// Purpose: interface of wxToolBar
// Author: wxWidgets team
// RCS-ID: $Id$
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
/**
@class wxToolBar
- The name wxToolBar is defined to be a synonym for one of the following
- classes:
+ A toolbar is a bar of buttons and/or other controls usually placed below
+ the menu bar in a wxFrame.
- - @b wxToolBar95 - The native Windows 95 toolbar. Used on Windows 95, NT 4
- and above.
- - @b wxToolBarMSW - A Windows implementation. Used on 16-bit Windows.
- - @b wxToolBarGTK - The GTK toolbar.
-
- You may also create a toolbar that is managed by the frame, by calling
+ You may create a toolbar that is managed by a frame calling
wxFrame::CreateToolBar(). Under Pocket PC, you should always use this
function for creating the toolbar to be managed by the frame, so that
wxWidgets can use a combined menubar and toolbar. Where you manage your
- own toolbars, create a wxToolBar as usual.
-
- The meaning of a "separator" is a vertical line under Windows and simple
- space under GTK+.
-
- @b wxToolBar95: Note that this toolbar paints tools to reflect
- system-wide colours. If you use more than 16 colours in your tool
- bitmaps, you may wish to suppress this behaviour, otherwise system
- colours in your bitmaps will inadvertently be mapped to system colours.
+ own toolbars, create wxToolBar as usual.
+
+ There are several different types of tools you can add to a toolbar.
+ These types are controlled by the ::wxItemKind enumeration.
+
+ Note that many methods in wxToolBar such as wxToolBar::AddTool return a
+ @c wxToolBarToolBase* object.
+ This should be regarded as an opaque handle representing the newly added
+ toolbar item, providing access to its id and position within the toolbar.
+ Changes to the item's state should be made through calls to wxToolBar methods,
+ for example wxToolBar::EnableTool.
+ Calls to @c wxToolBarToolBase methods (undocumented by purpose) will not change
+ the visible state of the item within the the tool bar.
+
+ <b>wxMSW note</b>: Note that under wxMSW toolbar paints tools to reflect
+ system-wide colours. If you use more than 16 colours in your tool bitmaps,
+ you may wish to suppress this behaviour, otherwise system colours in your
+ bitmaps will inadvertently be mapped to system colours.
To do this, set the msw.remap system option before creating the toolbar:
-
@code
- wxSystemOptions::SetOption(wxT("msw.remap"), 0);
+ wxSystemOptions::SetOption("msw.remap", 0);
@endcode
-
If you wish to use 32-bit images (which include an alpha channel for
transparency) use:
-
@code
- wxSystemOptions::SetOption(wxT("msw.remap"), 2);
+ wxSystemOptions::SetOption("msw.remap", 2);
@endcode
-
Then colour remapping is switched off, and a transparent background
used. But only use this option under Windows XP with true colour:
-
@code
if (wxTheApp->GetComCtl32Version() >= 600 && ::wxDisplayDepth() >= 32)
@endcode
-
- There are several different types of tools you can add to a toolbar. These
- types are controlled by the ::wxItemKind enumeration.
@beginStyleTable
@style{wxTB_FLAT}
Align the toolbar at the right side of parent window.
@endStyleTable
- See also @ref overview_windowstyles. Note that the Win32 native toolbar
+ See also @ref overview_windowstyles. Note that the wxMSW native toolbar
ignores @c wxTB_NOICONS style. Also, toggling the @c wxTB_TEXT works only
if the style was initially on.
- @beginEventTable{wxCommandEvent}
+ @beginEventEmissionTable{wxCommandEvent}
@event{EVT_TOOL(id, func)}
Process a @c wxEVT_COMMAND_TOOL_CLICKED event (a synonym for @c
wxEVT_COMMAND_MENU_SELECTED). Pass the id of the tool.
The same as EVT_TOOL_RANGE().
@event{EVT_TOOL_RCLICKED(id, func)}
Process a @c wxEVT_COMMAND_TOOL_RCLICKED event. Pass the id of the
- tool.
+ tool. (Not available on wxOSX.)
@event{EVT_TOOL_RCLICKED_RANGE(id1, id2, func)}
Process a @c wxEVT_COMMAND_TOOL_RCLICKED event for a range of ids. Pass
- the ids of the tools.
+ the ids of the tools. (Not available on wxOSX.)
@event{EVT_TOOL_ENTER(id, func)}
Process a @c wxEVT_COMMAND_TOOL_ENTER event. Pass the id of the toolbar
itself. The value of wxCommandEvent::GetSelection() is the tool id, or
- -1 if the mouse cursor has moved off a tool.
+ -1 if the mouse cursor has moved off a tool. (Not available on wxOSX.)
@event{EVT_TOOL_DROPDOWN(id, func)}
Process a @c wxEVT_COMMAND_TOOL_DROPDOWN_CLICKED event. If unhandled,
displays the default dropdown menu set using
wxToolBar::SetDropdownMenu().
@endEventTable
-
+
The toolbar class emits menu commands in the same way that a frame menubar
does, so you can use one EVT_MENU() macro for both a menu item and a toolbar
button. The event handler functions take a wxCommandEvent argument. For most
event macros, the identifier of the tool is passed, but for EVT_TOOL_ENTER()
the toolbar window identifier is passed and the tool identifier is retrieved
- from the wxCommandEvent. This is because the identifier may be -1 when the
- mouse moves off a tool, and -1 is not allowed as an identifier in the event
+ from the wxCommandEvent. This is because the identifier may be @c wxID_ANY when the
+ mouse moves off a tool, and @c wxID_ANY is not allowed as an identifier in the event
system.
@library{wxcore}
@param id
Window identifier. If -1, will automatically create an identifier.
@param pos
- Window position. ::wxDefaultPosition is (-1, -1) which indicates that
- wxWidgets should generate a default position for the window. If
- using the wxWindow class directly, supply an actual position.
+ Window position. ::wxDefaultPosition indicates that wxWidgets should
+ generate a default position for the window.
+ If using the wxWindow class directly, supply an actual position.
@param size
- Window size. ::wxDefaultSize is (-1, -1) which indicates that
- wxWidgets should generate a default size for the window.
+ Window size. ::wxDefaultSize indicates that wxWidgets should generate
+ a default size for the window.
@param style
- Window style. See wxToolBar for details.
+ Window style. See wxToolBar initial description for details.
@param name
Window name.
@remarks After a toolbar is created, you use AddTool() and perhaps
- AddSeparator(), and then you must call Realize() to construct and
- display the toolbar tools.
+ AddSeparator(), and then you must call Realize() to construct
+ and display the toolbar tools.
*/
wxToolBar(wxWindow* parent, wxWindowID id,
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
- long style = wxTB_HORIZONTAL | wxBORDER_NONE,
- const wxString& name = wxPanelNameStr);
+ long style = wxTB_HORIZONTAL,
+ const wxString& name = wxToolBarNameStr);
/**
Toolbar destructor.
@see AddTool()
*/
- wxToolBarToolBase* AddCheckTool(int toolId,
- const wxString& label,
+ wxToolBarToolBase* AddCheckTool(int toolId, const wxString& label,
const wxBitmap& bitmap1,
- const wxBitmap& bitmap2,
- const wxString& shortHelpString = "",
- const wxString& longHelpString = "",
+ const wxBitmap& bmpDisabled = wxNullBitmap,
+ const wxString& shortHelp = wxEmptyString,
+ const wxString& longHelp = wxEmptyString,
wxObject* clientData = NULL);
/**
wxMac: labels are only displayed if wxWidgets is built with @c
wxMAC_USE_NATIVE_TOOLBAR set to 1
*/
- bool AddControl(wxControl* control, const wxString label = "");
+ virtual wxToolBarToolBase* AddControl(wxControl* control,
+ const wxString& label = wxEmptyString);
/**
Adds a new radio tool to the toolbar. Consecutive radio tools form a
previously pressed button is automatically released. You should avoid
having the radio groups of only one element as it would be impossible
for the user to use such button.
-
+
By default, the first button in the radio group is initially pressed,
the others are not.
@see AddTool()
*/
- wxToolBarToolBase* AddRadioTool(int toolId,
- const wxString& label,
+ wxToolBarToolBase* AddRadioTool(int toolId, const wxString& label,
const wxBitmap& bitmap1,
- const wxBitmap& bitmap2,
- const wxString& shortHelpString = "",
- const wxString& longHelpString = "",
+ const wxBitmap& bmpDisabled = wxNullBitmap,
+ const wxString& shortHelp = wxEmptyString,
+ const wxString& longHelp = wxEmptyString,
wxObject* clientData = NULL);
/**
Adds a separator for spacing groups of tools.
- @see AddTool(), SetToolSeparation()
+ Notice that the separator uses the look appropriate for the current
+ platform so it can be a vertical line (MSW, some versions of GTK) or
+ just an empty space or something else.
+
+ @see AddTool(), SetToolSeparation(), AddStretchableSpace()
*/
- void AddSeparator();
+ virtual wxToolBarToolBase* AddSeparator();
+ /**
+ Adds a stretchable space to the toolbar.
+
+ Any space not taken up by the fixed items (all items except for
+ stretchable spaces) is distributed in equal measure between the
+ stretchable spaces in the toolbar. The most common use for this method
+ is to add a single stretchable space before the items which should be
+ right-aligned in the toolbar, but more exotic possibilities are
+ possible, e.g. a stretchable space may be added in the beginning and
+ the end of the toolbar to centre all toolbar items.
+
+ @see AddTool(), AddSeparator(), InsertStretchableSpace()
+
+ @since 2.9.1
+ */
+ wxToolBarToolBase *AddStretchableSpace();
+
+ //@{
/**
Adds a tool to the toolbar.
The tool to be added.
@remarks After you have added tools to a toolbar, you must call
- Realize() in order to have the tools appear.
+ Realize() in order to have the tools appear.
@see AddSeparator(), AddCheckTool(), AddRadioTool(),
InsertTool(), DeleteTool(), Realize(), SetDropdownMenu()
virtual wxToolBarToolBase* AddTool(wxToolBarToolBase* tool);
/**
- Adds a tool to the toolbar. This most commonly used version has fewer
+ Adds a tool to the toolbar. This most commonly used version has fewer
parameters than the full version below which specifies the more rarely
used button features.
@param toolId
An integer by which the tool may be identified in subsequent
operations.
- @param label
+ @param label
The string to be displayed with the tool.
@param bitmap
The primary tool bitmap.
May be ::wxITEM_NORMAL for a normal button (default), ::wxITEM_CHECK
for a checkable tool (such tool stays pressed after it had been
toggled) or ::wxITEM_RADIO for a checkable tool which makes part of
- a radio group of tools each of which is automatically unchecked
+ a radio group of tools each of which is automatically unchecked
whenever another button in the group is checked. ::wxITEM_DROPDOWN
specifies that a drop-down menu button will appear next to the
tool button (only GTK+ and MSW). Call SetDropdownMenu() afterwards.
@param toolId
An integer by which the tool may be identified in subsequent
operations.
- @param label
+ @param label
The string to be displayed with the tool.
@param bitmap
The primary tool bitmap.
@param bmpDisabled
The bitmap used when the tool is disabled. If it is equal to
- ::wxNullBitmap (default), the disabled bitmap is automatically
+ ::wxNullBitmap (default), the disabled bitmap is automatically
generated by greying the normal one.
- @param shortHelpString
- This string is used for the tools tooltip.
- @param longHelpString
- This string is shown in the statusbar (if any) of the parent frame
- when the mouse pointer is inside the tool.
@param kind
May be ::wxITEM_NORMAL for a normal button (default), ::wxITEM_CHECK
for a checkable tool (such tool stays pressed after it had been
toggled) or ::wxITEM_RADIO for a checkable tool which makes part of
- a radio group of tools each of which is automatically unchecked
+ a radio group of tools each of which is automatically unchecked
whenever another button in the group is checked. ::wxITEM_DROPDOWN
specifies that a drop-down menu button will appear next to the
tool button (only GTK+ and MSW). Call SetDropdownMenu() afterwards.
+ @param shortHelpString
+ This string is used for the tools tooltip.
+ @param longHelpString
+ This string is shown in the statusbar (if any) of the parent frame
+ when the mouse pointer is inside the tool.
@param clientData
An optional pointer to client data which can be retrieved later
using GetToolClientData().
const wxString& shortHelpString = wxEmptyString,
const wxString& longHelpString = wxEmptyString,
wxObject* clientData = NULL);
+ //@}
/**
Deletes all the tools in the toolbar.
Enables or disables the tool.
@param toolId
- Tool to enable or disable.
+ ID of the tool to enable or disable, as passed to AddTool().
@param enable
If @true, enables the tool, otherwise disables it.
wxSize GetMargins() const;
/**
- Returns the size of bitmap that the toolbar expects to have. The default
- bitmap size is 16 by 15 pixels.
+ Returns the size of bitmap that the toolbar expects to have.
+
+ The default bitmap size is platform-dependent: for example, it is 16*15
+ for MSW and 24*24 for GTK. This size does @em not necessarily indicate
+ the best size to use for the toolbars on the given platform, for this
+ you should use @c wxArtProvider::GetNativeSizeHint(wxART_TOOLBAR) but
+ in any case, as the bitmap size is deduced automatically from the size
+ of the bitmaps associated with the tools added to the toolbar, it is
+ usually unnecessary to call SetToolBitmapSize() explicitly.
@remarks Note that this is the size of the bitmap you pass to AddTool(),
and not the eventual size of the tool button.
*/
virtual wxSize GetToolBitmapSize() const;
+ /**
+ Returns a pointer to the tool at ordinal position @a pos.
+
+ Don't confuse this with FindToolForPosition().
+
+ @since 2.9.1
+
+ @see GetToolsCount()
+ */
+ const wxToolBarToolBase *GetToolByPos(int pos) const;
+
/**
Get any client data associated with the tool.
@param toolId
- Id of the tool, as passed to AddTool().
+ ID of the tool in question, as passed to AddTool().
@return Client data, or @NULL if there is none.
*/
Called to determine whether a tool is enabled (responds to user input).
@param toolId
- Id of the tool in question.
+ ID of the tool in question, as passed to AddTool().
@return @true if the tool is enabled, @false otherwise.
Returns the long help for the given tool.
@param toolId
- The tool in question.
+ ID of the tool in question, as passed to AddTool().
@see SetToolLongHelp(), SetToolShortHelp()
*/
/**
Returns the tool position in the toolbar, or @c wxNOT_FOUND if the tool
is not found.
+
+ @param toolId
+ ID of the tool in question, as passed to AddTool().
*/
virtual int GetToolPos(int toolId) const;
Returns the short help for the given tool.
@param toolId
- The tool in question.
+ ID of the tool in question, as passed to AddTool().
@see GetToolLongHelp(), SetToolShortHelp()
*/
Gets the on/off state of a toggle tool.
@param toolId
- The tool in question.
+ ID of the tool in question, as passed to AddTool().
@return @true if the tool is toggled on, @false otherwise.
/**
Returns the number of tools in the toolbar.
*/
- int GetToolsCount() const;
+ size_t GetToolsCount() const;
/**
Inserts the control into the toolbar at the given position. You must
@see AddControl(), InsertTool()
*/
- wxToolBarToolBase* InsertControl(size_t pos, wxControl* control);
+ virtual wxToolBarToolBase* InsertControl(size_t pos, wxControl* control,
+ const wxString& label = wxEmptyString);
/**
Inserts the separator into the toolbar at the given position. You must
*/
virtual wxToolBarToolBase* InsertSeparator(size_t pos);
+ /**
+ Inserts a stretchable space at the given position.
+
+ See AddStretchableSpace() for details about stretchable spaces.
+
+ @see InsertTool(), InsertSeparator()
+
+ @since 2.9.1
+ */
+ wxToolBarToolBase *InsertStretchableSpace(size_t pos);
+
//@{
/**
Inserts the tool with the specified attributes into the toolbar at the
You must call Realize() for the change to take place.
@see AddTool(), InsertControl(), InsertSeparator()
+
+ @return The newly inserted tool or @NULL on failure. Notice that with
+ the overload taking @a tool parameter the caller is responsible for
+ deleting the tool in the latter case.
*/
wxToolBarToolBase* InsertTool(size_t pos, int toolId,
const wxBitmap& bitmap1,
const wxBitmap& bitmap2 = wxNullBitmap,
bool isToggle = false,
wxObject* clientData = NULL,
- const wxString& shortHelpString = "",
- const wxString& longHelpString = "");
+ const wxString& shortHelpString = wxEmptyString,
+ const wxString& longHelpString = wxEmptyString);
wxToolBarToolBase* InsertTool(size_t pos,
wxToolBarToolBase* tool);
//@}
@see OnMouseEnter(), OnLeftClick()
*/
- void OnRightClick(int toolId, float x, float y);
+ virtual void OnRightClick(int toolId, long x, long y);
/**
This function should be called after you have added tools.
*/
bool SetDropdownMenu(int id, wxMenu* menu);
+ //@{
/**
Set the values to be used as margins for the toolbar.
@see GetMargins(), wxSize
*/
void SetMargins(const wxSize& size);
+ //@}
/**
Sets the default size of each tool bitmap. The default bitmap size is 16
/**
Sets the client data associated with the tool.
+
+ @param id
+ ID of the tool in question, as passed to AddTool().
*/
virtual void SetToolClientData(int id, wxObject* clientData);
is in a disabled state. This can only be used on Button tools, not
controls.
+ @param id
+ ID of the tool in question, as passed to AddTool().
+
@note The native toolbar classes on the main platforms all synthesize
the disabled bitmap from the normal bitmap, so this function will
have no effect on those platforms.
Sets the long help for the given tool.
@param toolId
- The tool in question.
+ ID of the tool in question, as passed to AddTool().
@param helpString
A string for the long help.
/**
Sets the bitmap to be used by the tool with the given ID. This can only
be used on Button tools, not controls.
+
+ @param id
+ ID of the tool in question, as passed to AddTool().
*/
virtual void SetToolNormalBitmap(int id, const wxBitmap& bitmap);
@param packing
The value for packing.
- @remarks The packing is used for spacing in the vertical direction if
+ @remarks The packing is used for spacing in the vertical direction if
the toolbar is horizontal, and for spacing in the horizontal
direction if the toolbar is vertical.
Sets the short help for the given tool.
@param toolId
- The tool in question.
+ ID of the tool in question, as passed to AddTool().
@param helpString
The string for the short help.
Toggles a tool on or off. This does not cause any event to get emitted.
@param toolId
- Tool in question.
+ ID of the tool in question, as passed to AddTool().
@param toggle
If @true, toggles the tool on, otherwise toggles it off.
projects / wxWidgets.git / blobdiff