+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% Name: socket.tex
+%% Purpose: wxSocket docs
+%% Author: Guillermo Rodriguez Garcia <guille@iies.es>
+%% Modified by:
+%% Created: 1999
+%% RCS-ID: $Id$
+%% Copyright: (c) wxWindows team
+%% Licence: wxWindows licence
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\section{\class{wxSocketBase}}\label{wxsocketbase}
\wxheading{Derived from}
\helpref{wxEvtHandler}{wxevthandler}
-% ---------------------------------------------------------------------------
-% Event handling
-% ---------------------------------------------------------------------------
+\wxheading{Include files}
+
+<wx/socket.h>
+
+\wxheading{wxSocket errors}
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSOCKET\_NOERROR}}{No error happened.}
+\twocolitem{{\bf wxSOCKET\_INVOP}}{Invalid operation.}
+\twocolitem{{\bf wxSOCKET\_IOERR}}{Input/Output error.}
+\twocolitem{{\bf wxSOCKET\_INVADDR}}{Invalid address passed to wxSocket.}
+\twocolitem{{\bf wxSOCKET\_INVSOCK}}{Invalid socket (uninitialized).}
+\twocolitem{{\bf wxSOCKET\_NOHOST}}{No corresponding host.}
+\twocolitem{{\bf wxSOCKET\_INVPORT}}{Invalid port.}
+\twocolitem{{\bf wxSOCKET\_WOULDBLOCK}}{The socket is non-blocking and the operation would block.}
+\twocolitem{{\bf wxSOCKET\_TIMEDOUT}}{The timeout for this operation expired.}
+\twocolitem{{\bf wxSOCKET\_MEMERR}}{Memory exhausted.}
+\end{twocollist}
+
+\wxheading{wxSocket events}
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSOCKET\_INPUT}}{There is data available for reading.}
+\twocolitem{{\bf wxSOCKET\_OUTPUT}}{The socket is ready to be written to.}
+\twocolitem{{\bf wxSOCKET\_CONNECTION}}{Incoming connection (server), or connection establishment (client).}
+\twocolitem{{\bf wxSOCKET\_LOST}}{The connection has been closed.}
+\end{twocollist}
+
+A brief note on how to use these events:
+
+The {\bf wxSOCKET\_INPUT} event will be issued whenever there is data
+available for reading. This will be the case if the input queue was
+empty and new data arrives, or if the application has read some data
+yet there is still more data available. This means that the application
+does not need to read all available data in response to a
+{\bf wxSOCKET\_INPUT} event, as more events will be produced as
+necessary.
+
+The {\bf wxSOCKET\_OUTPUT} event is issued when a socket is first
+connected with \helpref{Connect}{wxsocketclientconnect} or accepted
+with \helpref{Accept}{wxsocketserveraccept}. After that, new
+events will be generated only after an output operation fails
+with {\bf wxSOCKET\_WOULDBLOCK} and buffer space becomes available
+again. This means that the application should assume that it
+can write data to the socket until an {\bf wxSOCKET\_WOULDBLOCK}
+error occurs; after this, whenever the socket becomes writable
+again the application will be notified with another
+{\bf wxSOCKET\_OUTPUT} event.
+
+The {\bf wxSOCKET\_CONNECTION} event is issued when a delayed connection
+request completes succesfully (client) or when a new connection arrives
+at the incoming queue (server).
+
+The {\bf wxSOCKET\_LOST} event is issued when a close indication is
+received for the socket. This means that the connection broke down or
+that it was closed by the peer. Also, this event will be issued if
+a delayed connection request fails.
+
\wxheading{Event handling}
To process events from a socket, use the following event handler macro to direct
- input to member
-functions that take a \helpref{wxSocketEvent}{wxsocketevent} argument.
+input to member functions that take a \helpref{wxSocketEvent}{wxsocketevent} argument.
-\twocolwidtha{7cm}
+\twocolwidtha{7cm}%
\begin{twocollist}\itemsep=0pt
\twocolitem{{\bf EVT\_SOCKET(id, func)}}{A socket event occured.}
-\end{twocollist}%
-
-% ---------------------------------------------------------------------------
-% See also ...
-% ---------------------------------------------------------------------------
+\end{twocollist}
\wxheading{See also}
-\helpref{wxSocketEvent}{wxsocketevent}
-\helpref{wxSocketClient}{wxsocketclient}
-\helpref{wxSocketServer}{wxsocketserver}
+\helpref{wxSocketEvent}{wxsocketevent},
+\helpref{wxSocketClient}{wxsocketclient},
+\helpref{wxSocketServer}{wxsocketserver},
+\helpref{Sockets sample}{samplesockets}
% ---------------------------------------------------------------------------
% Members
\latexignore{\rtfignore{\wxheading{Members}}}
\membersection{wxSocketBase::wxSocketBase}
+
\func{}{wxSocketBase}{\void}
-Default constructor but don't use it, you must use \helpref{wxSocketClient}{wxsocketclient}
+Default constructor. Don't use it; use \helpref{wxSocketClient}{wxsocketclient}
or \helpref{wxSocketServer}{wxsocketserver}.
\membersection{wxSocketBase::\destruct{wxSocketBase}}
\func{}{\destruct{wxSocketBase}}{\void}
-Destroys the wxSocketBase object.
+Destructor.
% ---------------------------------------------------------------------------
% State functions
% ---------------------------------------------------------------------------
+%
+% SetFlags
+%
+
+\membersection{wxSocketBase::SetFlags}\label{wxsocketbasesetflags}
+
+\func{void}{SetFlags}{\param{wxSocketBase::wxSockFlags}{ flags}}
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSOCKET\_NONE}}{Normal functionality.}
+\twocolitem{{\bf wxSOCKET\_NOWAIT}}{Read/write as much data as possible and return immediately.}
+\twocolitem{{\bf wxSOCKET\_WAITALL}}{Wait for all required data to be read/written unless an error occurs.}
+\twocolitem{{\bf wxSOCKET\_BLOCK}}{Block the GUI (do not yield) while reading/writing data.}
+\end{twocollist}
+
+A brief overview on how to use these flags follows.
+
+If no flag is specified (this is the same as {\bf wxSOCKET\_NONE}),
+IO calls will return after some data has been read or written, even
+when the transfer might not be complete. This is the same as issuing
+exactly one blocking low-level call to recv() or send(). Note that
+{\it blocking} here refers to when the function returns, not to whether
+the GUI blocks during this time.
+
+If {\bf wxSOCKET\_NOWAIT} is specified, IO calls will return immediately.
+Read operations will retrieve only available data. Write operations will
+write as much data as possible, depending on how much space is available
+in the output buffer. This is the same as issuing exactly one nonblocking
+low-level call to recv() or send(). Note that {\it nonblocking} here
+refers to when the function returns, not to whether the GUI blocks during
+this time.
+
+If {\bf wxSOCKET\_WAITALL} is specified, IO calls won't return until ALL
+the data has been read or written (or until an error occurs), blocking if
+necessary, and issuing several low level calls if necessary. This is the
+same as having a loop which makes as many blocking low-level calls to
+recv() or send() as needed so as to transfer all the data. Note that
+{\it blocking} here refers to when the function returns, not to whether
+the GUI blocks during this time.
+
+The {\bf wxSOCKET\_BLOCK} flag controls whether the GUI blocks during
+IO operations. If this flag is specified, the socket will not yield
+during IO calls, so the GUI will remain blocked until the operation
+completes. If it is not used, then the application must take extra
+care to avoid unwanted reentrance.
+
+So:
+
+{\bf wxSOCKET\_NONE} will try to read at least SOME data, no matter how much.
+
+{\bf wxSOCKET\_NOWAIT} will always return immediately, even if it cannot
+read or write ANY data.
+
+{\bf wxSOCKET\_WAITALL} will only return when it has read or written ALL
+the data.
+
+{\bf wxSOCKET\_BLOCK} has nothing to do with the previous flags and
+it controls whether the GUI blocks.
+
+%
+% SetNotify
+%
+\membersection{wxSocketBase::SetNotify}\label{wxsocketbasesetnotify}
+
+\func{void}{SetNotify}{\param{wxSocketEventFlags}{ flags}}
+
+SetNotify specifies which socket events are to be sent to the event handler.
+The {\it flags} parameter is a combination of flags ORed toghether. The
+following flags can be used:
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSOCKET\_INPUT\_FLAG}}{to receive wxSOCKET\_INPUT}
+\twocolitem{{\bf wxSOCKET\_OUTPUT\_FLAG}}{to receive wxSOCKET\_OUTPUT}
+\twocolitem{{\bf wxSOCKET\_CONNECTION\_FLAG}}{to receive wxSOCKET\_CONNECTION}
+\twocolitem{{\bf wxSOCKET\_LOST\_FLAG}}{to receive wxSOCKET\_LOST}
+\end{twocollist}
+
+For example:
+
+\begin{verbatim}
+ sock.SetNotify(wxSOCKET_INPUT_FLAG | wxSOCKET_LOST_FLAG);
+ sock.Notify(TRUE);
+\end{verbatim}
+
+In this example, the user will be notified about incoming socket data and
+whenever the connection is closed.
+
+For more information on socket events see \helpref{wxSocket events}{wxsocketbase}.
+
+%
+% SetTimeout
+%
+\membersection{wxSocketBase::SetTimeout}\label{wxsocketbasesettimeout}
+
+\func{void}{SetTimeout}{\param{int }{seconds}}
+
+This function sets the default socket timeout in seconds. This timeout
+applies to all IO calls, and also to the \helpref{Wait}{wxsocketbasewait}
+family of functions if you don't specify a wait interval. Initially, the
+default is set to 10 minutes.
+
+%
+% Notify
+%
+\membersection{wxSocketBase::Notify}\label{wxsocketbasenotify}
+
+\func{void}{Notify}{\param{bool}{ notify}}
+
+According to the {\it notify} value, this function enables
+or disables socket events. If {\it notify} is TRUE, the events
+configured with \helpref{SetNotify}{wxsocketbasesetnotify} will
+be sent to the application. If {\it notify} is FALSE; no events
+will be sent.
+
+%
+% Ok
+%
+
\membersection{wxSocketBase::Ok}\label{wxsocketbaseok}
\constfunc{bool}{Ok}{\void}
\constfunc{bool}{Error}{\void}
-Returns TRUE if an error occured.
+Returns TRUE if an error occured in the last IO operation.
-\membersection{wxSocketBase::IsConnected}\label{wxsocketbaseconnected}
+Use this function to check for an error condition after one of the
+following calls: Read, Write, ReadMsg, WriteMsg, Peek, Unread, Discard.
+
+\membersection{wxSocketBase::IsConnected}\label{wxsocketbaseisconnected}
\constfunc{bool}{IsConnected}{\void}
Returns TRUE if the socket is connected.
-\membersection{wxSocketBase::IsData}\label{wxsocketbaseerror}
+\membersection{wxSocketBase::IsData}\label{wxsocketbaseisdata}
\constfunc{bool}{IsData}{\void}
-Returns TRUE if some data is arrived on the socket.
+Returns TRUE if there is data available to be read.
\membersection{wxSocketBase::IsDisconnected}\label{wxsocketbasedisconnected}
\constfunc{bool}{IsDisconnected}{\void}
-Returns TRUE if the socket is disconnected.
-
-\membersection{wxSocketBase::IsNoWait}\label{wxsocketbasenowait}
-
-\constfunc{bool}{IsNoWait}{\void}
-
-Returns TRUE if the socket mustn't wait.
+Returns TRUE if the socket is not connected.
\membersection{wxSocketBase::LastCount}\label{wxsocketbaselastcount}
-\constfunc{size\_t}{LastCount}{\void}
+\constfunc{wxUint32}{LastCount}{\void}
Returns the number of bytes read or written by the last IO call.
+Use this function to get the number of bytes actually transferred
+after using one of the following IO calls: Read, Write, ReadMsg,
+WriteMsg, Peek, Unread, Discard.
+
\membersection{wxSocketBase::LastError}\label{wxsocketbaselasterror}
-\constfunc{int}{LastError}{\void}
+\constfunc{wxSocketError}{LastError}{\void}
+
+Returns the last wxSocket error. See \helpref{wxSocket errors}{wxsocketbase}.
-Returns an error in the errno format (see your C programmer's guide).
+Please note that this function merely returns the last error code,
+but it should not be used to determine if an error has occured (this
+is because successful operations do not change the LastError value).
+Use \helpref{Error}{wxsocketbaseerror} first, in order to determine
+if the last IO call failed. If this returns TRUE, use LastError()
+to discover the cause of the error.
% ---------------------------------------------------------------------------
% IO calls
% ---------------------------------------------------------------------------
-
%
% Peek
%
-
\membersection{wxSocketBase::Peek}\label{wxsocketbasepeek}
-\func{wxSocketBase\&}{Peek}{\param{char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{wxSocketBase\&}{Peek}{\param{char *}{ buffer}, \param{wxUint32}{ nbytes}}
+
+This function peeks a buffer of {\it nbytes} bytes from the socket.
+Peeking a buffer doesn't delete it from the socket input queue.
-This function peeks a buffer of {\it nbytes} bytes from the socket. Peeking a buffer
-doesn't delete it from the system socket in-queue.
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually peeked.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
\wxheading{Parameters}
\docparam{buffer}{Buffer where to put peeked data.}
+
\docparam{nbytes}{Number of bytes.}
-\wxheading{Returns value}
+\wxheading{Return value}
+
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+The exact behaviour of wxSocketBase::Peek() depends on the combination
+of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaserror},
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
%
% Read
%
-
\membersection{wxSocketBase::Read}\label{wxsocketbaseread}
-\func{wxSocketBase\&}{Read}{\param{char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{wxSocketBase\&}{Read}{\param{char *}{ buffer}, \param{wxUint32}{ nbytes}}
This function reads a buffer of {\it nbytes} bytes from the socket.
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually read.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
+
\wxheading{Parameters}
\docparam{buffer}{Buffer where to put read data.}
+
\docparam{nbytes}{Number of bytes.}
-\wxheading{Returns value}
+\wxheading{Return value}
+
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+The exact behaviour of wxSocketBase::Read() depends on the combination
+of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaserror},
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
-
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
+
%
-% Read
+% Write
%
-
\membersection{wxSocketBase::Write}\label{wxsocketbasewrite}
-\func{wxSocketBase\&}{Write}{\param{const char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{wxSocketBase\&}{Write}{\param{const char *}{ buffer}, \param{wxUint32}{ nbytes}}
+
+This function writes a buffer of {\it nbytes} bytes to the socket.
-This function writes a buffer of {\it nbytes} bytes from the socket.
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually written.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
\wxheading{Parameters}
-\docparam{buffer}{Buffer where to get the data to write.}
+\docparam{buffer}{Buffer with the data to be sent.}
+
\docparam{nbytes}{Number of bytes.}
-\wxheading{Returns value}
+\wxheading{Return value}
+
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+The exact behaviour of wxSocketBase::Write() depends on the combination
+of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaserror},
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
%
% WriteMsg
%
-
\membersection{wxSocketBase::WriteMsg}\label{wxsocketbasewritemsg}
-\func{wxSocketBase\&}{WriteMsg}{\param{const char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{wxSocketBase\&}{WriteMsg}{\param{const char *}{ buffer}, \param{wxUint32}{ nbytes}}
+
+This function writes a buffer of {\it nbytes} bytes from the socket, but it
+writes a short header before so that \helpref{ReadMsg}{wxsocketbasereadmsg}
+knows how much data should it actually read. So, a buffer sent with WriteMsg
+{\bf must} be read with ReadMsg. This function always waits for the entire
+buffer to be sent, unless an error occurs.
-This function writes a buffer of {\it nbytes} bytes from the socket. But it
-writes a short header before so that ReadMsg can alloc the right size for
-the buffer. So a buffer sent with WriteMsg {\bf must} be read with ReadMsg.
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually written.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
\wxheading{Parameters}
-\docparam{buffer}{Buffer where to put data peeked.}
-\docparam{nbytes}{Number of bytes.}
+\docparam{buffer}{Buffer with the data to be sent.}
+
+\docparam{nbytes}{Number of bytes to send.}
+
+\wxheading{Return value}
-\wxheading{Returns value}
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+wxSocketBase::WriteMsg() will behave as if the {\bf wxSOCKET\_WAITALL} flag
+was always set and it will always ignore the {\bf wxSOCKET\_NOWAIT} flag.
+The exact behaviour of WriteMsg depends on the {\bf wxSOCKET\_BLOCK} flag.
+For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaserror},
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags},
\helpref{wxSocketBase::ReadMsg}{wxsocketbasereadmsg}
%
% ReadMsg
%
-
\membersection{wxSocketBase::ReadMsg}\label{wxsocketbasereadmsg}
-\func{wxSocketBase\&}{ReadMsg}{\param{char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{wxSocketBase\&}{ReadMsg}{\param{char *}{ buffer}, \param{wxUint32}{ nbytes}}
+
+This function reads a buffer sent by \helpref{WriteMsg}{wxsocketbasewritemsg}
+on a socket. If the buffer passed to the function isn't big enough, the
+remaining bytes will be discarded. This function always waits for the
+buffer to be entirely filled, unless an error occurs.
-This function reads a buffer sent by WriteMsg on a socket. If the buffer passed
-to the function isn't big enough, the function filled it and then discard the
-bytes left. This function always wait for the buffer to be entirely filled.
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually read.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
\wxheading{Parameters}
\docparam{buffer}{Buffer where to put read data.}
-\docparam{nbytes}{Number of bytes allocated for the buffer.}
-\wxheading{Returns value}
+\docparam{nbytes}{Size of the buffer.}
+
+\wxheading{Return value}
+
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+wxSocketBase::ReadMsg() will behave as if the {\bf wxSOCKET\_WAITALL} flag
+was always set and it will always ignore the {\bf wxSOCKET\_NOWAIT} flag.
+The exact behaviour of ReadMsg depends on the {\bf wxSOCKET\_BLOCK} flag.
+For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaserror},
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags},
\helpref{wxSocketBase::WriteMsg}{wxsocketbasewritemsg}
%
% Unread
%
+\membersection{wxSocketBase::Unread}\label{wxsocketbaseunread}
+
+\func{wxSocketBase\&}{Unread}{\param{const char *}{ buffer}, \param{wxUint32}{ nbytes}}
-\membersection{wxSocketBase::UnRead}\label{wxsocketbaseunread}
+This function unreads a buffer. That is, the data in the buffer is put back
+in the incoming queue. This function is not affected by wxSocket flags.
-\func{wxSocketBase\&}{UnRead}{\param{const char *}{ buffer}, \param{size\_t}{ nbytes}}
+If you use \helpref{LastCount}{wxsocketbaselastcount}, it will always return {\it nbytes}.
-This function unreads a buffer. It means that the buffer is put in the top
-of the incoming queue. But, it is put also at the end of all unread buffers.
-It is useful for sockets because we can't seek it.
+If you use \helpref{Error}{wxsocketbaseerror}, it will always return FALSE.
\wxheading{Parameters}
\docparam{buffer}{Buffer to be unread.}
+
\docparam{nbytes}{Number of bytes.}
-\wxheading{Returns value}
+\wxheading{Return value}
+
Returns a reference to the current object.
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaserror},
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
%
% Discard
%
-
\membersection{wxSocketBase::Discard}\label{wxsocketbasediscard}
\func{wxSocketBase\&}{Discard}{\void}
This function simply deletes all bytes in the incoming queue. This function
-doesn't wait.
+always returns immediately and its operation is not affected by IO flags.
+
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually discarded.
+
+If you use \helpref{Error}{wxsocketbaseerror}, it will always return FALSE.
% ---------------------------------------------------------------------------
% Wait functions
% ---------------------------------------------------------------------------
\membersection{wxSocketBase::Wait}\label{wxsocketbasewait}
-\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
-This function waits for an event: it could be an incoming byte, the possibility
-for the client to write, a lost connection, an incoming connection, an
-established connection.
+\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
+
+This function waits until one of the following conditions is TRUE. Note
+that it is recommended to use the individual Wait functions to wait for
+the required condition, instead of this one.
+
+\begin{itemize}
+\item There is data available for reading.
+\item The socket becomes writable.
+\item An ongoing connection request has completed (only for clients)
+\item An incoming connection request has arrived (only for servers)
+\item The connection has been closed.
+\end{itemize}
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-\wxheading{Return value:}
+\docparam{millisecond}{Number of milliseconds to wait.}
+
+\wxheading{Return value}
-Returns TRUE if an event occured, FALSE if the timeout was reached.
+Returns TRUE when any of the above conditions is satisfied,
+FALSE if the timeout was reached.
\wxheading{See also}
-\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
+\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
+\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
%
% WaitForRead
%
-
\membersection{wxSocketBase::WaitForRead}\label{wxsocketbasewaitforread}
-\func{bool}{WaitForRead}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
-This function waits for a read event.
+\func{bool}{WaitForRead}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
+
+This function waits until there is data available to be read, or until
+an error occurs.
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-\wxheading{Return value:}
+\docparam{millisecond}{Number of milliseconds to wait.}
+
+\wxheading{Return value}
-Returns TRUE if a byte arrived, FALSE if the timeout was reached.
+Returns TRUE if there is data to be read, FALSE if the timeout was reached
+or an error occured.
\wxheading{See also}
-\helpref{wxSocketBase::Wait}{wxsocketbasewait},
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
+\helpref{wxSocketBase::Wait}{wxsocketbasewait},
+\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
%
% WaitForWrite
%
-
\membersection{wxSocketBase::WaitForWrite}\label{wxsocketbasewaitforwrite}
-\func{bool}{WaitForWrite}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
-This function waits for a write event.
+\func{bool}{WaitForWrite}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
+
+This function waits until the socket is ready to send data,
+or until an error occurs.
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-\wxheading{Return value:}
+\docparam{millisecond}{Number of milliseconds to wait.}
-Returns TRUE if a write event occured, FALSE if the timeout was reached.
+\wxheading{Return value}
+
+Returns TRUE if you can write to the socket, FALSE if the timeout was
+reached or an error occured.
\wxheading{See also}
-\helpref{wxSocketBase::Wait}{wxsocketbasewait},
-\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
+\helpref{wxSocketBase::Wait}{wxsocketbasewait},
+\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
%
% WaitForLost
%
-
\membersection{wxSocketBase::WaitForLost}\label{wxsocketbasewaitforlost}
-\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
-This function waits for a "lost" event. For instance, the peer may have closed
-the connection, or the connection may have been broken.
+\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
+
+This function waits until the connection is lost. This may happen if
+the peer gracefully closes the connection or if the connection breaks.
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
+
+\docparam{millisecond}{Number of milliseconds to wait.}
-\wxheading{Return value:}
+\wxheading{Return value}
-Returns TRUE if a "lost" event occured, FALSE if the timeout was reached.
+Returns TRUE if the connection was lost, FALSE if the timeout was reached.
\wxheading{See also}
-\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
+\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
+\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
% ---------------------------------------------------------------------------
% Socket state
% ---------------------------------------------------------------------------
+%
+% RestoreState
+%
+\membersection{wxSocketBase::RestoreState}\label{wxsocketbaserestorestate}
+
+\func{void}{RestoreState}{\void}
+
+This function restores the previous state of the socket, as saved
+with \helpref{SaveState}{wxsocketbasesavestate}
+
+Calls to SaveState and RestoreState can be nested.
+
+\wxheading{See also}
+
+\helpref{wxSocketBase::SaveState}{wxsocketbasesavestate}
+
%
% SaveState
%
\membersection{wxSocketBase::SaveState}\label{wxsocketbasesavestate}
+
\func{void}{SaveState}{\void}
-This function saves the current state of the socket object in a stack:
-actually it saves all flags and the state of the asynchronous callbacks.
+This function saves the current state of the socket in a stack. Socket
+state includes flags, as set with \helpref{SetFlags}{wxsocketbasesetflags},
+event mask, as set with \helpref{SetNotify}{wxsocketbasesetnotify} and
+\helpref{Notify}{wxsocketbasenotify}, and current settings for the
+asynchronous callbacks, as set with \helpref{Callback}{wxsocketbasecallback}
+and \helpref{CallbackData}{wxsocketbasecallbackdata}.
+
+Calls to SaveState and RestoreState can be nested.
\wxheading{See also}
\helpref{wxSocketBase::RestoreState}{wxsocketbaserestorestate}
%
-% RestoreState
+% GetLocal
%
+\membersection{wxSocketBase::GetLocal}\label{wxsocketbasegetlocal}
-\membersection{wxSocketBase::RestoreState}\label{wxsocketbaserestorestate}
+\constfunc{bool}{GetLocal}{\param{wxSockAddress\& }{addr\_man}}
-\func{void}{RestoreState}{\void}
+This function returns the local address field of the socket. The local
+address field contains the complete local address of the socket (local
+address, local port, ...).
-This function restores a previously saved state.
+\wxheading{Return value}
-\wxheading{See also}
+It returns TRUE if no errors happened, FALSE otherwise.
-\helpref{wxSocketBase::SaveState}{wxsocketbasesavestate}
+%
+% GetPeer
+%
+\membersection{wxSocketBase::GetPeer}\label{wxsocketbasegetpeer}
+
+\constfunc{bool}{GetPeer}{\param{wxSockAddress\& }{addr\_man}}
+
+This function returns the peer address field of the socket. The peer
+address field contains the complete peer host address of the socket
+(address, port, ...).
+
+\wxheading{Return value}
+
+It returns TRUE if no errors happened, FALSE otherwise.
% ---------------------------------------------------------------------------
% Socket callbacks
% ---------------------------------------------------------------------------
+\membersection{wxSocketBase::SetEventHandler}\label{wxsocketbaseseteventhandler}
-\membersection{wxSocketBase::SetEventHandler}{wxsocketbaseseteventhandler}
\func{void}{SetEventHandler}{\param{wxEvtHandler\&}{ evt\_hdlr}, \param{int}{ id = -1}}
-Sets an event handler to be called when a socket event occured.
+Sets an event handler to be called when a socket event occurs. The
+handler will be called for those events for which notification is
+enabled with \helpref{SetNotify}{wxsocketbasesetnotify} and
+\helpref{Notify}{wxsocketbasenotify}.
+
+You can also specify a callback function to be called when an event
+occurs, although if possible, events should be used instead of callbacks.
+See \helpref{Callback}{wxsocketbasecallback} and
+\helpref{CallbackData}{wxsocketbasecallbackdata}.
\wxheading{Parameters}
\docparam{evt\_hdlr}{Specifies the event handler you want to use.}
+
\docparam{id}{The id of socket event.}
\wxheading{See also}
-\helpref{wxSocketEvent}{wxsocketevent}
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
+\helpref{wxSocketEvent}{wxsocketevent},
+\helpref{wxEvtHandler}{wxevthandler},
+\helpref{wxSocketBase::Callback}{wxsocketbasecallback},
+\helpref{wxSocketBase::CallbackData}{wxsocketbasecallbackdata}
+
+\membersection{wxSocketBase::Callback}\label{wxsocketbasecallback}
+
+\func{wxSocketBase::wxSockCbk}{Callback}{\param{wxSocketBase::wxSockCbk}{ callback}}
+
+You can setup a callback function to be called when an event occurs.
+The function will be called only for those events for which notification
+has been enabled with \helpref{Notify}{wxsocketbasenotify} and
+\helpref{SetNotify}{wxsocketbasesetnotify}. The prototype of the
+callback must be as follows:
+
+\begin{verbatim}
+void SocketCallback(wxSocketBase& sock, wxSocketNotify evt, char *cdata);
+\end{verbatim}
+
+The first parameter is a reference to the socket object in which the
+event occured. The second parameter tells you which event occured.
+(See \helpref{wxSocket events}{wxsocketbase}). The third parameter
+is the user data you specified using
+\helpref{CallbackData}{wxsocketbasecallbackdata}.
+
+Note that events are preferred over callbacks where possible.
+
+\wxheading{Return value}
+
+A pointer to the previous callback.
+
+\wxheading{See also}
+
+\helpref{wxSocketBase::CallbackData}{wxsocketbasecallbackdata},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify}
+
+\membersection{wxSocketBase::CallbackData}\label{wxsocketbasecallbackdata}
+
+\func{char *}{CallbackData}{\param{char *}{cdata}}
+
+This function sets the the user data which will be passed to a
+callback function set via \helpref{Callback}{wxsocketbasecallback}.
+
+Note that events are preferred over callbacks where possible.
+
+\wxheading{Return value}
+
+A pointer to the previous user data.
+
+\helpref{wxSocketBase::Callback}{wxsocketbasecallback},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify}
% ---------------------------------------------------------------------------
% CLASS wxSocketClient
% ---------------------------------------------------------------------------
-
\section{\class{wxSocketClient}}\label{wxsocketclient}
\wxheading{Derived from}
\helpref{wxSocketBase}{wxsocketbase}
+\wxheading{Include files}
+
+<wx/socket.h>
+
% ---------------------------------------------------------------------------
% Members
% ---------------------------------------------------------------------------
-
%
% wxSocketClient
%
-
\membersection{wxSocketClient::wxSocketClient}
+
\func{}{wxSocketClient}{\param{wxSockFlags}{ flags = wxSocketBase::NONE}}
-Constructs a new wxSocketClient.
-{\bf Warning !} The created needs to be registered to a socket handler (See \helpref{wxSocketHandler}{wxsockethandler}).
+Constructor.
\wxheading{Parameters}
%
% ~wxSocketClient
%
-
\membersection{wxSocketClient::\destruct{wxSocketClient}}
+
\func{}{\destruct{wxSocketClient}}{\void}
-Destructs a wxSocketClient object.
+Destructor.
%
% Connect
%
+\membersection{wxSocketClient::Connect}\label{wxsocketclientconnect}
-\membersection{wxSocketClient::Connect}{wxsocketclientconnect}
\func{bool}{Connect}{\param{wxSockAddress\&}{ address}, \param{bool}{ wait = TRUE}}
-Connects to a server using the specified address. If {\it wait} is TRUE, Connect
-will wait for the socket ready to send or receive data.
+Connects to a server using the specified address.
+
+If {\it wait} is TRUE, Connect will wait until the connection completes.
+{\bf Warning:} This will block the GUI.
+
+If {\it wait} is FALSE, Connect will try to establish the connection and
+return immediately, without blocking the GUI. When used this way, even if
+Connect returns FALSE, the connection request can be completed later.
+To detect this, use \helpref{WaitOnConnect}{wxsocketclientwaitonconnect},
+or catch {\bf wxSOCKET\_CONNECTION} events (for successful establishment)
+and {\bf wxSOCKET\_LOST} events (for connection failure).
\wxheading{Parameters}
\docparam{address}{Address of the server.}
-\docparam{wait}{If true, waits for the connection to be ready.}
+
+\docparam{wait}{If TRUE, waits for the connection to complete.}
\wxheading{Return value}
Returns TRUE if the connection is established and no error occurs.
+If {\it wait} was TRUE, and Connect returns FALSE, an error occured
+and the connection failed.
+
+If {\it wait} was FALSE, and Connect returns FALSE, you should still
+be prepared to handle the completion of this connection request, either
+with \helpref{WaitOnConnect}{wxsocketclientwaitonconnect} or by watching
+{\bf wxSOCKET\_CONNECTION} and {\bf wxSOCKET\_LOST} events.
+
\wxheading{See also}
-\helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect}
+\helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify}
%
% WaitOnConnect
%
+\membersection{wxSocketClient::WaitOnConnect}\label{wxsocketclientwaitonconnect}
-\membersection{wxSocketClient::WaitOnConnect}
-\func{bool}{WaitOnConnect}{\param{long}{ seconds = -1}, \param{long}{ microseconds = 0}}
+\func{bool}{WaitOnConnect}{\param{long}{ seconds = -1}, \param{long}{ milliseconds = 0}}
-Wait for a "connect" event.
+Wait until a connection request completes, or until the specified timeout
+elapses. Use this function after issuing a call to \helpref{Connect}{wxsocketclientconnect}
+with {\it wait} set to FALSE.
-\wxheading{See also}
+\wxheading{Parameters}
-\helpref{wxSocketBase::Wait}{wxsocketbasewait} for a detailed description.
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-% ---------------------------------------------------------------------------
-% CLASS: wxSocketServer
-% ---------------------------------------------------------------------------
+\docparam{millisecond}{Number of milliseconds to wait.}
-\section{\class{wxSocketServer}}\label{wxsocketserver}
+\wxheading{Return value}
-\wxheading{Derived from}
+If the connection is succesfully established, returns TRUE.
-\helpref{wxSocketBase}{wxsocketbase}
+If the timeout expires, or if the connection fails, returns FALSE.
+To distinguish between these two conditions, use \helpref{IsConnected}{wxsocketbaseisconnected}
+
+\wxheading{See also}
+
+\helpref{wxSocketClient::Connect}{wxsocketclientconnect},
+\helpref{wxSocketBase::IsConnected}{wxsocketbaseisconnected}
% ---------------------------------------------------------------------------
-% Members
+% CLASS: wxSocketEvent
% ---------------------------------------------------------------------------
+\section{\class{wxSocketEvent}}\label{wxsocketevent}
-\latexignore{\rtfignore{\wxheading{Members}}}
-
-%
-% wxSocketServer
-%
+This event class contains information about socket events.
-\membersection{wxSocketServer::wxSocketServer}{wxsocketserverconstr}
-\func{}{wxSocketServer}{\param{wxSockAddress\&}{ address}, \param{wxSockFlags}{ flags = wxSocketBase::NONE}}
+\wxheading{Derived from}
-Constructs a new wxSocketServer.
-{\bf Warning !} The created object needs to be registered to a socket handler
-(See \helpref{wxSocketHandler}{wxsockethandler}).
+\helpref{wxEvent}{wxevent}
-\wxheading{Parameters}
+\wxheading{Include files}
-\docparam{address}{Specifies the local address for the server (e.g. port number).}
-\docparam{flags}{Socket flags (See \helpref{wxSocketBase::SetFlags}{wxsocketbase
-setflags})}
+<wx/socket.h>
-%
-% ~wxSocketServer
-%
+\wxheading{Event table macros}
-\membersection{wxSocketServer::\destruct{wxSocketServer}}
-\func{}{\destruct{wxSocketServer}}{\void}
+To process a socket event, use these event handler macros to direct input to member
+functions that take a wxSocketEvent argument.
-Destructs a wxSocketServer object (it doesn't close the accepted connection).
-
-%
-% Accept
-%
-
-\membersection{wxSocketServer::Accept}
-\func{wxSocketBase *}{Accept}{\void}
-
-Creates a new object wxSocketBase and accepts an incoming connection. {\bf Warning !} This function will block the GUI.
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf EVT\_SOCKET(id, func)}}{Process a socket event, supplying the member function.}
+\end{twocollist}
-\wxheading{Return value}
+\wxheading{See also}
-Returns an opened socket connection.
+\helpref{wxSocketBase}{wxsocketbase},
+\helpref{wxSocketClient}{wxsocketclient},
+\helpref{wxSocketServer}{wxsocketserver}
-\wxheading{See also}
+\latexignore{\rtfignore{\wxheading{Members}}}
-\helpref{wxSocketServer::AcceptWith}{wxsocketserveracceptwith}
+\membersection{wxSocketEvent::wxSocketEvent}
-%
-% AcceptWith
-%
+\func{}{wxSocketEvent}{\param{int}{ id = 0}}
-\membersection{wxSocketServer::AcceptWith}{wxsocketserveracceptwith}
-\func{bool}{AcceptWith}{\param{wxSocketBase\&}{ socket}}
+Constructor.
-Accept an incoming connection using the specified socket object.
-This is useful when someone wants to inherit wxSocketBase.
+\membersection{wxSocketEvent::Socket}\label{wxsocketeventsocket}
-\wxheading{Parameters}
+\constfunc{wxSocketBase *}{Socket}{\void}
-\docparam{socket}{Socket to be initialized}
+Returns the socket object to which this event refers to. This makes
+it possible to use the same event handler for different sockets.
-\wxheading{Return value}
+\membersection{wxSocketEvent::SocketEvent}\label{wxsocketeventsocketevent}
-Returns TRUE if no error occurs, else FALSE.
+\constfunc{wxSocketNotify}{SocketEvent}{\void}
+Returns the socket event type.
% ---------------------------------------------------------------------------
-% CLASS: wxSocketHandler
+% CLASS: wxSocketServer
% ---------------------------------------------------------------------------
-
-\section{\class{wxSocketHandler}}\label{wxsockethandler}
+\section{\class{wxSocketServer}}\label{wxsocketserver}
\wxheading{Derived from}
-\helpref{wxObject}{wxobject}
+\helpref{wxSocketBase}{wxsocketbase}
+
+\wxheading{Include files}
+
+<wx/socket.h>
% ---------------------------------------------------------------------------
% Members
% ---------------------------------------------------------------------------
-
\latexignore{\rtfignore{\wxheading{Members}}}
%
-% wxSocketHandler
-%
-\membersection{wxSocketHandler::wxSocketHandler}
-\func{}{wxSocketHandler}{\void}
-
-Constructs a new wxSocketHandler.
-It is advised to use \helpref{wxSocketHandler::Master}{wxsockethandlermaster}
-to get a socket handler. But creating a socket handler is useful to group
-many sockets.
-
-%
-% ~wxSocketHandler
-%
-
-\membersection{wxSocketHandler::\destruct{wxSocketHandler}}
-\func{}{\destruct{wxSocketHandler}}{\void}
-
-Destructs a wxSocketHandler object.
-
-%
-% Register
+% wxSocketServer
%
+\membersection{wxSocketServer::wxSocketServer}\label{wxsocketserverconstr}
-\membersection{wxSocketHandler::Register}
-\func{void}{Register}{\param{wxSocketBase *}{socket}}
+\func{}{wxSocketServer}{\param{wxSockAddress\&}{ address}, \param{wxSockFlags}{ flags = wxSocketBase::NONE}}
-Register a socket: if it is already registered in this handler it will just
-return immediately.
+Constructs a new server and tries to bind to the specified {\it address}.
+Before trying to accept new connections, test whether it succeeded with
+\helpref{wxSocketBase::Ok}{wxsocketbaseok}.
\wxheading{Parameters}
-\docparam{socket}{Socket to be registered.}
+\docparam{address}{Specifies the local address for the server (e.g. port number).}
+
+\docparam{flags}{Socket flags (See \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags})}
%
-% UnRegister
+% ~wxSocketServer
%
+\membersection{wxSocketServer::\destruct{wxSocketServer}}
-\membersection{wxSocketHandler::UnRegister}
-\func{void}{UnRegister}{\param{wxSocketBase *}{socket}}
-
-UnRegister a socket: if it isn't registered in this handler it will just
-return.
-
-\wxheading{Parameters}
+\func{}{\destruct{wxSocketServer}}{\void}
-\docparam{socket}{Socket to be unregistered.}
+Destructor (it doesn't close the accepted connections).
%
-% Count
+% Accept
%
+\membersection{wxSocketServer::Accept}\label{wxsocketserveraccept}
-\membersection{wxSocketHandler::Count}
-\constfunc{unsigned long}{Count}{\void}
+\func{wxSocketBase *}{Accept}{\param{bool}{ wait = TRUE}}
-Returns the number of sockets registered in the handler.
+Accepts an incoming connection request, and creates a new
+\helpref{wxSocketBase}{wxsocketbase} object which represents
+the server-side of the connection.
-\wxheading{Return value}
+If {\it wait} is TRUE and there are no pending connections to be
+accepted, it will wait for the next incoming connection to arrive.
+{\bf Warning:} This will block the GUI.
-Number of sockets registered.
+If {\it wait} is FALSE, it will try to accept a pending connection
+if there is one, but it will always return immediately without blocking
+the GUI. If you want to use Accept in this way, you can either check for
+incoming connections with \helpref{WaitForAccept}{wxsocketserverwaitforaccept}
+or catch {\bf wxSOCKET\_CONNECTION} events, then call Accept() once you know
+that there is an incoming connection waiting to be accepted.
-%
-% CreateServer
-%
-
-\membersection{wxSocketHandler::CreateServer}
-\func{wxSocketServer *}{CreateServer}{\param{wxSockAddress\&}{ address}, \param{wxSocketBase::wxSockFlags}{ flags = wxSocketbase::NONE}}
+\wxheading{Return value}
-Creates a new wxSocketServer object. The object is automatically registered
-to the current socket handler.
-For a detailed description of the parameters, see \helpref{wxSocketServer::wxSocketServer}{wxsocketserverconstr}.
+Returns an opened socket connection, or NULL if an error occured or
+if the {\it wait} parameter was FALSE and there were no pending
+connections.
-\wxheading{Return value}
+\wxheading{See also}
-Returns a new socket server.
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
+\helpref{wxSocketServer::AcceptWith}{wxsocketserveracceptwith}
%
-% CreateClient
+% AcceptWith
%
+\membersection{wxSocketServer::AcceptWith}\label{wxsocketserveracceptwith}
-\membersection{wxSocketHandler::CreateClient}
-\func{wxSocketServer *}{CreateClient}{\param{wxSocketBase::wxSockFlags}{ flags = wxSocketbase::NONE}}
+\func{bool}{AcceptWith}{\param{wxSocketBase\&}{ socket}, \param{bool}{ wait = TRUE}}
-Creates a new wxSocketClient object. The object is automatically registered
-to the current socket handler.
-For a detailed description of the parameters, see \helpref{wxSocketClient::Connect}{wxsocketclientconnect}.
+Accept an incoming connection using the specified socket object.
-\wxheading{Return value}
+\wxheading{Parameters}
-Returns a new socket client.
+\docparam{socket}{Socket to be initialized}
-%
-% Master
-%
+\wxheading{Return value}
-\membersection{wxSocketHandler::Master}
-\func{static wxSocketHandler\&}{Master}{\void}
+Returns TRUE on success, or FALSE if an error occured or if the
+{\it wait} parameter was FALSE and there were no pending
+connections.
-Returns a default socket handler.
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
+\helpref{wxSocketServer::Accept}{wxsocketserveraccept} for a detailed explanation
%
-% Wait
+% WaitForAccept
%
-\membersection{wxSocketHandler::Wait}
-\func{int}{Wait}{\param{long}{ seconds},\param{long}{ microseconds}}
+\membersection{wxSocketServer::WaitForAccept}\label{wxsocketserverwaitforaccept}
-Wait for an event on all registered sockets.
+\func{bool}{WaitForAccept}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
+
+This function waits for an incoming connection. Use it if you want to call
+\helpref{Accept}{wxsocketserveraccept} or \helpref{AcceptWith}{wxsocketserveracceptwith}
+with {\it wait} set to FALSE, to detect when an incoming connection is waiting
+to be accepted.
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
+
+\docparam{millisecond}{Number of milliseconds to wait.}
\wxheading{Return value}
-Returns 0 if a timeout occured, else the number of events detected.
+Returns TRUE if an incoming connection arrived, FALSE if the timeout elapsed.
\wxheading{See also}
-\helpref{wxSocketBase::Wait}{wxsockebasewait}
-
-%
-% YieldSock
-%
-\membersection{wxSocketHandler::YieldSock}
-\func{void}{YieldSock}{\void}
+\helpref{wxSocketServer::Accept}{wxsocketserveraccept},
+\helpref{wxSocketServer::AcceptWith}{wxsocketserveracceptwith}
-Execute pending requests in all registered sockets.
projects / wxWidgets.git / blobdiff