+#
# makeg95.env
# Common makefile settings for wxWindows programs
-# This file is included by all the other makefiles, thus changes
+# This file is included by all the other makefiles, thus changes
# made here take effect everywhere (except where overriden).
+# The settings are for GnuWin32-derived compilers, i.e. Cygwin and Mingw32.
#
-# An alternative to editing this file is to create a shell script
-# to export specific variables, and call make with the -e switch
-# to override makefile variables. See wx/install/install.txt.
-# And you can override specific variables on the make command line, e.g.
-#
-# make -f makefile.unix WXDEBUG=''
+# Customize this file to match your own settings.
#
-# You may prefer to use the GNU configure script than raw makefiles -
-# see contrib/wxshlib.
+# CVS_ID: $Id$
#
+# If using Cygwin beta, set this to 0.
+# If using Mingw32 or Cygwin 1.0 or later, set this to 1.
+MINGW32=1
+
+# Set to the version you have
+MINGW32VERSION=2.95
+
+# If building DLL, the version
+WXVERSION=233
+
+ifndef UNICODE
+ UNICODE=0
+endif
+
+ifndef FINAL
+ FINAL=0
+endif
+
+ifndef wxUSE_GUI
+ wxUSE_GUI=1
+endif
+
+# Say yes if you have a "modern" linker that supports --shared option.
+# Note that you're probably going to wait forever for dlltool/gcc/etc
+# to build the DLL, so you should really use a newer linker that
+# supports --shared.
+LD_SUPPORTS_SHARED=yes
+
+# Set to the appropriate remove command (must support forward slashes)
+# You can get a suitable rm.exe from ports/mingw32/extra.zip on the ftp site.
+RM=rm -f
+
+# Set to the appropriate copy command (must support forward slashes)
+# You can get a suitable cp.exe from ports/mingw32/extra.zip on the ftp site.
+COPY=cp
+
+# Cross compiling? Provide the target prefix (eg., i386-mingw32-)
+# CROSS=i386-mingw32-
+
########################## Compiler ##################################
# C++ compiler
-# For AIX/CSet++: use CC = xlC
-# For IRIX: use CC = CC
-# CC = gcc-2.6.2
-CC = gcc --pipe -fvtable-thunks
+# Put a comment before --pipe for Cygwin, remove comment for Mingw32 2.95
+
+ifeq ($(MINGW32),1)
+ ifneq "$(findstring 2.95, $(MINGW32VERSION))" ""
+ CC = $(CROSS)gcc --pipe -fvtable-thunks
+ else
+ CC = $(CROSS)gcc
+ endif
+else
+ CC = $(CROSS)gcc
+endif
# C compiler for pure C programs
-# Typical: CC=g++ , CCC=gcc
-# CC=cl386 /Tp, CCC=cl386
-#
-# (Used only for XView, file sb_scrol.c)
-#
CCC = $(CC)
# Compiler used for LEX generated C
-CCLEX=gcc
+CCLEX=$(CROSS)gcc
-MAKE=make
+# This shouldn't be needed as make is supposed to define this
+# variable itself. Uncomment it if your make complains.
+#MAKE=make
-# LEX
+# LEX (currently unused)
LEX=flex # -t -L
-# YACC. yacc or bison
+# YACC (currently unused)
YACC=byacc
#YACC=bison
# Settings for Cyginw/Mingw32
-RESCOMP=windres.exe
+# Some versions of windres cannot cope with the --preprocessor
+# option. Uncomment the RCPREPROCESSOR line below if yours can.
+RESCOMP=$(CROSS)windres
RCINPUTSWITCH=-i
RCOUTPUTSWITCH=-o
RCINCSWITCH=--include-dir
RCDEFSWITCH=--define
+# Note that this can cause windres to fail (Win95/98 problem?)
+# but commenting out RCPREPROCESSOR then does the trick.
+#RCPREPROCESSOR=--preprocessor "$(CC) -c -E -xc-header -DRC_INVOKED"
+
+# Don't make this too long (e.g. by adding contrib/include/wx) because it will
+# truncate the command line
+# Note: --use-temp-file removed since Mingw32 2.95.2 doesn't recognise it
+RESFLAGS=$(RCPREPROCESSOR) $(RCINCSWITCH) $(WXDIR)/include $(RCEXTRAINC) $(RCDEFSWITCH) __WIN32__ $(RCDEFSWITCH) __WIN95__ $(RCDEFSWITCH) __GNUWIN32__
-RESFLAGS=$(RCINCSWITCH) $(WXDIR)/include $(RCDEFSWITCH) __WIN32__ $(RCDEFSWITCH) __WIN95__ $(RCDEFSWITCH) __GNUWIN32__
+# Needed to build a DLL if your linker does not support --shared option.
+AS = $(CROSS)as
+DLLTOOL = $(CROSS)dlltool
########################## Compiler flags #############################
# Miscellaneous compiler options
-# GRG: The __EGCS__ symbol is not needed anymore!
-OPTIONS= -DSTRICT # -D__MINGW32__ # -D__EGCS__
+# GRG: the __MINGW32__ option is not needed anymore
+# add "-DHAVE_W32API_H" if you have w32api >= 0.5
+OPTIONS = -DSTRICT # -D__MINGW32__
# Debugging information
-# AIX: comment out.
-# IRIX: -g3
-DEBUGFLAGS = -D__WXDEBUG__
+ifeq ($(FINAL),0)
+ DEBUGFLAGS = -g -D__WXDEBUG__
+endif
WIN95=1
APPVER=3.50
WINVERSION=-DWINVER=0x0350 -D__GNUWIN32__ -D__WIN32__ # Generic WIN32
else
-APPVER=3.50 # 4.0
+APPVER=4.0 # 3.50
# This means 'enable Windows 95 features' (in wxWindows and in VC++ 4.0).
WINVERSION=-DWINVER=0x0400 -D__WIN95__ -D__GNUWIN32__ -D__WIN32__
endif
# Warnings
WARN = -Wall
-# Which GUI, -Dwx_xview or -Dwx_motif (don't change this)
-GUI = -D__WXMSW__ -D__WINDOWS__
+# build wxbase/wxMSW
+ifeq ($(wxUSE_GUI),1)
+ TOOLKIT=msw
+ GUI = -D__WXMSW__ -D__WINDOWS__
+else
+ TOOLKIT=base
+ GUI = -D__WXMSW__ -D__WINDOWS__ -DwxUSE_GUI=0
+endif
+
-# according to Guillermo Rodriguez Garcia <guille@iies.es> this flag is
-# needed to make the standard div() function work - otherwise it returns
-# absolutely incorrect results and completely breaks the wxImage class
-# (where it's used extensively)
-# GRG: at least it is needed in mingw32-gcc2.8.1
-OPT = -fno-pcc-struct-return -O2 -fno-rtti -fno-exceptions
+# According to Guillermo Rodriguez Garcia <guille@iies.es>, the
+# -fno-pcc-struct-return option is needed to make the standard div()
+# function work - otherwise it returns absolutely incorrect results
+# which breaks the wxImage class. This is true at least for
+# mingw32-gcc2.8.1, don't know about others.
+ifeq ($(FINAL),1)
+ OPT = -fno-pcc-struct-return -O2 -fno-rtti -fno-exceptions
+else
+ OPT = -fno-pcc-struct-return -fno-rtti -fno-exceptions
+endif
# Options for ar archiver
# AROPTIONS = crs # For IRIX and Solaris (both SYSVR4).
+AR = $(CROSS)ar
AROPTIONS = ruv
-RANLIB = ranlib
+RANLIB = $(CROSS)ranlib
# Extra compiler libraries
COMPLIBS=
########################## Directories ###############################
-WINLIBS=-lstdc++ -lgcc \
- -lwinspool -lwinmm -lshell32 \
- -lcomctl32 -lctl3d32 -lodbc32 -ladvapi32 \
- -lole32 -loleaut32 -luuid \
- -lodbc32 -lwsock32# -loldnames
+OLELIBS=-lole32 -loleaut32 -luuid
+BASELIBS=-lstdc++ -lgcc -lodbc32 -lwsock32
+ifeq ($(wxUSE_GUI),1)
+ WINLIBS= $(BASELIBS) \
+ -lwinspool -lwinmm -lshell32 \
+ -lcomctl32 -lctl3d32 -lodbc32 -ladvapi32 \
+ -lodbc32 -lwsock32 -lopengl32 -lglu32 $(OLELIBS) # -loldnames
+else
+ WINLIBS=$(BASELIBS)
+endif
#WINLIBS=-lstdc++ -lgcc \
# -lwinspool -lwinmm -lshell32 \
WXSRC=$(WXDIR)/src/msw
WXINC=$(WXDIR)/include
WXBASESRC=$(WXDIR)/src/common
-WXLIB=$(WXDIR)/lib/$(LIBPREFIX)wx.$(LIBSUFF)
-INC = -I$(WXINC) -I$(WXDIR)/src/png -I$(WXDIR)/src/jpeg -I$(WXDIR)/src/zlib $(EXTRAINC) $(COMPPATHS) # -I$(WXDIR)/include/wx/msw/gnuwin32
+
+GNUWIN32EXTRA=-I$(WXDIR)/include/wx/msw/gnuwin32
+
+ifeq ($(MINGW32),1)
+ ifneq "$(findstring 2.95, $(MINGW32VERSION))" ""
+ GNUWIN32EXTRA=
+ endif
+endif
+
+#ifeq ($(MINGW32),1)
+#INC = -I$(WXINC) -I$(WXDIR)/contrib/include -I$(WXDIR)/src/png -I$(WXDIR)/src/jpeg -I$(WXDIR)/src/zlib -I$(WXDIR)/src/tiff $(EXTRAINC) $(COMPPATHS)
+#else
+INC = -I$(WXDIR)/lib/$(TOOLKIT)$(INCEXT) -I$(WXINC) -I$(WXDIR)/contrib/include -I$(WXDIR)/src/regex -I$(WXDIR)/src/png -I$(WXDIR)/src/jpeg -I$(WXDIR)/src/zlib -I$(WXDIR)/src/tiff $(EXTRAINC) $(COMPPATHS) -I$(WXDIR)/include/wx/msw/gnuwin32
+#endif
+
RCLFLAGS=-cpp "cpp -lang-c++ -DWIN32 -D_WIN32 -DRCL_INVOKED -I$(WXWIN)/include"
-#LIBS = -lctl3d32 $(WXLIB) $(WINLIBS) $(COMPLIBS)
-LIBS = $(WXLIB) $(WINLIBS) $(COMPLIBS) $(EXTRALIBS)
+ifdef WXUSINGDLL
+ # png, jpeg, etc are exported from wx dll, so skip and save on link time.
+ LIBS = $(EXTRALIBS) $(WXLIB) $(WINLIBS) $(COMPLIBS)
+else
+ LIBS = $(EXTRALIBS) $(WXLIB) -lregex -lpng -ljpeg -lzlib -ltiff $(WINLIBS) $(COMPLIBS)
+endif
WINFLAGS=-D_X86_=1 -DWIN32 -D_WIN32 $(WINVERSION)
# OBJDIR = objects$(GUISUFFIX)
OBJDIR = .
-# You shouldn't need to change these...
-CPPFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) $(WARN) $(OPT) $(EXTRACPPFLAGS)
-CFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) $(WARN) $(OPT) $(EXTRACFLAGS)
-WINDOWSLDFLAGS=-Wl,--subsystem,windows -mwindows
-LDFLAGS = $(WINDOWSLDFLAGS) -L$(WXDIR)/lib $(EXTRALDFLAGS)
+ifeq ($(FINAL),1)
+ DEBEXT=
+else
+ DEBEXT=d
+endif
-.SUFFIXES: .rc .$(RESSUFF) .$(RSCSUFF) .cpp .c
+ifeq ($(UNICODE),1)
+ UNIEXT=u
+else
+ UNIEXT=
+endif
-# Set these in a batch file instead e.g. install/cygnus.bat
-# RCINCLUDE="$(WXDIR)/include/msw;$(WXDIR)/contrib/fafa;$(WXDIR)/contrib/itsybits"; \
-# CPLUS_INCLUDE_PATH=/usr/H-i386-cygwin32/i386-cygwin32/include:/usr/H-i386-cygwin32/lib/gcc-lib/i386-cygwin32/cygnus-2.7.2-961023/include:$(WXDIR)/include/common:$(WXDIR)/include/msw:$(WXDIR)/contrib/fafa:$(WXDIR)/contrib/itsybits; \
-# export CPLUS_INCLUDE_PATH RCINCLUDE; \
+ifeq ($(WXMAKINGDLL)$(WXUSINGDLL),)
+ INCEXT=$(UNIEXT)$(DEBEXT)
+else
+ INCEXT=dll$(UNIEXT)$(DEBEXT)
+endif
+
+WXLIB=$(WXDIR)/lib/$(LIBPREFIX)wx$(TOOLKIT)$(UNIEXT)$(DEBEXT).$(LIBSUFF)
-#.rc.$(RESSUFF): $< $(WXDIR)/include/msw/wx.rc
-# $(RC) $(RESFLAGS1) $< $(RESFLAGS2) $*.$(RESSUFF) $(RCLFLAGS)
+ifdef WXMAKINGDLL
+ EXTRADLLFLAGS = -DWXMAKINGDLL=1 -D_DLL=1 -D_WINDLL=1
+ WXLIB=$(WXDIR)/lib/$(LIBPREFIX)wx$(TOOLKIT)$(WXVERSION)$(UNIEXT)$(DEBEXT).$(LIBSUFF)
+endif
-#.$(RESSUFF).$(RSCSUFF): $<
-# $(CVTRES) $< $*.$(RSCSUFF)
+ifdef WXUSINGDLL
+ EXTRADLLFLAGS = -DWXUSINGDLL=1
+ WXLIB=$(WXDIR)/lib/$(LIBPREFIX)wx$(TOOLKIT)$(WXVERSION)$(UNIEXT)$(DEBEXT).$(LIBSUFF)
+endif
+
+
+# You shouldn't need to change these...
+CPPFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) $(WARN) $(OPT) $(EXTRACPPFLAGS) $(EXTRADLLFLAGS)
+CFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) $(WARN) $(OPT) $(EXTRACFLAGS) -DWIN32_LEAN_AND_MEAN
+ifeq ($(wxUSE_GUI),1)
+ WINDOWSLDFLAGS=-Wl,--subsystem,windows -mwindows
+endif
+LDFLAGS = $(WINDOWSLDFLAGS) -L$(WXDIR)/lib -L$(WXDIR)/contrib/lib $(EXTRALDFLAGS)
+
+.SUFFIXES: .rc .$(RESSUFF) .$(RSCSUFF) .cpp .cxx .c
+
+.c.o:
+ $(CC) -c $(CFLAGS) -o $@ $*.c
+
+.cxx.o:
+ $(CC) -c $(CPPFLAGS) -o $@ $*.cxx
.$(SRCSUFF).$(OBJSUFF):
$(CC) -c $(CPPFLAGS) -o $@ $*.$(SRCSUFF)
-.c.o:
- $(CC) -c $(CPPFLAGS) -o $@ $*.c
projects / wxWidgets.git / blobdiff