#include "wx/stream.h"
+#ifdef HAVE_STATFS
+# ifdef __BSD__
+# include <sys/param.h>
+# include <sys/mount.h>
+# else
+# include <sys/vfs.h>
+# endif
+#endif // HAVE_STATFS
+
+#ifdef HAVE_STATVFS
+ #include <sys/statvfs.h>
+
+ #define statfs statvfs
+#endif // HAVE_STATVFS
+
#if wxUSE_GUI
#include "wx/unix/execute.h"
#endif
+// SGI signal.h defines signal handler arguments differently depending on
+// whether _LANGUAGE_C_PLUS_PLUS is set or not - do set it
+#if defined(__SGI__) && !defined(_LANGUAGE_C_PLUS_PLUS)
+ #define _LANGUAGE_C_PLUS_PLUS 1
+#endif // SGI hack
+
#include <stdarg.h>
#include <dirent.h>
#include <string.h>
// process management
// ----------------------------------------------------------------------------
-int wxKill(long pid, wxSignal sig)
+int wxKill(long pid, wxSignal sig, wxKillError *rc)
{
- return kill((pid_t)pid, (int)sig);
+ int err = kill((pid_t)pid, (int)sig);
+ if ( rc )
+ {
+ switch ( err )
+ {
+ case 0:
+ *rc = wxKILL_OK;
+ break;
+
+ case EINVAL:
+ *rc = wxKILL_BAD_SIGNAL;
+ break;
+
+ case EPERM:
+ *rc = wxKILL_ACCESS_DENIED;
+ break;
+
+ case ESRCH:
+ *rc = wxKILL_NO_PROCESS;
+ break;
+
+ default:
+ // this goes against Unix98 docs so log it
+ wxLogDebug(_T("unexpected kill(2) return value %d"), err);
+
+ // something else...
+ *rc = wxKILL_ERROR;
+ }
+ }
+
+ return err;
}
#define WXEXECUTE_NARGS 127
void wxHandleProcessTermination(wxEndProcessData *proc_data)
{
- int pid = (proc_data->pid > 0) ? proc_data->pid : -(proc_data->pid);
-
- // waitpid is POSIX so should be available everywhere, however on older
- // systems wait() might be used instead in a loop (until the right pid
- // terminates)
- int status = 0;
- int rc;
-
- // wait for child termination and if waitpid() was interrupted, try again
- do
+ // notify user about termination if required
+ if ( proc_data->process )
{
- rc = waitpid(pid, &status, 0);
+ proc_data->process->OnTerminate(proc_data->pid, proc_data->exitcode);
}
- while ( rc == -1 && errno == EINTR );
-
- if( rc == -1 || ! (WIFEXITED(status) || WIFSIGNALED(status)) )
+ // clean up
+ if ( proc_data->pid > 0 )
{
- wxLogSysError(_("Waiting for subprocess termination failed"));
- /* AFAIK, this can only happen if something went wrong within
- wxGTK, i.e. due to a race condition or some serious bug.
- After having fixed the order of statements in
- GTK_EndProcessDetector(). (KB)
- */
+ delete proc_data;
}
else
{
- // notify user about termination if required
- if (proc_data->process)
- {
- proc_data->process->OnTerminate(proc_data->pid,
- WEXITSTATUS(status));
- }
- // clean up
- if ( proc_data->pid > 0 )
- {
- delete proc_data;
- }
- else
- {
- // wxExecute() will know about it
- proc_data->exitcode = status;
-
- proc_data->pid = 0;
- }
+ // let wxExecute() know that the process has terminated
+ proc_data->pid = 0;
}
}
// wxStream classes to support IO redirection in wxExecute
// ----------------------------------------------------------------------------
+#if wxUSE_STREAMS
+
class wxProcessFileInputStream : public wxInputStream
{
public:
return ret;
}
+// ----------------------------------------------------------------------------
+// wxStreamTempBuffer
+// ----------------------------------------------------------------------------
+
+/*
+ Extract of a mail to wx-users to give the context of the problem we are
+ trying to solve here:
+
+ MC> If I run the command:
+ MC> find . -name "*.h" -exec grep linux {} \;
+ MC> in the exec sample synchronously from the 'Capture command output'
+ MC> menu, wxExecute never returns. I have to xkill it. Has anyone
+ MC> else encountered this?
+
+ Yes, I can reproduce it too.
+
+ I even think I understand why it happens: before launching the external
+ command we set up a pipe with a valid file descriptor on the reading side
+ when the output is redirected. So the subprocess happily writes to it ...
+ until the pipe buffer (which is usually quite big on Unix, I think the
+ default is 4Mb) is full. Then the writing process stops and waits until we
+ read some data from the pipe to be able to continue writing to it but we
+ never do it because we wait until it terminates to start reading and so we
+ have a classical deadlock.
+
+ Here is the fix: we now read the output as soon as it appears into a temp
+ buffer (wxStreamTempBuffer object) and later just stuff it back into the
+ stream when the process terminates. See supporting code in wxExecute()
+ itself as well.
+*/
+
+class wxStreamTempBuffer
+{
+public:
+ wxStreamTempBuffer();
+
+ // call to associate a stream with this buffer, otherwise nothing happens
+ // at all
+ void Init(wxInputStream *stream);
+
+ // check for input on our stream and cache it in our buffer if any
+ void Update();
+
+ ~wxStreamTempBuffer();
+
+private:
+ // the stream we're buffering, if NULL we don't do anything at all
+ wxInputStream *m_stream;
+
+ // the buffer of size m_size (NULL if m_size == 0)
+ void *m_buffer;
+
+ // the size of the buffer
+ size_t m_size;
+};
+
+wxStreamTempBuffer::wxStreamTempBuffer()
+{
+ m_stream = NULL;
+ m_buffer = NULL;
+ m_size = 0;
+}
+
+void wxStreamTempBuffer::Init(wxInputStream *stream)
+{
+ m_stream = stream;
+}
+
+void wxStreamTempBuffer::Update()
+{
+ if ( m_stream && !m_stream->Eof() )
+ {
+ // realloc in blocks of 1Kb - surely not the best strategy but which
+ // one is?
+ static const size_t incSize = 1024;
+
+ void *buf = realloc(m_buffer, m_size + incSize);
+ if ( !buf )
+ {
+ // don't read any more, we don't have enough memory to do it
+ m_stream = NULL;
+ }
+ else // got memory for the buffer
+ {
+ m_buffer = buf;
+ m_stream->Read((char *)m_buffer + m_size, incSize);
+ m_size += incSize;
+ }
+ }
+}
+
+wxStreamTempBuffer::~wxStreamTempBuffer()
+{
+ if ( m_buffer )
+ {
+ m_stream->Ungetch(m_buffer, m_size);
+ free(m_buffer);
+ }
+}
+
+#endif // wxUSE_STREAMS
+
long wxExecute(wxChar **argv,
bool sync,
wxProcess *process)
{
- wxCHECK_MSG( *argv, 0, wxT("can't exec empty command") );
+ // for the sync execution, we return -1 to indicate failure, but for async
+ // case we return 0 which is never a valid PID
+ //
+ // we define this as a macro, not a variable, to avoid compiler warnings
+ // about "ERROR_RETURN_CODE value may be clobbered by fork()"
+ #define ERROR_RETURN_CODE ((sync) ? -1 : 0)
+
+ wxCHECK_MSG( *argv, ERROR_RETURN_CODE, wxT("can't exec empty command") );
#if wxUSE_UNICODE
int mb_argc = 0;
ARGS_CLEANUP;
- return 0;
+ return ERROR_RETURN_CODE;
}
#endif // wxUSE_GUI
- int pipeIn[2];
- int pipeOut[2];
+ // pipes for inter process communication
+ int pipeIn[2], // stdin
+ pipeOut[2], // stdout
+ pipeErr[2]; // stderr
+
pipeIn[0] = pipeIn[1] =
- pipeOut[0] = pipeOut[1] = -1;
+ pipeOut[0] = pipeOut[1] =
+ pipeErr[0] = pipeErr[1] = -1;
if ( process && process->IsRedirected() )
{
- if ( pipe(pipeIn) == -1 || pipe(pipeOut) == -1 )
+ if ( pipe(pipeIn) == -1 || pipe(pipeOut) == -1 || pipe(pipeErr) == -1 )
{
#if wxUSE_GUI
// free previously allocated resources
ARGS_CLEANUP;
- return 0;
+ return ERROR_RETURN_CODE;
}
}
close(pipeIn[1]);
close(pipeOut[0]);
close(pipeOut[1]);
+ close(pipeErr[0]);
+ close(pipeErr[1]);
#endif // wxUSE_GUI
wxLogSysError( _("Fork failed") );
ARGS_CLEANUP;
- return 0;
+ return ERROR_RETURN_CODE;
}
else if ( pid == 0 ) // we're in child
{
{
for ( int fd = 0; fd < FD_SETSIZE; fd++ )
{
- if ( fd == pipeIn[0] || fd == pipeOut[1]
+ if ( fd == pipeIn[0] || fd == pipeOut[1] || fd == pipeErr[1]
#if wxUSE_GUI
|| fd == end_proc_detect[1]
#endif // wxUSE_GUI
}
}
- // redirect stdio and stdout
- // (TODO: what about stderr?)
+ // redirect stdio, stdout and stderr
if ( pipeIn[0] != -1 )
{
if ( dup2(pipeIn[0], STDIN_FILENO) == -1 ||
- dup2(pipeOut[1], STDOUT_FILENO) == -1 )
+ dup2(pipeOut[1], STDOUT_FILENO) == -1 ||
+ dup2(pipeErr[1], STDERR_FILENO) == -1 )
{
- wxLogSysError(_("Failed to redirect child process "
- "input/output"));
+ wxLogSysError(_("Failed to redirect child process input/output"));
}
close(pipeIn[0]);
close(pipeOut[1]);
+ close(pipeErr[1]);
}
execvp (*mb_argv, mb_argv);
// there is no return after successful exec()
_exit(-1);
+
+ // some compilers complain about missing return - of course, they
+ // should know that exit() doesn't return but what else can we do if
+ // they don't?
+#if defined(__VMS) || defined(__INTEL_COMPILER)
+ return 0;
+#endif
}
else // we're in parent
{
ARGS_CLEANUP;
// pipe initialization: construction of the wxStreams
+#if wxUSE_STREAMS
+ wxStreamTempBuffer bufIn, bufErr;
+#endif // wxUSE_STREAMS
+
if ( process && process->IsRedirected() )
{
- // These two streams are relative to this process.
+#if wxUSE_STREAMS
+ // in/out for subprocess correspond to our out/in
wxOutputStream *outStream = new wxProcessFileOutputStream(pipeIn[1]);
wxInputStream *inStream = new wxProcessFileInputStream(pipeOut[0]);
+ wxInputStream *errStream = new wxProcessFileInputStream(pipeErr[0]);
+
+ process->SetPipeStreams(inStream, outStream, errStream);
+
+ bufIn.Init(inStream);
+ bufErr.Init(inStream);
+#endif // wxUSE_STREAMS
+
close(pipeIn[0]); // close reading side
close(pipeOut[1]); // close writing side
-
- process->SetPipeStreams(inStream, outStream);
+ close(pipeErr[1]); // close writing side
}
-#if wxUSE_GUI
+#if wxUSE_GUI && !defined(__WXMICROWIN__)
wxEndProcessData *data = new wxEndProcessData;
if ( sync )
wxBusyCursor bc;
wxWindowDisabler wd;
- // it will be set to 0 from GTK_EndProcessDetector
- while (data->pid != 0)
+ // data->pid will be set to 0 from GTK_EndProcessDetector when the
+ // process terminates
+ while ( data->pid != 0 )
+ {
+#if wxUSE_STREAMS
+ bufIn.Update();
+ bufErr.Update();
+#endif // wxUSE_STREAMS
+
+ // give GTK+ a chance to call GTK_EndProcessDetector here and
+ // also repaint the GUI
wxYield();
+ }
int exitcode = data->exitcode;
return exitcode;
#endif // wxUSE_GUI
}
-
- return 0;
-
- #undef ARGS_CLEANUP
}
+#undef ERROR_RETURN_CODE
+#undef ARGS_CLEANUP
+
// ----------------------------------------------------------------------------
// file and directory functions
// ----------------------------------------------------------------------------
const wxChar* wxGetHomeDir( wxString *home )
{
*home = wxGetUserHome( wxString() );
+ wxString tmp;
if ( home->IsEmpty() )
*home = wxT("/");
-
+#ifdef __VMS
+ tmp = *home;
+ if ( tmp.Last() != wxT(']'))
+ if ( tmp.Last() != wxT('/')) *home << wxT('/');
+#endif
return home->c_str();
}
return FALSE;
}
+#ifndef __WXMAC__
wxString wxGetOsDescription()
{
#ifndef WXWIN_OS_DESCRIPTION
return WXWIN_OS_DESCRIPTION;
#endif
}
+#endif
// this function returns the GUI toolkit version in GUI programs, but OS
// version in non-GUI ones
return -1;
}
+bool wxGetDiskSpace(const wxString& path, wxLongLong *pTotal, wxLongLong *pFree)
+{
+#if defined(HAVE_STATFS) || defined(HAVE_STATVFS)
+ struct statfs fs;
+ if ( statfs(path, &fs) != 0 )
+ {
+ wxLogSysError("Failed to get file system statistics");
+
+ return FALSE;
+ }
+
+ // under Solaris we might have to use fs.f_frsize instead as I think it
+ // may be a multiple of the block size in general (TODO)
+
+ if ( pTotal )
+ {
+ *pTotal = wxLongLong(fs.f_blocks) * fs.f_bsize;
+ }
+
+ if ( pFree )
+ {
+ *pFree = wxLongLong(fs.f_bavail) * fs.f_bsize;
+ }
+
+ return TRUE;
+#endif // HAVE_STATFS
+
+ return FALSE;
+}
+
+// ----------------------------------------------------------------------------
+// env vars
+// ----------------------------------------------------------------------------
+
+bool wxGetEnv(const wxString& var, wxString *value)
+{
+ // wxGetenv is defined as getenv()
+ wxChar *p = wxGetenv(var);
+ if ( !p )
+ return FALSE;
+
+ if ( value )
+ {
+ *value = p;
+ }
+
+ return TRUE;
+}
+
+bool wxSetEnv(const wxString& variable, const wxChar *value)
+{
+#if defined(HAVE_SETENV)
+ return setenv(variable.mb_str(),
+ value ? (const char *)wxString(value).mb_str()
+ : NULL,
+ 1 /* overwrite */) == 0;
+#elif defined(HAVE_PUTENV)
+ wxString s = variable;
+ if ( value )
+ s << _T('=') << value;
+
+ // transform to ANSI
+ const char *p = s.mb_str();
+
+ // the string will be free()d by libc
+ char *buf = (char *)malloc(strlen(p) + 1);
+ strcpy(buf, p);
+
+ return putenv(buf) == 0;
+#else // no way to set an env var
+ return FALSE;
+#endif
+}
+
// ----------------------------------------------------------------------------
// signal handling
// ----------------------------------------------------------------------------
#include <signal.h>
-static void wxFatalSignalHandler(int signal)
+extern "C" void wxFatalSignalHandler(wxTYPE_SA_HANDLER)
{
if ( wxTheApp )
{
projects / wxWidgets.git / blobdiff