#define _WX_SETUP_H_
/* --- start common options --- */
-
// ----------------------------------------------------------------------------
// global settings
// ----------------------------------------------------------------------------
// compatibility settings
// ----------------------------------------------------------------------------
-// This setting determines the compatibility with 2.2 API: set it to 1 to
+// This setting determines the compatibility with 2.4 API: set it to 1 to
// enable it but please consider updating your code instead.
//
// Default is 0
//
// Recommended setting: 0 (please update your code)
-#define WXWIN_COMPATIBILITY_2_2 0
+#define WXWIN_COMPATIBILITY_2_4 0
-// This setting determines the compatibility with 2.4 API: set it to 0 to
+// This setting determines the compatibility with 2.6 API: set it to 0 to
// flag all cases of using deprecated functions.
//
// Default is 1 but please try building your code with 0 as the default will
// in the version after it completely.
//
// Recommended setting: 0 (please update your code)
-#define WXWIN_COMPATIBILITY_2_4 1
+#define WXWIN_COMPATIBILITY_2_6 1
-// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
-// If migrating between versions, your dialogs may seem to shrink.
+// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
+// default system font is used for wxWindow::GetCharWidth/Height() instead of
+// the current font.
//
-// Default is 1
+// Default is 0
//
-// Recommended setting: 0 (the new calculations are more correct!)
-#define wxDIALOG_UNIT_COMPATIBILITY 1
+// Recommended setting: 0
+#define wxDIALOG_UNIT_COMPATIBILITY 0
// ----------------------------------------------------------------------------
// debugging settings
#define wxUSE_ON_FATAL_EXCEPTION 1
// Set this to 1 to be able to generate a human-readable (unlike
-// machine-readable minidumop created by wxCrashReport::Generate()) stack back
+// machine-readable minidump created by wxCrashReport::Generate()) stack back
// trace when your program crashes using wxStackWalker
//
// Default is 1 if supported by the compiler.
// Recommended setting: 1, set to 0 if your programs never crash
#define wxUSE_STACKWALKER 1
+// Set this to 1 to compile in wxDebugReport class which allows you to create
+// and optionally upload to your web site a debug report consisting of back
+// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, it is compiled into a separate library so there
+// is no overhead if you don't use it
+#define wxUSE_DEBUGREPORT 1
+
// ----------------------------------------------------------------------------
// Unicode support
// ----------------------------------------------------------------------------
#define wxUSE_UNICODE 0
#endif
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
-// and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
-// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
-// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
-// that you will have to modify the makefiles to include unicows.lib import
-// library as the first library (see installation instructions in install.txt
-// to learn how to do it when building the library or samples).
-//
-// If your compiler doesn't have unicows.lib, you can get a version of it at
-// http://libunicows.sourceforge.net
-//
-// Default is 0
-//
-// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
-#define wxUSE_UNICODE_MSLU 0
-
// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
// compiling the program in Unicode mode. More precisely, it will be possible
// to construct wxString from a wide (Unicode) string and convert any wxString
// code will lead to undefined behaviour -- but the code itself will be
// slightly smaller and faster.
//
+// Note that like wxUSE_THREADS this option is automatically set to 0 if
+// wxNO_EXCEPTIONS is defined.
+//
// Default is 1
//
// Recommended setting: depends on whether you intend to use C++ exceptions
// library without it if you have no use for it - this will result in a
// somewhat smaller and faster operation.
//
-// This is ignored under Win16, threads are only supported under Win32.
+// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
+// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
+// build/msw/config.* file this value will have no effect.
//
// Default is 1
//
// Recommended setting: 0 unless you do plan to develop MT applications
#define wxUSE_THREADS 1
-// If enabled (1), compiles wxWidgets streams classes
+// If enabled, compiles wxWidgets streams classes
+//
+// wx stream classes are used for image IO, process IO redirection, network
+// protocols implementation and much more and so disabling this results in a
+// lot of other functionality being lost.
+//
+// Default is 1
+//
+// Recommended setting: 1 as setting it to 0 disables many other things
#define wxUSE_STREAMS 1
-// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
+// Use standard C++ streams if 1 instead of wx streams in some places. If
+// disabled (default), wx streams are used everywhere and wxWidgets doesn't
+// depend on the standard streams library.
+//
+// Notice that enabling this does not replace wx streams with std streams
+// everywhere, in a lot of places wx streams are used no matter what.
+//
+// Default is 0
+//
+// Recommended setting: 1 if you use the standard streams anyhow and so
+// dependency on the standard streams library is not a
+// problem
#define wxUSE_STD_IOSTREAM 0
+// Enable conversion to standard C++ string if 1.
+#define wxUSE_STD_STRING 0
+
// ----------------------------------------------------------------------------
// non GUI features selection
// ----------------------------------------------------------------------------
// Recommended setting: 1 (but may be safely disabled if you don't use it)
#define wxUSE_FSVOLUME 1
+// Use wxStandardPaths class which allows to retrieve some standard locations
+// in the file system
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be disabled to save space, but not much)
+#define wxUSE_STDPATHS 1
+
// use wxTextBuffer class: required by wxTextFile
#define wxUSE_TEXTBUFFER 1
// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
#define wxUSE_FS_INET 1
+// wxArchive classes for accessing archives such as zip and tar
+#define wxUSE_ARCHIVE_STREAMS 1
+
// Set to 1 to compile wxZipInput/OutputStream classes.
#define wxUSE_ZIPSTREAM 1
// Recommended setting: 1
#define wxUSE_MEDIACTRL 1
-// Use QuickTime
-//
-// Default is 0
-//
-// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
-#define wxUSE_QUICKTIME 0
-
-// Use DirectShow (requires linkage to strmiids.lib)
+// Use GStreamer for Unix (req a lot of dependancies)
//
// Default is 0
//
-// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
-#define wxUSE_DIRECTSHOW 0
+// Recommended setting: 1 (wxMediaCtrl won't work by default without it)
+#define wxUSE_GSTREAMER 0
// Use wxWidget's XRC XML-based resource system. Recommended.
//
#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
#define wxUSE_CHOICE 1 // wxChoice
#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
#define wxUSE_GAUGE 1 // wxGauge
#define wxUSE_LISTBOX 1 // wxListBox
// Default is 1 for the platforms where native status bar is supported.
//
// Recommended setting: 1 (there is no advantage in using the generic one)
-#if defined(__WXMSW__) || defined(__WXMAC__)
#define wxUSE_NATIVE_STATUSBAR 1
-#else
-#define wxUSE_NATIVE_STATUSBAR 0
-#endif
// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
// classes at all. Otherwise, use the native toolbar class unless
// Recommended setting: 1
#define wxUSE_CHOICEBOOK 1
+// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TREEBOOK 1
+
+// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
+// tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLBOOK 1
+
// wxTabDialog is a generic version of wxNotebook but it is incompatible with
// the new class. It shouldn't be used in new code.
//
#define wxUSE_CARET 1
// Use wxDisplay class: it allows enumerating all displays on a system and
-// working with them.
+// their geometries as well as finding the display on which the given point or
+// window lies.
//
-// Default is 0 because it isn't yet implemented on all platforms
+// Default is 1.
//
// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
-#define wxUSE_DISPLAY 0
+#define wxUSE_DISPLAY 1
// Miscellaneous geometry code: needed for Canvas library
#define wxUSE_GEOMETRY 1
// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
#define wxUSE_GLCANVAS 0
+// wxRichTextCtrl allows editing of styled text.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 if you want compile a
+// smaller library.
+#define wxUSE_RICHTEXT 1
+
// ----------------------------------------------------------------------------
// Data transfer
// ----------------------------------------------------------------------------
// Set to 1 to use font metric files in GetTextExtent
#define wxUSE_AFM_FOR_POSTSCRIPT 1
-// Set to 0 to disable PostScript print/preview architecture code under Windows
-// (just use Windows printing).
-#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
-
// ----------------------------------------------------------------------------
// database classes
// ----------------------------------------------------------------------------
#define wxODBC_FWD_ONLY_CURSORS 1
// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
-// member variables. With a setting of 1, full backward compatability with the
+// member variables. With a setting of 1, full backward compatibility with the
// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
// as future development will be done only on the non-deprecated
// functions/classes/member variables/etc.
// Windows-only settings
// ----------------------------------------------------------------------------
+// Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode
+// and want to run your programs under Windows 9x and not only NT/2000/XP.
+// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
+// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
+// that you will have to modify the makefiles to include unicows.lib import
+// library as the first library (see installation instructions in install.txt
+// to learn how to do it when building the library or samples).
+//
+// If your compiler doesn't have unicows.lib, you can get a version of it at
+// http://libunicows.sourceforge.net
+//
+// Default is 0
+//
+// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
+#ifndef wxUSE_UNICODE_MSLU
+ #define wxUSE_UNICODE_MSLU 0
+#endif
+
// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
// will override some other settings (see below)
//
// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
#define wxUSE_DIB_FOR_BITMAP 0
-// Set this to 1 to enable wxDIB
-#define wxUSE_WXDIB 1
-
-// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
-// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
-// miniframes support instead.
+// Set this to 1 to enable wxDIB class used internally for manipulating
+// wxBitmao data.
//
-// Default is 0 for (most) Win32 (systems), 1 for Win16
+// Default is 1, set it to 0 only if you don't use wxImage neither
//
-#define wxUSE_ITSY_BITSY 0
+// Recommended setting: 1 (without it conversion to/from wxImage won't work)
+#define wxUSE_WXDIB 1
+
+// Set to 0 to disable PostScript print/preview architecture code under Windows
+// (just use Windows printing).
+#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
// which allows to put more than ~32Kb of text in it even under Win9x (NT
//
// Recommended setting: 1, only set it to 0 if your compiler doesn't have
// or can't compile <richedit.h>
-#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
#define wxUSE_RICHEDIT 1
-// TODO: This should be ifdef'ed for any compilers that don't support
-// RichEdit 2.0 but do have RichEdit 1.0...
+// Set this to 1 to use extra features of richedit v2 and later controls
+//
+// Default is 1 for compilers which support it
+//
+// Recommended setting: 1
#define wxUSE_RICHEDIT2 1
-#else
-#define wxUSE_RICHEDIT 0
-#define wxUSE_RICHEDIT2 0
-#endif
-
// Set this to 1 to enable support for the owner-drawn menu and listboxes. This
// is required by wxUSE_CHECKLISTBOX.
//
// (notably, wxNotebook pages)
#define wxUSE_UXTHEME_AUTO 1
+// Set to 1 to use InkEdit control (Tablet PC), if available
+#define wxUSE_INKEDIT 0
+
// ----------------------------------------------------------------------------
// Generic versions of native controls
// ----------------------------------------------------------------------------
// Set this to 1 to be able to use wxCrashReport::Generate() to create mini
// dumps of your program when it crashes (or at any other moment)
//
-// Default is 1 if supported by the compiler.
+// Default is 1 if supported by the compiler (VC++ and recent BC++ only).
//
// Recommended setting: 1, set to 0 if your programs never crash
#define wxUSE_CRASHREPORT 1
-
-// all of the settings below require SEH support (__try/__catch) and can't work
-// without it
-#if !defined(_MSC_VER) && \
- (!defined(__BORLANDC__) || __BORLANDC__ < 0x0550)
- #undef wxUSE_ON_FATAL_EXCEPTION
- #define wxUSE_ON_FATAL_EXCEPTION 0
-
- #undef wxUSE_CRASHREPORT
- #define wxUSE_CRASHREPORT 0
-
- #undef wxUSE_STACKWALKER
- #define wxUSE_STACKWALKER 0
-#endif // compiler doesn't support SEH
-
// ----------------------------------------------------------------------------
// obsolete settings
// ----------------------------------------------------------------------------
// NB: all settings in this section are obsolete and should not be used/changed
// at all, they will disappear
-// Set to 1 to use PenWindows
-#define wxUSE_PENWINDOWS 0
-
// Define 1 to use bitmap messages.
#define wxUSE_BITMAP_MESSAGE 1
projects / wxWidgets.git / blobdiff