// Created: 04/01/98
// RCS-ID: $Id$
// Copyright: (c) Julian Smart and Markus Holzem
-// Licence: wxWindows licence
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
#ifdef __GNUG__
#pragma interface
#endif
-#include "wx/defs.h"
+#include "wx/wxprec.h"
+
+#ifdef __BORLANDC__
+ #pragma hdrstop
+#endif
+
+#ifndef WX_PRECOMP
+ #include "wx/setup.h"
+ #include "wx/defs.h"
+#endif // WX_PRECOMP
+
+#if wxUSE_PRINTING_ARCHITECTURE
#if wxUSE_POSTSCRIPT
+#include "wx/window.h"
#include "wx/dcmemory.h"
#include "wx/utils.h"
#include "wx/intl.h"
#include "wx/stattext.h"
#include "wx/radiobox.h"
#include "wx/textctrl.h"
+#include "wx/prntbase.h"
+#include "wx/paper.h"
+#include "wx/filefn.h"
#include <math.h>
-#ifdef __WXGTK__
-#include "gdk/gdk.h"
-#include "gtk/gtk.h"
-#endif
-
#ifdef __WXMSW__
#ifdef DrawText
/ellipsedict 8 dict def\n\
ellipsedict /mtrx matrix put\n\
/ellipse {\n\
- ellipsedict begin\n\
- /endangle exch def\n\
- /startangle exch def\n\
- /yrad exch def\n\
- /xrad exch def\n\
- /y exch def\n\
- /x exch def\n\
- /savematrix mtrx currentmatrix def\n\
- x y translate\n\
- xrad yrad scale\n\
- 0 0 1 startangle endangle arc\n\
- savematrix setmatrix\n\
- end\n\
- } def\n\
+ ellipsedict begin\n\
+ /endangle exch def\n\
+ /startangle exch def\n\
+ /yrad exch def\n\
+ /xrad exch def\n\
+ /y exch def\n\
+ /x exch def\n\
+ /savematrix mtrx currentmatrix def\n\
+ x y translate\n\
+ xrad yrad scale\n\
+ 0 0 1 startangle endangle arc\n\
+ savematrix setmatrix\n\
+ end\n\
+ } def\n\
";
static const char *wxPostScriptHeaderEllipticArc= "\
static const char *wxPostScriptHeaderSpline = "\
/DrawSplineSection {\n\
- /y3 exch def\n\
- /x3 exch def\n\
- /y2 exch def\n\
- /x2 exch def\n\
- /y1 exch def\n\
- /x1 exch def\n\
- /xa x1 x2 x1 sub 0.666667 mul add def\n\
- /ya y1 y2 y1 sub 0.666667 mul add def\n\
- /xb x3 x2 x3 sub 0.666667 mul add def\n\
- /yb y3 y2 y3 sub 0.666667 mul add def\n\
- x1 y1 lineto\n\
- xa ya xb yb x3 y3 curveto\n\
- } def\n\
+ /y3 exch def\n\
+ /x3 exch def\n\
+ /y2 exch def\n\
+ /x2 exch def\n\
+ /y1 exch def\n\
+ /x1 exch def\n\
+ /xa x1 x2 x1 sub 0.666667 mul add def\n\
+ /ya y1 y2 y1 sub 0.666667 mul add def\n\
+ /xb x3 x2 x3 sub 0.666667 mul add def\n\
+ /yb y3 y2 y3 sub 0.666667 mul add def\n\
+ x1 y1 lineto\n\
+ xa ya xb yb x3 y3 curveto\n\
+ } def\n\
";
static const char *wxPostScriptHeaderColourImage = "\
-% define 'colorimage' if it isn't defined\n\
-% ('colortogray' and 'mergeprocs' come from xwd2ps\n\
-% via xgrab)\n\
-/colorimage where % do we know about 'colorimage'?\n\
- { pop } % yes: pop off the 'dict' returned\n\
- { % no: define one\n\
- /colortogray { % define an RGB->I function\n\
- /rgbdata exch store % call input 'rgbdata'\n\
+%% define 'colorimage' if it isn't defined\n\
+%% ('colortogray' and 'mergeprocs' come from xwd2ps\n\
+%% via xgrab)\n\
+/colorimage where %% do we know about 'colorimage'?\n\
+ { pop } %% yes: pop off the 'dict' returned\n\
+ { %% no: define one\n\
+ /colortogray { %% define an RGB->I function\n\
+ /rgbdata exch store %% call input 'rgbdata'\n\
rgbdata length 3 idiv\n\
/npixls exch store\n\
/rgbindx 0 store\n\
0 1 npixls 1 sub {\n\
grays exch\n\
- rgbdata rgbindx get 20 mul % Red\n\
- rgbdata rgbindx 1 add get 32 mul % Green\n\
- rgbdata rgbindx 2 add get 12 mul % Blue\n\
- add add 64 idiv % I = .5G + .31R + .18B\n\
+ rgbdata rgbindx get 20 mul %% Red\n\
+ rgbdata rgbindx 1 add get 32 mul %% Green\n\
+ rgbdata rgbindx 2 add get 12 mul %% Blue\n\
+ add add 64 idiv %% I = .5G + .31R + .18B\n\
put\n\
/rgbindx rgbindx 3 add store\n\
} for\n\
grays 0 npixls getinterval\n\
} bind def\n\
\n\
- % Utility procedure for colorimage operator.\n\
- % This procedure takes two procedures off the\n\
- % stack and merges them into a single procedure.\n\
+ %% Utility procedure for colorimage operator.\n\
+ %% This procedure takes two procedures off the\n\
+ %% stack and merges them into a single procedure.\n\
\n\
- /mergeprocs { % def\n\
+ /mergeprocs { %% def\n\
dup length\n\
3 -1 roll\n\
dup\n\
putinterval\n\
} bind def\n\
\n\
- /colorimage { % def\n\
- pop pop % remove 'false 3' operands\n\
+ /colorimage { %% def\n\
+ pop pop %% remove 'false 3' operands\n\
{colortogray} mergeprocs\n\
image\n\
} bind def\n\
- } ifelse % end of 'false' case\n\
+ } ifelse %% end of 'false' case\n\
";
static char wxPostScriptHeaderReencodeISO1[] =
wxPostScriptDC::wxPostScriptDC ()
{
- m_pstream = (ofstream*) NULL;
-
+ m_pstream = (FILE*) NULL;
+
m_currentRed = 0;
m_currentGreen = 0;
m_currentBlue = 0;
-
+
m_pageNumber = 0;
-
+
m_clipping = FALSE;
-
+
m_underlinePosition = 0.0;
m_underlineThickness = 0.0;
m_signX = 1; // default x-axis left to right
m_signY = -1; // default y-axis bottom up -> top down
+
+ // Compatibility only
+ // HH: Doesn't seem to work for wxMSW...
+ #ifndef __WXMSW__
+ m_printData = * wxThePrintSetupData;
+ #endif
}
wxPostScriptDC::wxPostScriptDC (const wxString& file, bool interactive, wxWindow *parent)
{
- m_pstream = (ofstream*) NULL;
-
+ m_pstream = (FILE*) NULL;
+
m_currentRed = 0;
m_currentGreen = 0;
m_currentBlue = 0;
-
+
m_pageNumber = 0;
-
+
m_clipping = FALSE;
-
+
m_underlinePosition = 0.0;
m_underlineThickness = 0.0;
m_isInteractive = interactive;
m_title = "";
- m_filename = file;
+ m_printData.SetFilename(file);
#ifdef __WXMSW__
// Can only send to file in Windows
- wxThePrintSetupData->SetPrinterMode(PS_FILE);
+ m_printData.SetPrintMode(wxPRINT_MODE_FILE);
#endif
if (m_isInteractive)
{
m_ok = TRUE;
}
-
+
return m_ok;
}
+wxPostScriptDC::wxPostScriptDC (const wxPrintData& printData)
+{
+ m_pstream = (FILE*) NULL;
+
+ m_currentRed = 0;
+ m_currentGreen = 0;
+ m_currentBlue = 0;
+
+ m_pageNumber = 0;
+
+ m_clipping = FALSE;
+
+ m_underlinePosition = 0.0;
+ m_underlineThickness = 0.0;
+
+ m_signX = 1; // default x-axis left to right
+ m_signY = -1; // default y-axis bottom up -> top down
+
+ m_printData = printData;
+
+ m_ok = TRUE;
+}
+
wxPostScriptDC::~wxPostScriptDC ()
{
- if (m_pstream) delete m_pstream;
+ if (m_pstream)
+ {
+ fclose( m_pstream );
+ m_pstream = (FILE*) NULL;
+ }
}
bool wxPostScriptDC::Ok() const
{
return m_ok;
}
-
+
+// This dialog is deprecated now: use wxGenericPrintDialog or the printing framework
bool wxPostScriptDC::PrinterDialog(wxWindow *parent)
{
- wxPostScriptPrintDialog dialog( parent, _("Printer Settings"), wxPoint(150, 150), wxSize(400, 400),
+ wxPostScriptPrintDialog dialog( parent, _("Printer Settings"), wxPoint(150, 150), wxSize(400, 400),
wxDEFAULT_DIALOG_STYLE | wxDIALOG_MODAL );
m_ok = (dialog.ShowModal () == wxID_OK);
if (!m_ok) return FALSE;
- if ((m_filename == "") &&
- (wxThePrintSetupData->GetPrinterMode() == PS_PREVIEW ||
- wxThePrintSetupData->GetPrinterMode() == PS_PRINTER))
+ if ((m_printData.GetFilename() == "") &&
+ (m_printData.GetPrintMode() == wxPRINT_MODE_PREVIEW ||
+ m_printData.GetPrintMode() == wxPRINT_MODE_PRINTER))
{
// steve, 05.09.94
#ifdef __VMS__
- wxThePrintSetupData->SetPrinterFile("preview");
+ m_printData.SetFilename("preview");
#else
// For PS_PRINTER action this depends on a Unix-style print spooler
// since the wx_printer_file can be destroyed during a session
// @@@ TODO: a Windows-style answer for non-Unix
- char userId[256];
+ wxChar userId[256];
wxGetUserId (userId, sizeof (userId) / sizeof (char));
- char tmp[256];
- strcpy (tmp, "/tmp/preview_");
- strcat (tmp, userId);
- wxThePrintSetupData->SetPrinterFile(tmp);
+ wxChar tmp[256];
+ wxStrcpy (tmp, wxT("/tmp/preview_"));
+ wxStrcat (tmp, userId);
+ m_printData.SetFilename(tmp);
#endif
- char tmp2[256];
- strcpy(tmp2, wxThePrintSetupData->GetPrinterFile());
- strcat (tmp2, ".ps");
- wxThePrintSetupData->SetPrinterFile(tmp2);
- m_filename = tmp2;
+ wxChar tmp2[256];
+ wxStrcpy(tmp2, m_printData.GetFilename());
+ wxStrcat (tmp2, wxT(".ps"));
+ m_printData.SetFilename(tmp2);
}
- else if ((m_filename == "") && (wxThePrintSetupData->GetPrinterMode() == PS_FILE))
+ else if ((m_printData.GetFilename() == wxT("")) && (m_printData.GetPrintMode() == wxPRINT_MODE_FILE))
{
- char *file = wxSaveFileSelector (_("PostScript"), "ps");
- if (!file)
+ wxString file = wxSaveFileSelector (_("PostScript"), wxT("ps"));
+ if ( file.IsEmpty() )
{
m_ok = FALSE;
return FALSE;
}
- wxThePrintSetupData->SetPrinterFile(file);
- m_filename = file;
+
+ m_printData.SetFilename(file);
m_ok = TRUE;
}
return m_ok;
}
-void wxPostScriptDC::SetClippingRegion (long x, long y, long w, long h)
+void wxPostScriptDC::DoSetClippingRegion (wxCoord x, wxCoord y, wxCoord w, wxCoord h)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
- if (m_clipping) return;
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
+ if (m_clipping) DestroyClippingRegion();
+
+ wxDC::DoSetClippingRegion(x, y, w, h);
- wxDC::SetClippingRegion( x, y, w, h );
-
m_clipping = TRUE;
- *m_pstream << "gsave\n"
- << "newpath\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y) << " moveto\n"
- << XLOG2DEV(x+w) << " " << YLOG2DEV(y) << " lineto\n"
- << XLOG2DEV(x+w) << " " << YLOG2DEV(y+h) << " lineto\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y+h) << " lineto\n"
- << "closepath clip newpath\n";
+ fprintf( m_pstream,
+ "gsave\n newpath\n"
+ "%d %d moveto\n"
+ "%d %d lineto\n"
+ "%d %d lineto\n"
+ "%d %d lineto\n"
+ "closepath clip newpath\n",
+ XLOG2DEV(x), YLOG2DEV(y),
+ XLOG2DEV(x+w), YLOG2DEV(y),
+ XLOG2DEV(x+w), YLOG2DEV(y+h),
+ XLOG2DEV(x), YLOG2DEV(y+h) );
}
-void wxPostScriptDC::SetClippingRegion( const wxRegion &WXUNUSED(region) )
-{
-}
void wxPostScriptDC::DestroyClippingRegion()
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
- wxDC::DestroyClippingRegion();
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (m_clipping)
{
m_clipping = FALSE;
- *m_pstream << "grestore\n";
+ fprintf( m_pstream, "grestore\n" );
}
+
+ wxDC::DestroyClippingRegion();
}
void wxPostScriptDC::Clear()
{
- wxFAIL_MSG( "wxPostScriptDC::Clear not implemented." );
+ wxFAIL_MSG( wxT("wxPostScriptDC::Clear not implemented.") );
}
-void wxPostScriptDC::FloodFill (long WXUNUSED(x), long WXUNUSED(y), const wxColour &WXUNUSED(col), int WXUNUSED(style))
+void wxPostScriptDC::DoFloodFill (wxCoord WXUNUSED(x), wxCoord WXUNUSED(y), const wxColour &WXUNUSED(col), int WXUNUSED(style))
{
- wxFAIL_MSG( "wxPostScriptDC::FloodFill not implemented." );
+ wxFAIL_MSG( wxT("wxPostScriptDC::FloodFill not implemented.") );
}
-bool wxPostScriptDC::GetPixel (long WXUNUSED(x), long WXUNUSED(y), wxColour * WXUNUSED(col)) const
+bool wxPostScriptDC::DoGetPixel (wxCoord WXUNUSED(x), wxCoord WXUNUSED(y), wxColour * WXUNUSED(col)) const
{
- wxFAIL_MSG( "wxPostScriptDC::GetPixel not implemented." );
+ wxFAIL_MSG( wxT("wxPostScriptDC::GetPixel not implemented.") );
return FALSE;
}
-void wxPostScriptDC::CrossHair (long WXUNUSED(x), long WXUNUSED(y))
+void wxPostScriptDC::DoCrossHair (wxCoord WXUNUSED(x), wxCoord WXUNUSED(y))
{
- wxFAIL_MSG( "wxPostScriptDC::CrossHair not implemented." );
+ wxFAIL_MSG( wxT("wxPostScriptDC::CrossHair not implemented.") );
}
-void wxPostScriptDC::DrawLine (long x1, long y1, long x2, long y2)
+void wxPostScriptDC::DoDrawLine (wxCoord x1, wxCoord y1, wxCoord x2, wxCoord y2)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (m_pen.GetStyle() == wxTRANSPARENT) return;
-
+
SetPen( m_pen );
-
- *m_pstream << "newpath\n"
- << XLOG2DEV(x1) << " " << YLOG2DEV (y1) << " moveto\n"
- << XLOG2DEV(x2) << " " << YLOG2DEV (y2) << " lineto\n"
- << "stroke\n";
-
+
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d moveto\n"
+ "%d %d lineto\n"
+ "stroke\n",
+ XLOG2DEV(x1), YLOG2DEV(y1),
+ XLOG2DEV(x2), YLOG2DEV (y2) );
+
CalcBoundingBox( x1, y1 );
CalcBoundingBox( x2, y2 );
}
#define RAD2DEG 57.29577951308
-void wxPostScriptDC::DrawArc (long x1, long y1, long x2, long y2, long xc, long yc)
+void wxPostScriptDC::DoDrawArc (wxCoord x1, wxCoord y1, wxCoord x2, wxCoord y2, wxCoord xc, wxCoord yc)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
- long dx = x1 - xc;
- long dy = y1 - yc;
- long radius = (long) sqrt(dx*dx+dy*dy);
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
+ wxCoord dx = x1 - xc;
+ wxCoord dy = y1 - yc;
+ wxCoord radius = (wxCoord) sqrt( (double)(dx*dx+dy*dy) );
double alpha1, alpha2;
- if (x1 == x2 && y1 == y2)
+ if (x1 == x2 && y1 == y2)
{
- alpha1 = 0.0;
- alpha2 = 360.0;
- } else if (radius == 0.0)
+ alpha1 = 0.0;
+ alpha2 = 360.0;
+ }
+ else if (radius == 0.0)
{
- alpha1 = alpha2 = 0.0;
- } else
+ alpha1 = alpha2 = 0.0;
+ }
+ else
{
- alpha1 = (x1 - xc == 0) ?
- (y1 - yc < 0) ? 90.0 : -90.0 :
- -atan2(double(y1-yc), double(x1-xc)) * RAD2DEG;
- alpha2 = (x2 - xc == 0) ?
- (y2 - yc < 0) ? 90.0 : -90.0 :
- -atan2(double(y2-yc), double(x2-xc)) * RAD2DEG;
+ alpha1 = (x1 - xc == 0) ?
+ (y1 - yc < 0) ? 90.0 : -90.0 :
+ -atan2(double(y1-yc), double(x1-xc)) * RAD2DEG;
+ alpha2 = (x2 - xc == 0) ?
+ (y2 - yc < 0) ? 90.0 : -90.0 :
+ -atan2(double(y2-yc), double(x2-xc)) * RAD2DEG;
}
while (alpha1 <= 0) alpha1 += 360;
while (alpha2 <= 0) alpha2 += 360; // adjust angles to be between
while (alpha1 > 360) alpha1 -= 360; // 0 and 360 degree
while (alpha2 > 360) alpha2 -= 360;
- if (m_brush.GetStyle() != wxTRANSPARENT)
- {
- SetBrush( m_brush );
- *m_pstream << "newpath\n"
- << XLOG2DEV(xc) << " "
- << YLOG2DEV(yc) << " "
- << XLOG2DEVREL(radius) << " "
- << YLOG2DEVREL(radius) << " "
- << alpha1 << " "
- << alpha2 << " ellipse\n"
- << XLOG2DEV(xc) << " "
- << YLOG2DEV(yc) << " lineto\n"
- << "closepath\n"
- << "fill\n";
- }
-
- if (m_pen.GetStyle() != wxTRANSPARENT)
- {
- SetPen( m_pen );
- *m_pstream << "newpath\n"
- << XLOG2DEV(xc) << " "
- << YLOG2DEV(yc) << " "
- << XLOG2DEVREL(radius) << " "
- << YLOG2DEVREL(radius) << " "
- << alpha1 << " "
- << alpha2 << " ellipse\n"
- << "stroke\n";
- }
-
- CalcBoundingBox( xc-radius, yc-radius );
- CalcBoundingBox( xc+radius, yc+radius );
-}
-
-void wxPostScriptDC::DrawEllipticArc(long x,long y,long w,long h,double sa,double ea)
-{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ if (m_brush.GetStyle() != wxTRANSPARENT)
+ {
+ SetBrush( m_brush );
+
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d %d %d %d %d ellipse\n"
+ "%d %d lineto\n"
+ "closepath\n"
+ "fill\n",
+ XLOG2DEV(xc), YLOG2DEV(yc), XLOG2DEVREL(radius), YLOG2DEVREL(radius), (wxCoord)alpha1, (wxCoord) alpha2,
+ XLOG2DEV(xc), YLOG2DEV(yc) );
+
+ CalcBoundingBox( xc-radius, yc-radius );
+ CalcBoundingBox( xc+radius, yc+radius );
+ }
+
+ if (m_pen.GetStyle() != wxTRANSPARENT)
+ {
+ SetPen( m_pen );
+
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d %d %d %d %d ellipse\n"
+ "%d %d lineto\n"
+ "stroke\n"
+ "fill\n",
+ XLOG2DEV(xc), YLOG2DEV(yc), XLOG2DEVREL(radius), YLOG2DEVREL(radius), (wxCoord)alpha1, (wxCoord) alpha2,
+ XLOG2DEV(xc), YLOG2DEV(yc) );
+
+ CalcBoundingBox( xc-radius, yc-radius );
+ CalcBoundingBox( xc+radius, yc+radius );
+ }
+}
+
+void wxPostScriptDC::DoDrawEllipticArc(wxCoord x,wxCoord y,wxCoord w,wxCoord h,double sa,double ea)
+{
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (sa>=360 || sa<=-360) sa=sa-int(sa/360)*360;
if (ea>=360 || ea<=-360) ea=ea-int(ea/360)*360;
if (sa<0) sa+=360;
if (ea<0) ea+=360;
-
+
if (sa==ea)
{
DrawEllipse(x,y,w,h);
{
SetBrush( m_brush );
- *m_pstream << "newpath\n"
- << XLOG2DEV(x+w/2) << " " << YLOG2DEV(y+h/2) << " "
- << XLOG2DEVREL(w/2) << " " << YLOG2DEVREL(h/2) << " "
- << int(sa) <<" "<< int(ea) << " true ellipticarc\n";
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d %d %d %d %d true ellipticarc\n",
+ XLOG2DEV(x+w/2), YLOG2DEV(y+h/2), XLOG2DEVREL(w/2), YLOG2DEVREL(h/2), (wxCoord)sa, (wxCoord)ea );
CalcBoundingBox( x ,y );
CalcBoundingBox( x+w, y+h );
}
-
+
if (m_pen.GetStyle () != wxTRANSPARENT)
{
SetPen( m_pen );
- *m_pstream << "newpath\n"
- << XLOG2DEV(x+w/2) << " " << YLOG2DEV(y+h/2) << " "
- << XLOG2DEVREL(w/2) << " " << XLOG2DEVREL(h/2) << " "
- << int(sa) <<" "<< int(ea) << " false ellipticarc\n";
+ fprintf(m_pstream,
+ "newpath\n"
+ "%d %d %d %d %d %d false ellipticarc\n",
+ XLOG2DEV(x+w/2), YLOG2DEV(y+h/2), XLOG2DEVREL(w/2), YLOG2DEVREL(h/2), (wxCoord)sa, (wxCoord)ea );
- CalcBoundingBox( x, y );
+ CalcBoundingBox( x ,y );
CalcBoundingBox( x+w, y+h );
}
}
-void wxPostScriptDC::DrawPoint (long x, long y)
+void wxPostScriptDC::DoDrawPoint (wxCoord x, wxCoord y)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (m_pen.GetStyle() == wxTRANSPARENT) return;
-
+
SetPen (m_pen);
-
- *m_pstream << "newpath\n"
- << XLOG2DEV(x) << " " << YLOG2DEV (y) << " moveto\n"
- << XLOG2DEV(x+1) << " " << YLOG2DEV (y) << " lineto\n"
- << "stroke\n";
-
+
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d moveto\n"
+ "%d %d lineto\n"
+ "stroke\n",
+ XLOG2DEV(x), YLOG2DEV(y),
+ XLOG2DEV(x+1), YLOG2DEV(y) );
+
CalcBoundingBox( x, y );
}
-void wxPostScriptDC::DrawPolygon (int n, wxPoint points[], long xoffset, long yoffset, int WXUNUSED(fillStyle))
+void wxPostScriptDC::DoDrawPolygon (int n, wxPoint points[], wxCoord xoffset, wxCoord yoffset, int WXUNUSED(fillStyle))
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (n <= 0) return;
-
+
if (m_brush.GetStyle () != wxTRANSPARENT)
{
- SetBrush( m_brush );
-
- *m_pstream << "newpath\n";
+ SetBrush( m_brush );
+
+ fprintf( m_pstream, "newpath\n" );
+
+ wxCoord xx = XLOG2DEV(points[0].x + xoffset);
+ wxCoord yy = YLOG2DEV(points[0].y + yoffset);
+
+ fprintf( m_pstream, "%d %d moveto\n", xx, yy );
- long xx = XLOG2DEV(points[0].x + xoffset);
- long yy = YLOG2DEV(points[0].y + yoffset);
- *m_pstream << xx << " " << yy << " moveto\n";
- CalcBoundingBox( points[0].x + xoffset, points[0].y + yoffset );
+ CalcBoundingBox( points[0].x + xoffset, points[0].y + yoffset );
- for (int i = 1; i < n; i++)
- {
- xx = XLOG2DEV(points[i].x + xoffset);
- yy = YLOG2DEV(points[i].y + yoffset);
- *m_pstream << xx << " " << yy << " lineto\n";
- CalcBoundingBox( points[i].x + xoffset, points[i].y + yoffset);
- }
- *m_pstream << "fill\n";
+ for (int i = 1; i < n; i++)
+ {
+ xx = XLOG2DEV(points[i].x + xoffset);
+ yy = YLOG2DEV(points[i].y + yoffset);
+
+ fprintf( m_pstream, "%d %d lineto\n", xx, yy );
+
+ CalcBoundingBox( points[i].x + xoffset, points[i].y + yoffset);
+ }
+
+ fprintf( m_pstream, "fill\n" );
}
if (m_pen.GetStyle () != wxTRANSPARENT)
{
- SetPen( m_pen );
-
- *m_pstream << "newpath\n";
+ SetPen( m_pen );
+
+ fprintf( m_pstream, "newpath\n" );
- long xx = XLOG2DEV(points[0].x + xoffset);
- long yy = YLOG2DEV(points[0].y + yoffset);
- *m_pstream << xx << " " << yy << " moveto\n";
- CalcBoundingBox( points[0].x + xoffset, points[0].y + yoffset );
+ wxCoord xx = XLOG2DEV(points[0].x + xoffset);
+ wxCoord yy = YLOG2DEV(points[0].y + yoffset);
- for (int i = 1; i < n; i++)
- {
- xx = XLOG2DEV(points[i].x + xoffset);
- yy = YLOG2DEV(points[i].y + yoffset);
- *m_pstream << xx << " " << yy << " lineto\n";
- CalcBoundingBox( points[i].x + xoffset, points[i].y + yoffset);
- }
+ fprintf( m_pstream, "%d %d moveto\n", xx, yy );
- *m_pstream << "stroke\n";
+ CalcBoundingBox( points[0].x + xoffset, points[0].y + yoffset );
+
+ for (int i = 1; i < n; i++)
+ {
+ xx = XLOG2DEV(points[i].x + xoffset);
+ yy = YLOG2DEV(points[i].y + yoffset);
+
+ fprintf( m_pstream, "%d %d lineto\n", xx, yy );
+
+ CalcBoundingBox( points[i].x + xoffset, points[i].y + yoffset);
+ }
+
+ fprintf( m_pstream, "fill\n" );
}
}
-void wxPostScriptDC::DrawLines (int n, wxPoint points[], long xoffset, long yoffset)
+void wxPostScriptDC::DoDrawLines (int n, wxPoint points[], wxCoord xoffset, wxCoord yoffset)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (m_pen.GetStyle() == wxTRANSPARENT) return;
+
if (n <= 0) return;
-
+
SetPen (m_pen);
-
- for (int i=0; i<n ; ++i)
+
+ int i;
+ for ( i =0; i<n ; i++ )
{
- CalcBoundingBox( XLOG2DEV(points[i].x+xoffset), YLOG2DEV(points[i].y+yoffset));
+ CalcBoundingBox( XLOG2DEV(points[i].x+xoffset), YLOG2DEV(points[i].y+yoffset));
}
- *m_pstream << "newpath\n"
- << XLOG2DEV(points[0].x+xoffset) << " "
- << YLOG2DEV(points[0].y+yoffset) << " moveto\n";
-
- for (int i = 1; i < n; i++)
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d moveto\n",
+ XLOG2DEV(points[0].x+xoffset), YLOG2DEV(points[0].y+yoffset) );
+
+ for (i = 1; i < n; i++)
{
- *m_pstream << XLOG2DEV(points[i].x+xoffset) << " "
- << YLOG2DEV(points[i].y+yoffset) << " lineto\n";
+ fprintf( m_pstream,
+ "%d %d lineto\n",
+ XLOG2DEV(points[i].x+xoffset), YLOG2DEV(points[i].y+yoffset) );
}
-
- *m_pstream << "stroke\n";
+
+ fprintf( m_pstream, "stroke\n" );
}
-void wxPostScriptDC::DrawRectangle (long x, long y, long width, long height)
+void wxPostScriptDC::DoDrawRectangle (wxCoord x, wxCoord y, wxCoord width, wxCoord height)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (m_brush.GetStyle () != wxTRANSPARENT)
{
SetBrush( m_brush );
- *m_pstream << "newpath\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y) << " moveto\n"
- << XLOG2DEV(x + width) << " " << YLOG2DEV(y) << " lineto\n"
- << XLOG2DEV(x + width) << " " << YLOG2DEV(y + height) << " lineto\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y + height) << " lineto\n"
- << "closepath\n"
- << "fill\n";
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d moveto\n"
+ "%d %d lineto\n"
+ "%d %d lineto\n"
+ "%d %d lineto\n"
+ "closepath\n"
+ "fill\n",
+ XLOG2DEV(x), YLOG2DEV(y),
+ XLOG2DEV(x + width), YLOG2DEV(y),
+ XLOG2DEV(x + width), YLOG2DEV(y + height),
+ XLOG2DEV(x), YLOG2DEV(y + height) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
}
-
+
if (m_pen.GetStyle () != wxTRANSPARENT)
{
SetPen (m_pen);
- *m_pstream << "newpath\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y) << " moveto\n"
- << XLOG2DEV(x + width) << " " << YLOG2DEV(y) << " lineto\n"
- << XLOG2DEV(x + width) << " " << YLOG2DEV(y + height) << " lineto\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y + height) << " lineto\n"
- << "closepath\n"
- << "stroke\n";
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d moveto\n"
+ "%d %d lineto\n"
+ "%d %d lineto\n"
+ "%d %d lineto\n"
+ "closepath\n"
+ "stroke\n",
+ XLOG2DEV(x), YLOG2DEV(y),
+ XLOG2DEV(x + width), YLOG2DEV(y),
+ XLOG2DEV(x + width), YLOG2DEV(y + height),
+ XLOG2DEV(x), YLOG2DEV(y + height) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
}
}
-void wxPostScriptDC::DrawRoundedRectangle (long x, long y, long width, long height, double radius)
+void wxPostScriptDC::DoDrawRoundedRectangle (wxCoord x, wxCoord y, wxCoord width, wxCoord height, double radius)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (radius < 0.0)
{
// Now, a negative radius is interpreted to mean
// 'the proportion of the smallest X or Y dimension'
double smallest = 0.0;
if (width < height)
- smallest = width;
+ smallest = width;
else
- smallest = height;
+ smallest = height;
radius = (-radius * smallest);
}
-
- long rad = (long) radius;
+
+ wxCoord rad = (wxCoord) radius;
if (m_brush.GetStyle () != wxTRANSPARENT)
{
SetBrush( m_brush );
-
- // Draw rectangle anticlockwise
- *m_pstream << "newpath\n"
- << XLOG2DEV(x + rad) << " " << YLOG2DEV(y + rad) << " " << XLOG2DEVREL(rad) << " 90 180 arc\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y + rad) << " moveto\n"
- << XLOG2DEV(x + rad) << " " << YLOG2DEV(y + height - rad) << " " << XLOG2DEVREL(rad) << " 180 270 arc\n"
- << XLOG2DEV(x + width - rad) << " " << YLOG2DEV(y + height) << " lineto\n"
- << XLOG2DEV(x + width - rad) << " " << YLOG2DEV(y + height - rad) << " " << XLOG2DEVREL(rad) << " 270 0 arc\n"
- << XLOG2DEV(x + width) << " " << YLOG2DEV(y + rad) << " lineto\n"
- << XLOG2DEV(x + width - rad) << " " << YLOG2DEV(y + rad) << " " << XLOG2DEVREL(rad) << " 0 90 arc\n"
- << XLOG2DEV(x + rad) << " " << YLOG2DEV(y) << " lineto\n"
- << "closepath\n"
- << "fill\n";
+
+ /* Draw rectangle anticlockwise */
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d %d 90 180 arc\n"
+ "%d %d moveto\n"
+ "%d %d %d 180 270 arc\n"
+ "%d %d lineto\n"
+ "%d %d %d 270 0 arc\n"
+ "%d %d lineto\n"
+ "%d %d %d 0 90 arc\n"
+ "%d %d lineto\n"
+ "closepath\n"
+ "fill\n",
+ XLOG2DEV(x + rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x), YLOG2DEV(y + rad),
+ XLOG2DEV(x + rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x + width - rad), YLOG2DEV(y + height),
+ XLOG2DEV(x + width - rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x + width), YLOG2DEV(y + rad),
+ XLOG2DEV(x + width - rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x + rad), YLOG2DEV(y) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
}
-
+
if (m_pen.GetStyle () != wxTRANSPARENT)
{
SetPen (m_pen);
-
- // Draw rectangle anticlockwise
- *m_pstream << "newpath\n"
- << XLOG2DEV(x + rad) << " " << YLOG2DEV(y + rad) << " " << XLOG2DEVREL(rad) << " 90 180 arc\n"
- << XLOG2DEV(x) << " " << YLOG2DEV(y + rad) << " moveto\n"
- << XLOG2DEV(x + rad) << " " << YLOG2DEV(y + height - rad) << " " << XLOG2DEVREL(rad) << " 180 270 arc\n"
- << XLOG2DEV(x + width - rad) << " " << YLOG2DEV(y + height) << " lineto\n"
- << XLOG2DEV(x + width - rad) << " " << YLOG2DEV(y + height - rad) << " " << XLOG2DEVREL(rad) << " 270 0 arc\n"
- << XLOG2DEV(x + width) << " " << YLOG2DEV(y + rad) << " lineto\n"
- << XLOG2DEV(x + width - rad) << " " << YLOG2DEV(y + rad) << " " << XLOG2DEVREL(rad) << " 0 90 arc\n"
- << XLOG2DEV(x + rad) << " " << YLOG2DEV(y) << " lineto\n"
- << "closepath\n"
- << "stroke\n";
+
+ /* Draw rectangle anticlockwise */
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d %d 90 180 arc\n"
+ "%d %d moveto\n"
+ "%d %d %d 180 270 arc\n"
+ "%d %d lineto\n"
+ "%d %d %d 270 0 arc\n"
+ "%d %d lineto\n"
+ "%d %d %d 0 90 arc\n"
+ "%d %d lineto\n"
+ "closepath\n"
+ "stroke\n",
+ XLOG2DEV(x + rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x), YLOG2DEV(y + rad),
+ XLOG2DEV(x + rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x + width - rad), YLOG2DEV(y + height),
+ XLOG2DEV(x + width - rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x + width), YLOG2DEV(y + rad),
+ XLOG2DEV(x + width - rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
+ XLOG2DEV(x + rad), YLOG2DEV(y) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
}
}
-void wxPostScriptDC::DrawEllipse (long x, long y, long width, long height)
+void wxPostScriptDC::DoDrawEllipse (wxCoord x, wxCoord y, wxCoord width, wxCoord height)
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (m_brush.GetStyle () != wxTRANSPARENT)
{
SetBrush (m_brush);
- *m_pstream << "newpath\n"
- << XLOG2DEV(x + width / 2) << " " << YLOG2DEV(y + height / 2) << " "
- << XLOG2DEV(width / 2) << " " << YLOG2DEVREL(height / 2) << " 0 360 ellipse\n"
- << "fill\n";
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d %d %d 0 360 ellipse\n"
+ "fill\n",
+ XLOG2DEV(x + width / 2), YLOG2DEV(y + height / 2),
+ XLOG2DEV(width / 2), YLOG2DEVREL(height / 2) );
CalcBoundingBox( x - width, y - height );
CalcBoundingBox( x + width, y + height );
}
-
- if (m_pen.Ok() && m_pen.GetStyle () != wxTRANSPARENT)
+
+ if (m_pen.GetStyle () != wxTRANSPARENT)
{
SetPen (m_pen);
- *m_pstream << "newpath\n"
- << XLOG2DEV(x + width / 2) << " " << YLOG2DEV(y + height / 2) << " "
- << XLOG2DEV(width / 2) << " " << YLOG2DEVREL(height / 2) << " 0 360 ellipse\n"
- << "stroke\n";
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d %d %d 0 360 ellipse\n"
+ "stroke\n",
+ XLOG2DEV(x + width / 2), YLOG2DEV(y + height / 2),
+ XLOG2DEV(width / 2), YLOG2DEVREL(height / 2) );
CalcBoundingBox( x - width, y - height );
CalcBoundingBox( x + width, y + height );
}
}
-void wxPostScriptDC::DrawIcon (const wxIcon& icon, long x, long y)
+void wxPostScriptDC::DoDrawIcon( const wxIcon& icon, wxCoord x, wxCoord y )
{
DrawBitmap( icon, x, y, TRUE );
}
-void wxPostScriptDC::DrawBitmap( const wxBitmap& bitmap, long x, long y, bool WXUNUSED(useMask) )
+/* this has to be char, not wxChar */
+static char hexArray[] = "0123456789ABCDEF";
+static void LocalDecToHex( int dec, char *buf )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
+ int firstDigit = (int)(dec/16.0);
+ int secondDigit = (int)(dec - (firstDigit*16.0));
+ buf[0] = hexArray[firstDigit];
+ buf[1] = hexArray[secondDigit];
+ buf[2] = 0;
+}
+
+void wxPostScriptDC::DoDrawBitmap( const wxBitmap& bitmap, wxCoord x, wxCoord y, bool WXUNUSED(useMask) )
+{
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
if (!bitmap.Ok()) return;
-
+
wxImage image( bitmap );
-
+
if (!image.Ok()) return;
-
- int ww = XLOG2DEVREL(image.GetWidth());
- int hh = YLOG2DEVREL(image.GetHeight());
-
+
+ wxCoord ww = XLOG2DEVREL(image.GetWidth());
+ wxCoord hh = YLOG2DEVREL(image.GetHeight());
+
image = image.Scale( ww, hh );
-
+
if (!image.Ok()) return;
-
- int xx = XLOG2DEV(x);
- int yy = YLOG2DEV(y + bitmap.GetHeight());
-
- *m_pstream << "/origstate save def\n"
- << "20 dict begin\n"
- << "/pix " << ww << " string def\n"
- << "/grays " << ww << " string def\n"
- << "/npixels 0 def\n"
- << "/rgbindx 0 def\n"
- << xx << " " << yy << " translate\n"
- << ww << " " << hh << " scale\n"
- << ww << " " << hh << " 8\n"
- << "[" << ww << " 0 0 " << (-hh) << " 0 " << hh << "]\n"
- << "{currentfile pix readhexstring pop}\n"
- << "false 3 colorimage\n";
-
+
+ wxCoord xx = XLOG2DEV(x);
+ wxCoord yy = YLOG2DEV(y + bitmap.GetHeight());
+
+ fprintf( m_pstream,
+ "/origstate save def\n"
+ "20 dict begin\n"
+ "/pix %d string def\n"
+ "/grays %d string def\n"
+ "/npixels 0 def\n"
+ "/rgbindx 0 def\n"
+ "%d %d translate\n"
+ "%d %d scale\n"
+ "%d %d 8\n"
+ "[%d 0 0 %d 0 %d]\n"
+ "{currentfile pix readhexstring pop}\n"
+ "false 3 colorimage\n",
+ ww, ww, xx, yy, ww, hh, ww, hh, ww, -hh, hh );
+
for (int j = 0; j < hh; j++)
{
for (int i = 0; i < ww; i++)
{
- char buffer[5];
- buffer[2] = 0;
- wxDecToHex( image.GetRed(i,j), buffer );
- *m_pstream << buffer;
- wxDecToHex( image.GetGreen(i,j), buffer );
- *m_pstream << buffer;
- wxDecToHex( image.GetBlue(i,j), buffer );
- *m_pstream << buffer;
- }
- *m_pstream << "\n";
+ char buffer[5];
+ LocalDecToHex( image.GetRed(i,j), buffer );
+ fprintf( m_pstream, buffer );
+ LocalDecToHex( image.GetGreen(i,j), buffer );
+ fprintf( m_pstream, buffer );
+ LocalDecToHex( image.GetBlue(i,j), buffer );
+ fprintf( m_pstream, buffer );
+ }
+ fprintf( m_pstream, "\n" );
}
- *m_pstream << "end\n";
- *m_pstream << "origstate restore\n";
-
+ fprintf( m_pstream, "end\n" );
+ fprintf( m_pstream, "origstate restore\n" );
}
-void wxPostScriptDC::SetFont (const wxFont& font)
+void wxPostScriptDC::SetFont( const wxFont& font )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (!font.Ok()) return;
-
+
m_font = font;
-#ifdef __WXGTK__
- char *name = wxTheFontNameDirectory->GetPostScriptName( m_font.GetFamily(),
- m_font.GetWeight(),
- m_font.GetStyle() );
- if (!name) name = "Times-Roman";
+ const char *name;
+ const char *style = "";
+ int Style = m_font.GetStyle();
+ int Weight = m_font.GetWeight();
- *m_pstream << "/" << name << " reencodeISO def\n"
- << "/" << name << " findfont\n"
- << YLOG2DEVREL(font.GetPointSize())
- << " scalefont setfont\n";
-#else
- char buf[100];
- const char *name;
- const char *style = "";
- int Style = m_font.GetStyle ();
- int Weight = m_font.GetWeight ();
-
- switch (m_font.GetFamily ())
- {
- case wxTELETYPE:
- case wxMODERN:
- name = "/Courier";
- break;
- case wxSWISS:
- name = "/Helvetica";
- break;
- case wxROMAN:
-// name = "/Times-Roman";
- name = "/Times"; // Altered by EDZ
- break;
- case wxSCRIPT:
- name = "/Zapf-Chancery-MediumItalic";
- Style = wxNORMAL;
- Weight = wxNORMAL;
- break;
- default:
- case wxDEFAULT: // Sans Serif Font
- name = "/LucidaSans";
- }
-
- if (Style == wxNORMAL && (Weight == wxNORMAL || Weight == wxLIGHT))
- {
- if (m_font.GetFamily () == wxROMAN)
- style = "-Roman";
- else
- style = "";
- }
- else if (Style == wxNORMAL && Weight == wxBOLD)
- style = "-Bold";
-
- else if (Style == wxITALIC && (Weight == wxNORMAL || Weight == wxLIGHT))
- {
- if (m_font.GetFamily () == wxROMAN)
- style = "-Italic";
- else
- style = "-Oblique";
- }
- else if (Style == wxITALIC && Weight == wxBOLD)
- {
- if (m_font.GetFamily () == wxROMAN)
- style = "-BoldItalic";
- else
- style = "-BoldOblique";
- }
- else if (Style == wxSLANT && (Weight == wxNORMAL || Weight == wxLIGHT))
- {
- if (m_font.GetFamily () == wxROMAN)
- style = "-Italic";
- else
- style = "-Oblique";
- }
- else if (Style == wxSLANT && Weight == wxBOLD)
- {
- if (m_font.GetFamily () == wxROMAN)
- style = "-BoldItalic";
- else
- style = "-BoldOblique";
+ switch (m_font.GetFamily())
+ {
+ case wxTELETYPE:
+ case wxMODERN:
+ name = "/Courier";
+ break;
+ case wxSWISS:
+ name = "/Helvetica";
+ break;
+ case wxROMAN:
+// name = "/Times-Roman";
+ name = "/Times"; // Altered by EDZ
+ break;
+ case wxSCRIPT:
+ name = "/Zapf-Chancery-MediumItalic";
+ Style = wxNORMAL;
+ Weight = wxNORMAL;
+ break;
+ default:
+ case wxDEFAULT: // Sans Serif Font
+ name = "/LucidaSans";
}
- else
- style = "";
-
- strcpy (buf, name);
- strcat (buf, style);
- *m_pstream << buf << " findfont\n";
- // *m_pstream << (m_font.GetPointSize() * m_scaleFactor) << " scalefont setfont\n";
- // No scale factor in this implementation?
- *m_pstream << (m_font.GetPointSize()) << " scalefont setfont\n";
-#endif
+
+ if (Style == wxNORMAL && (Weight == wxNORMAL || Weight == wxLIGHT))
+ {
+ if (m_font.GetFamily () == wxROMAN)
+ style = "-Roman";
+ else
+ style = "";
+ }
+ else if (Style == wxNORMAL && Weight == wxBOLD)
+ {
+ style = "-Bold";
+ }
+ else if (Style == wxITALIC && (Weight == wxNORMAL || Weight == wxLIGHT))
+ {
+ if (m_font.GetFamily () == wxROMAN)
+ style = "-Italic";
+ else
+ style = "-Oblique";
+ }
+ else if (Style == wxITALIC && Weight == wxBOLD)
+ {
+ if (m_font.GetFamily () == wxROMAN)
+ style = "-BoldItalic";
+ else
+ style = "-BoldOblique";
+ }
+ else if (Style == wxSLANT && (Weight == wxNORMAL || Weight == wxLIGHT))
+ {
+ if (m_font.GetFamily () == wxROMAN)
+ style = "-Italic";
+ else
+ style = "-Oblique";
+ }
+ else if (Style == wxSLANT && Weight == wxBOLD)
+ {
+ if (m_font.GetFamily () == wxROMAN)
+ style = "-BoldItalic";
+ else
+ style = "-BoldOblique";
+ }
+ else
+ {
+ style = "";
+ }
+
+ char buffer[100];
+ strcpy( buffer, name );
+ strcat( buffer, style );
+
+ fprintf( m_pstream, buffer );
+ fprintf( m_pstream, " reencodeISO def\n" );
+ fprintf( m_pstream, buffer );
+ fprintf( m_pstream, " findfont\n" );
+
+ fprintf( m_pstream, "%f scalefont setfont\n", YLOG2DEVREL(m_font.GetPointSize() * 1000) / 1000.0F);
+ // this is a hack - we must scale font size (in pts) according to m_scaleY but
+ // YLOG2DEVREL works with wxCoord type (int or longint). Se we first convert font size
+ // to 1/1000th of pt and then back.
}
void wxPostScriptDC::SetPen( const wxPen& pen )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (!pen.Ok()) return;
-
+
int oldStyle = m_pen.GetStyle();
m_pen = pen;
- *m_pstream << XLOG2DEVREL(m_pen.GetWidth()) << " setlinewidth\n";
-
+ #ifdef __WXMSW__
+ fprintf( m_pstream, "%d setlinewidth\n", XLOG2DEVREL(m_pen.GetWidth()) );
+ #else
+ fprintf( m_pstream, "%d setlinewidth\n", XLOG2DEVREL(m_pen.GetWidth()) );
+ #endif
/*
Line style - WRONG: 2nd arg is OFFSET
-
+
Here, I'm afraid you do not conceive meaning of parameters of 'setdash'
operator correctly. You should look-up this in the Red Book: the 2nd parame-
ter is not number of values in the array of the first one, but an offset
into this description of the pattern. I mean a real *offset* not index
into array. I.e. If the command is [3 4] 1 setdash is used, then there
- will be first black line *2* units long, then space 4 units, then the
+ will be first black line *2* units wxCoord, then space 4 units, then the
pattern of *3* units black, 4 units space will be repeated.
*/
static const char *dotted = "[2 5] 2";
static const char *short_dashed = "[4 4] 2";
- static const char *long_dashed = "[4 8] 2";
+ static const char *wxCoord_dashed = "[4 8] 2";
static const char *dotted_dashed = "[6 6 2 6] 4";
const char *psdash = (char *) NULL;
- switch (m_pen.GetStyle ())
+ switch (m_pen.GetStyle())
{
case wxDOT: psdash = dotted; break;
case wxSHORT_DASH: psdash = short_dashed; break;
- case wxLONG_DASH: psdash = long_dashed; break;
+ case wxLONG_DASH: psdash = wxCoord_dashed; break;
case wxDOT_DASH: psdash = dotted_dashed; break;
case wxSOLID:
case wxTRANSPARENT:
default: psdash = "[] 0"; break;
}
-
+
if (oldStyle != m_pen.GetStyle())
{
- *m_pstream << psdash << " setdash\n";
+ fprintf( m_pstream, psdash );
+ fprintf( m_pstream," setdash\n" );
}
// Line colour
if (!m_colour)
{
// Anything not white is black
- if (!(red == (unsigned char) 255 && blue == (unsigned char) 255
- && green == (unsigned char) 255))
- {
- red = (unsigned char) 0;
- green = (unsigned char) 0;
- blue = (unsigned char) 0;
- }
-
- // setgray here ?
+ if (! (red == (unsigned char) 255 &&
+ blue == (unsigned char) 255 &&
+ green == (unsigned char) 255) )
+ {
+ red = (unsigned char) 0;
+ green = (unsigned char) 0;
+ blue = (unsigned char) 0;
+ }
+ // setgray here ?
}
if (!(red == m_currentRed && green == m_currentGreen && blue == m_currentBlue))
{
- long redPS = (long) (((int) red) / 255.0);
- long bluePS = (long) (((int) blue) / 255.0);
- long greenPS = (long) (((int) green) / 255.0);
+ double redPS = (double)(red) / 255.0;
+ double bluePS = (double)(blue) / 255.0;
+ double greenPS = (double)(green) / 255.0;
- *m_pstream << redPS << " " << greenPS << " " << bluePS << " setrgbcolor\n";
+ fprintf( m_pstream,
+ "%.8f %.8f %.8f setrgbcolor\n",
+ redPS, greenPS, bluePS );
- m_currentRed = red;
- m_currentBlue = blue;
- m_currentGreen = green;
+ m_currentRed = red;
+ m_currentBlue = blue;
+ m_currentGreen = green;
}
}
void wxPostScriptDC::SetBrush( const wxBrush& brush )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (!brush.Ok()) return;
-
+
m_brush = brush;
// Brush colour
- unsigned char red = m_brush.GetColour ().Red ();
- unsigned char blue = m_brush.GetColour ().Blue ();
- unsigned char green = m_brush.GetColour ().Green ();
+ unsigned char red = m_brush.GetColour().Red();
+ unsigned char blue = m_brush.GetColour().Blue();
+ unsigned char green = m_brush.GetColour().Green();
if (!m_colour)
{
- // Anything not black is white
- if (!(red == (unsigned char) 0 && blue == (unsigned char) 0
- && green == (unsigned char) 0))
- {
- red = (unsigned char) 255;
- green = (unsigned char) 255;
- blue = (unsigned char) 255;
- }
-
- // setgray here ?
+ // Anything not white is black
+ if (! (red == (unsigned char) 255 &&
+ blue == (unsigned char) 255 &&
+ green == (unsigned char) 255) )
+ {
+ red = (unsigned char) 0;
+ green = (unsigned char) 0;
+ blue = (unsigned char) 0;
+ }
+ // setgray here ?
}
if (!(red == m_currentRed && green == m_currentGreen && blue == m_currentBlue))
{
- long redPS = (long) (((int) red) / 255.0);
- long bluePS = (long) (((int) blue) / 255.0);
- long greenPS = (long) (((int) green) / 255.0);
- *m_pstream << redPS << " " << greenPS << " " << bluePS << " setrgbcolor\n";
- m_currentRed = red;
- m_currentBlue = blue;
- m_currentGreen = green;
+ double redPS = (double)(red) / 255.0;
+ double bluePS = (double)(blue) / 255.0;
+ double greenPS = (double)(green) / 255.0;
+
+ fprintf( m_pstream,
+ "%.8f %.8f %.8f setrgbcolor\n",
+ redPS, greenPS, bluePS );
+
+ m_currentRed = red;
+ m_currentBlue = blue;
+ m_currentGreen = green;
}
}
-void wxPostScriptDC::DrawText( const wxString& text, long x, long y, bool WXUNUSED(use16bit) )
+void wxPostScriptDC::DoDrawText( const wxString& text, wxCoord x, wxCoord y )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
+ wxCoord text_w, text_h, text_descent;
+
+ GetTextExtent(text, &text_w, &text_h, &text_descent);
+
SetFont( m_font );
- if (m_textForegroundColour.Ok ())
+ if (m_textForegroundColour.Ok())
{
- unsigned char red = m_textForegroundColour.Red ();
- unsigned char blue = m_textForegroundColour.Blue ();
- unsigned char green = m_textForegroundColour.Green ();
+ unsigned char red = m_textForegroundColour.Red();
+ unsigned char blue = m_textForegroundColour.Blue();
+ unsigned char green = m_textForegroundColour.Green();
if (!m_colour)
- {
- // Anything not white is black
- if (!(red == (unsigned char) 255 && blue == (unsigned char) 255
- && green == (unsigned char) 255))
- {
- red = (unsigned char) 0;
- green = (unsigned char) 0;
- blue = (unsigned char) 0;
- }
- }
-
- // maybe setgray here ?
-
+ {
+ // Anything not white is black
+ if (! (red == (unsigned char) 255 &&
+ blue == (unsigned char) 255 &&
+ green == (unsigned char) 255))
+ {
+ red = (unsigned char) 0;
+ green = (unsigned char) 0;
+ blue = (unsigned char) 0;
+ }
+ }
+
+ // maybe setgray here ?
if (!(red == m_currentRed && green == m_currentGreen && blue == m_currentBlue))
{
- long redPS = (long) (((int) red) / 255.0);
- long bluePS = (long) (((int) blue) / 255.0);
- long greenPS = (long) (((int) green) / 255.0);
- *m_pstream << redPS << " " << greenPS << " " << bluePS << " setrgbcolor\n";
+ double redPS = (double)(red) / 255.0;
+ double bluePS = (double)(blue) / 255.0;
+ double greenPS = (double)(green) / 255.0;
+
+ fprintf( m_pstream,
+ "%.8f %.8f %.8f setrgbcolor\n",
+ redPS, greenPS, bluePS );
m_currentRed = red;
m_currentBlue = blue;
int size = m_font.GetPointSize();
- long by = y + (long)floor( float(size) * 2.0 / 3.0 ); // approximate baseline
- *m_pstream << XLOG2DEV(x) << " " << YLOG2DEV(by) << " moveto\n";
-
- *m_pstream << "(";
- int len = strlen ((char *)(const char *)text);
+// wxCoord by = y + (wxCoord)floor( double(size) * 2.0 / 3.0 ); // approximate baseline
+// commented by V. Slavik and replaced by accurate version
+// - note that there is still rounding error in text_descent!
+ wxCoord by = y + size - text_descent; // baseline
+ fprintf( m_pstream, "%d %d moveto\n", XLOG2DEV(x), YLOG2DEV(by) );
+
+ /* I don't know how to write char to a stream, so I use a mini string */
+ char tmpbuf[2];
+ tmpbuf[1] = 0;
+
+ fprintf( m_pstream, "(" );
+ const wxWX2MBbuf textbuf = text.mb_str();
+ int len = strlen(textbuf);
int i;
for (i = 0; i < len; i++)
{
- int c = (unsigned char) text[i];
- if ( c == ')' || c == '(' || c == '\\')
+ int c = (unsigned char) textbuf[i];
+ if (c == ')' || c == '(' || c == '\\')
{
- *m_pstream << "\\" << (char) c;
+ /* Cope with special characters */
+ fprintf( m_pstream, "\\" );
+ tmpbuf[0] = (char) c;
+ fprintf( m_pstream, tmpbuf );
}
else if ( c >= 128 )
{
- // Cope with character codes > 127
- char tmp[5];
- sprintf(tmp, "\\%o", c);
- *m_pstream << tmp;
+ /* Cope with character codes > 127 */
+ fprintf(m_pstream, "\\%o", c);
}
else
- *m_pstream << (char) c;
+ {
+ tmpbuf[0] = (char) c;
+ fprintf( m_pstream, tmpbuf );
+ }
}
- *m_pstream << ")" << " show\n";
+ fprintf( m_pstream, ") show\n" );
+
+ if (m_font.GetUnderlined())
+ {
+ wxCoord uy = (wxCoord)(y + size - m_underlinePosition);
+
+ fprintf( m_pstream,
+ "gsave\n"
+ "%d %d moveto\n"
+ "%d setlinewidth\n"
+ "%d %d lineto\n"
+ "stroke\n"
+ "grestore\n",
+ XLOG2DEV(x), YLOG2DEV(uy),
+ (wxCoord)m_underlineThickness,
+ XLOG2DEV(x + text_w), YLOG2DEV(uy) );
+ }
+
+ CalcBoundingBox( x, y );
+ CalcBoundingBox( x + size * text.Length() * 2/3 , y );
+}
+
+void wxPostScriptDC::DoDrawRotatedText( const wxString& text, wxCoord x, wxCoord y, double angle )
+{
+ if (angle == 0.0)
+ {
+ DoDrawText(text, x, y);
+ return;
+ }
+
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
+ SetFont( m_font );
+
+ if (m_textForegroundColour.Ok())
+ {
+ unsigned char red = m_textForegroundColour.Red();
+ unsigned char blue = m_textForegroundColour.Blue();
+ unsigned char green = m_textForegroundColour.Green();
+
+ if (!m_colour)
+ {
+ // Anything not white is black
+ if (! (red == (unsigned char) 255 &&
+ blue == (unsigned char) 255 &&
+ green == (unsigned char) 255))
+ {
+ red = (unsigned char) 0;
+ green = (unsigned char) 0;
+ blue = (unsigned char) 0;
+ }
+ }
+
+ // maybe setgray here ?
+ if (!(red == m_currentRed && green == m_currentGreen && blue == m_currentBlue))
+ {
+ double redPS = (double)(red) / 255.0;
+ double bluePS = (double)(blue) / 255.0;
+ double greenPS = (double)(green) / 255.0;
+
+ fprintf( m_pstream,
+ "%.8f %.8f %.8f setrgbcolor\n",
+ redPS, greenPS, bluePS );
+
+ m_currentRed = red;
+ m_currentBlue = blue;
+ m_currentGreen = green;
+ }
+ }
+
+ int size = m_font.GetPointSize();
+
+ long by = y + (long)floor( double(size) * 2.0 / 3.0 ); // approximate baseline
+
+ // FIXME only correct for 90 degrees
+ fprintf(m_pstream, "%d %d moveto\n", XLOG2DEV(x + size), YLOG2DEV(by) );
+ fprintf(m_pstream, "%.8f rotate\n", angle);
+
+ /* I don't know how to write char to a stream, so I use a mini string */
+ char tmpbuf[2];
+ tmpbuf[1] = 0;
+
+ fprintf( m_pstream, "(" );
+ const wxWX2MBbuf textbuf = text.mb_str();
+ int len = strlen(textbuf);
+ int i;
+ for (i = 0; i < len; i++)
+ {
+ int c = (unsigned char) textbuf[i];
+ if (c == ')' || c == '(' || c == '\\')
+ {
+ /* Cope with special characters */
+ fprintf( m_pstream, "\\" );
+ tmpbuf[0] = (char) c;
+ fprintf( m_pstream, tmpbuf );
+ }
+ else if ( c >= 128 )
+ {
+ /* Cope with character codes > 127 */
+ fprintf(m_pstream, "\\%o", c);
+ }
+ else
+ {
+ tmpbuf[0] = (char) c;
+ fprintf( m_pstream, tmpbuf );
+ }
+ }
+
+ fprintf( m_pstream, ") show\n" );
+ fprintf( m_pstream, "%.8f rotate\n", -angle );
if (m_font.GetUnderlined())
{
long uy = (long)(y + size - m_underlinePosition);
long w, h;
GetTextExtent(text, &w, &h);
-
- *m_pstream << "gsave " << XLOG2DEV(x) << " " << YLOG2DEV(uy)
- << " moveto\n"
- << (long)m_underlineThickness << " setlinewidth "
- << XLOG2DEV(x + w) << " " << YLOG2DEV(uy)
- << " lineto stroke grestore\n";
- }
-
+
+ fprintf( m_pstream,
+ "gsave\n"
+ "%d %d moveto\n"
+ "%ld setlinewidth\n"
+ "%d %d lineto\n"
+ "stroke\n"
+ "grestore\n",
+ XLOG2DEV(x), YLOG2DEV(uy),
+ (long)m_underlineThickness,
+ XLOG2DEV(x + w), YLOG2DEV(uy) );
+ }
+
CalcBoundingBox( x, y );
CalcBoundingBox( x + size * text.Length() * 2/3 , y );
}
-
void wxPostScriptDC::SetBackground (const wxBrush& brush)
{
m_backgroundBrush = brush;
void wxPostScriptDC::SetLogicalFunction (int WXUNUSED(function))
{
- wxFAIL_MSG( "wxPostScriptDC::SetLogicalFunction not implemented." );
+ wxFAIL_MSG( wxT("wxPostScriptDC::SetLogicalFunction not implemented.") );
}
-void wxPostScriptDC::DrawSpline( wxList *points )
+void wxPostScriptDC::DoDrawSpline( wxList *points )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
SetPen( m_pen );
double a, b, c, d, x1, y1, x2, y2, x3, y3;
wxNode *node = points->First();
p = (wxPoint *)node->Data();
- x1 = p->x;
+ x1 = p->x;
y1 = p->y;
node = node->Next();
p = (wxPoint *)node->Data();
- c = p->x;
+ c = p->x;
d = p->y;
x3 = a = (double)(x1 + c) / 2;
y3 = b = (double)(y1 + d) / 2;
- *m_pstream << "newpath "
- << XLOG2DEV((long)x1) << " " << YLOG2DEV((long)y1) << " moveto "
- << XLOG2DEV((long)x3) << " " << YLOG2DEV((long)y3) << " lineto\n";
-
- CalcBoundingBox( (long)x1, (long)y1 );
- CalcBoundingBox( (long)x3, (long)y3 );
+ fprintf( m_pstream,
+ "newpath\n"
+ "%d %d moveto\n"
+ "%d %d lineto\n",
+ XLOG2DEV((wxCoord)x1), YLOG2DEV((wxCoord)y1),
+ XLOG2DEV((wxCoord)x3), YLOG2DEV((wxCoord)y3) );
+
+ CalcBoundingBox( (wxCoord)x1, (wxCoord)y1 );
+ CalcBoundingBox( (wxCoord)x3, (wxCoord)y3 );
while ((node = node->Next()) != NULL)
{
q = (wxPoint *)node->Data();
- x1 = x3;
- y1 = y3;
- x2 = c;
- y2 = d;
- c = q->x;
- d = q->y;
+ x1 = x3;
+ y1 = y3;
+ x2 = c;
+ y2 = d;
+ c = q->x;
+ d = q->y;
x3 = (double)(x2 + c) / 2;
y3 = (double)(y2 + d) / 2;
- *m_pstream << XLOG2DEV((long)x1) << " " << YLOG2DEV((long)y1) << " "
- << XLOG2DEV((long)x2) << " " << YLOG2DEV((long)y2) << " "
- << XLOG2DEV((long)x3) << " " << YLOG2DEV((long)y3) << " DrawSplineSection\n";
- CalcBoundingBox( (long)x1, (long)y1 );
- CalcBoundingBox( (long)x3, (long)y3 );
+ fprintf( m_pstream,
+ "%d %d %d %d %d %d DrawSplineSection\n",
+ XLOG2DEV((wxCoord)x1), YLOG2DEV((wxCoord)y1),
+ XLOG2DEV((wxCoord)x2), YLOG2DEV((wxCoord)y2),
+ XLOG2DEV((wxCoord)x3), YLOG2DEV((wxCoord)y3) );
+
+ CalcBoundingBox( (wxCoord)x1, (wxCoord)y1 );
+ CalcBoundingBox( (wxCoord)x3, (wxCoord)y3 );
}
-
-/*
- At this point, (x2,y2) and (c,d) are the position of the
- next-to-last and last point respectively, in the point list
-*/
- *m_pstream << XLOG2DEV((long)c) << " " << YLOG2DEV((long)d) << " lineto stroke\n";
+ /*
+ At this point, (x2,y2) and (c,d) are the position of the
+ next-to-last and last point respectively, in the point list
+ */
+
+ fprintf( m_pstream,
+ "%d %d lineto\n"
+ "stroke\n",
+ XLOG2DEV((wxCoord)c), YLOG2DEV((wxCoord)d) );
}
-long wxPostScriptDC::GetCharWidth ()
+wxCoord wxPostScriptDC::GetCharWidth() const
{
// Chris Breeze: reasonable approximation using wxMODERN/Courier
- return (long) (GetCharHeight() * 72.0 / 120.0);
+ return (wxCoord) (GetCharHeight() * 72.0 / 120.0);
}
void wxPostScriptDC::SetAxisOrientation( bool xLeftRight, bool yBottomUp )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
m_signX = (xLeftRight ? 1 : -1);
m_signY = (yBottomUp ? 1 : -1);
-
+
+ // FIXME there is no such function in MSW nor in OS2/PM
+#if !defined(__WXMSW__) && !defined(__WXPM__)
ComputeScaleAndOrigin();
+#endif
}
-void wxPostScriptDC::SetDeviceOrigin( long x, long y )
+void wxPostScriptDC::SetDeviceOrigin( wxCoord x, wxCoord y )
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
int h = 0;
int w = 0;
GetSize( &w, &h );
-
+
wxDC::SetDeviceOrigin( x, h-y );
}
-void wxPostScriptDC::GetSize(int* width, int* height) const
+void wxPostScriptDC::DoGetSize(int* width, int* height) const
{
- const char *paperType = wxThePrintSetupData->GetPaperName();
-
- if (!paperType) paperType = _("A4 210 x 297 mm");
+ wxPaperSize id = m_printData.GetPaperId();
+
+ wxPrintPaperType *paper = wxThePrintPaperDatabase->FindPaperType(id);
- wxPrintPaperType *paper = wxThePrintPaperDatabase->FindPaperType(paperType);
-
- if (!paper) paper = wxThePrintPaperDatabase->FindPaperType(_("A4 210 x 297 mm"));
-
+ if (!paper) paper = wxThePrintPaperDatabase->FindPaperType(wxPAPER_A4);
+
+ int w = 595;
+ int h = 842;
if (paper)
{
- if (width) *width = paper->widthPixels;
- if (height) *height = paper->heightPixels;
+ w = paper->GetSizeDeviceUnits().x;
+ h = paper->GetSizeDeviceUnits().y;
}
- else
+
+ if (m_printData.GetOrientation() == wxLANDSCAPE)
{
- if (width) *width = 595;
- if (height) *height = 842;
+ int tmp = w;
+ w = h;
+ h = tmp;
}
+
+ if (width) *width = w;
+ if (height) *height = h;
}
-bool wxPostScriptDC::StartDoc (const wxString& message)
+void wxPostScriptDC::DoGetSizeMM(int *width, int *height) const
{
- wxCHECK_MSG( m_ok, FALSE, "invalid postscript dc" );
-
- if (m_filename == "")
+ wxPaperSize id = m_printData.GetPaperId();
+
+ wxPrintPaperType *paper = wxThePrintPaperDatabase->FindPaperType(id);
+
+ if (!paper) paper = wxThePrintPaperDatabase->FindPaperType(wxPAPER_A4);
+
+ int w = 210;
+ int h = 297;
+ if (paper)
{
- m_filename = wxGetTempFileName("ps");
- wxThePrintSetupData->SetPrinterFile((char *)(const char *)m_filename);
- m_ok = TRUE;
+ w = paper->GetWidth() / 10;
+ h = paper->GetHeight() / 10;
}
- else
+
+ if (m_printData.GetOrientation() == wxLANDSCAPE)
{
- wxThePrintSetupData->SetPrinterFile((char *)(const char *)m_filename);
+ int tmp = w;
+ w = h;
+ h = tmp;
}
- m_pstream = new ofstream (wxThePrintSetupData->GetPrinterFile());
-
- if (!m_pstream || !m_pstream->good())
+ if (width) *width = w;
+ if (height) *height = h;
+}
+
+// Resolution in pixels per logical inch
+wxSize wxPostScriptDC::GetPPI(void) const
+{
+ return wxSize(72, 72);
+}
+
+
+bool wxPostScriptDC::StartDoc( const wxString& message )
+{
+ wxCHECK_MSG( m_ok, FALSE, wxT("invalid postscript dc") );
+
+ if (m_printData.GetFilename() == "")
{
- wxMessageBox (_("Cannot open file!"), _("Error"), wxOK);
- m_ok = FALSE;
- return FALSE;
+ wxString filename = wxGetTempFileName("ps");
+ m_printData.SetFilename(filename);
+ }
+
+ m_pstream = fopen( m_printData.GetFilename().fn_str(), "w+" );
+
+ if (!m_pstream)
+ {
+ wxMessageBox( _("Cannot open file for PostScript printing!"), _("Error"), wxOK );
+ m_ok = FALSE;
+ return FALSE;
}
-
+
m_ok = TRUE;
+ fprintf( m_pstream, "%%%%BeginProlog\n" );
+ fprintf( m_pstream, wxPostScriptHeaderEllipse );
+ fprintf( m_pstream, wxPostScriptHeaderEllipticArc );
+ fprintf( m_pstream, wxPostScriptHeaderColourImage );
+ fprintf( m_pstream, wxPostScriptHeaderReencodeISO1 );
+ fprintf( m_pstream, wxPostScriptHeaderReencodeISO2 );
+ if (wxPostScriptHeaderSpline)
+ fprintf( m_pstream, wxPostScriptHeaderSpline );
+ fprintf( m_pstream, "%%%%EndProlog\n" );
+
SetBrush( *wxBLACK_BRUSH );
SetPen( *wxBLACK_PEN );
SetBackground( *wxWHITE_BRUSH );
// set origin according to paper size
SetDeviceOrigin( 0,0 );
-
+
wxPageNumber = 1;
m_pageNumber = 1;
m_title = message;
void wxPostScriptDC::EndDoc ()
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
if (m_clipping)
{
m_clipping = FALSE;
- *m_pstream << "grestore\n";
+ fprintf( m_pstream, "grestore\n" );
}
- if (m_pstream)
- {
- delete m_pstream;
- m_pstream = (ofstream *) NULL;
- }
+ fclose( m_pstream );
+ m_pstream = (FILE *) NULL;
- char *header_file = wxGetTempFileName("ps");
-
- m_pstream = new ofstream( header_file );
+ wxChar *header_file = wxGetTempFileName("ps");
- *m_pstream << "%!PS-Adobe-2.0\n"; /* PostScript magic strings */
- *m_pstream << "%%Title: " << (const char *) m_title << "\n";
- *m_pstream << "%%Creator: " << wxTheApp->argv[0] << "\n";
- *m_pstream << "%%CreationDate: " << wxNow() << "\n";
+ m_pstream = fopen( wxConvFile.cWX2MB(header_file) , "w+" );
- char userID[256];
+ fprintf( m_pstream, "%%!PS-Adobe-2.0\n" ); // PostScript magic strings
+ fprintf( m_pstream, "%%%%Title: %s\n", (const char *)m_title.mb_str() );
+ fprintf( m_pstream, "%%%%Creator: %s\n", (const char*)wxConvCurrent->cWX2MB(wxTheApp->argv[0]) );
+ fprintf( m_pstream, "%%%%CreationDate: %s\n", (const char *)wxNow().mb_str() );
+
+ wxChar userID[256];
if ( wxGetEmailAddress(userID, sizeof(userID)) )
{
- *m_pstream << "%%For: " << (char *)userID;
- char userName[245];
+ fprintf( m_pstream, "%%%%For: %s ", wxMBSTRINGCAST wxConvCurrent->cWX2MB(userID) );
+ wxChar userName[245];
if (wxGetUserName(userName, sizeof(userName)))
- *m_pstream << " (" << (char *)userName << ")";
- *m_pstream << "\n";
+ fprintf( m_pstream, " (%s)", wxMBSTRINGCAST wxConvCurrent->cWX2MB(userName) );
+ fprintf( m_pstream, "\n" );
}
else if ( wxGetUserName(userID, sizeof(userID)) )
{
- *m_pstream << "%%For: " << (char *)userID << "\n";
+ fprintf( m_pstream, "%%%%For: %s\n", wxMBSTRINGCAST wxConvCurrent->cWX2MB(userID) );;
}
// THE FOLLOWING HAS BEEN CONTRIBUTED BY Andy Fyfe <andy@hyperparallel.com>
- long wx_printer_translate_x, wx_printer_translate_y;
+ wxCoord wx_printer_translate_x, wx_printer_translate_y;
double wx_printer_scale_x, wx_printer_scale_y;
- wxThePrintSetupData->GetPrinterTranslation(&wx_printer_translate_x, &wx_printer_translate_y);
- wxThePrintSetupData->GetPrinterScaling(&wx_printer_scale_x, &wx_printer_scale_y);
- if (wxThePrintSetupData->GetPrinterOrientation() == PS_LANDSCAPE)
- {
- *m_pstream << "%%Orientation: Landscape\n";
- }
+ wx_printer_translate_x = (wxCoord)m_printData.GetPrinterTranslateX();
+ wx_printer_translate_y = (wxCoord)m_printData.GetPrinterTranslateY();
+
+ wx_printer_scale_x = m_printData.GetPrinterScaleX();
+ wx_printer_scale_y = m_printData.GetPrinterScaleY();
+
+ if (m_printData.GetOrientation() == wxLANDSCAPE)
+ fprintf( m_pstream, "%%%%Orientation: Landscape\n" );
else
- {
- *m_pstream << "%%Orientation: Portrait\n";
- }
+ fprintf( m_pstream, "%%%%Orientation: Portrait\n" );
// Compute the bounding box. Note that it is in the default user
// coordinate system, thus we have to convert the values.
- long llx = (long) ((XLOG2DEV(m_minX)+wx_printer_translate_x)*wx_printer_scale_x);
- long lly = (long) ((YLOG2DEV(m_minY)+wx_printer_translate_y)*wx_printer_scale_y);
- long urx = (long) ((XLOG2DEV(m_maxX)+wx_printer_translate_x)*wx_printer_scale_x);
- long ury = (long) ((YLOG2DEV(m_maxY)+wx_printer_translate_y)*wx_printer_scale_y);
+ wxCoord llx = (wxCoord) ((XLOG2DEV(m_minX)+wx_printer_translate_x)*wx_printer_scale_x);
+ wxCoord lly = (wxCoord) ((YLOG2DEV(m_minY)+wx_printer_translate_y)*wx_printer_scale_y);
+ wxCoord urx = (wxCoord) ((XLOG2DEV(m_maxX)+wx_printer_translate_x)*wx_printer_scale_x);
+ wxCoord ury = (wxCoord) ((YLOG2DEV(m_maxY)+wx_printer_translate_y)*wx_printer_scale_y);
// If we're landscape, our sense of "x" and "y" is reversed.
- if (wxThePrintSetupData->GetPrinterOrientation() == PS_LANDSCAPE)
+ if (m_printData.GetOrientation() == wxLANDSCAPE)
{
- long tmp;
+ wxCoord tmp;
tmp = llx; llx = lly; lly = tmp;
tmp = urx; urx = ury; ury = tmp;
// We need either the two lines that follow, or we need to subtract
// min_x from real_translate_y, which is commented out below.
- llx = llx - (long)(m_minX*wx_printer_scale_y);
- urx = urx - (long)(m_minX*wx_printer_scale_y);
+ llx = llx - (wxCoord)(m_minX*wx_printer_scale_y);
+ urx = urx - (wxCoord)(m_minX*wx_printer_scale_y);
}
// The Adobe specifications call for integers; we round as to make
// the bounding larger.
- *m_pstream << "%%BoundingBox: "
- << floor((double)llx) << " " << floor((double)lly) << " "
- << ceil((double)urx) << " " << ceil((double)ury) << "\n";
- *m_pstream << "%%Pages: " << (wxPageNumber - 1) << "\n";
- *m_pstream << "%%EndComments\n\n";
+ fprintf( m_pstream,
+ "%%%%BoundingBox: %d %d %d %d\n",
+ (wxCoord)floor((double)llx), (wxCoord)floor((double)lly),
+ (wxCoord)ceil((double)urx), (wxCoord)ceil((double)ury) );
+ fprintf( m_pstream, "%%%%Pages: %d\n", (wxPageNumber - 1) );
+ fprintf( m_pstream, "%%%%EndComments\n\n" );
// To check the correctness of the bounding box, postscript commands
// to draw a box corresponding to the bounding box are generated below.
// commands are generated within comments. These lines appear before any
// adjustment of scale, rotation, or translation, and hence are in the
// default user coordinates.
- *m_pstream << "% newpath\n";
- *m_pstream << "% " << llx << " " << lly << " moveto\n";
- *m_pstream << "% " << urx << " " << lly << " lineto\n";
- *m_pstream << "% " << urx << " " << ury << " lineto\n";
- *m_pstream << "% " << llx << " " << ury << " lineto closepath stroke\n";
-
- *m_pstream << "%%BeginProlog\n";
- *m_pstream << wxPostScriptHeaderEllipse;
- *m_pstream << wxPostScriptHeaderEllipticArc;
- *m_pstream << wxPostScriptHeaderColourImage;
- *m_pstream << wxPostScriptHeaderReencodeISO1;
- *m_pstream << wxPostScriptHeaderReencodeISO2;
+ fprintf( m_pstream, "%% newpath\n" );
+ fprintf( m_pstream, "%% %d %d moveto\n", llx, lly );
+ fprintf( m_pstream, "%% %d %d lineto\n", urx, lly );
+ fprintf( m_pstream, "%% %d %d lineto\n", urx, ury );
+ fprintf( m_pstream, "%% %d %d lineto closepath stroke\n", llx, ury );
- if (wxPostScriptHeaderSpline)
- *m_pstream << wxPostScriptHeaderSpline;
- *m_pstream << "%%EndProlog\n";
-
- delete m_pstream;
- m_pstream = (ofstream *) NULL;
+ fclose( m_pstream );
+ m_pstream = (FILE*) NULL;
- char *tmp_file = wxGetTempFileName("ps");
+ wxChar *tmp_file = wxGetTempFileName("ps");
// Paste header Before wx_printer_file
- wxConcatFiles (header_file, wxThePrintSetupData->GetPrinterFile(), tmp_file);
- wxRemoveFile (header_file);
- wxRemoveFile (wxThePrintSetupData->GetPrinterFile());
- wxRenameFile(tmp_file, wxThePrintSetupData->GetPrinterFile());
+ wxConcatFiles (header_file, m_printData.GetFilename(), tmp_file );
+ wxRemoveFile( header_file );
+ wxRemoveFile( m_printData.GetFilename() );
+ wxRenameFile( tmp_file, m_printData.GetFilename() );
#if defined(__X__) || defined(__WXGTK__)
- if (m_ok)
- {
- switch (wxThePrintSetupData->GetPrinterMode()) {
- case PS_PREVIEW:
- {
- char *argv[3];
- argv[0] = wxThePrintSetupData->GetPrintPreviewCommand();
- argv[1] = wxThePrintSetupData->GetPrinterFile();
- argv[2] = (char *) NULL;
- wxExecute (argv, TRUE);
- wxRemoveFile(wxThePrintSetupData->GetPrinterFile());
- }
- break;
-
- case PS_PRINTER:
- {
- char *argv[4];
- int argc = 0;
- argv[argc++] = wxThePrintSetupData->GetPrinterCommand();
-
- // !SM! If we simply assign to argv[1] here, if printer options
- // are blank, we get an annoying and confusing message from lpr.
- char * opts = wxThePrintSetupData->GetPrinterOptions();
- if (opts && *opts)
- argv[argc++] = opts;
-
- argv[argc++] = wxThePrintSetupData->GetPrinterFile();
- argv[argc++] = (char *) NULL;
- wxExecute (argv, TRUE);
- wxRemoveFile(wxThePrintSetupData->GetPrinterFile());
- }
- break;
-
- case PS_FILE:
- break;
- }
+ if (m_ok)
+ {
+ wxString previewCommand(m_printData.GetPreviewCommand());
+ wxString printerCommand(m_printData.GetPrinterCommand());
+ wxString printerOptions(m_printData.GetPrinterOptions());
+ wxString filename(m_printData.GetFilename());
+
+ switch (m_printData.GetPrintMode())
+ {
+ case wxPRINT_MODE_PREVIEW:
+ {
+ wxChar *argv[3];
+ argv[0] = WXSTRINGCAST previewCommand;
+ argv[1] = WXSTRINGCAST filename;
+ argv[2] = (wxChar*) NULL;
+ wxExecute( argv, TRUE );
+ wxRemoveFile( m_printData.GetFilename() );
+ }
+ break;
+ case wxPRINT_MODE_PRINTER:
+ {
+ wxChar *argv[4];
+ int argc = 0;
+ argv[argc++] = WXSTRINGCAST printerCommand;
+
+ // !SM! If we simply assign to argv[1] here, if printer options
+ // are blank, we get an annoying and confusing message from lpr.
+ wxChar *opts = WXSTRINGCAST printerOptions;
+ if (opts && *opts)
+ argv[argc++] = opts;
+
+ argv[argc++] = WXSTRINGCAST filename;
+ argv[argc++] = (wxChar *) NULL;
+ wxExecute( argv, TRUE );
+ wxRemoveFile( filename );
+ }
+ break;
+ case wxPRINT_MODE_FILE:
+ case wxPRINT_MODE_NONE:
+ break;
+ }
}
#endif
}
-void wxPostScriptDC::StartPage ()
+void wxPostScriptDC::StartPage()
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
- *m_pstream << "%%Page: " << (wxPageNumber++) << "\n";
-
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
+ fprintf( m_pstream, "%%%%Page: %d\n", wxPageNumber++ );
+
+ // What is this one supposed to do? RR.
// *m_pstream << "matrix currentmatrix\n";
// Added by Chris Breeze
- // Each page starts with an "initgraphics" which resets the
- // transformation and so we need to reset the origin
- // (and rotate the page for landscape printing)
-
-/*
- m_scaleFactor = 1.0;
- m_logicalOriginX = 0;
- m_logicalOriginY = 0;
-*/
+ // Each page starts with an "initgraphics" which resets the
+ // transformation and so we need to reset the origin
+ // (and rotate the page for landscape printing)
+
+ // Output scaling
+ wxCoord translate_x, translate_y;
+ double scale_x, scale_y;
+
+ translate_x = (wxCoord)m_printData.GetPrinterTranslateX();
+ translate_y = (wxCoord)m_printData.GetPrinterTranslateY();
- // Output scaling
- long translate_x, translate_y;
- double scale_x, scale_y;
- wxThePrintSetupData->GetPrinterTranslation(&translate_x, &translate_y);
- wxThePrintSetupData->GetPrinterScaling(&scale_x, &scale_y);
+ scale_x = m_printData.GetPrinterScaleX();
+ scale_y = m_printData.GetPrinterScaleY();
- if (wxThePrintSetupData->GetPrinterOrientation() == PS_LANDSCAPE)
- {
- translate_y -= m_maxY;
- *m_pstream << "90 rotate\n";
- }
+ if (m_printData.GetOrientation() == wxLANDSCAPE)
+ {
+ int h;
+ GetSize( (int*) NULL, &h );
+ translate_y -= h;
+ fprintf( m_pstream, "90 rotate\n" );
+
+ // I copied this one from a PostScript tutorial, but to no avail. RR.
+ // fprintf( m_pstream, "90 rotate llx neg ury nef translate\n" );
+ }
- *m_pstream << scale_x << " " << scale_y << " scale\n";
- *m_pstream << translate_x << " " << translate_y << " translate\n";
+ fprintf( m_pstream, "%.8f %.8f scale\n", scale_x, scale_y );
+ fprintf( m_pstream, "%d %d translate\n", translate_x, translate_y );
}
void wxPostScriptDC::EndPage ()
{
- wxCHECK_RET( m_ok && m_pstream, "invalid postscript dc" );
-
- *m_pstream << "showpage\n";
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+
+ fprintf( m_pstream, "showpage\n" );
}
-bool wxPostScriptDC::Blit( long WXUNUSED(xdest), long WXUNUSED(ydest),
- long WXUNUSED(fwidth), long WXUNUSED(fheight),
- wxDC *WXUNUSED(source),
- long WXUNUSED(xsrc), long WXUNUSED(ysrc),
- int WXUNUSED(rop), bool WXUNUSED(useMask) )
+bool wxPostScriptDC::DoBlit( wxCoord xdest, wxCoord ydest,
+ wxCoord fwidth, wxCoord fheight,
+ wxDC *source,
+ wxCoord xsrc, wxCoord ysrc,
+ int rop, bool WXUNUSED(useMask) )
{
- wxCHECK_MSG( m_ok && m_pstream, FALSE, "invalid postscript dc" );
-
- wxFAIL_MSG( "wxPostScriptDC::Blit no yet implemented." );
-
+ wxCHECK_MSG( m_ok && m_pstream, FALSE, wxT("invalid postscript dc") );
+
+ wxCHECK_MSG( source, FALSE, wxT("invalid source dc") );
+
+ /* blit into a bitmap */
+ wxBitmap bitmap( (int)fwidth, (int)fheight );
+ wxMemoryDC memDC;
+ memDC.SelectObject(bitmap);
+ memDC.Blit(0, 0, fwidth, fheight, source, xsrc, ysrc, rop); /* TODO: Blit transparently? */
+ memDC.SelectObject(wxNullBitmap);
+
+ /* draw bitmap. scaling and positioning is done there */
+ DrawBitmap( bitmap, xdest, ydest );
+
return TRUE;
}
-long wxPostScriptDC::GetCharHeight ()
+wxCoord wxPostScriptDC::GetCharHeight() const
{
if (m_font.Ok())
return m_font.GetPointSize();
return 12;
}
-void wxPostScriptDC::GetTextExtent (const wxString& string, long *x, long *y,
- long *descent, long *externalLeading, wxFont *theFont,
- bool WXUNUSED(use16))
-{
-// if (!m_pstream) return;
-
- wxFont *fontToUse = theFont;
-
- if (!fontToUse) fontToUse = (wxFont*) &m_font;
-
-#if !USE_AFM_FOR_POSTSCRIPT
- // Provide a VERY rough estimate (avoid using it)
- // Chris Breeze 5/11/97: produces accurate results for mono-spaced
- // font such as Courier (aka wxMODERN)
- int height = 12;
- if (fontToUse)
- {
- height = fontToUse->GetPointSize();
- }
- *x = strlen (string) * height * 72 / 120;
- *y = (long) (height * 1.32); // allow for descender
-
- if (descent)
- *descent = 0;
- if (externalLeading)
- *externalLeading = 0;
+void wxPostScriptDC::DoGetTextExtent(const wxString& string,
+ wxCoord *x, wxCoord *y,
+ wxCoord *descent, wxCoord *externalLeading,
+ wxFont *theFont ) const
+{
+ wxFont *fontToUse = theFont;
+
+ if (!fontToUse) fontToUse = (wxFont*) &m_font;
+
+ wxCHECK_RET( fontToUse, wxT("GetTextExtent: no font defined") );
+ wxCHECK_RET( x, wxT("GetTextExtent: x == NULL") );
+ wxCHECK_RET( y, wxT("GetTextExtent: y == NULL") );
+
+ const wxWX2MBbuf strbuf = string.mb_str();
+
+#if !wxUSE_AFM_FOR_POSTSCRIPT
+ /* Provide a VERY rough estimate (avoid using it).
+ * Produces accurate results for mono-spaced font
+ * such as Courier (aka wxMODERN) */
+
+ int height = 12;
+ if (fontToUse)
+ {
+ height = fontToUse->GetPointSize();
+ }
+ if ( x )
+ *x = strlen (strbuf) * height * 72 / 120;
+ if ( y )
+ *y = (wxCoord) (height * 1.32); /* allow for descender */
+ if (descent) *descent = 0;
+ if (externalLeading) *externalLeading = 0;
#else
- // +++++ start of contributed code +++++
-
- // ************************************************************
- // method for calculating string widths in postscript:
- // read in the AFM (adobe font metrics) file for the
- // actual font, parse it and extract the character widths
- // and also the descender. this may be improved, but for now
- // it works well. the AFM file is only read in if the
- // font is changed. this may be chached in the future.
- // calls to GetTextExtent with the font unchanged are rather
- // efficient!!!
- //
- // for each font and style used there is an AFM file necessary.
- // currently i have only files for the roman font family.
- // i try to get files for the other ones!
- //
- // CAVE: the size of the string is currently always calculated
- // in 'points' (1/72 of an inch). this should later on be
- // changed to depend on the mapping mode.
- // CAVE: the path to the AFM files must be set before calling this
- // function. this is usually done by a call like the following:
- // wxSetAFMPath("d:\\wxw161\\afm\\");
- //
- // example:
- //
- // wxPostScriptDC dc(NULL, TRUE);
- // if (dc.Ok()){
- // wxSetAFMPath("d:\\wxw161\\afm\\");
- // dc.StartDoc("Test");
- // dc.StartPage();
- // long w,h;
- // dc.SetFont(new wxFont(10, wxROMAN, wxNORMAL, wxNORMAL));
- // dc.GetTextExtent("Hallo",&w,&h);
- // dc.EndPage();
- // dc.EndDoc();
- // }
- //
- // by steve (stefan.hammes@urz.uni-heidelberg.de)
- // created: 10.09.94
- // updated: 14.05.95
-
- assert(fontToUse && "void wxPostScriptDC::GetTextExtent: no font defined");
- assert(x && "void wxPostScriptDC::GetTextExtent: x == NULL");
- assert(y && "void wxPostScriptDC::GetTextExtent: y == NULL");
-
- // these static vars are for storing the state between calls
- static int lastFamily= INT_MIN;
- static int lastSize= INT_MIN;
- static int lastStyle= INT_MIN;
- static int lastWeight= INT_MIN;
- static int lastDescender = INT_MIN;
- static int lastWidths[256]; // widths of the characters
-
- // get actual parameters
- const int Family = fontToUse->GetFamily();
- const int Size = fontToUse->GetPointSize();
- const int Style = fontToUse->GetStyle();
- const int Weight = fontToUse->GetWeight();
-
- // if we have another font, read the font-metrics
- if(Family!=lastFamily||Size!=lastSize||Style!=lastStyle||Weight!=lastWeight){
- // store actual values
- lastFamily = Family;
- lastSize = Size;
- lastStyle = Style;
- lastWeight = Weight;
-
- // read in new font metrics **************************************
-
- // 1. construct filename ******************************************
- /* MATTHEW: [2] Use wxTheFontNameDirectory */
- const char *name;
- // Julian - we'll need to do this a different way now we've removed the
- // font directory system. Must find Stefan's original code.
-
- name = wxTheFontNameDirectory->GetAFMName(Family, Weight, Style);
- if (!name)
- name = "unknown";
-
- // get the directory of the AFM files
- char afmName[256];
- afmName[0] = 0;
- if (wxGetAFMPath())
- strcpy(afmName,wxGetAFMPath());
-
- // 2. open and process the file **********************************
-
- // a short explanation of the AFM format:
- // we have for each character a line, which gives its size
- // e.g.:
- //
- // C 63 ; WX 444 ; N question ; B 49 -14 395 676 ;
- //
- // that means, we have a character with ascii code 63, and width
- // (444/1000 * fontSize) points.
- // the other data is ignored for now!
- //
- // when the font has changed, we read in the right AFM file and store the
- // character widths in an array, which is processed below (see point 3.).
-
- // new elements JC Sun Aug 25 23:21:44 MET DST 1996
-
-
- strcat(afmName,name);
- strcat(afmName,".afm");
- FILE *afmFile = fopen(afmName,"r");
- if(afmFile==NULL){
- wxLogDebug("GetTextExtent: can't open AFM file '%s'\n",afmName);
- wxLogDebug(" using approximate values\n");
- int i;
- for (i=0; i<256; i++) lastWidths[i] = 500; // an approximate value
- lastDescender = -150; // dito.
- }else{
- int i;
- // init the widths array
- for(i=0; i<256; i++) lastWidths[i]= INT_MIN;
- // some variables for holding parts of a line
- char cString[10],semiString[10],WXString[10],descString[20];
- char upString[30], utString[30], encString[50];
- char line[256];
- int ascii,cWidth;
- // read in the file and parse it
- while(fgets(line,sizeof(line),afmFile)!=NULL){
- // A.) check for descender definition
- if(strncmp(line,"Descender",9)==0){
- if((sscanf(line,"%s%d",descString,&lastDescender)!=2)
- || (strcmp(descString,"Descender")!=0)) {
- wxLogDebug("AFM-file '%s': line '%s' has error (bad descender)\n",
- afmName,line);
- }
- }
- // JC 1.) check for UnderlinePosition
- else if(strncmp(line,"UnderlinePosition",17)==0){
- if((sscanf(line,"%s%lf",upString,&UnderlinePosition)!=2)
- || (strcmp(upString,"UnderlinePosition")!=0)) {
- wxLogDebug("AFM-file '%s': line '%s' has error (bad UnderlinePosition)\n",
- afmName,line);
- }
+ /* method for calculating string widths in postscript:
+ / read in the AFM (adobe font metrics) file for the
+ / actual font, parse it and extract the character widths
+ / and also the descender. this may be improved, but for now
+ / it works well. the AFM file is only read in if the
+ / font is changed. this may be chached in the future.
+ / calls to GetTextExtent with the font unchanged are rather
+ / efficient!!!
+ /
+ / for each font and style used there is an AFM file necessary.
+ / currently i have only files for the roman font family.
+ / I try to get files for the other ones!
+ /
+ / CAVE: the size of the string is currently always calculated
+ / in 'points' (1/72 of an inch). this should later on be
+ / changed to depend on the mapping mode.
+ / CAVE: the path to the AFM files must be set before calling this
+ / function. this is usually done by a call like the following:
+ / wxSetAFMPath("d:\\wxw161\\afm\\");
+ /
+ / example:
+ /
+ / wxPostScriptDC dc(NULL, TRUE);
+ / if (dc.Ok()){
+ / wxSetAFMPath("d:\\wxw161\\afm\\");
+ / dc.StartDoc("Test");
+ / dc.StartPage();
+ / wxCoord w,h;
+ / dc.SetFont(new wxFont(10, wxROMAN, wxNORMAL, wxNORMAL));
+ / dc.GetTextExtent("Hallo",&w,&h);
+ / dc.EndPage();
+ / dc.EndDoc();
+ / }
+ /
+ / by steve (stefan.hammes@urz.uni-heidelberg.de)
+ / created: 10.09.94
+ / updated: 14.05.95 */
+
+ /* these static vars are for storing the state between calls */
+ static int lastFamily= INT_MIN;
+ static int lastSize= INT_MIN;
+ static int lastStyle= INT_MIN;
+ static int lastWeight= INT_MIN;
+ static int lastDescender = INT_MIN;
+ static int lastWidths[256]; /* widths of the characters */
+
+ double UnderlinePosition = 0.0;
+ double UnderlineThickness = 0.0;
+
+ /* get actual parameters */
+ const int Family = fontToUse->GetFamily();
+ const int Size = fontToUse->GetPointSize();
+ const int Style = fontToUse->GetStyle();
+ const int Weight = fontToUse->GetWeight();
+
+ /* if we have another font, read the font-metrics */
+ if (Family!=lastFamily || Size!=lastSize || Style!=lastStyle || Weight!=lastWeight)
+ {
+ /* store actual values */
+ lastFamily = Family;
+ lastSize = Size;
+ lastStyle = Style;
+ lastWeight = Weight;
+
+ char *name = (char*) NULL;
+
+ switch (Family)
+ {
+ case wxMODERN:
+ {
+ if ((Style == wxITALIC) && (Weight == wxBOLD)) name = "CourBoO";
+ else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = "CourBo";
+ else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = "CourO";
+ else name = "Cour";
+ }
+ break;
+ case wxROMAN:
+ {
+ if ((Style == wxITALIC) && (Weight == wxBOLD)) name = "TimesBoO";
+ else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = "TimesBo";
+ else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = "TimesO";
+ else name = "TimesRo";
+ }
+ break;
+ default:
+ {
+ if ((Style == wxITALIC) && (Weight == wxBOLD)) name = "HelvBoO";
+ else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = "HelvBo";
+ else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = "HelvO";
+ else name = "Helv";
+ }
+ break;
}
- // JC 2.) check for UnderlineThickness
- else if(strncmp(line,"UnderlineThickness",18)==0){
- if((sscanf(line,"%s%lf",utString,&UnderlineThickness)!=2)
- || (strcmp(utString,"UnderlineThickness")!=0)) {
- wxLogDebug("AFM-file '%s': line '%s' has error (bad UnderlineThickness)\n",
- afmName,line);
- }
+
+ /* get the directory of the AFM files */
+ wxString afmName = wxEmptyString;
+ if (!m_printData.GetFontMetricPath().IsEmpty())
+ {
+ afmName = m_printData.GetFontMetricPath();
}
- // JC 3.) check for EncodingScheme
- else if(strncmp(line,"EncodingScheme",14)==0){
- if((sscanf(line,"%s%s",utString,encString)!=2)
- || (strcmp(utString,"EncodingScheme")!=0)) {
- wxLogDebug("AFM-file '%s': line '%s' has error (bad EncodingScheme)\n",
- afmName,line);
- }
- else if (strncmp(encString, "AdobeStandardEncoding", 21))
- {
- wxLogDebug("AFM-file '%s': line '%s' has error (unsupported EncodingScheme %s)\n",
- afmName,line, encString);
- }
+
+ /* 2. open and process the file
+ / a short explanation of the AFM format:
+ / we have for each character a line, which gives its size
+ / e.g.:
+ /
+ / C 63 ; WX 444 ; N question ; B 49 -14 395 676 ;
+ /
+ / that means, we have a character with ascii code 63, and width
+ / (444/1000 * fontSize) points.
+ / the other data is ignored for now!
+ /
+ / when the font has changed, we read in the right AFM file and store the
+ / character widths in an array, which is processed below (see point 3.). */
+
+ /* new elements JC Sun Aug 25 23:21:44 MET DST 1996 */
+
+ afmName << name << wxT(".afm");
+ FILE *afmFile = wxFopen(afmName,wxT("r"));
+ if (afmFile==NULL)
+ {
+ afmName = wxThePrintSetupData->GetAFMPath();
+ afmName << wxFILE_SEP_PATH << name << wxT(".afm");
+ afmFile = wxFopen(afmName,wxT("r"));
}
- // B.) check for char-width
- else if(strncmp(line,"C ",2)==0){
- if(sscanf(line,"%s%d%s%s%d",
- cString,&ascii,semiString,WXString,&cWidth)!=5){
- wxLogDebug("AFM-file '%s': line '%s' has an error (bad character width)\n",afmName,line);
- }
- if(strcmp(cString,"C")!=0 || strcmp(semiString,";")!=0 ||
- strcmp(WXString,"WX")!=0){
- wxLogDebug("AFM-file '%s': line '%s' has a format error\n",afmName,line);
- }
- //printf(" char '%c'=%d has width '%d'\n",ascii,ascii,cWidth);
- if(ascii>=0 && ascii<256){
- lastWidths[ascii] = cWidth; // store width
- }else{
- /* MATTHEW: this happens a lot; don't print an error */
- // wxLogDebug("AFM-file '%s': ASCII value %d out of range\n",afmName,ascii);
- }
+
+#ifdef __UNIX__
+#ifndef __VMS__
+ if (afmFile==NULL)
+ /* please do NOT change the line above to "else if (afmFile==NULL)" -
+ - afmFile = fopen() may fail and in that case the next if branch
+ MUST be executed - and it would not if there was "else" */
+ {
+ afmName = wxINSTALL_PREFIX;
+ afmName << wxFILE_SEP_PATH
+ << wxT("share") << wxFILE_SEP_PATH
+ << wxT("wx") << wxFILE_SEP_PATH
+ << wxT("afm") << wxFILE_SEP_PATH
+ << name << wxT(".afm");
+ afmFile = wxFopen(afmName,wxT("r"));
}
- // C.) ignore other entries.
- }
- fclose(afmFile);
- }
- // hack to compute correct values for german 'Umlaute'
- // the correct way would be to map the character names
- // like 'adieresis' to corresp. positions of ISOEnc and read
- // these values from AFM files, too. Maybe later ...
- lastWidths[196] = lastWidths['A']; // Ä
- lastWidths[228] = lastWidths['a']; // ä
- lastWidths[214] = lastWidths['O']; // Ö
- lastWidths[246] = lastWidths['o']; // ö
- lastWidths[220] = lastWidths['U']; // Ü
- lastWidths[252] = lastWidths['u']; // ü
- lastWidths[223] = lastWidths[251]; // ß
- }
+#endif
+#endif
- // JC: calculate UnderlineThickness/UnderlinePosition
- m_underlinePosition = m_underlinePosition * fontToUse->GetPointSize() / 1000.0f;
- m_underlineThickness = m_underlineThickness * fontToUse->GetPointSize() / 1000.0f * m_scaleFactor;
-
- // 3. now the font metrics are read in, calc size *******************
- // this is done by adding the widths of the characters in the
- // string. they are given in 1/1000 of the size!
-
- long widthSum=0;
- long height=Size; // by default
- unsigned char *p;
- for(p=(unsigned char *)(const char *)string; *p; p++){
- if(lastWidths[*p]== INT_MIN){
- wxLogDebug("GetTextExtent: undefined width for character '%c' (%d)\n",
- *p,*p);
- widthSum += (long)(lastWidths[' ']/1000.0F * Size); // assume space
- }else{
- widthSum += (long)((lastWidths[*p]/1000.0F)*Size);
+ if (afmFile==NULL)
+ {
+ wxLogDebug( wxT("GetTextExtent: can't open AFM file '%hs'\n"), afmName.c_str() );
+ wxLogDebug( wxT(" using approximate values\n"));
+ for (int i=0; i<256; i++) lastWidths[i] = 500; /* an approximate value */
+ lastDescender = -150; /* dito. */
+ }
+ else
+ {
+ /* init the widths array */
+ for(int i=0; i<256; i++) lastWidths[i] = INT_MIN;
+ /* some variables for holding parts of a line */
+ char cString[10],semiString[10],WXString[10],descString[20];
+ char upString[30], utString[30], encString[50];
+ char line[256];
+ int ascii,cWidth;
+ /* read in the file and parse it */
+ while(fgets(line,sizeof(line),afmFile)!=NULL)
+ {
+ /* A.) check for descender definition */
+ if (strncmp(line,"Descender",9)==0)
+ {
+ if ((sscanf(line,"%s%d",descString,&lastDescender)!=2) ||
+ (strcmp(descString,"Descender")!=0))
+ {
+ wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad descender)\n"), afmName.c_str(),line );
+ }
+ }
+ /* JC 1.) check for UnderlinePosition */
+ else if(strncmp(line,"UnderlinePosition",17)==0)
+ {
+ if ((sscanf(line,"%s%lf",upString,&UnderlinePosition)!=2) ||
+ (strcmp(upString,"UnderlinePosition")!=0))
+ {
+ wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad UnderlinePosition)\n"), afmName.c_str(), line );
+ }
+ }
+ /* JC 2.) check for UnderlineThickness */
+ else if(strncmp(line,"UnderlineThickness",18)==0)
+ {
+ if ((sscanf(line,"%s%lf",utString,&UnderlineThickness)!=2) ||
+ (strcmp(utString,"UnderlineThickness")!=0))
+ {
+ wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad UnderlineThickness)\n"), afmName.c_str(), line );
+ }
+ }
+ /* JC 3.) check for EncodingScheme */
+ else if(strncmp(line,"EncodingScheme",14)==0)
+ {
+ if ((sscanf(line,"%s%s",utString,encString)!=2) ||
+ (strcmp(utString,"EncodingScheme")!=0))
+ {
+ wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad EncodingScheme)\n"), afmName.c_str(), line );
+ }
+ else if (strncmp(encString, "AdobeStandardEncoding", 21))
+ {
+ wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (unsupported EncodingScheme %hs)\n"),
+ afmName.c_str(),line, encString);
+ }
+ }
+ /* B.) check for char-width */
+ else if(strncmp(line,"C ",2)==0)
+ {
+ if (sscanf(line,"%s%d%s%s%d",cString,&ascii,semiString,WXString,&cWidth)!=5)
+ {
+ wxLogDebug(wxT("AFM-file '%hs': line '%hs' has an error (bad character width)\n"),afmName.c_str(),line);
+ }
+ if(strcmp(cString,"C")!=0 || strcmp(semiString,";")!=0 || strcmp(WXString,"WX")!=0)
+ {
+ wxLogDebug(wxT("AFM-file '%hs': line '%hs' has a format error\n"),afmName.c_str(),line);
+ }
+ /* printf(" char '%c'=%d has width '%d'\n",ascii,ascii,cWidth); */
+ if (ascii>=0 && ascii<256)
+ {
+ lastWidths[ascii] = cWidth; /* store width */
+ }
+ else
+ {
+ /* MATTHEW: this happens a lot; don't print an error */
+ /* wxLogDebug("AFM-file '%s': ASCII value %d out of range\n",afmName.c_str(),ascii); */
+ }
+ }
+ /* C.) ignore other entries. */
+ }
+ fclose(afmFile);
+ }
+ /* hack to compute correct values for german 'Umlaute'
+ / the correct way would be to map the character names
+ / like 'adieresis' to corresp. positions of ISOEnc and read
+ / these values from AFM files, too. Maybe later ... */
+ lastWidths[196] = lastWidths['A']; // Ä
+ lastWidths[228] = lastWidths['a']; // ä
+ lastWidths[214] = lastWidths['O']; // Ö
+ lastWidths[246] = lastWidths['o']; // ö
+ lastWidths[220] = lastWidths['U']; // Ü
+ lastWidths[252] = lastWidths['u']; // ü
+ lastWidths[223] = lastWidths[251]; // ß
}
- }
- // add descender to height (it is usually a negative value)
- if(lastDescender!=INT_MIN){
- height += (long)(((-lastDescender)/1000.0F) * Size); /* MATTHEW: forgot scale */
- }
- // return size values
- *x = widthSum;
- *y = height;
-
- // return other parameters
- if (descent){
- if(lastDescender!=INT_MIN){
- *descent = (long)(((-lastDescender)/1000.0F) * Size); /* MATTHEW: forgot scale */
- }else{
- *descent = 0;
+ /* JC: calculate UnderlineThickness/UnderlinePosition */
+ {
+ // VS: dirty, but is there any better solution?
+ double *pt;
+ pt = (double*) &m_underlinePosition;
+ *pt = UnderlinePosition * fontToUse->GetPointSize() / 1000.0f;
+ pt = (double*) &m_underlineThickness;
+ *pt = UnderlineThickness * fontToUse->GetPointSize() / 1000.0f * m_scaleFactor;
}
- }
-
- // currently no idea how to calculate this!
- // if (externalLeading) *externalLeading = 0;
- if (externalLeading)
- *externalLeading = 0;
- // ----- end of contributed code -----
-#endif
-}
+ /* 3. now the font metrics are read in, calc size this
+ / is done by adding the widths of the characters in the
+ / string. they are given in 1/1000 of the size! */
-void wxPostScriptDC::GetSizeMM(long *width, long *height) const
-{
- const char *paperType = wxThePrintSetupData->GetPaperName();
-
- if (!paperType) paperType = _("A4 210 x 297 mm");
-
- wxPrintPaperType *paper = wxThePrintPaperDatabase->FindPaperType(paperType);
-
- if (!paper) paper = wxThePrintPaperDatabase->FindPaperType(_("A4 210 x 297 mm"));
-
- if (paper)
+ double widthSum=0;
+ wxCoord height=Size; /* by default */
+ unsigned char *p;
+ for(p=(unsigned char *)wxMBSTRINGCAST strbuf; *p; p++)
{
- if (width) *width = paper->widthMM;
- if (height) *height = paper->heightMM;
+ if(lastWidths[*p]== INT_MIN)
+ {
+ wxLogDebug(wxT("GetTextExtent: undefined width for character '%hc' (%d)\n"), *p,*p);
+ widthSum += (lastWidths[' ']/1000.0F * Size); /* assume space */
+ }
+ else
+ {
+ widthSum += ((lastWidths[*p]/1000.0F)*Size);
+ }
}
- else
+
+ /* add descender to height (it is usually a negative value) */
+ //if (lastDescender != INT_MIN)
+ //{
+ // height += (wxCoord)(((-lastDescender)/1000.0F) * Size); /* MATTHEW: forgot scale */
+ //}
+ // - commented by V. Slavik - height already contains descender in it
+ // (judging from few experiments)
+
+ /* return size values */
+ if ( x )
+ *x = (wxCoord)widthSum;
+ if ( y )
+ *y = height;
+
+ /* return other parameters */
+ if (descent)
{
- if (width) *width = 210;
- if (height) *height = 297;
+ if(lastDescender!=INT_MIN)
+ {
+ *descent = (wxCoord)(((-lastDescender)/1000.0F) * Size); /* MATTHEW: forgot scale */
+ }
+ else
+ {
+ *descent = 0;
+ }
}
+
+ /* currently no idea how to calculate this! */
+ if (externalLeading) *externalLeading = 0;
+
+#endif
}
// Determine the Default Postscript Previewer
# define PS_VIEWER_PROG "ghostview"
#else
// Windows ghostscript/ghostview
-# define PS_VIEWER_PROG NULL
+# define PS_VIEWER_PROG "gsview"
#endif
wxPrintSetupData *wxThePrintSetupData = (wxPrintSetupData *) NULL;
-#if !USE_SHARED_LIBRARY
-IMPLEMENT_DYNAMIC_CLASS(wxPostScriptModule, wxModule)
IMPLEMENT_DYNAMIC_CLASS(wxPostScriptDC, wxDC)
IMPLEMENT_DYNAMIC_CLASS(wxPrintSetupData, wxObject)
-IMPLEMENT_DYNAMIC_CLASS(wxPrintPaperType, wxObject)
-#endif
// Redundant now I think
#if 1
IMPLEMENT_CLASS(wxPostScriptPrintDialog, wxDialog)
wxPostScriptPrintDialog::wxPostScriptPrintDialog (wxWindow *parent, const wxString& title,
- const wxPoint& pos, const wxSize& size, long style):
+ const wxPoint& pos, const wxSize& size, wxCoord style):
wxDialog(parent, -1, title, pos, size, style)
{
wxBeginBusyCursor();
*orientation = new wxString[2],
*print_modes = new wxString[3];
int features;
- long wx_printer_translate_x, wx_printer_translate_y;
+ wxCoord wx_printer_translate_x, wx_printer_translate_y;
double wx_printer_scale_x, wx_printer_scale_y;
orientation[0] = _("Portrait");
print_modes[2] = _("Preview Only");
-
+
wxButton *okBut = new wxButton (this, wxID_OK, _("OK"), wxPoint(5, 5));
(void) new wxButton (this, wxID_CANCEL, _("Cancel"), wxPoint(40, 5));
okBut->SetDefault();
radio0->SetSelection((int)wxThePrintSetupData->GetPrinterOrientation() - 1);
// @@@ Configuration hook
- if (wxThePrintSetupData->GetPrintPreviewCommand() == NULL)
+ if ( !wxThePrintSetupData->GetPrintPreviewCommand() )
wxThePrintSetupData->SetPrintPreviewCommand(PS_VIEWER_PROG);
- wxGetResource ("wxWindows", "PSView", &wxThePrintSetupData->previewCommand);
+ // wxGetResource ("wxWindows", "PSView", &wxThePrintSetupData->m_previewCommand);
features = (wxThePrintSetupData->GetPrintPreviewCommand() &&
- *wxThePrintSetupData->GetPrintPreviewCommand()) ? 3 : 2;
-
+ *wxThePrintSetupData->GetPrintPreviewCommand()) ? 3 : 2;
+
wxRadioBox *radio1 = new wxRadioBox(this, wxID_PRINTER_MODES, _("PostScript:"),
wxPoint(150, yPos),
wxSize(-1,-1), features,
- print_modes, features, wxRA_SPECIFY_ROWS);
+ print_modes, features, wxRA_SPECIFY_ROWS);
#ifdef __WXMSW__
radio1->Enable(0, FALSE);
yPos += 25;
(void) new wxStaticText(this, -1, _("X Translation"), wxPoint(5, yPos));
- sprintf (buf, "%.2ld", wx_printer_translate_x);
+ sprintf (buf, "%.2d", wx_printer_translate_x);
/* wxTextCtrl *text3 = */ (void) new wxTextCtrl(this, wxID_PRINTER_X_TRANS, buf, wxPoint(100, yPos), wxSize(100, -1));
(void) new wxStaticText(this, -1, _("Y Translation"), wxPoint(220, yPos));
- sprintf (buf, "%.2ld", wx_printer_translate_y);
+ sprintf (buf, "%.2d", wx_printer_translate_y);
/* wxTextCtrl *text4 = */ (void) new wxTextCtrl(this, wxID_PRINTER_Y_TRANS, buf, wxPoint(320, yPos), wxSize(100, -1));
-
+
Fit ();
delete[] orientation;
{
if ( wxDialog::ShowModal() == wxID_OK )
{
-// wxTextCtrl *text0 = (wxTextCtrl *)FindWindow(wxID_PRINTER_OPTIONS);
- wxTextCtrl *text1 = (wxTextCtrl *)FindWindow(wxID_PRINTER_X_SCALE);
- wxTextCtrl *text2 = (wxTextCtrl *)FindWindow(wxID_PRINTER_Y_SCALE);
- wxTextCtrl *text3 = (wxTextCtrl *)FindWindow(wxID_PRINTER_X_TRANS);
- wxTextCtrl *text4 = (wxTextCtrl *)FindWindow(wxID_PRINTER_Y_TRANS);
-// wxTextCtrl *text_prt = (wxTextCtrl *)FindWindow(wxID_PRINTER_COMMAND);
- wxRadioBox *radio0 = (wxRadioBox *)FindWindow(wxID_PRINTER_ORIENTATION);
- wxRadioBox *radio1 = (wxRadioBox *)FindWindow(wxID_PRINTER_MODES);
-
- StringToDouble (WXSTRINGCAST text1->GetValue (), &wxThePrintSetupData->printerScaleX);
- StringToDouble (WXSTRINGCAST text2->GetValue (), &wxThePrintSetupData->printerScaleY);
- StringToLong (WXSTRINGCAST text3->GetValue (), &wxThePrintSetupData->printerTranslateX);
- StringToLong (WXSTRINGCAST text4->GetValue (), &wxThePrintSetupData->printerTranslateY);
+// wxTextCtrl *text0 = (wxTextCtrl *)FindWindow(wxID_PRINTER_OPTIONS);
+ wxTextCtrl *text1 = (wxTextCtrl *)FindWindow(wxID_PRINTER_X_SCALE);
+ wxTextCtrl *text2 = (wxTextCtrl *)FindWindow(wxID_PRINTER_Y_SCALE);
+ wxTextCtrl *text3 = (wxTextCtrl *)FindWindow(wxID_PRINTER_X_TRANS);
+ wxTextCtrl *text4 = (wxTextCtrl *)FindWindow(wxID_PRINTER_Y_TRANS);
+// wxTextCtrl *text_prt = (wxTextCtrl *)FindWindow(wxID_PRINTER_COMMAND);
+ wxRadioBox *radio0 = (wxRadioBox *)FindWindow(wxID_PRINTER_ORIENTATION);
+ wxRadioBox *radio1 = (wxRadioBox *)FindWindow(wxID_PRINTER_MODES);
+
+ StringToDouble (WXSTRINGCAST text1->GetValue (), &wxThePrintSetupData->m_printerScaleX);
+ StringToDouble (WXSTRINGCAST text2->GetValue (), &wxThePrintSetupData->m_printerScaleY);
+
+ long dummy;
+ StringToLong (WXSTRINGCAST text3->GetValue (), &dummy);
+ wxThePrintSetupData->m_printerTranslateX = (wxCoord)dummy;
+ StringToLong (WXSTRINGCAST text4->GetValue (), &dummy);
+ wxThePrintSetupData->m_printerTranslateY = (wxCoord)dummy;
#ifdef __X__
// wxThePrintSetupData->SetPrinterOptions(WXSTRINGCAST text0->GetValue ());
// wxThePrintSetupData->SetPrinterCommand(WXSTRINGCAST text_prt->GetValue ());
#endif
- wxThePrintSetupData->SetPrinterOrientation((radio0->GetSelection() == 1 ? PS_LANDSCAPE : PS_PORTRAIT));
+ wxThePrintSetupData->SetPrinterOrientation((radio0->GetSelection() == 1 ? wxLANDSCAPE : wxPORTRAIT));
// C++ wants this
switch ( radio1->GetSelection() ) {
- case 0: wxThePrintSetupData->SetPrinterMode(PS_PRINTER); break;
- case 1: wxThePrintSetupData->SetPrinterMode(PS_FILE); break;
- case 2: wxThePrintSetupData->SetPrinterMode(PS_PREVIEW); break;
+ case 0: wxThePrintSetupData->SetPrinterMode(PS_PRINTER); break;
+ case 1: wxThePrintSetupData->SetPrinterMode(PS_FILE); break;
+ case 2: wxThePrintSetupData->SetPrinterMode(PS_PREVIEW); break;
}
- return wxID_OK;
+ return wxID_OK;
}
return wxID_CANCEL;
}
// PostScript printer settings
// RETAINED FOR BACKWARD COMPATIBILITY
-void wxSetPrinterCommand(const char *cmd)
+void wxSetPrinterCommand(const wxString& cmd)
{
wxThePrintSetupData->SetPrinterCommand(cmd);
}
-void wxSetPrintPreviewCommand(const char *cmd)
+void wxSetPrintPreviewCommand(const wxString& cmd)
{
wxThePrintSetupData->SetPrintPreviewCommand(cmd);
}
-void wxSetPrinterOptions(const char *flags)
+void wxSetPrinterOptions(const wxString& flags)
{
wxThePrintSetupData->SetPrinterOptions(flags);
}
-void wxSetPrinterFile(const char *f)
+void wxSetPrinterFile(const wxString& f)
{
wxThePrintSetupData->SetPrinterFile(f);
}
wxThePrintSetupData->SetPrinterScaling(x, y);
}
-void wxSetPrinterTranslation(long x, long y)
+void wxSetPrinterTranslation(wxCoord x, wxCoord y)
{
wxThePrintSetupData->SetPrinterTranslation(x, y);
}
wxThePrintSetupData->SetPrinterMode(mode);
}
-void wxSetAFMPath(const char *f)
+void wxSetAFMPath(const wxString& f)
{
wxThePrintSetupData->SetAFMPath(f);
}
// Get current values
-char *wxGetPrinterCommand()
+wxString wxGetPrinterCommand()
{
return wxThePrintSetupData->GetPrinterCommand();
}
-char *wxGetPrintPreviewCommand()
+wxString wxGetPrintPreviewCommand()
{
return wxThePrintSetupData->GetPrintPreviewCommand();
}
-char *wxGetPrinterOptions()
+wxString wxGetPrinterOptions()
{
return wxThePrintSetupData->GetPrinterOptions();
}
-char *wxGetPrinterFile()
+wxString wxGetPrinterFile()
{
return wxThePrintSetupData->GetPrinterFile();
}
wxThePrintSetupData->GetPrinterScaling(x, y);
}
-void wxGetPrinterTranslation(long *x, long *y)
+void wxGetPrinterTranslation(wxCoord *x, wxCoord *y)
{
wxThePrintSetupData->GetPrinterTranslation(x, y);
}
return wxThePrintSetupData->GetPrinterMode();
}
-char *wxGetAFMPath()
+wxString wxGetAFMPath()
{
return wxThePrintSetupData->GetAFMPath();
}
wxPrintSetupData::wxPrintSetupData()
{
- printerCommand = (char *) NULL;
- previewCommand = (char *) NULL;
- printerFlags = (char *) NULL;
- printerOrient = PS_PORTRAIT;
- printerScaleX = (double)1.0;
- printerScaleY = (double)1.0;
- printerTranslateX = 0;
- printerTranslateY = 0;
- // 1 = Preview, 2 = print to file, 3 = send to printer
- printerMode = 3;
- afmPath = (char *) NULL;
- paperName = (char *) NULL;
- printColour = TRUE;
- printerFile = (char *) NULL;
+ m_printerOrient = wxPORTRAIT;
+ m_printerScaleX = (double)1.0;
+ m_printerScaleY = (double)1.0;
+ m_printerTranslateX = 0;
+ m_printerTranslateY = 0;
+ m_printerMode = wxPRINT_MODE_FILE;
+ m_printColour = TRUE;
}
wxPrintSetupData::~wxPrintSetupData()
{
- if (printerCommand)
- delete[] printerCommand;
- if (previewCommand)
- delete[] previewCommand;
- if (printerFlags)
- delete[] printerFlags;
- if (afmPath)
- delete[] afmPath;
- if (paperName)
- delete[] paperName;
- if (printerFile)
- delete[] printerFile;
-}
-
-void wxPrintSetupData::SetPrinterCommand(const char *cmd)
-{
- if (cmd == printerCommand)
- return;
-
- if (printerCommand)
- delete[] printerCommand;
- if (cmd)
- printerCommand = copystring(cmd);
- else
- printerCommand = (char *) NULL;
-}
-
-void wxPrintSetupData::SetPrintPreviewCommand(const char *cmd)
-{
- if (cmd == previewCommand)
- return;
-
- if (previewCommand)
- delete[] previewCommand;
- if (cmd)
- previewCommand = copystring(cmd);
- else
- previewCommand = (char *) NULL;
-}
-
-void wxPrintSetupData::SetPaperName(const char *name)
-{
- if (name == paperName)
- return;
-
- if (paperName)
- delete[] paperName;
- if (name)
- paperName = copystring(name);
- else
- paperName = (char *) NULL;
-}
-
-void wxPrintSetupData::SetPrinterOptions(const char *flags)
-{
- if (printerFlags == flags)
- return;
-
- if (printerFlags)
- delete[] printerFlags;
- if (flags)
- printerFlags = copystring(flags);
- else
- printerFlags = (char *) NULL;
-}
-
-void wxPrintSetupData::SetPrinterFile(const char *f)
-{
- if (f == printerFile)
- return;
-
- if (printerFile)
- delete[] printerFile;
- if (f)
- printerFile = copystring(f);
- else
- printerFile = (char *) NULL;
-}
-
-void wxPrintSetupData::SetPrinterOrientation(int orient)
-{
- printerOrient = orient;
-}
-
-void wxPrintSetupData::SetPrinterScaling(double x, double y)
-{
- printerScaleX = x;
- printerScaleY = y;
-}
-
-void wxPrintSetupData::SetPrinterTranslation(long x, long y)
-{
- printerTranslateX = x;
- printerTranslateY = y;
-}
-
-// 1 = Preview, 2 = print to file, 3 = send to printer
-void wxPrintSetupData::SetPrinterMode(int mode)
-{
- printerMode = mode;
-}
-
-void wxPrintSetupData::SetAFMPath(const char *f)
-{
- if (f == afmPath)
- return;
-
- if (afmPath)
- delete[] afmPath;
- if (f)
- afmPath = copystring(f);
- else
- afmPath = (char *) NULL;
-}
-
-void wxPrintSetupData::SetColour(bool col)
-{
- printColour = col;
-}
-
-// Get current values
-char *wxPrintSetupData::GetPrinterCommand()
-{
- return printerCommand;
-}
-
-char *wxPrintSetupData::GetPrintPreviewCommand()
-{
- return previewCommand;
-}
-
-char *wxPrintSetupData::GetPrinterOptions()
-{
- return printerFlags;
-}
-
-char *wxPrintSetupData::GetPrinterFile()
-{
- return printerFile;
-}
-
-char *wxPrintSetupData::GetPaperName()
-{
- return paperName;
-}
-
-int wxPrintSetupData::GetPrinterOrientation()
-{
- return printerOrient;
-}
-
-void wxPrintSetupData::GetPrinterScaling(double *x, double *y)
-{
- *x = printerScaleX;
- *y = printerScaleY;
-}
-
-void wxPrintSetupData::GetPrinterTranslation(long *x, long *y)
-{
- *x = printerTranslateX;
- *y = printerTranslateY;
-}
-
-int wxPrintSetupData::GetPrinterMode()
-{
- return printerMode;
-}
-
-char *wxPrintSetupData::GetAFMPath()
-{
- return afmPath;
-}
-
-bool wxPrintSetupData::GetColour()
-{
- return printColour;
}
void wxPrintSetupData::operator=(wxPrintSetupData& data)
SetPrinterCommand(data.GetPrinterCommand());
SetPrintPreviewCommand(data.GetPrintPreviewCommand());
SetPrinterOptions(data.GetPrinterOptions());
- long x, y;
+ wxCoord x, y;
data.GetPrinterTranslation(&x, &y);
SetPrinterTranslation(x, y);
SetColour(data.GetColour());
}
+// Initialize from a wxPrintData object (wxPrintData should now be used instead of wxPrintSetupData).
+void wxPrintSetupData::operator=(const wxPrintData& data)
+{
+ SetPrinterCommand(data.GetPrinterCommand());
+ SetPrintPreviewCommand(data.GetPreviewCommand());
+ SetPrinterOptions(data.GetPrinterOptions());
+ SetPrinterTranslation(data.GetPrinterTranslateX(), data.GetPrinterTranslateY());
+ SetPrinterScaling(data.GetPrinterScaleX(), data.GetPrinterScaleY());
+ SetPrinterOrientation(data.GetOrientation());
+ SetPrinterMode((int) data.GetPrintMode());
+ SetAFMPath(data.GetFontMetricPath());
+ SetPaperName(wxThePrintPaperDatabase->ConvertIdToName(data.GetPaperId()));
+ SetColour(data.GetColour());
+ SetPrinterFile(data.GetFilename());
+}
+
void wxInitializePrintSetupData(bool init)
{
if (init)
wxThePrintSetupData = new wxPrintSetupData;
wxThePrintSetupData->SetPrintPreviewCommand(PS_VIEWER_PROG);
- wxThePrintSetupData->SetPrinterOrientation(PS_PORTRAIT);
- wxThePrintSetupData->SetPrinterMode(PS_PREVIEW);
- wxThePrintSetupData->SetPaperName(_("A4 210 x 297 mm"));
+ wxThePrintSetupData->SetPrinterOrientation(wxPORTRAIT);
+ wxThePrintSetupData->SetPrinterMode(wxPRINT_MODE_PREVIEW);
+ wxThePrintSetupData->SetPaperName(_("A4 sheet, 210 x 297 mm"));
// Could have a .ini file to read in some defaults
// - and/or use environment variables, e.g. WXWIN
#ifdef __WXMSW__
wxThePrintSetupData->SetPrinterCommand("print");
wxThePrintSetupData->SetAFMPath("c:\\windows\\system\\");
- wxThePrintSetupData->SetPrinterOptions(NULL);
+ wxThePrintSetupData->SetPrinterOptions("");
#endif
#if !defined(__VMS__) && !defined(__WXMSW__)
wxThePrintSetupData->SetPrinterCommand("lpr");
- wxThePrintSetupData->SetPrinterOptions((char *) NULL);
- wxThePrintSetupData->SetAFMPath((char *) NULL);
+ wxThePrintSetupData->SetPrinterOptions("");
+ wxThePrintSetupData->SetAFMPath("");
#endif
}
else
}
}
-/*
- * Paper size database for PostScript
- */
-
-wxPrintPaperType::wxPrintPaperType(const char *name, int wmm, int hmm, int wp, int hp)
-{
- widthMM = wmm;
- heightMM = hmm;
- widthPixels = wp;
- heightPixels = hp;
- pageName = copystring(name);
-}
-
-wxPrintPaperType::~wxPrintPaperType()
-{
- delete[] pageName;
-}
-
-/*
- * Print paper database for PostScript
- */
-
-#if !USE_SHARED_LIBRARIES
-IMPLEMENT_DYNAMIC_CLASS(wxPrintPaperDatabase, wxList)
-#endif
-
-wxPrintPaperDatabase::wxPrintPaperDatabase():wxList(wxKEY_STRING)
-{
- DeleteContents(TRUE);
-}
-
-wxPrintPaperDatabase::~wxPrintPaperDatabase()
-{
-}
-
-void wxPrintPaperDatabase::CreateDatabase()
-{
- // Need correct values for page size in pixels.
- // Each unit is one 'point' = 1/72 of an inch.
- // NOTE: WE NEED ALSO TO MAKE ADJUSTMENTS WHEN TRANSLATING
- // in wxPostScriptDC code, so we can start from top left.
- // So access this database and translate by appropriate number
- // of points for this paper size. OR IS IT OK ALREADY?
- // Can't remember where the PostScript origin is by default.
- // Heck, someone will know how to make it hunky-dory...
- // JACS 25/5/95
+// A module to allow initialization/cleanup of PostScript-related
+// things without calling these functions from app.cpp.
- AddPaperType(_("A4 210 x 297 mm"), 210, 297, 595, 842);
- AddPaperType(_("A3 297 x 420 mm"), 297, 420, 842, 1191);
- AddPaperType(_("Letter 8 1/2 x 11 in"), 216, 279, 612, 791);
- AddPaperType(_("Legal 8 1/2 x 14 in"), 216, 356, 612, 1009);
-
-/*
- This is for 100 ppi
-
- AddPaperType(_("A4 210 x 297 mm"), 210, 297, 210*4, 297*4 );
- AddPaperType(_("A3 297 x 420 mm"), 297, 420, 297*4, 420*4 );
- AddPaperType(_("Letter 8 1/2 x 11 in"), 216, 279, 216*4, 279*4 );
- AddPaperType(_("Legal 8 1/2 x 14 in"), 216, 356, 216*4, 356*4 );
-*/
-}
-
-void wxPrintPaperDatabase::ClearDatabase()
+class WXDLLEXPORT wxPostScriptModule: public wxModule
{
- Clear();
-}
+DECLARE_DYNAMIC_CLASS(wxPostScriptModule)
+public:
+ wxPostScriptModule() {}
+ bool OnInit();
+ void OnExit();
+};
-void wxPrintPaperDatabase::AddPaperType(const char *name, int wmm, int hmm, int wp, int hp)
-{
- Append(name, new wxPrintPaperType(name, wmm, hmm, wp, hp));
-}
-
-wxPrintPaperType *wxPrintPaperDatabase::FindPaperType(const char *name)
-{
- wxNode *node = Find(name);
- if (node)
- return (wxPrintPaperType *)node->Data();
- else
- return (wxPrintPaperType *) NULL;
-}
+IMPLEMENT_DYNAMIC_CLASS(wxPostScriptModule, wxModule)
/*
* Initialization/cleanup module
bool wxPostScriptModule::OnInit()
{
wxInitializePrintSetupData();
- wxThePrintPaperDatabase = new wxPrintPaperDatabase;
- wxThePrintPaperDatabase->CreateDatabase();
return TRUE;
}
void wxPostScriptModule::OnExit()
{
wxInitializePrintSetupData(FALSE);
- delete wxThePrintPaperDatabase;
- wxThePrintPaperDatabase = NULL;
}
#endif
// wxUSE_POSTSCRIPT
+
+#endif
+ // wxUSE_PRINTING_ARCHITECTURE
projects / wxWidgets.git / blobdiff