In this way, the same piece of code may write to a number of different devices,
if the device context is used as a parameter.
-Derived types of wxDC have documentation for specific features
-only, so refer to this section for most device context information.
+Notice that wxDC is an abstract base class and can't be created directly,
+please use \helpref{wxPaintDC}{wxpaintdc}, \helpref{wxClientDC}{wxclientdc},
+\helpref{wxWindowDC}{wxwindowdc}, \helpref{wxScreenDC}{wxscreendc},
+\helpref{wxMemoryDC}{wxmemorydc} or \helpref{wxPrinterDC}{wxprinterdc}.
+
+% VZ: we should really document them instead of this lame excuse, but I don't
+% have time for it now, when it is done please remove this
+Please note that in addition to the versions of the methods documented here,
+there are also versions which accept single {\tt wxPoint} parameter instead of
+two {\tt wxCoord} ones or {\tt wxPoint} and {\tt wxSize} instead of four of
+them.
\wxheading{Derived from}
\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxDC::wxDC}
-
-\func{}{wxDC}{\void}
-
-Constructor.
-
-\membersection{wxDC::\destruct{wxDC}}
-
-\func{}{\destruct{wxDC}}{\void}
-
-Destructor.
-
-\membersection{wxDC::BeginDrawing}\label{wxdcbegindrawing}
-
-\func{void}{BeginDrawing}{\void}
-
-Allows optimization of drawing code under MS Windows. Enclose
-drawing primitives between {\bf BeginDrawing} and {\bf EndDrawing}\rtfsp
-calls.
-
-Drawing to a wxDialog panel device context outside of a
-system-generated OnPaint event {\it requires} this pair of calls to
-enclose drawing code. This is because a Windows dialog box does not have
-a retained device context associated with it, and selections such as pen
-and brush settings would be lost if the device context were obtained and
-released for each drawing operation.
\membersection{wxDC::Blit}\label{wxdcblit}
-\func{bool}{Blit}{\param{long}{ xdest}, \param{long}{ ydest}, \param{long}{ width}, \param{long}{ height},
- \param{wxDC* }{source}, \param{long}{ xsrc}, \param{long}{ ysrc}, \param{int}{ logicalFunc},
- \param{bool }{useMask}}
+\func{bool}{Blit}{\param{wxCoord}{ xdest}, \param{wxCoord}{ ydest}, \param{wxCoord}{ width}, \param{wxCoord}{ height},
+ \param{wxDC* }{source}, \param{wxCoord}{ xsrc}, \param{wxCoord}{ ysrc}, \param{int}{ logicalFunc = wxCOPY},
+ \param{bool }{useMask = false}, \param{wxCoord}{ xsrcMask = -1}, \param{wxCoord}{ ysrcMask = -1}}
Copy from a source DC to this DC, specifying the destination
-coordinates, size of area to copy, source DC, source coordinates, and
-logical function.
+coordinates, size of area to copy, source DC, source coordinates,
+logical function, whether to use a bitmap mask, and mask source position.
\wxheading{Parameters}
\docparam{logicalFunc}{Logical function to use: see \helpref{wxDC::SetLogicalFunction}{wxdcsetlogicalfunction}.}
-\docparam{useMask}{If TRUE, Blit does a transparent blit using the mask that is associated with the bitmap
-selected into the source device context. The Windows implementation does the following:
+\docparam{useMask}{If true, Blit does a transparent blit using the mask that is associated with the bitmap
+selected into the source device context. The Windows implementation does the following if MaskBlt cannot be used:
\begin{enumerate}
\item Creates a temporary bitmap and copies the destination area into it.
This sequence of operations ensures that the source's transparent area need not be black,
and logical functions are supported.
+
+{\bf Note:} on Windows, blitting with masks can be speeded up considerably by compiling
+wxWidgets with the wxUSE\_DC\_CACHE option enabled. You can also influence whether MaskBlt
+or the explicit mask blitting code above is used, by using \helpref{wxSystemOptions}{wxsystemoptions} and
+setting the {\bf no-maskblt} option to 1.
+
}
+\docparam{xsrcMask}{Source x position on the mask. If both xsrcMask and ysrcMask are -1, xsrc and ysrc
+will be assumed for the mask source position. Currently only implemented on Windows.}
+
+\docparam{ysrcMask}{Source y position on the mask. If both xsrcMask and ysrcMask are -1, xsrc and ysrc
+will be assumed for the mask source position. Currently only implemented on Windows.}
+
+
\wxheading{Remarks}
There is partial support for Blit in wxPostScriptDC, under X.
See \helpref{wxMemoryDC}{wxmemorydc} for typical usage.
-wxheading{See also}
+\wxheading{See also}
\helpref{wxMemoryDC}{wxmemorydc}, \helpref{wxBitmap}{wxbitmap}, \helpref{wxMask}{wxmask}
+\begin{comment}
+
+\membersection{wxDC::CacheEnabled}\label{wxdccacheenabled}
+
+\func{static bool}{CacheEnabled}{\void}
+
+On supported platforms (currently only Windows), returns true
+if the DC cache is enabled. The DC cache
+can speed up the \helpref{Blit}{wxdcblit} operation when
+drawing a large number of masked bitmaps.
+
+If using the cache functions in your code, please test for the
+wxUSE\_DC\_CACHEING preprocessor symbol for portability.
+
+\wxheading{See also}
+
+\helpref{wxDC::EnableCache}{wxdcenablecache}, \helpref{wxDC::ClearCache}
+\end{comment}
+
+
+\membersection{wxDC::CalcBoundingBox}\label{wxdccalcboundingbox}
+
+\func{void}{CalcBoundingBox}{\param{wxCoord }{x}, \param{wxCoord }{y}}
+
+Adds the specified point to the bounding box which can be retrieved with
+\helpref{MinX}{wxdcminx}, \helpref{MaxX}{wxdcmaxx} and
+\helpref{MinY}{wxdcminy}, \helpref{MaxY}{wxdcmaxy} functions.
+
+\wxheading{See also}
+
+\helpref{ResetBoundingBox}{wxdcresetboundingbox}
+
+
\membersection{wxDC::Clear}\label{wxdcclear}
\func{void}{Clear}{\void}
Clears the device context using the current background brush.
+\begin{comment}
+
+\membersection{wxDC::ClearCache}\label{wxdcclearcache}
+
+\func{static void}{ClearCache}{\void}
+
+On supported platforms (currently only Windows), clears
+the contents of the DC cache (one bitmap and two Windows device contexts). The DC cache
+can speed up the \helpref{Blit}{wxdcblit} operation when
+drawing a large number of masked bitmaps. You should
+call ClearCache at the end of length DC operations if you wish to only use
+the cache transiently; you should also call it as your application exits.
+
+If using the cache functions in your code, please test for the
+wxUSE\_DC\_CACHEING preprocessor symbol for portability.
+
+\wxheading{See also}
+
+\helpref{wxDC::EnableCache}{wxdcenablecache}, \helpref{wxDC::CacheEnabled}
+\end{comment}
+
+
+\membersection{wxDC::ComputeScaleAndOrigin}\label{wxdccomputescaleandorigin}
+
+\func{virtual void}{ComputeScaleAndOrigin}{\void}
+
+Performs all necessary computations for given platform and context type
+after each change of scale and origin parameters. Usually called automatically
+internally after such changes.
+
+
\membersection{wxDC::CrossHair}\label{wxdccrosshair}
-\func{void}{CrossHair}{\param{long}{ x}, \param{long}{ y}}
+\func{void}{CrossHair}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
Displays a cross hair using the current pen. This is a vertical
and horizontal line the height and width of the window, centred
on the given point.
+
\membersection{wxDC::DestroyClippingRegion}\label{wxdcdestroyclippingregion}
\func{void}{DestroyClippingRegion}{\void}
Destroys the current clipping region so that none of the DC is clipped.
See also \helpref{wxDC::SetClippingRegion}{wxdcsetclippingregion}.
+
\membersection{wxDC::DeviceToLogicalX}\label{wxdcdevicetologicalx}
-\func{long}{DeviceToLogicalX}{\param{long}{ x}}
+\func{wxCoord}{DeviceToLogicalX}{\param{wxCoord}{ x}}
Convert device X coordinate to logical coordinate, using the current
mapping mode.
+
\membersection{wxDC::DeviceToLogicalXRel}\label{wxdcdevicetologicalxrel}
-\func{long}{DeviceToLogicalXRel}{\param{long}{ x}}
+\func{wxCoord}{DeviceToLogicalXRel}{\param{wxCoord}{ x}}
Convert device X coordinate to relative logical coordinate, using the current
-mapping mode. Use this function for converting a width, for example.
+mapping mode but ignoring the x axis orientation.
+Use this function for converting a width, for example.
+
\membersection{wxDC::DeviceToLogicalY}\label{wxdcdevicetologicaly}
-\func{long}{DeviceToLogicalY}{\param{long}{ y}}
+\func{wxCoord}{DeviceToLogicalY}{\param{wxCoord}{ y}}
Converts device Y coordinate to logical coordinate, using the current
mapping mode.
+
\membersection{wxDC::DeviceToLogicalYRel}\label{wxdcdevicetologicalyrel}
-\func{long}{DeviceToLogicalYRel}{\param{long}{ y}}
+\func{wxCoord}{DeviceToLogicalYRel}{\param{wxCoord}{ y}}
Convert device Y coordinate to relative logical coordinate, using the current
-mapping mode. Use this function for converting a height, for example.
+mapping mode but ignoring the y axis orientation.
+Use this function for converting a height, for example.
+
\membersection{wxDC::DrawArc}\label{wxdcdrawarc}
-\func{void}{DrawArc}{\param{long}{ x1}, \param{long}{ y1}, \param{long}{ x2}, \param{long}{ y2}, \param{double}{ xc}, \param{double}{ yc}}
+\func{void}{DrawArc}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}, \param{wxCoord}{ xc}, \param{wxCoord}{ yc}}
Draws an arc of a circle, centred on ({\it xc, yc}), with starting point ({\it x1, y1})
and ending at ({\it x2, y2}). The current pen is used for the outline
The arc is drawn in an anticlockwise direction from the start point to the end point.
+
\membersection{wxDC::DrawBitmap}\label{wxdcdrawbitmap}
-\func{void}{DrawBitmap}{\param{const wxBitmap\&}{ bitmap}, \param{long}{ x}, \param{long}{ y}, \param{bool}{ transparent}}
+\func{void}{DrawBitmap}{\param{const wxBitmap\&}{ bitmap}, \param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{bool}{ transparent}}
-Draw a bitmap on the device context at the specified point. If {\it transparent} is TRUE and the bitmap has
+Draw a bitmap on the device context at the specified point. If {\it transparent} is true and the bitmap has
a transparency mask, the bitmap will be drawn transparently.
+When drawing a mono-bitmap, the current text foreground colour will be used to draw the foreground
+of the bitmap (all bits set to 1), and the current text background colour to draw the background
+(all bits set to 0). See also \helpref{SetTextForeground}{wxdcsettextforeground},
+\helpref{SetTextBackground}{wxdcsettextbackground} and \helpref{wxMemoryDC}{wxmemorydc}.
+
+
+\membersection{wxDC::DrawCheckMark}\label{wxdcdrawcheckmark}
+
+\func{void}{DrawCheckMark}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
+
+\func{void}{DrawCheckMark}{\param{const wxRect \&}{rect}}
+
+Draws a check mark inside the given rectangle.
+
+
+\membersection{wxDC::DrawCircle}\label{wxdcdrawcircle}
+
+\func{void}{DrawCircle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ radius}}
+
+\func{void}{DrawCircle}{\param{const wxPoint\&}{ pt}, \param{wxCoord}{ radius}}
+
+Draws a circle with the given centre and radius.
+
+\wxheading{See also}
+
+\helpref{DrawEllipse}{wxdcdrawellipse}
+
+
\membersection{wxDC::DrawEllipse}\label{wxdcdrawellipse}
-\func{void}{DrawEllipse}{\param{long}{ x}, \param{long}{ y}, \param{long}{ width}, \param{long}{ height}}
+\func{void}{DrawEllipse}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
+
+\func{void}{DrawEllipse}{\param{const wxPoint\&}{ pt}, \param{const wxSize\&}{ size}}
+
+\func{void}{DrawEllipse}{\param{const wxRect\&}{ rect}}
+
+Draws an ellipse contained in the rectangle specified either with the given top
+left corner and the given size or directly. The current pen is used for the
+outline and the current brush for filling the shape.
+
+\wxheading{See also}
+
+\helpref{DrawCircle}{wxdcdrawcircle}
-Draws an ellipse contained in the rectangle with the given top left corner, and with the
-given size. The current pen is used for the outline and the current brush for
-filling the shape.
\membersection{wxDC::DrawEllipticArc}\label{wxdcdrawellipticarc}
-\func{void}{DrawEllipticArc}{\param{long}{ x}, \param{long}{ y}, \param{long}{ width}, \param{long}{ height},
+\func{void}{DrawEllipticArc}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height},
\param{double}{ start}, \param{double}{ end}}
-Draws an arc of an ellipse. The current pen is used for drawing the arc and
-the current brush is used for drawing the pie. This function is currently only available for
-X window and PostScript device contexts.
+Draws an arc of an ellipse. The current pen is used for drawing the arc and
+the current brush is used for drawing the pie.
{\it x} and {\it y} specify the x and y coordinates of the upper-left corner of the rectangle that contains
the ellipse.
-{\it width} and {\it height} specify the width and height of the rectangle that contains
+{\it width} and {\it height} specify the width and height of the rectangle that contains
the ellipse.
{\it start} and {\it end} specify the start and end of the arc relative to the three-o'clock
counter-clockwise motion. If {\it start} is equal to {\it end}, a
complete ellipse will be drawn.
+
\membersection{wxDC::DrawIcon}\label{wxdcdrawicon}
-\func{void}{DrawIcon}{\param{const wxIcon\&}{ icon}, \param{long}{ x}, \param{long}{ y}}
+\func{void}{DrawIcon}{\param{const wxIcon\&}{ icon}, \param{wxCoord}{ x}, \param{wxCoord}{ y}}
Draw an icon on the display (does nothing if the device context is PostScript).
This can be the simplest way of drawing bitmaps on a window.
+
+\membersection{wxDC::DrawLabel}\label{wxdcdrawlabel}
+
+\func{virtual void}{DrawLabel}{\param{const wxString\&}{ text},
+ \param{const wxBitmap\&}{ image},
+ \param{const wxRect\&}{ rect},
+ \param{int}{ alignment = wxALIGN\_LEFT | wxALIGN\_TOP},
+ \param{int}{ indexAccel = -1},
+ \param{wxRect *}{rectBounding = NULL}}
+
+\func{void}{DrawLabel}{\param{const wxString\&}{ text}, \param{const wxRect\&}{ rect},
+ \param{int}{ alignment = wxALIGN\_LEFT | wxALIGN\_TOP},
+ \param{int}{ indexAccel = -1}}
+
+Draw optional bitmap and the text into the given rectangle and aligns it as specified
+by alignment parameter; it also will emphasize the character with the given index if
+it is != -1 and return the bounding rectangle if required.
+
+
\membersection{wxDC::DrawLine}\label{wxdcdrawline}
-\func{void}{DrawLine}{\param{long}{ x1}, \param{long}{ y1}, \param{long}{ x2}, \param{long}{ y2}}
+\func{void}{DrawLine}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}}
Draws a line from the first point to the second. The current pen is used
-for drawing the line.
+for drawing the line. Note that the point $(x2, y2)$ is {\emph not} part of the
+line and is not drawn by this function (this is consistent with the behaviour
+of many other toolkits).
+
\membersection{wxDC::DrawLines}\label{wxdcdrawlines}
-\func{void}{DrawLines}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{long}{ xoffset = 0}, \param{long}{ yoffset = 0}}
+\func{void}{DrawLines}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0}}
-\func{void}{DrawLines}{\param{wxList *}{points}, \param{long}{ xoffset = 0}, \param{long}{ yoffset = 0}}
+\func{void}{DrawLines}{\param{wxList *}{points}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0}}
Draws lines using an array of {\it points} of size {\it n}, or list of
pointers to points, adding the optional offset coordinate. The current
pen is used for drawing the lines. The programmer is responsible for
deleting the list of points.
+\pythonnote{The wxPython version of this method accepts a Python list
+of wxPoint objects.}
+
+\perlnote{The wxPerl version of this method accepts
+ as its first parameter a reference to an array
+ of wxPoint objects.}
+
+
\membersection{wxDC::DrawPolygon}\label{wxdcdrawpolygon}
-\func{void}{DrawPolygon}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{long}{ xoffset = 0}, \param{long}{ yoffset = 0},\\
+\func{void}{DrawPolygon}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0},\\
\param{int }{fill\_style = wxODDEVEN\_RULE}}
-\func{void}{DrawPolygon}{\param{wxList *}{points}, \param{long}{ xoffset = 0}, \param{long}{ yoffset = 0},\\
+\func{void}{DrawPolygon}{\param{wxList *}{points}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0},\\
\param{int }{fill\_style = wxODDEVEN\_RULE}}
Draws a filled polygon using an array of {\it points} of size {\it n},
for filling the shape. Using a transparent brush suppresses filling.
The programmer is responsible for deleting the list of points.
-Note that wxWindows automatically closes the first and last points.
+Note that wxWidgets automatically closes the first and last points.
+
+\pythonnote{The wxPython version of this method accepts a Python list
+of wxPoint objects.}
+
+\perlnote{The wxPerl version of this method accepts
+ as its first parameter a reference to an array
+ of wxPoint objects.}
+
+
+\membersection{wxDC::DrawPolyPolygon}\label{wxdcdrawpolypolygon}
+
+\func{void}{DrawPolyPolygon}{\param{int}{ n}, \param{int}{ count[]}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0},\\
+ \param{int }{fill\_style = wxODDEVEN\_RULE}}
+
+Draws two or more filled polygons using an array of {\it points}, adding the
+optional offset coordinates.
+
+Notice that for the platforms providing a native implementation
+of this function (Windows and PostScript-based wxDC currently), this is more
+efficient than using \helpref{DrawPolygon}{wxdcdrawpolygon} in a loop.
+
+{\it n} specifies the number of polygons to draw, the array {\it count} of size
+{\it n} specifies the number of points in each of the polygons in the
+{\it points} array.
+
+The last argument specifies the fill rule: {\bf wxODDEVEN\_RULE} (the default)
+or {\bf wxWINDING\_RULE}.
+
+The current pen is used for drawing the outline, and the current brush for
+filling the shape. Using a transparent brush suppresses filling.
+
+The polygons maybe disjoint or overlapping. Each polygon specified in a call to
+{\bf DrawPolyPolygon} must be closed. Unlike polygons created by the
+\helpref{DrawPolygon}{wxdcdrawpolygon} member function, the polygons created by
+{\bf DrawPolyPolygon} are not closed automatically.
+
+\pythonnote{Not implemented yet}
+
+\perlnote{Not implemented yet}
+
\membersection{wxDC::DrawPoint}\label{wxdcdrawpoint}
-\func{void}{DrawPoint}{\param{long}{ x}, \param{long}{ y}}
+\func{void}{DrawPoint}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
+
+Draws a point using the color of the current pen. Note that the other properties of the pen are not used, such as width etc..
-Draws a point using the current pen.
\membersection{wxDC::DrawRectangle}\label{wxdcdrawrectangle}
-\func{void}{DrawRectangle}{\param{long}{ x}, \param{long}{ y}, \param{long}{ width}, \param{long}{ height}}
+\func{void}{DrawRectangle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
Draws a rectangle with the given top left corner, and with the given
size. The current pen is used for the outline and the current brush
for filling the shape.
+
+\membersection{wxDC::DrawRotatedText}\label{wxdcdrawrotatedtext}
+
+\func{void}{DrawRotatedText}{\param{const wxString\& }{text}, \param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{double}{ angle}}
+
+Draws the text rotated by {\it angle} degrees.
+
+{\bf NB:} Under Win9x only TrueType fonts can be drawn by this function. In
+particular, a font different from {\tt wxNORMAL\_FONT} should be used as the
+latter is not a TrueType font. {\tt wxSWISS\_FONT} is an example of a font
+which is.
+
+\wxheading{See also}
+
+\helpref{DrawText}{wxdcdrawtext}
+
+
\membersection{wxDC::DrawRoundedRectangle}\label{wxdcdrawroundedrectangle}
-\func{void}{DrawRoundedRectangle}{\param{long}{ x}, \param{long}{ y}, \param{long}{ width}, \param{long}{ height}, \param{double}{ radius = 20}}
+\func{void}{DrawRoundedRectangle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}, \param{double}{ radius}}
Draws a rectangle with the given top left corner, and with the given
size. The corners are quarter-circles using the given radius. The
the strange effects X produces when the corners are too big for
the rectangle.
+
\membersection{wxDC::DrawSpline}\label{wxdcdrawspline}
+\func{void}{DrawSpline}{\param{int }{n}, \param{wxPoint }{points[]}}
+
+Draws a spline between all given control points, using the current
+pen.
+
\func{void}{DrawSpline}{\param{wxList *}{points}}
Draws a spline between all given control points, using the current
-pen. Doesn't delete the wxList and contents. The spline is drawn
-using a series of lines, using an algorithm taken from the X drawing
-program `XFIG'.
+pen. Doesn't delete the wxList and contents.
-\func{void}{DrawSpline}{\param{long}{ x1}, \param{long}{ y1}, \param{long}{ x2}, \param{long}{ y2}, \param{long}{ x3}, \param{long}{ y3}}
+\func{void}{DrawSpline}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}, \param{wxCoord}{ x3}, \param{wxCoord}{ y3}}
Draws a three-point spline using the current pen.
+\pythonnote{The wxPython version of this method accepts a Python list
+of wxPoint objects.}
+
+\perlnote{The wxPerl version of this method accepts a reference to an array
+ of wxPoint objects.}
+
+
\membersection{wxDC::DrawText}\label{wxdcdrawtext}
-\func{void}{DrawText}{\param{const wxString\& }{text}, \param{long}{ x}, \param{long}{ y}}
+\func{void}{DrawText}{\param{const wxString\& }{text}, \param{wxCoord}{ x}, \param{wxCoord}{ y}}
Draws a text string at the specified point, using the current text font,
and the current text foreground and background colours.
to get the dimensions of a text string, which can be used to position the
text more precisely.
+{\bf NB:} under wxGTK the current
+\helpref{logical function}{wxdcgetlogicalfunction} is used by this function
+but it is ignored by wxMSW. Thus, you should avoid using logical functions
+with this function in portable programs.
+
+\begin{comment}
+
+\membersection{wxDC::EnableCache}\label{wxdcenablecache}
+
+\func{static void}{EnableCache}{\param{bool}{ enableCache}}
+
+On supported platforms (currently only Windows), enables the DC cache
+which can speed up the \helpref{Blit}{wxdcblit} operation when
+drawing a large number of masked bitmaps.
+
+If using the cache functions in your code, please test for the
+wxUSE\_DC\_CACHEING preprocessor symbol for portability.
+
+\wxheading{See also}
+
+\helpref{wxDC::CacheEnabled}{wxdccacheenabled}, \helpref{wxDC::ClearCache}
+\end{comment}
+
+
\membersection{wxDC::EndDoc}\label{wxdcenddoc}
\func{void}{EndDoc}{\void}
Ends a document (only relevant when outputting to a printer).
-\membersection{wxDC::EndDrawing}\label{wxdcenddrawing}
-
-\func{void}{EndDrawing}{\void}
-
-Allows optimization of drawing code under MS Windows. Enclose
-drawing primitives between {\bf BeginDrawing} and {\bf EndDrawing}\rtfsp
-calls.
\membersection{wxDC::EndPage}\label{wxdcendpage}
Ends a document page (only relevant when outputting to a printer).
+
\membersection{wxDC::FloodFill}\label{wxdcfloodfill}
-\func{void}{FloodFill}{\param{long}{ x}, \param{long}{ y}, \param{wxColour *}{colour}, \param{int}{ style=wxFLOOD\_SURFACE}}
+\func{bool}{FloodFill}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{const wxColour\&}{ colour}, \param{int}{ style=wxFLOOD\_SURFACE}}
-Flood fills the device context starting from the given point, in the given colour,
-and using a style:
+Flood fills the device context starting from the given point, using
+the {\it current brush colour}, and using a style:
\begin{itemize}\itemsep=0pt
\item wxFLOOD\_SURFACE: the flooding occurs until a colour other than the given colour is encountered.
\item wxFLOOD\_BORDER: the area to be flooded is bounded by the given colour.
\end{itemize}
-{\it Note:} this function is available in MS Windows only.
+Returns false if the operation failed.
+
+{\it Note:} The present implementation for non-Windows platforms may fail to find
+colour borders if the pixels do not match the colour exactly. However the
+function will still return true.
+
\membersection{wxDC::GetBackground}\label{wxdcgetbackground}
-\func{wxBrush\&}{GetBackground}{\void}
+\constfunc{const wxBrush\&}{GetBackground}{\void}
Gets the brush used for painting the background (see \helpref{wxDC::SetBackground}{wxdcsetbackground}).
+
+\membersection{wxDC::GetBackgroundMode}\label{wxdcgetbackgroundmode}
+
+\constfunc{int}{GetBackgroundMode}{\void}
+
+Returns the current background mode: {\tt wxSOLID} or {\tt wxTRANSPARENT}.
+
+\wxheading{See also}
+
+\helpref{SetBackgroundMode}{wxdcsetbackgroundmode}
+
+
\membersection{wxDC::GetBrush}\label{wxdcgetbrush}
-\func{wxBrush\&}{GetBrush}{\void}
+\constfunc{const wxBrush\&}{GetBrush}{\void}
Gets the current brush (see \helpref{wxDC::SetBrush}{wxdcsetbrush}).
+
\membersection{wxDC::GetCharHeight}\label{wxdcgetcharheight}
-\func{long}{GetCharHeight}{\void}
+\func{wxCoord}{GetCharHeight}{\void}
Gets the character height of the currently set font.
+
\membersection{wxDC::GetCharWidth}\label{wxdcgetcharwidth}
-\func{long}{GetCharWidth}{\void}
+\func{wxCoord}{GetCharWidth}{\void}
Gets the average character width of the currently set font.
+
\membersection{wxDC::GetClippingBox}\label{wxdcgetclippingbox}
-\func{void}{GetClippingBox}{\param{long}{ *x}, \param{long}{ *y}, \param{long}{ *width}, \param{long}{ *height}}
+\func{void}{GetClippingBox}{\param{wxCoord}{ *x}, \param{wxCoord}{ *y}, \param{wxCoord}{ *width}, \param{wxCoord}{ *height}}
Gets the rectangle surrounding the current clipping region.
+\pythonnote{No arguments are required and the four values defining the
+rectangle are returned as a tuple.}
+
+\perlnote{This method takes no arguments and returns a four element list
+{\tt ( x, y, width, height )}}
+
+
\membersection{wxDC::GetFont}\label{wxdcgetfont}
-\func{wxFont\&}{GetFont}{\void}
+\constfunc{const wxFont\&}{GetFont}{\void}
+
+Gets the current font. Notice that even although each device context object has
+some default font after creation, this method would return a \texttt{wxNullFont}
+initially and only after calling \helpref{wxDC::SetFont}{wxdcsetfont} a valid
+font is returned.
-Gets the current font (see \helpref{wxDC::SetFont}{wxdcsetfont}).
\membersection{wxDC::GetLogicalFunction}\label{wxdcgetlogicalfunction}
Gets the current logical function (see \helpref{wxDC::SetLogicalFunction}{wxdcsetlogicalfunction}).
+
\membersection{wxDC::GetMapMode}\label{wxdcgetmapmode}
\func{int}{GetMapMode}{\void}
Gets the {\it mapping mode} for the device context (see \helpref{wxDC::SetMapMode}{wxdcsetmapmode}).
-\membersection{wxDC::GetOptimization}\label{wxdcgetoptimization}
-\func{bool}{GetOptimization}{\void}
+\membersection{wxDC::GetPartialTextExtents}\label{wxdcgetpartialtextextents}
+
+\constfunc{bool}{GetPartialTextExtents}{\param{const wxString\& }{text},
+\param{wxArrayInt\& }{widths}}
+
+Fills the {\it widths} array with the widths from the beginning of
+{\it text} to the corresponding character of {\it text}. The generic
+version simply builds a running total of the widths of each character
+using \helpref{GetTextExtent}{wxdcgettextextent}, however if the
+various platforms have a native API function that is faster or more
+accurate than the generic implementation then it should be used
+instead.
+
+\pythonnote{This method only takes the {\it text} parameter and
+ returns a Python list of integers.}
-Returns TRUE if device context optimization is on.
-See \helpref{wxDC::SetOptimization}{wxsetoptimization} for details.
\membersection{wxDC::GetPen}\label{wxdcgetpen}
-\func{wxPen\&}{GetPen}{\void}
+\constfunc{const wxPen\&}{GetPen}{\void}
Gets the current pen (see \helpref{wxDC::SetPen}{wxdcsetpen}).
+
\membersection{wxDC::GetPixel}\label{wxdcgetpixel}
-\func{bool}{GetPixel}{\param{long}{ x}, \param{long}{ y}, \param{wxColour *}{colour}}
+\func{bool}{GetPixel}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxColour *}{colour}}
+
+Gets in {\it colour} the colour at the specified location.
+Not available for wxPostScriptDC or wxMetafileDC.
+
+Note that setting a pixel can be done using \helpref{DrawPoint}{wxdcdrawpoint}.
-Sets {\it colour} to the colour at the specified location. Windows only; an X implementation
-is being worked on. Not available for wxPostScriptDC or wxMetafileDC.
+\pythonnote{For wxPython the wxColour value is returned and is not
+required as a parameter.}
+
+\perlnote{This method only takes the parameters {\tt x} and {\tt y} and returns
+a Wx::Colour value}
+
+\membersection{wxDC::GetPPI}\label{wxdcgetppi}
+
+\constfunc{wxSize}{GetPPI}{\void}
+
+Returns the resolution of the device in pixels per inch.
\membersection{wxDC::GetSize}\label{wxdcgetsize}
-\func{void}{GetSize}{\param{long *}{width}, \param{long *}{height}}
+\constfunc{void}{GetSize}{\param{wxCoord *}{width}, \param{wxCoord *}{height}}
-For a PostScript device context, this gets the maximum size of graphics
-drawn so far on the device context.
+\constfunc{wxSize}{GetSize}{\void}
-For a Windows printer device context, this gets the horizontal and vertical
-resolution. It can be used to scale graphics to fit the page when using
-a Windows printer device context. For example, if {\it maxX} and {\it maxY}\rtfsp
+This gets the horizontal and vertical resolution in device units. It can be used to scale graphics to fit the page.
+For example, if {\it maxX} and {\it maxY}\rtfsp
represent the maximum horizontal and vertical `pixel' values used in your
application, the following code will scale the graphic to fit on the
printer page:
\begin{verbatim}
- long w, h;
+ wxCoord w, h;
dc.GetSize(&w, &h);
double scaleX=(double)(maxX/w);
double scaleY=(double)(maxY/h);
dc.SetUserScale(min(scaleX,scaleY),min(scaleX,scaleY));
\end{verbatim}
+\pythonnote{In place of a single overloaded method name, wxPython
+implements the following methods:\par
+\indented{2cm}{\begin{twocollist}
+\twocolitem{{\bf GetSize()}}{Returns a wxSize}
+\twocolitem{{\bf GetSizeTuple()}}{Returns a 2-tuple (width, height)}
+\end{twocollist}}
+}
+
+\perlnote{In place of a single overloaded method, wxPerl uses:\par
+\indented{2cm}{\begin{twocollist}
+\twocolitem{{\bf GetSize()}}{Returns a Wx::Size}
+\twocolitem{{\bf GetSizeWH()}}{Returns a 2-element list
+ {\tt ( width, height )}}
+\end{twocollist}
+}}
+
+\membersection{wxDC::GetSizeMM}\label{wxdcgetsizemm}
+
+\constfunc{void}{GetSizeMM}{\param{wxCoord *}{width}, \param{wxCoord *}{height}}
+
+\constfunc{wxSize}{GetSizeMM}{\void}
+
+Returns the horizontal and vertical resolution in millimetres.
+
\membersection{wxDC::GetTextBackground}\label{wxdcgettextbackground}
-\func{wxColour\&}{GetTextBackground}{\void}
+\constfunc{const wxColour\&}{GetTextBackground}{\void}
Gets the current text background colour (see \helpref{wxDC::SetTextBackground}{wxdcsettextbackground}).
+
\membersection{wxDC::GetTextExtent}\label{wxdcgettextextent}
-\func{void}{GetTextExtent}{\param{const wxString\& }{string}, \param{long *}{w}, \param{long *}{h},\\
- \param{long *}{descent = NULL}, \param{long *}{externalLeading = NULL}, \param{wxFont *}{font = NULL}}
+\func{void}{GetTextExtent}{\param{const wxString\& }{string}, \param{wxCoord *}{w}, \param{wxCoord *}{h},\\
+ \param{wxCoord *}{descent = NULL}, \param{wxCoord *}{externalLeading = NULL}, \param{wxFont *}{font = NULL}}
Gets the dimensions of the string using the currently selected font.
\rtfsp{\it string} is the text string to measure, {\it w} and {\it h} are
descender, and {\it externalLeading} is any extra vertical space added
to the font by the font designer (usually is zero).
-The optional parameter {\it font} specifies an alternative
-to the currently selected font: but note that this does not
-yet work under Windows, so you need to set a font for
-the device context first.
+If the optional parameter {\it font} is specified and valid, then it is used
+for the text extent calculation. Otherwise the currently selected font is.
See also \helpref{wxFont}{wxfont}, \helpref{wxDC::SetFont}{wxdcsetfont}.
+\pythonnote{The following methods are implemented in wxPython:\par
+\indented{2cm}{\begin{twocollist}
+\twocolitem{{\bf GetTextExtent(string)}}{Returns a 2-tuple, (width, height)}
+\twocolitem{{\bf GetFullTextExtent(string, font=NULL)}}{Returns a
+4-tuple, (width, height, descent, externalLeading) }
+\end{twocollist}}
+}
+
+\perlnote{In wxPerl this method is implemented as
+ {\bf GetTextExtent( string, font = undef )} returning a four element
+ array {\tt ( width, height, descent, externalLeading )}
+}
+
+
\membersection{wxDC::GetTextForeground}\label{wxdcgettextforeground}
-\func{wxColour\&}{GetTextForeground}{\void}
+\constfunc{const wxColour\&}{GetTextForeground}{\void}
Gets the current text foreground colour (see \helpref{wxDC::SetTextForeground}{wxdcsettextforeground}).
+
+\membersection{wxDC::GetUserScale}\label{wxdcgetuserscale}
+
+\func{void}{GetUserScale}{\param{double}{ *x}, \param{double}{ *y}}
+
+Gets the current user scale factor (set by \helpref{SetUserScale}{wxdcsetuserscale}).
+
+\perlnote{In wxPerl this method takes no arguments and return a two element
+ array {\tt ( x, y )}}
+
+
+\membersection{wxDC::GradientFillConcentric}\label{wxdcgradientfillconcentric}
+
+\func{void}{GradientFillConcentric}{\param{const wxRect\&}{ rect}, \param{const wxColour\&}{ initialColour}, \param{const wxColour\&}{ destColour}}
+
+\func{void}{GradientFillConcentric}{\param{const wxRect\&}{ rect}, \param{const wxColour\&}{ initialColour}, \param{const wxColour\&}{ destColour}, \param{const wxPoint\& }{circleCenter}}
+
+Fill the area specified by rect with a radial gradient, starting from
+\arg{initialColour} at the centre of the circle and fading to \arg{destColour}
+on the circle outside.
+
+\arg{circleCenter} are the relative coordinates of centre of the circle in
+the specified \arg{rect}. If not specified, the cercle is placed at the
+centre of rect.
+
+\textbf{Note: } Currently this function is very slow, don't use it for
+real-time drawing.
+
+
+\membersection{wxDC::GradientFillLinear}\label{wxdcgradientfilllinear}
+
+\func{void}{GradientFillLinear}{\param{const wxRect\&}{ rect}, \param{const wxColour\&}{ initialColour}, \param{const wxColour\&}{ destColour}, \param{wxDirection}{ nDirection = wxEAST}}
+
+Fill the area specified by \arg{rect} with a linear gradient, starting from
+\arg{initialColour} and eventually fading to \arg{destColour}. The
+\arg{nDirection} specifies the direction of the colour change, default is to
+use \arg{initialColour} on the left part of the rectangle and
+\arg{destColour} on the right one.
+
+
\membersection{wxDC::LogicalToDeviceX}\label{wxdclogicaltodevicex}
-\func{long}{LogicalToDeviceX}{\param{long}{ x}}
+\func{wxCoord}{LogicalToDeviceX}{\param{wxCoord}{ x}}
Converts logical X coordinate to device coordinate, using the current
mapping mode.
+
\membersection{wxDC::LogicalToDeviceXRel}\label{wxdclogicaltodevicexrel}
-\func{long}{LogicalToDeviceXRel}{\param{long}{ x}}
+\func{wxCoord}{LogicalToDeviceXRel}{\param{wxCoord}{ x}}
Converts logical X coordinate to relative device coordinate, using the current
-mapping mode. Use this for converting a width, for example.
+mapping mode but ignoring the x axis orientation.
+Use this for converting a width, for example.
+
\membersection{wxDC::LogicalToDeviceY}\label{wxdclogicaltodevicey}
-\func{long}{LogicalToDeviceY}{\param{long}{ y}}
+\func{wxCoord}{LogicalToDeviceY}{\param{wxCoord}{ y}}
Converts logical Y coordinate to device coordinate, using the current
mapping mode.
+
\membersection{wxDC::LogicalToDeviceYRel}\label{wxdclogicaltodeviceyrel}
-\func{long}{LogicalToDeviceYRel}{\param{long}{ y}}
+\func{wxCoord}{LogicalToDeviceYRel}{\param{wxCoord}{ y}}
Converts logical Y coordinate to relative device coordinate, using the current
-mapping mode. Use this for converting a height, for example.
+mapping mode but ignoring the y axis orientation.
+Use this for converting a height, for example.
+
\membersection{wxDC::MaxX}\label{wxdcmaxx}
-\func{long}{MaxX}{\void}
+\func{wxCoord}{MaxX}{\void}
Gets the maximum horizontal extent used in drawing commands so far.
+
\membersection{wxDC::MaxY}\label{wxdcmaxy}
-\func{long}{MaxY}{\void}
+\func{wxCoord}{MaxY}{\void}
Gets the maximum vertical extent used in drawing commands so far.
+
\membersection{wxDC::MinX}\label{wxdcminx}
-\func{long}{MinX}{\void}
+\func{wxCoord}{MinX}{\void}
Gets the minimum horizontal extent used in drawing commands so far.
+
\membersection{wxDC::MinY}\label{wxdcminy}
-\func{long}{MinY}{\void}
+\func{wxCoord}{MinY}{\void}
Gets the minimum vertical extent used in drawing commands so far.
+
\membersection{wxDC::Ok}\label{wxdcok}
\func{bool}{Ok}{\void}
-Returns TRUE if the DC is ok to use.
+Returns true if the DC is ok to use.
-\membersection{wxDC::SetDeviceOrigin}\label{wxdcsetdeviceorigin}
-\func{void}{SetDeviceOrigin}{\param{long}{ x}, \param{long}{ y}}
+\membersection{wxDC::ResetBoundingBox}\label{wxdcresetboundingbox}
-Sets the device origin (i.e., the origin in pixels after scaling has been
-applied).
+\func{void}{ResetBoundingBox}{\void}
+
+Resets the bounding box: after a call to this function, the bounding box
+doesn't contain anything.
+
+\wxheading{See also}
+
+\helpref{CalcBoundingBox}{wxdccalcboundingbox}
+
+
+\membersection{wxDC::SetAxisOrientation}\label{wxdcsetaxisorientation}
+
+\func{void}{SetAxisOrientation}{\param{bool}{ xLeftRight},
+ \param{bool}{ yBottomUp}}
+
+Sets the x and y axis orientation (i.e., the direction from lowest to
+highest values on the axis). The default orientation is
+x axis from left to right and y axis from top down.
+
+\wxheading{Parameters}
+
+\docparam{xLeftRight}{True to set the x axis orientation to the natural
+left to right orientation, false to invert it.}
+
+\docparam{yBottomUp}{True to set the y axis orientation to the natural
+bottom up orientation, false to invert it.}
-This function may be useful in Windows printing
-operations for placing a graphic on a page.
\membersection{wxDC::SetBackground}\label{wxdcsetbackground}
Sets the current background brush for the DC.
+
\membersection{wxDC::SetBackgroundMode}\label{wxdcsetbackgroundmode}
\func{void}{SetBackgroundMode}{\param{int}{ mode}}
{\it mode} may be one of wxSOLID and wxTRANSPARENT. This setting determines
whether text will be drawn with a background colour or not.
+
+\membersection{wxDC::SetBrush}\label{wxdcsetbrush}
+
+\func{void}{SetBrush}{\param{const wxBrush\& }{brush}}
+
+Sets the current brush for the DC.
+
+If the argument is wxNullBrush, the current brush is selected out of the device
+context, and the original brush restored, allowing the current brush to
+be destroyed safely.
+
+See also \helpref{wxBrush}{wxbrush}.
+
+See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
+when drawing into a monochrome bitmap.
+
+
\membersection{wxDC::SetClippingRegion}\label{wxdcsetclippingregion}
-\func{void}{SetClippingRegion}{\param{long}{ x}, \param{long}{ y}, \param{long}{ width}, \param{long}{ height}}
+\func{void}{SetClippingRegion}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
-\func{void}{SetClippingRegion}{\param{const wxRegion\&}{ region}}
+\func{void}{SetClippingRegion}{\param{const wxPoint\& }{pt}, \param{const wxSize\& }{sz}}
-Sets the clipping region for the DC. The clipping region is an area
-to which drawing is restricted. Possible uses for the clipping region are for clipping text
-or for speeding up window redraws when only a known area of the screen is damaged.
+\func{void}{SetClippingRegion}{\param{const wxRect\&}{ rect}}
-\wxheading{See also}
+\func{void}{SetClippingRegion}{\param{const wxRegion\&}{ region}}
-\helpref{wxDC::DestroyClippingRegion}{wxdcdestroyclippingregion}, \helpref{wxRegion}{wxregion}
+Sets the clipping region for this device context to the intersection of the
+given region described by the parameters of this method and the previously set
+clipping region. You should call
+\helpref{DestroyClippingRegion}{wxdcdestroyclippingregion} if you want to set
+the clipping region exactly to the region specified.
-\membersection{wxDC::SetPalette}\label{wxdcsetpalette}
+The clipping region is an area to which drawing is restricted. Possible uses
+for the clipping region are for clipping text or for speeding up window redraws
+when only a known area of the screen is damaged.
-\func{void}{SetPalette}{\param{const wxPalette\& }{palette}}
+\wxheading{See also}
-If this is a window DC or memory DC, assigns the given palette to the window
-or bitmap associated with the DC. If the argument is wxNullPalette, the current
-palette is selected out of the device context, and the original palette
-restored.
+\helpref{wxDC::DestroyClippingRegion}{wxdcdestroyclippingregion}, \helpref{wxRegion}{wxregion}
-See \helpref{wxPalette}{wxpalette} for further details.
-\membersection{wxDC::SetBrush}\label{wxdcsetbrush}
+\membersection{wxDC::SetDeviceOrigin}\label{wxdcsetdeviceorigin}
-\func{void}{SetBrush}{\param{const wxBrush\& }{brush}}
+\func{void}{SetDeviceOrigin}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
-Sets the current brush for the DC.
+Sets the device origin (i.e., the origin in pixels after scaling has been
+applied).
-If the argument is wxNullBrush, the current brush is selected out of the device
-context, and the original brush restored, allowing the current brush to
-be destroyed safely.
+This function may be useful in Windows printing
+operations for placing a graphic on a page.
-See also \helpref{wxBrush}{wxbrush}.
\membersection{wxDC::SetFont}\label{wxdcsetfont}
\func{void}{SetFont}{\param{const wxFont\& }{font}}
-Sets the current font for the DC.
-
-If the argument is wxNullFont, the current font is selected out of the device
-context, and the original font restored, allowing the current font to
-be destroyed safely.
+Sets the current font for the DC. It must be a valid font, in particular you
+should not pass {\tt wxNullFont} to this method.
See also \helpref{wxFont}{wxfont}.
+
\membersection{wxDC::SetLogicalFunction}\label{wxdcsetlogicalfunction}
\func{void}{SetLogicalFunction}{\param{int}{ function}}
The default is wxCOPY, which simply draws with the current colour.
The others combine the current colour and the background using a
-logical operation. wxXOR is commonly used for drawing rubber bands or
+logical operation. wxINVERT is commonly used for drawing rubber bands or
moving outlines, since drawing twice reverts to the original colour.
+
\membersection{wxDC::SetMapMode}\label{wxdcsetmapmode}
\func{void}{SetMapMode}{\param{int}{ int}}
in X, text drawing isn't handled consistently with the mapping mode; a
font is always specified in point size. However, setting the {\it
user scale} (see \helpref{wxDC::SetUserScale}{wxdcsetuserscale}) scales the text appropriately. In
-Windows, scaleable TrueType fonts are always used; in X, results depend
+Windows, scalable TrueType fonts are always used; in X, results depend
on availability of fonts, but usually a reasonable match is found.
-Note that the coordinate origin should ideally be selectable, but for
-now is always at the top left of the screen/printer.
+The coordinate origin is always at the top left of the screen/printer.
-Drawing to a Windows printer device context under UNIX
-uses the current mapping mode, but mapping mode is currently ignored for
-PostScript output.
+Drawing to a Windows printer device context uses the current mapping mode,
+but mapping mode is currently ignored for PostScript output.
The mapping mode can be one of the following:
\twocolitem{wxMM\_TEXT}{Each logical unit is 1 pixel.}
\end{twocollist}
-\membersection{wxDC::SetOptimization}\label{wxsetoptimization}
-\func{void}{SetOptimization}{\param{bool }{optimize}}
+\membersection{wxDC::SetPalette}\label{wxdcsetpalette}
-If {\it optimize} is TRUE (the default), this function sets optimization mode on.
-This currently means that under X, the device context will not try to set a pen or brush
-property if it is known to be set already. This approach can fall down
-if non-wxWindows code is using the same device context or window, for example
-when the window is a panel on which the windowing system draws panel items.
-The wxWindows device context 'memory' will now be out of step with reality.
+\func{void}{SetPalette}{\param{const wxPalette\& }{palette}}
+
+If this is a window DC or memory DC, assigns the given palette to the window
+or bitmap associated with the DC. If the argument is wxNullPalette, the current
+palette is selected out of the device context, and the original palette
+restored.
+
+See \helpref{wxPalette}{wxpalette} for further details.
-Setting optimization off, drawing, then setting it back on again, is a trick
-that must occasionally be employed.
\membersection{wxDC::SetPen}\label{wxdcsetpen}
If the argument is wxNullPen, the current pen is selected out of the device
context, and the original pen restored.
+See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
+when drawing into a monochrome bitmap.
+
+
\membersection{wxDC::SetTextBackground}\label{wxdcsettextbackground}
\func{void}{SetTextBackground}{\param{const wxColour\& }{colour}}
Sets the current text background colour for the DC.
+
\membersection{wxDC::SetTextForeground}\label{wxdcsettextforeground}
\func{void}{SetTextForeground}{\param{const wxColour\& }{colour}}
Sets the current text foreground colour for the DC.
+See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
+when drawing into a monochrome bitmap.
+
+
\membersection{wxDC::SetUserScale}\label{wxdcsetuserscale}
\func{void}{SetUserScale}{\param{double}{ xScale}, \param{double}{ yScale}}
Sets the user scaling factor, useful for applications which require
`zooming'.
+
\membersection{wxDC::StartDoc}\label{wxdcstartdoc}
\func{bool}{StartDoc}{\param{const wxString\& }{message}}
Starts a document (only relevant when outputting to a printer).
-Message is a message to show whilst printing.
+Message is a message to show while printing.
+
\membersection{wxDC::StartPage}\label{wxdcstartpage}
Starts a document page (only relevant when outputting to a printer).
+\section{\class{wxDCClipper}}\label{wxdcclipper}
+
+This is a small helper class which sets the specified DC to its constructor
+clipping region and then automatically destroys it in its destructor. Using
+it ensures that an unwanted clipping region is not left set on the DC.
+
+\wxheading{Derived from}
+
+No base class
+
+\wxheading{Include files}
+
+<wx/dc.h>
+
+\wxheading{See also}
+
+\helpref{wxDC}{wxdc}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
+
+\membersection{wxDCClipper::wxDCClipper}\label{wxdcclipperctor}
+
+\func{}{wxDCClipper}{\param{wxDC\& }{dc}, \param{wxCoord }{x},\param{wxCoord }{y},\param{wxCoord }{w},\param{wxCoord }{h},}
+
+\func{}{wxDCClipper}{\param{wxDC\& }{dc}, \param{const wxRect\&}{ rect}}
+
+Constructor: sets the clipping region for the given device context to the
+specified rectangle.
+
+
+\membersection{wxDCClipper::\destruct{wxDCClipper}}\label{wxdcclipperdtor}
+
+\func{}{\destruct{wxDCClipper}}{\void}
+
+Destructor: destroys the clipping region set in the constructor.
+
projects / wxWidgets.git / blobdiff