either look up a function using the alphabetical listing of them or find it in
the corresponding topic.
-\section{Alphabetical functions and macros list}
+\section{Alphabetical functions and macros list}\label{functionsalphabetically}
\helpref{CLASSINFO}{classinfo}\\
\helpref{copystring}{copystring}\\
\helpref{IMPLEMENT\_CLASS}{implementclass}\\
\helpref{IMPLEMENT\_DYNAMIC\_CLASS2}{implementdynamicclass2}\\
\helpref{IMPLEMENT\_DYNAMIC\_CLASS}{implementdynamicclass}\\
-\helpref{ngettext}{ngettext}\\
\helpref{wxCONCAT}{wxconcat}\\
\helpref{WXDEBUG\_NEW}{debugnew}\\
\helpref{WXTRACELEVEL}{tracelevel}\\
\helpref{wxBITMAP}{wxbitmapmacro}\\
\helpref{wxBeginBusyCursor}{wxbeginbusycursor}\\
\helpref{wxBell}{wxbell}\\
+\helpref{wxCHANGE\_UMASK}{wxchangeumask}\\
\helpref{wxCHECK}{wxcheck}\\
\helpref{wxCHECK2\_MSG}{wxcheck2msg}\\
\helpref{wxCHECK2}{wxcheck2}\\
\helpref{wxCHECK\_MSG}{wxcheckmsg}\\
\helpref{wxCHECK\_RET}{wxcheckret}\\
\helpref{wxCHECK\_VERSION}{wxcheckversion}\\
+\helpref{wxCHECK\_VERSION\_FULL}{wxcheckversionfull}\\
\helpref{wxCHECK\_W32API\_VERSION}{wxcheckw32apiversion}\\
\helpref{wxClientDisplayRect}{wxclientdisplayrect}\\
\helpref{wxClipboardOpen}{functionwxclipboardopen}\\
\helpref{wxGetCwd}{wxgetcwd}\\
\helpref{wxGetDiskSpace}{wxgetdiskspace}\\
\helpref{wxGetDisplayName}{wxgetdisplayname}\\
+\helpref{wxGetDisplaySize}{wxdisplaysize}\\
+\helpref{wxGetDisplaySizeMM}{wxdisplaysizemm}\\
\helpref{wxGetElapsedTime}{wxgetelapsedtime}\\
\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
\helpref{wxGetEnv}{wxgetenv}\\
\helpref{wxGetFullHostName}{wxgetfullhostname}\\
\helpref{wxGetHomeDir}{wxgethomedir}\\
\helpref{wxGetHostName}{wxgethostname}\\
+\helpref{wxGetKeyState}{wxgetkeystate}\\
\helpref{wxGetLocalTimeMillis}{wxgetlocaltimemillis}\\
\helpref{wxGetLocalTime}{wxgetlocaltime}\\
\helpref{wxGetMousePosition}{wxgetmouseposition}\\
\helpref{wxMakeMetafilePlaceable}{wxmakemetafileplaceable}\\
\helpref{wxMatchWild}{wxmatchwild}\\
\helpref{wxMessageBox}{wxmessagebox}\\
+\helpref{wxMilliSleep}{wxmillisleep}\\
+\helpref{wxMicroSleep}{wxmicrosleep}\\
\helpref{wxMkdir}{wxmkdir}\\
\helpref{wxMutexGuiEnter}{wxmutexguienter}\\
\helpref{wxMutexGuiLeave}{wxmutexguileave}\\
\helpref{wxNow}{wxnow}\\
\helpref{wxOnAssert}{wxonassert}\\
\helpref{wxOpenClipboard}{wxopenclipboard}\\
+\helpref{wxParseCommonDialogsFilter}{wxparsecommondialogsfilter}\\
\helpref{wxPathOnly}{wxpathonly}\\
\helpref{wxPostDelete}{wxpostdelete}\\
\helpref{wxPostEvent}{wxpostevent}\\
\helpref{wxUnix2DosFilename}{wxunix2dosfilename}\\
\helpref{wxUnsetEnv}{wxunsetenv}\\
\helpref{wxUsleep}{wxusleep}\\
+\helpref{wxVaCopy}{wxvacopy}\\
\helpref{wxVsnprintf}{wxvsnprintf}\\
\helpref{wxWakeUpIdle}{wxwakeupidle}\\
\helpref{wxWriteResource}{wxwriteresource}\\
\helpref{wxYield}{wxyield}\\
\helpref{wx\_const\_cast}{wxconstcastraw}\\
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw}\\
\helpref{wx\_static\_cast}{wxstaticcastraw}\\
\helpref{\_}{underscore}\\
\helpref{\_T}{underscoret}
\item {\tt wxMAJOR\_VERSION} is the major version of wxWidgets
\item {\tt wxMINOR\_VERSION} is the minor version of wxWidgets
\item {\tt wxRELEASE\_NUMBER} is the release number
+\item {\tt wxSUBRELEASE\_NUMBER} is the subrelease number which is $0$ for all
+official releases
\end{itemize}
For example, the values or these constants for wxWidgets 2.1.15 are 2, 1 and
three version numbers above: for 2.1.15, it is 2115 and it is 2200 for
wxWidgets 2.2.
+The subrelease number is only used for the sources in between official releases
+and so normally is not useful.
+
\wxheading{Include files}
<wx/version.h> or <wx/defs.h>
+\membersection{wxCHECK\_GCC\_VERSION}\label{wxcheckgccversion}
+
+\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+
+Returns $1$ if the compiler being used to compile the code is GNU C++
+compiler (g++) version major.minor.release or greater. Otherwise, and also if
+the compiler is not GNU C++ at all, returns $0$.
+
+
\membersection{wxCHECK\_VERSION}\label{wxcheckversion}
\func{bool}{wxCHECK\_VERSION}{\param{}{major, minor, release}}
\end{verbatim}
-\membersection{wxCHECK\_GCC\_VERSION}\label{wxcheckgccversion}
+\membersection{wxCHECK\_VERSION\_FULL}\label{wxcheckversionfull}
-\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+\func{bool}{wxCHECK\_VERSION\_FULL}{\param{}{major, minor, release, subrel}}
-Returns $1$ if the compiler being used to compile the code is GNU C++
-compiler (g++) version major.minor.release or greater. Otherwise, and also if
-the compiler is not GNU C++ at all, returns $0$.
+Same as \helpref{wxCHECK\_VERSION}{wxcheckversion} but also checks that
+\texttt{wxSUBRELEASE\_NUMBER} is at least \arg{subrel}.
\membersection{wxCHECK\_W32API\_VERSION}\label{wxcheckw32apiversion}
\wxheading{Include files}
-<wx/utils.h>
+<wx/filefn.h>
\wxheading{See also}
get the next matching file. Neither will report the current directory "." or the
parent directory "..".
+\wxheading{Warning}
+
+As of wx 2.5.2, these functions are not thread-safe! (use static variables)
+
{\it spec} may contain wildcards.
{\it flags} may be wxDIR for restricting the query to directories, wxFILE for files or zero for either.
slashes with backslashes.
+\membersection{wxCHANGE\_UMASK}\label{wxchangeumask}
+
+\func{}{wxCHANGE\_UMASK}{\param{int }{mask}}
+
+Under Unix this macro changes the current process umask to the given value,
+unless it is equal to $-1$ in which case nothing is done, and restores it to
+the original value on scope exit. It works by declaring a variable which sets
+umask to \arg{mask} in its constructor and restores it in its destructor.
+
+Under other platforms this macro expands to nothing.
+
+
\membersection{::wxConcatFiles}\label{wxconcatfiles}
\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
\func{bool}{wxMatchWild}{\param{const wxString\& }{pattern}, \param{const wxString\& }{text}, \param{bool}{ dot\_special}}
-Returns true if the {\it pattern}\/ matches the {\it text}\/; if {\it
+Returns true if the \arg{pattern}\/ matches the {\it text}\/; if {\it
dot\_special}\/ is true, filenames beginning with a dot are not matched
with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
-Makes the directory {\it dir}, returning true if successful.
+Makes the directory \arg{dir}, returning true if successful.
{\it perm} is the access mask for the directory for the systems on which it is
supported (Unix) and doesn't have effect for the other ones.
+\membersection{::wxParseCommonDialogsFilter}\label{wxparsecommondialogsfilter}
+
+\func{int}{wxParseCommonDialogsFilter}{\param{const wxString\& }{wildCard}, \param{wxArrayString\& }{descriptions}, \param{wxArrayString\& }{filters}}
+
+Parses the \arg{wildCard}, returning the number of filters.
+Returns 0 if none or if there's a problem.
+The arrays will contain an equal number of items found before the error.
+On platforms where native dialogs handle only one filter per entry,
+entries in arrays are automatically adjusted.
+\arg{wildCard} is in the form:
+\begin{verbatim}
+ "All files (*)|*|Image Files (*.jpeg *.png)|*.jpg;*.png"
+\end{verbatim}
+
\membersection{::wxRemoveFile}\label{wxremovefile}
\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
-Removes {\it file}, returning true if successful.
+Removes \arg{file}, returning true if successful.
\membersection{::wxRenameFile}\label{wxrenamefile}
\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
-Renames {\it file1} to {\it file2}, returning true if successful.
+Renames \arg{file1} to \arg{file2}, returning true if successful.
\membersection{::wxRmdir}\label{wxrmdir}
-\section{String functions}
+\section{String functions}\label{stringfunctions}
\membersection{::copystring}\label{copystring}
This function is deprecated, use \helpref{wxString}{wxstring} class instead.
-\membersection{ngettext}\label{ngettext}
-
-\func{const wxChar *}{ngettext}{\param{const char *}{str}, \param{const char *}{strPlural}, \param{size\_t }{n}}
-
-This macro expands into a call to plural form version of
-\helpref{wxGetTranslation}{wxgettranslation}
-function, so it marks the message for the extraction by {\tt xgettext} just as
-\helpref{wxTRANSLATE}{wxtranslate} does, but also returns the translation of
-the string for the current locale during execution, either singular or plural
-form depending on the value of \arg{n}.
-
-\wxheading{See also}
-
-\helpref{\_}{underscore}
-
-
\membersection{::wxGetTranslation}\label{wxgettranslation}
\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
The \arg{strPlural} parameter is the plural form (in English).
The parameter \arg{n} is used to determine the plural form. If no
message catalog is found \arg{str} is returned if `n == 1',
-otherwise \arg{strPlural}. The \helpref{ngettext}{ngettext} macro is defined
-to do the same thing.
+otherwise \arg{strPlural}.
See \urlref{GNU gettext manual}{http://www.gnu.org/manual/gettext/html\_chapter/gettext\_10.html\#SEC150} for additional information on plural forms handling.
+Both versions call \helpref{wxLocale::GetString}{wxlocalegetstring}.
+
\membersection{::wxIsEmpty}\label{wxisempty}
\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
\func{const wxChar *}{wxTRANSLATE}{\param{const char *}{s}}
This macro doesn't do anything in the program code -- it simply expands to the
-value of its argument (expand in Unicode build where it is equivalent to
+value of its argument (except in Unicode build where it is equivalent to
\helpref{wxT}{wxt} which makes it unnecessary to use both wxTRANSLATE and wxT
with the same string which would be really unreadable).
However it does have a purpose and it is to mark the literal strings for the
extraction into the message catalog created by {\tt xgettext} program. Usually
this is achieved using \helpref{\_()}{underscore} but that macro not only marks
-the string for extraction but also expands into
+the string for extraction but also expands into a
\helpref{wxGetTranslation}{wxgettranslation} function call which means that it
-cannot be used in some situations, notably for the static arrays
+cannot be used in some situations, notably for static array
initialization.
Here is an example which should make it more clear: suppose that you have a
static array of strings containing the weekday names and which have to be
-translated (note that it is a bad example, really, as
+translated (note that it is a bad example, really, as
\helpref{wxDateTime}{wxdatetime} already can be used to get the localized week
day names already). If you write
no translations for the weekday names in the program message catalog and
wxGetTranslation wouldn't find them.
-
-
\membersection{::wxVsnprintf}\label{wxvsnprintf}
\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argPtr}}
Don't confuse this macro with \helpref{\_T()}{underscoret}!
-\wxheading{See also}
-
-\helpref{ngettext}{ngettext}
-
-
\membersection{\_T}\label{underscoret}
\func{wxString}{wxFileSelector}{\param{const wxString\& }{message}, \param{const wxString\& }{default\_path = ""},\\
\param{const wxString\& }{default\_filename = ""}, \param{const wxString\& }{default\_extension = ""},\\
- \param{const wxString\& }{wildcard = ``*.*''}, \param{int }{flags = 0}, \param{wxWindow *}{parent = ""},\\
+ \param{const wxString\& }{wildcard = "*.*"}, \param{int }{flags = 0}, \param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1}}
Pops up a file selector box. In Windows, this is the common file selector
no default filename will be supplied. The wildcard determines what files
are displayed in the file selector, and file extension supplies a type
extension for the required filename. Flags may be a combination of wxOPEN,
-wxSAVE, wxOVERWRITE\_PROMPT, wxHIDE\_READONLY, wxFILE\_MUST\_EXIST, wxMULTIPLE or 0.
+wxSAVE, wxOVERWRITE\_PROMPT, wxFILE\_MUST\_EXIST, wxMULTIPLE or 0.
Both the Unix and Windows versions implement a wildcard filter. Typing a
filename containing wildcards (*, ?) in the filename text item, and
\membersection{::wxGetPasswordFromUser}\label{wxgetpasswordfromuser}
-\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
- \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL}}
+\func{wxString}{wxGetPasswordFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
+ \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = wxDefaultCoord}, \param{int}{ y = wxDefaultCoord}, \param{bool}{ centre = true}}
Similar to \helpref{wxGetTextFromUser}{wxgettextfromuser} but the text entered
in the dialog is not shown on screen but replaced with stars. This is intended
\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
\param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
- \param{int}{ x = -1}, \param{int}{ y = -1}, \param{bool}{ centre = true}}
+ \param{int}{ x = wxDefaultCoord}, \param{int}{ y = wxDefaultCoord}, \param{bool}{ centre = true}}
Pop up a dialog box with title set to {\it caption}, {\it message}, and a
\rtfsp{\it default\_value}. The user may type in text and press OK to return this text,
\param{bool }{showAtStartup = true}}
This function shows a "startup tip" to the user. The return value is the
-state of the ``Show tips at startup'' checkbox.
+state of the `Show tips at startup' checkbox.
\docparam{parent}{The parent window for the modal dialog}
-\section{Math functions}
+\section{Math functions}\label{mathfunctions}
\wxheading{Include files}
\func{}{wxDYNLIB\_FUNCTION}{\param{}{type}, \param{}{name}, \param{}{dynlib}}
When loading a function from a DLL you always have to cast the returned
-\tt{void *} pointer to the correct type and, even more annoyingly, you have to
+{\tt void *} pointer to the correct type and, even more annoyingly, you have to
repeat this type twice if you want to declare and define a function pointer all
in one line
this language feature but still take advantage of it when it is available.
+\membersection{::wxGetKeyState}\label{wxgetkeystate}
+
+\func{bool}{wxGetKeyState}{\param{wxKeyCode }{key}}
+
+Returns \true if the key parameter is currently pressed on the keyboard, or
+with modifier keys, (caps lock, etc) if the key is active (the led light is
+on).
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{wxLL}\label{wxll}
\func{wxLongLong\_t}{wxLL}{\param{}{number}}
\helpref{wxLL}{wxll}, \helpref{wxLongLong}{wxlonglong}
+\membersection{wxVaCopy}\label{wxvacopy}
+
+\func{void}{wxVaCopy}{\param{va\_list }{argptrDst}, \param{va\_list}{argptrSrc}}
+
+This macro is the same as the standard C99 \texttt{va\_copy} for the compilers
+which support it or its replacement for those that don't. It must be used to
+preserve the value of a \texttt{va\_list} object if you need to use it after
+passing it to another function because it can be modified by the latter.
+
+As with \texttt{va\_start}, each call to \texttt{wxVaCopy} must have a matching
+\texttt{va\_end}.
+
+
\membersection{::wxWriteResource}\label{wxwriteresource}
\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
\wxheading{See also}
-\helpref{wx\_static\_cast}{wxstaticcastraw}\\
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw},\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}
+
+
+\membersection{wx\_reinterpret\_cast}\label{wxreinterpretcastraw}
+
+\func{T}{wx\_reinterpret\_cast}{T, x}
+
+Same as \texttt{reinterpret\_cast<T>(x)} if the compiler supports reinterpret cast or
+\texttt{(T)x} for old compilers.
+
+\wxheading{See also}
+
+\helpref{wx\_const\_cast}{wxconstcastraw},\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}
\membersection{wx\_static\_cast}\label{wxstaticcastraw}
\wxheading{See also}
-\helpref{wx\_const\_cast}{wxconstcastraw}\\
+\helpref{wx\_const\_cast}{wxconstcastraw},\\
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw}
\item wxTRACE\_OleCalls: trace OLE method calls (Win32 only)
\end{itemize}
-The third version of the function only logs the message if all the bit
+{\bf Caveats:} since both the mask and the format string are strings,
+this might lead to function signature confusion in some cases:
+if you intend to call the format string only version of wxLogTrace,
+then add a \%s format string parameter and then supply a second string parameter for that \%s, the string mask version of wxLogTrace will erroneously get called instead, since you are supplying two string parameters to the function.
+In this case you'll unfortunately have to avoid having two leading
+string parameters, e.g. by adding a bogus integer (with its \%d format string).
+
+The third version of the function only logs the message if all the bits
corresponding to the {\it mask} are set in the wxLog trace mask which can be
set by \helpref{SetTraceMask}{wxlogsettracemask}. This version is less
flexible than the previous one because it doesn't allow defining the user
<wx/timer.h>
+\membersection{::wxMicroSleep}\label{wxmicrosleep}
+
+\func{void}{wxMicroSleep}{\param{unsigned long}{ microseconds}}
+
+Sleeps for the specified number of microseconds. The microsecond resolution may
+not, in fact, be available on all platforms (currently only Unix platforms with
+nanosleep(2) may provide it) in which case this is the same as
+\helpref{wxMilliSleep}{wxmillisleep}(\arg{microseconds}$/1000$).
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxMilliSleep}\label{wxmillisleep}
+
+\func{void}{wxMilliSleep}{\param{unsigned long}{ milliseconds}}
+
+Sleeps for the specified number of milliseconds. Notice that usage of this
+function is encouraged instead of calling usleep(3) directly because the
+standard usleep() function is not MT safe.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{::wxNow}\label{wxnow}
\func{wxString}{wxNow}{\void}
\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
-Sleeps for the specified number of milliseconds. Notice that usage of this
-function is encouraged instead of calling usleep(3) directly because the
-standard usleep() function is not MT safe.
-
-\wxheading{Include files}
-
-<wx/utils.h>
+This function is deprecated because its name is misleading: notice that the
+argument is in milliseconds, not microseconds. Please use either
+\helpref{wxMilliSleep}{wxmillisleep} or \helpref{wxMicroSleep}{wxmicrosleep}
+depending on the resolution you need.
\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2} macro.
Also note that Microsoft Visual C++ has a bug which results in compiler errors
-if you use this macro with ``Program Database For Edit And Continue''
-(\texttt{/ZI}) option, so you shouldn't use it (``Program Database''
+if you use this macro with `Program Database For Edit And Continue'
+(\texttt{/ZI}) option, so you shouldn't use it (`Program Database'
(\texttt{/Zi}) is ok though) for the code making use of this macro.
\wxheading{See also}
projects / wxWidgets.git / blobdiff