within OnDraw, to set the device origin for the device context according to the current
scroll position.
+A wxScrolledWindow will normally scroll itself and therefore its child windows as well. It
+might however be desired to scroll a different window than itself: e.g. when designing a
+spreadsheet, you will normally only have to scroll the (usually white) cell area, whereas the
+(usually grey) label area will scroll very differently. For this special purpose, you can
+call \helpref{SetTargetWindow}{wxscrolledwindowsettargetwindow} which means that pressing
+the scrollbars will scroll a different window.
+
+Note that the underlying system knows nothing about scrolling coordinates, so that all system
+functions (mouse events, expose events, refresh calls etc) as well as the position of subwindows
+are relative to the "physical" origin of the scrolled window. If the user insert a child window at
+position (10,10) and scrolls the window down 100 pixels (moving the child window out of the visible
+area), the child window will report a position of (10,-90).
+
+
\wxheading{Derived from}
\helpref{wxPanel}{wxpanel}\\
Translates the logical coordinates to the device ones. For example, if a window is
scrolled 10 pixels to the bottom, the device coordinates of the origin are (0, 0)
(as always), but the logical coordinates are (0, 10) and so the call to
-CalcScrolledPosition(0, 0, \&xx, \&yy) will return 10 in yy.
+CalcScrolledPosition(0, 10, \&xx, \&yy) will return 0 in yy.
\wxheading{See also}
\helpref{CalcUnscrolledPosition}{wxscrolledwindowcalcunscrolledposition}
+\pythonnote{The wxPython version of this methods accepts only two
+parameters and returns xx and yy as a tuple of values.}
+
+\perlnote{In wxPerl this method takes two parameters and returns a
+2-element list {\tt ( xx, yy )}.}
+
\membersection{wxScrolledWindow::CalcUnscrolledPosition}\label{wxscrolledwindowcalcunscrolledposition}
\constfunc{void}{CalcUnscrolledPosition}{
Translates the device coordinates to the logical ones. For example, if a window is
scrolled 10 pixels to the bottom, the device coordinates of the origin are (0, 0)
(as always), but the logical coordinates are (0, 10) and so the call to
-CalcUnscrolledPosition(0, 10, \&xx, \&yy) will return 0 in yy.
+CalcUnscrolledPosition(0, 0, \&xx, \&yy) will return 10 in yy.
\wxheading{See also}
\helpref{CalcScrolledPosition}{wxscrolledwindowcalcscrolledposition}
+\pythonnote{The wxPython version of this methods accepts only two
+parameters and returns xx and yy as a tuple of values.}
+
+\perlnote{In wxPerl this method takes two parameters and returns a
+2-element list {\tt ( xx, yy )}.}
+
\membersection{wxScrolledWindow::Create}\label{wxscrolledwindowcreate}
\func{bool}{Create}{\param{wxWindow*}{ parent}, \param{wxWindowID }{id = -1},\rtfsp
scrolling is the physical transfer of bits up or down the
screen when a scroll event occurs. If the application scrolls by a
variable amount (e.g. if there are different font sizes) then physical
-scrolling will not work, and you should switch it off.
+scrolling will not work, and you should switch it off. Note that you
+will have to reposition child windows yourself, if physical scrolling
+is disabled.
\wxheading{Parameters}
\helpref{wxScrolledWindow::SetScrollbars}{wxscrolledwindowsetscrollbars},\rtfsp
\helpref{wxScrolledWindow::GetVirtualSize}{wxscrolledwindowgetvirtualsize}
+\pythonnote{The wxPython version of this methods accepts no
+parameters and returns a tuple of values for xUnit and yUnit.}
+
+\perlnote{In wxPerl this method takes no parameters and returns a
+2-element list {\tt ( xUnit, yUnit )}.}
+
\membersection{wxScrolledWindow::GetVirtualSize}\label{wxscrolledwindowgetvirtualsize}
\constfunc{void}{GetVirtualSize}{\param{int* }{x}, \param{int* }{y}}
\helpref{wxScrolledWindow::SetScrollbars}{wxscrolledwindowsetscrollbars},\rtfsp
\helpref{wxScrolledWindow::GetScrollPixelsPerUnit}{wxscrolledwindowgetscrollpixelsperunit}
+\pythonnote{The wxPython version of this methods accepts no
+parameters and returns a tuple of values for x and y.}
+
+\perlnote{In wxPerl this method takes no parameters and returns a
+2-element list {\tt ( x, y )}.}
+
\membersection{wxScrolledWindow::IsRetained}\label{wxscrolledwindowisretained}
\constfunc{bool}{IsRetained}{\void}
\func{virtual void}{OnDraw}{\param{wxDC\& }{dc}}
Called by the default paint event handler to allow the application to define
-painting behaviour without having to worry about calling
+painting behaviour without having to worry about calling
\helpref{wxScrolledWindow::PrepareDC}{wxscrolledwindowpreparedc}.
Instead of overriding this function you may also just process the paint event
\func{void}{SetScrollbars}{\param{int}{ pixelsPerUnitX}, \param{int}{ pixelsPerUnitY},\rtfsp
\param{int}{ noUnitsX}, \param{int}{ noUnitsY},\rtfsp
-\param{int }{xPos = 0}, \param{int}{ yPos = 0}}
+\param{int }{xPos = 0}, \param{int}{ yPos = 0},\rtfsp
+\param{bool }{noRefresh = FALSE}}
Sets up vertical and/or horizontal scrollbars.
\docparam{yPos}{Position to initialize the scrollbars in the vertical direction, in scroll units.}
+\docparam{noRefresh}{Will not refresh window if TRUE.}
+
\wxheading{Remarks}
The first pair of parameters give the number of pixels per `scroll step', i.e. amount
necessary to derive a new class from wxWindow, overriding {\bf OnSize} and
adjusting the scrollbars appropriately.
-\membersection{wxScrolledWindow::ViewStart}\label{wxscrolledwindowviewstart}
+\membersection{wxScrolledWindow::SetTargetWindow}\label{wxscrolledwindowsettargetwindow}
+
+\func{void}{SetTargetWindow}{\param{wxWindow* }{window}}
-\constfunc{void}{ViewStart}{\param{int* }{x}, \param{int* }{ y}}
+Call this function to tell wxScrolledWindow to perform the actually scrolling on
+a different window (not on itself).
+
+\membersection{wxScrolledWindow::GetViewStart}\label{wxscrolledwindowgetviewstart}
+
+\constfunc{void}{GetViewStart}{\param{int* }{x}, \param{int* }{ y}}
Get the position at which the visible portion of the window starts.
\helpref{wxScrolledWindow::SetScrollbars}{wxscrolledwindowsetscrollbars}
+\pythonnote{The wxPython version of this methods accepts no
+parameters and returns a tuple of values for x and y.}
+
+\perlnote{In wxPerl this method takes no parameters and returns a
+2-element list {\tt ( x, y )}.}
+
projects / wxWidgets.git / blobdiff