// Unicode support
// ----------------------------------------------------------------------------
-// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
-// defined as wchar_t, wxString will use Unicode internally. If you set this
-// to 1, you must use wxT() macro for all literal strings in the program.
-//
-// Unicode is currently only fully supported under Windows NT/2000/XP
-// (Windows 9x doesn't support it and the programs compiled in Unicode mode
-// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
-//
-// Default is 1
-//
-// Recommended setting: 1
+// These settings are obsolete: the library is always built in Unicode mode
+// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
+// absolutely necessary -- updating it is strongly recommended as the ANSI mode
+// will disappear completely in future wxWidgets releases.
#ifndef wxUSE_UNICODE
#define wxUSE_UNICODE 1
#endif
-// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
-// compiling the program in Unicode mode. More precisely, it will be possible
-// to construct wxString from a wide (Unicode) string and convert any wxString
-// to Unicode.
-//
-// Default is 1
-//
-// Recommended setting: 1
+// wxUSE_WCHAR_T is required by wxWidgets now, don't change.
#define wxUSE_WCHAR_T 1
// ----------------------------------------------------------------------------
// Recommended setting: 1 as setting it to 0 disables many other things
#define wxUSE_STREAMS 1
+// This is not a real option but is used as the default value for
+// wxUSE_STD_IOSTREAM and wxUSE_STD_STRING.
+//
+// Currently the Digital Mars and Watcom compilers come without standard C++
+// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
+// them (e.g. from STLPort).
+//
+// VC++ 5.0 does include standard C++ library headers, however they produce
+// many warnings that can't be turned off when compiled at warning level 4.
+#if defined(__DMC__) || defined(__WATCOMC__) \
+ || (defined(_MSC_VER) && _MSC_VER < 1200)
+ #define wxUSE_STD_DEFAULT 0
+#else
+ #define wxUSE_STD_DEFAULT 1
+#endif
+
// Use standard C++ streams if 1 instead of wx streams in some places. If
// disabled (default), wx streams are used everywhere and wxWidgets doesn't
// depend on the standard streams library.
// Recommended setting: 1 if you use the standard streams anyhow and so
// dependency on the standard streams library is not a
// problem
-#define wxUSE_STD_IOSTREAM 0
+#define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
// Enable conversion to standard C++ string if 1.
//
// Default is 1 for most compilers.
//
-// Currently the Digital Mars and Watcom compilers come without standard C++
-// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
-// them (e.g. from STLPort).
-//
-// VC++ 5.0 does include standard C++ library header, however they produce
-// many warnings that can't be turned off when compiled at warning level 4.
-#if defined(__DMC__) || defined(__WATCOMC__) \
- || (defined(_MSC_VER) && _MSC_VER < 1200)
- #define wxUSE_STD_STRING 0
-#else
- #define wxUSE_STD_STRING 1
-#endif
+// Recommended setting: 1 unless you want to ensure your program doesn't use
+// the standard C++ library at all.
+#define wxUSE_STD_STRING wxUSE_STD_DEFAULT
// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
// Note that if the system's implementation does not support positional
// Recommended setting: 1 (but can be safely disabled if you don't use it)
#define wxUSE_BASE64 1
+// Set this to 1 to be able to use wxEventLoop even in console applications
+// (i.e. using base library only, without GUI). This is mostly useful for
+// processing socket events but is also necessary to use timers in console
+// applications
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely disabled if you don't use it)
+#define wxUSE_CONSOLE_EVENTLOOP 1
+
// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
//
// i18n support: _() macro, wxLocale class. Requires wxTextFile.
#define wxUSE_INTL 1
+// Provide wxFoo_l() functions similar to standard foo() functions but taking
+// an extra locale parameter.
+//
+// Notice that this is fully implemented only for the systems providing POSIX
+// xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
+// almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
+// only work for the current user locale and "C" locale. You can use
+// wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
+//
+// Default is 1
+//
+// Recommended setting: 1 but may be disabled if you are writing programs
+// running only in C locale anyhow
+#define wxUSE_XLOCALE 1
+
// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
// allow to manipulate dates, times and time intervals. wxDateTime replaces the
// old wxTime and wxDate classes which are still provided for backwards
// Set to 1 to use socket classes
#define wxUSE_SOCKETS 1
+// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
+//
+// Notice that currently setting this option under Windows will result in
+// programs which can only run on recent OS versions (with ws2_32.dll
+// installed) which is why it is disabled by default.
+//
+// Default is 1.
+//
+// Recommended setting: 1 if you need IPv6 support
+#define wxUSE_IPV6 0
+
// Set to 1 to enable virtual file systems (required by wxHTML)
#define wxUSE_FILESYSTEM 1
// Joystick support class
#define wxUSE_JOYSTICK 1
+// wxFontEnumerator class
+#define wxUSE_FONTENUM 1
+
// wxFontMapper class
#define wxUSE_FONTMAP 1
#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
#define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
+#define wxUSE_FILECTRL 1 // wxFileCtrl
#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
#define wxUSE_GAUGE 1 // wxGauge
// Recommended setting: 0 (use wxNotebook)
#define wxUSE_TAB_DIALOG 0
+// wxTaskBarIcon is a small notification icon shown in the system toolbar or
+// dock.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be set to 0 if you don't need it)
+#define wxUSE_TASKBARICON 1
+
// wxGrid class
//
// Default is 1, set to 0 to cut down compilation time and binaries size if you
// Recommended setting: 1 (can't be disabled under MSW)
#define wxUSE_MENUS 1
+// Use wxNotificationMessage.
+//
+// wxNotificationMessage allows to show non-intrusive messages to the user
+// using balloons, banners, popups or whatever is the appropriate method for
+// the current platform.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTIFICATION_MESSAGE 1
+
// Use wxSashWindow class.
//
// Default is 1.
// wxValidator class and related methods
#define wxUSE_VALIDATORS 1
+// Use reference counted ID management: this means that wxWidgets will track
+// the automatically allocated ids (those used when you use wxID_ANY when
+// creating a window, menu or toolbar item &c) instead of just supposing that
+// the program never runs out of them. This is mostly useful only under wxMSW
+// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
+// long-running programs can run into problems with ids reuse without this. On
+// the other platforms, where the ids have the full int range, this shouldn't
+// be necessary.
+#ifdef __WXMSW__
+#define wxUSE_AUTOID_MANAGEMENT 1
+#else
+#define wxUSE_AUTOID_MANAGEMENT 0
+#endif
+
// ----------------------------------------------------------------------------
// common dialogs
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// wxSingleInstanceChecker class allows to verify at startup if another program
-// instance is running (it is only available under Win32)
+// instance is running.
//
// Default is 1
//
// to create fiels in SVG (Scalable Vector Graphics) format.
#define wxUSE_SVG 1
-// ----------------------------------------------------------------------------
-// database classes
-// ----------------------------------------------------------------------------
-
-// Define 1 to use ODBC classes
-#define wxUSE_ODBC 0
-
-// For backward compatibility reasons, this parameter now only controls the
-// default scrolling method used by cursors. This default behavior can be
-// overriden by setting the second param of wxDB::wxDbGetConnection() or
-// wxDb() constructor to indicate whether the connection (and any wxDbTable()s
-// that use the connection) should support forward only scrolling of cursors,
-// or both forward and backward support for backward scrolling cursors is
-// dependent on the data source as well as the ODBC driver being used.
-#define wxODBC_FWD_ONLY_CURSORS 1
-
-// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
-// member variables. With a setting of 1, full backward compatibility with the
-// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
-// as future development will be done only on the non-deprecated
-// functions/classes/member variables/etc.
-#define wxODBC_BACKWARD_COMPATABILITY 0
-
// ----------------------------------------------------------------------------
// other compiler (mis)features
// ----------------------------------------------------------------------------
#define REMOVE_UNUSED_ARG 1
// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
-// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
-// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
-// used anyhow.
+// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
//
-// Default is 1.
+// Note that newer compilers (including VC++ 7.1 and later) don't support
+// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
//
-// Recommended setting: whatever your compiler likes more
-#define wxUSE_IOSTREAMH 1
+// Default is 0.
+//
+// Recommended setting: 0, only set to 1 if you use a really old compiler
+#define wxUSE_IOSTREAMH 0
// ----------------------------------------------------------------------------
// image format support
/* --- end common options --- */
-// ----------------------------------------------------------------------------
-// Windows-only settings
-// ----------------------------------------------------------------------------
-
-// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
-// will override some other settings (see below)
-//
-// Default is 0.
-//
-// Recommended setting: 0 unless you really have to use MFC
-#define wxUSE_MFC 0
-
-// Set this to 1 for generic OLE support: this is required for drag-and-drop,
-// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
-// can't compile/doesn't have the OLE headers.
-//
-// Default is 1.
-//
-// Recommended setting: 1
-#define wxUSE_OLE 1
-
-// wxDC cacheing implementation
-#define wxUSE_DC_CACHEING 1
-
-// Set this to 1 to enable the use of DIB's for wxBitmap to support
-// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
-#define wxUSE_DIB_FOR_BITMAP 0
-
-// Set this to 1 to enable wxDIB
-#define wxUSE_WXDIB 1
-
-// Set to 0 to disable PostScript print/preview architecture code under Windows
-// (just use Windows printing).
-#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
-
-// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
-// which allows to put more than ~32Kb of text in it even under Win9x (NT
-// doesn't have such limitation).
-//
-// Default is 1 for compilers which support it
-//
-// Recommended setting: 1, only set it to 0 if your compiler doesn't have
-// or can't compile <richedit.h>
-#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
-#define wxUSE_RICHEDIT 1
-
-// TODO: This should be ifdef'ed for any compilers that don't support
-// RichEdit 2.0 but do have RichEdit 1.0...
-#define wxUSE_RICHEDIT2 1
-
-#else
-#define wxUSE_RICHEDIT 0
-#define wxUSE_RICHEDIT2 0
-#endif
-
-// Set this to 1 to enable support for the owner-drawn menu and listboxes. This
-// is required by wxUSE_CHECKLISTBOX.
-//
-// Default is 1.
-//
-// Recommended setting: 1, set to 0 for a small library size reduction
-#define wxUSE_OWNER_DRAWN 1
-
-// Set to 1 to compile MS Windows XP theme engine support
-#define wxUSE_UXTHEME 1
-
-// Set to 1 to auto-adapt to MS Windows XP themes where possible
-// (notably, wxNotebook pages)
-#define wxUSE_UXTHEME_AUTO 1
-
-// ----------------------------------------------------------------------------
-// Generic versions of native controls
-// ----------------------------------------------------------------------------
-
-// Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the
-// native wxDatePickerCtrl
-//
-// Default is 0.
-//
-// Recommended setting: 0, this is mainly used for testing
-#define wxUSE_DATEPICKCTRL_GENERIC 0
-
-// ----------------------------------------------------------------------------
-// Crash debugging helpers
-// ----------------------------------------------------------------------------
-
-// Set this to 1 to be able to use wxCrashReport::Generate() to create mini
-// dumps of your program when it crashes (or at any other moment)
-//
-// Default is 1 if supported by the compiler (VC++ and recent BC++ only).
-//
-// Recommended setting: 1, set to 0 if your programs never crash
-#define wxUSE_CRASHREPORT 0
-
-// ----------------------------------------------------------------------------
-// obsolete settings
-// ----------------------------------------------------------------------------
-
-// NB: all settings in this section are obsolete and should not be used/changed
-// at all, they will disappear
+/*
+ * Unix-specific options
+ */
+#define wxUSE_SELECT_DISPATCHER 1
+#define wxUSE_EPOLL_DISPATCHER 0
-// Define 1 to use bitmap messages.
-#define wxUSE_BITMAP_MESSAGE 1
+#define wxUSE_UNICODE_UTF8 0
+#define wxUSE_UTF8_LOCALE_ONLY 0
#endif // _WX_SETUP_H_
projects / wxWidgets.git / blobdiff