@endcode
Note that the exact usage of this depends on whether or not wxUSE_STL is
- enabled. If wxUSE_STL is enabled, wxStringBuffer creates a separate empty
+ enabled. If wxUSE_STL is enabled, wxStringBuffer creates a separate empty
character buffer, and if wxUSE_STL is disabled, it uses GetWriteBuf() from
- wxString, keeping the same buffer wxString uses intact. In other words,
- relying on wxStringBuffer containing the old wxString data is not a good
+ wxString, keeping the same buffer wxString uses intact. In other words,
+ relying on wxStringBuffer containing the old wxString data is not a good
idea if you want to build your program both with and without wxUSE_STL.
@library{wxbase}
/**
@class wxString
+ The wxString class has been completely rewritten for wxWidgets 3.0
+ and this change was actually the main reason for the calling that
+ version wxWidgets 3.0.
+
wxString is a class representing a Unicode character string.
wxString uses @c std::string internally to store its content
unless this is not supported by the compiler or disabled
- specifically when building wxWidgets. Therefore wxString
- inherits many features from @c std::string. Most
- implementations of @c std::string are thread-safe and don't
- use reference counting. By default, wxString uses @c std::string
- internally even if wxUSE_STL is not defined.
-
- wxWidgets 3.0 wxString internally uses UCS-2 (basically 2-byte per
- character wchar_t) under Windows and UTF-8 under Unix, Linux and
- OS X to store its content. Much work has been done to make existing
- code using ANSI string literals work as before. If you need to have a
- wxString that uses wchar_t on Unix and Linux, too, you can specify
- this on the command line with the @c configure @c --disable-utf8 switch.
- As a consequence of this change, iterating over a wxString by index
- can become inefficient in UTF8 mode and iterators should be used instead:
+ specifically when building wxWidgets and it therefore inherits
+ many features from @c std::string. Most implementations of
+ @c std::string are thread-safe and don't use reference counting.
+ By default, wxString uses @c std::string internally even if
+ wxUSE_STL is not defined.
+
+ wxString now internally uses UTF-16 under Windows and UTF-8 under
+ Unix, Linux and OS X to store its content. Note that when iterating
+ over a UTF-16 string under Windows, the user code has to take care
+ of surrogate pair handling whereas Windows itself has built-in
+ support pairs in UTF-16, such as for drawing strings on screen.
+
+ Much work has been done to make existing code using ANSI string literals
+ work as before. If you nonetheless need to have a wxString that uses wchar_t
+ on Unix and Linux, too, you can specify this on the command line with the
+ @c configure @c --disable-utf8 switch or you can consider using wxUString
+ or std::wstring instead.
+
+ Accessing a UTF-8 string by index can be very inefficient because
+ a single character is represented by a variable number of bytes so that
+ the entire string has to be parsed in order to find the character.
+ Since iterating over a string by index is a common programming technique and
+ was also possible and encouraged by wxString using the access operator[]()
+ wxString implements caching of the last used index so that iterating over
+ a string is a linear operation even in UTF-8 mode.
+
+ It is nonetheless recommended to use iterators (instead of index based
+ access) like this:
@code
wxString s = "hello";
append something to a C string (including literal constants), so to do this it
should be converted to a wxString first.
+ @li insert()
+ @li append()
@li operator<<()
@li operator+=()
@li operator+()
@li wxString()
@li operator=()
@li ~wxString()
+ @li assign()
The MakeXXX() variants modify the string in place, while the other functions
return a new string which contains the original text converted to the upper or
@li Upper()
@li MakeLower()
@li Lower()
+ @li MakeCapitalized()
+ @li Capitalize()
Many functions below take a character index in the string. As with C
strings and arrays, the indices start from 0, so the first character of a
failure in @ref overview_debugging "debug build", but no checks are
done in release builds.
This section also contains both implicit and explicit conversions to C style
- strings. Although implicit conversion is quite convenient, you are advised
- to use explicit wc_str() method for the sake of clarity.
+ strings. Although implicit conversion is quite convenient, you are advised
+ to use wc_str() for the sake of clarity.
@li GetChar()
@li GetWritableChar()
@li mb_str()
@li fn_str()
- The default comparison function Cmp() is case-sensitive and
- so is the default version of IsSameAs(). For case
- insensitive comparisons you should use CmpNoCase() or
- give a second parameter to IsSameAs. This last function is may be more
+ The default comparison function Cmp() is case-sensitive and so is the default
+ version of IsSameAs(). For case insensitive comparisons you should use CmpNoCase()
+ or give a second parameter to IsSameAs(). This last function is maybe more
convenient if only equality of the strings matters because it returns a boolean
@true value if the strings are the same and not 0 (which is usually @false
in C) as Cmp() does.
with some predefined prefix and is more efficient than doing direct string
comparison as you would also have to precalculate the length of the prefix.
+ @li compare()
@li Cmp()
@li CmpNoCase()
@li IsSameAs()
when working with some external API which requires the caller to provide
a writable buffer.
+ @li reserve()
+ @li resize()
@li Alloc()
@li Shrink()
@li wxStringBuffer
These functions return the string length and check whether the string
is empty or they empty it.
+ @li length()
+ @li size()
@li Len()
@li IsEmpty()
@li operator!()
@li Empty()
@li Clear()
- These functions allow you to extract a substring from the string. The
+ These functions allow you to extract a substring from the string. The
original string is not modified and the function returns the extracted
substring.
+ @li substr()
@li Mid()
@li operator()()
@li Left()
These functions replace the standard @e strchr() and @e strstr()
functions.
+ @li find()
+ @li rfind()
+ @li replace()
@li Find()
@li Replace()
::Objects, ::wxEmptyString,
@see @ref overview_string "wxString overview", @ref overview_unicode
- "Unicode overview"
+ "Unicode overview", wxUString
*/
class wxString
{
wxString BeforeLast(wxUniChar ch) const;
+ /**
+ Return the copy of the string with the first string character in the
+ upper case and the subsequent ones in the lower case.
+
+ @since 2.9.0
+
+ @see MakeCapitalized()
+ */
+ wxString Capitalize() const;
+
/**
Empties the string and frees memory occupied by it.
See also: Empty()
//@{
/**
Converts C string encoded in UTF-8 to wxString.
- Note that this method assumes that @a s is a valid UTF-8 sequence and
- doesn't do any validation in release builds, it's validity is only checked in
- debug builds.
+
+ If @a s is not a valid UTF-8 string, an empty string is returned.
+
+ Notice that when using UTF-8 wxWidgets build there is a more efficient
+ alternative to this function called FromUTF8Unchecked() which, unlike
+ this one, doesn't check that the input string is valid.
+
+ @since 2.8.4
*/
static wxString FromUTF8(const char* s);
static wxString FromUTF8(const char* s, size_t len);
//@}
+ //@{
+ /**
+ Converts C string encoded in UTF-8 to wxString without checking its
+ validity.
+
+ This method assumes that @a s is a valid UTF-8 sequence and doesn't do
+ any validation (although an assert failure is triggered in debug builds
+ if the string is invalid). Only use it if you are absolutely sure that
+ @a s is a correct UTF-8 string (e.g. because it comes from another
+ library using UTF-8) and if the performance matters, otherwise use
+ slower (in UTF-8 build) but safer FromUTF8(). Passing a bad UTF-8
+ string to this function will result in creating a corrupted wxString
+ and all the subsequent operations on it will be undefined.
+
+ @since 2.8.9
+ */
+ static wxString FromUTF8Unchecked(const char* s);
+ static wxString FromUTF8Unchecked(const char* s, size_t len);
+ //@}
+
/**
Returns the character at position @a n (read-only).
*/
/**
Returns this string converted to the lower case.
+
+ @see MakeLower()
*/
wxString Lower() const;
void LowerCase();
/**
- Converts all characters to lower case and returns the result.
+ Converts the first characters of the string to the upper case and all
+ the subsequent ones to the lower case and returns the result.
+
+ @since 2.9.0
+
+ @see Capitalize()
+ */
+ wxString& MakeCapitalized();
+
+ /**
+ Converts all characters to lower case and returns the reference to the
+ modified string.
+
+ @see Lower()
*/
wxString& MakeLower();
/**
- Converts all characters to upper case and returns the result.
+ Converts all characters to upper case and returns the reference to the
+ modified string.
+
+ @see Upper()
*/
wxString& MakeUpper();
Same as utf8_str().
*/
const char* ToUTF8() const;
- const wxCharBuffer ToUF8() const;
+ const wxCharBuffer ToUTF8() const;
//@}
/**
/**
Returns this string converted to upper case.
+
+ @see MakeUpper()
*/
wxString Upper() const;
convertible to both @c const @c char* and to @c const @c wchar_t*.
Given this ambiguity it is mostly better to use wc_str(), mb_str() or
utf8_str() instead.
-
+
Please see the @ref overview_unicode "Unicode overview" for more
information about it.
-
+
Note that the returned value is not convertible to @c char* or
@c wchar_t*, use char_str() or wchar_str() if you need to pass
string value to a function expecting non-const pointer.
-
+
@see wc_str(), utf8_str(), c_str(), mb_str(), fn_str()
*/
const wxCStrData c_str() const;
/**
Returns the multibyte (C string) representation of the string
- using @e conv's wxMBConv::cWC2MB method and returns wxCharBuffer.
-
+ using @e conv's wxMBConv::cWC2MB method and returns wxCharBuffer.
+
@see wc_str(), utf8_str(), c_str(), wxMBConv
*/
const wxCharBuffer mb_str(const wxMBConv& conv = wxConvLibc) const;
Converts the strings contents to UTF-8 and returns it either as a
temporary wxCharBuffer object or as a pointer to the internal
string contents in UTF-8 build.
-
+
@see wc_str(), c_str(), mb_str()
*/
const char* utf8_str() const;
//@{
/**
Converts the strings contents to the wide character represention
- and returns it as a temporary wxWCharBuffer object (Unix and OS X)
+ and returns it as a temporary wxWCharBuffer object (Unix and OS X)
or returns a pointer to the internal string contents in wide character
mode (Windows).
The macro wxWX2WCbuf is defined as the correct return
type (without const).
- @see uf8_str(), c_str(), mb_str(), fn_str(), wchar_str()
+ @see utf8_str(), c_str(), mb_str(), fn_str(), wchar_str()
*/
const wchar_t* wc_str() const;
const wxWCharBuffer wc_str() const;
*/
wxWritableWCharBuffer wchar_str() const;
- /**
+ /**
Explicit conversion to C string in the internal representation (either
wchar_t* or UTF-8-encoded char*, depending on the build).
*/
@endcode
Note that the exact usage of this depends on whether or not wxUSE_STL is
- enabled. If wxUSE_STL is enabled, wxStringBuffer creates a separate empty
+ enabled. If wxUSE_STL is enabled, wxStringBuffer creates a separate empty
character buffer, and if wxUSE_STL is disabled, it uses GetWriteBuf() from
- wxString, keeping the same buffer wxString uses intact. In other words,
- relying on wxStringBuffer containing the old wxString data is not a good
+ wxString, keeping the same buffer wxString uses intact. In other words,
+ relying on wxStringBuffer containing the old wxString data is not a good
idea if you want to build your program both with and without wxUSE_STL.
Note that SetLength @c must be called before wxStringBufferLength destructs.
projects / wxWidgets.git / blobdiff