#endif //ndef WX_PRECOMP
#include "wx/unix/execute.h"
#include "wx/stdpaths.h"
+#include "wx/app.h"
#include "wx/apptrait.h"
#include "wx/thread.h"
#include "wx/process.h"
+#include <sys/wait.h>
+
// Use polling instead of Mach ports, which doesn't work on Intel
// due to task_for_pid security issues.
+// http://developer.apple.com/technotes/tn/tn2050.html
+
// What's a better test for Intel vs PPC?
#ifdef WORDS_BIGENDIAN
#define USE_POLLING 0
#if USE_POLLING
+#if wxUSE_THREADS
class wxProcessTerminationEventHandler: public wxEvtHandler
{
public:
{
Disconnect(-1, wxEVT_END_PROCESS, wxProcessEventHandler(wxProcessTerminationEventHandler::OnTerminate));
wxHandleProcessTermination(m_data);
- delete this;
+
+ // NOTE: We don't use this to delay destruction until the next idle run but rather to
+ // avoid killing ourselves while our caller (which is our wxEvtHandler superclass
+ // ProcessPendingEvents) still needs our m_eventsLocker to be valid.
+ // Since we're in the GUI library we can guarantee that ScheduleForDestroy is using
+ // the GUI implementation which delays destruction and not the base implementation
+ // which does it immediately.
+ wxTheApp->GetTraits()->ScheduleForDestroy(this);
}
wxEndProcessData* m_data;
{
usleep(100);
int status = 0;
- int rc = waitpid(abs(m_data->pid), & status, WNOHANG);
+ int rc = waitpid(abs(m_data->pid), & status, 0);
if (rc != 0)
{
if ((rc != -1) && WIFEXITED(status))
return 0;
}
+#else // !wxUSE_THREADS
+int wxAddProcessCallbackForPid(wxEndProcessData*, int)
+{
+ wxLogDebug(wxT("Could not create termination detection thread."));
+ return -1;
+}
+#endif // wxUSE_THREADS/!wxUSE_THREADS
-#else
+#else // !USE_POLLING
#include <CoreFoundation/CFMachPort.h>
-#include <sys/wait.h>
extern "C" {
#include <mach/mach.h>
}
-void wxMAC_MachPortEndProcessDetect(CFMachPortRef port, void *data)
+void wxMAC_MachPortEndProcessDetect(CFMachPortRef WXUNUSED(port), void *data)
{
wxEndProcessData *proc_data = (wxEndProcessData*)data;
wxLogDebug(wxT("Process ended"));
int rc = waitpid(abs(proc_data->pid), &status, WNOHANG);
if(!rc)
{
- wxLogDebug(wxT("Mach port was invalidated, but process hasn't terminated!"));
- return;
+ wxLogDebug(wxT("Mach port was invalidated, but process hasn't terminated!"));
+ return;
}
if((rc != -1) && WIFEXITED(status))
- proc_data->exitcode = WEXITSTATUS(status);
+ proc_data->exitcode = WEXITSTATUS(status);
else
- proc_data->exitcode = -1;
+ proc_data->exitcode = -1;
wxHandleProcessTermination(proc_data);
}
return 0;
}
-#endif // USE_POLLING
+#endif // USE_POLLING/!USE_POLLING
+
+/////////////////////////////////////////////////////////////////////////////
+// New implementation avoiding mach ports entirely.
+
+#include <CoreFoundation/CFSocket.h>
+
+/*!
+ Called due to source signal detected by the CFRunLoop.
+ This is nearly identical to the wxGTK equivalent.
+ */
+extern "C" void WXCF_EndProcessDetector(CFSocketRef s,
+ CFSocketCallBackType WXUNUSED(callbackType),
+ CFDataRef WXUNUSED(address),
+ void const *WXUNUSED(data),
+ void *info)
+{
+ wxEndProcessData * const proc_data = static_cast<wxEndProcessData*>(info);
+
+/// This code could reasonably be shared between wxMac/wxCocoa and wxGTK ///
+ // PID is always positive on UNIX but wx uses the sign bit as a flag.
+ int pid = (proc_data->pid > 0) ? proc_data->pid : -proc_data->pid;
+ int status = 0;
+ int rc = waitpid(pid, &status, WNOHANG);
+ if(rc == 0)
+ {
+ // Keep waiting in case we got a spurious notification
+ // NOTE: In my limited testing, this doesn't happen.
+ return;
+ }
+
+ if(rc == -1)
+ { // Error.. really shouldn't happen but try to gracefully handle it
+ wxLogLastError(_T("waitpid"));
+ proc_data->exitcode = -1;
+ }
+ else
+ { // Process ended for some reason
+ wxASSERT_MSG(rc == pid, _T("unexpected waitpid() return value"));
+
+ if(WIFEXITED(status))
+ proc_data->exitcode = WEXITSTATUS(status);
+ else if(WIFSIGNALED(status))
+ // wxGTK doesn't do this but why not?
+ proc_data->exitcode = -WTERMSIG(status);
+ else
+ { // Should NEVER happen according to waitpid docs
+ wxLogError(wxT("waitpid indicates process exited but not due to exiting or signalling"));
+ proc_data->exitcode = -1;
+ }
+ }
+/// The above code could reasonably be shared between wxMac/wxCocoa and wxGTK ///
+
+ /*
+ Either waitpid failed or the process ended successfully. Either way,
+ we're done. It's not if waitpid is going to magically succeed when
+ we get fired again. CFSocketInvalidate closes the fd for us and also
+ invalidates the run loop source for us which should cause it to
+ release the CFSocket (thus causing it to be deallocated) and remove
+ itself from the runloop which should release it and cause it to also
+ be deallocated. Of course, it's possible the RunLoop hangs onto
+ one or both of them by retaining/releasing them within its stack
+ frame. However, that shouldn't be depended on. Assume that s is
+ deallocated due to the following call.
+ */
+ CFSocketInvalidate(s);
+
+ // Now tell wx that the process has ended.
+ wxHandleProcessTermination(proc_data);
+}
+
+/*!
+ Implements the GUI-specific wxAddProcessCallback for both wxMac and
+ wxCocoa using the CFSocket/CFRunLoop API which is available to both.
+ Takes advantage of the fact that sockets on UNIX are just regular
+ file descriptors and thus even a non-socket file descriptor can
+ apparently be used with CFSocket so long as you only tell CFSocket
+ to do things with it that would be valid for a non-socket fd.
+ */
+int wxAddProcessCallback(wxEndProcessData *proc_data, int fd)
+{
+ static int s_last_tag = 0;
+ CFSocketContext context =
+ { 0
+ , static_cast<void*>(proc_data)
+ , NULL
+ , NULL
+ , NULL
+ };
+ CFSocketRef cfSocket = CFSocketCreateWithNative(kCFAllocatorDefault,fd,kCFSocketReadCallBack,&WXCF_EndProcessDetector,&context);
+ if(cfSocket == NULL)
+ {
+ wxLogError(wxT("Failed to create socket for end process detection"));
+ return 0;
+ }
+ CFRunLoopSourceRef runLoopSource = CFSocketCreateRunLoopSource(kCFAllocatorDefault, cfSocket, /*highest priority:*/0);
+ if(runLoopSource == NULL)
+ {
+ wxLogError(wxT("Failed to create CFRunLoopSource from CFSocket for end process detection"));
+ // closes the fd.. we can't really stop it, nor do we necessarily want to.
+ CFSocketInvalidate(cfSocket);
+ CFRelease(cfSocket);
+ return 0;
+ }
+ // Now that the run loop source has the socket retained and we no longer
+ // need to refer to it within this method, we can release it.
+ CFRelease(cfSocket);
+
+ CFRunLoopAddSource(CFRunLoopGetCurrent(), runLoopSource, kCFRunLoopCommonModes);
+ // Now that the run loop has the source retained we can release it.
+ CFRelease(runLoopSource);
+
+ /*
+ Feed wx some bullshit.. we don't use it since CFSocket helpfully passes
+ itself into our callback and that's enough to be able to
+ CFSocketInvalidate it which is all we need to do to get everything we
+ just created to be deallocated.
+ */
+ return ++s_last_tag;
+}
+
+/////////////////////////////////////////////////////////////////////////////
// NOTE: This doesn't really belong here but this was a handy file to
// put it in because it's already compiled for wxCocoa and wxMac GUI lib.
#if wxUSE_GUI
+#if wxUSE_STDPATHS
static wxStandardPathsCF gs_stdPaths;
wxStandardPathsBase& wxGUIAppTraits::GetStandardPaths()
{
return gs_stdPaths;
}
+#endif
#endif // wxUSE_GUI
projects / wxWidgets.git / blobdiff