# Author: Ron <ron@debian.org>
# Modified by:
# Created: 8/9/2004
-# RCS-ID: $Id$
# Copyright: (c) 2004 Ron <ron@debian.org>
# Essentially a fresh start this time around, but for maximum
# compatibility basic code was taken from, and heavy reference
wx-config [--prefix[=DIR]] [--exec-prefix[=DIR]] [--release] [--version-full]
[--list] [--selected-config] [--host=HOST] [--toolkit=TOOLKIT]
- [--universal[=yes|no]] [--unicode[=yes|no]] [--debug[=yes|no]]
- [--static[=yes|no]] [--version[=VERSION]] [--basename] [--cc]
- [--cppflags] [--cflags] [--cxxflags] [--rescomp] [--cxx]
- [--linkdeps] [--ld] [--utility=UTIL]
+ [--universal[=yes|no]] [--unicode[=yes|no]] [--static[=yes|no]]
+ [--debug[=yes|no]] [--version[=VERSION]] [--basename] [--cc] [--cxx]
+ [--cppflags [base]] [--cxxflags [base]] [--cflags]
+ [--rescomp] [--linkdeps] [--ld] [--utility=UTIL]
[--libs [LIBS...]] [--optional-libs [LIBS...]]
wx-config returns information about the wxWidgets libraries available on
your system. It may be used to retrieve the information required to build
- applications using these libraries using --cppflags, --cflags, --cxxflags
- and --libs options.
+ applications using these libraries using --cppflags, --cxxflags, --cflags,
+ and --libs options. And you may query the properties of this configuration
+ using --query-{host,toolkit,widgetset,chartype,debugtype,version,linkage}.
+
+ NOTE: Usage of --debug and --query-debugtype are only relevant if you
+ have any versions prior to 2.9 installed and use the --version option to
+ select an earlier version.
If multiple builds of wxWidgets are available, you can use the options
- --prefix, --host, --toolkit, --unicode, --debug, --static, --universal and
- --version to select from them. The --selected-config option shows the name
- of the current configuration and --list shows available alternatives which
- match specified criteria. The --utility option returns the correct version
- of UTIL to use with the selected build. The --linkdeps option returns only
+ --prefix, --host, --toolkit, --unicode, --static, --universal or --version
+ to select from them. The --selected-config option shows the name of the
+ current configuration and --list shows available alternatives which match
+ specified criteria. The --utility option returns the correct version of
+ UTIL to use with the selected build. The --linkdeps option returns only
static libraries for your makefile link rule dependencies.
The LIBS arguments (comma or space separated) may be used to specify the
list below. The --optional-libs parameter should be followed by a list
of libs that should be linked to, but only if they are available.
- Available libraries in this build are : @BUILT_WX_LIBS@
+ Available libraries in this build are:
+ @BUILT_WX_LIBS@
EOF
wxconfig_input_options="prefix exec_prefix utility $wxconfig_schema"
# Input options that accept only a yes or no argument.
+#
+# Notice that this includes "debug" but it is done only for compatibility, this
+# options (i.e. --debug[=yes] or --debug=no) is completely ignored as there is
+# no distinction between debug and release builds in wx any more
wxconfig_yesno_options="universal unicode debug static"
# Boolean options that do something or not.
}
+MAC_FRAMEWORK=
+MAC_FRAMEWORK_PREFIX=
+
# Now we are ready to find out what the user wants from us.
# --------------------------------------------------------------
# With just a little more complexity here we could have shortest
# unique string matching for options, but that is probably overkill
-# today, so lets just get the job done.
+# today, so let's just get the job done.
#
# The important thing now then is that we simply read all input from
# the user and don't try to act prematurely on partial information.
fi
;;
+ --query-*)
+ _name=`echo $arg | sed 's/^--query-//'`
+ if match_field "$_name" $wxconfig_schema
+ then
+ query_options="${query_options:+$query_options }$_name"
+ continue
+ fi
+ ;;
+
--*)
_name=`option_name $arg`
if validate_arg wxconfig flag "$_name" yes ||
*)
# We validate the parameters later ...
- if [ "$_name" = "libs" ]
- then
+
+ if [ "$_name" = "cxxflags" ] || [ "$_name" = "cppflags" ] || [ "$_name" = "cflags" ]; then
+ cxx_parameters="${cxx_parameters:+$cxx_parameters }$arg"
+ elif [ "$_name" = "libs" ]; then
libs_parameters="${libs_parameters:+$libs_parameters }$arg"
- elif [ "$_name" = "optional_libs" ]
- then
+ elif [ "$_name" = "optional_libs" ]; then
optional_libs_parameters="${optional_libs_parameters:+$optional_libs_parameters }$arg"
else
- # These are unattached args and signify an error
- input_parameters="${input_parameters:+$input_parameters }$arg"
+ # normally anything here are unattached arguments and signify an
+ # error but for compatibility with the 2.8 wx-config and,
+ # especially, configure scripts generated using 2.8 wxwin.m4 and
+ # hence doing `wx-config --version base,std`, we ignore anything
+ # following this option, just as 2.8 version used to do
+ if [ "$_name" != "version" ]; then
+ input_parameters="${input_parameters:+$input_parameters }$arg"
+ fi
fi
continue
;;
check_yesno_option universal widgetset univ
check_yesno_option unicode chartype unicode ansi
+check_yesno_option static linkage static
check_yesno_option debug debugtype debug release
-check_yesno_option static linkage '-static'
-
-# Display error for unknown input parameters
-if [ $input_parameters ]; then
- echo "Extra unknown input parameters : $input_parameters"
- exit 1
-fi
# Dump everything we just read in debug mode.
if [ -n "$WXDEBUG" ]; then
for o in $output_options; do
decho " $o = `eval echo \"\\\$output_option_$o\"`"
done
+ decho " query options = $query_options"
fi
-# Everything came in as a legal argument then, lets put some of
+# Everything came in as a legal argument then, let's put some of
# the pieces together with a little self knowledge to see what
# we should do next.
# --------------------------------------------------------------
# get_mask [ _hash ]
-# Construct a config filename mask from a psuedo-hash of component variables.
+# Construct a config filename mask from a pseudo-hash of component variables.
# The optional argument is the prefix of the hash to use. If not specified
# this will return a mask derived from the command line options that were used.
get_mask()
{
[ $# -gt 0 ] || set m
- eval echo "\${$1_host}\${$1_toolkit}\${$1_widgetset}-\${$1_chartype}-\${$1_debugtype}\${$1_linkage}-\${$1_version}\${$1_flavour}"
+
+ case "$m_ourversion" in
+ 2.9)
+ is29orlater=1
+ ;;
+ 2.*)
+ # there is no 2.10 so currently everything else is <= 2.8
+ is29orlater=0
+ ;;
+ *)
+ # 3.x and later "is29orlater" too
+ is29orlater=1
+ ;;
+ esac
+
+ # use 2.8 or 2.9 version of the mask: the difference is the presence of
+ # debug type in pre-2.9
+ if [ $is29orlater = 1 ]; then
+ eval echo "\${$1_host:+\$$1_host-}\${$1_toolkit}\${$1_widgetset}-\${$1_chartype}\${$1_linkage:+-\$$1_linkage}-\${$1_version}\${$1_flavour}"
+ else
+ eval echo "\${$1_host:+\$$1_host-}\${$1_toolkit}\${$1_widgetset}-\${$1_chartype}-\${$1_debugtype}\${$1_linkage:+-\$$1_linkage}-\${$1_version}\${$1_flavour}"
+ fi
}
# Returns true if this script is for a cross compiled config.
# Define a pseudo-hash to contain the specification of this wx-config
# instance and its associated library.
-this_host="${target:+${target}-}"
+this_host="${target:+${target}}"
this_toolkit="@TOOLKIT_DIR@@TOOLKIT_VERSION@"
this_widgetset="@WIDGET_SET@"
this_chartype="@WX_CHARTYPE@"
-this_debugtype="@WX_DEBUGTYPE@"
+this_debugtype="release"
this_flavour="@WX_FLAVOUR@"
this_version="@WX_RELEASE@"
-this_linkage=`[ "x@SHARED@" = "x1" ] || echo '-static'`
+this_linkage=`[ "x@SHARED@" = "x1" ] || echo 'static'`
-this_config=`get_mask this`
# Extract the user specification from the options parsed.
m_host=${input_option_host:+"${input_option_host}-?"}
-m_host=${m_host:-${input_option_host-$this_host}}
+m_host=${m_host:-$this_host}
m_toolkit=${input_option_toolkit:-'[^-]+'}
m_widgetset=${input_option_widgetset-'(univ)?'}
m_chartype=${input_option_chartype:-'(unicode|ansi)'}
m_flavour=${input_option_flavour:+-$input_option_flavour}
m_flavour=${m_flavour:-${input_option_flavour-'(-[^-]+)?'}}
m_version=${input_option_version:-'[0-9]+\.[0-9]+'}
-m_linkage=${input_option_linkage-'(-static)?'}
+m_linkage=${input_option_linkage-'?(static)?'}
+
+# Test whether or not --version has been specified
+#
+# This must be done after getting the input options so get_mask works correctly
+# since it is version-dependent
+
+if [ -z "$input_option_version" ]; then
+ m_ourversion="2.9"
+else
+ m_ourversion=$m_version
+fi
+
+this_config=`get_mask this`
configmask="^`get_mask`$"
# and its downhill fast from here if we have to ride that boat.
# Early pruning still gets that down to under half a second (up from about
# .25), so we have some breathing space yet before a different search method
-# will be called for, but lets not squander it.
+# will be called for, but let's not squander it.
do_find_best_delegate()
{
(
{
[ $# -gt 0 ] || set m
eval [ "x\${$1_chartype}" != "xunicode" ] || _unicode_flag=u
- eval [ "x\${$1_debugtype}" != "xdebug" ] || _debug_flag=d
- eval echo "wx\${$1_toolkit}${_unicode_flag}${_debug_flag}-\${$1_version}\${$1_host}-config"
+ eval echo "wx\${$1_toolkit}${_unicode_flag}-\${$1_version}\${$1_host}-config"
}
# find_legacy_configs
if not user_mask_fits "$this_config" ; then
- # No? Then lets see if it knows anybody who can.
+ # No? Then let's see if it knows anybody who can.
# But first, just be sure someone hasn't typo'd us into a loop.
# In present day wx, correct delegation should never need more
# than one hop so this is trivial to detect.
decho "--> $prefix/bin/$_last_chance $_legacy_args"
fi
- export WXCONFIG_DELEGATED=yes
+ WXCONFIG_DELEGATED=yes
+ export WXCONFIG_DELEGATED
$prefix/bin/$_last_chance $_legacy_args
exit
decho "--> $wxconfdir/$best_delegate $*"
fi
- export WXCONFIG_DELEGATED=yes
+ WXCONFIG_DELEGATED=yes
+ export WXCONFIG_DELEGATED
$wxconfdir/$best_delegate $*
exit
fi
decho "--> $wxconfdir/`find_eligible_delegates $configmask` $*"
fi
- export WXCONFIG_DELEGATED=yes
+ WXCONFIG_DELEGATED=yes
+ export WXCONFIG_DELEGATED
$wxconfdir/`find_eligible_delegates $configmask` $*
exit
fi
[ -z "$output_option_basename" ] || echo "@WX_LIBRARY_BASENAME_GUI@"
[ -z "$output_option_cc" ] || echo "@CC@"
[ -z "$output_option_cxx" ] || echo "@CXX@"
-[ -z "$output_option_ld" ] || echo "@EXE_LINKER@"
+[ -z "$output_option_ld" ] || echo "@CXX@ -o"
[ -z "$flag_option_selected_config" ] || echo "$this_config"
+for q in $query_options; do
+ eval echo "\$this_$q"
+done
# --rezflags is deprecated and disabled (2005/11/29)
if [ -n "$output_option_rezflags" ]; then
ldlibs_gl="@OPENGL_LIBS@"
ldlibs_html="@EXTRALIBS_HTML@"
ldlibs_xml="@EXTRALIBS_XML@"
-ldlibs_odbc="@EXTRALIBS_ODBC@"
ldlibs_adv="@EXTRALIBS_SDL@"
ldlibs_stc="@EXTRALIBS_STC@"
+# Order the libraries passed to us correctly for static linking.
+#
+# While the libraries order doesn't matter when linking dynamically, we must
+# put the libraries depending on other libraries in front of their dependencies
+# when linking statically or the dependencies wouldn't be resolved by the
+# standard UNIX linkers.
+order_libs()
+{
+ if is_static; then
+ for lib do
+ # Distinguish between the libraries that may need to be moved to
+ # the end of the list (because other ones may depend on them) and
+ # those that can be output immediately because no other libraries
+ # depend on them.
+ case "$lib" in
+ base|core|html|xml|adv) eval "use_$lib=1" ;;
+ *) libs="$libs $lib" ;;
+ esac
+ done
+
+ # Add the libraries that we postponed adding above.
+ # Order of the checks here is important.
+ [ -z "$use_html" ] || libs="$libs html"
+ [ -z "$use_adv" ] || libs="$libs adv"
+ [ -z "$use_core" ] || libs="$libs core"
+ [ -z "$use_xml" ] || libs="$libs xml"
+ [ -z "$use_base" ] || libs="$libs base"
+ else
+ # No need to order them.
+ libs="$@"
+ fi
+
+ echo $libs
+}
+
# lib_flags_for _liblist
# This function returns a list of flags suitable to return with the
# output of --libs for all of the libraries in _liblist. You can
[ -z "$WXDEBUG" ] || decho " user supplied libs: '$wx_libs'"
+# Assume we are using the GUI, unless --libs was specified with no GUI libs
+using_gui=yes
+
if is_monolithic; then
# Only add additional info if --libs was specified and not just --optional-libs
wx_libs=`remove_field $i $wx_libs`
done
+ wx_libs=`order_libs $wx_libs`
wx_libs="@WXCONFIG_LDFLAGS_GUI@ `lib_flags_for $wx_libs`"
# We still need the core lib deps for a static build though
else
wx_libs="$wx_libs -lwx_@TOOLCHAIN_NAME@"
fi
-
- using_gui=yes
fi
else # MONOLITHIC = 0
fi
fi
- using_gui=no
- for i in $wx_libs ; do
- if match_field "$i" @STD_GUI_LIBS@ ; then
- _guildflags="@WXCONFIG_LDFLAGS_GUI@"
- using_gui=yes
- break
- fi
- match_field "$i" @STD_BASE_LIBS@ || using_gui=yes
- done
+ if [ -n "$output_option_libs" ]; then
+ using_gui=no
+ for i in $wx_libs ; do
+ if match_field "$i" @STD_GUI_LIBS@; then
+ _guildflags="@WXCONFIG_LDFLAGS_GUI@"
+ using_gui=yes
+ break
+ fi
+ match_field "$i" @STD_BASE_LIBS@ || using_gui=yes
+ done
+ fi
if is_static; then
link_deps=`link_deps_for $wx_libs`
fi
+ wx_libs=`order_libs $wx_libs`
wx_libs="$_guildflags `lib_flags_for $wx_libs`"
fi
+# If they explicitly set "--cxx(pp)flags base" then they don't want the GUI
+if [ "$cxx_parameters" = "base" ]; then
+ using_gui=no
+fi
+
+
if [ -n "$WXDEBUG" ]; then
decho
decho " using libs: '$wx_libs'"
if is_installed; then
_include_cppflags="-I${includedir}/wx-@WX_RELEASE@@WX_FLAVOUR@"
else
- _include_cppflags="-I${includedir} -I${prefix}/contrib/include"
+ _include_cppflags="-I${includedir}"
fi
_cppflags=`echo "-I${libdir}/wx/include/@TOOLCHAIN_FULLNAME@" $_include_cppflags "@WXCONFIG_CPPFLAGS@" $_gui_cppflags`
[ "x$libdir" = "x/usr/lib" ] ||
_ldflags="-L$libdir"
+ if [ -n "$MAC_FRAMEWORK" ]; then
+ wx_libs="-framework $MAC_FRAMEWORK"
+ if [ -n "$MAC_FRAMEWORK_PREFIX" ]; then
+ _ldflags="-F$MAC_FRAMEWORK_PREFIX"
+ else
+ _ldflags=""
+ fi
+ fi
+
is_installed || [ -n "$flag_option_no_rpath" ] || _rpath="@WXCONFIG_RPATH@"
- echo $_ldflags "@LDFLAGS@" $_rpath $wx_libs "@DMALLOC_LIBS@"
+ echo $_ldflags "@WXCONFIG_LDFLAGS@" $_rpath $wx_libs "@DMALLOC_LIBS@"
elif [ -n "$output_option_optional_libs" ]; then
# if only --optional-libs then output just the libs
"@WXCONFIG_RESFLAGS@"
else
echo "@RESCOMP@ --include-dir ${includedir}" \
- "--include-dir ${prefix}/contrib/include" \
"@WXCONFIG_RESFLAGS@"
fi
;;