/////////////////////////////////////////////////////////////////////////////
#ifdef __GNUG__
-#pragma implementation
-#pragma interface
+#pragma implementation "dcpsg.h"
#endif
#include "wx/wxprec.h"
#if wxUSE_POSTSCRIPT
-#include "wx/window.h"
+#include "wx/setup.h"
+
#include "wx/dcmemory.h"
#include "wx/utils.h"
#include "wx/intl.h"
-#include "wx/filedlg.h"
#include "wx/app.h"
-#include "wx/msgdlg.h"
#include "wx/image.h"
#include "wx/log.h"
#include "wx/generic/dcpsg.h"
-#include "wx/printdlg.h"
-#include "wx/button.h"
-#include "wx/stattext.h"
-#include "wx/radiobox.h"
-#include "wx/textctrl.h"
#include "wx/prntbase.h"
#include "wx/paper.h"
#include "wx/filefn.h"
+#if WXWIN_COMPATIBILITY_2_2
+ #include "wx/window.h"
+ #include "wx/printdlg.h"
+#endif
#include <math.h>
// start and end of document/page
//-----------------------------------------------------------------------------
+static const char *wxPostScriptHeaderConicTo = "\
+/conicto {\n\
+ /to_y exch def\n\
+ /to_x exch def\n\
+ /conic_cntrl_y exch def\n\
+ /conic_cntrl_x exch def\n\
+ currentpoint\n\
+ /p0_y exch def\n\
+ /p0_x exch def\n\
+ /p1_x p0_x conic_cntrl_x p0_x sub 2 3 div mul add def\n\
+ /p1_y p0_y conic_cntrl_y p0_y sub 2 3 div mul add def\n\
+ /p2_x p1_x to_x p0_x sub 1 3 div mul add def\n\
+ /p2_y p1_y to_y p0_y sub 1 3 div mul add def\n\
+ p1_x p1_y p2_x p2_y to_x to_y curveto\n\
+} bind def\n\
+";
+
static const char *wxPostScriptHeaderEllipse = "\
/ellipsedict 8 dict def\n\
ellipsedict /mtrx matrix put\n\
} ifelse %% end of 'false' case\n\
";
+#if wxUSE_PANGO
+#else
static char wxPostScriptHeaderReencodeISO1[] =
"\n/reencodeISO {\n"
"dup dup findfont dup length dict begin\n"
"/otilde/odieresis/divide/oslash/ugrave/uacute/ucircumflex/udieresis\n"
"/yacute/thorn/ydieresis\n"
"] def\n\n";
+#endif
//-------------------------------------------------------------------------------
// wxPostScriptDC
//-------------------------------------------------------------------------------
-float wxPostScriptDC::ms_PSScaleFactor = 10.0;
+IMPLEMENT_DYNAMIC_CLASS(wxPostScriptDC, wxDC)
+
+float wxPostScriptDC::ms_PSScaleFactor = 1.0;
void wxPostScriptDC::SetResolution(int ppi)
{
return (int)(ms_PSScaleFactor * 72.0);
}
-
+//-------------------------------------------------------------------------------
wxPostScriptDC::wxPostScriptDC ()
{
m_signX = 1; // default x-axis left to right
m_signY = -1; // default y-axis bottom up -> top down
-
- // Compatibility only
- // HH: Doesn't seem to work for wxMSW...
- #ifndef __WXMSW__
- m_printData = * wxThePrintSetupData;
- #endif
-}
-
-wxPostScriptDC::wxPostScriptDC (const wxString& file, bool interactive, wxWindow *parent)
-{
- m_pstream = (FILE*) NULL;
-
- m_currentRed = 0;
- m_currentGreen = 0;
- m_currentBlue = 0;
-
- m_pageNumber = 0;
-
- m_clipping = FALSE;
-
- m_underlinePosition = 0.0;
- m_underlineThickness = 0.0;
-
- m_signX = 1; // default x-axis left to right
- m_signY = -1; // default y-axis bottom up -> top down
-
- Create(file, interactive, parent);
-}
-
-bool wxPostScriptDC::Create(const wxString& file, bool interactive, wxWindow *parent)
-{
- m_isInteractive = interactive;
-
- m_title = "";
- m_printData.SetFilename(file);
-
-#ifdef __WXMSW__
- // Can only send to file in Windows
- m_printData.SetPrintMode(wxPRINT_MODE_FILE);
-#endif
-
- if (m_isInteractive)
- {
- if ((m_ok = PrinterDialog (parent) ) == FALSE) return FALSE;
- }
- else
- {
- m_ok = TRUE;
- }
-
- return m_ok;
}
wxPostScriptDC::wxPostScriptDC (const wxPrintData& printData)
}
}
-bool wxPostScriptDC::Ok() const
-{
- return m_ok;
-}
-
-// This dialog is deprecated now: use wxGenericPrintDialog or the printing framework
-bool wxPostScriptDC::PrinterDialog(wxWindow *parent)
+#if WXWIN_COMPATIBILITY_2_2
+bool wxPostScriptDC::Create( const wxString &output, bool interactive, wxWindow *parent )
{
- wxPostScriptPrintDialog dialog( parent, _("Printer Settings"), wxPoint(150, 150), wxSize(400, 400),
- wxDEFAULT_DIALOG_STYLE | wxDIALOG_MODAL );
- m_ok = (dialog.ShowModal () == wxID_OK);
-
- if (!m_ok) return FALSE;
-
- if ((m_printData.GetFilename() == "") &&
- (m_printData.GetPrintMode() == wxPRINT_MODE_PREVIEW ||
- m_printData.GetPrintMode() == wxPRINT_MODE_PRINTER))
+ wxPrintData data;
+ data.SetFilename( output );
+ data.SetPrintMode( wxPRINT_MODE_FILE );
+
+ if (interactive)
{
-// steve, 05.09.94
-#ifdef __VMS__
- m_printData.SetFilename("preview");
-#else
- // For PS_PRINTER action this depends on a Unix-style print spooler
- // since the wx_printer_file can be destroyed during a session
- // @@@ TODO: a Windows-style answer for non-Unix
- wxChar userId[256];
- wxGetUserId (userId, sizeof (userId) / sizeof (char));
- wxChar tmp[256];
- wxStrcpy (tmp, wxT("/tmp/preview_"));
- wxStrcat (tmp, userId);
- m_printData.SetFilename(tmp);
-#endif
- wxChar tmp2[256];
- wxStrcpy(tmp2, m_printData.GetFilename());
- wxStrcat (tmp2, wxT(".ps"));
- m_printData.SetFilename(tmp2);
+ wxPrintDialogData ddata( data );
+ wxPrintDialog dialog( parent, &data );
+ dialog.GetPrintDialogData().SetSetupDialog(TRUE);
+ if (dialog.ShowModal() != wxID_OK)
+ {
+ m_ok = FALSE;
+ return FALSE;
+ }
+ data = dialog.GetPrintDialogData().GetPrintData();
}
- else if ((m_printData.GetFilename() == wxT("")) && (m_printData.GetPrintMode() == wxPRINT_MODE_FILE))
- {
- wxString file = wxSaveFileSelector (_("PostScript"), wxT("ps"));
- if ( file.IsEmpty() )
- {
- m_ok = FALSE;
- return FALSE;
- }
+
+ return TRUE;
+}
+#endif
- m_printData.SetFilename(file);
- m_ok = TRUE;
- }
- return m_ok;
+bool wxPostScriptDC::Ok() const
+{
+ return m_ok;
}
void wxPostScriptDC::DoSetClippingRegion (wxCoord x, wxCoord y, wxCoord w, wxCoord h)
"%d %d lineto\n"
"%d %d lineto\n"
"closepath clip newpath\n",
- XLOG2DEV(x), YLOG2DEV(y),
- XLOG2DEV(x+w), YLOG2DEV(y),
- XLOG2DEV(x+w), YLOG2DEV(y+h),
- XLOG2DEV(x), YLOG2DEV(y+h) );
+ LogicalToDeviceX(x), LogicalToDeviceY(y),
+ LogicalToDeviceX(x+w), LogicalToDeviceY(y),
+ LogicalToDeviceX(x+w), LogicalToDeviceY(y+h),
+ LogicalToDeviceX(x), LogicalToDeviceY(y+h) );
}
wxFAIL_MSG( wxT("wxPostScriptDC::Clear not implemented.") );
}
-void wxPostScriptDC::DoFloodFill (wxCoord WXUNUSED(x), wxCoord WXUNUSED(y), const wxColour &WXUNUSED(col), int WXUNUSED(style))
+bool wxPostScriptDC::DoFloodFill (wxCoord WXUNUSED(x), wxCoord WXUNUSED(y), const wxColour &WXUNUSED(col), int WXUNUSED(style))
{
wxFAIL_MSG( wxT("wxPostScriptDC::FloodFill not implemented.") );
+ return FALSE;
}
bool wxPostScriptDC::DoGetPixel (wxCoord WXUNUSED(x), wxCoord WXUNUSED(y), wxColour * WXUNUSED(col)) const
"%d %d moveto\n"
"%d %d lineto\n"
"stroke\n",
- XLOG2DEV(x1), YLOG2DEV(y1),
- XLOG2DEV(x2), YLOG2DEV (y2) );
+ LogicalToDeviceX(x1), LogicalToDeviceY(y1),
+ LogicalToDeviceX(x2), LogicalToDeviceY (y2) );
CalcBoundingBox( x1, y1 );
CalcBoundingBox( x2, y2 );
"%d %d lineto\n"
"closepath\n"
"fill\n",
- XLOG2DEV(xc), YLOG2DEV(yc), XLOG2DEVREL(radius), YLOG2DEVREL(radius), (wxCoord)alpha1, (wxCoord) alpha2,
- XLOG2DEV(xc), YLOG2DEV(yc) );
+ LogicalToDeviceX(xc), LogicalToDeviceY(yc), LogicalToDeviceXRel(radius), LogicalToDeviceYRel(radius), (wxCoord)alpha1, (wxCoord) alpha2,
+ LogicalToDeviceX(xc), LogicalToDeviceY(yc) );
CalcBoundingBox( xc-radius, yc-radius );
CalcBoundingBox( xc+radius, yc+radius );
"%d %d lineto\n"
"stroke\n"
"fill\n",
- XLOG2DEV(xc), YLOG2DEV(yc), XLOG2DEVREL(radius), YLOG2DEVREL(radius), (wxCoord)alpha1, (wxCoord) alpha2,
- XLOG2DEV(xc), YLOG2DEV(yc) );
+ LogicalToDeviceX(xc), LogicalToDeviceY(yc), LogicalToDeviceXRel(radius), LogicalToDeviceYRel(radius), (wxCoord)alpha1, (wxCoord) alpha2,
+ LogicalToDeviceX(xc), LogicalToDeviceY(yc) );
CalcBoundingBox( xc-radius, yc-radius );
CalcBoundingBox( xc+radius, yc+radius );
fprintf( m_pstream,
"newpath\n"
"%d %d %d %d %d %d true ellipticarc\n",
- XLOG2DEV(x+w/2), YLOG2DEV(y+h/2), XLOG2DEVREL(w/2), YLOG2DEVREL(h/2), (wxCoord)sa, (wxCoord)ea );
+ LogicalToDeviceX(x+w/2), LogicalToDeviceY(y+h/2), LogicalToDeviceXRel(w/2), LogicalToDeviceYRel(h/2), (wxCoord)sa, (wxCoord)ea );
CalcBoundingBox( x ,y );
CalcBoundingBox( x+w, y+h );
fprintf(m_pstream,
"newpath\n"
"%d %d %d %d %d %d false ellipticarc\n",
- XLOG2DEV(x+w/2), YLOG2DEV(y+h/2), XLOG2DEVREL(w/2), YLOG2DEVREL(h/2), (wxCoord)sa, (wxCoord)ea );
+ LogicalToDeviceX(x+w/2), LogicalToDeviceY(y+h/2), LogicalToDeviceXRel(w/2), LogicalToDeviceYRel(h/2), (wxCoord)sa, (wxCoord)ea );
CalcBoundingBox( x ,y );
CalcBoundingBox( x+w, y+h );
"%d %d moveto\n"
"%d %d lineto\n"
"stroke\n",
- XLOG2DEV(x), YLOG2DEV(y),
- XLOG2DEV(x+1), YLOG2DEV(y) );
+ LogicalToDeviceX(x), LogicalToDeviceY(y),
+ LogicalToDeviceX(x+1), LogicalToDeviceY(y) );
CalcBoundingBox( x, y );
}
fprintf( m_pstream, "newpath\n" );
- wxCoord xx = XLOG2DEV(points[0].x + xoffset);
- wxCoord yy = YLOG2DEV(points[0].y + yoffset);
+ wxCoord xx = LogicalToDeviceX(points[0].x + xoffset);
+ wxCoord yy = LogicalToDeviceY(points[0].y + yoffset);
fprintf( m_pstream, "%d %d moveto\n", xx, yy );
for (int i = 1; i < n; i++)
{
- xx = XLOG2DEV(points[i].x + xoffset);
- yy = YLOG2DEV(points[i].y + yoffset);
+ xx = LogicalToDeviceX(points[i].x + xoffset);
+ yy = LogicalToDeviceY(points[i].y + yoffset);
fprintf( m_pstream, "%d %d lineto\n", xx, yy );
fprintf( m_pstream, "newpath\n" );
- wxCoord xx = XLOG2DEV(points[0].x + xoffset);
- wxCoord yy = YLOG2DEV(points[0].y + yoffset);
+ wxCoord xx = LogicalToDeviceX(points[0].x + xoffset);
+ wxCoord yy = LogicalToDeviceY(points[0].y + yoffset);
fprintf( m_pstream, "%d %d moveto\n", xx, yy );
for (int i = 1; i < n; i++)
{
- xx = XLOG2DEV(points[i].x + xoffset);
- yy = YLOG2DEV(points[i].y + yoffset);
+ xx = LogicalToDeviceX(points[i].x + xoffset);
+ yy = LogicalToDeviceY(points[i].y + yoffset);
fprintf( m_pstream, "%d %d lineto\n", xx, yy );
int i;
for ( i =0; i<n ; i++ )
{
- CalcBoundingBox( XLOG2DEV(points[i].x+xoffset), YLOG2DEV(points[i].y+yoffset));
+ CalcBoundingBox( LogicalToDeviceX(points[i].x+xoffset), LogicalToDeviceY(points[i].y+yoffset));
}
fprintf( m_pstream,
"newpath\n"
"%d %d moveto\n",
- XLOG2DEV(points[0].x+xoffset), YLOG2DEV(points[0].y+yoffset) );
+ LogicalToDeviceX(points[0].x+xoffset), LogicalToDeviceY(points[0].y+yoffset) );
for (i = 1; i < n; i++)
{
fprintf( m_pstream,
"%d %d lineto\n",
- XLOG2DEV(points[i].x+xoffset), YLOG2DEV(points[i].y+yoffset) );
+ LogicalToDeviceX(points[i].x+xoffset), LogicalToDeviceY(points[i].y+yoffset) );
}
fprintf( m_pstream, "stroke\n" );
"%d %d lineto\n"
"closepath\n"
"fill\n",
- XLOG2DEV(x), YLOG2DEV(y),
- XLOG2DEV(x + width), YLOG2DEV(y),
- XLOG2DEV(x + width), YLOG2DEV(y + height),
- XLOG2DEV(x), YLOG2DEV(y + height) );
+ LogicalToDeviceX(x), LogicalToDeviceY(y),
+ LogicalToDeviceX(x + width), LogicalToDeviceY(y),
+ LogicalToDeviceX(x + width), LogicalToDeviceY(y + height),
+ LogicalToDeviceX(x), LogicalToDeviceY(y + height) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
"%d %d lineto\n"
"closepath\n"
"stroke\n",
- XLOG2DEV(x), YLOG2DEV(y),
- XLOG2DEV(x + width), YLOG2DEV(y),
- XLOG2DEV(x + width), YLOG2DEV(y + height),
- XLOG2DEV(x), YLOG2DEV(y + height) );
+ LogicalToDeviceX(x), LogicalToDeviceY(y),
+ LogicalToDeviceX(x + width), LogicalToDeviceY(y),
+ LogicalToDeviceX(x + width), LogicalToDeviceY(y + height),
+ LogicalToDeviceX(x), LogicalToDeviceY(y + height) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
"%d %d lineto\n"
"closepath\n"
"fill\n",
- XLOG2DEV(x + rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
- XLOG2DEV(x), YLOG2DEV(y + rad),
- XLOG2DEV(x + rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
- XLOG2DEV(x + width - rad), YLOG2DEV(y + height),
- XLOG2DEV(x + width - rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
- XLOG2DEV(x + width), YLOG2DEV(y + rad),
- XLOG2DEV(x + width - rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
- XLOG2DEV(x + rad), YLOG2DEV(y) );
+ LogicalToDeviceX(x + rad), LogicalToDeviceY(y + rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x), LogicalToDeviceY(y + rad),
+ LogicalToDeviceX(x + rad), LogicalToDeviceY(y + height - rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x + width - rad), LogicalToDeviceY(y + height),
+ LogicalToDeviceX(x + width - rad), LogicalToDeviceY(y + height - rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x + width), LogicalToDeviceY(y + rad),
+ LogicalToDeviceX(x + width - rad), LogicalToDeviceY(y + rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x + rad), LogicalToDeviceY(y) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
"%d %d lineto\n"
"closepath\n"
"stroke\n",
- XLOG2DEV(x + rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
- XLOG2DEV(x), YLOG2DEV(y + rad),
- XLOG2DEV(x + rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
- XLOG2DEV(x + width - rad), YLOG2DEV(y + height),
- XLOG2DEV(x + width - rad), YLOG2DEV(y + height - rad), XLOG2DEVREL(rad),
- XLOG2DEV(x + width), YLOG2DEV(y + rad),
- XLOG2DEV(x + width - rad), YLOG2DEV(y + rad), XLOG2DEVREL(rad),
- XLOG2DEV(x + rad), YLOG2DEV(y) );
+ LogicalToDeviceX(x + rad), LogicalToDeviceY(y + rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x), LogicalToDeviceY(y + rad),
+ LogicalToDeviceX(x + rad), LogicalToDeviceY(y + height - rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x + width - rad), LogicalToDeviceY(y + height),
+ LogicalToDeviceX(x + width - rad), LogicalToDeviceY(y + height - rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x + width), LogicalToDeviceY(y + rad),
+ LogicalToDeviceX(x + width - rad), LogicalToDeviceY(y + rad), LogicalToDeviceXRel(rad),
+ LogicalToDeviceX(x + rad), LogicalToDeviceY(y) );
CalcBoundingBox( x, y );
CalcBoundingBox( x + width, y + height );
"newpath\n"
"%d %d %d %d 0 360 ellipse\n"
"fill\n",
- XLOG2DEV(x + width / 2), YLOG2DEV(y + height / 2),
- XLOG2DEVREL(width / 2), YLOG2DEVREL(height / 2) );
+ LogicalToDeviceX(x + width / 2), LogicalToDeviceY(y + height / 2),
+ LogicalToDeviceXRel(width / 2), LogicalToDeviceYRel(height / 2) );
CalcBoundingBox( x - width, y - height );
CalcBoundingBox( x + width, y + height );
"newpath\n"
"%d %d %d %d 0 360 ellipse\n"
"stroke\n",
- XLOG2DEV(x + width / 2), YLOG2DEV(y + height / 2),
- XLOG2DEVREL(width / 2), YLOG2DEVREL(height / 2) );
+ LogicalToDeviceX(x + width / 2), LogicalToDeviceY(y + height / 2),
+ LogicalToDeviceXRel(width / 2), LogicalToDeviceYRel(height / 2) );
CalcBoundingBox( x - width, y - height );
CalcBoundingBox( x + width, y + height );
if (!bitmap.Ok()) return;
- wxImage image( bitmap );
+ wxImage image = bitmap.ConvertToImage();
if (!image.Ok()) return;
wxCoord w = image.GetWidth();
wxCoord h = image.GetHeight();
- wxCoord ww = XLOG2DEVREL(image.GetWidth());
- wxCoord hh = YLOG2DEVREL(image.GetHeight());
+ wxCoord ww = LogicalToDeviceXRel(image.GetWidth());
+ wxCoord hh = LogicalToDeviceYRel(image.GetHeight());
- wxCoord xx = XLOG2DEV(x);
- wxCoord yy = YLOG2DEV(y + bitmap.GetHeight());
+ wxCoord xx = LogicalToDeviceX(x);
+ wxCoord yy = LogicalToDeviceY(y + bitmap.GetHeight());
fprintf( m_pstream,
"/origstate save def\n"
m_font = font;
+#if wxUSE_PANGO
+#else
int Style = m_font.GetStyle();
int Weight = m_font.GetWeight();
fprintf( m_pstream, " findfont\n" );
char buffer[100];
- sprintf( buffer, "%f scalefont setfont\n", YLOG2DEVREL(m_font.GetPointSize() * 1000) / 1000.0F);
+ sprintf( buffer, "%f scalefont setfont\n", LogicalToDeviceYRel(m_font.GetPointSize() * 1000) / 1000.0F);
// this is a hack - we must scale font size (in pts) according to m_scaleY but
- // YLOG2DEVREL works with wxCoord type (int or longint). Se we first convert font size
+ // LogicalToDeviceYRel works with wxCoord type (int or longint). Se we first convert font size
// to 1/1000th of pt and then back.
for (int i = 0; i < 100; i++)
if (buffer[i] == ',') buffer[i] = '.';
fprintf( m_pstream, buffer );
+
+#endif
}
void wxPostScriptDC::SetPen( const wxPen& pen )
{
char buffer[100];
#ifdef __WXMSW__
- sprintf( buffer, "%f setlinewidth\n", XLOG2DEVREL(1000 * m_pen.GetWidth()) / 1000.0f );
+ sprintf( buffer, "%f setlinewidth\n", LogicalToDeviceXRel(1000 * m_pen.GetWidth()) / 1000.0f );
#else
- sprintf( buffer, "%f setlinewidth\n", XLOG2DEVREL(1000 * m_pen.GetWidth()) / 1000.0f );
+ sprintf( buffer, "%f setlinewidth\n", LogicalToDeviceXRel(1000 * m_pen.GetWidth()) / 1000.0f );
#endif
for (int i = 0; i < 100; i++)
if (buffer[i] == ',') buffer[i] = '.';
}
}
-void wxPostScriptDC::DoDrawText( const wxString& text, wxCoord x, wxCoord y )
+#if wxUSE_PANGO
+
+#define PANGO_ENABLE_ENGINE
+
+#ifdef __WXGTK20__
+#include "wx/gtk/private.h"
+#include "gtk/gtk.h"
+#else
+#include "wx/x11/private.h"
+#endif
+
+#include "wx/fontutil.h"
+#include <pango/pangoft2.h>
+#include <freetype/ftglyph.h>
+
+#ifndef FT_Outline_Decompose
+ FT_EXPORT( FT_Error ) FT_Outline_Decompose(
+ FT_Outline* outline,
+ const FT_Outline_Funcs* interface,
+ void* user );
+#endif
+
+typedef struct _OutlineInfo OutlineInfo;
+struct _OutlineInfo {
+ FILE *file;
+};
+
+static int paps_move_to( FT_Vector* to,
+ void *user_data)
{
- wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
+ OutlineInfo *outline_info = (OutlineInfo*)user_data;
+ fprintf(outline_info->file, "%d %d moveto\n",
+ (int)to->x ,
+ (int)to->y );
+ return 0;
+}
- wxCoord text_w, text_h, text_descent;
+static int paps_line_to( FT_Vector* to,
+ void *user_data)
+{
+ OutlineInfo *outline_info = (OutlineInfo*)user_data;
+ fprintf(outline_info->file, "%d %d lineto\n",
+ (int)to->x ,
+ (int)to->y );
+ return 0;
+}
- GetTextExtent(text, &text_w, &text_h, &text_descent);
+static int paps_conic_to( FT_Vector* control,
+ FT_Vector* to,
+ void *user_data)
+{
+ OutlineInfo *outline_info = (OutlineInfo*)user_data;
+ fprintf(outline_info->file, "%d %d %d %d conicto\n",
+ (int)control->x ,
+ (int)control->y ,
+ (int)to->x ,
+ (int)to->y );
+ return 0;
+}
- // VZ: this seems to be unnecessary, so taking it out for now, if it
- // doesn't create any problems, remove this comment entirely
- //SetFont( m_font );
+static int paps_cubic_to( FT_Vector* control1,
+ FT_Vector* control2,
+ FT_Vector* to,
+ void *user_data)
+{
+ OutlineInfo *outline_info = (OutlineInfo*)user_data;
+ fprintf(outline_info->file,
+ "%d %d %d %d %d %d curveto\n",
+ (int)control1->x ,
+ (int)control1->y ,
+ (int)control2->x ,
+ (int)control2->y ,
+ (int)to->x ,
+ (int)to->y );
+ return 0;
+}
+
+void draw_bezier_outline(FILE *file,
+ FT_Face face,
+ FT_UInt glyph_index,
+ int pos_x,
+ int pos_y,
+ double scale_x,
+ double scale_y )
+{
+ FT_Int load_flags = FT_LOAD_NO_BITMAP;
+ FT_Glyph glyph;
+
+ FT_Outline_Funcs outlinefunc =
+ {
+ paps_move_to,
+ paps_line_to,
+ paps_conic_to,
+ paps_cubic_to
+ };
+
+ OutlineInfo outline_info;
+ outline_info.file = file;
+
+ fprintf(file, "gsave\n");
+ fprintf(file, "%d %d translate\n", pos_x, pos_y );
+
+ // We have to replace the "," from the German
+ // locale with the Englich "." for PostScript
+ char buf[100];
+ sprintf(buf, "%.8f %.8f scale\n", scale_x, scale_y );
+ for (size_t i = 0; i < strlen(buf); i++)
+ if (buf[i] == ',') buf[i] = '.';
+ fprintf(file, buf);
+
+ FT_Load_Glyph(face, glyph_index, load_flags);
+ FT_Get_Glyph (face->glyph, &glyph);
+ FT_Outline_Decompose (&(((FT_OutlineGlyph)glyph)->outline),
+ &outlinefunc, &outline_info);
+ fprintf(file, "closepath fill grestore\n");
+
+ FT_Done_Glyph (glyph);
+}
+
+#endif
+
+void wxPostScriptDC::DoDrawText( const wxString& text, wxCoord x, wxCoord y )
+{
+ wxCHECK_RET( m_ok && m_pstream, wxT("invalid postscript dc") );
if (m_textForegroundColour.Ok())
{
sprintf( buffer,
"%.8f %.8f %.8f setrgbcolor\n",
redPS, greenPS, bluePS );
- for (int i = 0; i < 100; i++)
+ for (size_t i = 0; i < strlen(buffer); i++)
if (buffer[i] == ',') buffer[i] = '.';
fprintf( m_pstream, buffer );
m_currentGreen = green;
}
}
+
+#if wxUSE_PANGO
+ int ps_dpi = 72;
+ int pango_dpi = 600;
+ PangoContext *context = pango_ft2_get_context ( pango_dpi, pango_dpi );
+
+ double scale = (double)pango_dpi / (double)ps_dpi;
+ scale /= m_userScaleY;
+
+ pango_context_set_language (context, pango_language_from_string ("en_US"));
+ pango_context_set_base_dir (context, PANGO_DIRECTION_LTR );
+
+ pango_context_set_font_description (context, m_font.GetNativeFontInfo()->description );
+
+ PangoLayout *layout = pango_layout_new (context);
+#if wxUSE_UNICODE
+ wxCharBuffer buffer = wxConvUTF8.cWC2MB( text );
+#else
+ wxCharBuffer buffer = wxConvUTF8.cWC2MB( wxConvLocal.cWX2WC( text ) );
+#endif
+ pango_layout_set_text( layout, (const char*) buffer, strlen(buffer) );
+
+ fprintf( m_pstream, "%%%% %s\n", (const char*)buffer );
+
+ PangoRectangle rect;
+ pango_layout_get_extents(layout, NULL, &rect);
+
+ int xx = LogicalToDeviceX( x );
+ int yy = LogicalToDeviceY( y );
+
+ int xxx = xx * PANGO_SCALE;
+ int yyy = yy * PANGO_SCALE - (int)(rect.height * 0.66 / scale); // Move down by estimated baseline. HACK.
+
+#define ps_kludge_factor 2.8
+
+ // Loop over lines in layout
+ int num_lines = pango_layout_get_line_count( layout );
+ for (int i = 0; i < num_lines; i++)
+ {
+ PangoLayoutLine *line = pango_layout_get_line( layout, i );
+
+ // width of glyphs already printed
+ int all_width = 0;
+
+ // Loop over runs in line
+ GSList *runs_list = line->runs;
+ while (runs_list)
+ {
+ PangoLayoutRun *run = (PangoLayoutRun*) runs_list->data;
+ PangoItem *item = run->item;
+ PangoGlyphString *glyphs = run->glyphs;
+ PangoAnalysis *analysis = &item->analysis;
+ PangoFont *font = analysis->font;
+ FT_Face ft_face = pango_ft2_font_get_face(font);
+
+ int num_glyphs = glyphs->num_glyphs;
+ for (int glyph_idx = 0; glyph_idx < num_glyphs; glyph_idx++)
+ {
+ PangoGlyphGeometry geometry = glyphs->glyphs[glyph_idx].geometry;
+ int pos_x = xxx + (int)((double)(all_width+geometry.x_offset) / scale);
+ int pos_y = yyy + (int)((double)geometry.y_offset / scale );
+ all_width += geometry.width;
+
+ draw_bezier_outline( m_pstream, ft_face,
+ (FT_UInt)(glyphs->glyphs[glyph_idx].glyph),
+ pos_x / PANGO_SCALE,
+ pos_y / PANGO_SCALE,
+ 1.0/(ps_kludge_factor * scale * 26.6),
+ 1.0/(ps_kludge_factor * scale * 26.6) );
+ }
+ runs_list = runs_list->next;
+ }
+ }
+
+ g_object_unref( G_OBJECT( layout ) );
+ g_object_unref( G_OBJECT( context ) );
+#else
+ wxCoord text_w, text_h, text_descent;
+
+ GetTextExtent(text, &text_w, &text_h, &text_descent);
+
+ // VZ: this seems to be unnecessary, so taking it out for now, if it
+ // doesn't create any problems, remove this comment entirely
+ //SetFont( m_font );
+
int size = m_font.GetPointSize();
// commented by V. Slavik and replaced by accurate version
// - note that there is still rounding error in text_descent!
wxCoord by = y + size - text_descent; // baseline
- fprintf( m_pstream, "%d %d moveto\n", XLOG2DEV(x), YLOG2DEV(by) );
+ fprintf( m_pstream, "%d %d moveto\n", LogicalToDeviceX(x), LogicalToDeviceY(by) );
fprintf( m_pstream, "(" );
const wxWX2MBbuf textbuf = text.mb_str();
- int len = strlen(textbuf);
- int i;
+ size_t len = strlen(textbuf);
+ size_t i;
for (i = 0; i < len; i++)
{
int c = (unsigned char) textbuf[i];
"%d %d lineto\n"
"stroke\n"
"grestore\n",
- XLOG2DEV(x), YLOG2DEV(uy),
+ LogicalToDeviceX(x), LogicalToDeviceY(uy),
m_underlineThickness,
- XLOG2DEV(x + text_w), YLOG2DEV(uy) );
+ LogicalToDeviceX(x + text_w), LogicalToDeviceY(uy) );
for (i = 0; i < 100; i++)
if (buffer[i] == ',') buffer[i] = '.';
fprintf( m_pstream, buffer );
CalcBoundingBox( x, y );
CalcBoundingBox( x + size * text.Length() * 2/3 , y );
+#endif
}
void wxPostScriptDC::DoDrawRotatedText( const wxString& text, wxCoord x, wxCoord y, double angle )
int size = m_font.GetPointSize();
- long by = y + (long)floor( double(size) * 2.0 / 3.0 ); // approximate baseline
-
- // FIXME only correct for 90 degrees
fprintf(m_pstream, "%d %d moveto\n",
- XLOG2DEV((wxCoord)(x + size)), YLOG2DEV((wxCoord)by) );
+ LogicalToDeviceX(x), LogicalToDeviceY(y));
char buffer[100];
sprintf(buffer, "%.8f rotate\n", angle);
- int i;
+ size_t i;
for (i = 0; i < 100; i++)
if (buffer[i] == ',') buffer[i] = '.';
fprintf(m_pstream, buffer);
fprintf( m_pstream, "(" );
const wxWX2MBbuf textbuf = text.mb_str();
- int len = strlen(textbuf);
+ size_t len = strlen(textbuf);
for (i = 0; i < len; i++)
{
int c = (unsigned char) textbuf[i];
"%d %d lineto\n"
"stroke\n"
"grestore\n",
- XLOG2DEV(x), YLOG2DEV(uy),
+ LogicalToDeviceX(x), LogicalToDeviceY(uy),
m_underlineThickness,
- XLOG2DEV(x + w), YLOG2DEV(uy) );
+ LogicalToDeviceX(x + w), LogicalToDeviceY(uy) );
for (i = 0; i < 100; i++)
if (buffer[i] == ',') buffer[i] = '.';
fprintf( m_pstream, buffer );
double a, b, c, d, x1, y1, x2, y2, x3, y3;
wxPoint *p, *q;
- wxNode *node = points->First();
- p = (wxPoint *)node->Data();
+ wxNode *node = points->GetFirst();
+ p = (wxPoint *)node->GetData();
x1 = p->x;
y1 = p->y;
- node = node->Next();
- p = (wxPoint *)node->Data();
+ node = node->GetNext();
+ p = (wxPoint *)node->GetData();
c = p->x;
d = p->y;
x3 = a = (double)(x1 + c) / 2;
"newpath\n"
"%d %d moveto\n"
"%d %d lineto\n",
- XLOG2DEV((wxCoord)x1), YLOG2DEV((wxCoord)y1),
- XLOG2DEV((wxCoord)x3), YLOG2DEV((wxCoord)y3) );
+ LogicalToDeviceX((wxCoord)x1), LogicalToDeviceY((wxCoord)y1),
+ LogicalToDeviceX((wxCoord)x3), LogicalToDeviceY((wxCoord)y3) );
CalcBoundingBox( (wxCoord)x1, (wxCoord)y1 );
CalcBoundingBox( (wxCoord)x3, (wxCoord)y3 );
- while ((node = node->Next()) != NULL)
+ while ((node = node->GetNext()) != NULL)
{
- q = (wxPoint *)node->Data();
+ q = (wxPoint *)node->GetData();
x1 = x3;
y1 = y3;
fprintf( m_pstream,
"%d %d %d %d %d %d DrawSplineSection\n",
- XLOG2DEV((wxCoord)x1), YLOG2DEV((wxCoord)y1),
- XLOG2DEV((wxCoord)x2), YLOG2DEV((wxCoord)y2),
- XLOG2DEV((wxCoord)x3), YLOG2DEV((wxCoord)y3) );
+ LogicalToDeviceX((wxCoord)x1), LogicalToDeviceY((wxCoord)y1),
+ LogicalToDeviceX((wxCoord)x2), LogicalToDeviceY((wxCoord)y2),
+ LogicalToDeviceX((wxCoord)x3), LogicalToDeviceY((wxCoord)y3) );
CalcBoundingBox( (wxCoord)x1, (wxCoord)y1 );
CalcBoundingBox( (wxCoord)x3, (wxCoord)y3 );
fprintf( m_pstream,
"%d %d lineto\n"
"stroke\n",
- XLOG2DEV((wxCoord)c), YLOG2DEV((wxCoord)d) );
+ LogicalToDeviceX((wxCoord)c), LogicalToDeviceY((wxCoord)d) );
}
wxCoord wxPostScriptDC::GetCharWidth() const
{
wxCHECK_MSG( m_ok, FALSE, wxT("invalid postscript dc") );
- if (m_printData.GetFilename() == "")
+ if (m_printData.GetFilename() == wxT(""))
{
- wxString filename = wxGetTempFileName("ps");
+ wxString filename = wxGetTempFileName( wxT("ps") );
m_printData.SetFilename(filename);
}
- m_pstream = fopen( m_printData.GetFilename().fn_str(), "w+" );
+ m_pstream = wxFopen( m_printData.GetFilename().c_str(), wxT("w+") ); // FIXME: use fn_str() here under Unicode?
if (!m_pstream)
{
m_ok = TRUE;
+ fprintf( m_pstream, "%%!PS-Adobe-2.0\n" );
+ fprintf( m_pstream, "%%%%Title: %s\n", (const char *) m_title.ToAscii() );
+ fprintf( m_pstream, "%%%%Creator: wxWindows PostScript renderer\n" );
+ fprintf( m_pstream, "%%%%CreationDate: %s\n", (const char *) wxNow().ToAscii() );
+ if (m_printData.GetOrientation() == wxLANDSCAPE)
+ fprintf( m_pstream, "%%%%Orientation: Landscape\n" );
+ else
+ fprintf( m_pstream, "%%%%Orientation: Portrait\n" );
+
+ // fprintf( m_pstream, "%%%%Pages: %d\n", (wxPageNumber - 1) );
+
+ char *paper = "A4";
+ switch (m_printData.GetPaperId())
+ {
+ case wxPAPER_LETTER: paper = "Letter"; break; // Letter: paper ""; 8 1/2 by 11 inches
+ case wxPAPER_LEGAL: paper = "Legal"; break; // Legal, 8 1/2 by 14 inches
+ case wxPAPER_A4: paper = "A4"; break; // A4 Sheet, 210 by 297 millimeters
+ case wxPAPER_TABLOID: paper = "Tabloid"; break; // Tabloid, 11 by 17 inches
+ case wxPAPER_LEDGER: paper = "Ledger"; break; // Ledger, 17 by 11 inches
+ case wxPAPER_STATEMENT: paper = "Statement"; break; // Statement, 5 1/2 by 8 1/2 inches
+ case wxPAPER_EXECUTIVE: paper = "Executive"; break; // Executive, 7 1/4 by 10 1/2 inches
+ case wxPAPER_A3: paper = "A3"; break; // A3 sheet, 297 by 420 millimeters
+ case wxPAPER_A5: paper = "A5"; break; // A5 sheet, 148 by 210 millimeters
+ case wxPAPER_B4: paper = "B4"; break; // B4 sheet, 250 by 354 millimeters
+ case wxPAPER_B5: paper = "B5"; break; // B5 sheet, 182-by-257-millimeter paper
+ case wxPAPER_FOLIO: paper = "Folio"; break; // Folio, 8-1/2-by-13-inch paper
+ case wxPAPER_QUARTO: paper = "Quaro"; break; // Quarto, 215-by-275-millimeter paper
+ case wxPAPER_10X14: paper = "10x14"; break; // 10-by-14-inch sheet
+ default: paper = "A4";
+ }
+ fprintf( m_pstream, "%%%%DocumentPaperSizes: %s\n", paper );
+ fprintf( m_pstream, "%%%%EndComments\n\n" );
+
fprintf( m_pstream, "%%%%BeginProlog\n" );
+ fprintf( m_pstream, wxPostScriptHeaderConicTo );
fprintf( m_pstream, wxPostScriptHeaderEllipse );
fprintf( m_pstream, wxPostScriptHeaderEllipticArc );
fprintf( m_pstream, wxPostScriptHeaderColourImage );
+#if wxUSE_PANGO
+#else
fprintf( m_pstream, wxPostScriptHeaderReencodeISO1 );
fprintf( m_pstream, wxPostScriptHeaderReencodeISO2 );
+#endif
if (wxPostScriptHeaderSpline)
fprintf( m_pstream, wxPostScriptHeaderSpline );
fprintf( m_pstream, "%%%%EndProlog\n" );
fclose( m_pstream );
m_pstream = (FILE *) NULL;
- wxChar *header_file = wxGetTempFileName("ps");
-
- m_pstream = fopen( wxConvFile.cWX2MB(header_file) , "w+" );
-
- fprintf( m_pstream, "%%!PS-Adobe-2.0\n" ); // PostScript magic strings
- fprintf( m_pstream, "%%%%Title: %s\n", (const char *)m_title.mb_str() );
- fprintf( m_pstream, "%%%%Creator: %s\n", (const char*)wxConvCurrent->cWX2MB(wxTheApp->argv[0]) );
- fprintf( m_pstream, "%%%%CreationDate: %s\n", (const char *)wxNow().mb_str() );
-
- wxChar userID[256];
- if ( wxGetEmailAddress(userID, sizeof(userID)) )
- {
- fprintf( m_pstream, "%%%%For: %s ", wxMBSTRINGCAST wxConvCurrent->cWX2MB(userID) );
- wxChar userName[245];
- if (wxGetUserName(userName, sizeof(userName)))
- fprintf( m_pstream, " (%s)", wxMBSTRINGCAST wxConvCurrent->cWX2MB(userName) );
- fprintf( m_pstream, "\n" );
- }
- else if ( wxGetUserName(userID, sizeof(userID)) )
- {
- fprintf( m_pstream, "%%%%For: %s\n", wxMBSTRINGCAST wxConvCurrent->cWX2MB(userID) );;
- }
-
+#if 0
// THE FOLLOWING HAS BEEN CONTRIBUTED BY Andy Fyfe <andy@hyperparallel.com>
-
wxCoord wx_printer_translate_x, wx_printer_translate_y;
double wx_printer_scale_x, wx_printer_scale_y;
wx_printer_scale_x = m_printData.GetPrinterScaleX();
wx_printer_scale_y = m_printData.GetPrinterScaleY();
- if (m_printData.GetOrientation() == wxLANDSCAPE)
- fprintf( m_pstream, "%%%%Orientation: Landscape\n" );
- else
- fprintf( m_pstream, "%%%%Orientation: Portrait\n" );
-
// Compute the bounding box. Note that it is in the default user
// coordinate system, thus we have to convert the values.
- wxCoord minX = (wxCoord) XLOG2DEV(m_minX);
- wxCoord minY = (wxCoord) YLOG2DEV(m_minY);
- wxCoord maxX = (wxCoord) XLOG2DEV(m_maxX);
- wxCoord maxY = (wxCoord) YLOG2DEV(m_maxY);
+ wxCoord minX = (wxCoord) LogicalToDeviceX(m_minX);
+ wxCoord minY = (wxCoord) LogicalToDeviceY(m_minY);
+ wxCoord maxX = (wxCoord) LogicalToDeviceX(m_maxX);
+ wxCoord maxY = (wxCoord) LogicalToDeviceY(m_maxY);
// LOG2DEV may have changed the minimum to maximum vice versa
if ( minX > maxX ) { wxCoord tmp = minX; minX = maxX; maxX = tmp; }
"%%%%BoundingBox: %d %d %d %d\n",
(wxCoord)floor((double)llx), (wxCoord)floor((double)lly),
(wxCoord)ceil((double)urx), (wxCoord)ceil((double)ury) );
- fprintf( m_pstream, "%%%%Pages: %d\n", (wxPageNumber - 1) );
- fprintf( m_pstream, "%%%%EndComments\n\n" );
// To check the correctness of the bounding box, postscript commands
// to draw a box corresponding to the bounding box are generated below.
fprintf( m_pstream, "%% %d %d lineto\n", urx, lly );
fprintf( m_pstream, "%% %d %d lineto\n", urx, ury );
fprintf( m_pstream, "%% %d %d lineto closepath stroke\n", llx, ury );
-
- fclose( m_pstream );
- m_pstream = (FILE*) NULL;
-
- wxChar *tmp_file = wxGetTempFileName("ps");
-
- // Paste header Before wx_printer_file
- wxConcatFiles (header_file, m_printData.GetFilename(), tmp_file );
- wxRemoveFile( header_file );
- wxRemoveFile( m_printData.GetFilename() );
- wxRenameFile( tmp_file, m_printData.GetFilename() );
+#endif
#if defined(__X__) || defined(__WXGTK__)
- if (m_ok)
+ if (m_ok && (m_printData.GetPrintMode() == wxPRINT_MODE_PRINTER))
{
- wxString previewCommand(m_printData.GetPreviewCommand());
- wxString printerCommand(m_printData.GetPrinterCommand());
- wxString printerOptions(m_printData.GetPrinterOptions());
- wxString filename(m_printData.GetFilename());
+ wxString command;
+ command += m_printData.GetPrinterCommand();
+ command += wxT(" ");
+ command += m_printData.GetFilename();
- switch (m_printData.GetPrintMode())
- {
- case wxPRINT_MODE_PREVIEW:
- {
- wxChar *argv[3];
- argv[0] = WXSTRINGCAST previewCommand;
- argv[1] = WXSTRINGCAST filename;
- argv[2] = (wxChar*) NULL;
- wxExecute( argv, TRUE );
- wxRemoveFile( m_printData.GetFilename() );
- }
- break;
- case wxPRINT_MODE_PRINTER:
- {
- wxChar *argv[4];
- int argc = 0;
- argv[argc++] = WXSTRINGCAST printerCommand;
-
- // !SM! If we simply assign to argv[1] here, if printer options
- // are blank, we get an annoying and confusing message from lpr.
- wxChar *opts = WXSTRINGCAST printerOptions;
- if (opts && *opts)
- argv[argc++] = opts;
-
- argv[argc++] = WXSTRINGCAST filename;
- argv[argc++] = (wxChar *) NULL;
- wxExecute( argv, TRUE );
- wxRemoveFile( filename );
- }
- break;
- case wxPRINT_MODE_FILE:
- case wxPRINT_MODE_NONE:
- break;
- }
+ wxExecute( command, TRUE );
+ wxRemoveFile( m_printData.GetFilename() );
}
#endif
}
wxCHECK_RET( fontToUse, wxT("GetTextExtent: no font defined") );
+ if (string.IsEmpty())
+ {
+ if (x) (*x) = 0;
+ if (y) (*y) = 0;
+ return;
+ }
+
+#if wxUSE_PANGO
+ int wx_dpi = GetResolution();
+ int pango_dpi = 600;
+ PangoContext *context = pango_ft2_get_context ( pango_dpi, pango_dpi );
+
+ double scale = pango_dpi / wx_dpi;
+ scale /= m_userScaleY;
+
+ pango_context_set_language (context, pango_language_from_string ("en_US"));
+ pango_context_set_base_dir (context, PANGO_DIRECTION_LTR );
+
+ PangoLayout *layout = pango_layout_new (context);
+
+ PangoFontDescription *desc = fontToUse->GetNativeFontInfo()->description;
+ pango_layout_set_font_description(layout, desc);
+#if wxUSE_UNICODE
+ const wxCharBuffer data = wxConvUTF8.cWC2MB( string );
+#else
+ const wxWCharBuffer wdata = wxConvLocal.cMB2WC( string );
+ const wxCharBuffer data = wxConvUTF8.cWC2MB( wdata );
+#endif
+ pango_layout_set_text(layout, (const char*) data, strlen( (const char*) data ));
+ PangoLayoutLine *line = (PangoLayoutLine *)pango_layout_get_lines(layout)->data;
+
+ PangoRectangle rect;
+ pango_layout_line_get_extents(line, NULL, &rect);
+
+ if (x) (*x) = (wxCoord) ( rect.width / PANGO_SCALE / scale );
+ if (y) (*y) = (wxCoord) ( rect.height / PANGO_SCALE / scale );
+ if (descent)
+ {
+ // Do something about metrics here
+ (*descent) = 0;
+ }
+ if (externalLeading) (*externalLeading) = 0; // ??
+
+ g_object_unref( G_OBJECT( layout ) );
+#else
+ // GTK 2.0
+
const wxWX2MBbuf strbuf = string.mb_str();
#if !wxUSE_AFM_FOR_POSTSCRIPT
double UnderlinePosition = 0.0;
double UnderlineThickness = 0.0;
- /* get actual parameters */
+ // Get actual parameters
int Family = fontToUse->GetFamily();
int Size = fontToUse->GetPointSize();
int Style = fontToUse->GetStyle();
int Weight = fontToUse->GetWeight();
- /* if we have another font, read the font-metrics */
+ // If we have another font, read the font-metrics
if (Family!=lastFamily || Size!=lastSize || Style!=lastStyle || Weight!=lastWeight)
{
- /* store actual values */
+ // Store actual values
lastFamily = Family;
lastSize = Size;
lastStyle = Style;
lastWeight = Weight;
- char *name = (char*) NULL;
+ const wxChar *name = NULL;
switch (Family)
{
case wxMODERN:
case wxTELETYPE:
{
- if ((Style == wxITALIC) && (Weight == wxBOLD)) name = "CourBoO.afm";
- else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = "CourBo.afm";
- else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = "CourO.afm";
- else name = "Cour.afm";
+ if ((Style == wxITALIC) && (Weight == wxBOLD)) name = wxT("CourBoO.afm");
+ else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = wxT("CourBo.afm");
+ else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = wxT("CourO.afm");
+ else name = wxT("Cour.afm");
break;
}
case wxROMAN:
{
- if ((Style == wxITALIC) && (Weight == wxBOLD)) name = "TimesBoO.afm";
- else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = "TimesBo.afm";
- else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = "TimesO.afm";
- else name = "TimesRo.afm";
+ if ((Style == wxITALIC) && (Weight == wxBOLD)) name = wxT("TimesBoO.afm");
+ else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = wxT("TimesBo.afm");
+ else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = wxT("TimesO.afm");
+ else name = wxT("TimesRo.afm");
break;
}
case wxSCRIPT:
{
- name = "Zapf.afm";
+ name = wxT("Zapf.afm");
Style = wxNORMAL;
Weight = wxNORMAL;
}
case wxSWISS:
default:
{
- if ((Style == wxITALIC) && (Weight == wxBOLD)) name = "HelvBoO.afm";
- else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = "HelvBo.afm";
- else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = "HelvO.afm";
- else name = "Helv.afm";
+ if ((Style == wxITALIC) && (Weight == wxBOLD)) name = wxT("HelvBoO.afm");
+ else if ((Style != wxITALIC) && (Weight == wxBOLD)) name = wxT("HelvBo.afm");
+ else if ((Style == wxITALIC) && (Weight != wxBOLD)) name = wxT("HelvO.afm");
+ else name = wxT("Helv.afm");
break;
}
}
- /* get the directory of the AFM files */
- wxString afmName = wxEmptyString;
+ FILE *afmFile = NULL;
+
+ // Get the directory of the AFM files
+ wxString afmName;
if (!m_printData.GetFontMetricPath().IsEmpty())
{
afmName = m_printData.GetFontMetricPath();
- }
-
- /* 2. open and process the file
- / a short explanation of the AFM format:
- / we have for each character a line, which gives its size
- / e.g.:
- /
- / C 63 ; WX 444 ; N question ; B 49 -14 395 676 ;
- /
- / that means, we have a character with ascii code 63, and width
- / (444/1000 * fontSize) points.
- / the other data is ignored for now!
- /
- / when the font has changed, we read in the right AFM file and store the
- / character widths in an array, which is processed below (see point 3.). */
-
- /* new elements JC Sun Aug 25 23:21:44 MET DST 1996 */
-
- afmName << name;
- FILE *afmFile = wxFopen(afmName,wxT("r"));
-
- if (afmFile==NULL)
- {
- afmName = wxThePrintSetupData->GetAFMPath();
- afmName << wxFILE_SEP_PATH << name;
- afmFile = wxFopen(afmName,wxT("r"));
+ afmName << wxFILE_SEP_PATH << name;
+ afmFile = wxFopen(afmName,wxT("r"));
}
#if defined(__UNIX__) && !defined(__VMS__)
- if (afmFile==NULL)
- /* please do NOT change the line above to "else if (afmFile==NULL)" -
- - afmFile = fopen() may fail and in that case the next if branch
- MUST be executed - and it would not if there was "else" */
+ if (afmFile==NULL)
{
- afmName = wxGetInstallPrefix();
+ afmName = wxGetDataDir();
afmName << wxFILE_SEP_PATH
- << wxT("share") << wxFILE_SEP_PATH
- << wxT("wx") << wxFILE_SEP_PATH
#if defined(__LINUX__) || defined(__FREEBSD__)
<< wxT("gs_afm") << wxFILE_SEP_PATH
#else
}
#endif
+ /* 2. open and process the file
+ / a short explanation of the AFM format:
+ / we have for each character a line, which gives its size
+ / e.g.:
+ /
+ / C 63 ; WX 444 ; N question ; B 49 -14 395 676 ;
+ /
+ / that means, we have a character with ascii code 63, and width
+ / (444/1000 * fontSize) points.
+ / the other data is ignored for now!
+ /
+ / when the font has changed, we read in the right AFM file and store the
+ / character widths in an array, which is processed below (see point 3.). */
if (afmFile==NULL)
{
- wxLogDebug( wxT("GetTextExtent: can't open AFM file '%hs'"), afmName.c_str() );
+ wxLogDebug( wxT("GetTextExtent: can't open AFM file '%s'"), afmName.c_str() );
wxLogDebug( wxT(" using approximate values"));
for (int i=0; i<256; i++) lastWidths[i] = 500; /* an approximate value */
lastDescender = -150; /* dito. */
if ((sscanf(line,"%s%d",descString,&lastDescender)!=2) ||
(strcmp(descString,"Descender")!=0))
{
- wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad descender)"), afmName.c_str(),line );
+ wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad descender)"), afmName.c_str(),line );
}
}
/* JC 1.) check for UnderlinePosition */
if ((sscanf(line,"%s%lf",upString,&UnderlinePosition)!=2) ||
(strcmp(upString,"UnderlinePosition")!=0))
{
- wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad UnderlinePosition)"), afmName.c_str(), line );
+ wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad UnderlinePosition)"), afmName.c_str(), line );
}
}
/* JC 2.) check for UnderlineThickness */
if ((sscanf(line,"%s%lf",utString,&UnderlineThickness)!=2) ||
(strcmp(utString,"UnderlineThickness")!=0))
{
- wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad UnderlineThickness)"), afmName.c_str(), line );
+ wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad UnderlineThickness)"), afmName.c_str(), line );
}
}
/* JC 3.) check for EncodingScheme */
if ((sscanf(line,"%s%s",utString,encString)!=2) ||
(strcmp(utString,"EncodingScheme")!=0))
{
- wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (bad EncodingScheme)"), afmName.c_str(), line );
+ wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad EncodingScheme)"), afmName.c_str(), line );
}
else if (strncmp(encString, "AdobeStandardEncoding", 21))
{
- wxLogDebug( wxT("AFM-file '%hs': line '%hs' has error (unsupported EncodingScheme %hs)"),
+ wxLogDebug( wxT("AFM-file '%s': line '%s' has error (unsupported EncodingScheme %s)"),
afmName.c_str(),line, encString);
}
}
{
if (sscanf(line,"%s%d%s%s%d",cString,&ascii,semiString,WXString,&cWidth)!=5)
{
- wxLogDebug(wxT("AFM-file '%hs': line '%hs' has an error (bad character width)"),afmName.c_str(),line);
+ wxLogDebug(wxT("AFM-file '%s': line '%s' has an error (bad character width)"),afmName.c_str(),line);
}
if(strcmp(cString,"C")!=0 || strcmp(semiString,";")!=0 || strcmp(WXString,"WX")!=0)
{
- wxLogDebug(wxT("AFM-file '%hs': line '%hs' has a format error"),afmName.c_str(),line);
+ wxLogDebug(wxT("AFM-file '%s': line '%s' has a format error"),afmName.c_str(),line);
}
/* printf(" char '%c'=%d has width '%d'\n",ascii,ascii,cWidth); */
if (ascii>=0 && ascii<256)
// VS: dirty, but is there any better solution?
double *pt;
pt = (double*) &m_underlinePosition;
- *pt = YLOG2DEVREL((wxCoord)(UnderlinePosition * fontToUse->GetPointSize())) / 1000.0f;
+ *pt = LogicalToDeviceYRel((wxCoord)(UnderlinePosition * fontToUse->GetPointSize())) / 1000.0f;
pt = (double*) &m_underlineThickness;
- *pt = YLOG2DEVREL((wxCoord)(UnderlineThickness * fontToUse->GetPointSize())) / 1000.0f;
+ *pt = LogicalToDeviceYRel((wxCoord)(UnderlineThickness * fontToUse->GetPointSize())) / 1000.0f;
}
{
if(lastWidths[*p]== INT_MIN)
{
- wxLogDebug(wxT("GetTextExtent: undefined width for character '%hc' (%d)"), *p,*p);
+ wxLogDebug(wxT("GetTextExtent: undefined width for character '%c' (%d)"), *p,*p);
sum += lastWidths[' ']; /* assume space */
}
else
/* currently no idea how to calculate this! */
if (externalLeading) *externalLeading = 0;
-
-#endif
-}
-
-// Determine the Default Postscript Previewer
-// available on the platform
-#if defined(__SUN__) && defined(__XVIEW__)
-// OpenWindow/NeWS's Postscript Previewer
-# define PS_VIEWER_PROG "pageview"
-#elif defined(__VMS__)
-#define PS_VIEWER_PROG "view/format=ps/select=x_display"
-#elif defined(__SGI__)
-// SGI's Display Postscript Previewer
-//# define PS_VIEWER_PROG "dps"
-# define PS_VIEWER_PROG "xpsview"
-#elif defined(__X__) || defined(__WXGTK__)
-// Front-end to ghostscript
-# define PS_VIEWER_PROG "ghostview"
-#else
-// Windows ghostscript/ghostview
-# define PS_VIEWER_PROG "gsview"
-#endif
-
-wxPrintSetupData *wxThePrintSetupData = (wxPrintSetupData *) NULL;
-
-IMPLEMENT_DYNAMIC_CLASS(wxPostScriptDC, wxDC)
-IMPLEMENT_DYNAMIC_CLASS(wxPrintSetupData, wxObject)
-
-// Redundant now I think
-#if 1
-IMPLEMENT_CLASS(wxPostScriptPrintDialog, wxDialog)
-
-wxPostScriptPrintDialog::wxPostScriptPrintDialog (wxWindow *parent, const wxString& title,
- const wxPoint& pos, const wxSize& size, wxCoord style):
- wxDialog(parent, -1, title, pos, size, style)
-{
- wxBeginBusyCursor();
-
- char buf[100];
- int yPos = 40;
- wxString
- *orientation = new wxString[2],
- *print_modes = new wxString[3];
- int features;
- wxCoord wx_printer_translate_x, wx_printer_translate_y;
- double wx_printer_scale_x, wx_printer_scale_y;
-
- orientation[0] = _("Portrait");
- orientation[1] = _("Landscape");
-
- print_modes[0] = _("Send to Printer");
- print_modes[1] = _("Print to File");
- print_modes[2] = _("Preview Only");
-
-
-
- wxButton *okBut = new wxButton (this, wxID_OK, _("OK"), wxPoint(5, 5));
- (void) new wxButton (this, wxID_CANCEL, _("Cancel"), wxPoint(40, 5));
- okBut->SetDefault();
-
-
-#if defined(__WXGTK__) || defined (__WXMOTIF__)
- (void) new wxStaticText( this, -1, _("Printer Command: "),
- wxPoint(5, yPos) );
- (void) new wxTextCtrl( this, wxID_PRINTER_COMMAND, wxThePrintSetupData->GetPrinterCommand(),
- wxPoint(100, yPos), wxSize(100, -1) );
-
- (void) new wxStaticText( this, -1, _("Printer Options: "),
- wxPoint(210, yPos) );
- (void) new wxTextCtrl( this, wxID_PRINTER_OPTIONS, wxThePrintSetupData->GetPrinterOptions(),
- wxPoint(305, yPos), wxSize(150, -1) );
-
- yPos += 40;
-#endif
-
-
- wxRadioBox *radio0 = new wxRadioBox(this, wxID_PRINTER_ORIENTATION, "Orientation: ", wxPoint(5, yPos), wxSize(-1,-1),
- 2,orientation,2,wxRA_SPECIFY_ROWS);
- radio0->SetSelection((int)wxThePrintSetupData->GetPrinterOrientation() - 1);
-
- // @@@ Configuration hook
- if ( !wxThePrintSetupData->GetPrintPreviewCommand() )
- wxThePrintSetupData->SetPrintPreviewCommand(PS_VIEWER_PROG);
-
- // wxGetResource ("wxWindows", "PSView", &wxThePrintSetupData->m_previewCommand);
-
- features = (wxThePrintSetupData->GetPrintPreviewCommand() &&
- *wxThePrintSetupData->GetPrintPreviewCommand()) ? 3 : 2;
-
- wxRadioBox *radio1 = new wxRadioBox(this, wxID_PRINTER_MODES, _("PostScript:"),
- wxPoint(150, yPos),
- wxSize(-1,-1), features,
- print_modes, features, wxRA_SPECIFY_ROWS);
-
-#ifdef __WXMSW__
- radio1->Enable(0, FALSE);
- if (wxThePrintSetupData->GetPrintPreviewCommand() && *wxThePrintSetupData->GetPrintPreviewCommand())
- radio1->Enable(2, FALSE);
-#endif
-
- radio1->SetSelection((int)wxThePrintSetupData->GetPrinterMode());
- wxThePrintSetupData->GetPrinterTranslation(&wx_printer_translate_x, &wx_printer_translate_y);
- wxThePrintSetupData->GetPrinterScaling(&wx_printer_scale_x, &wx_printer_scale_y);
-
- sprintf (buf, "%.2f", wx_printer_scale_x);
-
- yPos += 90;
- (void) new wxStaticText(this, -1, _("X Scaling"), wxPoint(5, yPos));
- /* wxTextCtrl *text1 = */ (void) new wxTextCtrl(this, wxID_PRINTER_X_SCALE, buf, wxPoint(100, yPos), wxSize(100, -1));
-
- sprintf (buf, "%.2f", wx_printer_scale_y);
- (void) new wxStaticText(this, -1, _("Y Scaling"), wxPoint(220, yPos));
- /* wxTextCtrl *text2 = */ (void) new wxTextCtrl(this, wxID_PRINTER_Y_SCALE, buf, wxPoint(320, yPos), wxSize(100, -1));
-
- yPos += 25;
-
- (void) new wxStaticText(this, -1, _("X Translation"), wxPoint(5, yPos));
- sprintf (buf, "%.2d", wx_printer_translate_x);
- /* wxTextCtrl *text3 = */ (void) new wxTextCtrl(this, wxID_PRINTER_X_TRANS, buf, wxPoint(100, yPos), wxSize(100, -1));
-
- (void) new wxStaticText(this, -1, _("Y Translation"), wxPoint(220, yPos));
- sprintf (buf, "%.2d", wx_printer_translate_y);
- /* wxTextCtrl *text4 = */ (void) new wxTextCtrl(this, wxID_PRINTER_Y_TRANS, buf, wxPoint(320, yPos), wxSize(100, -1));
-
- Fit ();
-
- delete[] orientation;
- delete[] print_modes;
-
- wxEndBusyCursor();
-}
-
-int wxPostScriptPrintDialog::ShowModal ()
-{
- if ( wxDialog::ShowModal() == wxID_OK )
- {
-// wxTextCtrl *text0 = (wxTextCtrl *)FindWindow(wxID_PRINTER_OPTIONS);
- wxTextCtrl *text1 = (wxTextCtrl *)FindWindow(wxID_PRINTER_X_SCALE);
- wxTextCtrl *text2 = (wxTextCtrl *)FindWindow(wxID_PRINTER_Y_SCALE);
- wxTextCtrl *text3 = (wxTextCtrl *)FindWindow(wxID_PRINTER_X_TRANS);
- wxTextCtrl *text4 = (wxTextCtrl *)FindWindow(wxID_PRINTER_Y_TRANS);
-// wxTextCtrl *text_prt = (wxTextCtrl *)FindWindow(wxID_PRINTER_COMMAND);
- wxRadioBox *radio0 = (wxRadioBox *)FindWindow(wxID_PRINTER_ORIENTATION);
- wxRadioBox *radio1 = (wxRadioBox *)FindWindow(wxID_PRINTER_MODES);
-
- StringToDouble (WXSTRINGCAST text1->GetValue (), &wxThePrintSetupData->m_printerScaleX);
- StringToDouble (WXSTRINGCAST text2->GetValue (), &wxThePrintSetupData->m_printerScaleY);
-
- long dummy;
- StringToLong (WXSTRINGCAST text3->GetValue (), &dummy);
- wxThePrintSetupData->m_printerTranslateX = (wxCoord)dummy;
- StringToLong (WXSTRINGCAST text4->GetValue (), &dummy);
- wxThePrintSetupData->m_printerTranslateY = (wxCoord)dummy;
-
-#ifdef __X__
- // wxThePrintSetupData->SetPrinterOptions(WXSTRINGCAST text0->GetValue ());
- // wxThePrintSetupData->SetPrinterCommand(WXSTRINGCAST text_prt->GetValue ());
#endif
+ // Use AFM
- wxThePrintSetupData->SetPrinterOrientation((radio0->GetSelection() == 1 ? wxLANDSCAPE : wxPORTRAIT));
-
- // C++ wants this
- switch ( radio1->GetSelection() ) {
- case 0: wxThePrintSetupData->SetPrinterMode(PS_PRINTER); break;
- case 1: wxThePrintSetupData->SetPrinterMode(PS_FILE); break;
- case 2: wxThePrintSetupData->SetPrinterMode(PS_PREVIEW); break;
- }
- return wxID_OK;
- }
- return wxID_CANCEL;
-}
#endif
- // 0 (redundant)
-
-// PostScript printer settings
-// RETAINED FOR BACKWARD COMPATIBILITY
-void wxSetPrinterCommand(const wxString& cmd)
-{
- wxThePrintSetupData->SetPrinterCommand(cmd);
-}
-
-void wxSetPrintPreviewCommand(const wxString& cmd)
-{
- wxThePrintSetupData->SetPrintPreviewCommand(cmd);
-}
-
-void wxSetPrinterOptions(const wxString& flags)
-{
- wxThePrintSetupData->SetPrinterOptions(flags);
-}
-
-void wxSetPrinterFile(const wxString& f)
-{
- wxThePrintSetupData->SetPrinterFile(f);
+ // GTK 2.0
}
-void wxSetPrinterOrientation(int orient)
-{
- wxThePrintSetupData->SetPrinterOrientation(orient);
-}
-
-void wxSetPrinterScaling(double x, double y)
-{
- wxThePrintSetupData->SetPrinterScaling(x, y);
-}
-
-void wxSetPrinterTranslation(wxCoord x, wxCoord y)
-{
- wxThePrintSetupData->SetPrinterTranslation(x, y);
-}
-
-// 1 = Preview, 2 = print to file, 3 = send to printer
-void wxSetPrinterMode(int mode)
-{
- wxThePrintSetupData->SetPrinterMode(mode);
-}
-
-void wxSetAFMPath(const wxString& f)
-{
- wxThePrintSetupData->SetAFMPath(f);
-}
-
-// Get current values
-wxString wxGetPrinterCommand()
-{
- return wxThePrintSetupData->GetPrinterCommand();
-}
-
-wxString wxGetPrintPreviewCommand()
-{
- return wxThePrintSetupData->GetPrintPreviewCommand();
-}
-
-wxString wxGetPrinterOptions()
-{
- return wxThePrintSetupData->GetPrinterOptions();
-}
-
-wxString wxGetPrinterFile()
-{
- return wxThePrintSetupData->GetPrinterFile();
-}
-
-int wxGetPrinterOrientation()
-{
- return wxThePrintSetupData->GetPrinterOrientation();
-}
-
-void wxGetPrinterScaling(double* x, double* y)
-{
- wxThePrintSetupData->GetPrinterScaling(x, y);
-}
-
-void wxGetPrinterTranslation(wxCoord *x, wxCoord *y)
-{
- wxThePrintSetupData->GetPrinterTranslation(x, y);
-}
-
-int wxGetPrinterMode()
-{
- return wxThePrintSetupData->GetPrinterMode();
-}
-
-wxString wxGetAFMPath()
-{
- return wxThePrintSetupData->GetAFMPath();
-}
-
-/*
- * Print setup data
- */
-
-wxPrintSetupData::wxPrintSetupData()
-{
- m_printerOrient = wxPORTRAIT;
- m_printerScaleX = (double)1.0;
- m_printerScaleY = (double)1.0;
- m_printerTranslateX = 0;
- m_printerTranslateY = 0;
- m_printerMode = wxPRINT_MODE_FILE;
- m_printColour = TRUE;
-}
-
-wxPrintSetupData::~wxPrintSetupData()
-{
-}
-
-void wxPrintSetupData::operator=(wxPrintSetupData& data)
-{
- SetPrinterCommand(data.GetPrinterCommand());
- SetPrintPreviewCommand(data.GetPrintPreviewCommand());
- SetPrinterOptions(data.GetPrinterOptions());
- wxCoord x, y;
- data.GetPrinterTranslation(&x, &y);
- SetPrinterTranslation(x, y);
-
- double x1, y1;
- data.GetPrinterScaling(&x1, &y1);
- SetPrinterScaling(x1, y1);
-
- SetPrinterOrientation(data.GetPrinterOrientation());
- SetPrinterMode(data.GetPrinterMode());
- SetAFMPath(data.GetAFMPath());
- SetPaperName(data.GetPaperName());
- SetColour(data.GetColour());
-}
-
-// Initialize from a wxPrintData object (wxPrintData should now be used instead of wxPrintSetupData).
-void wxPrintSetupData::operator=(const wxPrintData& data)
-{
- SetPrinterCommand(data.GetPrinterCommand());
- SetPrintPreviewCommand(data.GetPreviewCommand());
- SetPrinterOptions(data.GetPrinterOptions());
- SetPrinterTranslation((wxCoord)data.GetPrinterTranslateX(),
- (wxCoord)data.GetPrinterTranslateY());
- SetPrinterScaling(data.GetPrinterScaleX(), data.GetPrinterScaleY());
- SetPrinterOrientation(data.GetOrientation());
- SetPrinterMode((int) data.GetPrintMode());
- SetAFMPath(data.GetFontMetricPath());
- SetPaperName(wxThePrintPaperDatabase->ConvertIdToName(data.GetPaperId()));
- SetColour(data.GetColour());
- SetPrinterFile(data.GetFilename());
-}
+#if WXWIN_COMPATIBILITY_2_2
+WXDLLEXPORT wxPrintSetupData *wxThePrintSetupData = 0;
void wxInitializePrintSetupData(bool init)
{
- if (init)
- {
- wxThePrintSetupData = new wxPrintSetupData;
-
- wxThePrintSetupData->SetPrintPreviewCommand(PS_VIEWER_PROG);
- wxThePrintSetupData->SetPrinterOrientation(wxPORTRAIT);
- wxThePrintSetupData->SetPrinterMode(wxPRINT_MODE_PREVIEW);
- wxThePrintSetupData->SetPaperName(_("A4 sheet, 210 x 297 mm"));
-
- // Could have a .ini file to read in some defaults
- // - and/or use environment variables, e.g. WXWIN
-#ifdef __VMS__
- wxThePrintSetupData->SetPrinterCommand("print");
- wxThePrintSetupData->SetPrinterOptions("/nonotify/queue=psqueue");
- wxThePrintSetupData->SetAFMPath("sys$ps_font_metrics:");
-#endif
-#ifdef __WXMSW__
- wxThePrintSetupData->SetPrinterCommand("print");
- wxThePrintSetupData->SetAFMPath("c:\\windows\\system\\");
- wxThePrintSetupData->SetPrinterOptions("");
-#endif
-#if !defined(__VMS__) && !defined(__WXMSW__)
- wxThePrintSetupData->SetPrinterCommand("lpr");
- wxThePrintSetupData->SetPrinterOptions("");
- wxThePrintSetupData->SetAFMPath("");
-#endif
- }
- else
- {
- if (wxThePrintSetupData)
- delete wxThePrintSetupData;
- wxThePrintSetupData = (wxPrintSetupData *) NULL;
- }
+ if (init)
+ {
+ // gets initialized in the constructor
+ wxThePrintSetupData = new wxPrintSetupData;
+ }
+ else
+ {
+ delete wxThePrintSetupData;
+
+ wxThePrintSetupData = (wxPrintSetupData *) NULL;
+ }
}
// A module to allow initialization/cleanup of PostScript-related
IMPLEMENT_DYNAMIC_CLASS(wxPostScriptModule, wxModule)
-/*
- * Initialization/cleanup module
- */
-
bool wxPostScriptModule::OnInit()
{
wxInitializePrintSetupData();
{
wxInitializePrintSetupData(FALSE);
}
+#endif
+ // WXWIN_COMPATIBILITY_2_2
#endif
// wxUSE_POSTSCRIPT
#endif
// wxUSE_PRINTING_ARCHITECTURE
+
+
+// vi:sts=4:sw=4:et
projects / wxWidgets.git / blobdiff