'[1219035] cleanup: miscellaneous' and minor source cleaning.

[wxWidgets.git] / wxPython / distrib / wxPythonFull.spec.in

diff --git a/wxPython/distrib/wxPythonFull.spec.in b/wxPython/distrib/wxPythonFull.spec.in
index 5864b5a0fd49ccbf0bb17d77477238e376c428db..898695b763eadc4e55ce3666f29599296b6b80e1 100644 (file)
--- a/wxPython/distrib/wxPythonFull.spec.in
+++ b/wxPython/distrib/wxPythonFull.spec.in
@@ -1,196 +1,425 @@
-%define pref   %{_prefix}
-%define python         @PYTHON@
-%define pyver  @PYVER@
-%define debug  @DEBUG@
-%define port   @PORT@
-%define lcport         @LCPORT@
-%define tarname @TARNAME@
-%define version @VERSION@
-%define ver2    @VER2@
-%define release 1
-%define wxpref  %{pref}/lib/wxPython
-
-# Should --enable-debug_flag be used in release builds?
-%define debug_flag 1
+#----------------------------------------------------------------------
+# Name:        wxPython.spec
+# Purpose:     RPM Build and packaging instructions
+#
+# Author:      Robin Dunn
+#
+# RCS-ID:      $Id$
+# Copyright:   (c) 2004 by Total Control Software
+# Licence:     wxWindows license
+#----------------------------------------------------------------------
+
+
+# The following values can be set on the rpmbuild command line with
+# --define 'name VALUE'  If no value is set on the command line then
+# the default value set here will be used instead.
+
+
+# Which version of Python to build with.  Used to assemble python
+# binary name so use '2.3', '2.4', etc.
+%if %{?pyver:0}%{!?pyver:1}
+%define pyver 2.4
+%endif

 
 
 
 

-%if %{debug}
-    %define name      wxPython%{port}-py%{pyver}-dbg
-    %define othername wxPython%{port}-py%{pyver}
-%else
-    %define name      wxPython%{port}-py%{pyver}
-    %define othername wxPython%{port}-py%{pyver}-dbg
+# Which wxWidgets port to build and use.  Current acceptable values
+# are 'gtk' and 'gtk2'.
+%if %{?port:0}%{!?port:1}
+%define port gtk2

 %endif
 
 
 %endif
 
 

-%if %{debug} || %{debug_flag}
-    %define wxconfigname %{wxpref}/bin/wx%{lcport}d-%{ver2}-config
-%else
-    %define wxconfigname %{wxpref}/bin/wx%{lcport}-%{ver2}-config
+# Build in unicode mode?  Can only be used if port is gtk2, acceptable
+# values are '0' and '1'
+%if %{?unicode:0}%{!?unicode:1}
+%define unicode 1
+%endif
+
+
+# Should the builtin image and etc. libs be used, or system libs?
+# Distro specific RPMs should probably set this to 0, generic ones
+# should use 1.  
+# NOTE: I'm trying 0 for this next release to see if I can get rid of
+# this...
+%if %{?builtin_libs:0}%{!?builtin_libs:1}
+%define builtin_libs 0

 %endif
 
 
 %endif
 
 

-#----------------------------------------------------------------
-Summary:   Cross platform GUI toolkit for Python using wx%{port}
-Name:      %{name}
+# Should --enable-debug_flag be used in release builds?  Using it
+# defines __WXDEBUG__ and gives us runtime diagnostics that are turned
+# into Python exceptions.  (So turning it on is a very helpful thing
+# IMO and is recommended.)  The code is still compiled with
+# optimization flags and and without debug info and such when this
+# option is used, it simply turns on some extra code.
+%if %{?debug_flag:0}%{!?debug_flag:1}
+%define debug_flag 1
+%endif
+
+
+# Used to set the Release tag below.  I normally use it to define what
+# distro the RPM was build on and also include the version of Python
+# it was built with.  
+%if %{?release:0}%{!?release:1}
+%define release 1_py%{pyver}
+%endif
+
+
+
+#----------------------------------------------------------------------
+# Other variables used below
+
+%define pref      %{_prefix}
+%define python            /usr/bin/python%{pyver}
+%define tarname    @TARNAME@
+%define version    @VERSION@
+%define ver2       @VER2@
+
+%define chartype   %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
+%define gtktype    %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
+%define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
+
+%define wxprefbase %{pref}/lib/wxPython
+%define wxpref     %{wxprefbase}-%{version}-%{port}-%{chartype}
+%define pkgname    wxPython
+
+# turn off the generation of debuginfo rpm  (RH9) ??
+%define debug_package %{nil}
+
+
+#----------------------------------------------------------------------
+# Package definition
+#----------------------------------------------------------------------
+Name:      %{pkgname}%{ver2}
+Summary:   Cross platform GUI toolkit for Python

 Version:   %{version}
 Release:   %{release}
 Source0:   %{tarname}-%{version}.tar.gz
 Version:   %{version}
 Release:   %{release}
 Source0:   %{tarname}-%{version}.tar.gz

-License:   wxWindows Library Licence, Version 3
+License:   wx Library Licence, Version 3

 URL:       http://wxPython.org/
 Packager:  Robin Dunn <robin@alldunn.com>
 Group:     Development/Python
 URL:       http://wxPython.org/
 Packager:  Robin Dunn <robin@alldunn.com>
 Group:     Development/Python

-BuildRoot: %{_tmppath}/%{name}-buildroot
+BuildRoot: %{_tmppath}/%{pkgname}-buildroot

 Prefix:    %{pref}
 Prefix:    %{pref}

-#BuildRequires: %{python}

 
 

-Provides: wxwin
-Provides: wx%{port} = %{version}
-Provides: wxPython  = %{version}
+%description 
+Cross platform GUI toolkit for Python

 
 
 
 

-# They conflict with each other, so let them replace each other
-Obsoletes: %{othername}
-# old wxPython packages
-Obsoletes: wxPython

 
 
 
 

-%description
-wxPython is a GUI toolkit for Python that is a wrapper around the
-wxWindows C++ GUI library.  wxPython provides a large variety of
-window types and controls, all implemented with a native look and feel
-(and native runtime speed) on the platforms it is supported on.
+%package -n %{pkgname}%{ver2}-%{port}-%{chartype}
+Summary:   Cross platform GUI toolkit for Python
+Group:     Development/Python
+Requires:  %{pkgname}-common
+Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}, wxPythonGTK%{gtktype}
+Provides:  wxPython

 
 

-This package is implemented using the %{port} port of wxWindows, and
-includes the wx%{port} shared libs and etc.

 
 

+%description -n %{pkgname}%{ver2}-%{port}-%{chartype}
+wxPython is a GUI toolkit for the Python programming language. It
+ allows Python programmers to create programs with a robust, highly
+functional graphical user interface, simply and easily. It is
+implemented as a Python extension module (native code) that wraps the
+popular wxWidgets cross platform GUI library, which is written in C++.

 
 

-%package devel
-Summary: wxPython%{port} development files
-Group: Development/Libraries
-Requires: wxPython%{port} = %{version}
+wxPython is a cross-platform toolkit. The same program will usually
+run on multiple platforms without modification. Currently supported
+platforms are 32-bit Microsoft Windows, most Unix or unix-like
+systems, and Macintosh OS X.
+
+This package contains the wxPython runtime files built for the
+wxWidgets %{port} port with %{chartype} character type.
+
+
+
+
+
+%package -n %{pkgname}-common-%{port}-%{chartype}
+Summary: Common files for needed by all wxPython runtimes
+Group: Development/Python
+Provides: %{pkgname}-common

 
 

+# They obsolete each other so any of them can be installed over another
+# without conflicts
+Obsoletes: %{pkgname}-common-gtk-ansi
+Obsoletes: %{pkgname}-common-gtk2-ansi
+Obsoletes: %{pkgname}-common-gtk2-unicode

 
 

-%description devel
+%description -n %{pkgname}-common-%{port}-%{chartype}
+This package contains the common files needed by any version of the
+wxPython runtime.  This pacakge also installs a wx.pth file which will
+determine which of the installed runtimes is the default version of
+wxPython that is imported automatically with a bare "import wx".
+
+
+
+
+
+%package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
+Summary: wxPython development files
+Group: Development/Libraries
+Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
+
+%description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}

 This packages contains the headers and etc. for building apps or
 This packages contains the headers and etc. for building apps or

-Python extension modules that use the same wx%{port} shared libraries
+Python extension modules that use the same wxWidgets shared libraries

 that wxPython uses.
 
 that wxPython uses.
 

-#----------------------------------------------------------------
+
+
+#----------------------------------------------------------------------

 %prep
 %setup -q -n %{tarname}-%{version}
 
 
 %prep
 %setup -q -n %{tarname}-%{version}
 
 

-#----------------------------------------------------------------
+#----------------------------------------------------------------------

 %build
 %build

-if [ "$SMP" != "" ]; then
-    MAKE="make -j$SMP"
-else
-    MAKE="make"
-fi

 
 

-mkdir build
-cd build
+WXDIR=`pwd`

 
 

-# Configure, trying to reduce dependencies
-../configure --with-%{lcport} \
+# Configure and build wxWidgets
+mkdir bld
+cd bld
+../configure \
+%if %{using_gtk1}
+       --with-gtk=1 \
+%else 
+       --with-gtk=2 \
+%endif

        --prefix=%{wxpref} \
        --prefix=%{wxpref} \

-       --disable-soname \
-       --enable-rpath=%{wxpref}/lib \
+       --enable-monolithic \
+       --disable-rpath \

        --with-opengl \
        --with-opengl \

-%if %{debug}
-       --enable-debug \
-%else
+       --with-gnomeprint \
+       --enable-geometry \

        --enable-optimise \
        --enable-optimise \

+       --enable-sound  --with-sdl \
+       --enable-display \
+%if %{unicode}
+       --enable-unicode \
+%else
+       --disable-unicode \
+%endif

 %if %{debug_flag}
        --enable-debug_flag \
 %endif
 %if %{debug_flag}
        --enable-debug_flag \
 %endif

-%endif
+       --disable-debugreport \
+%if %{builtin_libs}

        --with-libjpeg=builtin \
        --with-libpng=builtin \
        --with-libtiff=builtin \
        --with-zlib=builtin \
        --with-libjpeg=builtin \
        --with-libpng=builtin \
        --with-libtiff=builtin \
        --with-zlib=builtin \

-
-##     --enable-debug_flag \
-##     --with-odbc \
+%endif

 
 
 
 

-# Build wxWindows
-$MAKE
+make 
+make -C contrib/src/animate 
+make -C contrib/src/gizmos 
+make -C contrib/src/stc

 
 

-cd ../locale
-make allmo

 
 
 
 

-# ** Unfortunately we have to do a bit of installation here so wxPython
-# can be built.  Perhaps wx-config should be changed to be able to be
-# used from the build dir, maybe with an --inplace flag...  Move these
-# three lines to %install if/when that happens.
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-cd ../build
-make prefix=$RPM_BUILD_ROOT%{wxpref} install
-
-
-# Now build wxPython
-cd ../wxPython
+# Build wxPython
+cd $WXDIR/wxPython

 %{python} setup.py \
 %{python} setup.py \

-       IN_CVS_TREE=1 \
-       WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \
+       WXPORT=%{port} \
+       UNICODE=%{unicode} \
+       EP_ADD_OPTS=1 \
+       NO_SCRIPTS=1 \
+       WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
+               build_ext --rpath=%{wxpref}/lib \

        build
 
 
        build
 
 

-#----------------------------------------------------------------
+
+#----------------------------------------------------------------------

 %install
 %install

-%find_lang wxstd
-cd wxPython
+
+WXDIR=`pwd`
+
+# Install wxGTK and contribs
+cd bld
+make prefix=$RPM_BUILD_ROOT%{wxpref} install
+make -C contrib/src/animate prefix=$RPM_BUILD_ROOT%{wxpref} install
+make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
+make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
+
+
+
+# Install wxPython for wxGTK
+cd $WXDIR/wxPython

 %{python} setup.py \
 %{python} setup.py \

-       IN_CVS_TREE=1 \
-       WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \
+       WXPORT=%{port} \
+       UNICODE=%{unicode} \
+       EP_ADD_OPTS=1 \
+       NO_SCRIPTS=1 \
+       WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
+               build_ext --rpath=%{wxpref}/lib \

        install \
        --root=$RPM_BUILD_ROOT
 
 
        install \
        --root=$RPM_BUILD_ROOT
 
 

+# remove the wx-config symlink, we'll redo it when installing the -devel package
+rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
+
+# make sure that debug info is stripped
+strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
+
+
+# Since I want this RPM to be as generic as possible I won't let
+# distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
+# the #! line to use the real python pathname.  Since some distros
+# install python 2.2 as python2 and others as python I can't let
+# distutils do that otherwise the dependencies will be fouled up.
+# Copy them manually instead, leaving the #!/usr/bin/env line intact. 
+cd $WXDIR/wxPython
+mkdir -p $RPM_BUILD_ROOT%{pref}/bin
+for s in \
+       helpviewer \
+       img2png \
+       img2py \
+       img2xpm \
+       pyalacarte \
+       pyalamode \
+       pycrust \
+       pywrap \
+       pyshell \
+       pywxrc \
+       xrced; do
+    cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
+done
+
+
+
+# install KDE & GNOME menu items
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
+for d in distrib/*.desktop; do
+       install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
+       install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
+done
+
+# install KDE icons
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
+install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
+install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
+install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
+install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
+install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
+install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
+
+# install Mandrake menu items
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
+cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
+?package(%{pkgname}): \\
+       command="%{_bindir}/pyshell" \\
+       needs="X11" \\
+       icon="PyCrust.png" \\
+       section="Applications/Development/Tools" \\
+       title="PyShell" \\
+       longtitle="GUI Python Shell"
+?package(%{pkgname}): \\
+       command="%{_bindir}/pycrust" \\
+       needs="X11" \\
+       icon="PyCrust.png" \\
+       section="Applications/Development/Tools" \\
+       title="PyCrust" \\
+       longtitle="GUI Python Shell with Filling"
+?package(%{pkgname}): \\
+       command="%{_bindir}/pyalamode" \\
+       needs="X11" \\
+       icon="PyCrust.png" \\
+       section="Applications/Development/Tools" \\
+       title="PyAlaMode" \\
+       longtitle="GUI Python Shell with Filling and editor windows"
+?package(%{pkgname}): \\
+       command="%{_bindir}/xrced" \\
+       needs="X11" \\
+       icon="XRCed.png" \\
+       section="Applications/Development/Tools" \\
+       title="XRCed" \\
+       longtitle="wxPython XRC resource editor"
+EOF
+
+
+#----------------------------------------------------------------------
+
+%post -n %{pkgname}%{ver2}-%{port}-%{chartype}
+if [ ! -e %{wxprefbase} ]; then
+       ln -s %{pkgname}-%{version}-%{port}-%{chartype}  %{wxprefbase}
+fi
+
+%preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
+if [ -L %{wxprefbase} ]; then
+       if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
+               rm -f %{wxprefbase}
+       fi
+fi
+
+
+
+
+%post -n %{pkgname}-common-%{port}-%{chartype}
+# This is done on Mandrake to update its menus:
+if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+%postun -n %{pkgname}-common-%{port}-%{chartype}
+# This is done on Mandrake to update its menus:
+if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+

 
 

-#----------------------------------------------------------------
+%post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
+cd %{wxpref}/bin
+ln -s ../lib/wx/config/%{port}-%{chartype}*  wx-config 
+
+%preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
+rm %{wxpref}/bin/wx-config
+
+
+#----------------------------------------------------------------------

 %clean
 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 
 
 %clean
 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 
 

-#----------------------------------------------------------------
-%post
-/sbin/ldconfig
+#----------------------------------------------------------------------

 
 

-
-#----------------------------------------------------------------
-%postun
-/sbin/ldconfig
+%files -n %{pkgname}%{ver2}-%{port}-%{chartype}
+%defattr(-,root,root)
+%doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
+%doc wxPython/docs/*
+%dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
+%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
+%dir %{wxpref}
+%dir %{wxpref}/lib
+%{wxpref}/lib/libwx_gtk*
+%{wxpref}/share

 
 
 
 
 
 

-#----------------------------------------------------------------
-%files
-%doc docs/preamble.txt
-%doc docs/licence.txt
-%doc docs/readme.txt
-%doc docs/changes.txt
-%doc wxPython/README.txt
-%doc wxPython/CHANGES.txt
+%files -n %{pkgname}-common-%{port}-%{chartype}

 %defattr(-,root,root)
 %defattr(-,root,root)

-%{wxpref}/lib/libwx*
-%{pref}/lib/python*
-%{wxpref}/share/
-%{pref}/bin/*
+%{pref}/lib*/python%{pyver}/site-packages/wxversion.*
+%{pref}/lib*/python%{pyver}/site-packages/wx.pth
+%{_bindir}/*
+%{_datadir}/applnk/Development/*
+%{_datadir}/applications/*
+%{_datadir}/icons/hicolor/*/apps/*
+%{_datadir}/pixmaps/*
+%{_libdir}/menu/*

 
 
 
 

-%files devel
+
+
+
+%files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}

 %defattr(-,root,root)
 %defattr(-,root,root)

-%{wxpref}/include/wx
+%{wxpref}/include

 %{wxpref}/lib/wx
 %{wxpref}/lib/wx

-%{wxconfigname}
-%{wxpref}/bin/wx-config
-
+%dir %{wxpref}/bin

 
 

-#----------------------------------------------------------------
-%changelog

 
 

+#----------------------------------------------------------------------

 # end of file
 # end of file