\section{\class{wxImage}}\label{wximage}
This class encapsulates a platform-independent image. An image can be created
-from data, or using the constructor taking a wxBitmap object. An image
+from data, or using \helpref{wxBitmap::ConvertToImage}{wxbitmapconverttoimage}. An image
can be loaded from a file in a variety of formats, and is extensible to new formats
via image format handlers. Functions are available to set and get image bits, so
it can be used for basic image manipulation.
-A wxImage cannot (currently) be drawn directly to a wxDC. Instead, a platform-specific
-wxBitmap object must be created from it, and that bitmap drawn on the wxDC, using
-wxDC::DrawBitmap.
+A wxImage cannot (currently) be drawn directly to a \helpref{wxDC}{wxdc}. Instead,
+a platform-specific \helpref{wxBitmap}{wxbitmap} object must be created from it using
+the \helpref{wxBitmap::wxBitmap(wxImage,int depth)}{wxbitmapconstr} constructor.
+This bitmap can then
+be drawn in a device context, using \helpref{wxDC::DrawBitmap}{wxdcdrawbitmap}.
+
+One colour value of the image may be used as a mask colour which will lead to the automatic
+creation of a \helpref{wxMask}{wxmask} object associated to the bitmap object.
+
+\wxheading{Available image handlers}
+
+The following image handlers are available. {\bf wxBMPHandler} is always
+installed by default. To use other image formats, install the appropiate
+handler with \helpref{wxImage::AddHandler}{wximageaddhandler} or
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}.
+
+\twocolwidtha{5cm}%
+\begin{twocollist}
+\twocolitem{\indexit{wxBMPHandler}}{Only for loading, always installed.}
+\twocolitem{\indexit{wxPNGHandler}}{For loading and saving.}
+\twocolitem{\indexit{wxJPEGHandler}}{For loading and saving.}
+\twocolitem{\indexit{wxGIFHandler}}{Only for loading, due to legal issues.}
+\twocolitem{\indexit{wxPCXHandler}}{For loading and saving (see below).}
+\twocolitem{\indexit{wxPNMHandler}}{For loading and saving (see below).}
+\twocolitem{\indexit{wxTIFFHandler}}{For loading and saving.}
+\twocolitem{\indexit{wxXPMHandler}}{For loading and saving.}
+\end{twocollist}
+
+When saving in PCX format, {\bf wxPCXHandler} will count the number of
+different colours in the image; if there are 256 or less colours, it will
+save as 8 bit, else it will save as 24 bit.
+
+Loading PNMs only works for ASCII or raw RGB images. When saving in
+PNM format, {\bf wxPNMHandler} will always save as raw RGB.
\wxheading{Derived from}
\wxheading{See also}
-\helpref{wxBitmap}{wxbitmap}
+\helpref{wxBitmap}{wxbitmap},
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}
\latexignore{\rtfignore{\wxheading{Members}}}
\func{}{wxImage}{\param{const wxBitmap\&}{ bitmap}}
-Constructs an image from a platform-dependent bitmap. This preserves
+(Deprecated form, use \helpref{wxBitmap::ConvertToImage}{wxbitmapconverttoimage}
+instead.) Constructs an image from a platform-dependent bitmap. This preserves
mask information so that bitmaps and images can be converted back
and forth without loss in that respect.
Creates an image with the given width and height.
-\func{}{wxImage}{\param{const wxString\& }{name}, \param{long}{ type = wxBITMAP\_TYPE\_PNG}}
+\func{}{wxImage}{\param{int}{ width}, \param{int}{ height}, \param{unsigned char*}{ data}, \param{bool}{ static\_data=FALSE}}
+
+Creates an image from given data with the given width and height. If
+{\it static\_data} is TRUE, then wxImage will not delete the actual
+image data in its destructor, otherwise it will free it by calling
+{\it free()}.
+
+\func{}{wxImage}{\param{const wxString\& }{name}, \param{long}{ type = wxBITMAP\_TYPE\_ANY}}
+
+\func{}{wxImage}{\param{const wxString\& }{name}, \param{const wxString\&}{ mimetype}}
Loads an image from a file.
-\func{}{wxImage}{\param{wxInputStream\& }{stream}, \param{long}{ type = wxBITMAP\_TYPE\_PNG}}
+\func{}{wxImage}{\param{wxInputStream\& }{stream}, \param{long}{ type = wxBITMAP\_TYPE\_ANY}}
+
+\func{}{wxImage}{\param{wxInputStream\& }{stream}, \param{const wxString\&}{ mimetype}}
Loads an image from an input stream.
\docparam{height}{Specifies the height of the image.}
-\docparam{name}{This refers to an image filename. Its meaning is determined by the {\it type} parameter.}
+\docparam{name}{Name of the file from which to load the image.}
-\docparam{stream}{This refers to an input stream. Its meaning is determined by the {\it type} parameter. It is equal to loading from file except that you provide opened stream (file, HTTP or any other custom class).}
+\docparam{stream}{Opened input stream from which to load the image. Currently, the stream must support seeking.}
\docparam{type}{May be one of the following:
\twocolwidtha{5cm}%
\begin{twocollist}
-\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_BMP}}}{Load a Windows bitmap file.}
-\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_PNG}}}{Load a PNG bitmap file.}
-\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_JPEG}}}{Load a JPEG bitmap file.}
-\end{twocollist}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_BMP}}{Load a Windows bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_GIF}}{Load a GIF bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_JPEG}}{Load a JPEG bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_PNG}}{Load a PNG bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_PCX}}{Load a PCX bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_PNM}}{Load a PNM bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_TIF}}{Load a TIFF bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_XPM}}{Load a XPM bitmap file.}
+\twocolitem{\indexit{wxBITMAP\_TYPE\_ANY}}{Will try to autodetect the format.}
+\end{twocollist}}
+
+\docparam{mimetype}{MIME type string (for example 'image/jpeg')}
+
+\wxheading{Remarks}
-The validity of these flags depends on the platform and wxWindows configuration.
-If all possible wxWindows settings are used, the loading a BMP (Windows bitmap) file,
-a PNG (portable network graphics) file and a JPEG file is supported on all platforms that
-implement wxImage.}
+Depending on how wxWindows has been configured, not all formats may be available.
-Note : you must call wxImage::AddHandler(new wxJPEGHandler) during application
-initialization in order to work with JPEGs.
+Note: any handler other than BMP must be previously
+initialized with \helpref{wxImage::AddHandler}{wximageaddhandler} or
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}.
\wxheading{See also}
\helpref{wxImage::LoadFile}{wximageloadfile}
+\pythonnote{Constructors supported by wxPython are:\par
+\indented{2cm}{\begin{twocollist}
+\twocolitem{{\bf wxImage(name, flag)}}{Loads an image from a file}
+\twocolitem{{\bf wxNullImage()}}{Create a null image (has no size or
+image data)}
+\twocolitem{{\bf wxEmptyImage(width, height)}}{Creates an empty image
+of the given size}
+\twocolitem{{\bf wxImageFromMime(name, mimetype}}{Creates an image from
+the given file of the given mimetype}
+\twocolitem{{\bf wxImageFromBitmap(bitmap)}}{Creates an image from a
+platform-dependent bitmap}
+\end{twocollist}}
+}
+
+\perlnote{Constructors supported by wxPerl are:\par
+\begin{itemize}
+\item{Wx::Image->new( bitmap )}
+\item{Wx::Image->new( width, height )}
+\item{Wx::Image->new( name, type )}
+\item{Wx::Image->new( name, mimetype )}
+\end{itemize}
+}
+
\membersection{wxImage::\destruct{wxImage}}
\func{}{\destruct{wxImage}}{\void}
\helpref{wxImageHandler}{wximagehandler}
+\pythonnote{In wxPython this static method is named {\tt wxImage\_AddHandler}.}
\membersection{wxImage::CleanUpHandlers}
\func{static void}{CleanUpHandlers}{\void}
\constfunc{wxBitmap}{ConvertToBitmap}{\void}
-Converts the image to a platform-specific bitmap object. This has to be done
-to actually display an image as you cannot draw an image directly on a window.
-The resulting bitmap will use the colour depth of the current system which entails
-that a (crude) colour reduction has to take place. When in 8-bit mode, this
-routine will use a color cube created on program start-up to look up colors.
-Still, the image quality won't be perfect for photo images.
+Deprecated, use equivalent \helpref{wxBitmap constructor}{wxbitmapconstr}
+(which takes wxImage and depth as its arguments) instead.
+
+\membersection{wxImage::ConvertToMono}\label{wxbitmapconverttomono}
+
+\constfunc{wxImage}{ConvertToMono}{\param{unsigned char}{ r}, \param{unsigned char}{ g}, \param{unsigned char}{ b}}
+
+Returns monochromatic version of the image. The returned image has white
+colour where the original has {\it (r,g,b)} colour and black colour
+everywhere else.
+
+\membersection{wxImage::Copy}\label{wximagecopy}
+
+\constfunc{wxImage}{Copy}{\void}
+
+Returns an identical copy of the image.
\membersection{wxImage::Create}\label{wximagecreate}
Finds the handler associated with the given image type.
+\func{static wxImageHandler*}{FindHandlerMime}{\param{const wxString\& }{mimetype}}
+
+Finds the handler associated with the given MIME type.
+
\docparam{name}{The handler name.}
\docparam{extension}{The file extension, such as ``bmp".}
\docparam{imageType}{The image type, such as wxBITMAP\_TYPE\_BMP.}
+\docparam{mimetype}{MIME type.}
+
\wxheading{Return value}
A pointer to the handler if found, NULL otherwise.
Gets the red value of the mask colour.
+\membersection{wxImage::GetPalette}\label{wximagegetpalette}
+
+\constfunc{const wxPalette\&}{GetPalette}{\void}
+
+Returns the palette associated with the image. Currently the palette is only
+used when converting to wxBitmap under Windows.
+
+Eventually wxImage handlers will set the palette if one exists in the image file.
+
+\membersection{wxImage::GetSubImage}\label{wximagegetsubimage}
+
+\constfunc{wxImage}{GetSubImage}{\param{const wxRect\&}{ rect}}
+
+Returns a sub image of the current one as long as the rect belongs entirely to
+the image.
+
\membersection{wxImage::GetWidth}\label{wximagegetwidth}
\constfunc{int}{GetWidth}{\void}
Returns TRUE if there is a mask active, FALSE otherwise.
+\membersection{wxImage::GetOption}\label{wximagegetoption}
+
+\constfunc{wxString}{GetOption}{\param{const wxString\&}{ name}}
+
+Gets a user-defined option. The function is case-insensitive to {\it name}.
+
+For example, when saving as a JPEG file, the option {\bf quality} is
+used, which is a number between 0 and 100 (0 is terrible, 100 is very good).
+
+\wxheading{See also}
+
+\helpref{wxImage::SetOption}{wximagesetoption},\rtfsp
+\helpref{wxImage::GetOptionInt}{wximagegetoptionint},\rtfsp
+\helpref{wxImage::HasOption}{wximagehasoption}
+
+\membersection{wxImage::GetOptionInt}\label{wximagegetoptionint}
+
+\constfunc{int}{GetOptionInt}{\param{const wxString\&}{ name}}
+
+Gets a user-defined option as an integer. The function is case-insensitive to {\it name}.
+
+\wxheading{See also}
+
+\helpref{wxImage::SetOption}{wximagesetoption},\rtfsp
+\helpref{wxImage::GetOption}{wximagegetoption},\rtfsp
+\helpref{wxImage::HasOption}{wximagehasoption}
+
+\membersection{wxImage::HasOption}\label{wximagehasoption}
+
+\constfunc{bool}{HasOption}{\param{const wxString\&}{ name}}
+
+Returns TRUE if the given option is present. The function is case-insensitive to {\it name}.
+
+\wxheading{See also}
+
+\helpref{wxImage::SetOption}{wximagesetoption},\rtfsp
+\helpref{wxImage::GetOption}{wximagegetoption},\rtfsp
+\helpref{wxImage::GetOptionInt}{wximagegetoptionint}
+
\membersection{wxImage::InitStandardHandlers}
\func{static void}{InitStandardHandlers}{\void}
-Adds the standard image format handlers, which, depending on wxWindows
-configuration, can be handlers for Windows BMP (loading), PNG
-(loading and saving) and JPEG (loading and saving) file formats.
+Internal use only. Adds standard image format handlers. It only install BMP
+for the time being, which is used by wxBitmap.
-This function is called by wxWindows on startup.
+This function is called by wxWindows on startup, and shouldn't be called by
+the user.
\wxheading{See also}
-\helpref{wxImageHandler}{wximagehandler}
+\helpref{wxImageHandler}{wximagehandler},
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}
\membersection{wxImage::InsertHandler}
\membersection{wxImage::LoadFile}\label{wximageloadfile}
-\func{bool}{LoadFile}{\param{const wxString\&}{ name}, \param{long}{ type}}
+\func{bool}{LoadFile}{\param{const wxString\&}{ name}, \param{long}{ type = wxBITMAP\_TYPE\_ANY}}
-Loads an image from a file.
+\func{bool}{LoadFile}{\param{const wxString\&}{ name}, \param{const wxString\&}{ mimetype}}
+
+Loads an image from a file. If no handler type is provided, the library will
+try to autodetect the format.
\func{bool}{LoadFile}{\param{wxInputStream\&}{ stream}, \param{long}{ type}}
+\func{bool}{LoadFile}{\param{wxInputStream\&}{ stream}, \param{const wxString\&}{ mimetype}}
+
Loads an image from an input stream.
\wxheading{Parameters}
-\docparam{name}{A filename.
-The meaning of {\it name} is determined by the {\it type} parameter.}
+\docparam{name}{Name of the file from which to load the image.}
-\docparam{stream}{An input stream.
-The meaning of {\it stream} data is determined by the {\it type} parameter.}
+\docparam{stream}{Opened input stream from which to load the image. Currently, the stream must support seeking.}
\docparam{type}{One of the following values:
\twocolwidtha{5cm}%
\begin{twocollist}
\twocolitem{{\bf wxBITMAP\_TYPE\_BMP}}{Load a Windows image file.}
-\twocolitem{{\bf wxBITMAP\_TYPE\_PNG}}{Load a PNG image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_GIF}}{Load a GIF image file.}
\twocolitem{{\bf wxBITMAP\_TYPE\_JPEG}}{Load a JPEG image file.}
-\end{twocollist}
+\twocolitem{{\bf wxBITMAP\_TYPE\_PCX}}{Load a PCX image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_PNG}}{Load a PNG image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_PNM}}{Load a PNM image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_TIF}}{Load a TIFF image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_XPM}}{Load a XPM image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_ANY}}{Will try to autodetect the format.}
+\end{twocollist}}
+
+\docparam{mimetype}{MIME type string (for example 'image/jpeg')}
+
+\wxheading{Remarks}
-The validity of these flags depends on the platform and wxWindows configuration.}
+Depending on how wxWindows has been configured, not all formats may be available.
\wxheading{Return value}
\helpref{wxImage::SaveFile}{wximagesavefile}
+\pythonnote{In place of a single overloaded method name, wxPython
+implements the following methods:\par
+\indented{2cm}{\begin{twocollist}
+\twocolitem{{\bf LoadFile(filename, type)}}{Loads an image of the given
+type from a file}
+\twocolitem{{\bf LoadMimeFile(filename, mimetype)}}{Loads an image of the given
+mimetype from a file}
+\end{twocollist}}
+}
+
+\perlnote{Methods supported by wxPerl are:\par
+\begin{itemize}
+\item{bitmap->LoadFile( name, type )}
+\item{bitmap->LoadFile( name, mimetype )}
+\end{itemize}
+}
+
+
\membersection{wxImage::Ok}\label{wximageok}
\constfunc{bool}{Ok}{\void}
\func{bool}{SaveFile}{\param{const wxString\& }{name}, \param{int}{ type}}
+\func{bool}{SaveFile}{\param{const wxString\& }{name}, \param{const wxString\&}{ mimetype}}
+
Saves a image in the named file.
\func{bool}{SaveFile}{\param{wxOutputStream\& }{stream}, \param{int}{ type}}
+\func{bool}{SaveFile}{\param{wxOutputStream\& }{stream}, \param{const wxString\&}{ mimetype}}
+
Saves a image in the given stream.
\wxheading{Parameters}
-\docparam{name}{A filename. The meaning of {\it name} is determined by the {\it type} parameter.}
+\docparam{name}{Name of the file to save the image to.}
-\docparam{stream}{An output stream. The meaning of {\it stream} is determined by the {\it type} parameter.}
+\docparam{stream}{Opened output stream to save the image to.}
-\docparam{type}{Currently two types can be used:
+\docparam{type}{Currently three types can be used:
\twocolwidtha{5cm}%
\begin{twocollist}
-\twocolitem{{\bf wxBITMAP\_TYPE\_PNG}}{Save a PNG image file.}
\twocolitem{{\bf wxBITMAP\_TYPE\_JPEG}}{Save a JPEG image file.}
-\end{twocollist}
+\twocolitem{{\bf wxBITMAP\_TYPE\_PNG}}{Save a PNG image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_PCX}}{Save a PCX image file (tries to save as 8-bit if possible, falls back to 24-bit otherwise).}
+\twocolitem{{\bf wxBITMAP\_TYPE\_PNM}}{Save a PNM image file (as raw RGB always).}
+\twocolitem{{\bf wxBITMAP\_TYPE\_TIFF}}{Save a TIFF image file.}
+\twocolitem{{\bf wxBITMAP\_TYPE\_XPM}}{Save a XPM image file.}
+\end{twocollist}}
-The validity of these flags depends on the platform and wxWindows configuration
-as well as user-added handlers.}
+\docparam{mimetype}{MIME type.}
\wxheading{Return value}
\helpref{wxImage::LoadFile}{wximageloadfile}
+\pythonnote{In place of a single overloaded method name, wxPython
+implements the following methods:\par
+\indented{2cm}{\begin{twocollist}
+\twocolitem{{\bf SaveFile(filename, type)}}{Saves the image using the given
+type to the named file}
+\twocolitem{{\bf SaveMimeFile(filename, mimetype)}}{Saves the image using the given
+mimetype to the named file}
+\end{twocollist}}
+}
+
+\perlnote{Methods supported by wxPerl are:\par
+\begin{itemize}
+\item{bitmap->SaveFile( name, type )}
+\item{bitmap->SaveFile( name, mimetype )}
+\end{itemize}
+}
+
+\membersection{wxImage::Mirror}\label{wximagemirror}
+
+\constfunc{wxImage}{Mirror}{\param{bool}{ horizontally = TRUE}}
+
+Returns a mirrored copy of the image. The parameter {\it horizontally}
+indicates the orientation.
+
+\membersection{wxImage::Replace}\label{wximagereplace}
+
+\func{void}{Replace}{\param{unsigned char}{ r1}, \param{unsigned char}{ g1}, \param{unsigned char}{ b1},
+\param{unsigned char}{ r2}, \param{unsigned char}{ g2}, \param{unsigned char}{ b2}}
+
+Replaces the colour specified by {\it r1,g1,b1} by the colour {\it r2,g2,b2}.
+
+\membersection{wxImage::Rescale}\label{wximagerescale}
+
+\func{wxImage \&}{Rescale}{\param{int}{ width}, \param{int}{ height}}
+
+Changes the size of the image in-place: after a call to this function, the
+image will have the given width and height.
+
+Returns the (modified) image itself.
+
+\wxheading{See also}
+
+\helpref{Scale}{wximagescale}
+
+\membersection{wxImage::Rotate}\label{wximagerotate}
+
+\func{wxImage}{Rotate}{\param{double}{ angle}, \param{const wxPoint\& }{rotationCentre},
+ \param{bool}{ interpolating = TRUE}, \param{wxPoint*}{ offsetAfterRotation = NULL}}
+
+Rotates the image about the given point, by {\it angle} radians. Passing TRUE
+to {\it interpolating} results in better image quality, but is slower. If the
+image has a mask, then the mask colour is used for the uncovered pixels in the
+rotated image background. Else, black (rgb 0, 0, 0) will be used.
+
+Returns the rotated image, leaving this image intact.
+
+\membersection{wxImage::Rotate90}\label{wximagerotate90}
+
+\constfunc{wxImage}{Rotate90}{\param{bool}{ clockwise = TRUE}}
+
+Returns a copy of the image rotated 90 degrees in the direction
+indicated by {\it clockwise}.
+
\membersection{wxImage::Scale}\label{wximagescale}
-\func{wxImage}{Scale}{\param{int}{ width}, \param{int}{ height}}
+\constfunc{wxImage}{Scale}{\param{int}{ width}, \param{int}{ height}}
Returns a scaled version of the image. This is also useful for
scaling bitmaps in general as the only other way to scale bitmaps
-is to blit a wxMemoryDC into another wxMemoryDC. Windows can do such
-scaling itself but in the GTK port, scaling bitmaps is done using
-this routine internally.
+is to blit a wxMemoryDC into another wxMemoryDC.
+
+It may be mentioned that the GTK port uses this function internally
+to scale bitmaps when using mapping modes in wxDC.
+
+Example:
+
+\begin{verbatim}
+ // get the bitmap from somewhere
+ wxBitmap bmp = ...;
+
+ // rescale it to have size of 32*32
+ if ( bmp.GetWidth() != 32 || bmp.GetHeight() != 32 )
+ {
+ wxImage image(bmp);
+ bmp = wxBitmap(image.Scale(32, 32));
+
+ // another possibility:
+ image.Rescale(32, 32);
+ bmp = image;
+ }
+
+\end{verbatim}
+
+\wxheading{See also}
+
+\helpref{Rescale}{wximagerescale}
\membersection{wxImage::SetData}\label{wximagesetdata}
\func{void}{SetData}{\param{unsigned char*}{data}}
-Sets the image data without performing checks. The data given must have
+Sets the image data without performing checks. The data given must have
the size (width*height*3) or results will be unexpected. Don't use this
method if you aren't sure you know what you are doing.
Sets the mask colour for this image (and tells the image to use the mask).
+\membersection{wxImage::SetOption}\label{wximagesetoption}
+
+\func{void}{SetOption}{\param{const wxString\&}{ name}, \param{const wxString\&}{ value}}
+
+\func{void}{SetOption}{\param{const wxString\&}{ name}, \param{int}{ value}}
+
+Sets a user-defined option. The function is case-insensitive to {\it name}.
+
+For example, when saving as a JPEG file, the option {\bf quality} is
+used, which is a number between 0 and 100 (0 is terrible, 100 is very good).
+
+\wxheading{See also}
+
+\helpref{wxImage::GetOption}{wximagegetoption},\rtfsp
+\helpref{wxImage::GetOptionInt}{wximagegetoptionint},\rtfsp
+\helpref{wxImage::HasOption}{wximagehasoption}
+
+\membersection{wxImage::SetPalette}\label{wximagesetpalette}
+
+\func{void}{SetPalette}{\param{const wxPalette\&}{ palette}}
+
+Associates a palette with the image. The palette may be used when converting
+wxImage to wxBitmap (MSW only at present) or in file save operations (none as yet).
+
\membersection{wxImage::SetRGB}\label{wximagesetrgb}
-\func{void}{SetRGB}{\param{int }{x}, \param{int }{y}, \param{unsigned char }{red}, \param{unsigned char }{blue}, \param{unsigned char }{green}}
+\func{void}{SetRGB}{\param{int }{x}, \param{int }{y}, \param{unsigned char }{red}, \param{unsigned char }{green}, \param{unsigned char }{blue}}
Sets the pixel at the given coordinate. This routine performs bounds-checks
for the coordinate so it can be considered a safe way to manipulate the
data, but in some cases this might be too slow so that the data will have to
-be set directly. In that case you have to get that data by calling GetData().
+be set directly. In that case you will have to get access to the image data
+using the \helpref{GetData}{wximagegetdata} method.
\membersection{wxImage::operator $=$}
\wxheading{See also}
-\helpref{wxImage}{wximage}
+\helpref{wxImage}{wximage},
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}
\latexignore{\rtfignore{\wxheading{Members}}}
Gets the file extension associated with this handler.
+\membersection{wxImageHandler::GetImageCount}\label{wximagehandlergetimagecount}
+
+\func{int}{GetImageCount}{\param{wxInputStream\&}{ stream}}
+
+If the image file contains more than one image and the image handler is capable
+of retrieving these individually, this function will return the number of
+available images.
+
+\docparam{stream}{Opened input stream for reading image data. Currently, the stream must support seeking.}
+
+\wxheading{Return value}
+
+Number of available images. For most image handles, this defaults to 1.
+
\membersection{wxImageHandler::GetType}
\constfunc{long}{GetType}{\void}
Gets the image type associated with this handler.
+\membersection{wxImageHandler::GetMimeType}
+
+\constfunc{wxString}{GetMimeType}{\void}
+
+Gets the MIME type associated with this handler.
+
\membersection{wxImageHandler::LoadFile}\label{wximagehandlerloadfile}
-\func{bool}{LoadFile}{\param{wxImage* }{image}, \param{wxInputStream\&}{ stream}}
+\func{bool}{LoadFile}{\param{wxImage* }{image}, \param{wxInputStream\&}{ stream}, \param{bool}{ verbose=TRUE}, \param{int}{ index=0}}
-Loads a image from a stream, putting the resulting data into {\it image}.
+Loads a image from a stream, putting the resulting data into {\it image}. If the image file contains
+more than one image and the image handler is capable of retrieving these individually, {\it index}
+indicates which image to read from the stream.
\wxheading{Parameters}
\docparam{image}{The image object which is to be affected by this operation.}
-\docparam{stream}{Opened input stream.
-The meaning of {\it stream} is determined by the {\it type} parameter.}
+\docparam{stream}{Opened input stream for reading image data.}
+
+\docparam{verbose}{If set to TRUE, errors reported by the image handler will produce wxLogMessages.}
+
+\docparam{index}{The index of the image in the file (starting from zero).}
\wxheading{Return value}
\wxheading{See also}
-\helpref{wxImage::LoadFile}{wximageloadfile}\\
-\helpref{wxImage::SaveFile}{wximagesavefile}\\
+\helpref{wxImage::LoadFile}{wximageloadfile},
+\helpref{wxImage::SaveFile}{wximagesavefile},
\helpref{wxImageHandler::SaveFile}{wximagehandlersavefile}
\membersection{wxImageHandler::SaveFile}\label{wximagehandlersavefile}
\docparam{image}{The image object which is to be affected by this operation.}
-\docparam{stream}{A stream. The meaning of {\it stream} is determined by the {\it type} parameter.}
+\docparam{stream}{Opened output stream for writing the data.}
\wxheading{Return value}
\wxheading{See also}
-\helpref{wxImage::LoadFile}{wximageloadfile}\\
-\helpref{wxImage::SaveFile}{wximagesavefile}\\
+\helpref{wxImage::LoadFile}{wximageloadfile},
+\helpref{wxImage::SaveFile}{wximagesavefile},
\helpref{wxImageHandler::LoadFile}{wximagehandlerloadfile}
\membersection{wxImageHandler::SetName}
\docparam{extension}{Handler extension.}
+\membersection{wxImageHandler::SetMimeType}\label{wximagehandlersetmimetype}
+
+\func{void}{SetMimeType}{\param{const wxString\& }{mimetype}}
+
+Sets the handler MIME type.
+
+\wxheading{Parameters}
+
+\docparam{mimename}{Handler MIME type.}
+
\membersection{wxImageHandler::SetType}
\func{void}{SetType}{\param{long }{type}}
projects / wxWidgets.git / blobdiff