+ echo $ac_n "checking for --enable-statbmp""... $ac_c" 1>&6
+echo "configure:6657: checking for --enable-statbmp" >&5
+ no_cache=0
+ # Check whether --enable-statbmp or --disable-statbmp was given.
+if test "${enable_statbmp+set}" = set; then
+ enableval="$enable_statbmp"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbmp='wxUSE_STATBMP=yes'
+ else
+ ac_cv_use_statbmp='wxUSE_STATBMP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBMP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbmp='wxUSE_STATBMP='$DEFAULT_wxUSE_STATBMP
+
+fi
+
+
+ eval "$ac_cv_use_statbmp"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbmp >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBMP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-statbox""... $ac_c" 1>&6
+echo "configure:6696: checking for --enable-statbox" >&5
+ no_cache=0
+ # Check whether --enable-statbox or --disable-statbox was given.
+if test "${enable_statbox+set}" = set; then
+ enableval="$enable_statbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbox='wxUSE_STATBOX=yes'
+ else
+ ac_cv_use_statbox='wxUSE_STATBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbox='wxUSE_STATBOX='$DEFAULT_wxUSE_STATBOX
+
+fi
+
+
+ eval "$ac_cv_use_statbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-statline""... $ac_c" 1>&6
+echo "configure:6735: checking for --enable-statline" >&5
+ no_cache=0
+ # Check whether --enable-statline or --disable-statline was given.
+if test "${enable_statline+set}" = set; then
+ enableval="$enable_statline"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statline='wxUSE_STATLINE=yes'
+ else
+ ac_cv_use_statline='wxUSE_STATLINE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATLINE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statline='wxUSE_STATLINE='$DEFAULT_wxUSE_STATLINE
+
+fi
+
+
+ eval "$ac_cv_use_statline"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statline >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATLINE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-stattext""... $ac_c" 1>&6
+echo "configure:6774: checking for --enable-stattext" >&5
+ no_cache=0
+ # Check whether --enable-stattext or --disable-stattext was given.
+if test "${enable_stattext+set}" = set; then
+ enableval="$enable_stattext"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_stattext='wxUSE_STATTEXT=yes'
+ else
+ ac_cv_use_stattext='wxUSE_STATTEXT=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATTEXT" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_stattext='wxUSE_STATTEXT='$DEFAULT_wxUSE_STATTEXT
+
+fi
+
+
+ eval "$ac_cv_use_stattext"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_stattext >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATTEXT" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-statusbar""... $ac_c" 1>&6
+echo "configure:6813: checking for --enable-statusbar" >&5
+ no_cache=0
+ # Check whether --enable-statusbar or --disable-statusbar was given.
+if test "${enable_statusbar+set}" = set; then
+ enableval="$enable_statusbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=yes'
+ else
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATUSBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statusbar='wxUSE_STATUSBAR='$DEFAULT_wxUSE_STATUSBAR
+
+fi
+
+
+ eval "$ac_cv_use_statusbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statusbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATUSBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tabdialog""... $ac_c" 1>&6
+echo "configure:6852: checking for --enable-tabdialog" >&5
+ no_cache=0
+ # Check whether --enable-tabdialog or --disable-tabdialog was given.
+if test "${enable_tabdialog+set}" = set; then
+ enableval="$enable_tabdialog"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=yes'
+ else
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TABDIALOG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG='$DEFAULT_wxUSE_TABDIALOG
+
+fi
+
+
+ eval "$ac_cv_use_tabdialog"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tabdialog >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TABDIALOG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-textctrl""... $ac_c" 1>&6
+echo "configure:6891: checking for --enable-textctrl" >&5
+ no_cache=0
+ # Check whether --enable-textctrl or --disable-textctrl was given.
+if test "${enable_textctrl+set}" = set; then
+ enableval="$enable_textctrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL=yes'
+ else
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TEXTCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_textctrl='wxUSE_TEXTCTRL='$DEFAULT_wxUSE_TEXTCTRL
+
+fi
+
+
+ eval "$ac_cv_use_textctrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_textctrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TEXTCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-togglebtn""... $ac_c" 1>&6
+echo "configure:6930: checking for --enable-togglebtn" >&5
+ no_cache=0
+ # Check whether --enable-togglebtn or --disable-togglebtn was given.
+if test "${enable_togglebtn+set}" = set; then
+ enableval="$enable_togglebtn"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=yes'
+ else
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOGGLEBTN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_togglebtn='wxUSE_TOGGLEBTN='$DEFAULT_wxUSE_TOGGLEBTN
+
+fi
+
+
+ eval "$ac_cv_use_togglebtn"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_togglebtn >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOGGLEBTN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-toolbar""... $ac_c" 1>&6
+echo "configure:6969: checking for --enable-toolbar" >&5
+ no_cache=0
+ # Check whether --enable-toolbar or --disable-toolbar was given.
+if test "${enable_toolbar+set}" = set; then
+ enableval="$enable_toolbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=yes'
+ else
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_toolbar='wxUSE_TOOLBAR='$DEFAULT_wxUSE_TOOLBAR
+
+fi
+
+
+ eval "$ac_cv_use_toolbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_toolbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tbarnative""... $ac_c" 1>&6
+echo "configure:7008: checking for --enable-tbarnative" >&5
+ no_cache=0
+ # Check whether --enable-tbarnative or --disable-tbarnative was given.
+if test "${enable_tbarnative+set}" = set; then
+ enableval="$enable_tbarnative"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=yes'
+ else
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR_NATIVE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE='$DEFAULT_wxUSE_TOOLBAR_NATIVE
+
+fi
+
+
+ eval "$ac_cv_use_tbarnative"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tbarnative >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLBAR_NATIVE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tbarsmpl""... $ac_c" 1>&6
+echo "configure:7047: checking for --enable-tbarsmpl" >&5
+ no_cache=0
+ # Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
+if test "${enable_tbarsmpl+set}" = set; then
+ enableval="$enable_tbarsmpl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=yes'
+ else
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR_SIMPLE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE='$DEFAULT_wxUSE_TOOLBAR_SIMPLE
+
+fi
+
+
+ eval "$ac_cv_use_tbarsmpl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tbarsmpl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLBAR_SIMPLE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-treectrl""... $ac_c" 1>&6
+echo "configure:7086: checking for --enable-treectrl" >&5
+ no_cache=0
+ # Check whether --enable-treectrl or --disable-treectrl was given.
+if test "${enable_treectrl+set}" = set; then
+ enableval="$enable_treectrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_treectrl='wxUSE_TREECTRL=yes'
+ else
+ ac_cv_use_treectrl='wxUSE_TREECTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TREECTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_treectrl='wxUSE_TREECTRL='$DEFAULT_wxUSE_TREECTRL
+
+fi
+
+
+ eval "$ac_cv_use_treectrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_treectrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TREECTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tipwindow""... $ac_c" 1>&6
+echo "configure:7125: checking for --enable-tipwindow" >&5
+ no_cache=0
+ # Check whether --enable-tipwindow or --disable-tipwindow was given.
+if test "${enable_tipwindow+set}" = set; then
+ enableval="$enable_tipwindow"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tipwindow='wxUSE_TIPWINDOW=yes'
+ else
+ ac_cv_use_tipwindow='wxUSE_TIPWINDOW=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TIPWINDOW" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tipwindow='wxUSE_TIPWINDOW='$DEFAULT_wxUSE_TIPWINDOW
+
+fi
+
+
+ eval "$ac_cv_use_tipwindow"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tipwindow >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TIPWINDOW" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-popupwin""... $ac_c" 1>&6
+echo "configure:7164: checking for --enable-popupwin" >&5
+ no_cache=0
+ # Check whether --enable-popupwin or --disable-popupwin was given.
+if test "${enable_popupwin+set}" = set; then
+ enableval="$enable_popupwin"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_popupwin='wxUSE_POPUPWIN=yes'
+ else
+ ac_cv_use_popupwin='wxUSE_POPUPWIN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_POPUPWIN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_popupwin='wxUSE_POPUPWIN='$DEFAULT_wxUSE_POPUPWIN
+
+fi
+
+
+ eval "$ac_cv_use_popupwin"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_popupwin >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_POPUPWIN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-commondlg""... $ac_c" 1>&6
+echo "configure:7205: checking for --enable-commondlg" >&5
+ no_cache=0
+ # Check whether --enable-commondlg or --disable-commondlg was given.
+if test "${enable_commondlg+set}" = set; then
+ enableval="$enable_commondlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=yes'
+ else
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COMMONDLGS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS='$DEFAULT_wxUSE_COMMONDLGS
+
+fi
+
+
+ eval "$ac_cv_use_commondlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_commondlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COMMONDLGS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-choicedlg""... $ac_c" 1>&6
+echo "configure:7244: checking for --enable-choicedlg" >&5
+ no_cache=0
+ # Check whether --enable-choicedlg or --disable-choicedlg was given.
+if test "${enable_choicedlg+set}" = set; then
+ enableval="$enable_choicedlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG=yes'
+ else
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHOICEDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_choicedlg='wxUSE_CHOICEDLG='$DEFAULT_wxUSE_CHOICEDLG
+
+fi
+
+
+ eval "$ac_cv_use_choicedlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_choicedlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHOICEDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-coldlg""... $ac_c" 1>&6
+echo "configure:7283: checking for --enable-coldlg" >&5
+ no_cache=0
+ # Check whether --enable-coldlg or --disable-coldlg was given.
+if test "${enable_coldlg+set}" = set; then
+ enableval="$enable_coldlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_coldlg='wxUSE_COLOURDLG=yes'
+ else
+ ac_cv_use_coldlg='wxUSE_COLOURDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COLOURDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_coldlg='wxUSE_COLOURDLG='$DEFAULT_wxUSE_COLOURDLG
+
+fi
+
+
+ eval "$ac_cv_use_coldlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_coldlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COLOURDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-filedlg""... $ac_c" 1>&6
+echo "configure:7322: checking for --enable-filedlg" >&5
+ no_cache=0
+ # Check whether --enable-filedlg or --disable-filedlg was given.
+if test "${enable_filedlg+set}" = set; then
+ enableval="$enable_filedlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_filedlg='wxUSE_FILEDLG=yes'
+ else
+ ac_cv_use_filedlg='wxUSE_FILEDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FILEDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_filedlg='wxUSE_FILEDLG='$DEFAULT_wxUSE_FILEDLG
+
+fi
+
+
+ eval "$ac_cv_use_filedlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_filedlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FILEDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-finddlg""... $ac_c" 1>&6
+echo "configure:7361: checking for --enable-finddlg" >&5
+ no_cache=0
+ # Check whether --enable-finddlg or --disable-finddlg was given.
+if test "${enable_finddlg+set}" = set; then
+ enableval="$enable_finddlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_finddlg='wxUSE_FINDREPLDLG=yes'
+ else
+ ac_cv_use_finddlg='wxUSE_FINDREPLDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FINDREPLDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_finddlg='wxUSE_FINDREPLDLG='$DEFAULT_wxUSE_FINDREPLDLG
+
+fi
+
+
+ eval "$ac_cv_use_finddlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_finddlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FINDREPLDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-fontdlg""... $ac_c" 1>&6
+echo "configure:7400: checking for --enable-fontdlg" >&5
+ no_cache=0
+ # Check whether --enable-fontdlg or --disable-fontdlg was given.
+if test "${enable_fontdlg+set}" = set; then
+ enableval="$enable_fontdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fontdlg='wxUSE_FONTDLG=yes'
+ else
+ ac_cv_use_fontdlg='wxUSE_FONTDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FONTDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fontdlg='wxUSE_FONTDLG='$DEFAULT_wxUSE_FONTDLG
+
+fi
+
+
+ eval "$ac_cv_use_fontdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fontdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FONTDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-dirdlg""... $ac_c" 1>&6
+echo "configure:7439: checking for --enable-dirdlg" >&5
+ no_cache=0
+ # Check whether --enable-dirdlg or --disable-dirdlg was given.
+if test "${enable_dirdlg+set}" = set; then
+ enableval="$enable_dirdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=yes'
+ else
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DIRDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dirdlg='wxUSE_DIRDLG='$DEFAULT_wxUSE_DIRDLG
+
+fi
+
+
+ eval "$ac_cv_use_dirdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dirdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DIRDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-msgdlg""... $ac_c" 1>&6
+echo "configure:7478: checking for --enable-msgdlg" >&5
+ no_cache=0
+ # Check whether --enable-msgdlg or --disable-msgdlg was given.
+if test "${enable_msgdlg+set}" = set; then
+ enableval="$enable_msgdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_msgdlg='wxUSE_MSGDLG=yes'
+ else
+ ac_cv_use_msgdlg='wxUSE_MSGDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MSGDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_msgdlg='wxUSE_MSGDLG='$DEFAULT_wxUSE_MSGDLG
+
+fi
+
+
+ eval "$ac_cv_use_msgdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_msgdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MSGDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-numberdlg""... $ac_c" 1>&6
+echo "configure:7517: checking for --enable-numberdlg" >&5
+ no_cache=0
+ # Check whether --enable-numberdlg or --disable-numberdlg was given.
+if test "${enable_numberdlg+set}" = set; then
+ enableval="$enable_numberdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG=yes'
+ else
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NUMBERDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_numberdlg='wxUSE_NUMBERDLG='$DEFAULT_wxUSE_NUMBERDLG
+
+fi
+
+
+ eval "$ac_cv_use_numberdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_numberdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NUMBERDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-splash""... $ac_c" 1>&6
+echo "configure:7556: checking for --enable-splash" >&5
+ no_cache=0
+ # Check whether --enable-splash or --disable-splash was given.
+if test "${enable_splash+set}" = set; then
+ enableval="$enable_splash"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splash='wxUSE_SPLASH=yes'
+ else
+ ac_cv_use_splash='wxUSE_SPLASH=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLASH" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splash='wxUSE_SPLASH='$DEFAULT_wxUSE_SPLASH
+
+fi
+
+
+ eval "$ac_cv_use_splash"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splash >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLASH" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-textdlg""... $ac_c" 1>&6
+echo "configure:7595: checking for --enable-textdlg" >&5
+ no_cache=0
+ # Check whether --enable-textdlg or --disable-textdlg was given.
+if test "${enable_textdlg+set}" = set; then
+ enableval="$enable_textdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_textdlg='wxUSE_TEXTDLG=yes'
+ else
+ ac_cv_use_textdlg='wxUSE_TEXTDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TEXTDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_textdlg='wxUSE_TEXTDLG='$DEFAULT_wxUSE_TEXTDLG
+
+fi
+
+
+ eval "$ac_cv_use_textdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_textdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TEXTDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tipdlg""... $ac_c" 1>&6
+echo "configure:7634: checking for --enable-tipdlg" >&5
+ no_cache=0
+ # Check whether --enable-tipdlg or --disable-tipdlg was given.
+if test "${enable_tipdlg+set}" = set; then
+ enableval="$enable_tipdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=yes'
+ else
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STARTUP_TIPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS='$DEFAULT_wxUSE_STARTUP_TIPS
+
+fi
+
+
+ eval "$ac_cv_use_tipdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tipdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STARTUP_TIPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-progressdlg""... $ac_c" 1>&6
+echo "configure:7673: checking for --enable-progressdlg" >&5
+ no_cache=0
+ # Check whether --enable-progressdlg or --disable-progressdlg was given.
+if test "${enable_progressdlg+set}" = set; then
+ enableval="$enable_progressdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=yes'
+ else
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PROGRESSDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG='$DEFAULT_wxUSE_PROGRESSDLG
+
+fi
+
+
+ eval "$ac_cv_use_progressdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_progressdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PROGRESSDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-wizarddlg""... $ac_c" 1>&6
+echo "configure:7712: checking for --enable-wizarddlg" >&5
+ no_cache=0
+ # Check whether --enable-wizarddlg or --disable-wizarddlg was given.
+if test "${enable_wizarddlg+set}" = set; then
+ enableval="$enable_wizarddlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wizarddlg='wxUSE_WIZARDDLG=yes'
+ else
+ ac_cv_use_wizarddlg='wxUSE_WIZARDDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WIZARDDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wizarddlg='wxUSE_WIZARDDLG='$DEFAULT_wxUSE_WIZARDDLG
+
+fi
+
+
+ eval "$ac_cv_use_wizarddlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wizarddlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WIZARDDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-menus""... $ac_c" 1>&6
+echo "configure:7753: checking for --enable-menus" >&5
+ no_cache=0
+ # Check whether --enable-menus or --disable-menus was given.
+if test "${enable_menus+set}" = set; then
+ enableval="$enable_menus"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_menus='wxUSE_MENUS=yes'
+ else
+ ac_cv_use_menus='wxUSE_MENUS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MENUS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_menus='wxUSE_MENUS='$DEFAULT_wxUSE_MENUS
+
+fi
+
+
+ eval "$ac_cv_use_menus"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_menus >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MENUS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-miniframe""... $ac_c" 1>&6
+echo "configure:7792: checking for --enable-miniframe" >&5
+ no_cache=0
+ # Check whether --enable-miniframe or --disable-miniframe was given.
+if test "${enable_miniframe+set}" = set; then
+ enableval="$enable_miniframe"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_miniframe='wxUSE_MINIFRAME=yes'
+ else
+ ac_cv_use_miniframe='wxUSE_MINIFRAME=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MINIFRAME" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_miniframe='wxUSE_MINIFRAME='$DEFAULT_wxUSE_MINIFRAME
+
+fi
+
+
+ eval "$ac_cv_use_miniframe"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_miniframe >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MINIFRAME" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-tooltips""... $ac_c" 1>&6
+echo "configure:7831: checking for --enable-tooltips" >&5
+ no_cache=0
+ # Check whether --enable-tooltips or --disable-tooltips was given.
+if test "${enable_tooltips+set}" = set; then
+ enableval="$enable_tooltips"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS=yes'
+ else
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLTIPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS='$DEFAULT_wxUSE_TOOLTIPS
+
+fi
+
+
+ eval "$ac_cv_use_tooltips"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tooltips >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLTIPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-splines""... $ac_c" 1>&6
+echo "configure:7870: checking for --enable-splines" >&5
+ no_cache=0
+ # Check whether --enable-splines or --disable-splines was given.
+if test "${enable_splines+set}" = set; then
+ enableval="$enable_splines"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splines='wxUSE_SPLINES=yes'
+ else
+ ac_cv_use_splines='wxUSE_SPLINES=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLINES" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splines='wxUSE_SPLINES='$DEFAULT_wxUSE_SPLINES
+
+fi
+
+
+ eval "$ac_cv_use_splines"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splines >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLINES" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6
+echo "configure:7909: checking for --enable-validators" >&5
+ no_cache=0
+ # Check whether --enable-validators or --disable-validators was given.
+if test "${enable_validators+set}" = set; then
+ enableval="$enable_validators"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_validators='wxUSE_VALIDATORS=yes'
+ else
+ ac_cv_use_validators='wxUSE_VALIDATORS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_VALIDATORS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_validators='wxUSE_VALIDATORS='$DEFAULT_wxUSE_VALIDATORS
+
+fi
+
+
+ eval "$ac_cv_use_validators"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_validators >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_VALIDATORS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6
+echo "configure:7948: checking for --enable-busyinfo" >&5
+ no_cache=0
+ # Check whether --enable-busyinfo or --disable-busyinfo was given.
+if test "${enable_busyinfo+set}" = set; then
+ enableval="$enable_busyinfo"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=yes'
+ else
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BUSYINFO" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO='$DEFAULT_wxUSE_BUSYINFO
+
+fi
+
+
+ eval "$ac_cv_use_busyinfo"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_busyinfo >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BUSYINFO" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6
+echo "configure:7987: checking for --enable-joystick" >&5
+ no_cache=0
+ # Check whether --enable-joystick or --disable-joystick was given.
+if test "${enable_joystick+set}" = set; then
+ enableval="$enable_joystick"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
+ else
+ ac_cv_use_joystick='wxUSE_JOYSTICK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
+
+fi
+
+
+ eval "$ac_cv_use_joystick"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_JOYSTICK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6
+echo "configure:8026: checking for --enable-metafile" >&5
+ no_cache=0
+ # Check whether --enable-metafile or --disable-metafile was given.
+if test "${enable_metafile+set}" = set; then
+ enableval="$enable_metafile"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_metafile='wxUSE_METAFILE=yes'
+ else
+ ac_cv_use_metafile='wxUSE_METAFILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_METAFILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_metafile='wxUSE_METAFILE='$DEFAULT_wxUSE_METAFILE
+
+fi
+
+
+ eval "$ac_cv_use_metafile"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_metafile >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_METAFILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-dragimage""... $ac_c" 1>&6
+echo "configure:8065: checking for --enable-dragimage" >&5
+ no_cache=0
+ # Check whether --enable-dragimage or --disable-dragimage was given.
+if test "${enable_dragimage+set}" = set; then
+ enableval="$enable_dragimage"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE=yes'
+ else
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DRAGIMAGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dragimage='wxUSE_DRAGIMAGE='$DEFAULT_wxUSE_DRAGIMAGE
+
+fi
+
+
+ eval "$ac_cv_use_dragimage"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dragimage >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DRAGIMAGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking for --enable-palette""... $ac_c" 1>&6
+echo "configure:8106: checking for --enable-palette" >&5
+ no_cache=0
+ # Check whether --enable-palette or --disable-palette was given.
+if test "${enable_palette+set}" = set; then
+ enableval="$enable_palette"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_palette='wxUSE_PALETTE=yes'
+ else
+ ac_cv_use_palette='wxUSE_PALETTE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PALETTE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_palette='wxUSE_PALETTE='$DEFAULT_wxUSE_PALETTE
+
+fi
+
+
+ eval "$ac_cv_use_palette"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_palette >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PALETTE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-image""... $ac_c" 1>&6
+echo "configure:8145: checking for --enable-image" >&5
+ no_cache=0
+ # Check whether --enable-image or --disable-image was given.
+if test "${enable_image+set}" = set; then
+ enableval="$enable_image"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_image='wxUSE_IMAGE=yes'
+ else
+ ac_cv_use_image='wxUSE_IMAGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IMAGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_image='wxUSE_IMAGE='$DEFAULT_wxUSE_IMAGE
+
+fi
+
+
+ eval "$ac_cv_use_image"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_image >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IMAGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6
+echo "configure:8184: checking for --enable-gif" >&5
+ no_cache=0
+ # Check whether --enable-gif or --disable-gif was given.
+if test "${enable_gif+set}" = set; then
+ enableval="$enable_gif"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gif='wxUSE_GIF=yes'
+ else
+ ac_cv_use_gif='wxUSE_GIF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GIF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gif='wxUSE_GIF='$DEFAULT_wxUSE_GIF
+
+fi
+
+
+ eval "$ac_cv_use_gif"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gif >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GIF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6
+echo "configure:8223: checking for --enable-pcx" >&5
+ no_cache=0
+ # Check whether --enable-pcx or --disable-pcx was given.
+if test "${enable_pcx+set}" = set; then
+ enableval="$enable_pcx"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pcx='wxUSE_PCX=yes'
+ else
+ ac_cv_use_pcx='wxUSE_PCX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PCX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pcx='wxUSE_PCX='$DEFAULT_wxUSE_PCX
+
+fi
+
+
+ eval "$ac_cv_use_pcx"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pcx >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PCX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-iff""... $ac_c" 1>&6
+echo "configure:8262: checking for --enable-iff" >&5
+ no_cache=0
+ # Check whether --enable-iff or --disable-iff was given.
+if test "${enable_iff+set}" = set; then
+ enableval="$enable_iff"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_iff='wxUSE_IFF=yes'
+ else
+ ac_cv_use_iff='wxUSE_IFF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IFF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_iff='wxUSE_IFF='$DEFAULT_wxUSE_IFF
+
+fi
+
+
+ eval "$ac_cv_use_iff"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_iff >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IFF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6
+echo "configure:8301: checking for --enable-pnm" >&5
+ no_cache=0
+ # Check whether --enable-pnm or --disable-pnm was given.
+if test "${enable_pnm+set}" = set; then
+ enableval="$enable_pnm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pnm='wxUSE_PNM=yes'
+ else
+ ac_cv_use_pnm='wxUSE_PNM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PNM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pnm='wxUSE_PNM='$DEFAULT_wxUSE_PNM
+
+fi
+
+
+ eval "$ac_cv_use_pnm"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PNM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-xpm""... $ac_c" 1>&6
+echo "configure:8340: checking for --enable-xpm" >&5
+ no_cache=0
+ # Check whether --enable-xpm or --disable-xpm was given.
+if test "${enable_xpm+set}" = set; then
+ enableval="$enable_xpm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_xpm='wxUSE_XPM=yes'
+ else
+ ac_cv_use_xpm='wxUSE_XPM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_XPM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_xpm='wxUSE_XPM='$DEFAULT_wxUSE_XPM
+
+fi
+
+
+ eval "$ac_cv_use_xpm"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_xpm >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_XPM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking for --enable-ico_cur""... $ac_c" 1>&6
+echo "configure:8379: checking for --enable-ico_cur" >&5
+ no_cache=0
+ # Check whether --enable-ico_cur or --disable-ico_cur was given.
+if test "${enable_ico_cur+set}" = set; then
+ enableval="$enable_ico_cur"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_ico_cur='wxUSE_ICO_CUR=yes'
+ else
+ ac_cv_use_ico_cur='wxUSE_ICO_CUR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ICO_CUR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_ico_cur='wxUSE_ICO_CUR='$DEFAULT_wxUSE_ICO_CUR
+
+fi
+
+
+ eval "$ac_cv_use_ico_cur"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_ico_cur >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ICO_CUR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+fi
+
+case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ LEX_STEM="lexyy"
+ ;;
+ *)
+ PATH_IFS=':'
+ LEX_STEM="lex.yy"
+ ;;
+esac
+
+
+
+ echo "saving argument cache $wx_arg_cache_file"
+ mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file}
+
+
+
+echo $ac_n "checking for toolkit""... $ac_c" 1>&6
+echo "configure:8437: checking for toolkit" >&5
+
+if test "$wxUSE_GUI" = "yes"; then
+
+ if test "$USE_BEOS" = 1; then
+ { echo "configure: error: BeOS GUI is not supported yet, use --disable-gui" 1>&2; exit 1; }
+ fi
+
+ if test "$TOOLKIT_GIVEN" = 1; then
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ eval "$var=`echo \$value | sed -e "s/yes/1/" -e "s/no/0/"`"
+ done
+ else
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ if test "$has_toolkit_in_cache" != 1; then
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ else
+ var=DEFAULT_wxUSE_$toolkit
+ fi
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+ fi
+
+ NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} \
+ + ${wxUSE_WINE:-0} + ${wxUSE_MSW:-0} + ${wxUSE_MGL:-0} + ${wxUSE_MICROWIN:-0} + ${wxUSE_X11:-0}`
+
+ case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
+ esac
+
+ case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ { echo "configure: error: Please specify a toolkit - cannot determine the default for ${host}" 1>&2; exit 1; }
+ ;;
+ *)
+ { echo "configure: error: Please specify at most one toolkit (may be some are cached?)" 1>&2; exit 1; }
+ esac
+
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" != x; then
+ cache_var=CACHE_$toolkit
+ eval "cache=\$${cache_var}"
+ if test "$cache" = 1; then
+ echo "$var=$value" >> ${wx_arg_cache_file}
+ fi
+ if test "$value" = 1; then
+ toolkit_echo=`echo $toolkit | tr [A-Z] [a-z]`
+ echo "$ac_t""$toolkit_echo" 1>&6
+ fi
+ fi
+ done
+else
+ echo "$ac_t""base ($host_alias hosted) only" 1>&6
+fi
+
+
+wants_win32=0
+doesnt_want_win32=0
+case "${host}" in
+ *-*-cygwin*)
+ if test "$wxUSE_MSW" = 1 ; then
+ wants_win32=1
+ else
+ doesnt_want_win32=1
+ fi
+ ;;
+ *-*-mingw*)
+ wants_win32=1
+ ;;
+esac
+
+if test "$wants_win32" = 1 ; then
+ USE_UNIX=0
+ USE_WIN32=1
+ cat >> confdefs.h <<\EOF
+#define __WIN32__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define __WIN95__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define __WINDOWS__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define __GNUWIN32__ 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define STRICT 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define WINVER 0x0400
+EOF
+
+fi
+if test "$doesnt_want_win32" = 1 ; then
+ USE_UNIX=1
+ USE_WIN32=0
+fi
+
+if test "$USE_UNIX" = 1 ; then
+ wxUSE_UNIX=yes
+ cat >> confdefs.h <<\EOF
+#define __UNIX__ 1
+EOF
+
+fi
+
+
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+if test "$build" != "$host" ; then
+ if test "$USE_WIN32" = 1 -o "$USE_DOS" = 1 -o "$USE_UNIX"; then
+ CC=$host_alias-gcc
+ CXX=$host_alias-c++
+ AR=$host_alias-ar
+ RANLIB=$host_alias-ranlib
+ DLLTOOL=$host_alias-dlltool
+ RESCOMP=$host_alias-windres
+ LD=$host_alias-ld
+ NM=$host_alias-nm
+ STRIP=$host_alias-strip
+ else
+ { echo "configure: error: $build_alias -> $host_alias cross compilation not supported yet." 1>&2; exit 1; }
+ fi
+fi
+
+CFLAGS=${CFLAGS:=}
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8625: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8655: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8706: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:8738: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 8749 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:8754: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:8780: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:8785: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8794: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:8813: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:8846: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 8861 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:8867: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 8878 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:8884: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 8895 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:8901: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
+echo "configure:8927: checking whether ${CC-cc} needs -traditional" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_pattern="Autoconf.*'x'"
+ cat > conftest.$ac_ext <<EOF
+#line 8933 "configure"
+#include "confdefs.h"
+#include <sgtty.h>
+Autoconf TIOCGETP
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=yes
+else
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+ if test $ac_cv_prog_gcc_traditional = no; then
+ cat > conftest.$ac_ext <<EOF
+#line 8951 "configure"
+#include "confdefs.h"
+#include <termio.h>
+Autoconf TCGETA
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+ fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
+ if test $ac_cv_prog_gcc_traditional = yes; then
+ CC="$CC -traditional"
+ fi
+fi
+
+
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+CXXFLAGS=${CXXFLAGS:=}
+for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8988: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CXX" && break
+done
+test -n "$CXX" || CXX="gcc"
+
+
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:9020: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 9031 "configure"
+#include "confdefs.h"
+
+int main(){return(0);}
+EOF
+if { (eval echo configure:9036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cxx_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cxx_cross=no
+ else
+ ac_cv_prog_cxx_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cxx_works=no
+fi
+rm -fr conftest*
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
+if test $ac_cv_prog_cxx_works = no; then
+ { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:9062: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
+echo "configure:9067: checking whether we are using GNU C++" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.C <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9076: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gxx=yes
+else
+ ac_cv_prog_gxx=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gxx" 1>&6
+
+if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+
+ac_test_CXXFLAGS="${CXXFLAGS+set}"
+ac_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS=
+echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
+echo "configure:9095: checking whether ${CXX-g++} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.cc
+if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
+ ac_cv_prog_cxx_g=yes
+else
+ ac_cv_prog_cxx_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS="$ac_save_CXXFLAGS"
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:9138: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:9169: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:9209: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+case ${INSTALL} in
+ /* ) # Absolute
+ ;;
+ *)
+ INSTALL=`pwd`/${INSTALL} ;;
+esac
+
+
+case "${host}" in
+
+ powerpc-*-darwin* )
+ INSTALL_PROGRAM="cp -fp"
+ INSTALL_DATA="cp -fp"
+ ;;
+ *)
+ ;;
+esac
+
+# Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:9283: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP="true"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+echo $ac_n "checking if make is GNU make""... $ac_c" 1>&6
+echo "configure:9312: checking if make is GNU make" >&5
+if eval "test \"`echo '$''{'wx_cv_prog_makeisgnu'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ if ( ${SHELL-sh} -c "${MAKE-make} --version" 2> /dev/null |
+ egrep -s GNU > /dev/null); then
+ wx_cv_prog_makeisgnu="yes"
+ else
+ wx_cv_prog_makeisgnu="no"
+ fi
+
+fi
+
+echo "$ac_t""$wx_cv_prog_makeisgnu" 1>&6
+
+if test "x$wx_cv_prog_makeisgnu" = "xyes"; then
+ IF_GNU_MAKE=""
+else
+ IF_GNU_MAKE="#"
+fi
+
+
+
+if test "x$wx_cv_prog_makeisgnu" != "xyes"; then
+echo $ac_n "checking if make supports VPATH""... $ac_c" 1>&6
+echo "configure:9338: checking if make supports VPATH" >&5
+if eval "test \"`echo '$''{'wx_cv_prog_makevpath'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+cat - << EOF > confMake
+check : file
+ cp \$? \$@
+ cp \$? final_file
+EOF
+
+if test ! -d sub ; then
+ mkdir sub
+fi
+echo dummy > sub/file
+${MAKE-make} -f confMake VPATH=sub 2>&5 > /dev/null
+RESULT=$?
+rm -f sub/file check final_file confMake
+rmdir sub
+if test "$RESULT" = 0; then
+ wx_cv_prog_makevpath="yes"
+else
+ wx_cv_prog_makevpath="no"
+fi
+
+fi
+
+echo "$ac_t""$wx_cv_prog_makevpath" 1>&6
+
+if test "x$wx_cv_prog_makevpath" != "xyes"; then
+{ echo "configure: error:
+You need a make-utility that is able to use the variable
+VPATH correctly.
+If your version of make does not support VPATH correctly,
+please install GNU-make (possibly as gmake), and start
+configure with the following command:
+export MAKE=gmake; ./configure for sh-type shells
+setenv MAKE gmake; ./configure for csh-type shells
+Also please do remember to use gmake in this case every time
+you are trying to compile.
+" 1>&2; exit 1; }
+fi fi
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:9385: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_YACC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:9419: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$LEXLIB"
+then
+ case "$LEX" in
+ flex*) ac_lib=fl ;;
+ *) ac_lib=l ;;
+ esac
+ echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:9453: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 9461 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap();
+
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:9472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LEXLIB="-l$ac_lib"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:9496: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+if test "$wxUSE_MAC" != 1; then
+ for ac_hdr in strings.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9523: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9528 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9533: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+fi
+
+for ac_hdr in stdlib.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9565: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9570 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9575: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in malloc.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9605: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9610 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9615: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9645: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9650 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9655: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in wchar.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9685: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9690 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+if test "$ac_cv_header_wchar_h" != "yes"; then
+ for ac_hdr in wcstr.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9727: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9732 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9737: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+fi
+
+
+for ac_hdr in fnmatch.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9770: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9775 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9780: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+if test "x$ac_cv_header_fnmatch_h" = "xyes"; then
+ for ac_func in fnmatch
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:9811: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9816 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:9839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+fi
+
+for ac_hdr in langinfo.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9869: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9874 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9879: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+if test "$wxUSE_GUI" = "yes"; then
+ if test "$wxUSE_UNIX" = "yes"; then
+ for ac_hdr in X11/XKBlib.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:9912: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9917 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:9922: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ fi
+fi
+
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:9953: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 9958 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:10007: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_const=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:10028: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 10035 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:10042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+
+echo $ac_n "checking size of char""... $ac_c" 1>&6
+echo "configure:10069: checking size of char" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_char=1
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10077 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(char));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10088: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_char=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_char=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_char" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_CHAR $ac_cv_sizeof_char
+EOF
+
+
+echo $ac_n "checking size of short""... $ac_c" 1>&6
+echo "configure:10108: checking size of short" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_short=2
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10116 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(short));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_short=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_short=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_short" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+EOF
+
+
+echo $ac_n "checking size of void *""... $ac_c" 1>&6
+echo "configure:10147: checking size of void *" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_void_p=4
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10155 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(void *));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_void_p=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_void_p=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
+EOF
+
+
+echo $ac_n "checking size of int""... $ac_c" 1>&6
+echo "configure:10186: checking size of int" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_int=4
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10194 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(int));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_int=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_int=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_int" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+EOF
+
+
+echo $ac_n "checking size of long""... $ac_c" 1>&6
+echo "configure:10225: checking size of long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_long=4
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10233 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(long));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_long=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_long=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+EOF
+
+
+
+case "${host}" in
+ arm-*-linux* )
+ echo $ac_n "checking size of long long""... $ac_c" 1>&6
+echo "configure:10267: checking size of long long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_long_long=8
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10275 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(long long));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_long_long=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_long_long=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+EOF
+
+
+ ;;
+ * )
+ echo $ac_n "checking size of long long""... $ac_c" 1>&6
+echo "configure:10308: checking size of long long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_sizeof_long_long=0
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10316 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+main()
+{
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%d\n", sizeof(long long));
+ exit(0);
+}
+EOF
+if { (eval echo configure:10327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_sizeof_long_long=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_sizeof_long_long=0
+fi
+rm -fr conftest*
+fi
+
+fi
+echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+EOF
+
+
+esac
+
+echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6
+echo "configure:10349: checking size of wchar_t" >&5
+if eval "test \"`echo '$''{'wx_cv_sizeof_wchar_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ if test "$cross_compiling" = yes; then
+ wx_cv_sizeof_wchar_t=4
+
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10359 "configure"
+#include "confdefs.h"
+
+ #ifdef HAVE_WCHAR_H
+ # ifdef __CYGWIN__
+ # include <stddef.h>
+ # endif
+ # include <wchar.h>
+ #endif
+ #ifdef HAVE_STDLIB_H
+ # include <stdlib.h>
+ #endif
+ #include <stdio.h>
+ int main()
+ {
+ FILE *f=fopen("conftestval", "w");
+ if (!f) exit(1);
+ fprintf(f, "%i", sizeof(wchar_t));
+ exit(0);
+ }
+
+EOF
+if { (eval echo configure:10381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ wx_cv_sizeof_wchar_t=`cat conftestval`
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ wx_cv_sizeof_wchar_t=0
+fi
+rm -fr conftest*
+fi
+
+
+fi
+
+echo "$ac_t""$wx_cv_sizeof_wchar_t" 1>&6
+
+cat >> confdefs.h <<EOF
+#define SIZEOF_WCHAR_T $wx_cv_sizeof_wchar_t
+EOF
+
+
+# Check whether --enable-largefile or --disable-largefile was given.
+if test "${enable_largefile+set}" = set; then
+ enableval="$enable_largefile"
+ :
+fi
+
+if test "$enable_largefile" != no; then
+ wx_largefile=no
+
+ echo $ac_n "checking for _FILE_OFFSET_BITS value needed for large files""... $ac_c" 1>&6
+echo "configure:10413: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+if eval "test \"`echo '$''{'ac_cv_sys_file_offset_bits'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 10419 "configure"
+#include "confdefs.h"
+#define _FILE_OFFSET_BITS 64
+ #include <sys/types.h>
+int main() {
+typedef struct {
+ unsigned int field: sizeof(off_t) == 8;
+} wxlf;
+
+; return 0; }
+EOF
+if { (eval echo configure:10430: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sys_file_offset_bits=64
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_sys_file_offset_bits=no
+fi
+rm -f conftest*
+
+
+fi
+
+echo "$ac_t""$ac_cv_sys_file_offset_bits" 1>&6
+
+ if test "$ac_cv_sys_file_offset_bits" != no; then
+ wx_largefile=yes
+ cat >> confdefs.h <<EOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+EOF
+
+ fi
+
+ if test "x$wx_largefile" != "xyes"; then
+
+ echo $ac_n "checking for _LARGE_FILES value needed for large files""... $ac_c" 1>&6
+echo "configure:10457: checking for _LARGE_FILES value needed for large files" >&5
+if eval "test \"`echo '$''{'ac_cv_sys_large_files'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 10463 "configure"
+#include "confdefs.h"
+#define _LARGE_FILES 1
+ #include <sys/types.h>
+int main() {
+typedef struct {
+ unsigned int field: sizeof(off_t) == 8;
+} wxlf;
+
+; return 0; }
+EOF
+if { (eval echo configure:10474: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sys_large_files=1
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_sys_large_files=no
+fi
+rm -f conftest*
+
+
+fi
+
+echo "$ac_t""$ac_cv_sys_large_files" 1>&6
+
+ if test "$ac_cv_sys_large_files" != no; then
+ wx_largefile=yes
+ cat >> confdefs.h <<EOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+EOF
+
+ fi
+
+ fi
+
+ echo $ac_n "checking if large file support is available""... $ac_c" 1>&6
+echo "configure:10501: checking if large file support is available" >&5
+ if test "x$wx_largefile" = "xyes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LARGEFILE_SUPPORT 1
+EOF
+
+ fi
+ echo "$ac_t""$wx_largefile" 1>&6
+fi
+
+
+echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+echo "configure:10513: checking whether byte ordering is bigendian" >&5
+if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+cat > conftest.$ac_ext <<EOF
+#line 10520 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:10531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+cat > conftest.$ac_ext <<EOF
+#line 10535 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:10546: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_bigendian=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_bigendian=no
+fi
+rm -f conftest*
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+ ac_cv_c_bigendian=unknown
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10566 "configure"
+#include "confdefs.h"
+main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+if { (eval echo configure:10579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_bigendian=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_bigendian=yes
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = unknown; then
+ echo "configure: warning: Assuming little-endian target machine - this may be overriden by adding the line "ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}" to config.cache file" 1>&2
+fi
+if test $ac_cv_c_bigendian = yes; then
+ cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+fi
+
+
+echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
+echo "configure:10607: checking how to run the C++ preprocessor" >&5
+if test -z "$CXXCPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+ CXXCPP="${CXX-g++} -E"
+ cat > conftest.$ac_ext <<EOF
+#line 10620 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:10625: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CXXCPP=/lib/cpp
+fi
+rm -f conftest*
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+fi
+fi
+CXXCPP="$ac_cv_prog_CXXCPP"
+echo "$ac_t""$CXXCPP" 1>&6
+
+
+ if test "$cross_compiling" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define wxUSE_IOSTREAMH 1
+EOF
+
+ else
+
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+ for ac_hdr in iostream
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:10669: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 10674 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:10679: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
projects / wxWidgets.git / blobdiff