Small mods

[wxWidgets.git] / docs / latex / wx / listctrl.tex

diff --git a/docs/latex/wx/listctrl.tex b/docs/latex/wx/listctrl.tex
index 4fac88641cb11ac7c4c3ea8ed723c37e6b4086ef..02eaefa92b6dcf585ad3184d54a282b42e21b851 100644 (file)
--- a/docs/latex/wx/listctrl.tex
+++ b/docs/latex/wx/listctrl.tex
@@ -1,9 +1,13 @@
 \section{\class{wxListCtrl}}\label{wxlistctrl}
 
 \section{\class{wxListCtrl}}\label{wxlistctrl}
 

-A list control presents lists in a number of formats: list view, report view, icon view
-and small icon view. Elements are numbered from zero.
+A list control presents lists in a number of formats: list view, report view,
+icon view and small icon view. In any case, elements are numbered from zero.

 
 

-To intercept events from a list control, use the event table macros described in \helpref{wxListEvent}{wxlistevent}.
+Using many of wxListCtrl is shown in the
+\helpref{corresponding sample}{samplelistctrl}.
+
+To intercept events from a list control, use the event table macros described
+in \helpref{wxListEvent}{wxlistevent}.

 
 \wxheading{Derived from}
 
 
 \wxheading{Derived from}
 


@@ -140,7 +144,7 @@ Deletes all items and all columns.
 
 \func{bool}{DeleteItem}{\param{long }{item}}
 
 
 \func{bool}{DeleteItem}{\param{long }{item}}
 

-Deletes the specified item. This function sends the 
+Deletes the specified item. This function sends the

 {\tt wxEVT\_COMMAND\_LIST\_DELETE\_ITEM} event for the item being deleted.
 
 See also: \helpref{DeleteAllItems}{wxlistctrldeleteallitems}
 {\tt wxEVT\_COMMAND\_LIST\_DELETE\_ITEM} event for the item being deleted.
 
 See also: \helpref{DeleteAllItems}{wxlistctrldeleteallitems}


@@ -151,10 +155,9 @@ See also: \helpref{DeleteAllItems}{wxlistctrldeleteallitems}
 
 Deletes all the items in the list control.
 
 
 Deletes all the items in the list control.
 

-{\bf NB:} This function does {\it not} send the 
+{\bf NB:} This function does {\it not} send the

 {\tt wxEVT\_COMMAND\_LIST\_DELETE\_ITEM} event because deleting many items
 {\tt wxEVT\_COMMAND\_LIST\_DELETE\_ITEM} event because deleting many items

-from the control would be too slow then (unlike 
-        \helpref{DeleteItem}{wxlistctrldeleteitem})
+from the control would be too slow then (unlike \helpref{DeleteItem}{wxlistctrldeleteitem}).

 
 \membersection{wxListCtrl::DeleteColumn}\label{wxlistctrldeletecolumn}
 
 
 \membersection{wxListCtrl::DeleteColumn}\label{wxlistctrldeletecolumn}
 


@@ -200,9 +203,9 @@ the item after {\it start} or the beginning if {\it start} is -1.
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}

-\twocolitem{\bf{FindItem(start, str, partial=FALSE)}}{}
-\twocolitem{\bf{FindItemData(start, data)}}{}
-\twocolitem{\bf{FindItemAtPos(start, point, direction)}}{}
+\twocolitem{{\bf FindItem(start, str, partial=FALSE)}}{}
+\twocolitem{{\bf FindItemData(start, data)}}{}
+\twocolitem{{\bf FindItemAtPos(start, point, direction)}}{}

 \end{twocollist}}
 }
 
 \end{twocollist}}
 }
 


@@ -254,9 +257,12 @@ Returns the specified image list. {\it which} may be one of:
 Gets information about the item. See \helpref{wxListCtrl::SetItem}{wxlistctrlsetitem} for more
 information.
 
 Gets information about the item. See \helpref{wxListCtrl::SetItem}{wxlistctrlsetitem} for more
 information.
 

+You must call {\it info.SetId()} to se ID of item you're interested in
+before calling this method.
+

 \pythonnote{The wxPython version of this method takes an integer parameter
 \pythonnote{The wxPython version of this method takes an integer parameter

-for the item ID, and returns the wxListItem object.
-}
+for the item ID, an optional integer for the column number, and
+returns the wxListItem object.  }

 
 \membersection{wxListCtrl::GetItemData}\label{wxlistctrlgetitemdata}
 
 
 \membersection{wxListCtrl::GetItemData}\label{wxlistctrlgetitemdata}
 


@@ -282,7 +288,7 @@ Returns the rectangle representing the item's size and position, in client coord
 {\it code} is one of wxLIST\_RECT\_BOUNDS, wxLIST\_RECT\_ICON, wxLIST\_RECT\_LABEL.
 
 \pythonnote{The wxPython version of this method accepts only the item
 {\it code} is one of wxLIST\_RECT\_BOUNDS, wxLIST\_RECT\_ICON, wxLIST\_RECT\_LABEL.
 
 \pythonnote{The wxPython version of this method accepts only the item

-ID and returns the wxRect.}
+ID and code and returns the wxRect.}

 
 \membersection{wxListCtrl::GetItemState}\label{wxlistctrlgetitemstate}
 
 
 \membersection{wxListCtrl::GetItemState}\label{wxlistctrlgetitemstate}
 


@@ -316,10 +322,29 @@ Gets the item text for this item.
 
 \constfunc{long}{GetNextItem}{\param{long }{item}, \param{int }{geometry = wxLIST\_NEXT\_ALL}, \param{int }{state = wxLIST\_STATE\_DONTCARE}}
 
 
 \constfunc{long}{GetNextItem}{\param{long }{item}, \param{int }{geometry = wxLIST\_NEXT\_ALL}, \param{int }{state = wxLIST\_STATE\_DONTCARE}}
 

-Searches for an item with the given goemetry or state, starting from {\it item}. {\it item} can be -1
-to find the first item that matches the specified flags.
+Searches for an item with the given goemetry or state, starting from
+{\it item} but excluding the {\it item} itself. If {\it item} is -1,
+the first item that matches the specified flags will be returned.
+
+Returns the first item with given state following {\it item} or -1 if
+no such item found.

 
 

-Returns the item or -1 if unsuccessful.
+This function may be used to find all selected items in the control like this:
+
+\begin{verbatim}
+    long item = -1;
+    for ( ;; )
+    {
+        item = listctrl->GetNextItem(item,
+                                     wxLIST_NEXT_ALL,
+                                     wxLIST_STATE_SELECTED);
+        if ( item == -1 )
+            break;
+
+        // this item is selected - do whatever is needed with it
+        wxLogMessage("Item %ld is selected."), item);
+    }
+\end{verbatim}

 
 {\it geometry} can be one of:
 
 
 {\it geometry} can be one of:
 


@@ -332,6 +357,9 @@ Returns the item or -1 if unsuccessful.
 \twocolitem{wxLIST\_NEXT\_RIGHT}{Searches for an item to the right of the specified item.}
 \end{twocollist}
 
 \twocolitem{wxLIST\_NEXT\_RIGHT}{Searches for an item to the right of the specified item.}
 \end{twocollist}
 

+{\bf NB:} this parameters is only supported by wxMSW currently and ignored on
+other platforms.
+

 {\it state} can be a bitlist of the following:
 
 \twocolwidtha{5cm}
 {\it state} can be a bitlist of the following:
 
 \twocolwidtha{5cm}


@@ -385,7 +413,7 @@ wxLIST\_HITTEST\_ONITEMSTATEICON.}
 \end{twocollist}
 
 \pythonnote{A tuple of values is returned in the wxPython version of
 \end{twocollist}
 
 \pythonnote{A tuple of values is returned in the wxPython version of

-thsi method.  The first value is the item id and the second is the
+this method. The first value is the item id and the second is the

 flags value mentioned above.}
 
 \membersection{wxListCtrl::InsertColumn}\label{wxlistctrlinsertcolumn}
 flags value mentioned above.}
 
 \membersection{wxListCtrl::InsertColumn}\label{wxlistctrlinsertcolumn}


@@ -402,9 +430,9 @@ For list view mode (only), inserts a column. For more details, see \helpref{wxLi
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}

-\twocolitem{\bf{InsertColumn(col, heading, format=wxLIST_FORMAT_LEFT,
+\twocolitem{{\bf InsertColumn(col, heading, format=wxLIST\_FORMAT\_LEFT,

 width=-1)}}{Creates a column using a header string only.}
 width=-1)}}{Creates a column using a header string only.}

-\twocolitem{\bf{InsertColumnInfo(col, item)}}{Creates a column using a
+\twocolitem{{\bf InsertColumnInfo(col, item)}}{Creates a column using a

 wxListInfo.}
 \end{twocollist}}
 }
 wxListInfo.}
 \end{twocollist}}
 }


@@ -440,11 +468,11 @@ Insert an image/string item.
 
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par

-\indented{2cm}{\begin{twocollist}
-\twocolitem{\bf{InsertItem(item)}}{Inserts an item using a wxListItem.}
-\twocolitem{\bf{InsertStringItem(index, label)}}{Inserts a string item.}
-\twocolitem{\bf{InsertImageItem(index, imageIndex)}}{Inserts an image item.}
-\twocolitem{\bf{InsertImageStringItem(index, label, imageIndex)}}{Insert an image/string item.}
+\indented{2cm}{\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf InsertItem(item)}}{Inserts an item using a wxListItem.}
+\twocolitem{{\bf InsertStringItem(index, label)}}{Inserts a string item.}
+\twocolitem{{\bf InsertImageItem(index, imageIndex)}}{Inserts an image item.}
+\twocolitem{{\bf InsertImageStringItem(index, label, imageIndex)}}{Insert an image/string item.}

 \end{twocollist}}
 }
 
 \end{twocollist}}
 }
 


@@ -496,6 +524,8 @@ wxIMAGE\_LIST\_NORMAL, wxIMAGE\_LIST\_SMALL, wxIMAGE\_LIST\_STATE (the last is u
 
 \func{bool}{SetItem}{\param{wxListItem\& }{info}}
 
 
 \func{bool}{SetItem}{\param{wxListItem\& }{info}}
 

+\func{long}{SetItem}{\param{long }{index}, \param{int }{col}, \param{const }{wxString\& label}, \param{int }{imageId = -1}}
+

 Sets information about the item.
 
 wxListItem is a class with the following members:
 Sets information about the item.
 
 wxListItem is a class with the following members:


@@ -529,6 +559,12 @@ The {\bf m\_mask} member contains a bitlist specifying which of the other fields
 
 The {\bf m\_stateMask} and {\bf m\_state} members take flags from the following:
 
 
 The {\bf m\_stateMask} and {\bf m\_state} members take flags from the following:
 

+The wxListItem object can also contain item-specific colour and font
+information: for this you need to call one of SetTextColour(),
+SetBackgroundColour() or SetFont() functions on it passing it the colour/font
+to use. If the colour/font is not specified, the default list control
+colour/font is used.
+

 \twocolwidtha{5cm}
 \begin{twocollist}\itemsep=0pt
 \twocolitem{wxLIST\_STATE\_DONTCARE}{Don't care what the state is. Win32 only. }
 \twocolwidtha{5cm}
 \begin{twocollist}\itemsep=0pt
 \twocolitem{wxLIST\_STATE\_DONTCARE}{Don't care what the state is. Win32 only. }


@@ -545,13 +581,12 @@ Sets a string field at a particular column.
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}

-\twocolitem{\bf{SetItem(item)}}{Sets information about the given wxListItem.}
-\twocolitem{\bf{SetStringItem(index, col, label, imageId)}}{Sets a
+\twocolitem{{\bf SetItem(item)}}{Sets information about the given wxListItem.}
+\twocolitem{{\bf SetStringItem(index, col, label, imageId)}}{Sets a

 string or image at a given location.}
 \end{twocollist}}
 }
 
 string or image at a given location.}
 \end{twocollist}}
 }
 

-

 \membersection{wxListCtrl::SetItemData}\label{wxlistctrlsetitemdata}
 
 \func{bool}{SetItemData}{\param{long }{item}, \param{long }{data}}
 \membersection{wxListCtrl::SetItemData}\label{wxlistctrlsetitemdata}
 
 \func{bool}{SetItemData}{\param{long }{item}, \param{long }{data}}


@@ -605,21 +640,38 @@ Sets the whole window style.
 
 \membersection{wxListCtrl::SortItems}\label{wxlistctrlsortitems}
 
 
 \membersection{wxListCtrl::SortItems}\label{wxlistctrlsortitems}
 

-\func{bool}{SortItems}{\param{wxListCtrlCompare }{fn}, \param{long }{data}}
+\func{bool}{SortItems}{\param{wxListCtrlCompare }{fnSortCallBack}, \param{long }{data}}
+
+Call this function to sort the items in the list control. Sorting is done
+using the specified {\it fnSortCallBack} function. This function must have the
+following prototype:

 
 

-Sorts the items in the list control.
+\begin{verbatim}
+int wxCALLBACK wxListCompareFunction(long item1, long item2, long sortData)
+\end{verbatim}
+
+It is called each time when the two items must be compared and should return 0
+if the items are equal, negative value if the first item is less than the
+second one and positive value if the first one is greater than the second one
+(the same convention as used by {\tt qsort(3)}).
+
+\wxheading{Parameters}

 
 

-fn is a function which takes 3 long arguments: item1, item2, data.
+\docparam{item1}{client data associated with the first item ({\bf NOT} the index).}

 
 

-item1 is the long data associated with a first item (NOT the index).
+\docparam{item2}{client data associated with the second item ({\bf NOT} the index).}

 
 

-item2 is the long data associated with a second item (NOT the index).
+\docparam{data}{the value passed to SortItems() itself.}

 
 

-data is the same value as passed to SortItems.
+Notice that the control may only be sorted on client data associated with the
+items, so you {\bf must} use \helpref{SetItemData}{wxlistctrlsetitemdata} if
+you want to be able to sort the items in the control.

 
 

-The return value is a negative number if the first item should precede the second
-item, a positive number of the second item should precede the first,
-or zero if the two items are equivalent.
+Please see the \helpref{listctrl sample}{samplelistctrl} for an example of
+using this function.

 
 

-data is arbitrary data to be passed to the sort function.
+\pythonnote{wxPython uses the sortData parameter to pass the Python
+function to call, so it is not available for programmer use.  Call
+SortItems with a reference to a callable object that expects two
+parameters.}