAppConsole *}{GetInstance}{\void}
+
+Returns the one and only global application object.
+Usually \texttt{wxTheApp} is usead instead.
+
+\wxheading{See also}
+
+\helpref{wxApp::SetInstance}{wxappsetinstance}
+
+
\membersection{wxApp::GetTopWindow}\label{wxappgettopwindow}
\constfunc{virtual wxWindow *}{GetTopWindow}{\void}
\helpref{SetTopWindow}{wxappsettopwindow}
+
+\membersection{wxApp::GetTraits}\label{wxappgettraits}
+
+\func{wxAppTraits *}{GetTraits}{\void}
+
+Returns a pointer to the \helpref{wxAppTraits}{wxapptraits} object for the application.
+If you want to customize the \helpref{wxAppTraits}{wxapptraits} object, you must override the
+\helpref{CreateTraits}{wxappcreatetraits} function.
+
+
+
\membersection{wxApp::GetUseBestVisual}\label{wxappgetusebestvisual}
\constfunc{bool}{GetUseBestVisual}{\void}
Returns the application's vendor name.
-\membersection{wxApp::ExitMainLoop}\label{wxappexitmainloop}
+\membersection{wxApp::IsActive}\label{wxappisactive}
-\func{virtual void}{ExitMainLoop}{\void}
+\constfunc{bool}{IsActive}{\void}
-Call this to explicitly exit the main message (event) loop.
-You should normally exit the main loop (and the application) by deleting
-the top window.
+Returns \true if the application is active, i.e. if one of its windows is
+currently in the foreground. If this function returns \false and you need to
+attract users attention to the application, you may use
+\helpref{wxTopLevelWindow::RequestUserAttention}{wxtoplevelwindowrequestuserattention}
+to do it.
+
+
+\membersection{wxApp::IsMainLoopRunning}\label{wxappismainlooprunning}
+
+\func{static bool}{IsMainLoopRunning}{\void}
+
+Returns \true if the main event loop is currently running, i.e. if the
+application is inside \helpref{OnRun}{wxapponrun}.
+
+This can be useful to test whether events can be dispatched. For example,
+if this function returns \false, non-blocking sockets cannot be used because
+the events from them would never be processed.
\membersection{wxApp::MainLoop}\label{wxappmainloop}
%%\helpref{wxWindow::OnCharHook}{wxwindowoncharhook}, \helpref{wxDialog::OnCharHook}{wxdialogoncharhook}
-\membersection{wxApp::OnAssert}\label{wxapponassert}
+\membersection{wxApp::OnAssertFailure}\label{wxapponassertfailure}
-\func{void}{OnAssert}{\param{const wxChar }{*file}, \param{int }{line}, \param{const wxChar }{*cond}, \param{const wxChar }{*msg}}
+\func{void}{OnAssertFailure}{\param{const wxChar }{*file}, \param{int }{line}, \param{const wxChar }{*func}, \param{const wxChar }{*cond}, \param{const wxChar }{*msg}}
This function is called when an assert failure occurs, i.e. the condition
specified in \helpref{wxASSERT}{wxassert} macro evaluated to {\tt false}.
It is only called in debug mode (when {\tt \_\_WXDEBUG\_\_} is defined) as
asserts are not left in the release code at all.
-The base class version show the default assert failure dialog box proposing to
+The base class version shows the default assert failure dialog box proposing to
the user to stop the program, continue or ignore all subsequent asserts.
\wxheading{Parameters}
-\docparam{file}{the name of the source file where the assert occured}
+\docparam{file}{the name of the source file where the assert occurred}
+
+\docparam{line}{the line number in this file where the assert occurred}
-\docparam{line}{the line number in this file where the assert occured}
+\docparam{func}{the name of the function where the assert occurred, may be
+empty if the compiler doesn't support C99 \texttt{\_\_FUNCTION\_\_}}
-\docparam{cond}{the condition of the failed assert in string form}
+\docparam{cond}{the condition of the failed assert in text form}
\docparam{msg}{the message specified as argument to
\helpref{wxASSERT\_MSG}{wxassertmsg} or \helpref{wxFAIL\_MSG}{wxfailmsg}, will
\helpref{OnInitCmdLine}{wxapponinitcmdline}
-\membersection{wxApp::OnExceptionInMainLoop}{wxapponexceptioninmainloop}
+\membersection{wxApp::OnExceptionInMainLoop}\label{wxapponexceptioninmainloop}
\func{virtual bool}{OnExceptionInMainLoop}{\void}
%%\helpref{wxWindow::Close}{wxwindowclose},\rtfsp
%%\helpref{wxWindow::OnCloseWindow}{wxwindowonclosewindow},\rtfsp
%%\helpref{wxCloseEvent}{wxcloseevent},\rtfsp
-%%\helpref{wxApp::OnQueryEndSession}{wxapponqueryendsession}
\membersection{wxApp::OnInit}\label{wxapponinit}
parser with the command line options for this application. The base class
versions adds support for a few standard options only.
-
-\membersection{wxApp::OnQueryEndSession}\label{wxapponqueryendsession}
-
-\func{void}{OnQueryEndSession}{\param{wxCloseEvent\& }{event}}
-
-This is an event handler function called when the operating system or GUI session is
-about to close down. Typically, an application will try to save unsaved documents
-at this point.
-
-If \helpref{wxCloseEvent::CanVeto}{wxcloseeventcanveto} returns true, the application
-is allowed to veto the shutdown by calling \helpref{wxCloseEvent::Veto}{wxcloseeventveto}.
-The application might veto the shutdown after prompting for documents to be saved, and the
-user has cancelled the save.
-
-Use the EVT\_QUERY\_END\_SESSION event table macro to handle query end session events.
-
-You should check whether the application is forcing the deletion of the window
-using \helpref{wxCloseEvent::GetForce}{wxcloseeventgetforce}. If this is true,
-destroy the window using \helpref{wxWindow::Destroy}{wxwindowdestroy}.
-If not, it is up to you whether you respond by destroying the window.
-
-The default handler calls \helpref{wxWindow::Close}{wxwindowclose} on the top-level window,
-and vetoes the shutdown if Close returns false. This will be sufficient for many applications.
-
-\wxheading{Remarks}
-
-Under X, OnQueryEndSession is called in response to the `save session' event.
-
-Under Windows, OnQueryEndSession is called in response to the WM\_QUERYENDSESSION message.
-
-\wxheading{See also}
-
-\helpref{wxWindow::Close}{wxwindowclose},\rtfsp
-\helpref{wxCloseEvent}{wxcloseevent}\rtfsp
-
-
\membersection{wxApp::OnRun}\label{wxapponrun}
\func{virtual int}{OnRun}{\void}
This function is called when an unhandled C++ exception occurs inside
\helpref{OnRun()}{wxapponrun} (the exceptions which occur during the program
-startup and shutdown might not be caught at all).
-Note that the exception type is lost by now, so if you want to really handle
-the exception you should override \helpref{OnRun()}{wxapponrun} and put a
-try/catch clause around the call to the base class version there.
+startup and shutdown might not be caught at all). Notice that by now the main
+event loop has been terminated and the program will exit, if you want to
+prevent this from happening (i.e. continue running after catching an exception)
+you need to override \helpref{OnExceptionInMainLoop}{wxapponexceptioninmainloop}.
+
+The default implementation shows information about the exception in debug build
+but does nothing in the release build.
\membersection{wxApp::ProcessMessage}\label{wxappprocessmessage}
\helpref{wxApp::GetAppName}{wxappgetappname}
-\membersection{wxApp::SetAuto3D}\label{wxappsetauto3d}
-
-\func{void}{SetAuto3D}{\param{const bool}{ auto3D}}
-
-Switches automatic 3D controls on or off.
-
-\wxheading{Parameters}
-
-\docparam{auto3D}{If true, all controls will be created with 3D appearances unless
-overridden for a control or dialog. The default is true}
-
-\wxheading{Remarks}
-
-This has an effect on Windows only.
-
-\wxheading{See also}
-
-\helpref{wxApp::GetAuto3D}{wxappgetauto3d}
-
-
\membersection{wxApp::SetClassName}\label{wxappsetclassname}
\func{void}{SetClassName}{\param{const wxString\& }{name}}
\helpref{wxApp shutdown overview}{wxappshutdownoverview}
+\membersection{wxApp::SetInstance}\label{wxappsetinstance}
+
+\func{static void}{SetInstance}{\param{wxAppConsole* }{app}}
+
+Allows external code to modify global \texttt{wxTheApp}, but you should really
+know what you're doing if you call it.
+
+\wxheading{Parameters}
+
+\docparam{app}{Replacement for the global application object.}
+
+\wxheading{See also}
+
+\helpref{wxApp::GetInstance}{wxappgetinstance}
+
+
\membersection{wxApp::SetTopWindow}\label{wxappsettopwindow}
\func{void}{SetTopWindow}{\param{wxWindow* }{window}}
\membersection{wxApp::SetUseBestVisual}\label{wxappsetusebestvisual}
-\func{void}{SetUseBestVisual}{\param{bool}{ flag}}
+\func{void}{SetUseBestVisual}{\param{bool}{ flag}, \param{bool}{ forceTrueColour = false}}
Allows the programmer to specify whether the application will use the best visual
on systems that support several visual on the same display. This is typically the
case under Solaris and IRIX, where the default visual is only 8-bit whereas certain
applications are supposed to run in TrueColour mode.
+If \arg{forceTrueColour} is true then the application will try to force
+using a TrueColour visual and abort the app if none is found.
+
Note that this function has to be called in the constructor of the {\tt wxApp}
instance and won't have any effect when called later on.
iteration), call \helpref{wxLog::FlushActive}{wxlogflushactive}.
Calling Yield() recursively is normally an error and an assert failure is
-raised in debug build if such situation is detected. However if the the
+raised in debug build if such situation is detected. However if the
{\it onlyIfNeeded} parameter is {\tt true}, the method will just silently
return {\tt false} instead.
projects / wxWidgets.git / blobdiff