+
+
+
+# Configure paths for GTK+
+# Owen Taylor 97-11-3
-# Configure paths for GTK+
-# Owen Taylor 97-11-3
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1018: checking host system type" >&5
+echo "configure:1021: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1039: checking target system type" >&5
+echo "configure:1042: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1057: checking build system type" >&5
+echo "configure:1060: checking build system type" >&5
build_alias=$build
case "$build_alias" in
WX_MAJOR_VERSION_NUMBER=2
-WX_MINOR_VERSION_NUMBER=3
-WX_RELEASE_NUMBER=3
+WX_MINOR_VERSION_NUMBER=5
+WX_RELEASE_NUMBER=0
WX_VERSION=$WX_MAJOR_VERSION_NUMBER.$WX_MINOR_VERSION_NUMBER.$WX_RELEASE_NUMBER
WX_RELEASE=$WX_MAJOR_VERSION_NUMBER.$WX_MINOR_VERSION_NUMBER
WX_MSW_VERSION=$WX_MAJOR_VERSION_NUMBER$WX_MINOR_VERSION_NUMBER$WX_RELEASE_NUMBER
-WX_CURRENT=2
+WX_CURRENT=0
WX_REVISION=0
WX_AGE=0
USE_BSD=1
USE_OPENBSD=1
cat >> confdefs.h <<\EOF
-#define __FREEBSD__ 1
+#define __OPENBSD__ 1
EOF
cat >> confdefs.h <<\EOF
-#define __OPENBSD__ 1
+#define __BSD__ 1
EOF
DEFAULT_DEFAULT_wxUSE_GTK=1
USE_BSD=1
USE_NETBSD=1
cat >> confdefs.h <<\EOF
-#define __FREEBSD__ 1
+#define __NETBSD__ 1
EOF
cat >> confdefs.h <<\EOF
-#define __NETBSD__ 1
+#define __BSD__ 1
EOF
DEFAULT_DEFAULT_wxUSE_GTK=1
USE_AIX=1
USE_SYSV=1
USE_SVR4=1
- SO_SUFFIX=a
+ SO_SUFFIX=a
cat >> confdefs.h <<\EOF
#define __AIX__ 1
EOF
DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE=yes
DEFAULT_wxUSE_PRINTING_ARCHITECTURE=yes
- DEFAULT_wxUSE_PROLOGIO=yes
- DEFAULT_wxUSE_RESOURCES=yes
+ DEFAULT_wxUSE_PROLOGIO=no
+ DEFAULT_wxUSE_RESOURCES=no
DEFAULT_wxUSE_CONSTRAINTS=yes
DEFAULT_wxUSE_IPC=yes
DEFAULT_wxUSE_HELP=yes
- echo $ac_n "checking for --enable-gui""... $ac_c" 1>&6
-echo "configure:1762: checking for --enable-gui" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-gui""... $ac_c" 1>&6
+echo "configure:1766: checking for --${enablestring:-enable}-gui" >&5
no_cache=0
# Check whether --enable-gui or --disable-gui was given.
if test "${enable_gui+set}" = set; then
if test "$wxUSE_GUI" = "yes"; then
- echo $ac_n "checking for --enable-universal""... $ac_c" 1>&6
-echo "configure:1804: checking for --enable-universal" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-universal""... $ac_c" 1>&6
+echo "configure:1809: checking for --${enablestring:-enable}-universal" >&5
no_cache=0
# Check whether --enable-universal or --disable-universal was given.
if test "${enable_universal+set}" = set; then
fi
- echo $ac_n "checking for --enable-nanox""... $ac_c" 1>&6
-echo "configure:1897: checking for --enable-nanox" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-nanox""... $ac_c" 1>&6
+echo "configure:1903: checking for --${enablestring:-enable}-nanox" >&5
no_cache=0
# Check whether --enable-nanox or --disable-nanox was given.
if test "${enable_nanox+set}" = set; then
- echo $ac_n "checking for --enable-gtk2""... $ac_c" 1>&6
-echo "configure:1937: checking for --enable-gtk2" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-gtk2""... $ac_c" 1>&6
+echo "configure:1944: checking for --${enablestring:-enable}-gtk2" >&5
no_cache=0
# Check whether --enable-gtk2 or --disable-gtk2 was given.
if test "${enable_gtk2+set}" = set; then
echo $ac_n "checking for --with-libpng""... $ac_c" 1>&6
-echo "configure:1977: checking for --with-libpng" >&5
+echo "configure:1984: checking for --with-libpng" >&5
no_cache=0
# Check whether --with-libpng or --without-libpng was given.
if test "${with_libpng+set}" = set; then
echo $ac_n "checking for --with-libjpeg""... $ac_c" 1>&6
-echo "configure:2028: checking for --with-libjpeg" >&5
+echo "configure:2035: checking for --with-libjpeg" >&5
no_cache=0
# Check whether --with-libjpeg or --without-libjpeg was given.
if test "${with_libjpeg+set}" = set; then
echo $ac_n "checking for --with-libtiff""... $ac_c" 1>&6
-echo "configure:2079: checking for --with-libtiff" >&5
+echo "configure:2086: checking for --with-libtiff" >&5
no_cache=0
# Check whether --with-libtiff or --without-libtiff was given.
if test "${with_libtiff+set}" = set; then
echo $ac_n "checking for --with-opengl""... $ac_c" 1>&6
-echo "configure:2130: checking for --with-opengl" >&5
+echo "configure:2137: checking for --with-opengl" >&5
no_cache=0
# Check whether --with-opengl or --without-opengl was given.
if test "${with_opengl+set}" = set; then
echo $ac_n "checking for --with-dmalloc""... $ac_c" 1>&6
-echo "configure:2172: checking for --with-dmalloc" >&5
+echo "configure:2179: checking for --with-dmalloc" >&5
no_cache=0
# Check whether --with-dmalloc or --without-dmalloc was given.
if test "${with_dmalloc+set}" = set; then
echo $ac_n "checking for --with-regex""... $ac_c" 1>&6
-echo "configure:2211: checking for --with-regex" >&5
+echo "configure:2218: checking for --with-regex" >&5
no_cache=0
# Check whether --with-regex or --without-regex was given.
if test "${with_regex+set}" = set; then
echo $ac_n "checking for --with-zlib""... $ac_c" 1>&6
-echo "configure:2262: checking for --with-zlib" >&5
+echo "configure:2269: checking for --with-zlib" >&5
no_cache=0
# Check whether --with-zlib or --without-zlib was given.
if test "${with_zlib+set}" = set; then
echo $ac_n "checking for --with-odbc""... $ac_c" 1>&6
-echo "configure:2313: checking for --with-odbc" >&5
+echo "configure:2320: checking for --with-odbc" >&5
no_cache=0
# Check whether --with-odbc or --without-odbc was given.
if test "${with_odbc+set}" = set; then
- echo $ac_n "checking for --enable-shared""... $ac_c" 1>&6
-echo "configure:2354: checking for --enable-shared" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-shared""... $ac_c" 1>&6
+echo "configure:2362: checking for --${enablestring:-enable}-shared" >&5
no_cache=0
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
fi
- echo $ac_n "checking for --enable-soname""... $ac_c" 1>&6
-echo "configure:2393: checking for --enable-soname" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-soname""... $ac_c" 1>&6
+echo "configure:2402: checking for --${enablestring:-enable}-soname" >&5
no_cache=0
# Check whether --enable-soname or --disable-soname was given.
if test "${enable_soname+set}" = set; then
fi
- echo $ac_n "checking for --enable-optimise""... $ac_c" 1>&6
-echo "configure:2432: checking for --enable-optimise" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-optimise""... $ac_c" 1>&6
+echo "configure:2442: checking for --${enablestring:-enable}-optimise" >&5
no_cache=0
# Check whether --enable-optimise or --disable-optimise was given.
if test "${enable_optimise+set}" = set; then
fi
- echo $ac_n "checking for --enable-debug""... $ac_c" 1>&6
-echo "configure:2471: checking for --enable-debug" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-debug""... $ac_c" 1>&6
+echo "configure:2482: checking for --${enablestring:-enable}-debug" >&5
no_cache=0
# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
- echo $ac_n "checking for --enable-precomp""... $ac_c" 1>&6
-echo "configure:2511: checking for --enable-precomp" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-precomp""... $ac_c" 1>&6
+echo "configure:2523: checking for --${enablestring:-enable}-precomp" >&5
no_cache=0
# Check whether --enable-precomp or --disable-precomp was given.
if test "${enable_precomp+set}" = set; then
fi
- echo $ac_n "checking for --enable-debug_flag""... $ac_c" 1>&6
-echo "configure:2559: checking for --enable-debug_flag" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-debug_flag""... $ac_c" 1>&6
+echo "configure:2572: checking for --${enablestring:-enable}-debug_flag" >&5
no_cache=0
# Check whether --enable-debug_flag or --disable-debug_flag was given.
if test "${enable_debug_flag+set}" = set; then
fi
- echo $ac_n "checking for --enable-debug_info""... $ac_c" 1>&6
-echo "configure:2598: checking for --enable-debug_info" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-debug_info""... $ac_c" 1>&6
+echo "configure:2612: checking for --${enablestring:-enable}-debug_info" >&5
no_cache=0
# Check whether --enable-debug_info or --disable-debug_info was given.
if test "${enable_debug_info+set}" = set; then
fi
- echo $ac_n "checking for --enable-debug_gdb""... $ac_c" 1>&6
-echo "configure:2637: checking for --enable-debug_gdb" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-debug_gdb""... $ac_c" 1>&6
+echo "configure:2652: checking for --${enablestring:-enable}-debug_gdb" >&5
no_cache=0
# Check whether --enable-debug_gdb or --disable-debug_gdb was given.
if test "${enable_debug_gdb+set}" = set; then
fi
- echo $ac_n "checking for --enable-debug_cntxt""... $ac_c" 1>&6
-echo "configure:2676: checking for --enable-debug_cntxt" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-debug_cntxt""... $ac_c" 1>&6
+echo "configure:2692: checking for --${enablestring:-enable}-debug_cntxt" >&5
no_cache=0
# Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
if test "${enable_debug_cntxt+set}" = set; then
fi
- echo $ac_n "checking for --enable-mem_tracing""... $ac_c" 1>&6
-echo "configure:2715: checking for --enable-mem_tracing" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-mem_tracing""... $ac_c" 1>&6
+echo "configure:2732: checking for --${enablestring:-enable}-mem_tracing" >&5
no_cache=0
# Check whether --enable-mem_tracing or --disable-mem_tracing was given.
if test "${enable_mem_tracing+set}" = set; then
fi
- echo $ac_n "checking for --enable-profile""... $ac_c" 1>&6
-echo "configure:2754: checking for --enable-profile" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-profile""... $ac_c" 1>&6
+echo "configure:2772: checking for --${enablestring:-enable}-profile" >&5
no_cache=0
# Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
fi
- echo $ac_n "checking for --enable-no_rtti""... $ac_c" 1>&6
-echo "configure:2793: checking for --enable-no_rtti" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-no_rtti""... $ac_c" 1>&6
+echo "configure:2812: checking for --${enablestring:-enable}-no_rtti" >&5
no_cache=0
# Check whether --enable-no_rtti or --disable-no_rtti was given.
if test "${enable_no_rtti+set}" = set; then
fi
- echo $ac_n "checking for --enable-no_exceptions""... $ac_c" 1>&6
-echo "configure:2832: checking for --enable-no_exceptions" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-no_exceptions""... $ac_c" 1>&6
+echo "configure:2852: checking for --${enablestring:-enable}-no_exceptions" >&5
no_cache=0
# Check whether --enable-no_exceptions or --disable-no_exceptions was given.
if test "${enable_no_exceptions+set}" = set; then
fi
- echo $ac_n "checking for --enable-permissive""... $ac_c" 1>&6
-echo "configure:2871: checking for --enable-permissive" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-permissive""... $ac_c" 1>&6
+echo "configure:2892: checking for --${enablestring:-enable}-permissive" >&5
no_cache=0
# Check whether --enable-permissive or --disable-permissive was given.
if test "${enable_permissive+set}" = set; then
fi
- echo $ac_n "checking for --enable-no_deps""... $ac_c" 1>&6
-echo "configure:2910: checking for --enable-no_deps" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-no_deps""... $ac_c" 1>&6
+echo "configure:2932: checking for --${enablestring:-enable}-no_deps" >&5
no_cache=0
# Check whether --enable-no_deps or --disable-no_deps was given.
if test "${enable_no_deps+set}" = set; then
- echo $ac_n "checking for --enable-compat20""... $ac_c" 1>&6
-echo "configure:2950: checking for --enable-compat20" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-compat20""... $ac_c" 1>&6
+echo "configure:2973: checking for --${enablestring:-enable}-compat20" >&5
no_cache=0
# Check whether --enable-compat20 or --disable-compat20 was given.
if test "${enable_compat20+set}" = set; then
fi
- echo $ac_n "checking for --enable-compat22""... $ac_c" 1>&6
-echo "configure:2989: checking for --enable-compat22" >&5
+ enablestring=disable
+ echo $ac_n "checking for --${enablestring:-enable}-compat22""... $ac_c" 1>&6
+echo "configure:3013: checking for --${enablestring:-enable}-compat22" >&5
no_cache=0
# Check whether --enable-compat22 or --disable-compat22 was given.
if test "${enable_compat22+set}" = set; then
- echo $ac_n "checking for --enable-intl""... $ac_c" 1>&6
-echo "configure:3042: checking for --enable-intl" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-intl""... $ac_c" 1>&6
+echo "configure:3067: checking for --${enablestring:-enable}-intl" >&5
no_cache=0
# Check whether --enable-intl or --disable-intl was given.
if test "${enable_intl+set}" = set; then
fi
- echo $ac_n "checking for --enable-config""... $ac_c" 1>&6
-echo "configure:3081: checking for --enable-config" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-config""... $ac_c" 1>&6
+echo "configure:3107: checking for --${enablestring:-enable}-config" >&5
no_cache=0
# Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
- echo $ac_n "checking for --enable-protocols""... $ac_c" 1>&6
-echo "configure:3121: checking for --enable-protocols" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-protocols""... $ac_c" 1>&6
+echo "configure:3148: checking for --${enablestring:-enable}-protocols" >&5
no_cache=0
# Check whether --enable-protocols or --disable-protocols was given.
if test "${enable_protocols+set}" = set; then
fi
- echo $ac_n "checking for --enable-ftp""... $ac_c" 1>&6
-echo "configure:3160: checking for --enable-ftp" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-ftp""... $ac_c" 1>&6
+echo "configure:3188: checking for --${enablestring:-enable}-ftp" >&5
no_cache=0
# Check whether --enable-ftp or --disable-ftp was given.
if test "${enable_ftp+set}" = set; then
fi
- echo $ac_n "checking for --enable-http""... $ac_c" 1>&6
-echo "configure:3199: checking for --enable-http" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-http""... $ac_c" 1>&6
+echo "configure:3228: checking for --${enablestring:-enable}-http" >&5
no_cache=0
# Check whether --enable-http or --disable-http was given.
if test "${enable_http+set}" = set; then
fi
- echo $ac_n "checking for --enable-fileproto""... $ac_c" 1>&6
-echo "configure:3238: checking for --enable-fileproto" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-fileproto""... $ac_c" 1>&6
+echo "configure:3268: checking for --${enablestring:-enable}-fileproto" >&5
no_cache=0
# Check whether --enable-fileproto or --disable-fileproto was given.
if test "${enable_fileproto+set}" = set; then
fi
- echo $ac_n "checking for --enable-sockets""... $ac_c" 1>&6
-echo "configure:3277: checking for --enable-sockets" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-sockets""... $ac_c" 1>&6
+echo "configure:3308: checking for --${enablestring:-enable}-sockets" >&5
no_cache=0
# Check whether --enable-sockets or --disable-sockets was given.
if test "${enable_sockets+set}" = set; then
fi
- echo $ac_n "checking for --enable-ole""... $ac_c" 1>&6
-echo "configure:3316: checking for --enable-ole" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-ole""... $ac_c" 1>&6
+echo "configure:3348: checking for --${enablestring:-enable}-ole" >&5
no_cache=0
# Check whether --enable-ole or --disable-ole was given.
if test "${enable_ole+set}" = set; then
fi
- echo $ac_n "checking for --enable-dataobj""... $ac_c" 1>&6
-echo "configure:3355: checking for --enable-dataobj" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-dataobj""... $ac_c" 1>&6
+echo "configure:3388: checking for --${enablestring:-enable}-dataobj" >&5
no_cache=0
# Check whether --enable-dataobj or --disable-dataobj was given.
if test "${enable_dataobj+set}" = set; then
- echo $ac_n "checking for --enable-ipc""... $ac_c" 1>&6
-echo "configure:3395: checking for --enable-ipc" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-ipc""... $ac_c" 1>&6
+echo "configure:3429: checking for --${enablestring:-enable}-ipc" >&5
no_cache=0
# Check whether --enable-ipc or --disable-ipc was given.
if test "${enable_ipc+set}" = set; then
- echo $ac_n "checking for --enable-cmdline""... $ac_c" 1>&6
-echo "configure:3435: checking for --enable-cmdline" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-cmdline""... $ac_c" 1>&6
+echo "configure:3470: checking for --${enablestring:-enable}-cmdline" >&5
no_cache=0
# Check whether --enable-cmdline or --disable-cmdline was given.
if test "${enable_cmdline+set}" = set; then
fi
- echo $ac_n "checking for --enable-datetime""... $ac_c" 1>&6
-echo "configure:3474: checking for --enable-datetime" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-datetime""... $ac_c" 1>&6
+echo "configure:3510: checking for --${enablestring:-enable}-datetime" >&5
no_cache=0
# Check whether --enable-datetime or --disable-datetime was given.
if test "${enable_datetime+set}" = set; then
fi
- echo $ac_n "checking for --enable-timedate""... $ac_c" 1>&6
-echo "configure:3513: checking for --enable-timedate" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-timedate""... $ac_c" 1>&6
+echo "configure:3550: checking for --${enablestring:-enable}-timedate" >&5
no_cache=0
# Check whether --enable-timedate or --disable-timedate was given.
if test "${enable_timedate+set}" = set; then
fi
- echo $ac_n "checking for --enable-stopwatch""... $ac_c" 1>&6
-echo "configure:3552: checking for --enable-stopwatch" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-stopwatch""... $ac_c" 1>&6
+echo "configure:3590: checking for --${enablestring:-enable}-stopwatch" >&5
no_cache=0
# Check whether --enable-stopwatch or --disable-stopwatch was given.
if test "${enable_stopwatch+set}" = set; then
fi
- echo $ac_n "checking for --enable-dialupman""... $ac_c" 1>&6
-echo "configure:3591: checking for --enable-dialupman" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-dialupman""... $ac_c" 1>&6
+echo "configure:3630: checking for --${enablestring:-enable}-dialupman" >&5
no_cache=0
# Check whether --enable-dialupman or --disable-dialupman was given.
if test "${enable_dialupman+set}" = set; then
fi
- echo $ac_n "checking for --enable-apple_ieee""... $ac_c" 1>&6
-echo "configure:3630: checking for --enable-apple_ieee" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-apple_ieee""... $ac_c" 1>&6
+echo "configure:3670: checking for --${enablestring:-enable}-apple_ieee" >&5
no_cache=0
# Check whether --enable-apple_ieee or --disable-apple_ieee was given.
if test "${enable_apple_ieee+set}" = set; then
fi
- echo $ac_n "checking for --enable-timer""... $ac_c" 1>&6
-echo "configure:3669: checking for --enable-timer" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-timer""... $ac_c" 1>&6
+echo "configure:3710: checking for --${enablestring:-enable}-timer" >&5
no_cache=0
# Check whether --enable-timer or --disable-timer was given.
if test "${enable_timer+set}" = set; then
fi
- echo $ac_n "checking for --enable-wave""... $ac_c" 1>&6
-echo "configure:3708: checking for --enable-wave" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-wave""... $ac_c" 1>&6
+echo "configure:3750: checking for --${enablestring:-enable}-wave" >&5
no_cache=0
# Check whether --enable-wave or --disable-wave was given.
if test "${enable_wave+set}" = set; then
fi
- echo $ac_n "checking for --enable-fraction""... $ac_c" 1>&6
-echo "configure:3747: checking for --enable-fraction" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-fraction""... $ac_c" 1>&6
+echo "configure:3790: checking for --${enablestring:-enable}-fraction" >&5
no_cache=0
# Check whether --enable-fraction or --disable-fraction was given.
if test "${enable_fraction+set}" = set; then
fi
- echo $ac_n "checking for --enable-dynlib""... $ac_c" 1>&6
-echo "configure:3786: checking for --enable-dynlib" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-dynlib""... $ac_c" 1>&6
+echo "configure:3830: checking for --${enablestring:-enable}-dynlib" >&5
no_cache=0
# Check whether --enable-dynlib or --disable-dynlib was given.
if test "${enable_dynlib+set}" = set; then
fi
- echo $ac_n "checking for --enable-dynamicloader""... $ac_c" 1>&6
-echo "configure:3825: checking for --enable-dynamicloader" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-dynamicloader""... $ac_c" 1>&6
+echo "configure:3870: checking for --${enablestring:-enable}-dynamicloader" >&5
no_cache=0
# Check whether --enable-dynamicloader or --disable-dynamicloader was given.
if test "${enable_dynamicloader+set}" = set; then
fi
- echo $ac_n "checking for --enable-longlong""... $ac_c" 1>&6
-echo "configure:3864: checking for --enable-longlong" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-longlong""... $ac_c" 1>&6
+echo "configure:3910: checking for --${enablestring:-enable}-longlong" >&5
no_cache=0
# Check whether --enable-longlong or --disable-longlong was given.
if test "${enable_longlong+set}" = set; then
fi
- echo $ac_n "checking for --enable-geometry""... $ac_c" 1>&6
-echo "configure:3903: checking for --enable-geometry" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-geometry""... $ac_c" 1>&6
+echo "configure:3950: checking for --${enablestring:-enable}-geometry" >&5
no_cache=0
# Check whether --enable-geometry or --disable-geometry was given.
if test "${enable_geometry+set}" = set; then
fi
- echo $ac_n "checking for --enable-log""... $ac_c" 1>&6
-echo "configure:3942: checking for --enable-log" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-log""... $ac_c" 1>&6
+echo "configure:3990: checking for --${enablestring:-enable}-log" >&5
no_cache=0
# Check whether --enable-log or --disable-log was given.
if test "${enable_log+set}" = set; then
fi
- echo $ac_n "checking for --enable-streams""... $ac_c" 1>&6
-echo "configure:3981: checking for --enable-streams" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-streams""... $ac_c" 1>&6
+echo "configure:4030: checking for --${enablestring:-enable}-streams" >&5
no_cache=0
# Check whether --enable-streams or --disable-streams was given.
if test "${enable_streams+set}" = set; then
fi
- echo $ac_n "checking for --enable-file""... $ac_c" 1>&6
-echo "configure:4020: checking for --enable-file" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-file""... $ac_c" 1>&6
+echo "configure:4070: checking for --${enablestring:-enable}-file" >&5
no_cache=0
# Check whether --enable-file or --disable-file was given.
if test "${enable_file+set}" = set; then
fi
- echo $ac_n "checking for --enable-ffile""... $ac_c" 1>&6
-echo "configure:4059: checking for --enable-ffile" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-ffile""... $ac_c" 1>&6
+echo "configure:4110: checking for --${enablestring:-enable}-ffile" >&5
no_cache=0
# Check whether --enable-ffile or --disable-ffile was given.
if test "${enable_ffile+set}" = set; then
fi
- echo $ac_n "checking for --enable-textbuf""... $ac_c" 1>&6
-echo "configure:4098: checking for --enable-textbuf" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-textbuf""... $ac_c" 1>&6
+echo "configure:4150: checking for --${enablestring:-enable}-textbuf" >&5
no_cache=0
# Check whether --enable-textbuf or --disable-textbuf was given.
if test "${enable_textbuf+set}" = set; then
fi
- echo $ac_n "checking for --enable-textfile""... $ac_c" 1>&6
-echo "configure:4137: checking for --enable-textfile" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-textfile""... $ac_c" 1>&6
+echo "configure:4190: checking for --${enablestring:-enable}-textfile" >&5
no_cache=0
# Check whether --enable-textfile or --disable-textfile was given.
if test "${enable_textfile+set}" = set; then
fi
- echo $ac_n "checking for --enable-fontmap""... $ac_c" 1>&6
-echo "configure:4176: checking for --enable-fontmap" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-fontmap""... $ac_c" 1>&6
+echo "configure:4230: checking for --${enablestring:-enable}-fontmap" >&5
no_cache=0
# Check whether --enable-fontmap or --disable-fontmap was given.
if test "${enable_fontmap+set}" = set; then
fi
- echo $ac_n "checking for --enable-unicode""... $ac_c" 1>&6
-echo "configure:4215: checking for --enable-unicode" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-unicode""... $ac_c" 1>&6
+echo "configure:4270: checking for --${enablestring:-enable}-unicode" >&5
no_cache=0
# Check whether --enable-unicode or --disable-unicode was given.
if test "${enable_unicode+set}" = set; then
fi
- echo $ac_n "checking for --enable-mslu""... $ac_c" 1>&6
-echo "configure:4254: checking for --enable-mslu" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-mslu""... $ac_c" 1>&6
+echo "configure:4310: checking for --${enablestring:-enable}-mslu" >&5
no_cache=0
# Check whether --enable-mslu or --disable-mslu was given.
if test "${enable_mslu+set}" = set; then
fi
- echo $ac_n "checking for --enable-wxprintfv""... $ac_c" 1>&6
-echo "configure:4293: checking for --enable-wxprintfv" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-wxprintfv""... $ac_c" 1>&6
+echo "configure:4350: checking for --${enablestring:-enable}-wxprintfv" >&5
no_cache=0
# Check whether --enable-wxprintfv or --disable-wxprintfv was given.
if test "${enable_wxprintfv+set}" = set; then
fi
- echo $ac_n "checking for --enable-std_iostreams""... $ac_c" 1>&6
-echo "configure:4332: checking for --enable-std_iostreams" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-std_iostreams""... $ac_c" 1>&6
+echo "configure:4390: checking for --${enablestring:-enable}-std_iostreams" >&5
no_cache=0
# Check whether --enable-std_iostreams or --disable-std_iostreams was given.
if test "${enable_std_iostreams+set}" = set; then
fi
- echo $ac_n "checking for --enable-filesystem""... $ac_c" 1>&6
-echo "configure:4371: checking for --enable-filesystem" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-filesystem""... $ac_c" 1>&6
+echo "configure:4430: checking for --${enablestring:-enable}-filesystem" >&5
no_cache=0
# Check whether --enable-filesystem or --disable-filesystem was given.
if test "${enable_filesystem+set}" = set; then
fi
- echo $ac_n "checking for --enable-fs_inet""... $ac_c" 1>&6
-echo "configure:4410: checking for --enable-fs_inet" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-fs_inet""... $ac_c" 1>&6
+echo "configure:4470: checking for --${enablestring:-enable}-fs_inet" >&5
no_cache=0
# Check whether --enable-fs_inet or --disable-fs_inet was given.
if test "${enable_fs_inet+set}" = set; then
fi
- echo $ac_n "checking for --enable-fs_zip""... $ac_c" 1>&6
-echo "configure:4449: checking for --enable-fs_zip" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-fs_zip""... $ac_c" 1>&6
+echo "configure:4510: checking for --${enablestring:-enable}-fs_zip" >&5
no_cache=0
# Check whether --enable-fs_zip or --disable-fs_zip was given.
if test "${enable_fs_zip+set}" = set; then
fi
- echo $ac_n "checking for --enable-zipstream""... $ac_c" 1>&6
-echo "configure:4488: checking for --enable-zipstream" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-zipstream""... $ac_c" 1>&6
+echo "configure:4550: checking for --${enablestring:-enable}-zipstream" >&5
no_cache=0
# Check whether --enable-zipstream or --disable-zipstream was given.
if test "${enable_zipstream+set}" = set; then
- echo $ac_n "checking for --enable-catch_segvs""... $ac_c" 1>&6
-echo "configure:4528: checking for --enable-catch_segvs" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-catch_segvs""... $ac_c" 1>&6
+echo "configure:4591: checking for --${enablestring:-enable}-catch_segvs" >&5
no_cache=0
# Check whether --enable-catch_segvs or --disable-catch_segvs was given.
if test "${enable_catch_segvs+set}" = set; then
fi
- echo $ac_n "checking for --enable-snglinst""... $ac_c" 1>&6
-echo "configure:4567: checking for --enable-snglinst" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-snglinst""... $ac_c" 1>&6
+echo "configure:4631: checking for --${enablestring:-enable}-snglinst" >&5
no_cache=0
# Check whether --enable-snglinst or --disable-snglinst was given.
if test "${enable_snglinst+set}" = set; then
- echo $ac_n "checking for --enable-mimetype""... $ac_c" 1>&6
-echo "configure:4607: checking for --enable-mimetype" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-mimetype""... $ac_c" 1>&6
+echo "configure:4672: checking for --${enablestring:-enable}-mimetype" >&5
no_cache=0
# Check whether --enable-mimetype or --disable-mimetype was given.
if test "${enable_mimetype+set}" = set; then
fi
- echo $ac_n "checking for --enable-system_options""... $ac_c" 1>&6
-echo "configure:4646: checking for --enable-system_options" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-system_options""... $ac_c" 1>&6
+echo "configure:4712: checking for --${enablestring:-enable}-system_options" >&5
no_cache=0
# Check whether --enable-system_options or --disable-system_options was given.
if test "${enable_system_options+set}" = set; then
- echo $ac_n "checking for --enable-url""... $ac_c" 1>&6
-echo "configure:4686: checking for --enable-url" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-url""... $ac_c" 1>&6
+echo "configure:4753: checking for --${enablestring:-enable}-url" >&5
no_cache=0
# Check whether --enable-url or --disable-url was given.
if test "${enable_url+set}" = set; then
fi
- echo $ac_n "checking for --enable-protocol""... $ac_c" 1>&6
-echo "configure:4725: checking for --enable-protocol" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-protocol""... $ac_c" 1>&6
+echo "configure:4793: checking for --${enablestring:-enable}-protocol" >&5
no_cache=0
# Check whether --enable-protocol or --disable-protocol was given.
if test "${enable_protocol+set}" = set; then
fi
- echo $ac_n "checking for --enable-protocol_http""... $ac_c" 1>&6
-echo "configure:4764: checking for --enable-protocol_http" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-protocol_http""... $ac_c" 1>&6
+echo "configure:4833: checking for --${enablestring:-enable}-protocol_http" >&5
no_cache=0
# Check whether --enable-protocol_http or --disable-protocol_http was given.
if test "${enable_protocol_http+set}" = set; then
fi
- echo $ac_n "checking for --enable-protocol_ftp""... $ac_c" 1>&6
-echo "configure:4803: checking for --enable-protocol_ftp" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-protocol_ftp""... $ac_c" 1>&6
+echo "configure:4873: checking for --${enablestring:-enable}-protocol_ftp" >&5
no_cache=0
# Check whether --enable-protocol_ftp or --disable-protocol_ftp was given.
if test "${enable_protocol_ftp+set}" = set; then
fi
- echo $ac_n "checking for --enable-protocol_file""... $ac_c" 1>&6
-echo "configure:4842: checking for --enable-protocol_file" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-protocol_file""... $ac_c" 1>&6
+echo "configure:4913: checking for --${enablestring:-enable}-protocol_file" >&5
no_cache=0
# Check whether --enable-protocol_file or --disable-protocol_file was given.
if test "${enable_protocol_file+set}" = set; then
- echo $ac_n "checking for --enable-threads""... $ac_c" 1>&6
-echo "configure:4884: checking for --enable-threads" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-threads""... $ac_c" 1>&6
+echo "configure:4956: checking for --${enablestring:-enable}-threads" >&5
no_cache=0
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
- echo $ac_n "checking for --enable-docview""... $ac_c" 1>&6
-echo "configure:4927: checking for --enable-docview" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-docview""... $ac_c" 1>&6
+echo "configure:5000: checking for --${enablestring:-enable}-docview" >&5
no_cache=0
# Check whether --enable-docview or --disable-docview was given.
if test "${enable_docview+set}" = set; then
fi
- echo $ac_n "checking for --enable-help""... $ac_c" 1>&6
-echo "configure:4966: checking for --enable-help" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-help""... $ac_c" 1>&6
+echo "configure:5040: checking for --${enablestring:-enable}-help" >&5
no_cache=0
# Check whether --enable-help or --disable-help was given.
if test "${enable_help+set}" = set; then
fi
- echo $ac_n "checking for --enable-mshtmlhelp""... $ac_c" 1>&6
-echo "configure:5005: checking for --enable-mshtmlhelp" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-mshtmlhelp""... $ac_c" 1>&6
+echo "configure:5080: checking for --${enablestring:-enable}-mshtmlhelp" >&5
no_cache=0
# Check whether --enable-mshtmlhelp or --disable-mshtmlhelp was given.
if test "${enable_mshtmlhelp+set}" = set; then
fi
- echo $ac_n "checking for --enable-html""... $ac_c" 1>&6
-echo "configure:5044: checking for --enable-html" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-html""... $ac_c" 1>&6
+echo "configure:5120: checking for --${enablestring:-enable}-html" >&5
no_cache=0
# Check whether --enable-html or --disable-html was given.
if test "${enable_html+set}" = set; then
fi
- echo $ac_n "checking for --enable-htmlhelp""... $ac_c" 1>&6
-echo "configure:5083: checking for --enable-htmlhelp" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-htmlhelp""... $ac_c" 1>&6
+echo "configure:5160: checking for --${enablestring:-enable}-htmlhelp" >&5
no_cache=0
# Check whether --enable-htmlhelp or --disable-htmlhelp was given.
if test "${enable_htmlhelp+set}" = set; then
fi
- echo $ac_n "checking for --enable-constraints""... $ac_c" 1>&6
-echo "configure:5122: checking for --enable-constraints" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-constraints""... $ac_c" 1>&6
+echo "configure:5200: checking for --${enablestring:-enable}-constraints" >&5
no_cache=0
# Check whether --enable-constraints or --disable-constraints was given.
if test "${enable_constraints+set}" = set; then
fi
- echo $ac_n "checking for --enable-printarch""... $ac_c" 1>&6
-echo "configure:5161: checking for --enable-printarch" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-printarch""... $ac_c" 1>&6
+echo "configure:5240: checking for --${enablestring:-enable}-printarch" >&5
no_cache=0
# Check whether --enable-printarch or --disable-printarch was given.
if test "${enable_printarch+set}" = set; then
fi
- echo $ac_n "checking for --enable-mdi""... $ac_c" 1>&6
-echo "configure:5200: checking for --enable-mdi" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-mdi""... $ac_c" 1>&6
+echo "configure:5280: checking for --${enablestring:-enable}-mdi" >&5
no_cache=0
# Check whether --enable-mdi or --disable-mdi was given.
if test "${enable_mdi+set}" = set; then
fi
- echo $ac_n "checking for --enable-loggui""... $ac_c" 1>&6
-echo "configure:5239: checking for --enable-loggui" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-loggui""... $ac_c" 1>&6
+echo "configure:5320: checking for --${enablestring:-enable}-loggui" >&5
no_cache=0
# Check whether --enable-loggui or --disable-loggui was given.
if test "${enable_loggui+set}" = set; then
fi
- echo $ac_n "checking for --enable-logwin""... $ac_c" 1>&6
-echo "configure:5278: checking for --enable-logwin" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-logwin""... $ac_c" 1>&6
+echo "configure:5360: checking for --${enablestring:-enable}-logwin" >&5
no_cache=0
# Check whether --enable-logwin or --disable-logwin was given.
if test "${enable_logwin+set}" = set; then
fi
- echo $ac_n "checking for --enable-logdialog""... $ac_c" 1>&6
-echo "configure:5317: checking for --enable-logdialog" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-logdialog""... $ac_c" 1>&6
+echo "configure:5400: checking for --${enablestring:-enable}-logdialog" >&5
no_cache=0
# Check whether --enable-logdialog or --disable-logdialog was given.
if test "${enable_logdialog+set}" = set; then
- echo $ac_n "checking for --enable-postscript""... $ac_c" 1>&6
-echo "configure:5357: checking for --enable-postscript" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-postscript""... $ac_c" 1>&6
+echo "configure:5441: checking for --${enablestring:-enable}-postscript" >&5
no_cache=0
# Check whether --enable-postscript or --disable-postscript was given.
if test "${enable_postscript+set}" = set; then
- echo $ac_n "checking for --enable-prologio""... $ac_c" 1>&6
-echo "configure:5399: checking for --enable-prologio" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-prologio""... $ac_c" 1>&6
+echo "configure:5484: checking for --${enablestring:-enable}-prologio" >&5
no_cache=0
# Check whether --enable-prologio or --disable-prologio was given.
if test "${enable_prologio+set}" = set; then
fi
- echo $ac_n "checking for --enable-resources""... $ac_c" 1>&6
-echo "configure:5438: checking for --enable-resources" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-resources""... $ac_c" 1>&6
+echo "configure:5524: checking for --${enablestring:-enable}-resources" >&5
no_cache=0
# Check whether --enable-resources or --disable-resources was given.
if test "${enable_resources+set}" = set; then
- echo $ac_n "checking for --enable-xresources""... $ac_c" 1>&6
-echo "configure:5478: checking for --enable-xresources" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-xresources""... $ac_c" 1>&6
+echo "configure:5565: checking for --${enablestring:-enable}-xresources" >&5
no_cache=0
# Check whether --enable-xresources or --disable-xresources was given.
if test "${enable_xresources+set}" = set; then
- echo $ac_n "checking for --enable-clipboard""... $ac_c" 1>&6
-echo "configure:5519: checking for --enable-clipboard" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-clipboard""... $ac_c" 1>&6
+echo "configure:5607: checking for --${enablestring:-enable}-clipboard" >&5
no_cache=0
# Check whether --enable-clipboard or --disable-clipboard was given.
if test "${enable_clipboard+set}" = set; then
fi
- echo $ac_n "checking for --enable-dnd""... $ac_c" 1>&6
-echo "configure:5558: checking for --enable-dnd" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-dnd""... $ac_c" 1>&6
+echo "configure:5647: checking for --${enablestring:-enable}-dnd" >&5
no_cache=0
# Check whether --enable-dnd or --disable-dnd was given.
if test "${enable_dnd+set}" = set; then
fi
- echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
-echo "configure:5597: checking for --enable-metafile" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-metafile""... $ac_c" 1>&6
+echo "configure:5687: checking for --${enablestring:-enable}-metafile" >&5
no_cache=0
# Check whether --enable-metafile or --disable-metafile was given.
if test "${enable_metafile+set}" = set; then
- echo $ac_n "checking for --enable-treelayout""... $ac_c" 1>&6
-echo "configure:5637: checking for --enable-treelayout" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-treelayout""... $ac_c" 1>&6
+echo "configure:5728: checking for --${enablestring:-enable}-treelayout" >&5
no_cache=0
# Check whether --enable-treelayout or --disable-treelayout was given.
if test "${enable_treelayout+set}" = set; then
- echo $ac_n "checking for --enable-controls""... $ac_c" 1>&6
-echo "configure:5678: checking for --enable-controls" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-controls""... $ac_c" 1>&6
+echo "configure:5770: checking for --${enablestring:-enable}-controls" >&5
no_cache=0
# Check whether --enable-controls or --disable-controls was given.
if test "${enable_controls+set}" = set; then
fi
- echo $ac_n "checking for --enable-accel""... $ac_c" 1>&6
-echo "configure:5798: checking for --enable-accel" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-accel""... $ac_c" 1>&6
+echo "configure:5891: checking for --${enablestring:-enable}-accel" >&5
no_cache=0
# Check whether --enable-accel or --disable-accel was given.
if test "${enable_accel+set}" = set; then
fi
- echo $ac_n "checking for --enable-button""... $ac_c" 1>&6
-echo "configure:5837: checking for --enable-button" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-button""... $ac_c" 1>&6
+echo "configure:5931: checking for --${enablestring:-enable}-button" >&5
no_cache=0
# Check whether --enable-button or --disable-button was given.
if test "${enable_button+set}" = set; then
fi
- echo $ac_n "checking for --enable-bmpbutton""... $ac_c" 1>&6
-echo "configure:5876: checking for --enable-bmpbutton" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-bmpbutton""... $ac_c" 1>&6
+echo "configure:5971: checking for --${enablestring:-enable}-bmpbutton" >&5
no_cache=0
# Check whether --enable-bmpbutton or --disable-bmpbutton was given.
if test "${enable_bmpbutton+set}" = set; then
fi
- echo $ac_n "checking for --enable-calendar""... $ac_c" 1>&6
-echo "configure:5915: checking for --enable-calendar" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-calendar""... $ac_c" 1>&6
+echo "configure:6011: checking for --${enablestring:-enable}-calendar" >&5
no_cache=0
# Check whether --enable-calendar or --disable-calendar was given.
if test "${enable_calendar+set}" = set; then
fi
- echo $ac_n "checking for --enable-caret""... $ac_c" 1>&6
-echo "configure:5954: checking for --enable-caret" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-caret""... $ac_c" 1>&6
+echo "configure:6051: checking for --${enablestring:-enable}-caret" >&5
no_cache=0
# Check whether --enable-caret or --disable-caret was given.
if test "${enable_caret+set}" = set; then
fi
- echo $ac_n "checking for --enable-checkbox""... $ac_c" 1>&6
-echo "configure:5993: checking for --enable-checkbox" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-checkbox""... $ac_c" 1>&6
+echo "configure:6091: checking for --${enablestring:-enable}-checkbox" >&5
no_cache=0
# Check whether --enable-checkbox or --disable-checkbox was given.
if test "${enable_checkbox+set}" = set; then
fi
- echo $ac_n "checking for --enable-checklst""... $ac_c" 1>&6
-echo "configure:6032: checking for --enable-checklst" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-checklst""... $ac_c" 1>&6
+echo "configure:6131: checking for --${enablestring:-enable}-checklst" >&5
no_cache=0
# Check whether --enable-checklst or --disable-checklst was given.
if test "${enable_checklst+set}" = set; then
fi
- echo $ac_n "checking for --enable-choice""... $ac_c" 1>&6
-echo "configure:6071: checking for --enable-choice" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-choice""... $ac_c" 1>&6
+echo "configure:6171: checking for --${enablestring:-enable}-choice" >&5
no_cache=0
# Check whether --enable-choice or --disable-choice was given.
if test "${enable_choice+set}" = set; then
fi
- echo $ac_n "checking for --enable-combobox""... $ac_c" 1>&6
-echo "configure:6110: checking for --enable-combobox" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-combobox""... $ac_c" 1>&6
+echo "configure:6211: checking for --${enablestring:-enable}-combobox" >&5
no_cache=0
# Check whether --enable-combobox or --disable-combobox was given.
if test "${enable_combobox+set}" = set; then
fi
- echo $ac_n "checking for --enable-gauge""... $ac_c" 1>&6
-echo "configure:6149: checking for --enable-gauge" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-gauge""... $ac_c" 1>&6
+echo "configure:6251: checking for --${enablestring:-enable}-gauge" >&5
no_cache=0
# Check whether --enable-gauge or --disable-gauge was given.
if test "${enable_gauge+set}" = set; then
fi
- echo $ac_n "checking for --enable-grid""... $ac_c" 1>&6
-echo "configure:6188: checking for --enable-grid" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-grid""... $ac_c" 1>&6
+echo "configure:6291: checking for --${enablestring:-enable}-grid" >&5
no_cache=0
# Check whether --enable-grid or --disable-grid was given.
if test "${enable_grid+set}" = set; then
fi
- echo $ac_n "checking for --enable-newgrid""... $ac_c" 1>&6
-echo "configure:6227: checking for --enable-newgrid" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-newgrid""... $ac_c" 1>&6
+echo "configure:6331: checking for --${enablestring:-enable}-newgrid" >&5
no_cache=0
# Check whether --enable-newgrid or --disable-newgrid was given.
if test "${enable_newgrid+set}" = set; then
fi
- echo $ac_n "checking for --enable-imaglist""... $ac_c" 1>&6
-echo "configure:6266: checking for --enable-imaglist" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-imaglist""... $ac_c" 1>&6
+echo "configure:6371: checking for --${enablestring:-enable}-imaglist" >&5
no_cache=0
# Check whether --enable-imaglist or --disable-imaglist was given.
if test "${enable_imaglist+set}" = set; then
fi
- echo $ac_n "checking for --enable-listbox""... $ac_c" 1>&6
-echo "configure:6305: checking for --enable-listbox" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-listbox""... $ac_c" 1>&6
+echo "configure:6411: checking for --${enablestring:-enable}-listbox" >&5
no_cache=0
# Check whether --enable-listbox or --disable-listbox was given.
if test "${enable_listbox+set}" = set; then
fi
- echo $ac_n "checking for --enable-listctrl""... $ac_c" 1>&6
-echo "configure:6344: checking for --enable-listctrl" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-listctrl""... $ac_c" 1>&6
+echo "configure:6451: checking for --${enablestring:-enable}-listctrl" >&5
no_cache=0
# Check whether --enable-listctrl or --disable-listctrl was given.
if test "${enable_listctrl+set}" = set; then
fi
- echo $ac_n "checking for --enable-notebook""... $ac_c" 1>&6
-echo "configure:6383: checking for --enable-notebook" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-notebook""... $ac_c" 1>&6
+echo "configure:6491: checking for --${enablestring:-enable}-notebook" >&5
no_cache=0
# Check whether --enable-notebook or --disable-notebook was given.
if test "${enable_notebook+set}" = set; then
fi
- echo $ac_n "checking for --enable-propsheet""... $ac_c" 1>&6
-echo "configure:6422: checking for --enable-propsheet" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-propsheet""... $ac_c" 1>&6
+echo "configure:6531: checking for --${enablestring:-enable}-propsheet" >&5
no_cache=0
# Check whether --enable-propsheet or --disable-propsheet was given.
if test "${enable_propsheet+set}" = set; then
fi
- echo $ac_n "checking for --enable-radiobox""... $ac_c" 1>&6
-echo "configure:6461: checking for --enable-radiobox" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-radiobox""... $ac_c" 1>&6
+echo "configure:6571: checking for --${enablestring:-enable}-radiobox" >&5
no_cache=0
# Check whether --enable-radiobox or --disable-radiobox was given.
if test "${enable_radiobox+set}" = set; then
fi
- echo $ac_n "checking for --enable-radiobtn""... $ac_c" 1>&6
-echo "configure:6500: checking for --enable-radiobtn" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-radiobtn""... $ac_c" 1>&6
+echo "configure:6611: checking for --${enablestring:-enable}-radiobtn" >&5
no_cache=0
# Check whether --enable-radiobtn or --disable-radiobtn was given.
if test "${enable_radiobtn+set}" = set; then
fi
- echo $ac_n "checking for --enable-sash""... $ac_c" 1>&6
-echo "configure:6539: checking for --enable-sash" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-sash""... $ac_c" 1>&6
+echo "configure:6651: checking for --${enablestring:-enable}-sash" >&5
no_cache=0
# Check whether --enable-sash or --disable-sash was given.
if test "${enable_sash+set}" = set; then
fi
- echo $ac_n "checking for --enable-scrollbar""... $ac_c" 1>&6
-echo "configure:6578: checking for --enable-scrollbar" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-scrollbar""... $ac_c" 1>&6
+echo "configure:6691: checking for --${enablestring:-enable}-scrollbar" >&5
no_cache=0
# Check whether --enable-scrollbar or --disable-scrollbar was given.
if test "${enable_scrollbar+set}" = set; then
fi
- echo $ac_n "checking for --enable-slider""... $ac_c" 1>&6
-echo "configure:6617: checking for --enable-slider" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-slider""... $ac_c" 1>&6
+echo "configure:6731: checking for --${enablestring:-enable}-slider" >&5
no_cache=0
# Check whether --enable-slider or --disable-slider was given.
if test "${enable_slider+set}" = set; then
fi
- echo $ac_n "checking for --enable-spinbtn""... $ac_c" 1>&6
-echo "configure:6656: checking for --enable-spinbtn" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-spinbtn""... $ac_c" 1>&6
+echo "configure:6771: checking for --${enablestring:-enable}-spinbtn" >&5
no_cache=0
# Check whether --enable-spinbtn or --disable-spinbtn was given.
if test "${enable_spinbtn+set}" = set; then
fi
- echo $ac_n "checking for --enable-spinctrl""... $ac_c" 1>&6
-echo "configure:6695: checking for --enable-spinctrl" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-spinctrl""... $ac_c" 1>&6
+echo "configure:6811: checking for --${enablestring:-enable}-spinctrl" >&5
no_cache=0
# Check whether --enable-spinctrl or --disable-spinctrl was given.
if test "${enable_spinctrl+set}" = set; then
fi
- echo $ac_n "checking for --enable-splitter""... $ac_c" 1>&6
-echo "configure:6734: checking for --enable-splitter" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-splitter""... $ac_c" 1>&6
+echo "configure:6851: checking for --${enablestring:-enable}-splitter" >&5
no_cache=0
# Check whether --enable-splitter or --disable-splitter was given.
if test "${enable_splitter+set}" = set; then
fi
- echo $ac_n "checking for --enable-statbmp""... $ac_c" 1>&6
-echo "configure:6773: checking for --enable-statbmp" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-statbmp""... $ac_c" 1>&6
+echo "configure:6891: checking for --${enablestring:-enable}-statbmp" >&5
no_cache=0
# Check whether --enable-statbmp or --disable-statbmp was given.
if test "${enable_statbmp+set}" = set; then
fi
- echo $ac_n "checking for --enable-statbox""... $ac_c" 1>&6
-echo "configure:6812: checking for --enable-statbox" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-statbox""... $ac_c" 1>&6
+echo "configure:6931: checking for --${enablestring:-enable}-statbox" >&5
no_cache=0
# Check whether --enable-statbox or --disable-statbox was given.
if test "${enable_statbox+set}" = set; then
fi
- echo $ac_n "checking for --enable-statline""... $ac_c" 1>&6
-echo "configure:6851: checking for --enable-statline" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-statline""... $ac_c" 1>&6
+echo "configure:6971: checking for --${enablestring:-enable}-statline" >&5
no_cache=0
# Check whether --enable-statline or --disable-statline was given.
if test "${enable_statline+set}" = set; then
fi
- echo $ac_n "checking for --enable-stattext""... $ac_c" 1>&6
-echo "configure:6890: checking for --enable-stattext" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-stattext""... $ac_c" 1>&6
+echo "configure:7011: checking for --${enablestring:-enable}-stattext" >&5
no_cache=0
# Check whether --enable-stattext or --disable-stattext was given.
if test "${enable_stattext+set}" = set; then
fi
- echo $ac_n "checking for --enable-statusbar""... $ac_c" 1>&6
-echo "configure:6929: checking for --enable-statusbar" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-statusbar""... $ac_c" 1>&6
+echo "configure:7051: checking for --${enablestring:-enable}-statusbar" >&5
no_cache=0
# Check whether --enable-statusbar or --disable-statusbar was given.
if test "${enable_statusbar+set}" = set; then
fi
- echo $ac_n "checking for --enable-tabdialog""... $ac_c" 1>&6
-echo "configure:6968: checking for --enable-tabdialog" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-tabdialog""... $ac_c" 1>&6
+echo "configure:7091: checking for --${enablestring:-enable}-tabdialog" >&5
no_cache=0
# Check whether --enable-tabdialog or --disable-tabdialog was given.
if test "${enable_tabdialog+set}" = set; then
fi
- echo $ac_n "checking for --enable-textctrl""... $ac_c" 1>&6
-echo "configure:7007: checking for --enable-textctrl" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-textctrl""... $ac_c" 1>&6
+echo "configure:7131: checking for --${enablestring:-enable}-textctrl" >&5
no_cache=0
# Check whether --enable-textctrl or --disable-textctrl was given.
if test "${enable_textctrl+set}" = set; then
fi
- echo $ac_n "checking for --enable-togglebtn""... $ac_c" 1>&6
-echo "configure:7046: checking for --enable-togglebtn" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-togglebtn""... $ac_c" 1>&6
+echo "configure:7171: checking for --${enablestring:-enable}-togglebtn" >&5
no_cache=0
# Check whether --enable-togglebtn or --disable-togglebtn was given.
if test "${enable_togglebtn+set}" = set; then
fi
- echo $ac_n "checking for --enable-toolbar""... $ac_c" 1>&6
-echo "configure:7085: checking for --enable-toolbar" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-toolbar""... $ac_c" 1>&6
+echo "configure:7211: checking for --${enablestring:-enable}-toolbar" >&5
no_cache=0
# Check whether --enable-toolbar or --disable-toolbar was given.
if test "${enable_toolbar+set}" = set; then
fi
- echo $ac_n "checking for --enable-tbarnative""... $ac_c" 1>&6
-echo "configure:7124: checking for --enable-tbarnative" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-tbarnative""... $ac_c" 1>&6
+echo "configure:7251: checking for --${enablestring:-enable}-tbarnative" >&5
no_cache=0
# Check whether --enable-tbarnative or --disable-tbarnative was given.
if test "${enable_tbarnative+set}" = set; then
fi
- echo $ac_n "checking for --enable-tbarsmpl""... $ac_c" 1>&6
-echo "configure:7163: checking for --enable-tbarsmpl" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-tbarsmpl""... $ac_c" 1>&6
+echo "configure:7291: checking for --${enablestring:-enable}-tbarsmpl" >&5
no_cache=0
# Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
if test "${enable_tbarsmpl+set}" = set; then
fi
- echo $ac_n "checking for --enable-treectrl""... $ac_c" 1>&6
-echo "configure:7202: checking for --enable-treectrl" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-treectrl""... $ac_c" 1>&6
+echo "configure:7331: checking for --${enablestring:-enable}-treectrl" >&5
no_cache=0
# Check whether --enable-treectrl or --disable-treectrl was given.
if test "${enable_treectrl+set}" = set; then
fi
- echo $ac_n "checking for --enable-tipwindow""... $ac_c" 1>&6
-echo "configure:7241: checking for --enable-tipwindow" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-tipwindow""... $ac_c" 1>&6
+echo "configure:7371: checking for --${enablestring:-enable}-tipwindow" >&5
no_cache=0
# Check whether --enable-tipwindow or --disable-tipwindow was given.
if test "${enable_tipwindow+set}" = set; then
fi
- echo $ac_n "checking for --enable-popupwin""... $ac_c" 1>&6
-echo "configure:7280: checking for --enable-popupwin" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-popupwin""... $ac_c" 1>&6
+echo "configure:7411: checking for --${enablestring:-enable}-popupwin" >&5
no_cache=0
# Check whether --enable-popupwin or --disable-popupwin was given.
if test "${enable_popupwin+set}" = set; then
- echo $ac_n "checking for --enable-commondlg""... $ac_c" 1>&6
-echo "configure:7321: checking for --enable-commondlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-commondlg""... $ac_c" 1>&6
+echo "configure:7453: checking for --${enablestring:-enable}-commondlg" >&5
no_cache=0
# Check whether --enable-commondlg or --disable-commondlg was given.
if test "${enable_commondlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-choicedlg""... $ac_c" 1>&6
-echo "configure:7360: checking for --enable-choicedlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-choicedlg""... $ac_c" 1>&6
+echo "configure:7493: checking for --${enablestring:-enable}-choicedlg" >&5
no_cache=0
# Check whether --enable-choicedlg or --disable-choicedlg was given.
if test "${enable_choicedlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-coldlg""... $ac_c" 1>&6
-echo "configure:7399: checking for --enable-coldlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-coldlg""... $ac_c" 1>&6
+echo "configure:7533: checking for --${enablestring:-enable}-coldlg" >&5
no_cache=0
# Check whether --enable-coldlg or --disable-coldlg was given.
if test "${enable_coldlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-filedlg""... $ac_c" 1>&6
-echo "configure:7438: checking for --enable-filedlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-filedlg""... $ac_c" 1>&6
+echo "configure:7573: checking for --${enablestring:-enable}-filedlg" >&5
no_cache=0
# Check whether --enable-filedlg or --disable-filedlg was given.
if test "${enable_filedlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-finddlg""... $ac_c" 1>&6
-echo "configure:7477: checking for --enable-finddlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-finddlg""... $ac_c" 1>&6
+echo "configure:7613: checking for --${enablestring:-enable}-finddlg" >&5
no_cache=0
# Check whether --enable-finddlg or --disable-finddlg was given.
if test "${enable_finddlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-fontdlg""... $ac_c" 1>&6
-echo "configure:7516: checking for --enable-fontdlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-fontdlg""... $ac_c" 1>&6
+echo "configure:7653: checking for --${enablestring:-enable}-fontdlg" >&5
no_cache=0
# Check whether --enable-fontdlg or --disable-fontdlg was given.
if test "${enable_fontdlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-dirdlg""... $ac_c" 1>&6
-echo "configure:7555: checking for --enable-dirdlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-dirdlg""... $ac_c" 1>&6
+echo "configure:7693: checking for --${enablestring:-enable}-dirdlg" >&5
no_cache=0
# Check whether --enable-dirdlg or --disable-dirdlg was given.
if test "${enable_dirdlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-msgdlg""... $ac_c" 1>&6
-echo "configure:7594: checking for --enable-msgdlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-msgdlg""... $ac_c" 1>&6
+echo "configure:7733: checking for --${enablestring:-enable}-msgdlg" >&5
no_cache=0
# Check whether --enable-msgdlg or --disable-msgdlg was given.
if test "${enable_msgdlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-numberdlg""... $ac_c" 1>&6
-echo "configure:7633: checking for --enable-numberdlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-numberdlg""... $ac_c" 1>&6
+echo "configure:7773: checking for --${enablestring:-enable}-numberdlg" >&5
no_cache=0
# Check whether --enable-numberdlg or --disable-numberdlg was given.
if test "${enable_numberdlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-splash""... $ac_c" 1>&6
-echo "configure:7672: checking for --enable-splash" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-splash""... $ac_c" 1>&6
+echo "configure:7813: checking for --${enablestring:-enable}-splash" >&5
no_cache=0
# Check whether --enable-splash or --disable-splash was given.
if test "${enable_splash+set}" = set; then
fi
- echo $ac_n "checking for --enable-textdlg""... $ac_c" 1>&6
-echo "configure:7711: checking for --enable-textdlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-textdlg""... $ac_c" 1>&6
+echo "configure:7853: checking for --${enablestring:-enable}-textdlg" >&5
no_cache=0
# Check whether --enable-textdlg or --disable-textdlg was given.
if test "${enable_textdlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-tipdlg""... $ac_c" 1>&6
-echo "configure:7750: checking for --enable-tipdlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-tipdlg""... $ac_c" 1>&6
+echo "configure:7893: checking for --${enablestring:-enable}-tipdlg" >&5
no_cache=0
# Check whether --enable-tipdlg or --disable-tipdlg was given.
if test "${enable_tipdlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-progressdlg""... $ac_c" 1>&6
-echo "configure:7789: checking for --enable-progressdlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-progressdlg""... $ac_c" 1>&6
+echo "configure:7933: checking for --${enablestring:-enable}-progressdlg" >&5
no_cache=0
# Check whether --enable-progressdlg or --disable-progressdlg was given.
if test "${enable_progressdlg+set}" = set; then
fi
- echo $ac_n "checking for --enable-wizarddlg""... $ac_c" 1>&6
-echo "configure:7828: checking for --enable-wizarddlg" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-wizarddlg""... $ac_c" 1>&6
+echo "configure:7973: checking for --${enablestring:-enable}-wizarddlg" >&5
no_cache=0
# Check whether --enable-wizarddlg or --disable-wizarddlg was given.
if test "${enable_wizarddlg+set}" = set; then
- echo $ac_n "checking for --enable-menus""... $ac_c" 1>&6
-echo "configure:7869: checking for --enable-menus" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-menus""... $ac_c" 1>&6
+echo "configure:8015: checking for --${enablestring:-enable}-menus" >&5
no_cache=0
# Check whether --enable-menus or --disable-menus was given.
if test "${enable_menus+set}" = set; then
fi
- echo $ac_n "checking for --enable-miniframe""... $ac_c" 1>&6
-echo "configure:7908: checking for --enable-miniframe" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-miniframe""... $ac_c" 1>&6
+echo "configure:8055: checking for --${enablestring:-enable}-miniframe" >&5
no_cache=0
# Check whether --enable-miniframe or --disable-miniframe was given.
if test "${enable_miniframe+set}" = set; then
fi
- echo $ac_n "checking for --enable-tooltips""... $ac_c" 1>&6
-echo "configure:7947: checking for --enable-tooltips" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-tooltips""... $ac_c" 1>&6
+echo "configure:8095: checking for --${enablestring:-enable}-tooltips" >&5
no_cache=0
# Check whether --enable-tooltips or --disable-tooltips was given.
if test "${enable_tooltips+set}" = set; then
fi
- echo $ac_n "checking for --enable-splines""... $ac_c" 1>&6
-echo "configure:7986: checking for --enable-splines" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-splines""... $ac_c" 1>&6
+echo "configure:8135: checking for --${enablestring:-enable}-splines" >&5
no_cache=0
# Check whether --enable-splines or --disable-splines was given.
if test "${enable_splines+set}" = set; then
fi
- echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6
-echo "configure:8025: checking for --enable-validators" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-validators""... $ac_c" 1>&6
+echo "configure:8175: checking for --${enablestring:-enable}-validators" >&5
no_cache=0
# Check whether --enable-validators or --disable-validators was given.
if test "${enable_validators+set}" = set; then
fi
- echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6
-echo "configure:8064: checking for --enable-busyinfo" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-busyinfo""... $ac_c" 1>&6
+echo "configure:8215: checking for --${enablestring:-enable}-busyinfo" >&5
no_cache=0
# Check whether --enable-busyinfo or --disable-busyinfo was given.
if test "${enable_busyinfo+set}" = set; then
fi
- echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6
-echo "configure:8103: checking for --enable-joystick" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-joystick""... $ac_c" 1>&6
+echo "configure:8255: checking for --${enablestring:-enable}-joystick" >&5
no_cache=0
# Check whether --enable-joystick or --disable-joystick was given.
if test "${enable_joystick+set}" = set; then
fi
- echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
-echo "configure:8142: checking for --enable-metafile" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-metafile""... $ac_c" 1>&6
+echo "configure:8295: checking for --${enablestring:-enable}-metafile" >&5
no_cache=0
# Check whether --enable-metafile or --disable-metafile was given.
if test "${enable_metafile+set}" = set; then
fi
- echo $ac_n "checking for --enable-dragimage""... $ac_c" 1>&6
-echo "configure:8181: checking for --enable-dragimage" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-dragimage""... $ac_c" 1>&6
+echo "configure:8335: checking for --${enablestring:-enable}-dragimage" >&5
no_cache=0
# Check whether --enable-dragimage or --disable-dragimage was given.
if test "${enable_dragimage+set}" = set; then
- echo $ac_n "checking for --enable-palette""... $ac_c" 1>&6
-echo "configure:8222: checking for --enable-palette" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-palette""... $ac_c" 1>&6
+echo "configure:8377: checking for --${enablestring:-enable}-palette" >&5
no_cache=0
# Check whether --enable-palette or --disable-palette was given.
if test "${enable_palette+set}" = set; then
fi
- echo $ac_n "checking for --enable-image""... $ac_c" 1>&6
-echo "configure:8261: checking for --enable-image" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-image""... $ac_c" 1>&6
+echo "configure:8417: checking for --${enablestring:-enable}-image" >&5
no_cache=0
# Check whether --enable-image or --disable-image was given.
if test "${enable_image+set}" = set; then
fi
- echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6
-echo "configure:8300: checking for --enable-gif" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-gif""... $ac_c" 1>&6
+echo "configure:8457: checking for --${enablestring:-enable}-gif" >&5
no_cache=0
# Check whether --enable-gif or --disable-gif was given.
if test "${enable_gif+set}" = set; then
fi
- echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6
-echo "configure:8339: checking for --enable-pcx" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-pcx""... $ac_c" 1>&6
+echo "configure:8497: checking for --${enablestring:-enable}-pcx" >&5
no_cache=0
# Check whether --enable-pcx or --disable-pcx was given.
if test "${enable_pcx+set}" = set; then
fi
- echo $ac_n "checking for --enable-iff""... $ac_c" 1>&6
-echo "configure:8378: checking for --enable-iff" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-iff""... $ac_c" 1>&6
+echo "configure:8537: checking for --${enablestring:-enable}-iff" >&5
no_cache=0
# Check whether --enable-iff or --disable-iff was given.
if test "${enable_iff+set}" = set; then
fi
- echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
-echo "configure:8417: checking for --enable-pnm" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-pnm""... $ac_c" 1>&6
+echo "configure:8577: checking for --${enablestring:-enable}-pnm" >&5
no_cache=0
# Check whether --enable-pnm or --disable-pnm was given.
if test "${enable_pnm+set}" = set; then
fi
- echo $ac_n "checking for --enable-xpm""... $ac_c" 1>&6
-echo "configure:8456: checking for --enable-xpm" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-xpm""... $ac_c" 1>&6
+echo "configure:8617: checking for --${enablestring:-enable}-xpm" >&5
no_cache=0
# Check whether --enable-xpm or --disable-xpm was given.
if test "${enable_xpm+set}" = set; then
fi
- echo $ac_n "checking for --enable-ico_cur""... $ac_c" 1>&6
-echo "configure:8495: checking for --enable-ico_cur" >&5
+ enablestring=
+ echo $ac_n "checking for --${enablestring:-enable}-ico_cur""... $ac_c" 1>&6
+echo "configure:8657: checking for --${enablestring:-enable}-ico_cur" >&5
no_cache=0
# Check whether --enable-ico_cur or --disable-ico_cur was given.
if test "${enable_ico_cur+set}" = set; then
echo $ac_n "checking for toolkit""... $ac_c" 1>&6
-echo "configure:8554: checking for toolkit" >&5
+echo "configure:8716: checking for toolkit" >&5
if test "$wxUSE_GUI" = "yes"; then
echo "$ac_t""base ($host_alias hosted) only" 1>&6
fi
-case "${host}" in
- *-pc-os2_emx | *-pc-os2-emx )
- LIBS="$LIBS -lstdcpp"
- if test "$wxUSE_MOTIF" = 1 -o "$wxUSE_GTK" = 1 -o "$wxUSE_X11" = 1; then
- echo $ac_n "checking for drand48 in -lcExt""... $ac_c" 1>&6
-echo "configure:8621: checking for drand48 in -lcExt" >&5
-ac_lib_var=`echo cExt'_'drand48 | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lcExt $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 8629 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char drand48();
-
-int main() {
-drand48()
-; return 0; }
-EOF
-if { (eval echo configure:8640: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LIBS="$LIBS -lcExt"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- else
- RESPROGRAMOBJ="\${top_srcdir}/include/wx/os2/wx.res"
- fi
- ;;
-esac
-
wants_win32=0
doesnt_want_win32=0
case "${host}" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8791: checking for $ac_word" >&5
+echo "configure:8903: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8821: checking for $ac_word" >&5
+echo "configure:8933: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8872: checking for $ac_word" >&5
+echo "configure:8984: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:8904: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:9016: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 8915 "configure"
+#line 9027 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:8920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:8946: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:9058: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:8951: checking whether we are using GNU C" >&5
+echo "configure:9063: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8960: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:9072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:8979: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:9091: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:9012: checking how to run the C preprocessor" >&5
+echo "configure:9124: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 9027 "configure"
+#line 9139 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9033: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9145: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 9044 "configure"
+#line 9156 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9050: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9162: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 9061 "configure"
+#line 9173 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9067: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9179: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:9093: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:9205: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
-#line 9099 "configure"
+#line 9211 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
-#line 9117 "configure"
+#line 9229 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9154: checking for $ac_word" >&5
+echo "configure:9266: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:9186: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:9298: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 9197 "configure"
+#line 9309 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
-if { (eval echo configure:9202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:9228: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:9340: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:9233: checking whether we are using GNU C++" >&5
+echo "configure:9345: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9354: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:9261: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:9373: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9304: checking for $ac_word" >&5
+echo "configure:9416: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9335: checking for $ac_word" >&5
+echo "configure:9447: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:9375: checking for a BSD compatible install" >&5
+echo "configure:9487: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9449: checking for $ac_word" >&5
+echo "configure:9561: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking if make is GNU make""... $ac_c" 1>&6
-echo "configure:9478: checking if make is GNU make" >&5
+echo "configure:9590: checking if make is GNU make" >&5
if eval "test \"`echo '$''{'wx_cv_prog_makeisgnu'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$wx_cv_prog_makeisgnu" != "xyes"; then
echo $ac_n "checking if make supports VPATH""... $ac_c" 1>&6
-echo "configure:9504: checking if make supports VPATH" >&5
+echo "configure:9616: checking if make supports VPATH" >&5
if eval "test \"`echo '$''{'wx_cv_prog_makevpath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9551: checking for $ac_word" >&5
+echo "configure:9663: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:9585: checking for $ac_word" >&5
+echo "configure:9697: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:9619: checking for yywrap in -l$ac_lib" >&5
+echo "configure:9731: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 9627 "configure"
+#line 9739 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:9638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9750: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:9662: checking whether ln -s works" >&5
+echo "configure:9774: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ LIBS="$LIBS -lstdcpp"
+ if test "$wxUSE_MOTIF" = 1 -o "$wxUSE_GTK" = 1 -o "$wxUSE_X11" = 1; then
+ echo $ac_n "checking for drand48 in -lcExt""... $ac_c" 1>&6
+echo "configure:9800: checking for drand48 in -lcExt" >&5
+ac_lib_var=`echo cExt'_'drand48 | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcExt $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 9808 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char drand48();
+
+int main() {
+drand48()
+; return 0; }
+EOF
+if { (eval echo configure:9819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lcExt"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ RESPROGRAMOBJ="\${top_srcdir}/include/wx/os2/wx.res"
+ fi
+ ;;
+esac
+
if test "$wxUSE_MAC" != 1; then
for ac_hdr in strings.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9689: checking for $ac_hdr" >&5
+echo "configure:9851: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9694 "configure"
+#line 9856 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9861: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9731: checking for $ac_hdr" >&5
+echo "configure:9893: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9736 "configure"
+#line 9898 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9771: checking for $ac_hdr" >&5
+echo "configure:9933: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9776 "configure"
+#line 9938 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9781: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9943: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9811: checking for $ac_hdr" >&5
+echo "configure:9973: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9816 "configure"
+#line 9978 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9821: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9983: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9851: checking for $ac_hdr" >&5
+echo "configure:10013: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9856 "configure"
+#line 10018 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9861: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10023: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9893: checking for $ac_hdr" >&5
+echo "configure:10055: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9898 "configure"
+#line 10060 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10065: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9935: checking for $ac_hdr" >&5
+echo "configure:10097: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9940 "configure"
+#line 10102 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9945: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in fnmatch
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:9976: checking for $ac_func" >&5
+echo "configure:10138: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9981 "configure"
+#line 10143 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10034: checking for $ac_hdr" >&5
+echo "configure:10196: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10039 "configure"
+#line 10201 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10044: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10206: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10077: checking for $ac_hdr" >&5
+echo "configure:10239: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10082 "configure"
+#line 10244 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10249: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:10118: checking for working const" >&5
+echo "configure:10280: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10123 "configure"
+#line 10285 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:10172: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10334: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:10193: checking for inline" >&5
+echo "configure:10355: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 10200 "configure"
+#line 10362 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:10207: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10369: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:10234: checking size of char" >&5
+echo "configure:10396: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_char=1
else
cat > conftest.$ac_ext <<EOF
-#line 10242 "configure"
+#line 10404 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10253: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10416: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_char=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:10273: checking size of short" >&5
+echo "configure:10436: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_short=2
else
cat > conftest.$ac_ext <<EOF
-#line 10281 "configure"
+#line 10444 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:10312: checking size of void *" >&5
+echo "configure:10476: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_void_p=4
else
cat > conftest.$ac_ext <<EOF
-#line 10320 "configure"
+#line 10484 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_void_p=`cat conftestval`
else
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:10351: checking size of int" >&5
+echo "configure:10516: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_int=4
else
cat > conftest.$ac_ext <<EOF
-#line 10359 "configure"
+#line 10524 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:10390: checking size of long" >&5
+echo "configure:10556: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 10398 "configure"
+#line 10564 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
case "${host}" in
arm-*-linux* )
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:10432: checking size of long long" >&5
+echo "configure:10599: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 10440 "configure"
+#line 10607 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+#include <sys/types.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(long long));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_long_long=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_long_long=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+EOF
+
+
+ ;;
+ *-hp-hpux* )
+ echo $ac_n "checking size of long long""... $ac_c" 1>&6
+echo "configure:10641: checking size of long long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_long_long=0
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10649 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
EOF
+ if test "$ac_cv_sizeof_long_long" != "0"; then
+ CPPFLAGS="$CPPFLAGS -D_INCLUDE_LONGLONG"
+ fi
;;
* )
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:10473: checking size of long long" >&5
+echo "configure:10686: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=0
else
cat > conftest.$ac_ext <<EOF
-#line 10481 "configure"
+#line 10694 "configure"
#include "confdefs.h"
#include <stdio.h>
+#include <sys/types.h>
main()
{
FILE *f=fopen("conftestval", "w");
exit(0);
}
EOF
-if { (eval echo configure:10492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
esac
echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6
-echo "configure:10514: checking size of wchar_t" >&5
+echo "configure:10728: checking size of wchar_t" >&5
if eval "test \"`echo '$''{'wx_cv_sizeof_wchar_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
- wx_cv_sizeof_wchar_t=4
+
+ case "${host}" in
+ *-pc-msdosdjgpp )
+ wx_cv_sizeof_wchar_t=0
+ ;;
+ * )
+ wx_cv_sizeof_wchar_t=4
+ ;;
+ esac
+
else
cat > conftest.$ac_ext <<EOF
-#line 10524 "configure"
+#line 10747 "configure"
#include "confdefs.h"
+ /* DJGPP only has fake wchar_t: */
+ #ifdef __DJGPP__
+ # error "fake wchar_t"
+ #endif
#ifdef HAVE_WCHAR_H
# ifdef __CYGWIN__
# include <stddef.h>
}
EOF
-if { (eval echo configure:10546: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
wx_cv_sizeof_wchar_t=`cat conftestval`
else
wx_largefile=no
echo $ac_n "checking for _FILE_OFFSET_BITS value needed for large files""... $ac_c" 1>&6
-echo "configure:10578: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+echo "configure:10805: checking for _FILE_OFFSET_BITS value needed for large files" >&5
if eval "test \"`echo '$''{'ac_cv_sys_file_offset_bits'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10584 "configure"
+#line 10811 "configure"
#include "confdefs.h"
#define _FILE_OFFSET_BITS 64
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:10595: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10822: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sys_file_offset_bits=64
else
if test "x$wx_largefile" != "xyes"; then
echo $ac_n "checking for _LARGE_FILES value needed for large files""... $ac_c" 1>&6
-echo "configure:10622: checking for _LARGE_FILES value needed for large files" >&5
+echo "configure:10849: checking for _LARGE_FILES value needed for large files" >&5
if eval "test \"`echo '$''{'ac_cv_sys_large_files'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10628 "configure"
+#line 10855 "configure"
#include "confdefs.h"
#define _LARGE_FILES 1
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:10639: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10866: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sys_large_files=1
else
fi
echo $ac_n "checking if large file support is available""... $ac_c" 1>&6
-echo "configure:10666: checking if large file support is available" >&5
+echo "configure:10893: checking if large file support is available" >&5
if test "x$wx_largefile" = "xyes"; then
cat >> confdefs.h <<\EOF
#define HAVE_LARGEFILE_SUPPORT 1
if test "x$wx_largefile" = "xyes"; then
- if test "x$ac_cv_sys_file_offset_bits" = "xyes"; then
- CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=64"
+ if test "x$ac_cv_sys_file_offset_bits" = "x64"; then
+ WX_LARGEFILE_FLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGE_FILES"
else
- CPPFLAGS="$CPPFLAGS -D_LARGE_FILES"
+ WX_LARGEFILE_FLAGS="-D_LARGE_FILES"
fi
+ CPPFLAGS="$CPPFLAGS $WX_LARGEFILE_FLAGS"
fi
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:10686: checking whether byte ordering is bigendian" >&5
+echo "configure:10914: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 10693 "configure"
+#line 10921 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:10704: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10932: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 10708 "configure"
+#line 10936 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:10719: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10947: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
ac_cv_c_bigendian=unknown
else
cat > conftest.$ac_ext <<EOF
-#line 10739 "configure"
+#line 10967 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:10752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:10980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:10780: checking how to run the C++ preprocessor" >&5
+echo "configure:11008: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 10793 "configure"
+#line 11021 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10798: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10842: checking for $ac_hdr" >&5
+echo "configure:11070: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10847 "configure"
+#line 11075 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11080: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if C++ compiler supports bool""... $ac_c" 1>&6
-echo "configure:10900: checking if C++ compiler supports bool" >&5
+echo "configure:11128: checking if C++ compiler supports bool" >&5
if eval "test \"`echo '$''{'wx_cv_cpp_bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10915 "configure"
+#line 11143 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:10927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_cpp_bool=yes
echo $ac_n "checking if C++ compiler supports the explicit keyword""... $ac_c" 1>&6
-echo "configure:10965: checking if C++ compiler supports the explicit keyword" >&5
+echo "configure:11193: checking if C++ compiler supports the explicit keyword" >&5
if eval "test \"`echo '$''{'wx_cv_explicit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 10980 "configure"
+#line 11208 "configure"
#include "confdefs.h"
class Foo { public: explicit Foo(int) {} };
; return 0; }
EOF
-if { (eval echo configure:10991: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11219: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 10995 "configure"
+#line 11223 "configure"
#include "confdefs.h"
class Foo { public: explicit Foo(int) {} };
; return 0; }
EOF
-if { (eval echo configure:11008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11236: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_explicit=no
else
/usr/local/x11r5/include \
/usr/lpp/Xamples/include \
\
- /usr/openwin/share/include \
- /usr/include"
+ /usr/openwin/share/include"
SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` "
if test "$USE_LINUX" = 1; then
echo $ac_n "checking for glibc 2.1 or later""... $ac_c" 1>&6
-echo "configure:11169: checking for glibc 2.1 or later" >&5
+echo "configure:11396: checking for glibc 2.1 or later" >&5
if eval "test \"`echo '$''{'wx_cv_lib_glibc21'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11175 "configure"
+#line 11402 "configure"
#include "confdefs.h"
#include <features.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:11186: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11413: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_lib_glibc21=yes
if test "$wxUSE_REGEX" = "sys" -o "$wxUSE_REGEX" = "yes" ; then
ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for regex.h""... $ac_c" 1>&6
-echo "configure:11234: checking for regex.h" >&5
+echo "configure:11461: checking for regex.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11239 "configure"
+#line 11466 "configure"
#include "confdefs.h"
#include <regex.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11244: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11471: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in regcomp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:11263: checking for $ac_func" >&5
+echo "configure:11490: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11268 "configure"
+#line 11495 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:11291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$wxUSE_ZLIB" = "sys" -o "$wxUSE_ZLIB" = "yes" ; then
- ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'`
+ if test "$USE_DARWIN" = 1; then
+ system_zlib_h_ok="yes"
+ else
+ echo $ac_n "checking for zlib.h >= 1.1.4""... $ac_c" 1>&6
+echo "configure:11578: checking for zlib.h >= 1.1.4" >&5
+if eval "test \"`echo '$''{'ac_cv_header_zlib_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for zlib.h""... $ac_c" 1>&6
-echo "configure:11349: checking for zlib.h" >&5
+echo "configure:11585: checking for zlib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11354 "configure"
+#line 11590 "configure"
#include "confdefs.h"
#include <zlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11595: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:11376: checking for deflate in -lz" >&5
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+else
+ cat > conftest.$ac_ext <<EOF
+#line 11619 "configure"
+#include "confdefs.h"
+
+ #include <zlib.h>
+ #include <stdio.h>
+
+
+ int main()
+ {
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%s",
+ ZLIB_VERSION[0] == '1' &&
+ (ZLIB_VERSION[2] > '1' ||
+ (ZLIB_VERSION[2] == '1' &&
+ ZLIB_VERSION[4] >= '4')) ? "yes" : "no");
+ exit(0);
+ }
+
+
+EOF
+if { (eval echo configure:11640: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_header_zlib_h=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_zlib_h=no
+fi
+rm -fr conftest*
+fi
+
+
+fi
+
+echo "$ac_t""$ac_cv_header_zlib_h" 1>&6
+
+ system_zlib_h_ok=$ac_cv_header_zlib_h
+ fi
+
+ if test "$system_zlib_h_ok" = "yes"; then
+ echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
+echo "configure:11662: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11384 "configure"
+#line 11670 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:11395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11681: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
+ fi
if test "x$ZLIB_LINK" = "x" ; then
if test "$wxUSE_ZLIB" = "sys" ; then
- { echo "configure: error: system zlib compression library not found! Use --with-zlib=builtin to use built-in version" 1>&2; exit 1; }
+ { echo "configure: error: zlib library not found or too old! Use --with-zlib=builtin to use built-in version" 1>&2; exit 1; }
else
- echo "configure: warning: system zlib compression library not found, will use built-in instead" 1>&2
+ echo "configure: warning: zlib library not found or too old, will use built-in instead" 1>&2
wxUSE_ZLIB=builtin
fi
else
if test "$wxUSE_MGL" != 1 ; then
if test "$wxUSE_LIBPNG" = "sys" -o "$wxUSE_LIBPNG" = "yes" ; then
- ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
+ echo $ac_n "checking for png.h > 0.90""... $ac_c" 1>&6
+echo "configure:11742: checking for png.h > 0.90" >&5
+if eval "test \"`echo '$''{'ac_cv_header_png_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for png.h""... $ac_c" 1>&6
-echo "configure:11460: checking for png.h" >&5
+echo "configure:11749: checking for png.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11465 "configure"
+#line 11754 "configure"
#include "confdefs.h"
#include <png.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11470: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11759: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6
-echo "configure:11487: checking for png_check_sig in -lpng" >&5
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+else
+ cat > conftest.$ac_ext <<EOF
+#line 11783 "configure"
+#include "confdefs.h"
+
+ #include <png.h>
+ #include <stdio.h>
+
+ int main()
+ {
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%s",
+ PNG_LIBPNG_VER > 90 ? "yes" : "no");
+ exit(0);
+ }
+
+EOF
+if { (eval echo configure:11799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_header_png_h=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_png_h=no
+fi
+rm -fr conftest*
+fi
+
+
+fi
+
+echo "$ac_t""$ac_cv_header_png_h" 1>&6
+
+ if test "$ac_cv_header_png_h" = "yes"; then
+ echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6
+echo "configure:11818: checking for png_check_sig in -lpng" >&5
ac_lib_var=`echo png'_'png_check_sig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpng -lz -lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11495 "configure"
+#line 11826 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
png_check_sig()
; return 0; }
EOF
-if { (eval echo configure:11506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
+ fi
if test "x$PNG_LINK" = "x" ; then
if test "$wxUSE_LIBPNG" = "sys" ; then
{ echo "configure: error: system png library not found! Use --with-libpng=builtin to use built-in version" 1>&2; exit 1; }
else
- echo "configure: warning: system png library not found, will use built-in instead" 1>&2
+ echo "configure: warning: png library not found or too old, will use built-in instead" 1>&2
wxUSE_LIBPNG=builtin
fi
else
- wxUSE_LIBPNG=yes
+ wxUSE_LIBPNG=sys
fi
fi
fi
if test "$wxUSE_MGL" != 1 ; then
if test "$wxUSE_LIBJPEG" = "sys" -o "$wxUSE_LIBJPEG" = "yes" ; then
echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
-echo "configure:11569: checking for jpeglib.h" >&5
+echo "configure:11896: checking for jpeglib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_jpeglib_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11574 "configure"
+#line 11901 "configure"
#include "confdefs.h"
#undef HAVE_STDLIB_H
; return 0; }
EOF
-if { (eval echo configure:11586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11913: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_jpeglib_h=yes
else
if test "$ac_cv_header_jpeglib_h" = "yes"; then
echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6
-echo "configure:11604: checking for jpeg_read_header in -ljpeg" >&5
+echo "configure:11931: checking for jpeg_read_header in -ljpeg" >&5
ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ljpeg $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11612 "configure"
+#line 11939 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jpeg_read_header()
; return 0; }
EOF
-if { (eval echo configure:11623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
TIFF_INCLUDE=
TIFF_LINK=
+TIFF_PREREQ_LINKS=-lm
if test "$wxUSE_LIBTIFF" != "no" ; then
cat >> confdefs.h <<\EOF
#define wxUSE_LIBTIFF 1
if test "$wxUSE_LIBTIFF" = "sys" -o "$wxUSE_LIBTIFF" = "yes" ; then
+ if test "$wxUSE_LIBJPEG" = "sys"; then
+ TIFF_PREREQ_LINKS="$TIFF_PREREQ_LINKS $JPEG_LINK"
+ fi
+ if test "$wxUSE_ZLIB" = "sys"; then
+ TIFF_PREREQ_LINKS="$TIFF_PREREQ_LINKS $ZLIB_LINK"
+ fi
ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
-echo "configure:11675: checking for tiffio.h" >&5
+echo "configure:12009: checking for tiffio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11680 "configure"
+#line 12014 "configure"
#include "confdefs.h"
#include <tiffio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11685: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6
-echo "configure:11702: checking for TIFFError in -ltiff" >&5
+echo "configure:12036: checking for TIFFError in -ltiff" >&5
ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-ltiff -lm $LIBS"
+LIBS="-ltiff $TIFF_PREREQ_LINKS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 11710 "configure"
+#line 12044 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
TIFFError()
; return 0; }
EOF
-if { (eval echo configure:11721: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
AFMINSTALL=
+WIN32INSTALL=
TOOLKIT=
TOOLKIT_INCLUDE=
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:11776: checking for $ac_hdr" >&5
+echo "configure:12111: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11781 "configure"
+#line 12116 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11786: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for windows.h""... $ac_c" 1>&6
-echo "configure:11814: checking for windows.h" >&5
+echo "configure:12149: checking for windows.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11819 "configure"
+#line 12154 "configure"
#include "confdefs.h"
#include <windows.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11824: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12159: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if w32api has good enough MSIE support""... $ac_c" 1>&6
-echo "configure:11850: checking if w32api has good enough MSIE support" >&5
+echo "configure:12185: checking if w32api has good enough MSIE support" >&5
if eval "test \"`echo '$''{'wx_cv_w32api_win32_ie'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 11856 "configure"
+#line 12191 "configure"
#include "confdefs.h"
#include <w32api.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:11872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:12207: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_w32api_win32_ie=yes
RESFLAGS="--include-dir \$(top_srcdir)/include --include-dir \$(top_srcdir)/\$(program_dir) --define __WIN32__ --define __WIN95__ --define __GNUWIN32__"
RESPROGRAMOBJ="\$(PROGRAM)_resources.o"
+
+ WIN32INSTALL=win32install
fi
if test "$USE_DARWIN" = 1; then
- // Mac OS X/Darwin GCC uses precompiled headers by default
- // this can cause problems both when compiling wxMac and wxBase
- if test "$wxUSE_PRECOMP" = "yes"; then
+ if test "$wxUSE_PRECOMP" = "yes"; then
CPPFLAGS="$CPPFLAGS -cpp-precomp"
else
CPPFLAGS="$CPPFLAGS -no-cpp-precomp"
if test "$wxUSE_GTK" = 1; then
echo $ac_n "checking for GTK+ version""... $ac_c" 1>&6
-echo "configure:11941: checking for GTK+ version" >&5
+echo "configure:12276: checking for GTK+ version" >&5
gtk_version_cached=1
if eval "test \"`echo '$''{'wx_cv_lib_gtk'+set}'`\" = set"; then
GTK_MODULES=gthread
fi
- wx_cv_lib_gtk=
+ wx_cv_lib_gtk=
if test "x$wxUSE_GTK2" = "xyes"; then
# Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:11982: checking for $ac_word" >&5
+echo "configure:12317: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=2.0.0
echo $ac_n "checking for GTK+ - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:12030: checking for GTK+ - version >= $min_gtk_version" >&5
+echo "configure:12365: checking for GTK+ - version >= $min_gtk_version" >&5
if test x$PKG_CONFIG != xno ; then
## don't try to run the test against uninstalled libtool libs
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 12065 "configure"
+#line 12400 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:12140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12174 "configure"
+#line 12509 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:12184: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12519: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
rm -f conf.gtktest
- fi
-
- if test -z "$wx_cv_lib_gtk"; then
+ else
# Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
withval="$with_gtk_prefix"
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:12268: checking for $ac_word" >&5
+echo "configure:12601: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.7
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:12303: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:12636: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 12326 "configure"
+#line 12659 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:12404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:12737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12438 "configure"
+#line 12771 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:12448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
rm -f conf.gtktest
- fi
- if test -z "$wx_cv_lib_gtk"; then
- # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
+ if test -z "$wx_cv_lib_gtk"; then
+ # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
withval="$with_gtk_prefix"
gtk_config_prefix="$withval"
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:12539: checking for $ac_word" >&5
+echo "configure:12871: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_gtk_version=1.2.3
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
-echo "configure:12574: checking for GTK - version >= $min_gtk_version" >&5
+echo "configure:12906: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 12597 "configure"
+#line 12929 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
}
EOF
-if { (eval echo configure:12675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:13007: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12709 "configure"
+#line 13041 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
-if { (eval echo configure:12719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
rm -f conf.gtktest
+ fi
fi
if test -z "$wx_cv_lib_gtk"; then
case "$wx_cv_lib_gtk" in
2.0) WXGTK20=1
+ TOOLKIT_VERSION=2
;;
1.2.7) WXGTK127=1
WXGTK12=1
# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:12800: checking for $ac_word" >&5
+echo "configure:13134: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
PKG_CONFIG_MIN_VERSION=0.9.0
if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
echo $ac_n "checking for pangoft2""... $ac_c" 1>&6
-echo "configure:12844: checking for pangoft2" >&5
+echo "configure:13178: checking for pangoft2" >&5
if $PKG_CONFIG --exists "pangoft2" ; then
echo "$ac_t""yes" 1>&6
succeeded=yes
echo $ac_n "checking PANGOFT2_CFLAGS""... $ac_c" 1>&6
-echo "configure:12851: checking PANGOFT2_CFLAGS" >&5
+echo "configure:13185: checking PANGOFT2_CFLAGS" >&5
PANGOFT2_CFLAGS=`$PKG_CONFIG --cflags "pangoft2"`
echo "$ac_t""$PANGOFT2_CFLAGS" 1>&6
echo $ac_n "checking PANGOFT2_LIBS""... $ac_c" 1>&6
-echo "configure:12856: checking PANGOFT2_LIBS" >&5
+echo "configure:13190: checking PANGOFT2_LIBS" >&5
PANGOFT2_LIBS=`$PKG_CONFIG --libs "pangoft2"`
echo "$ac_t""$PANGOFT2_LIBS" 1>&6
else
fi
fi
+ else
+ if test "$wxUSE_UNICODE" = "yes"; then
+ echo "configure: warning: Unicode configuration not supported with GTK+ 1.x" 1>&2
+ wxUSE_UNICODE=no
+ fi
+ fi
+
+ if test "$USE_DARWIN" != 1; then
+ for ac_func in poll
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:13235: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 13240 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:13263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
fi
TOOLKIT_INCLUDE="$wx_cv_cflags_gtk"
GUIDIST=GTK_DIST
echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
-echo "configure:12900: checking for gdk_im_open in -lgdk" >&5
+echo "configure:13297: checking for gdk_im_open in -lgdk" >&5
ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgdk $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 12908 "configure"
+#line 13305 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gdk_im_open()
; return 0; }
EOF
-if { (eval echo configure:12919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MGL" = 1; then
echo $ac_n "checking for SciTech MGL library""... $ac_c" 1>&6
-echo "configure:12946: checking for SciTech MGL library" >&5
+echo "configure:13343: checking for SciTech MGL library" >&5
if test "x$MGL_ROOT" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MGL library. Make sure MGL_ROOT is set." 1>&2; exit 1; }
case "${host}" in
*-*-linux* )
- mgl_os=linux/gcc/glibc
+ mgl_os="linux/gcc/glibc*"
;;
*-pc-msdosdjgpp )
mgl_os=dos32/dj2
if test "$wxUSE_MICROWIN" = 1; then
echo $ac_n "checking for MicroWindows""... $ac_c" 1>&6
-echo "configure:12994: checking for MicroWindows" >&5
+echo "configure:13391: checking for MicroWindows" >&5
if test "x$MICROWINDOWS" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MicroWindows library. Make sure MICROWINDOWS is set." 1>&2; exit 1; }
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:13026: checking for X" >&5
+echo "configure:13423: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 13088 "configure"
+#line 13485 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13093: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13490: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13162 "configure"
+#line 13559 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:13169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13566: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:13275: checking whether -R must be followed by a space" >&5
+echo "configure:13672: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 13278 "configure"
+#line 13675 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:13285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 13301 "configure"
+#line 13698 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:13308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:13340: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:13737: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13348 "configure"
+#line 13745 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:13359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:13381: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:13778: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13389 "configure"
+#line 13786 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:13400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:13429: checking for gethostbyname" >&5
+echo "configure:13826: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13434 "configure"
+#line 13831 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:13457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:13478: checking for gethostbyname in -lnsl" >&5
+echo "configure:13875: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13486 "configure"
+#line 13883 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:13497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13894: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:13527: checking for connect" >&5
+echo "configure:13924: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13532 "configure"
+#line 13929 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:13555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13952: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:13576: checking for connect in -lsocket" >&5
+echo "configure:13973: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13584 "configure"
+#line 13981 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:13595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13992: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:13619: checking for remove" >&5
+echo "configure:14016: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13624 "configure"
+#line 14021 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:13647: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:13668: checking for remove in -lposix" >&5
+echo "configure:14065: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13676 "configure"
+#line 14073 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:13687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:13711: checking for shmat" >&5
+echo "configure:14108: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13716 "configure"
+#line 14113 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:13739: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:13760: checking for shmat in -lipc" >&5
+echo "configure:14157: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13768 "configure"
+#line 14165 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:13779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:13812: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:14209: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 13820 "configure"
+#line 14217 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:13831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_NANOX" = "yes"; then
echo $ac_n "checking for MicroWindows/NanoX distribution""... $ac_c" 1>&6
-echo "configure:13867: checking for MicroWindows/NanoX distribution" >&5
+echo "configure:14264: checking for MicroWindows/NanoX distribution" >&5
if test "x$MICROWIN" = x ; then
echo "$ac_t""not found" 1>&6
{ echo "configure: error: Cannot find MicroWindows library. Make sure MICROWIN is set." 1>&2; exit 1; }
xpm_link=
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:13882: checking for Xpm library" >&5
+echo "configure:14279: checking for Xpm library" >&5
ac_find_libraries=
-for ac_dir in $SEARCH_LIB;
+for ac_dir in $SEARCH_LIB /usr/lib;
do
for ac_extension in a so sl dylib; do
if test -f "$ac_dir/libXpm.$ac_extension"; then
echo "$ac_t""found at $ac_find_libraries" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13914 "configure"
+#line 14311 "configure"
#include "confdefs.h"
#include <X11/xpm.h>
; return 0; }
EOF
-if { (eval echo configure:13926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:14323: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
xpm_link=" -lXpm"
rm -f conftest*
fi
+ if test "$wxUSE_UNICODE" = "yes"; then
+
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:14355: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
+ ;;
+esac
+fi
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ echo $ac_n "checking for pangox""... $ac_c" 1>&6
+echo "configure:14399: checking for pangox" >&5
+
+ if $PKG_CONFIG --exists "pangox" ; then
+ echo "$ac_t""yes" 1>&6
+ succeeded=yes
+
+ echo $ac_n "checking PANGOX_CFLAGS""... $ac_c" 1>&6
+echo "configure:14406: checking PANGOX_CFLAGS" >&5
+ PANGOX_CFLAGS=`$PKG_CONFIG --cflags "pangox"`
+ echo "$ac_t""$PANGOX_CFLAGS" 1>&6
+
+ echo $ac_n "checking PANGOX_LIBS""... $ac_c" 1>&6
+echo "configure:14411: checking PANGOX_LIBS" >&5
+ PANGOX_LIBS=`$PKG_CONFIG --libs "pangox"`
+ echo "$ac_t""$PANGOX_LIBS" 1>&6
+ else
+ PANGOX_CFLAGS=""
+ PANGOX_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ PANGOX_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pangox"`
+
+ fi
+
+
+
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+
+ CXXFLAGS="$CXXFLAGS $PANGOX_CFLAGS"
+ LIBS="$LIBS $PANGOX_LIBS"
+
+ else
+
+ { echo "configure: error: pangox library not found, library cannot be compiled in Unicode mode" 1>&2; exit 1; }
+
+
+ fi
+
+
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:14450: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
+ ;;
+esac
+fi
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ echo $ac_n "checking for pangoft2""... $ac_c" 1>&6
+echo "configure:14494: checking for pangoft2" >&5
+
+ if $PKG_CONFIG --exists "pangoft2" ; then
+ echo "$ac_t""yes" 1>&6
+ succeeded=yes
+
+ echo $ac_n "checking PANGOFT2_CFLAGS""... $ac_c" 1>&6
+echo "configure:14501: checking PANGOFT2_CFLAGS" >&5
+ PANGOFT2_CFLAGS=`$PKG_CONFIG --cflags "pangoft2"`
+ echo "$ac_t""$PANGOFT2_CFLAGS" 1>&6
+
+ echo $ac_n "checking PANGOFT2_LIBS""... $ac_c" 1>&6
+echo "configure:14506: checking PANGOFT2_LIBS" >&5
+ PANGOFT2_LIBS=`$PKG_CONFIG --libs "pangoft2"`
+ echo "$ac_t""$PANGOFT2_LIBS" 1>&6
+ else
+ PANGOFT2_CFLAGS=""
+ PANGOFT2_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ PANGOFT2_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pangoft2"`
+
+ fi
+
+
+
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+
+ CXXFLAGS="$CXXFLAGS $PANGOFT2_CFLAGS"
+ LIBS="$LIBS $PANGOFT2_LIBS"
+
+ else
+
+ echo "configure: warning: pangoft2 library not found, library will be compiled without printing support" 1>&2
+ wxUSE_PRINTING_ARCHITECTURE="no"
+
+
+ fi
+
+
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:14546: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
+ ;;
+esac
+fi
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ echo $ac_n "checking for pangoxft""... $ac_c" 1>&6
+echo "configure:14590: checking for pangoxft" >&5
+
+ if $PKG_CONFIG --exists "pangoxft" ; then
+ echo "$ac_t""yes" 1>&6
+ succeeded=yes
+
+ echo $ac_n "checking PANGOXFT_CFLAGS""... $ac_c" 1>&6
+echo "configure:14597: checking PANGOXFT_CFLAGS" >&5
+ PANGOXFT_CFLAGS=`$PKG_CONFIG --cflags "pangoxft"`
+ echo "$ac_t""$PANGOXFT_CFLAGS" 1>&6
+
+ echo $ac_n "checking PANGOXFT_LIBS""... $ac_c" 1>&6
+echo "configure:14602: checking PANGOXFT_LIBS" >&5
+ PANGOXFT_LIBS=`$PKG_CONFIG --libs "pangoxft"`
+ echo "$ac_t""$PANGOXFT_LIBS" 1>&6
+ else
+ PANGOXFT_CFLAGS=""
+ PANGOXFT_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ PANGOXFT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pangoxft"`
+
+ fi
+
+
+
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+
+ CXXFLAGS="$CXXFLAGS $PANGOXFT_CFLAGS"
+ LIBS="$LIBS $PANGOXFT_LIBS"
+
+ else
+
+ echo "configure: warning: pangoxft library not found, library will be compiled without anti-aliasing support" 1>&2
+
+
+ fi
+
+ fi
+
wxUSE_UNIVERSAL="yes"
if test "$wxUSE_NANOX" = "yes"; then
if test "$wxUSE_WINE" = 1; then
ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for windows.h""... $ac_c" 1>&6
-echo "configure:13968: checking for windows.h" >&5
+echo "configure:14654: checking for windows.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 13973 "configure"
+#line 14659 "configure"
#include "confdefs.h"
#include <windows.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13978: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:14664: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
xpm_link=
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:14005: checking for Xpm library" >&5
+echo "configure:14691: checking for Xpm library" >&5
ac_find_libraries=
-for ac_dir in $SEARCH_LIB;
+for ac_dir in $SEARCH_LIB /usr/lib;
do
for ac_extension in a so sl dylib; do
if test -f "$ac_dir/libXpm.$ac_extension"; then
mesa_link=
echo $ac_n "checking for Mesa library""... $ac_c" 1>&6
-echo "configure:14033: checking for Mesa library" >&5
+echo "configure:14719: checking for Mesa library" >&5
ac_find_libraries=
-for ac_dir in $SEARCH_LIB;
+for ac_dir in $SEARCH_LIB /usr/lib;
do
for ac_extension in a so sl dylib; do
if test -f "$ac_dir/libMesaGL.$ac_extension"; then
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:14083: checking whether -R must be followed by a space" >&5
+echo "configure:14769: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 14086 "configure"
+#line 14772 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:14093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 14109 "configure"
+#line 14795 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:14116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:14148: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:14834: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14156 "configure"
+#line 14842 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:14167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14853: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:14189: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:14875: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14197 "configure"
+#line 14883 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:14208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14894: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:14237: checking for gethostbyname" >&5
+echo "configure:14923: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14242 "configure"
+#line 14928 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:14265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:14286: checking for gethostbyname in -lnsl" >&5
+echo "configure:14972: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14294 "configure"
+#line 14980 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:14305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:14335: checking for connect" >&5
+echo "configure:15021: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14340 "configure"
+#line 15026 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:14363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:14384: checking for connect in -lsocket" >&5
+echo "configure:15070: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14392 "configure"
+#line 15078 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:14403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:14427: checking for remove" >&5
+echo "configure:15113: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14432 "configure"
+#line 15118 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:14455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15141: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:14476: checking for remove in -lposix" >&5
+echo "configure:15162: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14484 "configure"
+#line 15170 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:14495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15181: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:14519: checking for shmat" >&5
+echo "configure:15205: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 14524 "configure"
+#line 15210 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:14547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:14568: checking for shmat in -lipc" >&5
+echo "configure:15254: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14576 "configure"
+#line 15262 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:14587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:14620: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:15306: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 14628 "configure"
+#line 15314 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:14639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
{ echo "configure: error: X11 not found" 1>&2; exit 1; }
fi
- GUI_TK_LIBRARY="$X_LIBS"
- TOOLKIT_INCLUDE="$X_CFLAGS"
+ GUI_TK_LIBRARY=`echo $X_LIBS | sed 's/ -LNONE//'`
+ TOOLKIT_INCLUDE=`echo $X_CFLAGS | sed 's/ -INONE//'`
AFMINSTALL=afminstall
COMPILED_X_PROGRAM=0
echo $ac_n "checking for Motif/Lesstif headers""... $ac_c" 1>&6
-echo "configure:14674: checking for Motif/Lesstif headers" >&5
+echo "configure:15360: checking for Motif/Lesstif headers" >&5
ac_find_includes=
-for ac_dir in $SEARCH_INCLUDE;
+for ac_dir in $SEARCH_INCLUDE /usr/include;
do
if test -f "$ac_dir/Xm/Xm.h"; then
ac_find_includes=$ac_dir
if test "$ac_find_includes" != "" ; then
echo "$ac_t""found in $ac_find_includes" 1>&6
- ac_path_to_include=$ac_find_includes
- echo "$TOOLKIT_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null
- result=$?
- if test $result = 0; then
+ if test "x$ac_find_includes" = "x/usr/include"; then
ac_path_to_include=""
else
- ac_path_to_include=" -I$ac_find_includes"
+ echo "$TOOLKIT_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null
+ result=$?
+ if test $result = 0; then
+ ac_path_to_include=""
+ else
+ ac_path_to_include=" -I$ac_find_includes"
+ fi
fi
TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE$ac_path_to_include"
else
cat > conftest.$ac_ext <<EOF
-#line 14700 "configure"
+#line 15389 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:14712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15401: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""found in default search path" 1>&6
if test "$COMPILED_X_PROGRAM" = 0; then
echo $ac_n "checking for Motif/Lesstif library""... $ac_c" 1>&6
-echo "configure:14733: checking for Motif/Lesstif library" >&5
+echo "configure:15422: checking for Motif/Lesstif library" >&5
ac_find_libraries=
-for ac_dir in $SEARCH_LIB;
+for ac_dir in $SEARCH_LIB /usr/lib;
do
for ac_extension in a so sl dylib; do
if test -f "$ac_dir/libXm.$ac_extension"; then
CFLAGS="$CFLAGS $TOOLKIT_INCLUDE"
cat > conftest.$ac_ext <<EOF
-#line 14764 "configure"
+#line 15453 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:14776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15465: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""found in default search path" 1>&6
xpm_link=
echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
-echo "configure:14800: checking for Xpm library" >&5
+echo "configure:15489: checking for Xpm library" >&5
ac_find_libraries=
-for ac_dir in $SEARCH_LIB;
+for ac_dir in $SEARCH_LIB /usr/lib;
do
for ac_extension in a so sl dylib; do
if test -f "$ac_dir/libXpm.$ac_extension"; then
CFLAGS="$CFLAGS $TOOLKIT_INCLUDE"
cat > conftest.$ac_ext <<EOF
-#line 14836 "configure"
+#line 15525 "configure"
#include "confdefs.h"
#include <X11/xpm.h>
; return 0; }
EOF
-if { (eval echo configure:14848: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:15537: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
xpm_link=" -lXpm"
fi
echo $ac_n "checking if we need -lXp and/or -lSM -lICE""... $ac_c" 1>&6
-echo "configure:14875: checking if we need -lXp and/or -lSM -lICE" >&5
+echo "configure:15564: checking if we need -lXp and/or -lSM -lICE" >&5
libp_link=""
libsm_ice_link=""
libs_found=0
for libp in "" " -lXp"; do
if test "$libs_found" = "0"; then
for libsm_ice in " -lSM -lICE"; do
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = "0"; then
save_LIBS="$LIBS"
LIBS="$GUI_TK_LIBRARY -lXm${xpm_link} ${libp} -lXmu -lXext -lXt${libsm_ice} -lX11"
save_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $TOOLKIT_INCLUDE"
cat > conftest.$ac_ext <<EOF
-#line 14889 "configure"
+#line 15578 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
; return 0; }
EOF
-if { (eval echo configure:14904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:15593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
libp_link="$libp"
if test "$wxUSE_PM" = 1; then
TOOLKIT=PM
GUIDIST=GTK_DIST
+ echo "configure: warning: OS/2 PM requires old resource format, re-enabled" 1>&2
+ wxUSE_PROLOGIO="yes"
+ wxUSE_RESOURCES="yes"
+ echo "configure: warning: OS/2 threads are not yet supported... disabled" 1>&2
+ wxUSE_THREADS="no"
fi
if test "$TOOLKIT" = "PM" ; then
else
ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6
-echo "configure:15047: checking for GL/gl.h" >&5
+echo "configure:15741: checking for GL/gl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15052 "configure"
+#line 15746 "configure"
#include "confdefs.h"
#include <GL/gl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:15057: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:15751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for -lGL""... $ac_c" 1>&6
-echo "configure:15075: checking for -lGL" >&5
+echo "configure:15769: checking for -lGL" >&5
ac_find_libraries=
-for ac_dir in $SEARCH_LIB;
+for ac_dir in $SEARCH_LIB /usr/lib;
do
for ac_extension in a so sl dylib; do
if test -f "$ac_dir/libGL.$ac_extension"; then
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for -lMesaGL""... $ac_c" 1>&6
-echo "configure:15108: checking for -lMesaGL" >&5
+echo "configure:15802: checking for -lMesaGL" >&5
ac_find_libraries=
-for ac_dir in $SEARCH_LIB;
+for ac_dir in $SEARCH_LIB /usr/lib;
do
for ac_extension in a so sl dylib; do
if test -f "$ac_dir/libMesaGL.$ac_extension"; then
lib_debug_suffix=d
fi
-TOOLCHAIN_NAME="${TOOLKIT_DIR}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}-${WX_RELEASE}"
-TOOLCHAIN_NAME_GL="${TOOLKIT_DIR}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}_gl-${WX_RELEASE}"
+WX_VERSION_TAG=`echo WX${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}_${WX_RELEASE} | tr "[a-z]" "[A-Z]"`
+
+TOOLCHAIN_NAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}-${WX_RELEASE}"
+TOOLCHAIN_NAME_GL="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}_gl-${WX_RELEASE}"
if test "$cross_compiling" = "yes"; then
TOOLCHAIN_NAME="${TOOLCHAIN_NAME}-${host_alias}"
WX_LIBRARY="wx_${TOOLCHAIN_NAME}"
WX_LIBRARY_GL="wx_${TOOLCHAIN_NAME_GL}"
+WX_LIBRARY_BASENAME="wx_${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}"
WX_LIBRARY_NAME_SHARED="lib${WX_LIBRARY}.${SO_SUFFIX}.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
WX_LIBRARY_NAME_SHARED_GL="lib${WX_LIBRARY_GL}.${SO_SUFFIX}.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
PIC_FLAG="-fPIC"
fi
+
+
+ found_versioning=no
+
+
+ if test $found_versioning = no ; then
+ echo $ac_n "checking if the linker accepts --version-script""... $ac_c" 1>&6
+echo "configure:15964: checking if the linker accepts --version-script" >&5
+if eval "test \"`echo '$''{'wx_cv_version_script'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ echo "VER_1 { *; };" >conftest.sym
+ echo "int main() { return 0; }" >conftest.cpp
+
+ if { ac_try='
+ $CXX -o conftest.output $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.cpp
+ -Wl,--version-script,conftest.sym >/dev/null 2>conftest.stderr'; { (eval echo configure:15974: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } ; then
+ if test -s conftest.stderr ; then
+ wx_cv_version_script=no
+ else
+ wx_cv_version_script=yes
+ fi
+ else
+ wx_cv_version_script=no
+ fi
+ rm -f conftest.output conftest.stderr conftest.sym conftest.cpp
+
+fi
+
+echo "$ac_t""$wx_cv_version_script" 1>&6
+ if test $wx_cv_version_script = yes ; then
+ LDFLAGS_VERSIONING="-Wl,--version-script,\$(top_builddir)/version-script"
+ fi
+ fi
+
+
SHARED_LD="${CXX} -shared -o"
case "${host}" in
*-hp-hpux* )
if test "$GCC" = "yes"; then
- SHARED_LD="${SHARED_LD} ${PIC_FLAG}"
+ SHARED_LD="${CXX} -shared ${PIC_FLAG} -o"
else
LDFLAGS="$LDFLAGS -L/usr/lib"
*-*-linux* )
if test "$GCC" != "yes"; then
echo $ac_n "checking for Intel compiler""... $ac_c" 1>&6
-echo "configure:15284: checking for Intel compiler" >&5
+echo "configure:16018: checking for Intel compiler" >&5
if eval "test \"`echo '$''{'wx_cv_prog_icc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15290 "configure"
+#line 16024 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:15301: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16035: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_prog_icc=yes
else
;;
*-*-aix* )
- # Extract the first word of "makeC++SharedLib", so it can be a program name with args.
+ if test "$GCC" != "yes"; then
+ # Extract the first word of "makeC++SharedLib", so it can be a program name with args.
set dummy makeC++SharedLib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:15353: checking for $ac_word" >&5
+echo "configure:16088: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AIX_CXX_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
- SHARED_LD="$(AIX_CXX_LD) -p 0 -o"
+ SHARED_LD="$(AIX_CXX_LD) -p 0 -o"
+ fi
;;
*-*-cygwin* | *-*-mingw32* )
-
WX_LIBRARY_IMPORTLIB="${WX_LIBRARY_NAME_SHARED}.a"
SHARED_LD="${CXX} -shared -Wl,--out-implib,lib/${WX_LIBRARY_IMPORTLIB} -o"
PIC_FLAG="-UWXUSINGDLL -DWXMAKINGDLL=1 -D_DLL=1 -D_WINDLL=1"
- if test "$wxUSE_OPENGL" = "yes"; then
- WX_ALL_INSTALLED="preinstall_gl"
- WX_ALL="\$(build_libdir)/${WX_LIBRARY_NAME_SHARED} \$(build_libdir)/${WX_LIBRARY_NAME_SHARED_GL}"
- else
- WX_ALL="\$(build_libdir)/${WX_LIBRARY_NAME_SHARED}"
+ WX_ALL="\$(build_libdir)/${WX_LIBRARY_NAME_SHARED}"
+ WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
+
+ if test "$wxUSE_OPENGL" = "yes"; then
+ LIBS="${LIBS} ${OPENGL_LIBS}"
fi
;;
SHARED_LD="${LD} -shared -o"
;;
+ *-*-irix* )
+ if test "$GCC" != "yes"; then
+ PIC_FLAG="-KPIC"
+ fi
+ ;;
+
*-*-freebsd* | *-*-openbsd* | *-*-netbsd* | \
*-*-sunos4* | \
- *-*-irix5* | *-*-irix6* | \
*-*-osf* | \
*-*-dgux5* | \
*-*-sysv5* )
# Extract the first word of "Rez", so it can be a program name with args.
set dummy Rez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:15461: checking for $ac_word" >&5
+echo "configure:16201: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RESCOMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "DeRez", so it can be a program name with args.
set dummy DeRez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:15491: checking for $ac_word" >&5
+echo "configure:16231: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DEREZ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
MACOSX_BUNDLE="bundle"
- if test "$wxUSE_SHARED" = "yes"; then
- LIBWXMACRESCOMP="\$(RESCOMP) -t APPL Carbon.r -o \$(BIN_PROGRAM)"
- LIBWXMACRESWXCONFIG="${RESCOMP} -t APPL Carbon.r -o"
- else
- LIBWXMACRESCOMP="\$(RESCOMP) -t APPL Carbon.r ${LIBWXMACRES} -o \$(BIN_PROGRAM)"
- LIBWXMACRESWXCONFIG="${RESCOMP} -t APPL Carbon.r \${prefix}/lib/${WX_RESOURCES_MACOSX_ASCII} -o"
- fi
+ LIBWXMACRESCOMP="\$(RESCOMP) -t APPL Carbon.r ${LIBWXMACRES} -o \$(BIN_PROGRAM)"
+ LIBWXMACRESWXCONFIG="${RESCOMP} -t APPL Carbon.r \${prefix}/lib/${WX_RESOURCES_MACOSX_ASCII} -o"
else
if test "$wxUSE_PM" = 1; then
LIBWXMACRESCOMP="emxbind -ep \$(BIN_PROGRAM)"
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:15534: checking for ANSI C header files" >&5
+echo "configure:16269: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15539 "configure"
+#line 16274 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:15547: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:16282: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 15564 "configure"
+#line 16299 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 15582 "configure"
+#line 16317 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 15603 "configure"
+#line 16338 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:15614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:16349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:15638: checking for mode_t" >&5
+echo "configure:16373: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15643 "configure"
+#line 16378 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:15671: checking for off_t" >&5
+echo "configure:16406: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15676 "configure"
+#line 16411 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:15704: checking for pid_t" >&5
+echo "configure:16439: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15709 "configure"
+#line 16444 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:15737: checking for size_t" >&5
+echo "configure:16472: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15742 "configure"
+#line 16477 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:15770: checking for uid_t in sys/types.h" >&5
+echo "configure:16505: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15775 "configure"
+#line 16510 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking if size_t is unsigned int""... $ac_c" 1>&6
-echo "configure:15813: checking if size_t is unsigned int" >&5
+echo "configure:16548: checking if size_t is unsigned int" >&5
if eval "test \"`echo '$''{'wx_cv_size_t_is_uint'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15818 "configure"
+#line 16553 "configure"
#include "confdefs.h"
#include <stddef.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:15831: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16566: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_size_t_is_uint=no
else
else
echo $ac_n "checking if size_t is unsigned long""... $ac_c" 1>&6
-echo "configure:15854: checking if size_t is unsigned long" >&5
+echo "configure:16589: checking if size_t is unsigned long" >&5
if eval "test \"`echo '$''{'wx_cv_size_t_is_ulong'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15859 "configure"
+#line 16594 "configure"
#include "confdefs.h"
#include <stddef.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:15872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_size_t_is_ulong=no
else
echo $ac_n "checking for pw_gecos in struct passwd""... $ac_c" 1>&6
-echo "configure:15906: checking for pw_gecos in struct passwd" >&5
+echo "configure:16641: checking for pw_gecos in struct passwd" >&5
if eval "test \"`echo '$''{'wx_cv_struct_pw_gecos'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15912 "configure"
+#line 16647 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:15923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:16658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_pw_gecos=yes
for ac_func in wcslen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:15963: checking for $ac_func" >&5
+echo "configure:16698: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 15968 "configure"
+#line 16703 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:15991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$WCSLEN_FOUND" = 0; then
if test "$TOOLKIT" = "MSW"; then
echo $ac_n "checking for wcslen in -lmsvcrt""... $ac_c" 1>&6
-echo "configure:16019: checking for wcslen in -lmsvcrt" >&5
+echo "configure:16754: checking for wcslen in -lmsvcrt" >&5
ac_lib_var=`echo msvcrt'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmsvcrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16027 "configure"
+#line 16762 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:16038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for wcslen in -lw""... $ac_c" 1>&6
-echo "configure:16060: checking for wcslen in -lw" >&5
+echo "configure:16795: checking for wcslen in -lw" >&5
ac_lib_var=`echo w'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lw $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 16068 "configure"
+#line 16803 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wcslen()
; return 0; }
EOF
-if { (eval echo configure:16079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in wcsrtombs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16115: checking for $ac_func" >&5
+echo "configure:16850: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16120 "configure"
+#line 16855 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in vsnprintf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16183: checking for $ac_func" >&5
+echo "configure:16918: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16188 "configure"
+#line 16923 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:16949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in fputwc wprintf vswprintf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16243: checking for $ac_func" >&5
+echo "configure:16978: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16248 "configure"
+#line 16983 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
+ echo $ac_n "checking for _vsnwprintf""... $ac_c" 1>&6
+echo "configure:17034: checking for _vsnwprintf" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 17036 "configure"
+#include "confdefs.h"
+#include <wchar.h>
+int main() {
+&_vsnwprintf;
+; return 0; }
+EOF
+if { (eval echo configure:17043: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE__VSNWPRINTF 1
+EOF
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*;
fi
ac_ext=c
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:16336: checking for iconv" >&5
+echo "configure:17095: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 16344 "configure"
+#line 17103 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:16354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS -liconv"
cat > conftest.$ac_ext <<EOF
-#line 16366 "configure"
+#line 17125 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:16376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking if iconv needs const""... $ac_c" 1>&6
-echo "configure:16397: checking if iconv needs const" >&5
+echo "configure:17156: checking if iconv needs const" >&5
if eval "test \"`echo '$''{'wx_cv_func_iconv_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16402 "configure"
+#line 17161 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:16421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:17180: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_iconv_const="no"
else
for ac_func in sigaction
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16466: checking for $ac_func" >&5
+echo "configure:17225: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16471 "configure"
+#line 17230 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17253: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for sa_handler type""... $ac_c" 1>&6
-echo "configure:16535: checking for sa_handler type" >&5
+echo "configure:17294: checking for sa_handler type" >&5
if eval "test \"`echo '$''{'wx_cv_type_sa_handler'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16541 "configure"
+#line 17300 "configure"
#include "confdefs.h"
#include <signal.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:16553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:17312: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_sa_handler=int
for ac_func in mkstemp mktemp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16590: checking for $ac_func" >&5
+echo "configure:17349: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16595 "configure"
+#line 17354 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for statfs""... $ac_c" 1>&6
-echo "configure:16644: checking for statfs" >&5
+echo "configure:17403: checking for statfs" >&5
if eval "test \"`echo '$''{'wx_cv_func_statfs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16649 "configure"
+#line 17408 "configure"
#include "confdefs.h"
#if defined(__BSD__)
; return 0; }
EOF
-if { (eval echo configure:16670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:17429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_statfs=yes
else
echo $ac_n "checking for statvfs""... $ac_c" 1>&6
-echo "configure:16697: checking for statvfs" >&5
+echo "configure:17456: checking for statvfs" >&5
if eval "test \"`echo '$''{'wx_cv_func_statvfs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16702 "configure"
+#line 17461 "configure"
#include "confdefs.h"
#include <sys/statvfs.h>
; return 0; }
EOF
-if { (eval echo configure:16718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:17477: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_statvfs=yes
for ac_func in fcntl flock
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16752: checking for $ac_func" >&5
+echo "configure:17511: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16757 "configure"
+#line 17516 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in timegm
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16814: checking for $ac_func" >&5
+echo "configure:17573: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16819 "configure"
+#line 17578 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in putenv setenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16870: checking for $ac_func" >&5
+echo "configure:17629: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16875 "configure"
+#line 17634 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in nanosleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:16945: checking for $ac_func" >&5
+echo "configure:17704: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 16950 "configure"
+#line 17709 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:16973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17732: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6
-echo "configure:16998: checking for nanosleep in -lposix4" >&5
+echo "configure:17757: checking for nanosleep in -lposix4" >&5
ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17006 "configure"
+#line 17765 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
nanosleep()
; return 0; }
EOF
-if { (eval echo configure:17017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17776: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in usleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17045: checking for $ac_func" >&5
+echo "configure:17804: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17050 "configure"
+#line 17809 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in uname gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17116: checking for $ac_func" >&5
+echo "configure:17875: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17121 "configure"
+#line 17880 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strtok_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17181: checking for $ac_func" >&5
+echo "configure:17940: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17186 "configure"
+#line 17945 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:17971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17249: checking for $ac_func" >&5
+echo "configure:18008: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17254 "configure"
+#line 18013 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
-echo "configure:17302: checking for inet_addr in -lnsl" >&5
+echo "configure:18061: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17310 "configure"
+#line 18069 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:17321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lresolv""... $ac_c" 1>&6
-echo "configure:17340: checking for inet_addr in -lresolv" >&5
+echo "configure:18099: checking for inet_addr in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17348 "configure"
+#line 18107 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:17359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lsocket""... $ac_c" 1>&6
-echo "configure:17378: checking for inet_addr in -lsocket" >&5
+echo "configure:18137: checking for inet_addr in -lsocket" >&5
ac_lib_var=`echo socket'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17386 "configure"
+#line 18145 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_addr()
; return 0; }
EOF
-if { (eval echo configure:17397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in inet_aton
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17433: checking for $ac_func" >&5
+echo "configure:18192: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17438 "configure"
+#line 18197 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17461: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_aton in -l$INET_LINK""... $ac_c" 1>&6
-echo "configure:17486: checking for inet_aton in -l$INET_LINK" >&5
+echo "configure:18245: checking for inet_aton in -l$INET_LINK" >&5
ac_lib_var=`echo $INET_LINK'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$INET_LINK $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17494 "configure"
+#line 18253 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:17505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
case $flag in
none)
echo $ac_n "checking whether pthreads work without any flags""... $ac_c" 1>&6
-echo "configure:17640: checking whether pthreads work without any flags" >&5
+echo "configure:18399: checking whether pthreads work without any flags" >&5
;;
-*)
echo $ac_n "checking whether pthreads work with $flag""... $ac_c" 1>&6
-echo "configure:17645: checking whether pthreads work with $flag" >&5
+echo "configure:18404: checking whether pthreads work with $flag" >&5
THREADS_CFLAGS="$flag"
;;
*)
echo $ac_n "checking for the pthreads library -l$flag""... $ac_c" 1>&6
-echo "configure:17651: checking for the pthreads library -l$flag" >&5
+echo "configure:18410: checking for the pthreads library -l$flag" >&5
THREADS_LINK="-l$flag"
;;
esac
CFLAGS="$THREADS_CFLAGS $CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 17662 "configure"
+#line 18421 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
pthread_create(0,0,0,0);
; return 0; }
EOF
-if { (eval echo configure:17669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
THREADS_OK=yes
else
wxUSE_THREADS=no
echo "configure: warning: No thread support on this system... disabled" 1>&2
else
- LIBS="$THREADS_LINK $THREADS_CFLAGS $LIBS"
+ LDFLAGS="$THREADS_CFLAGS $LDFLAGS"
+ LIBS="$THREADS_LINK $LIBS"
echo $ac_n "checking if more special flags are required for pthreads""... $ac_c" 1>&6
-echo "configure:17697: checking if more special flags are required for pthreads" >&5
+echo "configure:18457: checking if more special flags are required for pthreads" >&5
flag=no
case "${host}" in
- *-aix* | *-freebsd*)
+ *-aix*)
+ LDFLAGS="-L/usr/lib/threads $LDFLAGS"
+ flag="-D_THREAD_SAFE"
+ ;;
+ *-freebsd*)
flag="-D_THREAD_SAFE"
;;
+ *-hp-hpux* )
+ flag="-D_REENTRANT"
+ ;;
*solaris* | alpha*-osf*)
flag="-D_REENTRANT"
;;
for ac_func in thr_setconcurrency
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:17723: checking for $ac_func" >&5
+echo "configure:18490: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17728 "configure"
+#line 18495 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:17751: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:17780: checking for $ac_hdr" >&5
+echo "configure:18547: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17785 "configure"
+#line 18552 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:17790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:18557: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$ac_cv_header_sched_h" = "yes"; then
echo $ac_n "checking for sched_yield""... $ac_c" 1>&6
-echo "configure:17818: checking for sched_yield" >&5
+echo "configure:18585: checking for sched_yield" >&5
if eval "test \"`echo '$''{'ac_cv_func_sched_yield'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17823 "configure"
+#line 18590 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char sched_yield(); below. */
; return 0; }
EOF
-if { (eval echo configure:17846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_sched_yield=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
-echo "configure:17868: checking for sched_yield in -lposix4" >&5
+echo "configure:18635: checking for sched_yield in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 17876 "configure"
+#line 18643 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:17887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
HAVE_PRIOR_FUNCS=0
echo $ac_n "checking for pthread_attr_getschedpolicy""... $ac_c" 1>&6
-echo "configure:17920: checking for pthread_attr_getschedpolicy" >&5
+echo "configure:18687: checking for pthread_attr_getschedpolicy" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_attr_getschedpolicy'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17925 "configure"
+#line 18692 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_attr_getschedpolicy(); below. */
; return 0; }
EOF
-if { (eval echo configure:17948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18715: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_attr_getschedpolicy=yes"
else
if eval "test \"`echo '$ac_cv_func_'pthread_attr_getschedpolicy`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for pthread_attr_setschedparam""... $ac_c" 1>&6
-echo "configure:17963: checking for pthread_attr_setschedparam" >&5
+echo "configure:18730: checking for pthread_attr_setschedparam" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_attr_setschedparam'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 17968 "configure"
+#line 18735 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_attr_setschedparam(); below. */
; return 0; }
EOF
-if { (eval echo configure:17991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_attr_setschedparam=yes"
else
if eval "test \"`echo '$ac_cv_func_'pthread_attr_setschedparam`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for sched_get_priority_max""... $ac_c" 1>&6
-echo "configure:18006: checking for sched_get_priority_max" >&5
+echo "configure:18773: checking for sched_get_priority_max" >&5
if eval "test \"`echo '$''{'ac_cv_func_sched_get_priority_max'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18011 "configure"
+#line 18778 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes
else
; return 0; }
EOF
-if { (eval echo configure:18036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_sched_get_priority_max=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_get_priority_max in -lposix4""... $ac_c" 1>&6
-echo "configure:18054: checking for sched_get_priority_max in -lposix4" >&5
+echo "configure:18821: checking for sched_get_priority_max in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 18062 "configure"
+#line 18829 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_get_priority_max()
; return 0; }
EOF
-if { (eval echo configure:18073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for pthread_cancel""... $ac_c" 1>&6
-echo "configure:18118: checking for pthread_cancel" >&5
+echo "configure:18885: checking for pthread_cancel" >&5
if eval "test \"`echo '$''{'ac_cv_func_pthread_cancel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18123 "configure"
+#line 18890 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_cancel(); below. */
; return 0; }
EOF
-if { (eval echo configure:18146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:18913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_cancel=yes"
else
echo $ac_n "checking for pthread_cleanup_push/pop""... $ac_c" 1>&6
-echo "configure:18171: checking for pthread_cleanup_push/pop" >&5
+echo "configure:18938: checking for pthread_cleanup_push/pop" >&5
if eval "test \"`echo '$''{'wx_cv_func_pthread_cleanup_push'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18177 "configure"
+#line 18944 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:18187: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18954: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_pthread_cleanup_push=yes
echo $ac_n "checking for pthread_mutexattr_t""... $ac_c" 1>&6
-echo "configure:18215: checking for pthread_mutexattr_t" >&5
+echo "configure:18982: checking for pthread_mutexattr_t" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_mutexattr_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18221 "configure"
+#line 18988 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:18231: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:18998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_pthread_mutexattr_t=yes
else
echo $ac_n "checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER""... $ac_c" 1>&6
-echo "configure:18258: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
+echo "configure:19025: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_rec_mutex_init'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18264 "configure"
+#line 19031 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:18273: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19040: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_pthread_rec_mutex_init=yes
case "${host}" in
*-*-mingw32* )
echo $ac_n "checking if compiler supports -mthreads""... $ac_c" 1>&6
-echo "configure:18308: checking if compiler supports -mthreads" >&5
+echo "configure:19075: checking if compiler supports -mthreads" >&5
if eval "test \"`echo '$''{'wx_cv_cflags_mthread'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS_OLD="$CFLAGS"
CFLAGS="$CFLAGS -mthreads"
cat > conftest.$ac_ext <<EOF
-#line 18316 "configure"
+#line 19083 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:18323: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19090: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_cflags_mthread=yes
else
else
if test "$ac_cv_func_strtok_r" = "yes"; then
echo $ac_n "checking if -D_REENTRANT is needed""... $ac_c" 1>&6
-echo "configure:18362: checking if -D_REENTRANT is needed" >&5
+echo "configure:19129: checking if -D_REENTRANT is needed" >&5
if test "$NEEDS_D_REENTRANT_FOR_R_FUNCS" = 1; then
TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D_REENTRANT"
echo "$ac_t""yes" 1>&6
CODE_GEN_FLAGS="$CODE_GEN_FLAGS -fno-pcc-struct-return"
fi
- case "${host}" in
+ case "${host}" in
powerpc*-*-aix* )
CODE_GEN_FLAGS="$CODE_GEN_FLAGS -mminimal-toc"
;;
+ *-hppa* )
+ CODE_GEN_FLAGS="$CODE_GEN_FLAGS -ffunction-sections"
+ ;;
esac
fi
for ac_func in strptime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18747: checking for $ac_func" >&5
+echo "configure:19517: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18752 "configure"
+#line 19522 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18775: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for timezone variable in <time.h>""... $ac_c" 1>&6
-echo "configure:18801: checking for timezone variable in <time.h>" >&5
+echo "configure:19571: checking for timezone variable in <time.h>" >&5
if eval "test \"`echo '$''{'wx_cv_var_timezone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18807 "configure"
+#line 19577 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18819: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19589: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18830 "configure"
+#line 19600 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=_timezone
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 18853 "configure"
+#line 19623 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18865: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19635: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_var_timezone=__timezone
for ac_func in localtime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:18906: checking for $ac_func" >&5
+echo "configure:19676: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18911 "configure"
+#line 19681 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:18934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_localtime" = "yes"; then
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:18961: checking for tm_gmtoff in struct tm" >&5
+echo "configure:19731: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'wx_cv_struct_tm_has_gmtoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 18967 "configure"
+#line 19737 "configure"
#include "confdefs.h"
#include <time.h>
; return 0; }
EOF
-if { (eval echo configure:18979: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19749: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_struct_tm_has_gmtoff=yes
for ac_func in gettimeofday ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19008: checking for $ac_func" >&5
+echo "configure:19778: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19013 "configure"
+#line 19783 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$ac_cv_func_gettimeofday" = "yes"; then
echo $ac_n "checking whether gettimeofday takes two arguments""... $ac_c" 1>&6
-echo "configure:19063: checking whether gettimeofday takes two arguments" >&5
+echo "configure:19833: checking whether gettimeofday takes two arguments" >&5
if eval "test \"`echo '$''{'wx_cv_func_gettimeofday_has_2_args'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19078 "configure"
+#line 19848 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:19091: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19861: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=yes
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 19099 "configure"
+#line 19869 "configure"
#include "confdefs.h"
#include <sys/time.h>
; return 0; }
EOF
-if { (eval echo configure:19112: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:19882: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_func_gettimeofday_has_2_args=no
else
if test "$wxUSE_SOCKETS" = "yes"; then
if test "$TOOLKIT" != "MSW"; then
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:19167: checking for socket" >&5
+echo "configure:19937: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19172 "configure"
+#line 19942 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:19195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:19965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:19213: checking for socket in -lsocket" >&5
+echo "configure:19983: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19221 "configure"
+#line 19991 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:19232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_SOCKETS" = "yes" ; then
if test "$TOOLKIT" != "MSW"; then
echo $ac_n "checking what is the type of the third argument of getsockname""... $ac_c" 1>&6
-echo "configure:19268: checking what is the type of the third argument of getsockname" >&5
+echo "configure:20038: checking what is the type of the third argument of getsockname" >&5
if eval "test \"`echo '$''{'wx_cv_type_getsockname3'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19283 "configure"
+#line 20053 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:19296: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:20066: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=socklen_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 19304 "configure"
+#line 20074 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:19317: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:20087: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=size_t
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 19325 "configure"
+#line 20095 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:19338: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:20108: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
wx_cv_type_getsockname3=int
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:19410: checking for $ac_hdr" >&5
+echo "configure:20180: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19415 "configure"
+#line 20185 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:19420: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:20190: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19474: checking for $ac_func" >&5
+echo "configure:20244: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19479 "configure"
+#line 20249 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:19530: checking for dlopen in -ldl" >&5
+echo "configure:20300: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19538 "configure"
+#line 20308 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:19549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in shl_load
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19578: checking for $ac_func" >&5
+echo "configure:20348: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19583 "configure"
+#line 20353 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld in -lshl_load""... $ac_c" 1>&6
-echo "configure:19634: checking for dld in -lshl_load" >&5
+echo "configure:20404: checking for dld in -lshl_load" >&5
ac_lib_var=`echo shl_load'_'dld | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lshl_load $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19642 "configure"
+#line 20412 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dld()
; return 0; }
EOF
-if { (eval echo configure:19653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in dlerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:19692: checking for $ac_func" >&5
+echo "configure:20462: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 19697 "configure"
+#line 20467 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:19720: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlerror in -ldl""... $ac_c" 1>&6
-echo "configure:19745: checking for dlerror in -ldl" >&5
+echo "configure:20515: checking for dlerror in -ldl" >&5
ac_lib_var=`echo dl'_'dlerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19753 "configure"
+#line 20523 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlerror()
; return 0; }
EOF
-if { (eval echo configure:19764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$wxUSE_MSW" = 1 -a "$wxUSE_UNICODE_MSLU" = "yes"; then
echo $ac_n "checking for main in -lunicows""... $ac_c" 1>&6
-echo "configure:19839: checking for main in -lunicows" >&5
+echo "configure:20609: checking for main in -lunicows" >&5
ac_lib_var=`echo unicows'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lunicows $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 19847 "configure"
+#line 20617 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:19854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:20624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
#define wxUSE_PROLOGIO 1
EOF
+ ALL_OBJECTS="$ALL_OBJECTS parser.o"
fi
if test "$wxUSE_RESOURCES" = "yes" ; then
if test "$wxUSE_NANOX" = "yes"; then
echo "configure: warning: Cannot use resource database functions in NanoX" 1>&2
- else
- cat >> confdefs.h <<\EOF
+ else
+ cat >> confdefs.h <<\EOF
#define wxUSE_RESOURCES 1
EOF
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS resource"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS resource"
+ fi
+ if test "$wxUSE_PROLOGIO" != "yes" ; then
+ ALL_OBJECTS="$ALL_OBJECTS parser.o"
fi
fi
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:20032: checking for $ac_hdr" >&5
+echo "configure:20806: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 20037 "configure"
+#line 20811 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:20042: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:20816: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if g++ requires -fvtable-thunks""... $ac_c" 1>&6
-echo "configure:20081: checking if g++ requires -fvtable-thunks" >&5
+echo "configure:20855: checking if g++ requires -fvtable-thunks" >&5
cat > conftest.$ac_ext <<EOF
-#line 20083 "configure"
+#line 20857 "configure"
#include "confdefs.h"
#include <windows.h>
#include <ole2.h>
; return 0; }
EOF
-if { (eval echo configure:20091: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:20865: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:20152: checking for $ac_hdr" >&5
+echo "configure:20926: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 20157 "configure"
+#line 20931 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:20162: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:20936: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking if g++ requires -fvtable-thunks""... $ac_c" 1>&6
-echo "configure:20201: checking if g++ requires -fvtable-thunks" >&5
+echo "configure:20975: checking if g++ requires -fvtable-thunks" >&5
cat > conftest.$ac_ext <<EOF
-#line 20203 "configure"
+#line 20977 "configure"
#include "confdefs.h"
#include <windows.h>
#include <ole2.h>
; return 0; }
EOF
-if { (eval echo configure:20211: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:20985: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
else
fi
-LIBS="$ZLIB_LINK $POSIX4_LINK $INET_LINK $WCHAR_LINK $DL_LINK -lm $LIBS"
+LIBS="$ZLIB_LINK $POSIX4_LINK $INET_LINK $WCHAR_LINK $DL_LINK $LIBS"
+
+have_cos=0
+have_floor=0
+for ac_func in cos
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:21836: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 21841 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:21864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ have_cos=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in floor
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:21891: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 21896 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:21919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ have_floor=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking if floating point functions link without -lm""... $ac_c" 1>&6
+echo "configure:21944: checking if floating point functions link without -lm" >&5
+if test "$have_cos" = 1 -a "$have_floor" = 1; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+ LIBS="$LIBS -lm"
+ # use different functions to avoid configure caching
+ have_sin=0
+ have_ceil=0
+ for ac_func in sin
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:21956: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 21961 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:21984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ have_sin=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ for ac_func in ceil
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:22011: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 22016 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:22039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ have_ceil=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ echo $ac_n "checking if floating point functions link with -lm""... $ac_c" 1>&6
+echo "configure:22064: checking if floating point functions link with -lm" >&5
+ if test "$have_sin" = 1 -a "$have_ceil" = 1; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ # not sure we should warn the user, crash, etc.
+ fi
+fi
if test "$wxUSE_GUI" = "yes"; then
+
+
+
+
+
+
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:21195: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:22217: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
wx_cv_target_library=$WX_TARGET_LIBRARY
wx_cv_target_library_gl=$WX_TARGET_LIBRARY_GL
wx_cv_target_libtype=$WX_TARGET_LIBRARY_TYPE
+wx_cv_library_basename=${WX_LIBRARY_BASENAME}
+wx_cv_release=${WX_RELEASE}
+wx_cv_current=${WX_CURRENT}
+wx_cv_revision=${WX_REVISION}
+wx_cv_age=${WX_AGE}
+wx_cv_use_gui=${USE_GUI}
+wx_cv_use_resources=${wxUSE_RESOURCES}
export wx_cv_path_samplesubdirs wx_cv_if_gnu_make \
wx_cv_path_ifs wx_cv_program_ext \
- wx_cv_target_library wx_cv_target_library_gl wx_cv_target_libtype
+ wx_cv_target_library wx_cv_target_library_gl wx_cv_target_libtype \
+ wx_cv_library_basename wx_cv_release wx_cv_current wx_cv_revision wx_cv_age \
+ wx_cv_use_gui wx_cv_use_resources
subdirs="demos samples utils contrib"
trap 'rm -fr `echo "
wx-config
+ version-script
src/make.env
src/makeprog.env
src/makelib.env
s%@X_PRE_LIBS@%$X_PRE_LIBS%g
s%@X_LIBS@%$X_LIBS%g
s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
+s%@PANGOX_CFLAGS@%$PANGOX_CFLAGS%g
+s%@PANGOX_LIBS@%$PANGOX_LIBS%g
+s%@PANGOXFT_CFLAGS@%$PANGOXFT_CFLAGS%g
+s%@PANGOXFT_LIBS@%$PANGOXFT_LIBS%g
s%@AIX_CXX_LD@%$AIX_CXX_LD%g
s%@RESCOMP@%$RESCOMP%g
s%@DEREZ@%$DEREZ%g
s%@WX_RELEASE_NUMBER@%$WX_RELEASE_NUMBER%g
s%@WX_LIBRARY_NAME_STATIC@%$WX_LIBRARY_NAME_STATIC%g
s%@WX_LIBRARY_NAME_SHARED@%$WX_LIBRARY_NAME_SHARED%g
+s%@WX_LIBRARY_BASENAME@%$WX_LIBRARY_BASENAME%g
s%@WX_LIBRARY_IMPORTLIB@%$WX_LIBRARY_IMPORTLIB%g
s%@WX_TARGET_LIBRARY@%$WX_TARGET_LIBRARY%g
s%@WX_LIBRARY_LINK1@%$WX_LIBRARY_LINK1%g
s%@WXDEBUG_DEFINE@%$WXDEBUG_DEFINE%g
s%@USE_GUI@%$USE_GUI%g
s%@AFMINSTALL@%$AFMINSTALL%g
+s%@WIN32INSTALL@%$WIN32INSTALL%g
s%@TOOLKIT@%$TOOLKIT%g
s%@TOOLKIT_DIR@%$TOOLKIT_DIR%g
s%@TOOLKIT_VPATH@%$TOOLKIT_VPATH%g
s%@WXCONFIG_LIBS_STATIC_GL@%$WXCONFIG_LIBS_STATIC_GL%g
s%@WXCONFIG_INCLUDE@%$WXCONFIG_INCLUDE%g
s%@WXCONFIG_RPATH@%$WXCONFIG_RPATH%g
+s%@WX_LARGEFILE_FLAGS@%$WX_LARGEFILE_FLAGS%g
s%@ALL_OBJECTS@%$ALL_OBJECTS%g
s%@ALL_HEADERS@%$ALL_HEADERS%g
s%@ALL_SOURCES@%$ALL_SOURCES%g
s%@DISTDIR@%$DISTDIR%g
s%@SAMPLES_SUBDIRS@%$SAMPLES_SUBDIRS%g
s%@LDFLAGS_GL@%$LDFLAGS_GL%g
+s%@LDFLAGS_VERSIONING@%$LDFLAGS_VERSIONING%g
s%@LDFLAGS_EXE@%$LDFLAGS_EXE%g
s%@OPENGL_LIBS@%$OPENGL_LIBS%g
s%@DMALLOC_LIBS@%$DMALLOC_LIBS%g
s%@EXTRADEFS@%$EXTRADEFS%g
+s%@WX_VERSION_TAG@%$WX_VERSION_TAG%g
s%@RESFLAGS@%$RESFLAGS%g
s%@RESPROGRAMOBJ@%$RESPROGRAMOBJ%g
s%@WX_RESOURCES_MACOSX_ASCII@%$WX_RESOURCES_MACOSX_ASCII%g
s%@LIBWXMACRES@%$LIBWXMACRES%g
s%@LIBWXMACRESCOMP@%$LIBWXMACRESCOMP%g
s%@LIBWXMACRESWXCONFIG@%$LIBWXMACRESWXCONFIG%g
+s%@GCC@%$GCC%g
s%@DLLTOOL@%$DLLTOOL%g
s%@AS@%$AS%g
s%@NM@%$NM%g
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"wx-config
+ version-script
src/make.env
src/makeprog.env
src/makelib.env
fi
+echo
+echo "Configured wxWindows ${WX_VERSION} for \`${host}'"
+echo ""
+echo " Which GUI toolkit should wxWindows use? ${TOOLKIT:-base only}"
+
+echo " Should wxWindows be compiled in debug mode? ${wxUSE_DEBUG:-no}"
+echo " Should wxWindows be linked as a shared library? ${wxUSE_SHARED:-no}"
+echo " Should wxWindows be compiled in Unicode mode? ${wxUSE_UNICODE:-no}"
+
+echo " Which libraries should wxWindows use?"
+echo " jpeg ${wxUSE_LIBJPEG-none}"
+echo " png ${wxUSE_LIBPNG-none}"
+echo " regex ${wxUSE_REGEX}"
+echo " tiff ${wxUSE_LIBTIFF-none}"
+echo " zlib ${wxUSE_ZLIB}"
+
+echo ""
+
projects / wxWidgets.git / blobdiff