# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.14
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.14"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
if test "$withval" = yes; then
ac_cv_use_libtiff='wxUSE_LIBTIFF=yes'
- else
+ elif test "$withval" = no; then
ac_cv_use_libtiff='wxUSE_LIBTIFF=no'
+ elif test "$withval" = sys; then
+ ac_cv_use_libtiff='wxUSE_LIBTIFF=sys'
+ else
+ { echo "configure: error: Invalid value for --with-libtiff: should be yes, no or sys" 1>&2; exit 1; }
fi
else
if test "$wxUSE_LIBTIFF" = yes; then
echo "$ac_t""yes" 1>&6
- else
+ elif test "$wxUSE_LIBTIFF" = no; then
echo "$ac_t""no" 1>&6
+ elif test "$wxUSE_LIBTIFF" = sys; then
+ echo "$ac_t""system version" 1>&6
+ else
+ { echo "configure: error: Invalid value for --with-libtiff: should be yes, no or sys" 1>&2; exit 1; }
fi
echo $ac_n "checking "for --with-opengl"""... $ac_c" 1>&6
-echo "configure:1720: checking "for --with-opengl"" >&5
+echo "configure:1728: checking "for --with-opengl"" >&5
no_cache=0
# Check whether --with-opengl or --without-opengl was given.
if test "${with_opengl+set}" = set; then
echo $ac_n "checking "for --with-dmalloc"""... $ac_c" 1>&6
-echo "configure:1762: checking "for --with-dmalloc"" >&5
+echo "configure:1770: checking "for --with-dmalloc"" >&5
no_cache=0
# Check whether --with-dmalloc or --without-dmalloc was given.
if test "${with_dmalloc+set}" = set; then
echo $ac_n "checking "for --with-zlib"""... $ac_c" 1>&6
-echo "configure:1801: checking "for --with-zlib"" >&5
+echo "configure:1809: checking "for --with-zlib"" >&5
no_cache=0
# Check whether --with-zlib or --without-zlib was given.
if test "${with_zlib+set}" = set; then
echo $ac_n "checking "for --with-odbc"""... $ac_c" 1>&6
-echo "configure:1848: checking "for --with-odbc"" >&5
+echo "configure:1856: checking "for --with-odbc"" >&5
no_cache=0
# Check whether --with-odbc or --without-odbc was given.
if test "${with_odbc+set}" = set; then
echo $ac_n "checking "for --enable-shared"""... $ac_c" 1>&6
-echo "configure:1890: checking "for --enable-shared"" >&5
+echo "configure:1898: checking "for --enable-shared"" >&5
no_cache=0
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
echo $ac_n "checking "for --enable-burnt_name"""... $ac_c" 1>&6
-echo "configure:1929: checking "for --enable-burnt_name"" >&5
+echo "configure:1937: checking "for --enable-burnt_name"" >&5
no_cache=0
# Check whether --enable-burnt_name or --disable-burnt_name was given.
if test "${enable_burnt_name+set}" = set; then
echo $ac_n "checking "for --enable-optimise"""... $ac_c" 1>&6
-echo "configure:1968: checking "for --enable-optimise"" >&5
+echo "configure:1976: checking "for --enable-optimise"" >&5
no_cache=0
# Check whether --enable-optimise or --disable-optimise was given.
if test "${enable_optimise+set}" = set; then
echo $ac_n "checking "for --enable-debug"""... $ac_c" 1>&6
-echo "configure:2007: checking "for --enable-debug"" >&5
+echo "configure:2015: checking "for --enable-debug"" >&5
no_cache=0
# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
echo $ac_n "checking "for --enable-debug_flag"""... $ac_c" 1>&6
-echo "configure:2055: checking "for --enable-debug_flag"" >&5
+echo "configure:2063: checking "for --enable-debug_flag"" >&5
no_cache=0
# Check whether --enable-debug_flag or --disable-debug_flag was given.
if test "${enable_debug_flag+set}" = set; then
echo $ac_n "checking "for --enable-debug_info"""... $ac_c" 1>&6
-echo "configure:2094: checking "for --enable-debug_info"" >&5
+echo "configure:2102: checking "for --enable-debug_info"" >&5
no_cache=0
# Check whether --enable-debug_info or --disable-debug_info was given.
if test "${enable_debug_info+set}" = set; then
echo $ac_n "checking "for --enable-debug_gdb"""... $ac_c" 1>&6
-echo "configure:2133: checking "for --enable-debug_gdb"" >&5
+echo "configure:2141: checking "for --enable-debug_gdb"" >&5
no_cache=0
# Check whether --enable-debug_gdb or --disable-debug_gdb was given.
if test "${enable_debug_gdb+set}" = set; then
echo $ac_n "checking "for --enable-debug_cntxt"""... $ac_c" 1>&6
-echo "configure:2172: checking "for --enable-debug_cntxt"" >&5
+echo "configure:2180: checking "for --enable-debug_cntxt"" >&5
no_cache=0
# Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
if test "${enable_debug_cntxt+set}" = set; then
echo $ac_n "checking "for --enable-mem_tracing"""... $ac_c" 1>&6
-echo "configure:2211: checking "for --enable-mem_tracing"" >&5
+echo "configure:2219: checking "for --enable-mem_tracing"" >&5
no_cache=0
# Check whether --enable-mem_tracing or --disable-mem_tracing was given.
if test "${enable_mem_tracing+set}" = set; then
echo $ac_n "checking "for --enable-profile"""... $ac_c" 1>&6
-echo "configure:2250: checking "for --enable-profile"" >&5
+echo "configure:2258: checking "for --enable-profile"" >&5
no_cache=0
# Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
echo $ac_n "checking "for --enable-no_rtti"""... $ac_c" 1>&6
-echo "configure:2289: checking "for --enable-no_rtti"" >&5
+echo "configure:2297: checking "for --enable-no_rtti"" >&5
no_cache=0
# Check whether --enable-no_rtti or --disable-no_rtti was given.
if test "${enable_no_rtti+set}" = set; then
echo $ac_n "checking "for --enable-no_exceptions"""... $ac_c" 1>&6
-echo "configure:2328: checking "for --enable-no_exceptions"" >&5
+echo "configure:2336: checking "for --enable-no_exceptions"" >&5
no_cache=0
# Check whether --enable-no_exceptions or --disable-no_exceptions was given.
if test "${enable_no_exceptions+set}" = set; then
echo $ac_n "checking "for --enable-permissive"""... $ac_c" 1>&6
-echo "configure:2367: checking "for --enable-permissive"" >&5
+echo "configure:2375: checking "for --enable-permissive"" >&5
no_cache=0
# Check whether --enable-permissive or --disable-permissive was given.
if test "${enable_permissive+set}" = set; then
echo $ac_n "checking "for --enable-no_deps"""... $ac_c" 1>&6
-echo "configure:2406: checking "for --enable-no_deps"" >&5
+echo "configure:2414: checking "for --enable-no_deps"" >&5
no_cache=0
# Check whether --enable-no_deps or --disable-no_deps was given.
if test "${enable_no_deps+set}" = set; then
echo $ac_n "checking "for --enable-intl"""... $ac_c" 1>&6
-echo "configure:2447: checking "for --enable-intl"" >&5
+echo "configure:2455: checking "for --enable-intl"" >&5
no_cache=0
# Check whether --enable-intl or --disable-intl was given.
if test "${enable_intl+set}" = set; then
echo $ac_n "checking "for --enable-config"""... $ac_c" 1>&6
-echo "configure:2486: checking "for --enable-config"" >&5
+echo "configure:2494: checking "for --enable-config"" >&5
no_cache=0
# Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
if test "$wxUSE_GUI" = "yes"; then
echo $ac_n "checking "for --enable-sockets"""... $ac_c" 1>&6
-echo "configure:2527: checking "for --enable-sockets"" >&5
+echo "configure:2535: checking "for --enable-sockets"" >&5
no_cache=0
# Check whether --enable-sockets or --disable-sockets was given.
if test "${enable_sockets+set}" = set; then
echo $ac_n "checking "for --enable-dialupman"""... $ac_c" 1>&6
-echo "configure:2570: checking "for --enable-dialupman"" >&5
+echo "configure:2578: checking "for --enable-dialupman"" >&5
no_cache=0
# Check whether --enable-dialupman or --disable-dialupman was given.
if test "${enable_dialupman+set}" = set; then
echo $ac_n "checking "for --enable-ipc"""... $ac_c" 1>&6
-echo "configure:2609: checking "for --enable-ipc"" >&5
+echo "configure:2617: checking "for --enable-ipc"" >&5
no_cache=0
# Check whether --enable-ipc or --disable-ipc was given.
if test "${enable_ipc+set}" = set; then
echo $ac_n "checking "for --enable-apple_ieee"""... $ac_c" 1>&6
-echo "configure:2648: checking "for --enable-apple_ieee"" >&5
+echo "configure:2656: checking "for --enable-apple_ieee"" >&5
no_cache=0
# Check whether --enable-apple_ieee or --disable-apple_ieee was given.
if test "${enable_apple_ieee+set}" = set; then
echo $ac_n "checking "for --enable-timedate"""... $ac_c" 1>&6
-echo "configure:2687: checking "for --enable-timedate"" >&5
+echo "configure:2695: checking "for --enable-timedate"" >&5
no_cache=0
# Check whether --enable-timedate or --disable-timedate was given.
if test "${enable_timedate+set}" = set; then
echo $ac_n "checking "for --enable-wave"""... $ac_c" 1>&6
-echo "configure:2726: checking "for --enable-wave"" >&5
+echo "configure:2734: checking "for --enable-wave"" >&5
no_cache=0
# Check whether --enable-wave or --disable-wave was given.
if test "${enable_wave+set}" = set; then
echo $ac_n "checking "for --enable-fraction"""... $ac_c" 1>&6
-echo "configure:2765: checking "for --enable-fraction"" >&5
+echo "configure:2773: checking "for --enable-fraction"" >&5
no_cache=0
# Check whether --enable-fraction or --disable-fraction was given.
if test "${enable_fraction+set}" = set; then
echo $ac_n "checking "for --enable-dynlib"""... $ac_c" 1>&6
-echo "configure:2804: checking "for --enable-dynlib"" >&5
+echo "configure:2812: checking "for --enable-dynlib"" >&5
no_cache=0
# Check whether --enable-dynlib or --disable-dynlib was given.
if test "${enable_dynlib+set}" = set; then
echo $ac_n "checking "for --enable-longlong"""... $ac_c" 1>&6
-echo "configure:2843: checking "for --enable-longlong"" >&5
+echo "configure:2851: checking "for --enable-longlong"" >&5
no_cache=0
# Check whether --enable-longlong or --disable-longlong was given.
if test "${enable_longlong+set}" = set; then
echo $ac_n "checking "for --enable-log"""... $ac_c" 1>&6
-echo "configure:2882: checking "for --enable-log"" >&5
+echo "configure:2890: checking "for --enable-log"" >&5
no_cache=0
# Check whether --enable-log or --disable-log was given.
if test "${enable_log+set}" = set; then
echo $ac_n "checking "for --enable-streams"""... $ac_c" 1>&6
-echo "configure:2921: checking "for --enable-streams"" >&5
+echo "configure:2929: checking "for --enable-streams"" >&5
no_cache=0
# Check whether --enable-streams or --disable-streams was given.
if test "${enable_streams+set}" = set; then
echo $ac_n "checking "for --enable-file"""... $ac_c" 1>&6
-echo "configure:2960: checking "for --enable-file"" >&5
+echo "configure:2968: checking "for --enable-file"" >&5
no_cache=0
# Check whether --enable-file or --disable-file was given.
if test "${enable_file+set}" = set; then
echo $ac_n "checking "for --enable-textfile"""... $ac_c" 1>&6
-echo "configure:2999: checking "for --enable-textfile"" >&5
+echo "configure:3007: checking "for --enable-textfile"" >&5
no_cache=0
# Check whether --enable-textfile or --disable-textfile was given.
if test "${enable_textfile+set}" = set; then
echo $ac_n "checking "for --enable-unicode"""... $ac_c" 1>&6
-echo "configure:3038: checking "for --enable-unicode"" >&5
+echo "configure:3046: checking "for --enable-unicode"" >&5
no_cache=0
# Check whether --enable-unicode or --disable-unicode was given.
if test "${enable_unicode+set}" = set; then
echo $ac_n "checking "for --enable-wcsrtombs"""... $ac_c" 1>&6
-echo "configure:3077: checking "for --enable-wcsrtombs"" >&5
+echo "configure:3085: checking "for --enable-wcsrtombs"" >&5
no_cache=0
# Check whether --enable-wcsrtombs or --disable-wcsrtombs was given.
if test "${enable_wcsrtombs+set}" = set; then
echo $ac_n "checking "for --enable-wxprintfv"""... $ac_c" 1>&6
-echo "configure:3116: checking "for --enable-wxprintfv"" >&5
+echo "configure:3124: checking "for --enable-wxprintfv"" >&5
no_cache=0
# Check whether --enable-wxprintfv or --disable-wxprintfv was given.
if test "${enable_wxprintfv+set}" = set; then
echo $ac_n "checking "for --enable-joystick"""... $ac_c" 1>&6
-echo "configure:3155: checking "for --enable-joystick"" >&5
+echo "configure:3163: checking "for --enable-joystick"" >&5
no_cache=0
# Check whether --enable-joystick or --disable-joystick was given.
if test "${enable_joystick+set}" = set; then
echo $ac_n "checking "for --enable-std_iostreams"""... $ac_c" 1>&6
-echo "configure:3194: checking "for --enable-std_iostreams"" >&5
+echo "configure:3202: checking "for --enable-std_iostreams"" >&5
no_cache=0
# Check whether --enable-std_iostreams or --disable-std_iostreams was given.
if test "${enable_std_iostreams+set}" = set; then
echo $ac_n "checking "for --enable-filesystem"""... $ac_c" 1>&6
-echo "configure:3233: checking "for --enable-filesystem"" >&5
+echo "configure:3241: checking "for --enable-filesystem"" >&5
no_cache=0
# Check whether --enable-filesystem or --disable-filesystem was given.
if test "${enable_filesystem+set}" = set; then
echo $ac_n "checking "for --enable-fs_inet"""... $ac_c" 1>&6
-echo "configure:3272: checking "for --enable-fs_inet"" >&5
+echo "configure:3280: checking "for --enable-fs_inet"" >&5
no_cache=0
# Check whether --enable-fs_inet or --disable-fs_inet was given.
if test "${enable_fs_inet+set}" = set; then
echo $ac_n "checking "for --enable-fs_zip"""... $ac_c" 1>&6
-echo "configure:3311: checking "for --enable-fs_zip"" >&5
+echo "configure:3319: checking "for --enable-fs_zip"" >&5
no_cache=0
# Check whether --enable-fs_zip or --disable-fs_zip was given.
if test "${enable_fs_zip+set}" = set; then
echo $ac_n "checking "for --enable-zipstream"""... $ac_c" 1>&6
-echo "configure:3350: checking "for --enable-zipstream"" >&5
+echo "configure:3358: checking "for --enable-zipstream"" >&5
no_cache=0
# Check whether --enable-zipstream or --disable-zipstream was given.
if test "${enable_zipstream+set}" = set; then
echo $ac_n "checking "for --enable-threads"""... $ac_c" 1>&6
-echo "configure:3391: checking "for --enable-threads"" >&5
+echo "configure:3399: checking "for --enable-threads"" >&5
no_cache=0
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
echo $ac_n "checking "for --enable-serial"""... $ac_c" 1>&6
-echo "configure:3430: checking "for --enable-serial"" >&5
+echo "configure:3438: checking "for --enable-serial"" >&5
no_cache=0
# Check whether --enable-serial or --disable-serial was given.
if test "${enable_serial+set}" = set; then
echo $ac_n "checking "for --enable-docview"""... $ac_c" 1>&6
-echo "configure:3473: checking "for --enable-docview"" >&5
+echo "configure:3481: checking "for --enable-docview"" >&5
no_cache=0
# Check whether --enable-docview or --disable-docview was given.
if test "${enable_docview+set}" = set; then
echo $ac_n "checking "for --enable-help"""... $ac_c" 1>&6
-echo "configure:3512: checking "for --enable-help"" >&5
+echo "configure:3520: checking "for --enable-help"" >&5
no_cache=0
# Check whether --enable-help or --disable-help was given.
if test "${enable_help+set}" = set; then
echo $ac_n "checking "for --enable-constraints"""... $ac_c" 1>&6
-echo "configure:3551: checking "for --enable-constraints"" >&5
+echo "configure:3559: checking "for --enable-constraints"" >&5
no_cache=0
# Check whether --enable-constraints or --disable-constraints was given.
if test "${enable_constraints+set}" = set; then
echo $ac_n "checking "for --enable-printarch"""... $ac_c" 1>&6
-echo "configure:3590: checking "for --enable-printarch"" >&5
+echo "configure:3598: checking "for --enable-printarch"" >&5
no_cache=0
# Check whether --enable-printarch or --disable-printarch was given.
if test "${enable_printarch+set}" = set; then
echo $ac_n "checking "for --enable-mdi"""... $ac_c" 1>&6
-echo "configure:3629: checking "for --enable-mdi"" >&5
+echo "configure:3637: checking "for --enable-mdi"" >&5
no_cache=0
# Check whether --enable-mdi or --disable-mdi was given.
if test "${enable_mdi+set}" = set; then
echo $ac_n "checking "for --enable-postscript"""... $ac_c" 1>&6
-echo "configure:3669: checking "for --enable-postscript"" >&5
+echo "configure:3677: checking "for --enable-postscript"" >&5
no_cache=0
# Check whether --enable-postscript or --disable-postscript was given.
if test "${enable_postscript+set}" = set; then
echo $ac_n "checking "for --enable-prologio"""... $ac_c" 1>&6
-echo "configure:3710: checking "for --enable-prologio"" >&5
+echo "configure:3718: checking "for --enable-prologio"" >&5
no_cache=0
# Check whether --enable-prologio or --disable-prologio was given.
if test "${enable_prologio+set}" = set; then
echo $ac_n "checking "for --enable-resources"""... $ac_c" 1>&6
-echo "configure:3749: checking "for --enable-resources"" >&5
+echo "configure:3757: checking "for --enable-resources"" >&5
no_cache=0
# Check whether --enable-resources or --disable-resources was given.
if test "${enable_resources+set}" = set; then
echo $ac_n "checking "for --enable-xresources"""... $ac_c" 1>&6
-echo "configure:3789: checking "for --enable-xresources"" >&5
+echo "configure:3797: checking "for --enable-xresources"" >&5
no_cache=0
# Check whether --enable-xresources or --disable-xresources was given.
if test "${enable_xresources+set}" = set; then
echo $ac_n "checking "for --enable-clipboard"""... $ac_c" 1>&6
-echo "configure:3830: checking "for --enable-clipboard"" >&5
+echo "configure:3838: checking "for --enable-clipboard"" >&5
no_cache=0
# Check whether --enable-clipboard or --disable-clipboard was given.
if test "${enable_clipboard+set}" = set; then
echo $ac_n "checking "for --enable-dnd"""... $ac_c" 1>&6
-echo "configure:3869: checking "for --enable-dnd"" >&5
+echo "configure:3877: checking "for --enable-dnd"" >&5
no_cache=0
# Check whether --enable-dnd or --disable-dnd was given.
if test "${enable_dnd+set}" = set; then
echo $ac_n "checking "for --enable-wxtree"""... $ac_c" 1>&6
-echo "configure:3909: checking "for --enable-wxtree"" >&5
+echo "configure:3917: checking "for --enable-wxtree"" >&5
no_cache=0
# Check whether --enable-wxtree or --disable-wxtree was given.
if test "${enable_wxtree+set}" = set; then
echo $ac_n "checking "for --enable-controls"""... $ac_c" 1>&6
-echo "configure:3950: checking "for --enable-controls"" >&5
+echo "configure:3958: checking "for --enable-controls"" >&5
no_cache=0
# Check whether --enable-controls or --disable-controls was given.
if test "${enable_controls+set}" = set; then
echo $ac_n "checking "for --enable-accel"""... $ac_c" 1>&6
-echo "configure:4058: checking "for --enable-accel"" >&5
+echo "configure:4066: checking "for --enable-accel"" >&5
no_cache=0
# Check whether --enable-accel or --disable-accel was given.
if test "${enable_accel+set}" = set; then
echo $ac_n "checking "for --enable-caret"""... $ac_c" 1>&6
-echo "configure:4097: checking "for --enable-caret"" >&5
+echo "configure:4105: checking "for --enable-caret"" >&5
no_cache=0
# Check whether --enable-caret or --disable-caret was given.
if test "${enable_caret+set}" = set; then
echo $ac_n "checking "for --enable-bmpbutton"""... $ac_c" 1>&6
-echo "configure:4136: checking "for --enable-bmpbutton"" >&5
+echo "configure:4144: checking "for --enable-bmpbutton"" >&5
no_cache=0
# Check whether --enable-bmpbutton or --disable-bmpbutton was given.
if test "${enable_bmpbutton+set}" = set; then
echo $ac_n "checking "for --enable-checkbox"""... $ac_c" 1>&6
-echo "configure:4175: checking "for --enable-checkbox"" >&5
+echo "configure:4183: checking "for --enable-checkbox"" >&5
no_cache=0
# Check whether --enable-checkbox or --disable-checkbox was given.
if test "${enable_checkbox+set}" = set; then
echo $ac_n "checking "for --enable-checklst"""... $ac_c" 1>&6
-echo "configure:4214: checking "for --enable-checklst"" >&5
+echo "configure:4222: checking "for --enable-checklst"" >&5
no_cache=0
# Check whether --enable-checklst or --disable-checklst was given.
if test "${enable_checklst+set}" = set; then
echo $ac_n "checking "for --enable-choice"""... $ac_c" 1>&6
-echo "configure:4253: checking "for --enable-choice"" >&5
+echo "configure:4261: checking "for --enable-choice"" >&5
no_cache=0
# Check whether --enable-choice or --disable-choice was given.
if test "${enable_choice+set}" = set; then
echo $ac_n "checking "for --enable-combobox"""... $ac_c" 1>&6
-echo "configure:4292: checking "for --enable-combobox"" >&5
+echo "configure:4300: checking "for --enable-combobox"" >&5
no_cache=0
# Check whether --enable-combobox or --disable-combobox was given.
if test "${enable_combobox+set}" = set; then
echo $ac_n "checking "for --enable-gauge"""... $ac_c" 1>&6
-echo "configure:4331: checking "for --enable-gauge"" >&5
+echo "configure:4339: checking "for --enable-gauge"" >&5
no_cache=0
# Check whether --enable-gauge or --disable-gauge was given.
if test "${enable_gauge+set}" = set; then
echo $ac_n "checking "for --enable-grid"""... $ac_c" 1>&6
-echo "configure:4370: checking "for --enable-grid"" >&5
+echo "configure:4378: checking "for --enable-grid"" >&5
no_cache=0
# Check whether --enable-grid or --disable-grid was given.
if test "${enable_grid+set}" = set; then
echo $ac_n "checking "for --enable-newgrid"""... $ac_c" 1>&6
-echo "configure:4409: checking "for --enable-newgrid"" >&5
+echo "configure:4417: checking "for --enable-newgrid"" >&5
no_cache=0
# Check whether --enable-newgrid or --disable-newgrid was given.
if test "${enable_newgrid+set}" = set; then
echo $ac_n "checking "for --enable-imaglist"""... $ac_c" 1>&6
-echo "configure:4448: checking "for --enable-imaglist"" >&5
+echo "configure:4456: checking "for --enable-imaglist"" >&5
no_cache=0
# Check whether --enable-imaglist or --disable-imaglist was given.
if test "${enable_imaglist+set}" = set; then
echo $ac_n "checking "for --enable-listbox"""... $ac_c" 1>&6
-echo "configure:4487: checking "for --enable-listbox"" >&5
+echo "configure:4495: checking "for --enable-listbox"" >&5
no_cache=0
# Check whether --enable-listbox or --disable-listbox was given.
if test "${enable_listbox+set}" = set; then
echo $ac_n "checking "for --enable-listctrl"""... $ac_c" 1>&6
-echo "configure:4526: checking "for --enable-listctrl"" >&5
+echo "configure:4534: checking "for --enable-listctrl"" >&5
no_cache=0
# Check whether --enable-listctrl or --disable-listctrl was given.
if test "${enable_listctrl+set}" = set; then
echo $ac_n "checking "for --enable-notebook"""... $ac_c" 1>&6
-echo "configure:4565: checking "for --enable-notebook"" >&5
+echo "configure:4573: checking "for --enable-notebook"" >&5
no_cache=0
# Check whether --enable-notebook or --disable-notebook was given.
if test "${enable_notebook+set}" = set; then
echo $ac_n "checking "for --enable-radiobox"""... $ac_c" 1>&6
-echo "configure:4604: checking "for --enable-radiobox"" >&5
+echo "configure:4612: checking "for --enable-radiobox"" >&5
no_cache=0
# Check whether --enable-radiobox or --disable-radiobox was given.
if test "${enable_radiobox+set}" = set; then
echo $ac_n "checking "for --enable-radiobtn"""... $ac_c" 1>&6
-echo "configure:4643: checking "for --enable-radiobtn"" >&5
+echo "configure:4651: checking "for --enable-radiobtn"" >&5
no_cache=0
# Check whether --enable-radiobtn or --disable-radiobtn was given.
if test "${enable_radiobtn+set}" = set; then
echo $ac_n "checking "for --enable-sash"""... $ac_c" 1>&6
-echo "configure:4682: checking "for --enable-sash"" >&5
+echo "configure:4690: checking "for --enable-sash"" >&5
no_cache=0
# Check whether --enable-sash or --disable-sash was given.
if test "${enable_sash+set}" = set; then
echo $ac_n "checking "for --enable-scrollbar"""... $ac_c" 1>&6
-echo "configure:4721: checking "for --enable-scrollbar"" >&5
+echo "configure:4729: checking "for --enable-scrollbar"" >&5
no_cache=0
# Check whether --enable-scrollbar or --disable-scrollbar was given.
if test "${enable_scrollbar+set}" = set; then
echo $ac_n "checking "for --enable-slider"""... $ac_c" 1>&6
-echo "configure:4760: checking "for --enable-slider"" >&5
+echo "configure:4768: checking "for --enable-slider"" >&5
no_cache=0
# Check whether --enable-slider or --disable-slider was given.
if test "${enable_slider+set}" = set; then
echo $ac_n "checking "for --enable-spinbtn"""... $ac_c" 1>&6
-echo "configure:4799: checking "for --enable-spinbtn"" >&5
+echo "configure:4807: checking "for --enable-spinbtn"" >&5
no_cache=0
# Check whether --enable-spinbtn or --disable-spinbtn was given.
if test "${enable_spinbtn+set}" = set; then
echo $ac_n "checking "for --enable-spinctrl"""... $ac_c" 1>&6
-echo "configure:4838: checking "for --enable-spinctrl"" >&5
+echo "configure:4846: checking "for --enable-spinctrl"" >&5
no_cache=0
# Check whether --enable-spinctrl or --disable-spinctrl was given.
if test "${enable_spinctrl+set}" = set; then
echo $ac_n "checking "for --enable-splitter"""... $ac_c" 1>&6
-echo "configure:4877: checking "for --enable-splitter"" >&5
+echo "configure:4885: checking "for --enable-splitter"" >&5
no_cache=0
# Check whether --enable-splitter or --disable-splitter was given.
if test "${enable_splitter+set}" = set; then
echo $ac_n "checking "for --enable-statbmp"""... $ac_c" 1>&6
-echo "configure:4916: checking "for --enable-statbmp"" >&5
+echo "configure:4924: checking "for --enable-statbmp"" >&5
no_cache=0
# Check whether --enable-statbmp or --disable-statbmp was given.
if test "${enable_statbmp+set}" = set; then
echo $ac_n "checking "for --enable-statbox"""... $ac_c" 1>&6
-echo "configure:4955: checking "for --enable-statbox"" >&5
+echo "configure:4963: checking "for --enable-statbox"" >&5
no_cache=0
# Check whether --enable-statbox or --disable-statbox was given.
if test "${enable_statbox+set}" = set; then
echo $ac_n "checking "for --enable-statline"""... $ac_c" 1>&6
-echo "configure:4994: checking "for --enable-statline"" >&5
+echo "configure:5002: checking "for --enable-statline"" >&5
no_cache=0
# Check whether --enable-statline or --disable-statline was given.
if test "${enable_statline+set}" = set; then
echo $ac_n "checking "for --enable-statusbar"""... $ac_c" 1>&6
-echo "configure:5033: checking "for --enable-statusbar"" >&5
+echo "configure:5041: checking "for --enable-statusbar"" >&5
no_cache=0
# Check whether --enable-statusbar or --disable-statusbar was given.
if test "${enable_statusbar+set}" = set; then
echo $ac_n "checking "for --enable-tabdialog"""... $ac_c" 1>&6
-echo "configure:5072: checking "for --enable-tabdialog"" >&5
+echo "configure:5080: checking "for --enable-tabdialog"" >&5
no_cache=0
# Check whether --enable-tabdialog or --disable-tabdialog was given.
if test "${enable_tabdialog+set}" = set; then
echo $ac_n "checking "for --enable-toolbar"""... $ac_c" 1>&6
-echo "configure:5111: checking "for --enable-toolbar"" >&5
+echo "configure:5119: checking "for --enable-toolbar"" >&5
no_cache=0
# Check whether --enable-toolbar or --disable-toolbar was given.
if test "${enable_toolbar+set}" = set; then
echo $ac_n "checking "for --enable-tbarnative"""... $ac_c" 1>&6
-echo "configure:5150: checking "for --enable-tbarnative"" >&5
+echo "configure:5158: checking "for --enable-tbarnative"" >&5
no_cache=0
# Check whether --enable-tbarnative or --disable-tbarnative was given.
if test "${enable_tbarnative+set}" = set; then
echo $ac_n "checking "for --enable-tbarsmpl"""... $ac_c" 1>&6
-echo "configure:5189: checking "for --enable-tbarsmpl"" >&5
+echo "configure:5197: checking "for --enable-tbarsmpl"" >&5
no_cache=0
# Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
if test "${enable_tbarsmpl+set}" = set; then
echo $ac_n "checking "for --enable-treectrl"""... $ac_c" 1>&6
-echo "configure:5228: checking "for --enable-treectrl"" >&5
+echo "configure:5236: checking "for --enable-treectrl"" >&5
no_cache=0
# Check whether --enable-treectrl or --disable-treectrl was given.
if test "${enable_treectrl+set}" = set; then
echo $ac_n "checking "for --enable-commondlg"""... $ac_c" 1>&6
-echo "configure:5269: checking "for --enable-commondlg"" >&5
+echo "configure:5277: checking "for --enable-commondlg"" >&5
no_cache=0
# Check whether --enable-commondlg or --disable-commondlg was given.
if test "${enable_commondlg+set}" = set; then
echo $ac_n "checking "for --enable-dirdlg"""... $ac_c" 1>&6
-echo "configure:5308: checking "for --enable-dirdlg"" >&5
+echo "configure:5316: checking "for --enable-dirdlg"" >&5
no_cache=0
# Check whether --enable-dirdlg or --disable-dirdlg was given.
if test "${enable_dirdlg+set}" = set; then
echo $ac_n "checking "for --enable-textdlg"""... $ac_c" 1>&6
-echo "configure:5347: checking "for --enable-textdlg"" >&5
+echo "configure:5355: checking "for --enable-textdlg"" >&5
no_cache=0
# Check whether --enable-textdlg or --disable-textdlg was given.
if test "${enable_textdlg+set}" = set; then
echo $ac_n "checking "for --enable-tipdlg"""... $ac_c" 1>&6
-echo "configure:5386: checking "for --enable-tipdlg"" >&5
+echo "configure:5394: checking "for --enable-tipdlg"" >&5
no_cache=0
# Check whether --enable-tipdlg or --disable-tipdlg was given.
if test "${enable_tipdlg+set}" = set; then
echo $ac_n "checking "for --enable-progressdlg"""... $ac_c" 1>&6
-echo "configure:5425: checking "for --enable-progressdlg"" >&5
+echo "configure:5433: checking "for --enable-progressdlg"" >&5
no_cache=0
# Check whether --enable-progressdlg or --disable-progressdlg was given.
if test "${enable_progressdlg+set}" = set; then
echo $ac_n "checking "for --enable-miniframe"""... $ac_c" 1>&6
-echo "configure:5464: checking "for --enable-miniframe"" >&5
+echo "configure:5472: checking "for --enable-miniframe"" >&5
no_cache=0
# Check whether --enable-miniframe or --disable-miniframe was given.
if test "${enable_miniframe+set}" = set; then
echo $ac_n "checking "for --enable-html"""... $ac_c" 1>&6
-echo "configure:5503: checking "for --enable-html"" >&5
+echo "configure:5511: checking "for --enable-html"" >&5
no_cache=0
# Check whether --enable-html or --disable-html was given.
if test "${enable_html+set}" = set; then
echo $ac_n "checking "for --enable-tooltips"""... $ac_c" 1>&6
-echo "configure:5542: checking "for --enable-tooltips"" >&5
+echo "configure:5550: checking "for --enable-tooltips"" >&5
no_cache=0
# Check whether --enable-tooltips or --disable-tooltips was given.
if test "${enable_tooltips+set}" = set; then
echo $ac_n "checking "for --enable-splines"""... $ac_c" 1>&6
-echo "configure:5581: checking "for --enable-splines"" >&5
+echo "configure:5589: checking "for --enable-splines"" >&5
no_cache=0
# Check whether --enable-splines or --disable-splines was given.
if test "${enable_splines+set}" = set; then
echo $ac_n "checking "for --enable-validators"""... $ac_c" 1>&6
-echo "configure:5620: checking "for --enable-validators"" >&5
+echo "configure:5628: checking "for --enable-validators"" >&5
no_cache=0
# Check whether --enable-validators or --disable-validators was given.
if test "${enable_validators+set}" = set; then
echo $ac_n "checking "for --enable-busyinfo"""... $ac_c" 1>&6
-echo "configure:5659: checking "for --enable-busyinfo"" >&5
+echo "configure:5667: checking "for --enable-busyinfo"" >&5
no_cache=0
# Check whether --enable-busyinfo or --disable-busyinfo was given.
if test "${enable_busyinfo+set}" = set; then
echo $ac_n "checking "for --enable-plot"""... $ac_c" 1>&6
-echo "configure:5698: checking "for --enable-plot"" >&5
+echo "configure:5706: checking "for --enable-plot"" >&5
no_cache=0
# Check whether --enable-plot or --disable-plot was given.
if test "${enable_plot+set}" = set; then
echo $ac_n "checking "for --enable-gif"""... $ac_c" 1>&6
-echo "configure:5739: checking "for --enable-gif"" >&5
+echo "configure:5747: checking "for --enable-gif"" >&5
no_cache=0
# Check whether --enable-gif or --disable-gif was given.
if test "${enable_gif+set}" = set; then
echo $ac_n "checking "for --enable-pcx"""... $ac_c" 1>&6
-echo "configure:5778: checking "for --enable-pcx"" >&5
+echo "configure:5786: checking "for --enable-pcx"" >&5
no_cache=0
# Check whether --enable-pcx or --disable-pcx was given.
if test "${enable_pcx+set}" = set; then
echo $ac_n "checking "for --enable-pnm"""... $ac_c" 1>&6
-echo "configure:5817: checking "for --enable-pnm"" >&5
+echo "configure:5825: checking "for --enable-pnm"" >&5
no_cache=0
# Check whether --enable-pnm or --disable-pnm was given.
if test "${enable_pnm+set}" = set; then
echo $ac_n "checking for toolkit""... $ac_c" 1>&6
-echo "configure:5864: checking for toolkit" >&5
+echo "configure:5872: checking for toolkit" >&5
if test "$wxUSE_GUI" = "yes"; then
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5998: checking for $ac_word" >&5
+echo "configure:6006: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6028: checking for $ac_word" >&5
+echo "configure:6036: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6079: checking for $ac_word" >&5
+echo "configure:6087: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:6111: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:6119: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 6122 "configure"
+#line 6130 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:6127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:6153: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:6161: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:6158: checking whether we are using GNU C" >&5
+echo "configure:6166: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:6167: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:6175: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:6186: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:6194: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:6221: checking how to run the C preprocessor" >&5
+echo "configure:6229: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 6236 "configure"
+#line 6244 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6250: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 6253 "configure"
+#line 6261 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6259: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6267: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 6270 "configure"
+#line 6278 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6276: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:6303: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:6311: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
-#line 6309 "configure"
+#line 6317 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
-#line 6327 "configure"
+#line 6335 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6363: checking for $ac_word" >&5
+echo "configure:6371: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:6395: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:6403: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 6406 "configure"
+#line 6414 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
-if { (eval echo configure:6411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:6437: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:6445: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:6442: checking whether we are using GNU C++" >&5
+echo "configure:6450: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:6451: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:6459: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:6470: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:6478: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:6503: checking how to run the C++ preprocessor" >&5
+echo "configure:6511: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 6516 "configure"
+#line 6524 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6521: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6529: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6559: checking for $ac_word" >&5
+echo "configure:6567: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6590: checking for $ac_word" >&5
+echo "configure:6598: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:6630: checking for a BSD compatible install" >&5
+echo "configure:6638: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6686: checking for $ac_word" >&5
+echo "configure:6694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking "make for VPATH support"""... $ac_c" 1>&6
-echo "configure:6715: checking "make for VPATH support"" >&5
+echo "configure:6723: checking "make for VPATH support"" >&5
cat - << EOF > confMake
check : file
cp \$? \$@
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6744: checking for $ac_word" >&5
+echo "configure:6752: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6778: checking for $ac_word" >&5
+echo "configure:6786: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:6812: checking for yywrap in -l$ac_lib" >&5
+echo "configure:6820: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6820 "configure"
+#line 6828 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:6831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:6855: checking whether ln -s works" >&5
+echo "configure:6863: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "configure: warning: Cross compiling --- skipping windows.h check" 1>&2
else
echo $ac_n "checking for Windows headers""... $ac_c" 1>&6
-echo "configure:7022: checking for Windows headers" >&5
+echo "configure:7030: checking for Windows headers" >&5
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7077: checking for $ac_word" >&5
+echo "configure:7085: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.3
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:7112: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:7120: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" != "no" ; then
GTK_CFLAGS=`$GTK_CONFIG --cflags`
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 7125 "configure"
+#line 7133 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:7157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
GUIDIST=GTK_DIST
echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
-echo "configure:7218: checking for gdk_im_open in -lgdk" >&5
+echo "configure:7226: checking for gdk_im_open in -lgdk" >&5
ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgdk $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7226 "configure"
+#line 7234 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gdk_im_open()
; return 0; }
EOF
-if { (eval echo configure:7237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_WINE" = 1; then
echo $ac_n "checking for WINE includes""... $ac_c" 1>&6
-echo "configure:7264: checking for WINE includes" >&5
+echo "configure:7272: checking for WINE includes" >&5
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
XPM_LINK=""
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:7285: checking for Xpm library" >&5
+echo "configure:7293: checking for Xpm library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
MESA_LINK=""
echo $ac_n "checking for Mesa library""... $ac_c" 1>&6
-echo "configure:7313: checking for Mesa library" >&5
+echo "configure:7321: checking for Mesa library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:7357: checking for X" >&5
+echo "configure:7365: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 7419 "configure"
+#line 7427 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7424: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7432: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7493 "configure"
+#line 7501 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:7500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:7606: checking whether -R must be followed by a space" >&5
+echo "configure:7614: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 7609 "configure"
+#line 7617 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:7616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 7632 "configure"
+#line 7640 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:7639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7647: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:7671: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:7679: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7679 "configure"
+#line 7687 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:7690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:7712: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:7720: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7720 "configure"
+#line 7728 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:7731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7739: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:7760: checking for gethostbyname" >&5
+echo "configure:7768: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7765 "configure"
+#line 7773 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char gethostbyname();
-char (*f)();
int main() {
#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
choke me
#else
-f = gethostbyname;
+gethostbyname();
#endif
; return 0; }
EOF
-if { (eval echo configure:7789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:7810: checking for gethostbyname in -lnsl" >&5
+echo "configure:7817: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7818 "configure"
+#line 7825 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:7829: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:7859: checking for connect" >&5
+echo "configure:7866: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7864 "configure"
+#line 7871 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char connect();
-char (*f)();
int main() {
#if defined (__stub_connect) || defined (__stub___connect)
choke me
#else
-f = connect;
+connect();
#endif
; return 0; }
EOF
-if { (eval echo configure:7888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7894: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:7909: checking for connect in -lsocket" >&5
+echo "configure:7915: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7917 "configure"
+#line 7923 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:7928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:7952: checking for remove" >&5
+echo "configure:7958: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7957 "configure"
+#line 7963 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char remove();
-char (*f)();
int main() {
#if defined (__stub_remove) || defined (__stub___remove)
choke me
#else
-f = remove;
+remove();
#endif
; return 0; }
EOF
-if { (eval echo configure:7981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:8002: checking for remove in -lposix" >&5
+echo "configure:8007: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8010 "configure"
+#line 8015 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:8021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:8045: checking for shmat" >&5
+echo "configure:8050: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8050 "configure"
+#line 8055 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shmat();
-char (*f)();
int main() {
#if defined (__stub_shmat) || defined (__stub___shmat)
choke me
#else
-f = shmat;
+shmat();
#endif
; return 0; }
EOF
-if { (eval echo configure:8074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:8095: checking for shmat in -lipc" >&5
+echo "configure:8099: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8103 "configure"
+#line 8107 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:8114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:8147: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:8151: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8155 "configure"
+#line 8159 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:8166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
COMPILED_X_PROGRAM=0
echo $ac_n "checking for Motif/Lesstif headers""... $ac_c" 1>&6
-echo "configure:8204: checking for Motif/Lesstif headers" >&5
+echo "configure:8208: checking for Motif/Lesstif headers" >&5
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
echo "$ac_t""found $ac_find_includes" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8219 "configure"
+#line 8223 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:8232: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8236: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""found in default search path" 1>&6
if test "$COMPILED_X_PROGRAM" = 0; then
echo $ac_n "checking for Motif/Lesstif library""... $ac_c" 1>&6
-echo "configure:8253: checking for Motif/Lesstif library" >&5
+echo "configure:8257: checking for Motif/Lesstif library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
echo "$ac_t""found at $ac_find_libraries" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8292 "configure"
+#line 8296 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:8305: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""found in default search path" 1>&6
XPM_LINK=""
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:8328: checking for Xpm library" >&5
+echo "configure:8332: checking for Xpm library" >&5
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
echo "$ac_t""found at $ac_find_libraries" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8360 "configure"
+#line 8364 "configure"
#include "confdefs.h"
#include <X11/xpm.h>
; return 0; }
EOF
-if { (eval echo configure:8373: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8377: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
XPM_LINK="-lXpm "
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8646: checking for $ac_hdr" >&5
+echo "configure:8650: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8651 "configure"
+#line 8655 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8656: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8660: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8686: checking for $ac_hdr" >&5
+echo "configure:8690: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8691 "configure"
+#line 8695 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8700: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8726: checking for $ac_hdr" >&5
+echo "configure:8730: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8731 "configure"
+#line 8735 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8736: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8766: checking for $ac_hdr" >&5
+echo "configure:8770: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8771 "configure"
+#line 8775 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8780: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8806: checking for $ac_hdr" >&5
+echo "configure:8810: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8811 "configure"
+#line 8815 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8816: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8820: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8848: checking for $ac_hdr" >&5
+echo "configure:8852: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8853 "configure"
+#line 8857 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8858: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8862: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:8888: checking for ANSI C header files" >&5
+echo "configure:8892: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8893 "configure"
+#line 8897 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8901: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8905: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 8918 "configure"
+#line 8922 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 8936 "configure"
+#line 8940 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 8957 "configure"
+#line 8961 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:8968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:8992: checking for mode_t" >&5
+echo "configure:8996: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8997 "configure"
+#line 9001 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:9025: checking for off_t" >&5
+echo "configure:9029: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9030 "configure"
+#line 9034 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:9058: checking for pid_t" >&5
+echo "configure:9062: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9063 "configure"
+#line 9067 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:9091: checking for size_t" >&5
+echo "configure:9095: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9096 "configure"
+#line 9100 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:9124: checking for uid_t in sys/types.h" >&5
+echo "configure:9128: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9129 "configure"
+#line 9133 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
echo $ac_n "checking for pw_gecos in struct passwd""... $ac_c" 1>&6
-echo "configure:9160: checking for pw_gecos in struct passwd" >&5
+echo "configure:9164: checking for pw_gecos in struct passwd" >&5
if eval "test \"`echo '$''{'wx_cv_struct_pw_gecos'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9166 "configure"
+#line 9170 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:9177: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9181: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_pw_gecos=yes
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:9204: checking for working const" >&5
+echo "configure:9208: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9209 "configure"
+#line 9213 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:9258: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9262: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:9279: checking for inline" >&5
+echo "configure:9283: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 9286 "configure"
+#line 9290 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:9293: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9297: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:9320: checking size of char" >&5
+echo "configure:9324: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_char=1
else
cat > conftest.$ac_ext <<EOF
-#line 9328 "configure"
+#line 9332 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_char=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:9359: checking size of short" >&5
+echo "configure:9363: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_short=2
else
cat > conftest.$ac_ext <<EOF
-#line 9367 "configure"
+#line 9371 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of int *""... $ac_c" 1>&6
-echo "configure:9398: checking size of int *" >&5
+echo "configure:9402: checking size of int *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int_p=4
else
cat > conftest.$ac_ext <<EOF
-#line 9406 "configure"
+#line 9410 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9417: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int_p=`cat conftestval`
else
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:9437: checking size of int" >&5
+echo "configure:9441: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int=4
else
cat > conftest.$ac_ext <<EOF
-#line 9445 "configure"
+#line 9449 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:9476: checking size of long" >&5
+echo "configure:9480: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 9484 "configure"
+#line 9488 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:9515: checking size of long long" >&5
+echo "configure:9519: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=0
else
cat > conftest.$ac_ext <<EOF
-#line 9523 "configure"
+#line 9527 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:9534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:9555: checking whether byte ordering is bigendian" >&5
+echo "configure:9559: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 9562 "configure"
+#line 9566 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:9573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9577: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 9577 "configure"
+#line 9581 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:9588: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9592: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
ac_cv_c_bigendian=unknown
else
cat > conftest.$ac_ext <<EOF
-#line 9608 "configure"
+#line 9612 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:9621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9668: checking for $ac_hdr" >&5
+echo "configure:9672: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9673 "configure"
+#line 9677 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9682: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if C++ compiler supports bool""... $ac_c" 1>&6
-echo "configure:9726: checking if C++ compiler supports bool" >&5
+echo "configure:9730: checking if C++ compiler supports bool" >&5
if eval "test \"`echo '$''{'wx_cv_cpp_bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9741 "configure"
+#line 9745 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:9753: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
echo $ac_n "checking if you need GNU extensions""... $ac_c" 1>&6
-echo "configure:9795: checking if you need GNU extensions" >&5
+echo "configure:9799: checking if you need GNU extensions" >&5
if eval "test \"`echo '$''{'wx_cv_gnu_extensions'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9801 "configure"
+#line 9805 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:9814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9818: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_gnu_extensions=yes
else
echo $ac_n "checking for wcslen in -lc""... $ac_c" 1>&6
-echo "configure:9839: checking for wcslen in -lc" >&5
+echo "configure:9843: checking for wcslen in -lc" >&5
ac_lib_var=`echo c'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9847 "configure"
+#line 9851 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:9858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for wcslen in -lw""... $ac_c" 1>&6
-echo "configure:9884: checking for wcslen in -lw" >&5
+echo "configure:9888: checking for wcslen in -lw" >&5
ac_lib_var=`echo w'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lw $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9892 "configure"
+#line 9896 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:9903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:9934: checking for vprintf" >&5
+echo "configure:9938: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9939 "configure"
+#line 9943 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char vprintf();
-char (*f)();
int main() {
#if defined (__stub_vprintf) || defined (__stub___vprintf)
choke me
#else
-f = vprintf;
+vprintf();
#endif
; return 0; }
EOF
-if { (eval echo configure:9963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:9987: checking for _doprnt" >&5
+echo "configure:9990: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9992 "configure"
+#line 9995 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char _doprnt();
-char (*f)();
int main() {
#if defined (__stub__doprnt) || defined (__stub____doprnt)
choke me
#else
-f = _doprnt;
+_doprnt();
#endif
; return 0; }
EOF
-if { (eval echo configure:10016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
for ac_func in vsnprintf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10044: checking for $ac_func" >&5
+echo "configure:10046: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10049 "configure"
+#line 10051 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for vsscanf""... $ac_c" 1>&6
-echo "configure:10113: checking for vsscanf" >&5
+echo "configure:10114: checking for vsscanf" >&5
if eval "test \"`echo '$''{'wx_cv_func_vsscanf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
else
cat > conftest.$ac_ext <<EOF
-#line 10123 "configure"
+#line 10124 "configure"
#include "confdefs.h"
#ifdef __cplusplus
extern "C" void exit(int);
}
EOF
-if { (eval echo configure:10150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
for ac_func in vfork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10186: checking for $ac_func" >&5
+echo "configure:10187: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10191 "configure"
+#line 10192 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10271: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in nanosleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10311: checking for $ac_func" >&5
+echo "configure:10310: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10316 "configure"
+#line 10315 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10340: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6
-echo "configure:10365: checking for nanosleep in -lposix4" >&5
+echo "configure:10363: checking for nanosleep in -lposix4" >&5
ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10373 "configure"
+#line 10371 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
nanosleep()
; return 0; }
EOF
-if { (eval echo configure:10384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in usleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10412: checking for $ac_func" >&5
+echo "configure:10410: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10417 "configure"
+#line 10415 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in uname gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10480: checking for $ac_func" >&5
+echo "configure:10477: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10485 "configure"
+#line 10482 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strtok_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10537: checking for $ac_func" >&5
+echo "configure:10533: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10542 "configure"
+#line 10538 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10595: checking for $ac_func" >&5
+echo "configure:10590: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10600 "configure"
+#line 10595 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
-echo "configure:10649: checking for inet_addr in -lnsl" >&5
+echo "configure:10643: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10657 "configure"
+#line 10651 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:10668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lresolv""... $ac_c" 1>&6
-echo "configure:10687: checking for inet_addr in -lresolv" >&5
+echo "configure:10681: checking for inet_addr in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10695 "configure"
+#line 10689 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:10706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in inet_aton
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10739: checking for $ac_func" >&5
+echo "configure:10733: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10744 "configure"
+#line 10738 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:10768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10761: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_aton in -l$INET_LINK""... $ac_c" 1>&6
-echo "configure:10793: checking for inet_aton in -l$INET_LINK" >&5
+echo "configure:10786: checking for inet_aton in -l$INET_LINK" >&5
ac_lib_var=`echo $INET_LINK'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$INET_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10801 "configure"
+#line 10794 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:10812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_THREADS" = "yes" ; then
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:10919: checking for pthread_create in -lpthread" >&5
+echo "configure:10912: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10927 "configure"
+#line 10920 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:10938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:10961: checking for pthread_create in -lc_r" >&5
+echo "configure:10954: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 10969 "configure"
+#line 10962 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:10980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
ac_safe=`echo "sys/prctl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/prctl.h""... $ac_c" 1>&6
-echo "configure:11004: checking for sys/prctl.h" >&5
+echo "configure:10997: checking for sys/prctl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11009 "configure"
+#line 11002 "configure"
#include "confdefs.h"
#include <sys/prctl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11014: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in thr_setconcurrency
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:11054: checking for $ac_func" >&5
+echo "configure:11047: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11059 "configure"
+#line 11052 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:11083: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:11113: checking for $ac_hdr" >&5
+echo "configure:11105: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11118 "configure"
+#line 11110 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11123: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for sched_yield in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:11151: checking for sched_yield in -l$THREADS_LINK" >&5
+echo "configure:11143: checking for sched_yield in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11159 "configure"
+#line 11151 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:11170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11162: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -l"posix4"""... $ac_c" 1>&6
-echo "configure:11192: checking for sched_yield in -l"posix4"" >&5
+echo "configure:11184: checking for sched_yield in -l"posix4"" >&5
ac_lib_var=`echo "posix4"'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l"posix4" $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11200 "configure"
+#line 11192 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:11211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for pthread_attr_getschedpolicy in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:11241: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5
+echo "configure:11233: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11249 "configure"
+#line 11241 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_attr_getschedpolicy()
; return 0; }
EOF
-if { (eval echo configure:11260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_attr_getschedpolicy in -l"posix4"""... $ac_c" 1>&6
-echo "configure:11282: checking for pthread_attr_getschedpolicy in -l"posix4"" >&5
+echo "configure:11274: checking for pthread_attr_getschedpolicy in -l"posix4"" >&5
ac_lib_var=`echo "posix4"'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l"posix4" $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11290 "configure"
+#line 11282 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_attr_getschedpolicy()
; return 0; }
EOF
-if { (eval echo configure:11301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11293: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for pthread_cancel in -l$THREADS_LINK""... $ac_c" 1>&6
-echo "configure:11331: checking for pthread_cancel in -l$THREADS_LINK" >&5
+echo "configure:11323: checking for pthread_cancel in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_cancel | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11339 "configure"
+#line 11331 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_cancel()
; return 0; }
EOF
-if { (eval echo configure:11350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for pthread_cleanup_push/pop""... $ac_c" 1>&6
-echo "configure:11376: checking for pthread_cleanup_push/pop" >&5
+echo "configure:11368: checking for pthread_cleanup_push/pop" >&5
if eval "test \"`echo '$''{'wx_cv_func_pthread_cleanup_push'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11382 "configure"
+#line 11374 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:11392: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11384: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_pthread_cleanup_push=yes
else
if test "$ac_cv_func_strtok_r" = "yes"; then
echo $ac_n "checking if -D_REENTRANT is needed""... $ac_c" 1>&6
-echo "configure:11433: checking if -D_REENTRANT is needed" >&5
+echo "configure:11425: checking if -D_REENTRANT is needed" >&5
if test "$NEEDS_D_REENTRANT_FOR_R_FUNCS" = 1; then
CFLAGS="${CFLAGS} -D_REENTRANT"
CXXFLAGS="${CXXFLAGS} -D_REENTRANT"
ZLIB_LINK=
ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for zlib.h""... $ac_c" 1>&6
-echo "configure:11564: checking for zlib.h" >&5
+echo "configure:11556: checking for zlib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11569 "configure"
+#line 11561 "configure"
#include "confdefs.h"
#include <zlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11574: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11566: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:11591: checking for deflate in -lz" >&5
+echo "configure:11583: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11599 "configure"
+#line 11591 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:11610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
PNG_LINK=
ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for png.h""... $ac_c" 1>&6
-echo "configure:11657: checking for png.h" >&5
+echo "configure:11649: checking for png.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11662 "configure"
+#line 11654 "configure"
#include "confdefs.h"
#include <png.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11667: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11659: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6
-echo "configure:11684: checking for png_check_sig in -lpng" >&5
+echo "configure:11676: checking for png_check_sig in -lpng" >&5
ac_lib_var=`echo png'_'png_check_sig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpng -lz -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11692 "configure"
+#line 11684 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
png_check_sig()
; return 0; }
EOF
-if { (eval echo configure:11703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if test "x$PNG_LINK" = "x" ; then
- { echo "configure: error: system png library not found! Use --with-png=yes to use built-in libpng" 1>&2; exit 1; }
+ { echo "configure: error: system png library not found! Use --with-libpng=yes to use the built-in libpng" 1>&2; exit 1; }
fi
fi
JPEG_LINK=
ac_safe=`echo "jpeglib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
-echo "configure:11748: checking for jpeglib.h" >&5
+echo "configure:11740: checking for jpeglib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11753 "configure"
+#line 11745 "configure"
#include "confdefs.h"
#include <jpeglib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6
-echo "configure:11775: checking for jpeg_read_header in -ljpeg" >&5
+echo "configure:11767: checking for jpeg_read_header in -ljpeg" >&5
ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ljpeg $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11783 "configure"
+#line 11775 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jpeg_read_header()
; return 0; }
EOF
-if { (eval echo configure:11794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if test "x$JPEG_LINK" = "x" ; then
- { echo "configure: error: system jpeg library not found! Use --with-jpeg=yes to use built-in one" 1>&2; exit 1; }
+ { echo "configure: error: system jpeg library not found! Use --with-libjpeg=yes to use the built-in one" 1>&2; exit 1; }
fi
fi
fi
TIFF_INCLUDE=
-if test "$wxUSE_LIBTIFF" = "yes" ; then
+if test "$wxUSE_LIBTIFF" = "yes" -o "$wxUSE_LIBTIFF" = "sys" ; then
cat >> confdefs.h <<\EOF
#define wxUSE_LIBTIFF 1
EOF
- TIFF_INCLUDE="-I\${top_srcdir}/src/tiff"
+ if test "$wxUSE_LIBTIFF" = "yes" ; then
+ TIFF_INCLUDE="-I\${top_srcdir}/src/tiff"
+ else
+ TIFF_LINK=
+ ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
+echo "configure:11828: checking for tiffio.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 11833 "configure"
+#include "confdefs.h"
+#include <tiffio.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:11838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6
+echo "configure:11855: checking for TIFFError in -ltiff" >&5
+ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ltiff -lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 11863 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char TIFFError();
+
+int main() {
+TIFFError()
+; return 0; }
+EOF
+if { (eval echo configure:11874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ TIFF_LINK="-ltiff"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test "x$TIFF_LINK" = "x" ; then
+ { echo "configure: error: system tiff library not found! Use --with-libtiff=yes to use the built-in one" 1>&2; exit 1; }
+ fi
+ fi
fi
if test "$wxUSE_OPENGL" = "yes"; then
ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6
-echo "configure:11836: checking for GL/gl.h" >&5
+echo "configure:11907: checking for GL/gl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11841 "configure"
+#line 11912 "configure"
#include "confdefs.h"
#include <GL/gl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11917: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
EOF
echo $ac_n "checking for glFlush in -lGL""... $ac_c" 1>&6
-echo "configure:11872: checking for glFlush in -lGL" >&5
+echo "configure:11943: checking for glFlush in -lGL" >&5
ac_lib_var=`echo GL'_'glFlush | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lGL $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11880 "configure"
+#line 11951 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
glFlush()
; return 0; }
EOF
-if { (eval echo configure:11891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for glFlush in -lMesaGL""... $ac_c" 1>&6
-echo "configure:11913: checking for glFlush in -lMesaGL" >&5
+echo "configure:11984: checking for glFlush in -lMesaGL" >&5
ac_lib_var=`echo MesaGL'_'glFlush | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lMesaGL $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11921 "configure"
+#line 11992 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
glFlush()
; return 0; }
EOF
-if { (eval echo configure:11932: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in strptime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12127: checking for $ac_func" >&5
+echo "configure:12198: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12132 "configure"
+#line 12203 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:12156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for timezone variable in <time.h>""... $ac_c" 1>&6
-echo "configure:12182: checking for timezone variable in <time.h>" >&5
+echo "configure:12252: checking for timezone variable in <time.h>" >&5
if eval "test \"`echo '$''{'wx_cv_var_timezone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12188 "configure"
+#line 12258 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12200: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12270: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=__timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12211 "configure"
+#line 12281 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12223: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12293: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=_timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12234 "configure"
+#line 12304 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12246: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12316: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=timezone
for ac_func in localtime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12281: checking for $ac_func" >&5
+echo "configure:12351: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12286 "configure"
+#line 12356 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:12310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_localtime" = "yes"; then
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:12337: checking for tm_gmtoff in struct tm" >&5
+echo "configure:12406: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'wx_cv_struct_tm_has_gmtoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12343 "configure"
+#line 12412 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:12355: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_tm_has_gmtoff=yes
for ac_func in gettimeofday ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12381: checking for $ac_func" >&5
+echo "configure:12450: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12386 "configure"
+#line 12455 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:12410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_gettimeofday" = "yes"; then
echo $ac_n "checking whether gettimeofday takes two arguments""... $ac_c" 1>&6
-echo "configure:12437: checking whether gettimeofday takes two arguments" >&5
+echo "configure:12505: checking whether gettimeofday takes two arguments" >&5
if eval "test \"`echo '$''{'wx_cv_func_gettimeofday_has_2_args'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12452 "configure"
+#line 12520 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:12466: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12534: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=yes
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12474 "configure"
+#line 12542 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:12487: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12555: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=no
else
if test "$wxUSE_SOCKETS" = "yes"; then
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:12533: checking for socket" >&5
+echo "configure:12601: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12538 "configure"
+#line 12606 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char socket();
-char (*f)();
int main() {
#if defined (__stub_socket) || defined (__stub___socket)
choke me
#else
-f = socket;
+socket();
#endif
; return 0; }
EOF
-if { (eval echo configure:12562: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:12580: checking for socket in -lsocket" >&5
+echo "configure:12647: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12588 "configure"
+#line 12655 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:12599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_SOCKETS" = "yes" ; then
echo $ac_n "checking what is the type of the third argument of getsockname""... $ac_c" 1>&6
-echo "configure:12633: checking what is the type of the third argument of getsockname" >&5
+echo "configure:12700: checking what is the type of the third argument of getsockname" >&5
if eval "test \"`echo '$''{'wx_cv_type_getsockname3'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12648 "configure"
+#line 12715 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:12661: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12728: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=socklen_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12669 "configure"
+#line 12736 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:12682: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12749: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=size_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 12690 "configure"
+#line 12757 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:12703: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12770: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=int
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:12761: checking for $ac_hdr" >&5
+echo "configure:12828: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12766 "configure"
+#line 12833 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12771: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12822: checking for $ac_func" >&5
+echo "configure:12889: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12827 "configure"
+#line 12894 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:12851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:12879: checking for dlopen in -ldl" >&5
+echo "configure:12945: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12887 "configure"
+#line 12953 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:12898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in shl_load
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:12927: checking for $ac_func" >&5
+echo "configure:12993: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 12932 "configure"
+#line 12998 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:12956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:13187: checking for $ac_hdr" >&5
+echo "configure:13252: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13192 "configure"
+#line 13257 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13262: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
EXTRA_LIBS="$LIBS $ZLIB_LINK $POSIX4_LINK $INET_LINK $WCHAR_LINK $THREADS_LINK $DMALLOC_LINK $DL_LINK"
if test "$wxUSE_GUI" = "yes"; then
- EXTRA_LIBS="$EXTRA_LIBS $GUILIBS $PNG_LINK $JPEG_LINK"
+ EXTRA_LIBS="$EXTRA_LIBS $GUILIBS $PNG_LINK $JPEG_LINK $TIFF_LINK"
fi
LD_LIBS="\${top_builddir}/lib/${WX_LIBRARY_NAME_STATIC} $EXTRA_LIBS"
-INCLUDES="-I. -I\${top_builddir}/include -I\${top_srcdir}/include $ZLIB_INCLUDE $PNG_INCLUDE $JPEG_INCLUDE $TIFF_INCLUDE $TOOLKIT_INCLUDE"
+INCLUDES="-I. -I\${top_builddir}/include -I\${top_srcdir}/include -I\${top_srcdir}/contrib/include $ZLIB_INCLUDE $PNG_INCLUDE $JPEG_INCLUDE $TIFF_INCLUDE $TOOLKIT_INCLUDE"
if test "$GXX" = yes ; then
CXXWARNINGS="-Wall"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:13730: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:13795: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
if test "$wxUSE_GUI" = "yes"; then
wx_cv_path_samplesubdirs=$SAMPLES_SUBDIRS
- subdirs="demos samples utils"
+ wx_cv_path_ifs=$PATH_IFS
+ wx_cv_program_ext=$PROGRAM_EXT
+ wx_cv_target_library=$WX_TARGET_LIBRARY
+ subdirs="demos samples utils contrib"
fi
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.14"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
esac
done
- for ac_config_dir in demos samples utils; do
+ for ac_config_dir in demos samples utils contrib; do
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
projects / wxWidgets.git / blobdiff