+ echo $ac_n "checking for --enable-spinctrl""... $ac_c" 1>&6
+echo "configure:6635: checking for --enable-spinctrl" >&5
+ no_cache=0
+ # Check whether --enable-spinctrl or --disable-spinctrl was given.
+if test "${enable_spinctrl+set}" = set; then
+ enableval="$enable_spinctrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL=yes'
+ else
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPINCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_spinctrl='wxUSE_SPINCTRL='$DEFAULT_wxUSE_SPINCTRL
+
+fi
+
+
+ eval "$ac_cv_use_spinctrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_spinctrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPINCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-splitter""... $ac_c" 1>&6
+echo "configure:6674: checking for --enable-splitter" >&5
+ no_cache=0
+ # Check whether --enable-splitter or --disable-splitter was given.
+if test "${enable_splitter+set}" = set; then
+ enableval="$enable_splitter"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splitter='wxUSE_SPLITTER=yes'
+ else
+ ac_cv_use_splitter='wxUSE_SPLITTER=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLITTER" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splitter='wxUSE_SPLITTER='$DEFAULT_wxUSE_SPLITTER
+
+fi
+
+
+ eval "$ac_cv_use_splitter"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splitter >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLITTER" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-statbmp""... $ac_c" 1>&6
+echo "configure:6713: checking for --enable-statbmp" >&5
+ no_cache=0
+ # Check whether --enable-statbmp or --disable-statbmp was given.
+if test "${enable_statbmp+set}" = set; then
+ enableval="$enable_statbmp"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbmp='wxUSE_STATBMP=yes'
+ else
+ ac_cv_use_statbmp='wxUSE_STATBMP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBMP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbmp='wxUSE_STATBMP='$DEFAULT_wxUSE_STATBMP
+
+fi
+
+
+ eval "$ac_cv_use_statbmp"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbmp >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBMP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-statbox""... $ac_c" 1>&6
+echo "configure:6752: checking for --enable-statbox" >&5
+ no_cache=0
+ # Check whether --enable-statbox or --disable-statbox was given.
+if test "${enable_statbox+set}" = set; then
+ enableval="$enable_statbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbox='wxUSE_STATBOX=yes'
+ else
+ ac_cv_use_statbox='wxUSE_STATBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbox='wxUSE_STATBOX='$DEFAULT_wxUSE_STATBOX
+
+fi
+
+
+ eval "$ac_cv_use_statbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-statline""... $ac_c" 1>&6
+echo "configure:6791: checking for --enable-statline" >&5
+ no_cache=0
+ # Check whether --enable-statline or --disable-statline was given.
+if test "${enable_statline+set}" = set; then
+ enableval="$enable_statline"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statline='wxUSE_STATLINE=yes'
+ else
+ ac_cv_use_statline='wxUSE_STATLINE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATLINE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statline='wxUSE_STATLINE='$DEFAULT_wxUSE_STATLINE
+
+fi
+
+
+ eval "$ac_cv_use_statline"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statline >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATLINE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-stattext""... $ac_c" 1>&6
+echo "configure:6830: checking for --enable-stattext" >&5
+ no_cache=0
+ # Check whether --enable-stattext or --disable-stattext was given.
+if test "${enable_stattext+set}" = set; then
+ enableval="$enable_stattext"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_stattext='wxUSE_STATTEXT=yes'
+ else
+ ac_cv_use_stattext='wxUSE_STATTEXT=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATTEXT" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_stattext='wxUSE_STATTEXT='$DEFAULT_wxUSE_STATTEXT
+
+fi
+
+
+ eval "$ac_cv_use_stattext"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_stattext >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATTEXT" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-statusbar""... $ac_c" 1>&6
+echo "configure:6869: checking for --enable-statusbar" >&5
+ no_cache=0
+ # Check whether --enable-statusbar or --disable-statusbar was given.
+if test "${enable_statusbar+set}" = set; then
+ enableval="$enable_statusbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=yes'
+ else
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATUSBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statusbar='wxUSE_STATUSBAR='$DEFAULT_wxUSE_STATUSBAR
+
+fi
+
+
+ eval "$ac_cv_use_statusbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statusbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATUSBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tabdialog""... $ac_c" 1>&6
+echo "configure:6908: checking for --enable-tabdialog" >&5
+ no_cache=0
+ # Check whether --enable-tabdialog or --disable-tabdialog was given.
+if test "${enable_tabdialog+set}" = set; then
+ enableval="$enable_tabdialog"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=yes'
+ else
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TABDIALOG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG='$DEFAULT_wxUSE_TABDIALOG
+
+fi
+
+
+ eval "$ac_cv_use_tabdialog"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tabdialog >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TABDIALOG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-textctrl""... $ac_c" 1>&6
+echo "configure:6947: checking for --enable-textctrl" >&5
+ no_cache=0
+ # Check whether --enable-textctrl or --disable-textctrl was given.
+if test "${enable_textctrl+set}" = set; then
+ enableval="$enable_textctrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL=yes'
+ else
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TEXTCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL='$DEFAULT_wxUSE_TEXTCTRL
+
+fi
+
+
+ eval "$ac_cv_use_textctrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_textctrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TEXTCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-togglebtn""... $ac_c" 1>&6
+echo "configure:6986: checking for --enable-togglebtn" >&5
+ no_cache=0
+ # Check whether --enable-togglebtn or --disable-togglebtn was given.
+if test "${enable_togglebtn+set}" = set; then
+ enableval="$enable_togglebtn"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=yes'
+ else
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOGGLEBTN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN='$DEFAULT_wxUSE_TOGGLEBTN
+
+fi
+
+
+ eval "$ac_cv_use_togglebtn"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_togglebtn >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOGGLEBTN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-toolbar""... $ac_c" 1>&6
+echo "configure:7025: checking for --enable-toolbar" >&5
+ no_cache=0
+ # Check whether --enable-toolbar or --disable-toolbar was given.
+if test "${enable_toolbar+set}" = set; then
+ enableval="$enable_toolbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=yes'
+ else
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_toolbar='wxUSE_TOOLBAR='$DEFAULT_wxUSE_TOOLBAR
+
+fi
+
+
+ eval "$ac_cv_use_toolbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_toolbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tbarnative""... $ac_c" 1>&6
+echo "configure:7064: checking for --enable-tbarnative" >&5
+ no_cache=0
+ # Check whether --enable-tbarnative or --disable-tbarnative was given.
+if test "${enable_tbarnative+set}" = set; then
+ enableval="$enable_tbarnative"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=yes'
+ else
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR_NATIVE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE='$DEFAULT_wxUSE_TOOLBAR_NATIVE
+
+fi
+
+
+ eval "$ac_cv_use_tbarnative"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tbarnative >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLBAR_NATIVE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tbarsmpl""... $ac_c" 1>&6
+echo "configure:7103: checking for --enable-tbarsmpl" >&5
+ no_cache=0
+ # Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
+if test "${enable_tbarsmpl+set}" = set; then
+ enableval="$enable_tbarsmpl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=yes'
+ else
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR_SIMPLE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE='$DEFAULT_wxUSE_TOOLBAR_SIMPLE
+
+fi
+
+
+ eval "$ac_cv_use_tbarsmpl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tbarsmpl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLBAR_SIMPLE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-treectrl""... $ac_c" 1>&6
+echo "configure:7142: checking for --enable-treectrl" >&5
+ no_cache=0
+ # Check whether --enable-treectrl or --disable-treectrl was given.
+if test "${enable_treectrl+set}" = set; then
+ enableval="$enable_treectrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_treectrl='wxUSE_TREECTRL=yes'
+ else
+ ac_cv_use_treectrl='wxUSE_TREECTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TREECTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_treectrl='wxUSE_TREECTRL='$DEFAULT_wxUSE_TREECTRL
+
+fi
+
+
+ eval "$ac_cv_use_treectrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_treectrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TREECTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tipwindow""... $ac_c" 1>&6
+echo "configure:7181: checking for --enable-tipwindow" >&5
+ no_cache=0
+ # Check whether --enable-tipwindow or --disable-tipwindow was given.
+if test "${enable_tipwindow+set}" = set; then
+ enableval="$enable_tipwindow"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tipwindow='wxUSE_TIPWINDOW=yes'
+ else
+ ac_cv_use_tipwindow='wxUSE_TIPWINDOW=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TIPWINDOW" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tipwindow='wxUSE_TIPWINDOW='$DEFAULT_wxUSE_TIPWINDOW
+
+fi
+
+
+ eval "$ac_cv_use_tipwindow"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tipwindow >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TIPWINDOW" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-popupwin""... $ac_c" 1>&6
+echo "configure:7220: checking for --enable-popupwin" >&5
+ no_cache=0
+ # Check whether --enable-popupwin or --disable-popupwin was given.
+if test "${enable_popupwin+set}" = set; then
+ enableval="$enable_popupwin"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_popupwin='wxUSE_POPUPWIN=yes'
+ else
+ ac_cv_use_popupwin='wxUSE_POPUPWIN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_POPUPWIN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_popupwin='wxUSE_POPUPWIN='$DEFAULT_wxUSE_POPUPWIN
+
+fi
+
+
+ eval "$ac_cv_use_popupwin"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_popupwin >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_POPUPWIN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-commondlg""... $ac_c" 1>&6
+echo "configure:7261: checking for --enable-commondlg" >&5
+ no_cache=0
+ # Check whether --enable-commondlg or --disable-commondlg was given.
+if test "${enable_commondlg+set}" = set; then
+ enableval="$enable_commondlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=yes'
+ else
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COMMONDLGS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS='$DEFAULT_wxUSE_COMMONDLGS
+
+fi
+
+
+ eval "$ac_cv_use_commondlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_commondlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COMMONDLGS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-choicedlg""... $ac_c" 1>&6
+echo "configure:7300: checking for --enable-choicedlg" >&5
+ no_cache=0
+ # Check whether --enable-choicedlg or --disable-choicedlg was given.
+if test "${enable_choicedlg+set}" = set; then
+ enableval="$enable_choicedlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG=yes'
+ else
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHOICEDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG='$DEFAULT_wxUSE_CHOICEDLG
+
+fi
+
+
+ eval "$ac_cv_use_choicedlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_choicedlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHOICEDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-coldlg""... $ac_c" 1>&6
+echo "configure:7339: checking for --enable-coldlg" >&5
+ no_cache=0
+ # Check whether --enable-coldlg or --disable-coldlg was given.
+if test "${enable_coldlg+set}" = set; then
+ enableval="$enable_coldlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_coldlg='wxUSE_COLOURDLG=yes'
+ else
+ ac_cv_use_coldlg='wxUSE_COLOURDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COLOURDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_coldlg='wxUSE_COLOURDLG='$DEFAULT_wxUSE_COLOURDLG
+
+fi
+
+
+ eval "$ac_cv_use_coldlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_coldlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COLOURDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-filedlg""... $ac_c" 1>&6
+echo "configure:7378: checking for --enable-filedlg" >&5
+ no_cache=0
+ # Check whether --enable-filedlg or --disable-filedlg was given.
+if test "${enable_filedlg+set}" = set; then
+ enableval="$enable_filedlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_filedlg='wxUSE_FILEDLG=yes'
+ else
+ ac_cv_use_filedlg='wxUSE_FILEDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FILEDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_filedlg='wxUSE_FILEDLG='$DEFAULT_wxUSE_FILEDLG
+
+fi
+
+
+ eval "$ac_cv_use_filedlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_filedlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FILEDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-finddlg""... $ac_c" 1>&6
+echo "configure:7417: checking for --enable-finddlg" >&5
+ no_cache=0
+ # Check whether --enable-finddlg or --disable-finddlg was given.
+if test "${enable_finddlg+set}" = set; then
+ enableval="$enable_finddlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_finddlg='wxUSE_FINDREPLDLG=yes'
+ else
+ ac_cv_use_finddlg='wxUSE_FINDREPLDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FINDREPLDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_finddlg='wxUSE_FINDREPLDLG='$DEFAULT_wxUSE_FINDREPLDLG
+
+fi
+
+
+ eval "$ac_cv_use_finddlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_finddlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FINDREPLDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-fontdlg""... $ac_c" 1>&6
+echo "configure:7456: checking for --enable-fontdlg" >&5
+ no_cache=0
+ # Check whether --enable-fontdlg or --disable-fontdlg was given.
+if test "${enable_fontdlg+set}" = set; then
+ enableval="$enable_fontdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fontdlg='wxUSE_FONTDLG=yes'
+ else
+ ac_cv_use_fontdlg='wxUSE_FONTDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FONTDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fontdlg='wxUSE_FONTDLG='$DEFAULT_wxUSE_FONTDLG
+
+fi
+
+
+ eval "$ac_cv_use_fontdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fontdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FONTDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-dirdlg""... $ac_c" 1>&6
+echo "configure:7495: checking for --enable-dirdlg" >&5
+ no_cache=0
+ # Check whether --enable-dirdlg or --disable-dirdlg was given.
+if test "${enable_dirdlg+set}" = set; then
+ enableval="$enable_dirdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=yes'
+ else
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DIRDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dirdlg='wxUSE_DIRDLG='$DEFAULT_wxUSE_DIRDLG
+
+fi
+
+
+ eval "$ac_cv_use_dirdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dirdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DIRDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-msgdlg""... $ac_c" 1>&6
+echo "configure:7534: checking for --enable-msgdlg" >&5
+ no_cache=0
+ # Check whether --enable-msgdlg or --disable-msgdlg was given.
+if test "${enable_msgdlg+set}" = set; then
+ enableval="$enable_msgdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_msgdlg='wxUSE_MSGDLG=yes'
+ else
+ ac_cv_use_msgdlg='wxUSE_MSGDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MSGDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_msgdlg='wxUSE_MSGDLG='$DEFAULT_wxUSE_MSGDLG
+
+fi
+
+
+ eval "$ac_cv_use_msgdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_msgdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MSGDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-numberdlg""... $ac_c" 1>&6
+echo "configure:7573: checking for --enable-numberdlg" >&5
+ no_cache=0
+ # Check whether --enable-numberdlg or --disable-numberdlg was given.
+if test "${enable_numberdlg+set}" = set; then
+ enableval="$enable_numberdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG=yes'
+ else
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NUMBERDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG='$DEFAULT_wxUSE_NUMBERDLG
+
+fi
+
+
+ eval "$ac_cv_use_numberdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_numberdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NUMBERDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-splash""... $ac_c" 1>&6
+echo "configure:7612: checking for --enable-splash" >&5
+ no_cache=0
+ # Check whether --enable-splash or --disable-splash was given.
+if test "${enable_splash+set}" = set; then
+ enableval="$enable_splash"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splash='wxUSE_SPLASH=yes'
+ else
+ ac_cv_use_splash='wxUSE_SPLASH=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLASH" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splash='wxUSE_SPLASH='$DEFAULT_wxUSE_SPLASH
+
+fi
+
+
+ eval "$ac_cv_use_splash"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splash >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLASH" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-textdlg""... $ac_c" 1>&6
+echo "configure:7651: checking for --enable-textdlg" >&5
+ no_cache=0
+ # Check whether --enable-textdlg or --disable-textdlg was given.
+if test "${enable_textdlg+set}" = set; then
+ enableval="$enable_textdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_textdlg='wxUSE_TEXTDLG=yes'
+ else
+ ac_cv_use_textdlg='wxUSE_TEXTDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TEXTDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_textdlg='wxUSE_TEXTDLG='$DEFAULT_wxUSE_TEXTDLG
+
+fi
+
+
+ eval "$ac_cv_use_textdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_textdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TEXTDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tipdlg""... $ac_c" 1>&6
+echo "configure:7690: checking for --enable-tipdlg" >&5
+ no_cache=0
+ # Check whether --enable-tipdlg or --disable-tipdlg was given.
+if test "${enable_tipdlg+set}" = set; then
+ enableval="$enable_tipdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=yes'
+ else
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STARTUP_TIPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS='$DEFAULT_wxUSE_STARTUP_TIPS
+
+fi
+
+
+ eval "$ac_cv_use_tipdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tipdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STARTUP_TIPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-progressdlg""... $ac_c" 1>&6
+echo "configure:7729: checking for --enable-progressdlg" >&5
+ no_cache=0
+ # Check whether --enable-progressdlg or --disable-progressdlg was given.
+if test "${enable_progressdlg+set}" = set; then
+ enableval="$enable_progressdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=yes'
+ else
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PROGRESSDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG='$DEFAULT_wxUSE_PROGRESSDLG
+
+fi
+
+
+ eval "$ac_cv_use_progressdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_progressdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PROGRESSDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-wizarddlg""... $ac_c" 1>&6
+echo "configure:7768: checking for --enable-wizarddlg" >&5
+ no_cache=0
+ # Check whether --enable-wizarddlg or --disable-wizarddlg was given.
+if test "${enable_wizarddlg+set}" = set; then
+ enableval="$enable_wizarddlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wizarddlg='wxUSE_WIZARDDLG=yes'
+ else
+ ac_cv_use_wizarddlg='wxUSE_WIZARDDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WIZARDDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wizarddlg='wxUSE_WIZARDDLG='$DEFAULT_wxUSE_WIZARDDLG
+
+fi
+
+
+ eval "$ac_cv_use_wizarddlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wizarddlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WIZARDDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-menus""... $ac_c" 1>&6
+echo "configure:7809: checking for --enable-menus" >&5
+ no_cache=0
+ # Check whether --enable-menus or --disable-menus was given.
+if test "${enable_menus+set}" = set; then
+ enableval="$enable_menus"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_menus='wxUSE_MENUS=yes'
+ else
+ ac_cv_use_menus='wxUSE_MENUS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MENUS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_menus='wxUSE_MENUS='$DEFAULT_wxUSE_MENUS
+
+fi
+
+
+ eval "$ac_cv_use_menus"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_menus >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MENUS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-miniframe""... $ac_c" 1>&6
+echo "configure:7848: checking for --enable-miniframe" >&5
+ no_cache=0
+ # Check whether --enable-miniframe or --disable-miniframe was given.
+if test "${enable_miniframe+set}" = set; then
+ enableval="$enable_miniframe"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_miniframe='wxUSE_MINIFRAME=yes'
+ else
+ ac_cv_use_miniframe='wxUSE_MINIFRAME=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MINIFRAME" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_miniframe='wxUSE_MINIFRAME='$DEFAULT_wxUSE_MINIFRAME
+
+fi
+
+
+ eval "$ac_cv_use_miniframe"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_miniframe >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MINIFRAME" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tooltips""... $ac_c" 1>&6
+echo "configure:7887: checking for --enable-tooltips" >&5
+ no_cache=0
+ # Check whether --enable-tooltips or --disable-tooltips was given.
+if test "${enable_tooltips+set}" = set; then
+ enableval="$enable_tooltips"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS=yes'
+ else
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLTIPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS='$DEFAULT_wxUSE_TOOLTIPS
+
+fi
+
+
+ eval "$ac_cv_use_tooltips"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tooltips >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLTIPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-splines""... $ac_c" 1>&6
+echo "configure:7926: checking for --enable-splines" >&5
+ no_cache=0
+ # Check whether --enable-splines or --disable-splines was given.
+if test "${enable_splines+set}" = set; then
+ enableval="$enable_splines"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splines='wxUSE_SPLINES=yes'
+ else
+ ac_cv_use_splines='wxUSE_SPLINES=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLINES" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splines='wxUSE_SPLINES='$DEFAULT_wxUSE_SPLINES
+
+fi
+
+
+ eval "$ac_cv_use_splines"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splines >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLINES" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6
+echo "configure:7965: checking for --enable-validators" >&5
+ no_cache=0
+ # Check whether --enable-validators or --disable-validators was given.
+if test "${enable_validators+set}" = set; then
+ enableval="$enable_validators"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_validators='wxUSE_VALIDATORS=yes'
+ else
+ ac_cv_use_validators='wxUSE_VALIDATORS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_VALIDATORS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_validators='wxUSE_VALIDATORS='$DEFAULT_wxUSE_VALIDATORS
+
+fi
+
+
+ eval "$ac_cv_use_validators"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_validators >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_VALIDATORS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6
+echo "configure:8004: checking for --enable-busyinfo" >&5
+ no_cache=0
+ # Check whether --enable-busyinfo or --disable-busyinfo was given.
+if test "${enable_busyinfo+set}" = set; then
+ enableval="$enable_busyinfo"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=yes'
+ else
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BUSYINFO" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO='$DEFAULT_wxUSE_BUSYINFO
+
+fi
+
+
+ eval "$ac_cv_use_busyinfo"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_busyinfo >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BUSYINFO" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6
+echo "configure:8043: checking for --enable-joystick" >&5
+ no_cache=0
+ # Check whether --enable-joystick or --disable-joystick was given.
+if test "${enable_joystick+set}" = set; then
+ enableval="$enable_joystick"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
+ else
+ ac_cv_use_joystick='wxUSE_JOYSTICK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
+
+fi
+
+
+ eval "$ac_cv_use_joystick"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_JOYSTICK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
+echo "configure:8082: checking for --enable-metafile" >&5
+ no_cache=0
+ # Check whether --enable-metafile or --disable-metafile was given.
+if test "${enable_metafile+set}" = set; then
+ enableval="$enable_metafile"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_metafile='wxUSE_METAFILE=yes'
+ else
+ ac_cv_use_metafile='wxUSE_METAFILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_METAFILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_metafile='wxUSE_METAFILE='$DEFAULT_wxUSE_METAFILE
+
+fi
+
+
+ eval "$ac_cv_use_metafile"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_metafile >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_METAFILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-dragimage""... $ac_c" 1>&6
+echo "configure:8121: checking for --enable-dragimage" >&5
+ no_cache=0
+ # Check whether --enable-dragimage or --disable-dragimage was given.
+if test "${enable_dragimage+set}" = set; then
+ enableval="$enable_dragimage"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE=yes'
+ else
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DRAGIMAGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE='$DEFAULT_wxUSE_DRAGIMAGE
+
+fi
+
+
+ eval "$ac_cv_use_dragimage"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dragimage >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DRAGIMAGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-palette""... $ac_c" 1>&6
+echo "configure:8162: checking for --enable-palette" >&5
+ no_cache=0
+ # Check whether --enable-palette or --disable-palette was given.
+if test "${enable_palette+set}" = set; then
+ enableval="$enable_palette"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_palette='wxUSE_PALETTE=yes'
+ else
+ ac_cv_use_palette='wxUSE_PALETTE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PALETTE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_palette='wxUSE_PALETTE='$DEFAULT_wxUSE_PALETTE
+
+fi
+
+
+ eval "$ac_cv_use_palette"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_palette >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PALETTE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-image""... $ac_c" 1>&6
+echo "configure:8201: checking for --enable-image" >&5
+ no_cache=0
+ # Check whether --enable-image or --disable-image was given.
+if test "${enable_image+set}" = set; then
+ enableval="$enable_image"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_image='wxUSE_IMAGE=yes'
+ else
+ ac_cv_use_image='wxUSE_IMAGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IMAGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_image='wxUSE_IMAGE='$DEFAULT_wxUSE_IMAGE
+
+fi
+
+
+ eval "$ac_cv_use_image"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_image >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IMAGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6
+echo "configure:8240: checking for --enable-gif" >&5
+ no_cache=0
+ # Check whether --enable-gif or --disable-gif was given.
+if test "${enable_gif+set}" = set; then
+ enableval="$enable_gif"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gif='wxUSE_GIF=yes'
+ else
+ ac_cv_use_gif='wxUSE_GIF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GIF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gif='wxUSE_GIF='$DEFAULT_wxUSE_GIF
+
+fi
+
+
+ eval "$ac_cv_use_gif"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gif >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GIF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6
+echo "configure:8279: checking for --enable-pcx" >&5
+ no_cache=0
+ # Check whether --enable-pcx or --disable-pcx was given.
+if test "${enable_pcx+set}" = set; then
+ enableval="$enable_pcx"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pcx='wxUSE_PCX=yes'
+ else
+ ac_cv_use_pcx='wxUSE_PCX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PCX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pcx='wxUSE_PCX='$DEFAULT_wxUSE_PCX
+
+fi
+
+
+ eval "$ac_cv_use_pcx"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pcx >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PCX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-iff""... $ac_c" 1>&6
+echo "configure:8318: checking for --enable-iff" >&5
+ no_cache=0
+ # Check whether --enable-iff or --disable-iff was given.
+if test "${enable_iff+set}" = set; then
+ enableval="$enable_iff"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_iff='wxUSE_IFF=yes'
+ else
+ ac_cv_use_iff='wxUSE_IFF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IFF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_iff='wxUSE_IFF='$DEFAULT_wxUSE_IFF
+
+fi
+
+
+ eval "$ac_cv_use_iff"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_iff >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IFF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
+echo "configure:8357: checking for --enable-pnm" >&5
+ no_cache=0
+ # Check whether --enable-pnm or --disable-pnm was given.
+if test "${enable_pnm+set}" = set; then
+ enableval="$enable_pnm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pnm='wxUSE_PNM=yes'
+ else
+ ac_cv_use_pnm='wxUSE_PNM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PNM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pnm='wxUSE_PNM='$DEFAULT_wxUSE_PNM
+
+fi
+
+
+ eval "$ac_cv_use_pnm"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PNM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-xpm""... $ac_c" 1>&6
+echo "configure:8396: checking for --enable-xpm" >&5
+ no_cache=0
+ # Check whether --enable-xpm or --disable-xpm was given.
+if test "${enable_xpm+set}" = set; then
+ enableval="$enable_xpm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_xpm='wxUSE_XPM=yes'
+ else
+ ac_cv_use_xpm='wxUSE_XPM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_XPM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_xpm='wxUSE_XPM='$DEFAULT_wxUSE_XPM
+
+fi
+
+
+ eval "$ac_cv_use_xpm"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_xpm >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_XPM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-ico_cur""... $ac_c" 1>&6
+echo "configure:8435: checking for --enable-ico_cur" >&5
+ no_cache=0
+ # Check whether --enable-ico_cur or --disable-ico_cur was given.
+if test "${enable_ico_cur+set}" = set; then
+ enableval="$enable_ico_cur"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_ico_cur='wxUSE_ICO_CUR=yes'
+ else
+ ac_cv_use_ico_cur='wxUSE_ICO_CUR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ICO_CUR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_ico_cur='wxUSE_ICO_CUR='$DEFAULT_wxUSE_ICO_CUR
+
+fi
+
+
+ eval "$ac_cv_use_ico_cur"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_ico_cur >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ICO_CUR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+fi
+
+case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ LEX_STEM="lexyy"
+ ;;
+ *)
+ PATH_IFS=':'
+ LEX_STEM="lex.yy"
+ ;;
+esac
+
+
+
+ echo "saving argument cache $wx_arg_cache_file"
+ mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file}
+
+
+
+echo $ac_n "checking for toolkit""... $ac_c" 1>&6
+echo "configure:8493: checking for toolkit" >&5
+
+if test "$wxUSE_GUI" = "yes"; then
+
+ if test "$USE_BEOS" = 1; then
+ { echo "configure: error: BeOS GUI is not supported yet, use --disable-gui" 1>&2; exit 1; }
+ fi
+
+ if test "$TOOLKIT_GIVEN" = 1; then
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ eval "$var=`echo \$value | sed -e "s/yes/1/" -e "s/no/0/"`"
+ done
+ else
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ if test "$has_toolkit_in_cache" != 1; then
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ else
+ var=DEFAULT_wxUSE_$toolkit
+ fi
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+ fi
+
+ NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} \
+ + ${wxUSE_WINE:-0} + ${wxUSE_MSW:-0} + ${wxUSE_MGL:-0} + ${wxUSE_MICROWIN:-0} + ${wxUSE_X11:-0}`
+
+ case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
+ esac
+
+ case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ { echo "configure: error: Please specify a toolkit - cannot determine the default for ${host}" 1>&2; exit 1; }
+ ;;
+ *)
+ { echo "configure: error: Please specify at most one toolkit (may be some are cached?)" 1>&2; exit 1; }
+ esac
+
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" != x; then
+ cache_var=CACHE_$toolkit
+ eval "cache=\$${cache_var}"
+ if test "$cache" = 1; then
+ echo "$var=$value" >> ${wx_arg_cache_file}
+ fi
+ if test "$value" = 1; then
+ toolkit_echo=`echo $toolkit | tr [A-Z] [a-z]`
+ echo "$ac_t""$toolkit_echo" 1>&6
+ fi
+ fi
+ done
+else
+ echo "$ac_t""base ($host_alias hosted) only" 1>&6
+fi
+
+
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+if test "$build" != "$host" ; then
+ if test "$USE_WIN32" = 1 -o "$USE_DOS" = 1 -o "$USE_UNIX"; then
+ CC=$host_alias-gcc
+ CXX=$host_alias-c++
+ AR=$host_alias-ar
+ RANLIB=$host_alias-ranlib
+ DLLTOOL=$host_alias-dlltool
+ RESCOMP=$host_alias-windres
+ LD=$host_alias-ld
+ NM=$host_alias-nm
+ STRIP=$host_alias-strip
+ else
+ { echo "configure: error: $build_alias -> $host_alias cross compilation not supported yet." 1>&2; exit 1; }
+ fi
+fi
+
+CFLAGS=${CFLAGS:=}
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8624: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8654: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8705: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:8737: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 8748 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:8753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:8779: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:8784: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8793: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:8812: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:8845: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 8860 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:8866: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 8877 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:8883: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 8894 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:8900: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
+echo "configure:8926: checking whether ${CC-cc} needs -traditional" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_pattern="Autoconf.*'x'"
+ cat > conftest.$ac_ext <<EOF
+#line 8932 "configure"
+#include "confdefs.h"
+#include <sgtty.h>
+Autoconf TIOCGETP
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=yes
+else
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+ if test $ac_cv_prog_gcc_traditional = no; then
+ cat > conftest.$ac_ext <<EOF
+#line 8950 "configure"
+#include "confdefs.h"
+#include <termio.h>
+Autoconf TCGETA
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+ fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
+ if test $ac_cv_prog_gcc_traditional = yes; then
+ CC="$CC -traditional"
+ fi
+fi
+
+
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+CXXFLAGS=${CXXFLAGS:=}
+for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8987: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CXX" && break
+done
+test -n "$CXX" || CXX="gcc"
+
+
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:9019: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 9030 "configure"
+#include "confdefs.h"
+
+int main(){return(0);}
+EOF
+if { (eval echo configure:9035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cxx_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cxx_cross=no
+ else
+ ac_cv_prog_cxx_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cxx_works=no
+fi
+rm -fr conftest*
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
+if test $ac_cv_prog_cxx_works = no; then
+ { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:9061: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
+echo "configure:9066: checking whether we are using GNU C++" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.C <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gxx=yes
+else
+ ac_cv_prog_gxx=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gxx" 1>&6
+
+if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+
+ac_test_CXXFLAGS="${CXXFLAGS+set}"
+ac_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS=
+echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
+echo "configure:9094: checking whether ${CXX-g++} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.cc
+if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
+ ac_cv_prog_cxx_g=yes
+else
+ ac_cv_prog_cxx_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS="$ac_save_CXXFLAGS"
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:9137: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:9168: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:9208: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
projects / wxWidgets.git / blobdiff