+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% Name: socket.tex
+%% Purpose: wxSocket docs
+%% Author: Guillermo Rodriguez Garcia <guille@iies.es>
+%% Modified by:
+%% Created: 1999
+%% RCS-ID: $Id$
+%% Copyright: (c) wxWindows team
+%% License: wxWindows license
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\section{\class{wxSocketBase}}\label{wxsocketbase}
+wxSocketBase is the base class for all socket-related objects, and it
+defines all basic IO functionality.
+
\wxheading{Derived from}
-\helpref{wxEvtHandler}{wxevthandler}
+\helpref{wxObject}{wxobject}
+
+\wxheading{Include files}
+
+<wx/socket.h>
+
+\wxheading{wxSocket errors}
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSOCKET\_NOERROR}}{No error happened.}
+\twocolitem{{\bf wxSOCKET\_INVOP}}{Invalid operation.}
+\twocolitem{{\bf wxSOCKET\_IOERR}}{Input/Output error.}
+\twocolitem{{\bf wxSOCKET\_INVADDR}}{Invalid address passed to wxSocket.}
+\twocolitem{{\bf wxSOCKET\_INVSOCK}}{Invalid socket (uninitialized).}
+\twocolitem{{\bf wxSOCKET\_NOHOST}}{No corresponding host.}
+\twocolitem{{\bf wxSOCKET\_INVPORT}}{Invalid port.}
+\twocolitem{{\bf wxSOCKET\_WOULDBLOCK}}{The socket is non-blocking and the operation would block.}
+\twocolitem{{\bf wxSOCKET\_TIMEDOUT}}{The timeout for this operation expired.}
+\twocolitem{{\bf wxSOCKET\_MEMERR}}{Memory exhausted.}
+\end{twocollist}
+
+\wxheading{wxSocket events}
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSOCKET\_INPUT}}{There is data available for reading.}
+\twocolitem{{\bf wxSOCKET\_OUTPUT}}{The socket is ready to be written to.}
+\twocolitem{{\bf wxSOCKET\_CONNECTION}}{Incoming connection request (server), or successful connection establishment (client).}
+\twocolitem{{\bf wxSOCKET\_LOST}}{The connection has been closed.}
+\end{twocollist}
+
+A brief note on how to use these events:
+
+The {\bf wxSOCKET\_INPUT} event will be issued whenever there is data
+available for reading. This will be the case if the input queue was
+empty and new data arrives, or if the application has read some data
+yet there is still more data available. This means that the application
+does not need to read all available data in response to a
+{\bf wxSOCKET\_INPUT} event, as more events will be produced as
+necessary.
+
+The {\bf wxSOCKET\_OUTPUT} event is issued when a socket is first
+connected with \helpref{Connect}{wxsocketclientconnect} or accepted
+with \helpref{Accept}{wxsocketserveraccept}. After that, new
+events will be generated only after an output operation fails
+with {\bf wxSOCKET\_WOULDBLOCK} and buffer space becomes available
+again. This means that the application should assume that it
+can write data to the socket until an {\bf wxSOCKET\_WOULDBLOCK}
+error occurs; after this, whenever the socket becomes writable
+again the application will be notified with another
+{\bf wxSOCKET\_OUTPUT} event.
+
+The {\bf wxSOCKET\_CONNECTION} event is issued when a delayed connection
+request completes succesfully (client) or when a new connection arrives
+at the incoming queue (server).
+
+The {\bf wxSOCKET\_LOST} event is issued when a close indication is
+received for the socket. This means that the connection broke down or
+that it was closed by the peer. Also, this event will be issued if
+a connection request fails.
-% ---------------------------------------------------------------------------
-% Event handling
-% ---------------------------------------------------------------------------
\wxheading{Event handling}
-To process events from a socket, use the following event handler macro to direct
- input to member
-functions that take a \helpref{wxSocketEvent}{wxsocketevent} argument.
+To process events coming from a socket object, use the following event
+handler macro to direct events to member functions that take
+a \helpref{wxSocketEvent}{wxsocketevent} argument.
\twocolwidtha{7cm}%
\begin{twocollist}\itemsep=0pt
-\twocolitem{{\bf EVT\_SOCKET(id, func)}}{A socket event occured.}
-\end{twocollist}%
+\twocolitem{{\bf EVT\_SOCKET(id, func)}}{Process a wxEVT\_SOCKET event.}
+\end{twocollist}
+
+\wxheading{See also}
+
+\helpref{wxSocketEvent}{wxsocketevent},
+\helpref{wxSocketClient}{wxsocketclient},
+\helpref{wxSocketServer}{wxsocketserver},
+\helpref{Sockets sample}{samplesockets}
% ---------------------------------------------------------------------------
-% See also ...
+% Function groups
% ---------------------------------------------------------------------------
-\wxheading{See also}
-\helpref{wxSocketEvent}{wxsocketevent}\\
-\helpref{wxSocketClient}{wxsocketclient}\\
-\helpref{wxSocketServer}{wxsocketserver}
+\latexignore{\rtfignore{\wxheading{Function groups}}}
+
+\membersection{Construction and destruction}
+
+\helpref{wxSocketBase}{wxsocketbaseconstruct}\\
+\helpref{\destruct{wxSocketBase}}{wxsocketbasedestruct}\\
+\helpref{Destroy}{wxsocketbasedestroy}
+
+\membersection{Socket state}
+
+Functions to retrieve current state and miscellaneous info.
+
+\helpref{Error}{wxsocketbaseerror}\\
+\helpref{GetLocal}{wxsocketbasegetlocal}\\
+\helpref{GetPeer}{wxsocketbasegetpeer}
+\helpref{IsConnected}{wxsocketbaseisconnected}\\
+\helpref{IsData}{wxsocketbaseisdata}\\
+\helpref{IsDisconnected}{wxsocketbaseisdisconnected}\\
+\helpref{LastCount}{wxsocketbaselastcount}\\
+\helpref{LastError}{wxsocketbaselasterror}\\
+\helpref{Ok}{wxsocketbaseok}\\
+\helpref{SaveState}{wxsocketbasesavestate}\\
+\helpref{RestoreState}{wxsocketbaserestorestate}
+
+\membersection{Basic IO}
+
+Functions that perform basic IO functionality.
+
+\helpref{Close}{wxsocketbaseclose}\\
+\helpref{Discard}{wxsocketbasediscard}\\
+\helpref{Peek}{wxsocketbasepeek}\\
+\helpref{Read}{wxsocketbaseread}\\
+\helpref{ReadMsg}{wxsocketbasereadmsg}\\
+\helpref{Unread}{wxsocketbaseunread}\\
+\helpref{Write}{wxsocketbasewrite}\\
+\helpref{WriteMsg}{wxsocketbasewritemsg}
+
+Functions that perform a timed wait on a certain IO condition.
+
+\helpref{InterruptWait}{wxsocketbaseinterruptwait}\\
+\helpref{Wait}{wxsocketbasewait}\\
+\helpref{WaitForLost}{wxsocketbasewaitforlost}\\
+\helpref{WaitForRead}{wxsocketbasewaitforread}\\
+\helpref{WaitForWrite}{wxsocketbasewaitforwrite}\\
+
+and also:
+
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept}\\
+\helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect}
+
+Functions that allow applications to customize socket IO as needed.
+
+\helpref{GetFlags}{wxsocketbasegetflags}\\
+\helpref{SetFlags}{wxsocketbasesetflags}\\
+\helpref{SetTimeout}{wxsocketbasesettimeout}
+
+\membersection{Handling socket events}
+
+Functions that allow applications to receive socket events.
+
+\helpref{Notify}{wxsocketbasenotify}\\
+\helpref{SetNotify}{wxsocketbasesetnotify}\\
+\helpref{GetClientData}{wxsocketbasegetclientdata}\\
+\helpref{SetClientData}{wxsocketbasesetclientdata}\\
+\helpref{SetEventHandler}{wxsocketbaseseteventhandler}
+
+Callback functions are also available, but they are provided for backwards
+compatibility only. Their use is strongly discouraged in favour of events,
+and should be considered deprecated. Callbacks may be unsupported in future
+releases of wxWindows.
+
+\helpref{Callback}{wxsocketbasecallback}\\
+\helpref{CallbackData}{wxsocketbasecallbackdata}
+
% ---------------------------------------------------------------------------
-% Members
+% Members here
% ---------------------------------------------------------------------------
-\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxSocketBase::wxSocketBase}
+\helponly{\insertatlevel{2}{
+
+\wxheading{Members}
+
+}}
+
+\membersection{wxSocketBase::wxSocketBase}\label{wxsocketbaseconstruct}
\func{}{wxSocketBase}{\void}
-Default constructor but don't use it, you must use \helpref{wxSocketClient}{wxsocketclient}
-or \helpref{wxSocketServer}{wxsocketserver}.
+Default constructor. Don't use it directly; instead, use
+\helpref{wxSocketClient}{wxsocketclient} to construct a socket client, or
+\helpref{wxSocketServer}{wxsocketserver} to construct a socket server.
-\membersection{wxSocketBase::\destruct{wxSocketBase}}
+\membersection{wxSocketBase::\destruct{wxSocketBase}}\label{wxsocketbasedestruct}
\func{}{\destruct{wxSocketBase}}{\void}
-Destroys the wxSocketBase object.
+Destructor. Do not destroy a socket using the delete operator directly;
+use \helpref{Destroy}{wxsocketbasedestroy} instead. Also, do not create
+socket objects in the stack.
-% ---------------------------------------------------------------------------
-% State functions
-% ---------------------------------------------------------------------------
+%
+% Callback
+%
+\membersection{wxSocketBase::Callback}\label{wxsocketbasecallback}
-\membersection{wxSocketBase::Ok}\label{wxsocketbaseok}
+\func{wxSocketBase::wxSockCbk}{Callback}{\param{wxSocketBase::wxSockCbk}{ callback}}
-\constfunc{bool}{Ok}{\void}
+You can setup a callback function to be called when an event occurs.
+The function will be called only for those events for which notification
+has been enabled with \helpref{Notify}{wxsocketbasenotify} and
+\helpref{SetNotify}{wxsocketbasesetnotify}. The prototype of the
+callback must be as follows:
-Returns TRUE if the socket is initialized and ready and FALSE in other
-cases.
+\begin{verbatim}
+void SocketCallback(wxSocketBase& sock, wxSocketNotify evt, char *cdata);
+\end{verbatim}
+
+The first parameter is a reference to the socket object in which the
+event occurred. The second parameter tells you which event occurred.
+(See \helpref{wxSocket events}{wxsocketbase}). The third parameter
+is the user data you specified using \helpref{CallbackData}{wxsocketbasecallbackdata}.
+\wxheading{Return value}
+
+A pointer to the previous callback.
+
+\wxheading{Remark/Warning}
+
+Note that callbacks are now deprecated and unsupported, and they remain
+for backwards compatibility only. Use events instead.
+
+\wxheading{See also}
+
+\helpref{wxSocketBase::CallbackData}{wxsocketbasecallbackdata},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify}
+
+%
+% CallbackData
+%
+\membersection{wxSocketBase::CallbackData}\label{wxsocketbasecallbackdata}
+
+\func{char *}{CallbackData}{\param{char *}{cdata}}
+
+This function sets the the user data which will be passed to a
+callback function set via \helpref{Callback}{wxsocketbasecallback}.
+
+\wxheading{Return value}
+
+A pointer to the previous user data.
+
+\wxheading{Remark/Warning}
+
+Note that callbacks are now deprecated and unsupported, and they remain
+for backwards compatibility only. Use events instead.
+
+\wxheading{See also}
+
+\helpref{wxSocketBase::Callback}{wxsocketbasecallback},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify}
+
+%
+% Close
+%
+\membersection{wxSocketBase::Close}\label{wxsocketbaseclose}
+
+\func{void}{Close}{\void}
+
+This function shuts down the socket, disabling further transmission and
+reception of data; it also disables events for the socket and frees the
+associated system resources. Upon socket destruction, Close is automatically
+called, so in most cases you won't need to do it yourself, unless you
+explicitly want to shut down the socket, typically to notify the peer
+that you are closing the connection.
+
+\wxheading{Remark/Warning}
+
+Although Close immediately disables events for the socket, it is possible
+that event messages may be waiting in the application's event queue. The
+application must therefore be prepared to handle socket event messages
+even after calling Close.
+
+%
+% Destroy
+%
+\membersection{wxSocketBase::Destroy}\label{wxsocketbasedestroy}
+
+\func{bool}{Destroy}{\void}
+
+Destroys the socket safely. Use this function instead of the delete operator,
+since otherwise socket events could reach the application even after the
+socket has been destroyed. To prevent this problem, this function appends
+the wxSocket to a list of object to be deleted on idle time, after all
+events have been processed. For the same reason, you should avoid creating
+socket objects in the stack.
+
+Destroy calls \helpref{Close}{wxsocketbaseclose} automatically.
+
+\wxheading{Return value}
+
+Always TRUE.
+
+%
+% Discard
+%
+\membersection{wxSocketBase::Discard}\label{wxsocketbasediscard}
+
+\func{wxSocketBase\&}{Discard}{\void}
+
+This function simply deletes all bytes in the incoming queue. This function
+always returns immediately and its operation is not affected by IO flags.
+
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually discarded.
+
+If you use \helpref{Error}{wxsocketbaseerror}, it will always return FALSE.
+
+%
+% Error
+%
\membersection{wxSocketBase::Error}\label{wxsocketbaseerror}
\constfunc{bool}{Error}{\void}
-Returns TRUE if an error occured.
+Returns TRUE if an error occurred in the last IO operation.
+
+Use this function to check for an error condition after one of the
+following calls: Discard, Peek, Read, ReadMsg, Unread, Write, WriteMsg.
-\membersection{wxSocketBase::IsConnected}\label{wxsocketbaseconnected}
+%
+% GetClientData
+%
+\membersection{wxSocketBase::GetClientData}\label{wxsocketbasegetclientdata}
+
+\constfunc{void *}{GetClientData}{\void}
+
+Returns a pointer of the client data for this socket, as set with
+\helpref{SetClientData}{wxsocketbasesetclientdata}
+
+%
+% GetLocal
+%
+\membersection{wxSocketBase::GetLocal}\label{wxsocketbasegetlocal}
+
+\constfunc{bool}{GetLocal}{\param{wxSockAddress\& }{addr}}
+
+This function returns the local address field of the socket. The local
+address field contains the complete local address of the socket (local
+address, local port, ...).
+
+\wxheading{Return value}
+
+TRUE if no error happened, FALSE otherwise.
+
+%
+% GetFlags
+%
+\membersection{wxSocketBase::GetFlags}\label{wxsocketbasegetflags}
+
+\constfunc{wxSocketFlags}{GetFlags}{\void}
+
+Returns current IO flags, as set with \helpref{SetFlags}{wxsocketbasesetflags}
+
+%
+% GetPeer
+%
+\membersection{wxSocketBase::GetPeer}\label{wxsocketbasegetpeer}
+
+\constfunc{bool}{GetPeer}{\param{wxSockAddress\& }{addr}}
+
+This function returns the peer address field of the socket. The peer
+address field contains the complete peer host address of the socket
+(address, port, ...).
+
+\wxheading{Return value}
+
+TRUE if no error happened, FALSE otherwise.
+
+%
+% InterruptWait
+%
+\membersection{wxSocketBase::InterruptWait}\label{wxsocketbaseinterruptwait}
+
+\func{void}{InterruptWait}{\void}
+
+Use this function to interrupt any wait operation currently in progress.
+Note that this is not intended as a regular way to interrupt a Wait call,
+but only as an escape mechanism for exceptional situations where it is
+absolutely necessary to use it, for example to abort an operation due to
+some exception or abnormal problem. InterruptWait is automatically called
+when you \helpref{Close}{wxsocketbaseclose} a socket (and thus also upon
+socket destruction), so you don't need to use it in these cases.
+
+\helpref{wxSocketBase::Wait}{wxsocketbasewait},
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost},
+\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
+\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
+\helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect}
+
+%
+% IsConnected
+%
+\membersection{wxSocketBase::IsConnected}\label{wxsocketbaseisconnected}
\constfunc{bool}{IsConnected}{\void}
Returns TRUE if the socket is connected.
+%
+% IsData
+%
\membersection{wxSocketBase::IsData}\label{wxsocketbaseisdata}
\constfunc{bool}{IsData}{\void}
-Returns TRUE if some data is arrived on the socket.
+This function waits until the socket is readable. This might mean that
+queued data is available for reading or, for streamed sockets, that
+the connection has been closed, so that a read operation will complete
+immediately without blocking (unless the {\bf wxSOCKET\_WAITALL} flag
+is set, in which case the operation might still block).
-\membersection{wxSocketBase::IsDisconnected}\label{wxsocketbasedisconnected}
+\membersection{wxSocketBase::IsDisconnected}\label{wxsocketbaseisdisconnected}
+%
+% IsDisconnected
+%
\constfunc{bool}{IsDisconnected}{\void}
-Returns TRUE if the socket is disconnected.
-
-\membersection{wxSocketBase::IsNoWait}\label{wxsocketbasenowait}
-
-\constfunc{bool}{IsNoWait}{\void}
-
-Returns TRUE if the socket mustn't wait.
+Returns TRUE if the socket is not connected.
\membersection{wxSocketBase::LastCount}\label{wxsocketbaselastcount}
-\constfunc{size\_t}{LastCount}{\void}
+%
+% LastCount
+%
+\constfunc{wxUint32}{LastCount}{\void}
Returns the number of bytes read or written by the last IO call.
+Use this function to get the number of bytes actually transferred
+after using one of the following IO calls: Discard, Peek, Read,
+ReadMsg, Unread, Write, WriteMsg.
+
+%
+% LastError
+%
\membersection{wxSocketBase::LastError}\label{wxsocketbaselasterror}
-\constfunc{int}{LastError}{\void}
+\constfunc{wxSocketError}{LastError}{\void}
-Returns an error in the errno format (see your C programmer's guide).
+Returns the last wxSocket error. See \helpref{wxSocket errors}{wxsocketbase}.
+
+Please note that this function merely returns the last error code,
+but it should not be used to determine if an error has occurred (this
+is because successful operations do not change the LastError value).
+Use \helpref{Error}{wxsocketbaseerror} first, in order to determine
+if the last IO call failed. If this returns TRUE, use LastError
+to discover the cause of the error.
-% ---------------------------------------------------------------------------
-% IO calls
-% ---------------------------------------------------------------------------
%
-% Peek
+% Notify
%
-\membersection{wxSocketBase::Peek}\label{wxsocketbasepeek}
+\membersection{wxSocketBase::Notify}\label{wxsocketbasenotify}
-\func{wxSocketBase\&}{Peek}{\param{char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{void}{Notify}{\param{bool}{ notify}}
-This function peeks a buffer of {\it nbytes} bytes from the socket. Peeking a buffer
-doesn't delete it from the system socket in-queue.
+According to the {\it notify} value, this function enables
+or disables socket events. If {\it notify} is TRUE, the events
+configured with \helpref{SetNotify}{wxsocketbasesetnotify} will
+be sent to the application. If {\it notify} is FALSE; no events
+will be sent.
-\wxheading{Parameters}
+%
+% Ok
+%
+\membersection{wxSocketBase::Ok}\label{wxsocketbaseok}
-\docparam{buffer}{Buffer where to put peeked data.}
+\constfunc{bool}{Ok}{\void}
-\docparam{nbytes}{Number of bytes.}
+Returns TRUE if the socket is initialized and ready and FALSE in other
+cases.
-\wxheading{Return value}
+\wxheading{Remark/Warning}
-Returns a reference to the current object.
+For \helpref{wxSocketClient}{wxsocketclient}, Ok won't return TRUE unless
+the client is connected to a server.
+
+For \helpref{wxSocketServer}{wxsocketserver}, Ok will return TRUE if the
+server could bind to the specified address and is already listening for
+new connections.
+
+Ok does not check for IO errors;
+use \helpref{Error}{wxsocketbaseerror} instead for that purpose.
+
+%
+% RestoreState
+%
+\membersection{wxSocketBase::RestoreState}\label{wxsocketbaserestorestate}
+
+\func{void}{RestoreState}{\void}
+
+This function restores the previous state of the socket, as saved
+with \helpref{SaveState}{wxsocketbasesavestate}
+
+Calls to SaveState and RestoreState can be nested.
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaseerror}\\
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount}\\
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
+\helpref{wxSocketBase::SaveState}{wxsocketbasesavestate}
%
-% Read
+% SaveState
%
-\membersection{wxSocketBase::Read}\label{wxsocketbaseread}
+\membersection{wxSocketBase::SaveState}\label{wxsocketbasesavestate}
-\func{wxSocketBase\&}{Read}{\param{char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{void}{SaveState}{\void}
-This function reads a buffer of {\it nbytes} bytes from the socket.
+This function saves the current state of the socket in a stack. Socket
+state includes flags, as set with \helpref{SetFlags}{wxsocketbasesetflags},
+event mask, as set with \helpref{SetNotify}{wxsocketbasesetnotify} and
+\helpref{Notify}{wxsocketbasenotify}, user data, as set with
+\helpref{SetClientData}{wxsocketbasesetclientdata}, and asynchronous
+callback settings, as set with \helpref{Callback}{wxsocketbasecallback}
+and \helpref{CallbackData}{wxsocketbasecallbackdata}.
-\wxheading{Parameters}
+Calls to SaveState and RestoreState can be nested.
-\docparam{buffer}{Buffer where to put read data.}
+\wxheading{See also}
-\docparam{nbytes}{Number of bytes.}
+\helpref{wxSocketBase::RestoreState}{wxsocketbaserestorestate}
-\wxheading{Return value}
+%
+% SetClientData
+%
+\membersection{wxSocketBase::SetClientData}\label{wxsocketbasesetclientdata}
-Returns a reference to the current object.
+\func{void}{SetClientData}{\param{void *}{data}}
-\wxheading{Remark/Warning}
+Sets user-supplied client data for this socket. All socket events will
+contain a pointer to this data, which can be retrieved with
+the \helpref{wxSocketEvent::GetClientData}{wxsocketeventgetclientdata} function.
-By default, Read uses an internal asynchronous manager: it will send data when
-the socket requests them. It is particularly interesting when you enter a long
-data transfer (e.g. a big file, an image, ...). But it is also buggy when you
-simply discuss with the peer using user data. In this case, wxSocket prepares
-itself to send data (Write wait for them to be sent) and during a GUI refresh
-the user enters new data, which involves a new Read call though the previous
-isn't finished. Well, in most cases it can work but it might fail too.
-So I advise you to use the SPEED flag, which disables the asynchronous manager,
-when you just want to discuss with the peer.
+%
+% SetEventHandler
+%
+\membersection{wxSocketBase::SetEventHandler}\label{wxsocketbaseseteventhandler}
+
+\func{void}{SetEventHandler}{\param{wxEvtHandler\&}{ handler}, \param{int}{ id = -1}}
-This remark is also valid for all IO call.
+Sets an event handler to be called when a socket event occurs. The
+handler will be called for those events for which notification is
+enabled with \helpref{SetNotify}{wxsocketbasesetnotify} and
+\helpref{Notify}{wxsocketbasenotify}.
+
+\wxheading{Parameters}
+
+\docparam{handler}{Specifies the event handler you want to use.}
+
+\docparam{id}{The id of socket event.}
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaseerror},
- \helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
- \helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
-
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
+\helpref{wxSocketEvent}{wxsocketevent},
+\helpref{wxEvtHandler}{wxevthandler}
+
+%
+% SetFlags
+%
\membersection{wxSocketBase::SetFlags}\label{wxsocketbasesetflags}
-\func{void}{SetFlags}{\param{wxSockFlags}{ flags}}
+\func{void}{SetFlags}{\param{wxSocketFlags}{ flags}}
+
+Use SetFlags to customize IO operation for this socket.
+The {\it flags} parameter may be a combination of flags ORed toghether.
+The following flags can be used:
\twocolwidtha{7cm}
\begin{twocollist}\itemsep=0pt
-\twocolitem{{\bf wxSocketBase::NONE}}{Normal functionnalities.}
-\twocolitem{{\bf wxSocketBase::NOWAIT}}{Get the available data in the input queue and exit immediately.}
-\twocolitem{{\bf wxSocketBase::WAITALL}}{Wait for all required data unless an error occured.}
-\twocolitem{{\bf wxSocketBase::SPEED}}{Disable the asynchronous IO functionnality.}
+\twocolitem{{\bf wxSOCKET\_NONE}}{Normal functionality.}
+\twocolitem{{\bf wxSOCKET\_NOWAIT}}{Read/write as much data as possible and return immediately.}
+\twocolitem{{\bf wxSOCKET\_WAITALL}}{Wait for all required data to be read/written unless an error occurs.}
+\twocolitem{{\bf wxSOCKET\_BLOCK}}{Block the GUI (do not yield) while reading/writing data.}
\end{twocollist}
+A brief overview on how to use these flags follows.
+
+If no flag is specified (this is the same as {\bf wxSOCKET\_NONE}),
+IO calls will return after some data has been read or written, even
+when the transfer might not be complete. This is the same as issuing
+exactly one blocking low-level call to recv() or send(). Note
+that {\it blocking} here refers to when the function returns, not
+to whether the GUI blocks during this time.
+
+If {\bf wxSOCKET\_NOWAIT} is specified, IO calls will return immediately.
+Read operations will retrieve only available data. Write operations will
+write as much data as possible, depending on how much space is available
+in the output buffer. This is the same as issuing exactly one nonblocking
+low-level call to recv() or send(). Note that {\it nonblocking} here
+refers to when the function returns, not to whether the GUI blocks during
+this time.
+
+If {\bf wxSOCKET\_WAITALL} is specified, IO calls won't return until ALL
+the data has been read or written (or until an error occurs), blocking if
+necessary, and issuing several low level calls if necessary. This is the
+same as having a loop which makes as many blocking low-level calls to
+recv() or send() as needed so as to transfer all the data. Note
+that {\it blocking} here refers to when the function returns, not
+to whether the GUI blocks during this time.
+
+The {\bf wxSOCKET\_BLOCK} flag controls whether the GUI blocks during
+IO operations. If this flag is specified, the socket will not yield
+during IO calls, so the GUI will remain blocked until the operation
+completes. If it is not used, then the application must take extra
+care to avoid unwanted reentrance.
+
+So:
+
+{\bf wxSOCKET\_NONE} will try to read at least SOME data, no matter how much.
+
+{\bf wxSOCKET\_NOWAIT} will always return immediately, even if it cannot
+read or write ANY data.
+
+{\bf wxSOCKET\_WAITALL} will only return when it has read or written ALL
+the data.
+
+{\bf wxSOCKET\_BLOCK} has nothing to do with the previous flags and
+it controls whether the GUI blocks.
+
%
-% Read
+% SetNotify
%
-\membersection{wxSocketBase::Write}\label{wxsocketbasewrite}
+\membersection{wxSocketBase::SetNotify}\label{wxsocketbasesetnotify}
-\func{wxSocketBase\&}{Write}{\param{const char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{void}{SetNotify}{\param{wxSocketEventFlags}{ flags}}
-This function writes a buffer of {\it nbytes} bytes from the socket.
+SetNotify specifies which socket events are to be sent to the event handler.
+The {\it flags} parameter may be combination of flags ORed toghether. The
+following flags can be used:
-\wxheading{Remark/Warning}
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSOCKET\_INPUT\_FLAG}}{to receive wxSOCKET\_INPUT}
+\twocolitem{{\bf wxSOCKET\_OUTPUT\_FLAG}}{to receive wxSOCKET\_OUTPUT}
+\twocolitem{{\bf wxSOCKET\_CONNECTION\_FLAG}}{to receive wxSOCKET\_CONNECTION}
+\twocolitem{{\bf wxSOCKET\_LOST\_FLAG}}{to receive wxSOCKET\_LOST}
+\end{twocollist}
+
+For example:
+
+\begin{verbatim}
+ sock.SetNotify(wxSOCKET_INPUT_FLAG | wxSOCKET_LOST_FLAG);
+ sock.Notify(TRUE);
+\end{verbatim}
+
+In this example, the user will be notified about incoming socket data and
+whenever the connection is closed.
+
+For more information on socket events see \helpref{wxSocket events}{wxsocketbase}.
-By default, Write uses an internal asynchronous manager: it will send data when
-the socket requests them. It is particularly interesting when you enter a long
-data transfer (e.g. a big file, an image, ...). But it is also buggy when you
-simply discuss with the peer using user data. In this case, wxSocket prepares
-itself to send data (Write wait for them to be sent) and during a GUI refresh
-the user enters new data, which involves a new Write call though the previous
-isn't finished. Well, in most cases it can work but it might fail too.
-So I advise you to use the SPEED flag, which disables the asynchronous manager,
-when you just want to discuss with the peer.
+%
+% SetTimeout
+%
+\membersection{wxSocketBase::SetTimeout}\label{wxsocketbasesettimeout}
+
+\func{void}{SetTimeout}{\param{int }{seconds}}
+
+This function sets the default socket timeout in seconds. This timeout
+applies to all IO calls, and also to the \helpref{Wait}{wxsocketbasewait} family
+of functions if you don't specify a wait interval. Initially, the default
+timeout is 10 minutes.
+
+%
+% Peek
+%
+\membersection{wxSocketBase::Peek}\label{wxsocketbasepeek}
+
+\func{wxSocketBase\&}{Peek}{\param{void *}{ buffer}, \param{wxUint32}{ nbytes}}
+
+This function peeks a buffer of {\it nbytes} bytes from the socket.
+Peeking a buffer doesn't delete it from the socket input queue.
+
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually peeked.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
\wxheading{Parameters}
-\docparam{buffer}{Buffer where to get the data to write.}
+\docparam{buffer}{Buffer where to put peeked data.}
\docparam{nbytes}{Number of bytes.}
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+The exact behaviour of wxSocketBase::Peek depends on the combination
+of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaseerror}\\
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount}\\
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
%
-% WriteMsg
+% Read
%
-\membersection{wxSocketBase::WriteMsg}\label{wxsocketbasewritemsg}
+\membersection{wxSocketBase::Read}\label{wxsocketbaseread}
-\func{wxSocketBase\&}{WriteMsg}{\param{const char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{wxSocketBase\&}{Read}{\param{void *}{ buffer}, \param{wxUint32}{ nbytes}}
-This function writes a buffer of {\it nbytes} bytes from the socket. But it
-writes a short header before so that ReadMsg can alloc the right size for
-the buffer. So a buffer sent with WriteMsg {\bf must} be read with ReadMsg.
+This function reads a buffer of {\it nbytes} bytes from the socket.
+
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually read.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
\wxheading{Parameters}
-\docparam{buffer}{Buffer where to put data peeked.}
+\docparam{buffer}{Buffer where to put read data.}
\docparam{nbytes}{Number of bytes.}
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+The exact behaviour of wxSocketBase::Read depends on the combination
+of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaseerror}\\
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount}\\
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}\\
-\helpref{wxSocketBase::ReadMsg}{wxsocketbasereadmsg}
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
%
% ReadMsg
%
\membersection{wxSocketBase::ReadMsg}\label{wxsocketbasereadmsg}
-\func{wxSocketBase\&}{ReadMsg}{\param{char *}{ buffer}, \param{size\_t}{ nbytes}}
+\func{wxSocketBase\&}{ReadMsg}{\param{void *}{ buffer}, \param{wxUint32}{ nbytes}}
-This function reads a buffer sent by WriteMsg on a socket. If the buffer passed
-to the function isn't big enough, the function filled it and then discard the
-bytes left. This function always wait for the buffer to be entirely filled.
+This function reads a buffer sent by \helpref{WriteMsg}{wxsocketbasewritemsg}
+on a socket. If the buffer passed to the function isn't big enough, the
+remaining bytes will be discarded. This function always waits for the
+buffer to be entirely filled, unless an error occurs.
+
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually read.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
\wxheading{Parameters}
\docparam{buffer}{Buffer where to put read data.}
-\docparam{nbytes}{Number of bytes allocated for the buffer.}
+\docparam{nbytes}{Size of the buffer.}
\wxheading{Return value}
Returns a reference to the current object.
+\wxheading{Remark/Warning}
+
+wxSocketBase::ReadMsg will behave as if the {\bf wxSOCKET\_WAITALL} flag
+was always set and it will always ignore the {\bf wxSOCKET\_NOWAIT} flag.
+The exact behaviour of ReadMsg depends on the {\bf wxSOCKET\_BLOCK} flag.
+For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
+
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaseerror}\\
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount}\\
-\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}\\
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags},
\helpref{wxSocketBase::WriteMsg}{wxsocketbasewritemsg}
%
% Unread
%
-\membersection{wxSocketBase::UnRead}\label{wxsocketbaseunread}
+\membersection{wxSocketBase::Unread}\label{wxsocketbaseunread}
+
+\func{wxSocketBase\&}{Unread}{\param{const void *}{ buffer}, \param{wxUint32}{ nbytes}}
-\func{wxSocketBase\&}{UnRead}{\param{const char *}{ buffer}, \param{size\_t}{ nbytes}}
+This function unreads a buffer. That is, the data in the buffer is put back
+in the incoming queue. This function is not affected by wxSocket flags.
-This function unreads a buffer. It means that the buffer is put in the top
-of the incoming queue. But, it is put also at the end of all unread buffers.
-It is useful for sockets because we can't seek it.
+If you use \helpref{LastCount}{wxsocketbaselastcount}, it will always return {\it nbytes}.
+
+If you use \helpref{Error}{wxsocketbaseerror}, it will always return FALSE.
\wxheading{Parameters}
\wxheading{See also}
-\helpref{wxSocketBase::Error}{wxsocketbaseerror}\\
-\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount}\\
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
\helpref{wxSocketBase::LastError}{wxsocketbaselasterror}
%
-% Discard
+% Wait
%
-\membersection{wxSocketBase::Discard}\label{wxsocketbasediscard}
-
-\func{wxSocketBase\&}{Discard}{\void}
-
-This function simply deletes all bytes in the incoming queue. This function
-doesn't wait.
-
-% ---------------------------------------------------------------------------
-% Wait functions
-% ---------------------------------------------------------------------------
\membersection{wxSocketBase::Wait}\label{wxsocketbasewait}
-\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
+\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
-This function waits for an event: it could be an incoming byte, the possibility
-for the client to write, a lost connection, an incoming connection, an
-established connection.
+This function waits until any of the following conditions is TRUE:
+
+\begin{itemize}
+\item The socket becomes readable.
+\item The socket becomes writable.
+\item An ongoing connection request has completed (\helpref{wxSocketClient}{wxsocketclient} only)
+\item An incoming connection request has arrived (\helpref{wxSocketServer}{wxsocketserver} only)
+\item The connection has been closed.
+\end{itemize}
+
+Note that it is recommended to use the individual Wait functions
+to wait for the required condition, instead of this one.
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{millisecond}{Number of milliseconds to wait.}
\wxheading{Return value}
-Returns TRUE if an event occured, FALSE if the timeout was reached.
+Returns TRUE when any of the above conditions is satisfied,
+FALSE if the timeout was reached.
\wxheading{See also}
-\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread}\\
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite}\\
-\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost},
+\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
+\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
+\helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect}
%
-% WaitForRead
+% WaitForLost
%
-\membersection{wxSocketBase::WaitForRead}\label{wxsocketbasewaitforread}
+\membersection{wxSocketBase::WaitForLost}\label{wxsocketbasewaitforlost}
-\func{bool}{WaitForRead}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
+\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
-This function waits for a read event.
+This function waits until the connection is lost. This may happen if
+the peer gracefully closes the connection or if the connection breaks.
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{millisecond}{Number of milliseconds to wait.}
\wxheading{Return value}
-Returns TRUE if a byte arrived, FALSE if the timeout was reached.
+Returns TRUE if the connection was lost, FALSE if the timeout was reached.
\wxheading{See also}
-\helpref{wxSocketBase::Wait}{wxsocketbasewait}\\
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite}\\
-\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::Wait}{wxsocketbasewait}
%
-% WaitForWrite
+% WaitForRead
%
-\membersection{wxSocketBase::WaitForWrite}\label{wxsocketbasewaitforwrite}
+\membersection{wxSocketBase::WaitForRead}\label{wxsocketbasewaitforread}
-\func{bool}{WaitForWrite}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
+\func{bool}{WaitForRead}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
-This function waits for a write event.
+This function waits until the socket is readable. This might mean that
+queued data is available for reading or, for streamed sockets, that
+the connection has been closed, so that a read operation will complete
+immediately without blocking (unless the {\bf wxSOCKET\_WAITALL} flag
+is set, in which case the operation might still block).
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{millisecond}{Number of milliseconds to wait.}
\wxheading{Return value}
-Returns TRUE if a write event occured, FALSE if the timeout was reached.
+Returns TRUE if the socket becomes readable, FALSE on timeout.
\wxheading{See also}
-\helpref{wxSocketBase::Wait}{wxsocketbasewait}\\
-\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread}\\
-\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::Wait}{wxsocketbasewait}
%
-% WaitForLost
+% WaitForWrite
%
-\membersection{wxSocketBase::WaitForLost}\label{wxsocketbasewaitforlost}
+\membersection{wxSocketBase::WaitForWrite}\label{wxsocketbasewaitforwrite}
-\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ microsecond = 0}}
+\func{bool}{WaitForWrite}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
-This function waits for a "lost" event. For instance, the peer may have closed
-the connection, or the connection may have been broken.
+This function waits until the socket becomes writable. This might mean that
+the socket is ready to send new data, or for streamed sockets, that the
+connection has been closed, so that a write operation is guaranteed to
+complete immediately (unless the {\bf wxSOCKET\_WAITALL} flag is set,
+in which case the operation might still block).
\wxheading{Parameters}
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-\docparam{microsecond}{Number of microseconds to wait.}
+\docparam{millisecond}{Number of milliseconds to wait.}
\wxheading{Return value}
-Returns TRUE if a "lost" event occured, FALSE if the timeout was reached.
+Returns TRUE if the socket becomes writable, FALSE on timeout.
\wxheading{See also}
-\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread}\\
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite}\\
-\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::Wait}{wxsocketbasewait}
%
-% RestoreState
+% Write
%
-\membersection{wxSocketBase::RestoreState}\label{wxsocketbaserestorestate}
+\membersection{wxSocketBase::Write}\label{wxsocketbasewrite}
-\func{void}{RestoreState}{\void}
+\func{wxSocketBase\&}{Write}{\param{const void *}{ buffer}, \param{wxUint32}{ nbytes}}
+
+This function writes a buffer of {\it nbytes} bytes to the socket.
+
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually written.
+
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
+
+\wxheading{Parameters}
+
+\docparam{buffer}{Buffer with the data to be sent.}
+
+\docparam{nbytes}{Number of bytes.}
+
+\wxheading{Return value}
+
+Returns a reference to the current object.
+
+\wxheading{Remark/Warning}
-This function restores a previously saved state.
+The exact behaviour of wxSocketBase::Write depends on the combination
+of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
\wxheading{See also}
-\helpref{wxSocketBase::SaveState}{wxsocketbasesavestate}
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}
-% ---------------------------------------------------------------------------
-% Socket state
-% ---------------------------------------------------------------------------
%
-% SaveState
+% WriteMsg
%
-\membersection{wxSocketBase::SaveState}\label{wxsocketbasesavestate}
+\membersection{wxSocketBase::WriteMsg}\label{wxsocketbasewritemsg}
-\func{void}{SaveState}{\void}
+\func{wxSocketBase\&}{WriteMsg}{\param{const void *}{ buffer}, \param{wxUint32}{ nbytes}}
-This function saves the current state of the socket object in a stack:
-actually it saves all flags and the state of the asynchronous callbacks.
+This function writes a buffer of {\it nbytes} bytes from the socket, but it
+writes a short header before so that \helpref{ReadMsg}{wxsocketbasereadmsg}
+knows how much data should it actually read. So, a buffer sent with WriteMsg
+{\bf must} be read with ReadMsg. This function always waits for the entire
+buffer to be sent, unless an error occurs.
-\wxheading{See also}
+Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually written.
-\helpref{wxSocketBase::RestoreState}{wxsocketbaserestorestate}
+Use \helpref{Error}{wxsocketbaseerror} to determine if the operation succeeded.
-% ---------------------------------------------------------------------------
-% Socket callbacks
-% ---------------------------------------------------------------------------
-\membersection{wxSocketBase::SetEventHandler}\label{wxsocketbaseseteventhandler}
+\wxheading{Parameters}
-\func{void}{SetEventHandler}{\param{wxEvtHandler\&}{ evt\_hdlr}, \param{int}{ id = -1}}
+\docparam{buffer}{Buffer with the data to be sent.}
-Sets an event handler to be called when a socket event occured.
+\docparam{nbytes}{Number of bytes to send.}
-\wxheading{Parameters}
+\wxheading{Return value}
-\docparam{evt\_hdlr}{Specifies the event handler you want to use.}
+Returns a reference to the current object.
-\docparam{id}{The id of socket event.}
+\wxheading{Remark/Warning}
+
+wxSocketBase::WriteMsg will behave as if the {\bf wxSOCKET\_WAITALL} flag
+was always set and it will always ignore the {\bf wxSOCKET\_NOWAIT} flag.
+The exact behaviour of WriteMsg depends on the {\bf wxSOCKET\_BLOCK} flag.
+For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags}.
\wxheading{See also}
-\helpref{wxSocketEvent}{wxsocketevent}
+\helpref{wxSocketBase::Error}{wxsocketbaseerror},
+\helpref{wxSocketBase::LastError}{wxsocketbaselasterror},
+\helpref{wxSocketBase::LastCount}{wxsocketbaselastcount},
+\helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags},
+\helpref{wxSocketBase::ReadMsg}{wxsocketbasereadmsg}
+
% ---------------------------------------------------------------------------
% CLASS wxSocketClient
% ---------------------------------------------------------------------------
+
\section{\class{wxSocketClient}}\label{wxsocketclient}
\wxheading{Derived from}
\helpref{wxSocketBase}{wxsocketbase}
+\wxheading{Include files}
+
+<wx/socket.h>
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
% ---------------------------------------------------------------------------
% Members
% ---------------------------------------------------------------------------
%
\membersection{wxSocketClient::wxSocketClient}
-\func{}{wxSocketClient}{\param{wxSockFlags}{ flags = wxSocketBase::NONE}}
+\func{}{wxSocketClient}{\param{wxSocketFlags}{ flags = wxSOCKET\_NONE}}
-Constructs a new wxSocketClient.
-
-{\bf Warning !} The created socket client needs to be registered to a socket handler (See \helpref{wxSocketHandler}{wxsockethandler}).
+Constructor.
\wxheading{Parameters}
\func{}{\destruct{wxSocketClient}}{\void}
-Destructs a wxSocketClient object.
+Destructor. Please see \helpref{wxSocketBase::Destroy}{wxsocketbasedestroy}.
%
% Connect
\func{bool}{Connect}{\param{wxSockAddress\&}{ address}, \param{bool}{ wait = TRUE}}
-Connects to a server using the specified address. If {\it wait} is TRUE, Connect
-will wait for the socket ready to send or receive data.
+Connects to a server using the specified address.
+
+If {\it wait} is TRUE, Connect will wait until the connection
+completes. {\bf Warning:} This will block the GUI.
+
+If {\it wait} is FALSE, Connect will try to establish the connection and
+return immediately, without blocking the GUI. When used this way, even if
+Connect returns FALSE, the connection request can be completed later.
+To detect this, use \helpref{WaitOnConnect}{wxsocketclientwaitonconnect},
+or catch {\bf wxSOCKET\_CONNECTION} events (for successful establishment)
+and {\bf wxSOCKET\_LOST} events (for connection failure).
\wxheading{Parameters}
\docparam{address}{Address of the server.}
-\docparam{wait}{If true, waits for the connection to be ready.}
+\docparam{wait}{If TRUE, waits for the connection to complete.}
\wxheading{Return value}
Returns TRUE if the connection is established and no error occurs.
+If {\it wait} was TRUE, and Connect returns FALSE, an error occurred
+and the connection failed.
+
+If {\it wait} was FALSE, and Connect returns FALSE, you should still
+be prepared to handle the completion of this connection request, either
+with \helpref{WaitOnConnect}{wxsocketclientwaitonconnect} or by
+watching {\bf wxSOCKET\_CONNECTION} and {\bf wxSOCKET\_LOST} events.
+
\wxheading{See also}
-\helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect}
+\helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify}
%
% WaitOnConnect
%
\membersection{wxSocketClient::WaitOnConnect}\label{wxsocketclientwaitonconnect}
-\func{bool}{WaitOnConnect}{\param{long}{ seconds = -1}, \param{long}{ microseconds = 0}}
+\func{bool}{WaitOnConnect}{\param{long}{ seconds = -1}, \param{long}{ milliseconds = 0}}
+
+Wait until a connection request completes, or until the specified timeout
+elapses. Use this function after issuing a call
+to \helpref{Connect}{wxsocketclientconnect} with {\it wait} set to FALSE.
+
+\wxheading{Parameters}
-Wait for a "connect" event.
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
+
+\docparam{millisecond}{Number of milliseconds to wait.}
+
+\wxheading{Return value}
+
+WaitOnConnect returns TRUE if the connection request completes. This
+does not necessarily mean that the connection was succesfully established;
+it might also happen that the connection was refused by the peer. Use
+\helpref{IsConnected}{wxsocketbaseisconnected} to distinguish between
+these two situations.
+
+If the timeout elapses, WaitOnConnect returns FALSE.
+
+These semantics allow code like this:
+
+\begin{verbatim}
+// Issue the connection request
+client->Connect(addr, FALSE);
+
+// Wait until the request completes or until we decide to give up
+bool waitmore = TRUE;
+while ( !client->WaitOnConnect(seconds, millis) && waitmore )
+{
+ // possibly give some feedback to the user,
+ // and update waitmore as needed.
+}
+bool success = client->IsConnected();
+\end{verbatim}
\wxheading{See also}
-\helpref{wxSocketBase::Wait}{wxsocketbasewait} for a detailed description.
+\helpref{wxSocketClient::Connect}{wxsocketclientconnect},
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::IsConnected}{wxsocketbaseisconnected}
% ---------------------------------------------------------------------------
% CLASS: wxSocketEvent
\helpref{wxEvent}{wxevent}
+\wxheading{Include files}
+
+<wx/socket.h>
+
\wxheading{Event table macros}
-To process a socket event, use these event handler macros to direct input to member
-functions that take a wxSocketEvent argument.
+To process a socket event, use these event handler macros to direct input
+to member functions that take a wxSocketEvent argument.
\twocolwidtha{7cm}
\begin{twocollist}\itemsep=0pt
\twocolitem{{\bf EVT\_SOCKET(id, func)}}{Process a socket event, supplying the member function.}
-\end{twocollist}%
+\end{twocollist}
\wxheading{See also}
-\helpref{wxSocketHandler}{wxsockethandler},\rtfsp
-\helpref{wxSocketBase}{wxsocketbase},\rtfsp
-\helpref{wxSocketClient}{wxsocketclient},\rtfsp
+\helpref{wxSocketBase}{wxsocketbase},
+\helpref{wxSocketClient}{wxsocketclient},
\helpref{wxSocketServer}{wxsocketserver}
\latexignore{\rtfignore{\wxheading{Members}}}
Constructor.
-\membersection{wxSocketEvent::SocketEvent}\label{wxsocketeventsocketevent}
-
-\constfunc{wxSocketBase::wxRequestEvent}{SocketEvent}{\void}
-
-Returns the socket event type.
-
-% ---------------------------------------------------------------------------
-% CLASS: wxSocketHandler
-% ---------------------------------------------------------------------------
-\section{\class{wxSocketHandler}}\label{wxsockethandler}
-
-\wxheading{Derived from}
-
-\helpref{wxObject}{wxobject}
-
-% ---------------------------------------------------------------------------
-% Members
-% ---------------------------------------------------------------------------
-\latexignore{\rtfignore{\wxheading{Members}}}
-
-%
-% wxSocketHandler
-%
-\membersection{wxSocketHandler::wxSocketHandler}
-
-\func{}{wxSocketHandler}{\void}
-
-Constructs a new wxSocketHandler.
-
-It is advised to use \helpref{wxSocketHandler::Master}{wxsockethandlermaster} to
-get a socket handler. But creating a socket handler is useful to group
-many sockets.
-
-%
-% ~wxSocketHandler
-%
-\membersection{wxSocketHandler::\destruct{wxSocketHandler}}
-
-\func{}{\destruct{wxSocketHandler}}{\void}
-
-Destructs a wxSocketHandler object.
-
-%
-% Register
-%
-\membersection{wxSocketHandler::Register}
-
-\func{void}{Register}{\param{wxSocketBase *}{socket}}
-
-Register a socket: if it is already registered in this handler it will just
-return immediately.
-
-\wxheading{Parameters}
-
-\docparam{socket}{Socket to be registered.}
-
-%
-% UnRegister
-%
-\membersection{wxSocketHandler::UnRegister}
-
-\func{void}{UnRegister}{\param{wxSocketBase *}{socket}}
-
-UnRegister a socket: if it isn't registered in this handler it will just
-return.
-
-\wxheading{Parameters}
-
-\docparam{socket}{Socket to be unregistered.}
-
-%
-% Count
-%
-\membersection{wxSocketHandler::Count}
-
-\constfunc{unsigned long}{Count}{\void}
-
-Returns the number of sockets registered in the handler.
-
-\wxheading{Return value}
-
-Number of sockets registered.
-
-%
-% CreateServer
-%
-\membersection{wxSocketHandler::CreateServer}
-
-\func{wxSocketServer *}{CreateServer}{\param{wxSockAddress\&}{ address}, \param{wxSocketBase::wxSockFlags}{ flags = wxSocketbase::NONE}}
-
-Creates a new wxSocketServer object. The object is automatically registered
-to the current socket handler.
-For a detailed description of the parameters, see \helpref{wxSocketServer::wxSocketServer}{wxsocketserverconstr}.
-
-\wxheading{Return value}
-
-Returns a new socket server.
-
-%
-% CreateClient
-%
-\membersection{wxSocketHandler::CreateClient}
-
-\func{wxSocketServer *}{CreateClient}{\param{wxSocketBase::wxSockFlags}{ flags = wxSocketbase::NONE}}
-
-Creates a new wxSocketClient object. The object is automatically registered
-to the current socket handler.
+\membersection{wxSocketEvent::GetClientData}\label{wxsocketeventgetclientdata}
-For a detailed description of the parameters, see \helpref{wxSocketClient::Connect}{wxsocketclientconnect}.
+\func{void *}{GetClientData}{\void}
-\wxheading{Return value}
-
-Returns a new socket client.
-
-%
-% Master
-%
-\membersection{wxSocketHandler::Master}\label{wxsockethandlermaster}
+Gets the client data of the socket which generated this event, as
+set with \helpref{wxSocketBase::SetClientData}{wxsocketbasesetclientdata}.
-\func{static wxSocketHandler\&}{Master}{\void}
+\membersection{wxSocketEvent::GetSocket}\label{wxsocketeventgetsocket}
-Returns a default socket handler.
+\constfunc{wxSocketBase *}{GetSocket}{\void}
-%
-% Wait
-%
-\membersection{wxSocketHandler::Wait}
+Returns the socket object to which this event refers to. This makes
+it possible to use the same event handler for different sockets.
-\func{int}{Wait}{\param{long}{ seconds},\param{long}{ microseconds}}
-
-Wait for an event on all registered sockets.
-
-\wxheading{Parameters}
-
-\docparam{seconds}{Number of seconds to wait. By default, it waits infinitely.}
-
-\docparam{microsecond}{Number of microseconds to wait.}
-
-\wxheading{Return value}
+\membersection{wxSocketEvent::GetSocketEvent}\label{wxsocketeventgetsocketevent}
-Returns 0 if a timeout occured, else the number of events detected.
+\constfunc{wxSocketNotify}{GetSocketEvent}{\void}
-\wxheading{See also}
-
-\helpref{wxSocketBase::Wait}{wxsocketbasewait}
-
-%
-% YieldSock
-%
-\membersection{wxSocketHandler::YieldSock}
-
-\func{void}{YieldSock}{\void}
-
-Execute pending requests in all registered sockets.
+Returns the socket event type.
% ---------------------------------------------------------------------------
% CLASS: wxSocketServer
\helpref{wxSocketBase}{wxsocketbase}
+\wxheading{Include files}
+
+<wx/socket.h>
+
% ---------------------------------------------------------------------------
% Members
% ---------------------------------------------------------------------------
%
\membersection{wxSocketServer::wxSocketServer}\label{wxsocketserverconstr}
-\func{}{wxSocketServer}{\param{wxSockAddress\&}{ address}, \param{wxSockFlags}{ flags = wxSocketBase::NONE}}
-
-Constructs a new wxSocketServer.
+\func{}{wxSocketServer}{\param{wxSockAddress\&}{ address}, \param{wxSocketFlags}{ flags = wxSOCKET\_NONE}}
-{\bf Warning !} The created object needs to be registered to a socket handler
-(see \helpref{wxSocketHandler}{wxsockethandler}).
+Constructs a new server and tries to bind to the specified {\it address}.
+Before trying to accept new connections, test whether it succeeded with
+\helpref{wxSocketBase::Ok}{wxsocketbaseok}.
\wxheading{Parameters}
\func{}{\destruct{wxSocketServer}}{\void}
-Destructs a wxSocketServer object (it doesn't close the accepted connection).
+Destructor (it doesn't close the accepted connections).
%
% Accept
%
-\membersection{wxSocketServer::Accept}
+\membersection{wxSocketServer::Accept}\label{wxsocketserveraccept}
-\func{wxSocketBase *}{Accept}{\void}
+\func{wxSocketBase *}{Accept}{\param{bool}{ wait = TRUE}}
-Creates a new object wxSocketBase and accepts an incoming connection. {\bf Warning !} This function will block the GUI.
+Accepts an incoming connection request, and creates a new
+\helpref{wxSocketBase}{wxsocketbase} object which represents
+the server-side of the connection.
+
+If {\it wait} is TRUE and there are no pending connections to be
+accepted, it will wait for the next incoming connection to
+arrive. {\bf Warning:} This will block the GUI.
+
+If {\it wait} is FALSE, it will try to accept a pending connection
+if there is one, but it will always return immediately without blocking
+the GUI. If you want to use Accept in this way, you can either check for
+incoming connections with \helpref{WaitForAccept}{wxsocketserverwaitforaccept}
+or catch {\bf wxSOCKET\_CONNECTION} events, then call Accept once you know
+that there is an incoming connection waiting to be accepted.
\wxheading{Return value}
-Returns an opened socket connection.
+Returns an opened socket connection, or NULL if an error occurred or
+if the {\it wait} parameter was FALSE and there were no pending
+connections.
\wxheading{See also}
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
\helpref{wxSocketServer::AcceptWith}{wxsocketserveracceptwith}
%
%
\membersection{wxSocketServer::AcceptWith}\label{wxsocketserveracceptwith}
-\func{bool}{AcceptWith}{\param{wxSocketBase\&}{ socket}}
+\func{bool}{AcceptWith}{\param{wxSocketBase\&}{ socket}, \param{bool}{ wait = TRUE}}
Accept an incoming connection using the specified socket object.
-This is useful when someone wants to inherit wxSocketBase.
\wxheading{Parameters}
\wxheading{Return value}
-Returns TRUE if no error occurs, else FALSE.
+Returns TRUE on success, or FALSE if an error occurred or if the
+{\it wait} parameter was FALSE and there were no pending
+connections.
+
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
+\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
+\helpref{wxSocketServer::Accept}{wxsocketserveraccept}
+
+%
+% WaitForAccept
+%
+\membersection{wxSocketServer::WaitForAccept}\label{wxsocketserverwaitforaccept}
+
+\func{bool}{WaitForAccept}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
+
+This function waits for an incoming connection. Use it if you want to call
+\helpref{Accept}{wxsocketserveraccept} or \helpref{AcceptWith}{wxsocketserveracceptwith}
+with {\it wait} set to FALSE, to detect when an incoming connection is waiting
+to be accepted.
+
+\wxheading{Parameters}
+
+\docparam{seconds}{Number of seconds to wait.
+If -1, it will wait for the default timeout,
+as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
+
+\docparam{millisecond}{Number of milliseconds to wait.}
+
+\wxheading{Return value}
+
+Returns TRUE if an incoming connection arrived, FALSE if the timeout elapsed.
+
+\wxheading{See also}
+\helpref{wxSocketServer::Accept}{wxsocketserveraccept},
+\helpref{wxSocketServer::AcceptWith}{wxsocketserveracceptwith},
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait}
projects / wxWidgets.git / blobdiff