#include "wx/process.h"
#include "wx/thread.h"
-#include "wx/stream.h"
+#include "wx/wfstream.h"
#ifdef HAVE_STATFS
- #include <sys/vfs.h>
+# ifdef __BSD__
+# include <sys/param.h>
+# include <sys/mount.h>
+# else
+# include <sys/vfs.h>
+# endif
#endif // HAVE_STATFS
+// not only the statfs syscall is called differently depending on platform, but
+// we also can't use "struct statvfs" under Solaris because it breaks down if
+// HAVE_LARGEFILE_SUPPORT == 1 and we must use statvfs_t instead
+#ifdef HAVE_STATVFS
+ #include <sys/statvfs.h>
+
+ #define statfs statvfs
+ #define wxStatFs statvfs_t
+#elif HAVE_STATFS
+ #define wxStatFs struct statfs
+#endif // HAVE_STAT[V]FS
+
#if wxUSE_GUI
#include "wx/unix/execute.h"
#endif
int err = kill((pid_t)pid, (int)sig);
if ( rc )
{
- switch ( err )
+ switch ( errno )
{
case 0:
*rc = wxKILL_OK;
#define WXEXECUTE_NARGS 127
-long wxExecute( const wxString& command, bool sync, wxProcess *process )
+long wxExecute( const wxString& command, int flags, wxProcess *process )
{
wxCHECK_MSG( !command.IsEmpty(), 0, wxT("can't exec empty command") );
argv[argc] = NULL;
// do execute the command
- long lRc = wxExecute(argv, sync, process);
+#if wxUSE_UNICODE
+ long lRc = -1;
+#else
+ long lRc = wxExecute(argv, flags, process);
+#endif
// clean up
argc = 0;
bool wxShell(const wxString& command)
{
- return wxExecute(wxMakeShellCommand(command), TRUE /* sync */) == 0;
+ return wxExecute(wxMakeShellCommand(command), wxEXEC_SYNC) == 0;
}
bool wxShell(const wxString& command, wxArrayString& output)
return wxExecute(wxMakeShellCommand(command), output);
}
-#if wxUSE_GUI
-
-void wxHandleProcessTermination(wxEndProcessData *proc_data)
+// Shutdown or reboot the PC
+bool wxShutdown(wxShutdownFlags wFlags)
{
- int pid = (proc_data->pid > 0) ? proc_data->pid : -(proc_data->pid);
+ wxChar level;
+ switch ( wFlags )
+ {
+ case wxSHUTDOWN_POWEROFF:
+ level = _T('0');
+ break;
- // waitpid is POSIX so should be available everywhere, however on older
- // systems wait() might be used instead in a loop (until the right pid
- // terminates)
- int status = 0;
- int rc;
+ case wxSHUTDOWN_REBOOT:
+ level = _T('6');
+ break;
- // wait for child termination and if waitpid() was interrupted, try again
- do
- {
- rc = waitpid(pid, &status, 0);
+ default:
+ wxFAIL_MSG( _T("unknown wxShutdown() flag") );
+ return FALSE;
}
- while ( rc == -1 && errno == EINTR );
- if (rc == -1)
- {
- // JACS: this could happen if the process was terminated and waitpid called,
- // so commenting out for now.
- //wxLogSysError(_("Waiting for subprocess termination failed (return code = -1)"));
- }
- else if (! (WIFEXITED(status)))
+ return system(wxString::Format(_T("init %c"), level).mb_str()) == 0;
+}
+
+
+#if wxUSE_GUI
+
+void wxHandleProcessTermination(wxEndProcessData *proc_data)
+{
+ // notify user about termination if required
+ if ( proc_data->process )
{
- wxLogSysError(_("Waiting for subprocess termination failed (WIFEXITED returned zero)"));
-
- /* AFAIK, this can only happen if something went wrong within
- wxGTK, i.e. due to a race condition or some serious bug.
- After having fixed the order of statements in
- GTK_EndProcessDetector(). (KB)
- */
+ proc_data->process->OnTerminate(proc_data->pid, proc_data->exitcode);
}
- else if (WIFSIGNALED(status))
+
+ // clean up
+ if ( proc_data->pid > 0 )
{
- wxLogSysError(_("Waiting for subprocess termination failed (signal not caught)"));
-
- /* AFAIK, this can only happen if something went wrong within
- wxGTK, i.e. due to a race condition or some serious bug.
- After having fixed the order of statements in
- GTK_EndProcessDetector(). (KB)
- */
+ delete proc_data;
}
- // else
+ else
{
- // notify user about termination if required
- if (proc_data->process)
- {
- proc_data->process->OnTerminate(proc_data->pid,
- WEXITSTATUS(status));
- }
- // clean up
- if ( proc_data->pid > 0 )
- {
- delete proc_data;
- }
- else
- {
- // wxExecute() will know about it
- proc_data->exitcode = status;
-
- proc_data->pid = 0;
- }
+ // let wxExecute() know that the process has terminated
+ proc_data->pid = 0;
}
}
#if wxUSE_STREAMS
-class wxProcessFileInputStream : public wxInputStream
-{
-public:
- wxProcessFileInputStream(int fd) { m_fd = fd; }
- ~wxProcessFileInputStream() { close(m_fd); }
-
- virtual bool Eof() const;
-
-protected:
- size_t OnSysRead(void *buffer, size_t bufsize);
-
-protected:
- int m_fd;
-};
+// ----------------------------------------------------------------------------
+// wxProcessFileInputStream: stream for reading from a pipe
+// ----------------------------------------------------------------------------
-class wxProcessFileOutputStream : public wxOutputStream
+class wxProcessFileInputStream : public wxFileInputStream
{
public:
- wxProcessFileOutputStream(int fd) { m_fd = fd; }
- ~wxProcessFileOutputStream() { close(m_fd); }
+ wxProcessFileInputStream(int fd) : wxFileInputStream(fd) { }
-protected:
- size_t OnSysWrite(const void *buffer, size_t bufsize);
-
-protected:
- int m_fd;
+ // return TRUE if we have anything to read, don't block
+ bool IsAvailable() const;
};
-bool wxProcessFileInputStream::Eof() const
+bool wxProcessFileInputStream::IsAvailable() const
{
if ( m_lasterror == wxSTREAM_EOF )
return TRUE;
tv.tv_sec = 0;
tv.tv_usec = 0;
+ const int fd = m_file->fd();
+
fd_set readfds;
FD_ZERO(&readfds);
- FD_SET(m_fd, &readfds);
- switch ( select(m_fd + 1, &readfds, NULL, NULL, &tv) )
+ FD_SET(fd, &readfds);
+ switch ( select(fd + 1, &readfds, NULL, NULL, &tv) )
{
case -1:
wxLogSysError(_("Impossible to get child process input"));
// still fall through
case 1:
- // input available: check if there is any
- return wxInputStream::Eof();
+ // input available
+ return TRUE;
}
}
-size_t wxProcessFileInputStream::OnSysRead(void *buffer, size_t bufsize)
+// ----------------------------------------------------------------------------
+// wxStreamTempInputBuffer
+// ----------------------------------------------------------------------------
+
+/*
+ Extract of a mail to wx-users to give the context of the problem we are
+ trying to solve here:
+
+ MC> If I run the command:
+ MC> find . -name "*.h" -exec grep linux {} \;
+ MC> in the exec sample synchronously from the 'Capture command output'
+ MC> menu, wxExecute never returns. I have to xkill it. Has anyone
+ MC> else encountered this?
+
+ Yes, I can reproduce it too.
+
+ I even think I understand why it happens: before launching the external
+ command we set up a pipe with a valid file descriptor on the reading side
+ when the output is redirected. So the subprocess happily writes to it ...
+ until the pipe buffer (which is usually quite big on Unix, I think the
+ default is 4Kb) is full. Then the writing process stops and waits until we
+ read some data from the pipe to be able to continue writing to it but we
+ never do it because we wait until it terminates to start reading and so we
+ have a classical deadlock.
+
+ Here is the fix: we now read the output as soon as it appears into a temp
+ buffer (wxStreamTempInputBuffer object) and later just stuff it back into the
+ stream when the process terminates. See supporting code in wxExecute()
+ itself as well.
+
+ Note that this is horribly inefficient for large amounts of output (count
+ the number of times we copy the data around) and so a better API is badly
+ needed!
+*/
+
+class wxStreamTempInputBuffer
{
- int ret = read(m_fd, buffer, bufsize);
- if ( ret == 0 )
+public:
+ wxStreamTempInputBuffer();
+
+ // call to associate a stream with this buffer, otherwise nothing happens
+ // at all
+ void Init(wxProcessFileInputStream *stream);
+
+ // check for input on our stream and cache it in our buffer if any
+ void Update();
+
+ ~wxStreamTempInputBuffer();
+
+private:
+ // the stream we're buffering, if NULL we don't do anything at all
+ wxProcessFileInputStream *m_stream;
+
+ // the buffer of size m_size (NULL if m_size == 0)
+ void *m_buffer;
+
+ // the size of the buffer
+ size_t m_size;
+};
+
+wxStreamTempInputBuffer::wxStreamTempInputBuffer()
+{
+ m_stream = NULL;
+ m_buffer = NULL;
+ m_size = 0;
+}
+
+void wxStreamTempInputBuffer::Init(wxProcessFileInputStream *stream)
+{
+ m_stream = stream;
+}
+
+void wxStreamTempInputBuffer::Update()
+{
+ if ( m_stream && m_stream->IsAvailable() )
{
- m_lasterror = wxSTREAM_EOF;
+ // realloc in blocks of 4Kb: this is the default (and minimal) buffer
+ // size of the Unix pipes so it should be the optimal step
+ static const size_t incSize = 4096;
+
+ void *buf = realloc(m_buffer, m_size + incSize);
+ if ( !buf )
+ {
+ // don't read any more, we don't have enough memory to do it
+ m_stream = NULL;
+ }
+ else // got memory for the buffer
+ {
+ m_buffer = buf;
+ m_stream->Read((char *)m_buffer + m_size, incSize);
+ m_size += m_stream->LastRead();
+ }
}
- else if ( ret == -1 )
+}
+
+wxStreamTempInputBuffer::~wxStreamTempInputBuffer()
+{
+ if ( m_buffer )
{
- m_lasterror = wxSTREAM_READ_ERROR;
- ret = 0;
+ m_stream->Ungetch(m_buffer, m_size);
+ free(m_buffer);
}
- else
+}
+
+#endif // wxUSE_STREAMS
+
+// ----------------------------------------------------------------------------
+// wxPipe: this encapsulates pipe() system call
+// ----------------------------------------------------------------------------
+
+class wxPipe
+{
+public:
+ // the symbolic names for the pipe ends
+ enum Direction
+ {
+ Read,
+ Write
+ };
+
+ enum
{
- m_lasterror = wxSTREAM_NOERROR;
+ INVALID_FD = -1
+ };
+
+ // default ctor doesn't do anything
+ wxPipe() { m_fds[Read] = m_fds[Write] = INVALID_FD; }
+
+ // create the pipe, return TRUE if ok, FALSE on error
+ bool Create()
+ {
+ if ( pipe(m_fds) == -1 )
+ {
+ wxLogSysError(_("Pipe creation failed"));
+
+ return FALSE;
+ }
+
+ return TRUE;
}
- return ret;
-}
+ // return TRUE if we were created successfully
+ bool IsOk() const { return m_fds[Read] != INVALID_FD; }
-size_t wxProcessFileOutputStream::OnSysWrite(const void *buffer, size_t bufsize)
-{
- int ret = write(m_fd, buffer, bufsize);
- if ( ret == -1 )
+ // return the descriptor for one of the pipe ends
+ int operator[](Direction which) const
{
- m_lasterror = wxSTREAM_WRITE_ERROR;
- ret = 0;
+ wxASSERT_MSG( which >= 0 && (size_t)which < WXSIZEOF(m_fds),
+ _T("invalid pipe index") );
+
+ return m_fds[which];
}
- else
+
+ // detach a descriptor, meaning that the pipe dtor won't close it, and
+ // return it
+ int Detach(Direction which)
{
- m_lasterror = wxSTREAM_NOERROR;
+ wxASSERT_MSG( which >= 0 && (size_t)which < WXSIZEOF(m_fds),
+ _T("invalid pipe index") );
+
+ int fd = m_fds[which];
+ m_fds[which] = INVALID_FD;
+
+ return fd;
}
- return ret;
-}
+ // close the pipe descriptors
+ void Close()
+ {
+ for ( size_t n = 0; n < WXSIZEOF(m_fds); n++ )
+ {
+ if ( m_fds[n] != INVALID_FD )
+ close(m_fds[n]);
+ }
+ }
-#endif // wxUSE_STREAMS
+ // dtor closes the pipe descriptors
+ ~wxPipe() { Close(); }
+
+private:
+ int m_fds[2];
+};
+
+// ----------------------------------------------------------------------------
+// wxExecute: the real worker function
+// ----------------------------------------------------------------------------
+#ifdef __VMS
+#pragma message disable codeunreachable
+#endif
long wxExecute(wxChar **argv,
- bool sync,
+ int flags,
wxProcess *process)
{
// for the sync execution, we return -1 to indicate failure, but for async
//
// we define this as a macro, not a variable, to avoid compiler warnings
// about "ERROR_RETURN_CODE value may be clobbered by fork()"
- #define ERROR_RETURN_CODE ((sync) ? -1 : 0)
+ #define ERROR_RETURN_CODE ((flags & wxEXEC_SYNC) ? -1 : 0)
wxCHECK_MSG( *argv, ERROR_RETURN_CODE, wxT("can't exec empty command") );
#if wxUSE_GUI
// create pipes
- int end_proc_detect[2];
- if ( pipe(end_proc_detect) == -1 )
+ wxPipe pipeEndProcDetect;
+ if ( !pipeEndProcDetect.Create() )
{
- wxLogSysError( _("Pipe creation failed") );
wxLogError( _("Failed to execute '%s'\n"), *argv );
ARGS_CLEANUP;
#endif // wxUSE_GUI
// pipes for inter process communication
- int pipeIn[2], // stdin
- pipeOut[2], // stdout
- pipeErr[2]; // stderr
-
- pipeIn[0] = pipeIn[1] =
- pipeOut[0] = pipeOut[1] =
- pipeErr[0] = pipeErr[1] = -1;
+ wxPipe pipeIn, // stdin
+ pipeOut, // stdout
+ pipeErr; // stderr
if ( process && process->IsRedirected() )
{
- if ( pipe(pipeIn) == -1 || pipe(pipeOut) == -1 || pipe(pipeErr) == -1 )
+ if ( !pipeIn.Create() || !pipeOut.Create() || !pipeErr.Create() )
{
-#if wxUSE_GUI
- // free previously allocated resources
- close(end_proc_detect[0]);
- close(end_proc_detect[1]);
-#endif // wxUSE_GUI
-
- wxLogSysError( _("Pipe creation failed") );
wxLogError( _("Failed to execute '%s'\n"), *argv );
ARGS_CLEANUP;
if ( pid == -1 ) // error?
{
-#if wxUSE_GUI
- close(end_proc_detect[0]);
- close(end_proc_detect[1]);
- close(pipeIn[0]);
- close(pipeIn[1]);
- close(pipeOut[0]);
- close(pipeOut[1]);
- close(pipeErr[0]);
- close(pipeErr[1]);
-#endif // wxUSE_GUI
-
wxLogSysError( _("Fork failed") );
ARGS_CLEANUP;
}
else if ( pid == 0 ) // we're in child
{
-#if wxUSE_GUI
- close(end_proc_detect[0]); // close reading side
-#endif // wxUSE_GUI
-
// These lines close the open file descriptors to to avoid any
// input/output which might block the process or irritate the user. If
// one wants proper IO for the subprocess, the right thing to do is to
// start an xterm executing it.
- if ( !sync )
+ if ( !(flags & wxEXEC_SYNC) )
{
for ( int fd = 0; fd < FD_SETSIZE; fd++ )
{
- if ( fd == pipeIn[0] || fd == pipeOut[1] || fd == pipeErr[1]
+ if ( fd == pipeIn[wxPipe::Read]
+ || fd == pipeOut[wxPipe::Write]
+ || fd == pipeErr[wxPipe::Write]
#if wxUSE_GUI
- || fd == end_proc_detect[1]
+ || fd == pipeEndProcDetect[wxPipe::Write]
#endif // wxUSE_GUI
)
{
continue;
}
- // leave stderr opened too, it won't do any hurm
+ // leave stderr opened too, it won't do any harm
if ( fd != STDERR_FILENO )
close(fd);
}
}
- // redirect stdio, stdout and stderr
- if ( pipeIn[0] != -1 )
+#ifndef __VMS
+ if ( flags & wxEXEC_MAKE_GROUP_LEADER )
{
- if ( dup2(pipeIn[0], STDIN_FILENO) == -1 ||
- dup2(pipeOut[1], STDOUT_FILENO) == -1 ||
- dup2(pipeErr[1], STDERR_FILENO) == -1 )
+ // Set process group to child process' pid. Then killing -pid
+ // of the parent will kill the process and all of its children.
+ setsid();
+ }
+#endif // !__VMS
+
+#if wxUSE_GUI
+ // reading side can be safely closed but we should keep the write one
+ // opened
+ pipeEndProcDetect.Detach(wxPipe::Write);
+ pipeEndProcDetect.Close();
+#endif // wxUSE_GUI
+
+ // redirect stdin, stdout and stderr
+ if ( pipeIn.IsOk() )
+ {
+ if ( dup2(pipeIn[wxPipe::Read], STDIN_FILENO) == -1 ||
+ dup2(pipeOut[wxPipe::Write], STDOUT_FILENO) == -1 ||
+ dup2(pipeErr[wxPipe::Write], STDERR_FILENO) == -1 )
{
wxLogSysError(_("Failed to redirect child process input/output"));
}
- close(pipeIn[0]);
- close(pipeOut[1]);
- close(pipeErr[1]);
+ pipeIn.Close();
+ pipeOut.Close();
+ pipeErr.Close();
}
execvp (*mb_argv, mb_argv);
// there is no return after successful exec()
_exit(-1);
+
+ // some compilers complain about missing return - of course, they
+ // should know that exit() doesn't return but what else can we do if
+ // they don't?
+ //
+ // and, sure enough, other compilers complain about unreachable code
+ // after exit() call, so we can just always have return here...
+#if defined(__VMS) || defined(__INTEL_COMPILER)
+ return 0;
+#endif
}
else // we're in parent
{
ARGS_CLEANUP;
- // pipe initialization: construction of the wxStreams
+ // prepare for IO redirection
+
+#if wxUSE_STREAMS
+ // the input buffer bufOut is connected to stdout, this is why it is
+ // called bufOut and not bufIn
+ wxStreamTempInputBuffer bufOut,
+ bufErr;
+#endif // wxUSE_STREAMS
+
if ( process && process->IsRedirected() )
{
#if wxUSE_STREAMS
- // These two streams are relative to this process.
- wxOutputStream *outStream = new wxProcessFileOutputStream(pipeIn[1]);
- wxInputStream *inStream = new wxProcessFileInputStream(pipeOut[0]);
- wxInputStream *errStream = new wxProcessFileInputStream(pipeErr[0]);
+ wxOutputStream *inStream =
+ new wxFileOutputStream(pipeIn.Detach(wxPipe::Write));
- process->SetPipeStreams(inStream, outStream, errStream);
+ wxProcessFileInputStream *outStream =
+ new wxProcessFileInputStream(pipeOut.Detach(wxPipe::Read));
+
+ wxProcessFileInputStream *errStream =
+ new wxProcessFileInputStream(pipeErr.Detach(wxPipe::Read));
+
+ process->SetPipeStreams(outStream, inStream, errStream);
+
+ bufOut.Init(outStream);
+ bufErr.Init(errStream);
#endif // wxUSE_STREAMS
+ }
- close(pipeIn[0]); // close reading side
- close(pipeOut[1]); // close writing side
- close(pipeErr[1]); // close writing side
+ if ( pipeIn.IsOk() )
+ {
+ pipeIn.Close();
+ pipeOut.Close();
+ pipeErr.Close();
}
#if wxUSE_GUI && !defined(__WXMICROWIN__)
wxEndProcessData *data = new wxEndProcessData;
- if ( sync )
+ data->tag = wxAddProcessCallback
+ (
+ data,
+ pipeEndProcDetect.Detach(wxPipe::Read)
+ );
+
+ pipeEndProcDetect.Close();
+
+ if ( flags & wxEXEC_SYNC )
{
// we may have process for capturing the program output, but it's
// not used in wxEndProcessData in the case of sync execution
// sync execution: indicate it by negating the pid
data->pid = -pid;
- data->tag = wxAddProcessCallback(data, end_proc_detect[0]);
-
- close(end_proc_detect[1]); // close writing side
wxBusyCursor bc;
wxWindowDisabler wd;
- // it will be set to 0 from GTK_EndProcessDetector
- while (data->pid != 0)
+ // data->pid will be set to 0 from GTK_EndProcessDetector when the
+ // process terminates
+ while ( data->pid != 0 )
+ {
+#if wxUSE_STREAMS
+ bufOut.Update();
+ bufErr.Update();
+#endif // wxUSE_STREAMS
+
+ // give GTK+ a chance to call GTK_EndProcessDetector here and
+ // also repaint the GUI
wxYield();
+ }
int exitcode = data->exitcode;
// will be deleted in GTK_EndProcessDetector
data->process = process;
data->pid = pid;
- data->tag = wxAddProcessCallback(data, end_proc_detect[0]);
-
- close(end_proc_detect[1]); // close writing side
return pid;
}
#else // !wxUSE_GUI
- wxASSERT_MSG( sync, wxT("async execution not supported yet") );
+
+ wxASSERT_MSG( flags & wxEXEC_SYNC,
+ wxT("async execution not supported yet") );
int exitcode = 0;
if ( waitpid(pid, &exitcode, 0) == -1 || !WIFEXITED(exitcode) )
return exitcode;
#endif // wxUSE_GUI
}
+
+ return ERROR_RETURN_CODE;
+}
#ifdef __VMS
- // VMS does not recognise exit as a return and complains about
- // a missing return
- // I think VMS is wrong in this
- // JJ
- return 0;
+#pragma message enable codeunreachable
#endif
-}
#undef ERROR_RETURN_CODE
#undef ARGS_CLEANUP
return FALSE;
}
+#ifndef __WXMAC__
wxString wxGetOsDescription()
{
#ifndef WXWIN_OS_DESCRIPTION
return WXWIN_OS_DESCRIPTION;
#endif
}
+#endif
// this function returns the GUI toolkit version in GUI programs, but OS
// version in non-GUI ones
#endif // !wxUSE_GUI
+unsigned long wxGetProcessId()
+{
+ return (unsigned long)getpid();
+}
+
long wxGetFreeMemory()
{
#if defined(__LINUX__)
bool wxGetDiskSpace(const wxString& path, wxLongLong *pTotal, wxLongLong *pFree)
{
-#ifdef HAVE_STATFS
-
- struct statfs fs;
- if ( statfs(path, &fs) != 0 )
+#if defined(HAVE_STATFS) || defined(HAVE_STATVFS)
+ // the case to "char *" is needed for AIX 4.3
+ wxStatFs fs;
+ if ( statfs((char *)(const char*)path.fn_str(), &fs) != 0 )
{
- wxLogSysError("Failed to get file system statistics");
+ wxLogSysError( wxT("Failed to get file system statistics") );
return FALSE;
}
+ // under Solaris we also have to use f_frsize field instead of f_bsize
+ // which is in general a multiple of f_frsize
+#ifdef HAVE_STATVFS
+ wxLongLong blockSize = fs.f_frsize;
+#else // HAVE_STATFS
+ wxLongLong blockSize = fs.f_bsize;
+#endif // HAVE_STATVFS/HAVE_STATFS
+
if ( pTotal )
{
- *pTotal = wxLongLong(fs.f_blocks) * fs.f_bsize;
+ *pTotal = wxLongLong(fs.f_blocks) * blockSize;
}
if ( pFree )
{
- *pFree = wxLongLong(fs.f_bavail) * fs.f_bsize;
+ *pFree = wxLongLong(fs.f_bavail) * blockSize;
}
return TRUE;
-#endif // HAVE_STATFS
-
+#else // !HAVE_STATFS && !HAVE_STATVFS
return FALSE;
+#endif // HAVE_STATFS
}
// ----------------------------------------------------------------------------
bool wxSetEnv(const wxString& variable, const wxChar *value)
{
#if defined(HAVE_SETENV)
- return setenv(variable.mb_str(), value ? wxString(value).mb_str().data()
- : NULL, 1 /* overwrite */) == 0;
+ return setenv(variable.mb_str(),
+ value ? (const char *)wxString(value).mb_str()
+ : NULL,
+ 1 /* overwrite */) == 0;
#elif defined(HAVE_PUTENV)
wxString s = variable;
if ( value )
#include <signal.h>
-static void wxFatalSignalHandler(wxTYPE_SA_HANDLER)
+extern "C" void wxFatalSignalHandler(wxTYPE_SA_HANDLER)
{
if ( wxTheApp )
{
// error and debug output routines (deprecated, use wxLog)
// ----------------------------------------------------------------------------
+#if WXWIN_COMPATIBILITY_2_2
+
void wxDebugMsg( const char *format, ... )
{
va_list ap;
exit(3); // the same exit code as for abort()
}
+#endif // WXWIN_COMPATIBILITY_2_2
+
projects / wxWidgets.git / blobdiff