-Installing wxWidgets 2.6.2
+Installing wxWidgets for Windows
-----------------------------------------------------------
-This is wxWidgets 2.6.2 for Microsoft Windows 9x/ME, Windows NT,
+This is wxWidgets for Microsoft Windows 9x/ME, Windows NT,
Windows 2000, Windows XP and Windows CE.
These installation notes can be found in docs/msw/install.txt
"Configuring the build" below). This is a typical set of release ANSI build
libraries (release versions on left, debug on right side):
- wxbase25.lib wxbase25d.lib
- wxbase25_net.lib wxbase25d_net.lib
- wxbase25_xml.lib wxbase25d_xml.lib
- wxmsw25_core.lib wxmsw25d_core.lib
- wxmsw25_html.lib wxmsw25d_html.lib
- wxmsw25_adv.lib wxmsw25d_adv.lib
+ wxbase28.lib wxbase28d.lib
+ wxbase28_net.lib wxbase28d_net.lib
+ wxbase28_xml.lib wxbase28d_xml.lib
+ wxmsw28_core.lib wxmsw28d_core.lib
+ wxmsw28_html.lib wxmsw28d_html.lib
+ wxmsw28_adv.lib wxmsw28d_adv.lib
Their Unicode debug counterparts in wxUniversal build would be
- wxbase25ud.lib
- wxbase25ud_net.lib
- wxbase25ud_xml.lib (notice these libs are same for wxUniv and wxMSW)
- wxmswuniv25ud_core.lib
- wxmswuniv25ud_html.lib
- wxmswuniv25ud_adv.lib
+ wxbase28ud.lib
+ wxbase28ud_net.lib
+ wxbase28ud_xml.lib (notice these libs are same for wxUniv and wxMSW)
+ wxmswuniv28ud_core.lib
+ wxmswuniv28ud_html.lib
+ wxmswuniv28ud_adv.lib
These directories also contain subdirectory with wx/setup.h header. This
subdirectory is named after port, Unicode, wxUniv and debug settings and
Please note that the VC++ 6.0 project files will work for VC++ .NET also.
-Also note that you can make the project files work with VC++ 5.0 but you'll
-need to edit .dsp file by hand before this is possible (change the version in
-the .dsp file header from 6.0 to 5.0).
+VC++ 5.0 can also be used, providing Service Pack 3 is applied. Without it
+you will have trouble with internal compiler errors. It is available for
+download at: ftp://ftp.microsoft.com/developr/visualstudio/sp3/full.
Using project files (VC++ 6 and later):
know you won't need some of the libraries (i.e. html part), you don't have
to compile it. It will also produce similar variations on jpeg.lib,
png.lib, tiff.lib, zlib.lib, and regex.lib.
- If you want to build DLLs, you have to either build them one by one in
- proper order (jpeg, png, tiff, zlib, regex, expat, base, core, the rest
- in any order) or to use wx_dll.dsw workspace which has correct dependencies.
+
+ If you want to build DLL configurations in wx.dsw project you unfortunately
+ need to build them in the proper order (jpeg, png, tiff, zlib, regex, expat,
+ base, net, odbc, core, gl, html, media, qa, adv, dbgrid, xrc, aui, richtext)
+ manually because VC6 doesn't always respect the correct build order.
+
+ Alternatively, use the special wx_dll.dsw project which adds the
+ dependencies to force the correct order (but, because of this, doesn't work
+ for the static libraries) or simply redo the build several times until all
+ DLLs are linked correctly. Pleae notice that it's normal that dbgrid project
+ doesn't build if wxUSE_ODBC is set to 0 (default).
3. Open a sample project file, choose a configuration such as
Win32 Debug using Build | Set Active Configuration..., and compile.
The project files don't use precompiled headers, to save disk
See http://support.microsoft.com/?id=894573 for more information.
-Borland C++ 5.0/5.5 compilation
+Borland C++ compilation
----------------------------------------------------------------
-Compiling using the makefiles (updated 24 Sept 02):
+The minimum version required is 5.5 (last version supported by BC++ 5.0 was
+2.4.2), which can be downloaded for free from:
+http://www.borland.com/products/downloads/download_cbuilder.html
+
+The version 5.6 included in Borland C++ Builder 2006 works as well after the
+following small change: please remove the test for __WINDOWS__ from line 88
+of the file BCCDIR\include\stl\_threads.h.
+
+Compiling using the makefiles:
1. Change directory to build\msw. Type 'make -f makefile.bcc' to
make the wxWidgets core library. Ignore the compiler warnings.
Note (3): If you wish debug messages to be sent to the console in
debug mode, edit makefile.bcc and change /aa to /Tpe in link commands.
-Compiling using the IDE files for Borland C++ 5.0: not supported - please
-use version 2.4.1 (using the make utility in commandline mode works fine_
+Cmpilation succeeds with CBuilderX personal edition and CBuilder6, but
+you may have to copy make.exe from the 5.5 download to the new bin directory.
+Compiling using the IDE files for Borland C++ 5.0 and using CBuilder IDE
+(v1-v6): not supported
-Compiling using CBuilder (v1-v6): not supported - please
-use version 2.4.1 (using the make utility in commandline mode works fine_
** REMEMBER **
try deleting .pch files in build\msw\wat_* and compiling
the sample again.
+Note (5): wxUSE_STD_STRING is disabled in wx/string.h for Watcom as this
+ compiler doesn't come with standard C++ library headers by default.
+ If you install STLPort or another STL implementation, you'll need to
+ edit wx/string.h and remove the check for Digital Mars in it (search
+ for __WATCOM__).
+
+
Metrowerks CodeWarrior compilation
----------------------------------------------------------------
+** NOTE: We don't use Metrowerks compiler any more and so depend on
+** your contributions to keep it up to date. It is possible that
+** the project files mentioned below are out of date due to recently
+** added files, please add them manually if you get linking errors.
+** The authoritative list of files is in build/bakefiles/files.bkl
+
1. CodeWarrior Pro 7 project files in XML format are already
- included in wxMSW-2.6.2.zip and the setup version.
+ included in wxMSW-2.8.x.zip and the setup version.
2. Review the file include\wx\msw\setup.h (or include\wx\msw\setup0.h if
you are working from the CVS version) to make sure the settings reflect
----------------------------------------------------------------
NOTE: The makefile.gcc makefiles are for compilation under MinGW using
- native make and Windows command interpreter (command.com/cmd.exe), they
- won't work in other environments (such as UNIX or Unix-like, e.g. MSYS;
- you have to use configure instead)
+ Windows command interpreter (command.com/cmd.exe), they won't work in
+ other environments (such as UNIX or Unix-like, e.g. MSYS where you have
+ to use configure instead, see the section below)
Here are the steps required using the provided makefiles:
cd build-debug
../configure --with-msw --enable-debug --enable-debug_gdb --disable-shared
make
- make install % This step is optional, see note (8) below.
+ make install % This step is optional, see note (6) below.
cd samples/minimal
make
./minimal.exe
bakefile_gen -f dmars -b ../../samples/minimal/minimal.bkl
+Note that wxUSE_STD_STRING is disabled in wx/string.h for Digital Mars as this
+compiler doesn't come with standard C++ library headers by default. If you
+install STLPort or another STL implementation, you'll need to edit wx/string.h
+and remove the check for Digital Mars in it (search for __DMC__).
+
+
16-bit compilation is no longer supported.
Configuring the build
you should set wxUSE_GUI to 1 in setup.h.
USE_OPENGL=1
- Build wxmsw25_gl.lib library with OpenGL integration class wxGLCanvas.
+ Build wxmsw28_gl.lib library with OpenGL integration class wxGLCanvas.
You must also modify your setup.h to #define wxUSE_GLCANVAS 1. Note that
OpenGL library is always built as additional library, even in monolithic
build!
distribute wxWidgets DLLs with your application. Default value is 'custom'.
This string is included as part of DLL name. wxWidgets DLLs contain compiler
name, version information and vendor name in them. For example
- wxmsw250_core_bcc_custom.dll is one of DLLs build using Borland C++ with
+ wxmsw280_core_bcc_custom.dll is one of DLLs build using Borland C++ with
default settings. If you set VENDOR=mycorp, the name will change to
- wxmsw250_core_bcc_mycorp.dll.
+ wxmsw280_core_bcc_mycorp.dll.
CFG=<configuration name>
Sets configuration name so that you can have multiple wxWidgets builds with
projects / wxWidgets.git / blobdiff