]> git.saurik.com Git - wxWidgets.git/blobdiff - tests/streams/bstream.h
Don't use GetThreadId() in wxMSW code.
[wxWidgets.git] / tests / streams / bstream.h
index c3893d73e54f301cdaec85ffc83e36387a4b408c..83f7d9d49eebcc8cbce184b36342cc274e1da2fc 100644 (file)
@@ -4,7 +4,7 @@
 // Author:      Hans Van Leemputten
 // RCS-ID:      $Id$
 // Copyright:   (c) 2004 Hans Van Leemputten
-// Licence:     wxWidgets licence
+// Licence:     wxWindows licence
 ///////////////////////////////////////////////////////////////////////////////
 
 #ifndef _WX_TESTBSTREAM_H__
@@ -28,7 +28,6 @@
     CPPUNIT_TEST_SUITE_NAMED_REGISTRATION( Name, COMPOSE_TEST_NAME(Name) ); \
     STREAM_IMPLEMENT_SUB_REGISTRATION_ROUTINE( Name )
 
-
 ///////////////////////////////////////////////////////////////////////////////
 // Template class that implements a test for all base stream functions.
 //
@@ -82,7 +81,7 @@ protected:
         const TStreamIn &stream_in = CreateInStream();
         CPPUNIT_ASSERT(!stream_in.Eof());
 
-        // Size should be greater then zero.
+        // Size should be greater than zero.
         // Note: streams not supporting this should register this test
         //       with CPPUNIT_TEST_FAIL instead of CPPUNIT_TEST.
         CPPUNIT_ASSERT(stream_in.GetSize() != 0);
@@ -155,7 +154,7 @@ protected:
         // Check EOF stream state.
         CPPUNIT_ASSERT_MESSAGE("EOF is not EOF?", stream_in.Eof());
 
-        // Ok we found the end, lets see if we can go past it.
+        // Ok we found the end, let's see if we can go past it.
         for (size_t i = 0; i < 100; i++)
             (void)stream_in.GetC();
 
@@ -173,9 +172,9 @@ protected:
 
         char buf[5];
         (void)stream_in.Read(buf, 5);
-        CPPUNIT_ASSERT(stream_in.LastRead() == 5);
+        CPPUNIT_ASSERT_EQUAL(5, stream_in.LastRead());
         (void)stream_in.GetC();
-        CPPUNIT_ASSERT(stream_in.LastRead() == 1);
+        CPPUNIT_ASSERT_EQUAL(1, stream_in.LastRead());
     }
 
     void Input_CanRead()
@@ -203,10 +202,10 @@ protected:
         // Try to Seek in the stream...
         // Note: streams not supporting this should register this test
         //       with CPPUNIT_TEST_FAIL instead of CPPUNIT_TEST.
-        CPPUNIT_ASSERT(stream_in.SeekI(2, wxFromStart) == 2);
-        CPPUNIT_ASSERT(stream_in.SeekI(2, wxFromCurrent) == 4);
+        CPPUNIT_ASSERT_EQUAL(2, stream_in.SeekI(2, wxFromStart));
+        CPPUNIT_ASSERT_EQUAL(4, stream_in.SeekI(2, wxFromCurrent));
         // Not sure the following line is correct, so test it differently.
-        //CPPUNIT_ASSERT(stream_in.SeekI(-2, wxFromEnd) == (off_t)stream_in.GetSize()-2);
+        //CPPUNIT_ASSERT_EQUAL(stream_in.GetSize()-2, stream_in.SeekI(-2, wxFromEnd));
         CPPUNIT_ASSERT(stream_in.SeekI(-2, wxFromEnd) != wxInvalidOffset);
         // Go beyond the stream size.
         CPPUNIT_ASSERT((stream_in.SeekI(10, wxFromCurrent) == wxInvalidOffset) == m_bSeekInvalidBeyondEnd);
@@ -218,25 +217,22 @@ protected:
         CleanupHelper cleanup(this);
         TStreamIn &stream_in = CreateInStream();
 
-        // this test shouldn't be used at all if the stream isn't seekable
-        CPPUNIT_ASSERT( stream_in.IsSeekable() );
-
         CPPUNIT_ASSERT(!stream_in.Eof());
 
         // Try to Get the location in the stream...
-        CPPUNIT_ASSERT(stream_in.TellI() == 0);
+        CPPUNIT_ASSERT_EQUAL(0, stream_in.TellI());
         (void)stream_in.GetC();
-        CPPUNIT_ASSERT(stream_in.TellI() == 1);
+        CPPUNIT_ASSERT_EQUAL(1, stream_in.TellI());
         if (!m_bSimpleTellITest)
         {
             wxFileOffset pos = stream_in.SeekI(5, wxFromStart);
-            CPPUNIT_ASSERT(stream_in.TellI() == pos);
+            CPPUNIT_ASSERT_EQUAL(pos, stream_in.TellI());
             (void)stream_in.GetC();
-            CPPUNIT_ASSERT(stream_in.TellI() == 6);
+            CPPUNIT_ASSERT_EQUAL(6, stream_in.TellI());
             pos = stream_in.SeekI(2, wxFromCurrent);
-            CPPUNIT_ASSERT(stream_in.TellI() == pos);
+            CPPUNIT_ASSERT_EQUAL(pos, stream_in.TellI());
             pos = stream_in.SeekI(5, wxFromStart);
-            CPPUNIT_ASSERT(stream_in.TellI() == pos);
+            CPPUNIT_ASSERT_EQUAL(pos, stream_in.TellI());
         }
     }
 
@@ -252,7 +248,7 @@ protected:
             char peekChar = stream_in.Peek();
             char getChar = stream_in.GetC();
             if (stream_in.LastRead() == 1)
-                CPPUNIT_ASSERT(peekChar == getChar);
+                CPPUNIT_ASSERT_EQUAL(getChar, peekChar);
         }
     }
 
@@ -267,7 +263,7 @@ protected:
         size_t ungetsize = stream_in.Ungetch(ungetstr, strlen(ungetstr) + 1);
         if (ungetsize != 0)
         {
-            CPPUNIT_ASSERT(ungetsize == strlen(ungetstr) + 1);
+            CPPUNIT_ASSERT_EQUAL(strlen(ungetstr) + 1, ungetsize);
             char buf[10];
             (void)stream_in.Read(buf, ungetsize);
             CPPUNIT_ASSERT(strcmp(buf, ungetstr) == 0);
@@ -275,7 +271,7 @@ protected:
 
         if (stream_in.Ungetch('a'))
         {
-            CPPUNIT_ASSERT(stream_in.GetC() == 'a');
+            CPPUNIT_ASSERT_EQUAL(int('a'), stream_in.GetC());
         }
     }
 
@@ -327,9 +323,9 @@ protected:
 
         const char *buf = "12345";
         (void)stream_out.Write(buf, 5);
-        CPPUNIT_ASSERT(stream_out.LastWrite() == 5);
+        CPPUNIT_ASSERT_EQUAL(5, stream_out.LastWrite());
         (void)stream_out.PutC('1');
-        CPPUNIT_ASSERT(stream_out.LastWrite() == 1);
+        CPPUNIT_ASSERT_EQUAL(1, stream_out.LastWrite());
     }
 
     // Just try to perform a SeekO() on the output stream.
@@ -347,10 +343,10 @@ protected:
         // Try to Seek in the stream...
         // Note: streams not supporting this should register this test
         //       with CPPUNIT_TEST_FAIL instead of CPPUNIT_TEST.
-        CPPUNIT_ASSERT(stream_out.SeekO(2, wxFromStart) == 2);
-        CPPUNIT_ASSERT(stream_out.SeekO(2, wxFromCurrent) == 4);
+        CPPUNIT_ASSERT_EQUAL(2, stream_out.SeekO(2, wxFromStart));
+        CPPUNIT_ASSERT_EQUAL(4, stream_out.SeekO(2, wxFromCurrent));
         // Not sure the following line is correct, so test it differently.
-        //CPPUNIT_ASSERT(stream_out.SeekO(-2, wxFromEnd) == (off_t)stream_in.GetSize()-2);
+        //CPPUNIT_ASSERT_EQUAL(stream_in.GetSize()-2, stream_out.SeekO(-2, wxFromEnd));
         CPPUNIT_ASSERT(stream_out.SeekO(-2, wxFromEnd) != wxInvalidOffset);
         // Go beyond the stream size.
         CPPUNIT_ASSERT((stream_out.SeekO(10, wxFromCurrent) == wxInvalidOffset) == m_bSeekInvalidBeyondEnd);
@@ -362,27 +358,24 @@ protected:
         CleanupHelper cleanup(this);
         TStreamOut &stream_out = CreateOutStream();
 
-        // If this test is used, the stream must be seekable
-        CPPUNIT_ASSERT( stream_out.IsSeekable() );
-
         // Try to Get the location in the stream...
-        CPPUNIT_ASSERT(stream_out.TellO() == 0);
+        CPPUNIT_ASSERT_EQUAL(0, stream_out.TellO());
         (void)stream_out.PutC('1');
-        CPPUNIT_ASSERT(stream_out.TellO() == 1);
+        CPPUNIT_ASSERT_EQUAL(1, stream_out.TellO());
         if (!m_bSimpleTellOTest)
         {
             // First put some extra data in the stream, so it's not empty.
             const char *buf = "1234567890";
             (void)stream_out.Write(buf, 10);
 
-            off_t pos = stream_out.SeekO(5, wxFromStart);
-            CPPUNIT_ASSERT(stream_out.TellO() == pos);
+            wxFileOffset pos = stream_out.SeekO(5, wxFromStart);
+            CPPUNIT_ASSERT_EQUAL(pos, stream_out.TellO());
             (void)stream_out.PutC('1');
-            CPPUNIT_ASSERT(stream_out.TellO() == 6);
+            CPPUNIT_ASSERT_EQUAL(6, stream_out.TellO());
             pos = stream_out.SeekO(2, wxFromCurrent);
-            CPPUNIT_ASSERT(stream_out.TellO() == pos);
+            CPPUNIT_ASSERT_EQUAL(pos, stream_out.TellO());
             pos = stream_out.SeekO(5, wxFromStart);
-            CPPUNIT_ASSERT(stream_out.TellO() == pos);
+            CPPUNIT_ASSERT_EQUAL(pos, stream_out.TellO());
         }
     }
 
@@ -401,7 +394,7 @@ protected:
     {
         if (m_pCurrentIn)
         {
-            wxFAIL_MSG(_T("Error in test case, the previouse input stream needs to be delete first!"));
+            wxFAIL_MSG(wxT("Error in test case, the previouse input stream needs to be delete first!"));
         }
 
         m_pCurrentIn = DoCreateInStream();
@@ -412,7 +405,7 @@ protected:
     {
         if (m_pCurrentOut)
         {
-            wxFAIL_MSG(_T("Error in test case, the previouse output stream needs to be delete first!"));
+            wxFAIL_MSG(wxT("Error in test case, the previouse output stream needs to be delete first!"));
         }
 
         m_pCurrentOut = DoCreateOutStream();
@@ -426,7 +419,7 @@ protected:
             return;
         delete m_pCurrentIn;
         m_pCurrentIn = NULL;
-        // Incase something extra needs to be done.
+        // In case something extra needs to be done.
         DoDeleteInStream();
     }
     void DeleteOutStream()
@@ -438,7 +431,7 @@ protected:
 
         delete m_pCurrentOut;
         m_pCurrentOut = NULL;
-        // Incase something extra needs to be done.
+        // In case something extra needs to be done.
         DoDeleteOutStream();
     }