+
+dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
+dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
+dnl also defines GSTUFF_PKG_ERRORS on error
+AC_DEFUN(PKG_CHECK_MODULES, [
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ AC_MSG_CHECKING(for $2)
+
+ if $PKG_CONFIG --exists "$2" ; then
+ AC_MSG_RESULT(yes)
+ succeeded=yes
+
+ AC_MSG_CHECKING($1_CFLAGS)
+ $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
+ AC_MSG_RESULT($$1_CFLAGS)
+
+ AC_MSG_CHECKING($1_LIBS)
+ $1_LIBS=`$PKG_CONFIG --libs "$2"`
+ AC_MSG_RESULT($$1_LIBS)
+ else
+ $1_CFLAGS=""
+ $1_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+ ifelse([$4], ,echo $$1_PKG_ERRORS,)
+ fi
+
+ AC_SUBST($1_CFLAGS)
+ AC_SUBST($1_LIBS)
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+ ifelse([$3], , :, [$3])
+ else
+ ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
+ fi
+])
+
+
+
+# Configure paths for SDL
+# Sam Lantinga 9/21/99
+# stolen from Manish Singh
+# stolen back from Frank Belew
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
+dnl
+AC_DEFUN([AM_PATH_SDL],
+[dnl
+dnl Get the cflags and libraries from the sdl-config script
+dnl
+AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)],
+ sdl_prefix="$withval", sdl_prefix="")
+AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
+ sdl_exec_prefix="$withval", sdl_exec_prefix="")
+AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program],
+ , enable_sdltest=yes)
+
+ if test x$sdl_exec_prefix != x ; then
+ sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
+ if test x${SDL_CONFIG+set} != xset ; then
+ SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
+ fi
+ fi
+ if test x$sdl_prefix != x ; then
+ sdl_args="$sdl_args --prefix=$sdl_prefix"
+ if test x${SDL_CONFIG+set} != xset ; then
+ SDL_CONFIG=$sdl_prefix/bin/sdl-config
+ fi
+ fi
+
+ AC_REQUIRE([AC_CANONICAL_TARGET])
+ PATH="$prefix/bin:$prefix/usr/bin:$PATH"
+ AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
+ min_sdl_version=ifelse([$1], ,0.11.0,$1)
+ AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
+ no_sdl=""
+ if test "$SDL_CONFIG" = "no" ; then
+ no_sdl=yes
+ else
+ SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
+ SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
+
+ sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+ if test "x$enable_sdltest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $SDL_CFLAGS"
+ LIBS="$LIBS $SDL_LIBS"
+dnl
+dnl Now check if the installed SDL is sufficiently new. (Also sanity
+dnl checks the results of sdl-config to some extent
+dnl
+ rm -f conf.sdltest
+ AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "SDL.h"
+
+char*
+my_strdup (char *str)
+{
+ char *new_str;
+
+ if (str)
+ {
+ new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
+ strcpy (new_str, str);
+ }
+ else
+ new_str = NULL;
+
+ return new_str;
+}
+
+int main (int argc, char *argv[])
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ /* This hangs on some systems (?)
+ system ("touch conf.sdltest");
+ */
+ { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = my_strdup("$min_sdl_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_sdl_version");
+ exit(1);
+ }
+
+ if (($sdl_major_version > major) ||
+ (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
+ (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
+ printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
+ printf("*** best to upgrade to the required version.\n");
+ printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
+ printf("*** to point to the correct copy of sdl-config, and remove the file\n");
+ printf("*** config.cache before re-running configure\n");
+ return 1;
+ }
+}
+
+],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_sdl" = x ; then
+ AC_MSG_RESULT(yes)
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT(no)
+ if test "$SDL_CONFIG" = "no" ; then
+ echo "*** The sdl-config script installed by SDL could not be found"
+ echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the SDL_CONFIG environment variable to the"
+ echo "*** full path to sdl-config."
+ else
+ if test -f conf.sdltest ; then
+ :
+ else
+ echo "*** Could not run SDL test program, checking why..."
+ CFLAGS="$CFLAGS $SDL_CFLAGS"
+ LIBS="$LIBS $SDL_LIBS"
+ AC_TRY_LINK([
+#include <stdio.h>
+#include "SDL.h"
+
+int main(int argc, char *argv[])
+{ return 0; }
+#undef main
+#define main K_and_R_C_main
+], [ return 0; ],
+ [ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding SDL or finding the wrong"
+ echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+ [ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means SDL was incorrectly installed"
+ echo "*** or that you have moved SDL since it was installed. In the latter case, you"
+ echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ SDL_CFLAGS=""
+ SDL_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+ AC_SUBST(SDL_CFLAGS)
+ AC_SUBST(SDL_LIBS)
+ rm -f conf.sdltest
+])
+
+dnl ---------------------------------------------------------------------------
+dnl Support macros for makefiles generated by BAKEFILE.
+dnl ---------------------------------------------------------------------------
+
+dnl Lots of compiler & linker detection code contained here was taken from
+dnl wxWindows configure.in script (see http://www.wxwindows.org)
+
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_GNUMAKE
+dnl
+dnl Detects GNU make
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_GNUMAKE,
+[
+ dnl does make support "-include" (only GNU make does AFAIK)?
+ AC_CACHE_CHECK([if make is GNU make], bakefile_cv_prog_makeisgnu,
+ [
+ if ( ${SHELL-sh} -c "${MAKE-make} --version" 2> /dev/null |
+ egrep -s GNU > /dev/null); then
+ bakefile_cv_prog_makeisgnu="yes"
+ else
+ bakefile_cv_prog_makeisgnu="no"
+ fi
+ ])
+
+ if test "x$bakefile_cv_prog_makeisgnu" = "xyes"; then
+ IF_GNU_MAKE=""
+ else
+ IF_GNU_MAKE="#"
+ fi
+ AC_SUBST(IF_GNU_MAKE)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_PLATFORM
+dnl
+dnl Detects platform and sets PLATFORM_XXX variables accordingly
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_PLATFORM,
+[
+ PLATFORM_UNIX=0
+ PLATFORM_WIN32=0
+ PLATFORM_MSDOS=0
+ PLATFORM_MAC=0
+ PLATFORM_MACOSX=0
+ PLATFORM_OS2=0
+
+ if test "x$BAKEFILE_FORCE_PLATFORM" = "x"; then
+ case "${BAKEFILE_HOST}" in
+ *-*-cygwin* | *-*-mingw32* )
+ PLATFORM_WIN32=1
+ ;;
+ *-pc-msdosdjgpp )
+ PLATFORM_MSDOS=1
+ ;;
+ *-pc-os2_emx | *-pc-os2-emx )
+ PLATFORM_OS2=1
+ ;;
+ powerpc-*-darwin* )
+ PLATFORM_MAC=1
+ PLATFORM_MACOSX=1
+ ;;
+ * )
+ PLATFORM_UNIX=1
+ ;;
+ esac
+ else
+ case "$BAKEFILE_FORCE_PLATFORM" in
+ win32 )
+ PLATFORM_WIN32=1
+ ;;
+ msdos )
+ PLATFORM_MSDOS=1
+ ;;
+ os2 )
+ PLATFORM_OS2=1
+ ;;
+ darwin )
+ PLATFORM_MAC=1
+ PLATFORM_MACOSX=1
+ ;;
+ unix )
+ PLATFORM_UNIX=1
+ ;;
+ * )
+ AC_MSG_ERROR([Unknown platform: $BAKEFILE_FORCE_PLATFORM])
+ ;;
+ esac
+ fi
+
+ AC_SUBST(PLATFORM_UNIX)
+ AC_SUBST(PLATFORM_WIN32)
+ AC_SUBST(PLATFORM_MSDOS)
+ AC_SUBST(PLATFORM_MAC)
+ AC_SUBST(PLATFORM_MACOSX)
+ AC_SUBST(PLATFORM_OS2)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_PLATFORM_SPECIFICS
+dnl
+dnl Sets misc platform-specific settings
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_PLATFORM_SPECIFICS,
+[
+ AC_ARG_ENABLE([omf], [ --enable-omf use OMF object format (OS/2)],
+ [bk_os2_use_omf="$enableval"])
+
+ case "${BAKEFILE_HOST}" in
+ *-*-darwin* )
+ dnl For Unix to MacOS X porting instructions, see:
+ dnl http://fink.sourceforge.net/doc/porting/porting.html
+ CFLAGS="$CFLAGS -fno-common"
+ CXXFLAGS="$CXXFLAGS -fno-common"
+ ;;
+
+ *-pc-os2_emx | *-pc-os2-emx )
+ if test "x$bk_os2_use_omf" = "xyes" ; then
+ AR=emxomfar
+ RANLIB=:
+ LDFLAGS="-Zomf $LDFLAGS"
+ CFLAGS="-Zomf $CFLAGS"
+ CXXFLAGS="-Zomf $CXXFLAGS"
+ OS2_LIBEXT="lib"
+ else
+ OS2_LIBEXT="a"
+ fi
+ ;;
+ esac
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_SUFFIXES
+dnl
+dnl Detects shared various suffixes for shared libraries, libraries, programs,
+dnl plugins etc.
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_SUFFIXES,
+[
+ SO_SUFFIX="so"
+ SO_SUFFIX_MODULE="so"
+ EXEEXT=""
+ LIBPREFIX="lib"
+ LIBEXT=".a"
+ DLLPREFIX="lib"
+ DLLPREFIX_MODULE=""
+ DLLIMP_SUFFIX=""
+
+ case "${BAKEFILE_HOST}" in
+ *-hp-hpux* )
+ SO_SUFFIX="sl"
+ SO_SUFFIX_MODULE="sl"
+ ;;
+ *-*-aix* )
+ dnl quoting from
+ dnl http://www-1.ibm.com/servers/esdd/articles/gnu.html:
+ dnl Both archive libraries and shared libraries on AIX have an
+ dnl .a extension. This will explain why you can't link with an
+ dnl .so and why it works with the name changed to .a.
+ SO_SUFFIX="a"
+ SO_SUFFIX_MODULE="a"
+ ;;
+ *-*-cygwin* | *-*-mingw32* )
+ SO_SUFFIX="dll"
+ SO_SUFFIX_MODULE="dll"
+ DLLIMP_SUFFIX="dll.a"
+ EXEEXT=".exe"
+ DLLPREFIX=""
+ ;;
+ *-pc-msdosdjgpp )
+ EXEEXT=".exe"
+ DLLPREFIX=""
+ ;;
+ *-pc-os2_emx | *-pc-os2-emx )
+ SO_SUFFIX="dll"
+ SO_SUFFIX_MODULE="dll"
+ DLLIMP_SUFFIX=$OS2_LIBEXT
+ EXEEXT=".exe"
+ DLLPREFIX=""
+ LIBPREFIX=""
+ LIBEXT=".$OS2_LIBEXT"
+ ;;
+ powerpc-*-darwin* )
+ SO_SUFFIX="dylib"
+ SO_SUFFIX_MODULE="bundle"
+ ;;
+ esac
+
+ if test "x$DLLIMP_SUFFIX" = "x" ; then
+ DLLIMP_SUFFIX="$SO_SUFFIX"
+ fi
+
+ AC_SUBST(SO_SUFFIX)
+ AC_SUBST(SO_SUFFIX_MODULE)
+ AC_SUBST(DLLIMP_SUFFIX)
+ AC_SUBST(EXEEXT)
+ AC_SUBST(LIBPREFIX)
+ AC_SUBST(LIBEXT)
+ AC_SUBST(DLLPREFIX)
+ AC_SUBST(DLLPREFIX_MODULE)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_SHARED_LD
+dnl
+dnl Detects command for making shared libraries, substitutes SHARED_LD_CC
+dnl and SHARED_LD_CXX.
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_SHARED_LD,
+[
+ dnl Defaults for GCC and ELF .so shared libs:
+ SHARED_LD_CC="\$(CC) -shared -o"
+ SHARED_LD_CXX="\$(CXX) -shared -o"
+
+ dnl the extra compiler flags needed for compilation of shared library
+ if test "x$GCC" = "xyes"; then
+ dnl the switch for gcc is the same under all platforms
+ PIC_FLAG="-fPIC"
+ fi
+
+ case "${BAKEFILE_HOST}" in
+ *-hp-hpux* )
+ dnl default settings are good for gcc but not for the native HP-UX
+ if test "x$GCC" = "xyes"; then
+ dnl -o flag must be after PIC flag
+ SHARED_LD_CC="${CC} -shared ${PIC_FLAG} -o"
+ SHARED_LD_CXX="${CXX} -shared ${PIC_FLAG} -o"
+ else
+ dnl no idea why it wants it, but it does
+ LDFLAGS="$LDFLAGS -L/usr/lib"
+
+ SHARED_LD_CC="${CC} -b -o"
+ SHARED_LD_CXX="${CXX} -b -o"
+ PIC_FLAG="+Z"
+ fi
+ ;;
+
+ *-*-linux* )
+ if test "x$GCC" != "xyes"; then
+ AC_CACHE_CHECK([for Intel compiler], bakefile_cv_prog_icc,
+ [
+ AC_TRY_COMPILE([],
+ [
+ #ifndef __INTEL_COMPILER
+ #error Not icc
+ #endif
+ ],
+ bakefile_cv_prog_icc=yes,
+ bakefile_cv_prog_icc=no
+ )
+ ])
+ if test "$bakefile_cv_prog_icc" = "yes"; then
+ PIC_FLAG="-KPIC"
+ fi
+ fi
+ ;;
+
+ *-*-solaris2* )
+ if test "x$GCC" != xyes ; then
+ SHARED_LD_CC="${CC} -G -o"
+ SHARED_LD_CXX="${CXX} -G -o"
+ PIC_FLAG="-KPIC"
+ fi
+ ;;
+
+ *-*-darwin* )
+ dnl Most apps benefit from being fully binded (its faster and static
+ dnl variables initialized at startup work).
+ dnl This can be done either with the exe linker flag -Wl,-bind_at_load
+ dnl or with a double stage link in order to create a single module
+ dnl "-init _wxWindowsDylibInit" not useful with lazy linking solved
+
+ dnl If using newer dev tools then there is a -single_module flag that
+ dnl we can use to do this, otherwise we'll need to use a helper
+ dnl script. Check the version of gcc to see which way we can go:
+ AC_CACHE_CHECK([for gcc 3.1 or later], wx_cv_gcc31, [
+ AC_TRY_COMPILE([],
+ [
+ #if (__GNUC__ < 3) || \
+ ((__GNUC__ == 3) && (__GNUC_MINOR__ < 1))
+ #error old gcc
+ #endif
+ ],
+ [
+ wx_cv_gcc31=yes
+ ],
+ [
+ wx_cv_gcc31=no
+ ]
+ )
+ ])
+ if test "$wx_cv_gcc31" = "no"; then
+ AC_BAKEFILE_CREATE_FILE_SHARED_LD_SH
+ chmod +x shared-ld-sh
+
+ dnl Use the shared-ld-sh helper script
+ SHARED_LD_CC="`pwd`/shared-ld-sh -dynamiclib -headerpad_max_install_names -o"
+ SHARED_LD_MODULE_CC="`pwd`/shared-ld-sh -bundle -headerpad_max_install_names -o"
+ SHARED_LD_CXX="$SHARED_LD_CC"
+ SHARED_LD_MODULE_CXX="$SHARED_LD_MODULE_CC"
+ else
+ dnl Use the -single_module flag and let the linker do it for us
+ SHARED_LD_CC="\${CC} -dynamiclib -single_module -headerpad_max_install_names -o"
+ SHARED_LD_MODULE_CC="\${CC} -bundle -single_module -headerpad_max_install_names -o"
+ SHARED_LD_CXX="\${CXX} -dynamiclib -single_module -headerpad_max_install_names -o"
+ SHARED_LD_MODULE_CXX="\${CXX} -bundle -single_module -headerpad_max_install_names -o"
+ fi
+
+ PIC_FLAG="-dynamic -fPIC"
+ ;;
+
+ *-*-aix* )
+ dnl default settings are ok for gcc
+ if test "x$GCC" != "xyes"; then
+ dnl the abs path below used to be hardcoded here so I guess it must
+ dnl be some sort of standard location under AIX?
+ AC_CHECK_PROG(AIX_CXX_LD, makeC++SharedLib,
+ makeC++SharedLib, /usr/lpp/xlC/bin/makeC++SharedLib)
+ dnl FIXME - what about makeCSharedLib?
+ SHARED_LD_CC="$AIX_CC_LD -p 0 -o"
+ SHARED_LD_CXX="$AIX_CXX_LD -p 0 -o"
+ fi
+ ;;
+
+ *-*-beos* )
+ dnl can't use gcc under BeOS for shared library creation because it
+ dnl complains about missing 'main'
+ SHARED_LD_CC="${LD} -shared -o"
+ SHARED_LD_CXX="${LD} -shared -o"
+ ;;
+
+ *-*-irix* )
+ dnl default settings are ok for gcc
+ if test "x$GCC" != "xyes"; then
+ PIC_FLAG="-KPIC"
+ fi
+ ;;
+
+ *-*-cygwin* | *-*-mingw32* )
+ PIC_FLAG=""
+ ;;
+
+ *-pc-os2_emx | *-pc-os2-emx )
+ SHARED_LD_CC="`pwd`/dllar.sh -o"
+ SHARED_LD_CXX="`pwd`/dllar.sh -o"
+ PIC_FLAG=""
+ AC_BAKEFILE_CREATE_FILE_DLLAR_SH
+ chmod +x dllar.sh
+ ;;
+
+ *-*-freebsd* | *-*-openbsd* | *-*-netbsd* | \
+ *-*-sunos4* | \
+ *-*-osf* | \
+ *-*-dgux5* | \
+ *-*-sysv5* )
+ dnl defaults are ok
+ ;;
+
+ *)
+ AC_MSG_ERROR(unknown system type $BAKEFILE_HOST.)
+ esac
+
+ if test "x$SHARED_LD_MODULE_CC" = "x" ; then
+ SHARED_LD_MODULE_CC="$SHARED_LD_CC"
+ fi
+ if test "x$SHARED_LD_MODULE_CXX" = "x" ; then
+ SHARED_LD_MODULE_CXX="$SHARED_LD_CXX"
+ fi
+
+ AC_SUBST(SHARED_LD_CC)
+ AC_SUBST(SHARED_LD_CXX)
+ AC_SUBST(SHARED_LD_MODULE_CC)
+ AC_SUBST(SHARED_LD_MODULE_CXX)
+ AC_SUBST(PIC_FLAG)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_SHARED_VERSIONS
+dnl
+dnl Detects linker options for attaching versions (sonames) to shared libs.
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_SHARED_VERSIONS,
+[
+ USE_SOVERSION=0
+ USE_SOVERLINUX=0
+ USE_SOVERSOLARIS=0
+ USE_SOSYMLINKS=0
+ USE_MACVERSION=0
+ SONAME_FLAG=
+
+ case "${BAKEFILE_HOST}" in
+ *-*-linux* )
+ SONAME_FLAG="-Wl,-soname,"
+ USE_SOVERSION=1
+ USE_SOVERLINUX=1
+ USE_SOSYMLINKS=1
+ ;;
+
+ *-*-solaris2* )
+ SONAME_FLAG="-h "
+ USE_SOVERSION=1
+ USE_SOVERSOLARIS=1
+ USE_SOSYMLINKS=1
+ ;;
+
+ *-*-darwin* )
+ USE_MACVERSION=1
+ USE_SOVERSION=1
+ USE_SOSYMLINKS=1
+ ;;
+ esac
+
+ AC_SUBST(USE_SOVERSION)
+ AC_SUBST(USE_SOVERLINUX)
+ AC_SUBST(USE_SOVERSOLARIS)
+ AC_SUBST(USE_MACVERSION)
+ AC_SUBST(USE_SOSYMLINKS)
+ AC_SUBST(SONAME_FLAG)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_DEPS
+dnl
+dnl Detects available C/C++ dependency tracking options
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_DEPS,
+[
+ AC_MSG_CHECKING([for dependency tracking method])
+ DEPS_TRACKING=0
+
+ if test "x$GCC" = "xyes"; then
+ DEPSMODE=gcc
+ DEPS_TRACKING=1
+ case "${BAKEFILE_HOST}" in
+ powerpc-*-darwin* )
+ dnl -cpp-precomp (the default) conflicts with -MMD option
+ dnl used by bk-deps (see also http://developer.apple.com/documentation/Darwin/Conceptual/PortingUnix/compiling/chapter_4_section_3.html)
+ DEPSFLAG_GCC="-no-cpp-precomp -MMD"
+ ;;
+ * )
+ DEPSFLAG_GCC="-MMD"
+ ;;
+ esac
+ AC_MSG_RESULT([gcc])
+ else
+ AC_MSG_RESULT([none])
+ fi
+
+ if test $DEPS_TRACKING = 1 ; then
+ AC_BAKEFILE_CREATE_FILE_BK_DEPS
+ chmod +x bk-deps
+ fi
+
+ AC_SUBST(DEPS_TRACKING)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_CHECK_BASIC_STUFF
+dnl
+dnl Checks for presence of basic programs, such as C and C++ compiler, "ranlib"
+dnl or "install"
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_CHECK_BASIC_STUFF,
+[
+ AC_PROG_RANLIB
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
+
+ AC_PROG_MAKE_SET
+ AC_SUBST(MAKE_SET)
+
+ AC_CHECK_TOOL(AR, ar, ar)
+ AC_CHECK_TOOL(STRIP, strip, :)
+ AC_CHECK_TOOL(NM, nm, :)
+
+ case ${BAKEFILE_HOST} in
+ *-hp-hpux* )
+ INSTALL_DIR="mkdir"
+ ;;
+ *) INSTALL_DIR="$INSTALL -d"
+ ;;
+ esac
+ AC_SUBST(INSTALL_DIR)
+
+ LDFLAGS_GUI=
+ case ${BAKEFILE_HOST} in
+ *-*-cygwin* | *-*-mingw32* )
+ LDFLAGS_GUI="-mwindows"
+ esac
+ AC_SUBST(LDFLAGS_GUI)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_RES_COMPILERS
+dnl
+dnl Checks for presence of resource compilers for win32 or mac
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_RES_COMPILERS,
+[
+ RESCOMP=
+ SETFILE=
+
+ case ${BAKEFILE_HOST} in
+ *-*-cygwin* | *-*-mingw32* )
+ dnl Check for win32 resources compiler:
+ if test "$build" != "$host" ; then
+ RESCOMP=$host_alias-windres
+ else
+ AC_CHECK_PROG(RESCOMP, windres, windres, windres)
+ fi
+ ;;
+
+ *-*-darwin* )
+ AC_CHECK_PROG(RESCOMP, Rez, Rez, /Developer/Tools/Rez)
+ AC_CHECK_PROG(SETFILE, SetFile, SetFile, /Developer/Tools/SetFile)
+ ;;
+ esac
+
+ AC_SUBST(RESCOMP)
+ AC_SUBST(SETFILE)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE_PRECOMP_HEADERS
+dnl
+dnl Check for precompiled headers support (GCC >= 3.4)
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_PRECOMP_HEADERS,
+[
+
+ AC_ARG_ENABLE([precomp-headers],
+ [ --disable-precomp-headers don't use precompiled headers even if compiler can],
+ [bk_use_pch="$enableval"])
+
+ GCC_PCH=0
+
+ if test "x$bk_use_pch" = "x" -o "x$bk_use_pch" = "xyes" ; then
+ if test "x$GCC" = "xyes"; then
+ dnl test if we have gcc-3.4:
+ AC_MSG_CHECKING([if the compiler supports precompiled headers])
+ AC_TRY_COMPILE([],
+ [
+ #if !defined(__GNUC__) || !defined(__GNUC_MINOR__)
+ #error "no pch support"
+ #endif
+ #if (__GNUC__ < 3)
+ #error "no pch support"
+ #endif
+ #if (__GNUC__ == 3) && \
+ ((!defined(__APPLE_CC__) && (__GNUC_MINOR__ < 4)) || \
+ ( defined(__APPLE_CC__) && (__GNUC_MINOR__ < 3)))
+ #error "no pch support"
+ #endif
+ ],
+ [
+ AC_MSG_RESULT([yes])
+ dnl FIXME - this is temporary, till .gch dependencies
+ dnl are fixed in generated Makefiles
+ CPPFLAGS="-fpch-deps $CPPFLAGS"
+ GCC_PCH=1
+ ],
+ [
+ AC_MSG_RESULT([no])
+ ])
+ if test $GCC_PCH = 1 ; then
+ cat <<EOF >bk-make-pch
+#!/bin/sh
+
+# This script is part of Bakefile (http://bakefile.sourceforge.net) autoconf
+# script. It is used to generated precompiled headers.
+#
+# Permission is given to use this file in any way.
+
+outfile="\${1}"
+header="\${2}"
+shift
+shift
+
+compiler=
+headerfile=
+while test \${#} -gt 0; do
+ case "\${1}" in
+ -I* )
+ incdir=\`echo \${1} | sed -e 's/-I\(.*\)/\1/g'\`
+ if test "x\${headerfile}" = "x" -a -f "\${incdir}/\${header}" ; then
+ headerfile="\${incdir}/\${header}"
+ fi
+ ;;
+ esac
+ compiler="\${compiler} \${1}"
+ shift
+done
+
+if test "x\${headerfile}" = "x" ; then
+ echo "error: can't find header \${header} in include paths" >2
+else
+ if test -f \${outfile} ; then
+ rm -f \${outfile}
+ else
+ mkdir -p \`dirname \${outfile}\`
+ fi
+ depsfile=".deps/\`basename \${outfile}\`.d"
+ mkdir -p .deps
+ # can do this because gcc is >= 3.4:
+ \${compiler} -o \${outfile} -MMD -MF "\${depsfile}" "\${headerfile}"
+ exit \${?}
+fi
+EOF
+ chmod +x bk-make-pch
+ fi
+ fi
+ fi
+
+ AC_SUBST(GCC_PCH)
+])
+
+
+
+dnl ---------------------------------------------------------------------------
+dnl AC_BAKEFILE
+dnl
+dnl To be used in configure.in of any project using Bakefile-generated mks
+dnl
+dnl Behaviour can be modified by setting following variables:
+dnl BAKEFILE_CHECK_BASICS set to "no" if you don't want bakefile to
+dnl to perform check for basic tools like ranlib
+dnl BAKEFILE_HOST set this to override host detection, defaults
+dnl to ${host}
+dnl BAKEFILE_FORCE_PLATFORM set to override platform detection
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE,
+[
+ if test "x$BAKEFILE_HOST" = "x"; then
+ BAKEFILE_HOST="${host}"
+ fi
+
+ if test "x$BAKEFILE_CHECK_BASICS" != "xno"; then
+ AC_BAKEFILE_CHECK_BASIC_STUFF
+ fi
+ AC_BAKEFILE_GNUMAKE
+ AC_BAKEFILE_PLATFORM
+ AC_BAKEFILE_PLATFORM_SPECIFICS
+ AC_BAKEFILE_SUFFIXES
+ AC_BAKEFILE_SHARED_LD
+ AC_BAKEFILE_SHARED_VERSIONS
+ AC_BAKEFILE_DEPS
+ AC_BAKEFILE_RES_COMPILERS
+
+ builtin(include, autoconf_inc.m4)
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl Embedded copies of helper scripts follow:
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN(AC_BAKEFILE_CREATE_FILE_DLLAR_SH,
+[
+dnl ===================== dllar.sh begins here =====================
+D='$'
+cat <<EOF >dllar.sh
+#!/bin/sh
+#
+# dllar - a tool to build both a .dll and an .a file
+# from a set of object (.o) files for EMX/OS2.
+#
+# Written by Andrew Zabolotny, bit@freya.etu.ru
+# Ported to Unix like shell by Stefan Neis, Stefan.Neis@t-online.de
+#
+# This script will accept a set of files on the command line.
+# All the public symbols from the .o files will be exported into
+# a .DEF file, then linker will be run (through gcc) against them to
+# build a shared library consisting of all given .o files. All libraries
+# (.a) will be first decompressed into component .o files then act as
+# described above. You can optionally give a description (-d "description")
+# which will be put into .DLL. To see the list of accepted options (as well
+# as command-line format) simply run this program without options. The .DLL
+# is built to be imported by name (there is no guarantee that new versions
+# of the library you build will have same ordinals for same symbols).
+#
+# dllar is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# dllar is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with dllar; see the file COPYING. If not, write to the Free
+# Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# To successfuly run this program you will need:
+# - Current drive should have LFN support (HPFS, ext2, network, etc)
+# (Sometimes dllar generates filenames which won't fit 8.3 scheme)
+# - gcc
+# (used to build the .dll)
+# - emxexp
+# (used to create .def file from .o files)
+# - emximp
+# (used to create .a file from .def file)
+# - GNU text utilites (cat, sort, uniq)
+# used to process emxexp output
+# - GNU file utilities (mv, rm)
+# - GNU sed
+# - lxlite (optional, see flag below)
+# (used for general .dll cleanup)
+#
+
+flag_USE_LXLITE=1;
+
+#
+# helper functions
+# basnam, variant of basename, which does _not_ remove the path, _iff_
+# second argument (suffix to remove) is given
+basnam(){
+ case ${D}# in
+ 1)
+ echo ${D}1 | sed 's/.*\///' | sed 's/.*\\//'
+ ;;
+ 2)
+ echo ${D}1 | sed 's/'${D}2'${D}//'
+ ;;
+ *)
+ echo "error in basnam ${D}*"
+ exit 8
+ ;;
+ esac
+}
+
+# Cleanup temporary files and output
+CleanUp() {
+ cd ${D}curDir
+ for i in ${D}inputFiles ; do
+ case ${D}i in
+ *!)
+ rm -rf \`basnam ${D}i !\`
+ ;;
+ *)
+ ;;
+ esac
+ done
+
+ # Kill result in case of failure as there is just to many stupid make/nmake
+ # things out there which doesn't do this.
+ if [ ${D}# -eq 0 ]; then
+ rm -f ${D}arcFile ${D}arcFile2 ${D}defFile ${D}dllFile
+ fi
+}
+
+# Print usage and exit script with rc=1.
+PrintHelp() {
+ echo 'Usage: dllar [-o[utput] output_file] [-i[mport] importlib_name]'
+ echo ' [-d[escription] "dll descrption"] [-cc "CC"] [-f[lags] "CFLAGS"]'
+ echo ' [-ord[inals]] -ex[clude] "symbol(s)"'
+ echo ' [-libf[lags] "{INIT|TERM}{GLOBAL|INSTANCE}"] [-nocrt[dll]] [-nolxl[ite]]'
+ echo ' [*.o] [*.a]'
+ echo '*> "output_file" should have no extension.'
+ echo ' If it has the .o, .a or .dll extension, it is automatically removed.'
+ echo ' The import library name is derived from this and is set to "name".a,'
+ echo ' unless overridden by -import'
+ echo '*> "importlib_name" should have no extension.'
+ echo ' If it has the .o, or .a extension, it is automatically removed.'
+ echo ' This name is used as the import library name and may be longer and'
+ echo ' more descriptive than the DLL name which has to follow the old '
+ echo ' 8.3 convention of FAT.'
+ echo '*> "cc" is used to use another GCC executable. (default: gcc.exe)'
+ echo '*> "flags" should be any set of valid GCC flags. (default: -s -Zcrtdll)'
+ echo ' These flags will be put at the start of GCC command line.'
+ echo '*> -ord[inals] tells dllar to export entries by ordinals. Be careful.'
+ echo '*> -ex[clude] defines symbols which will not be exported. You can define'
+ echo ' multiple symbols, for example -ex "myfunc yourfunc _GLOBAL*".'
+ echo ' If the last character of a symbol is "*", all symbols beginning'
+ echo ' with the prefix before "*" will be exclude, (see _GLOBAL* above).'
+ echo '*> -libf[lags] can be used to add INITGLOBAL/INITINSTANCE and/or'
+ echo ' TERMGLOBAL/TERMINSTANCE flags to the dynamically-linked library.'
+ echo '*> -nocrt[dll] switch will disable linking the library against emx''s'
+ echo ' C runtime DLLs.'
+ echo '*> -nolxl[ite] switch will disable running lxlite on the resulting DLL.'
+ echo '*> All other switches (for example -L./ or -lmylib) will be passed'
+ echo ' unchanged to GCC at the end of command line.'
+ echo '*> If you create a DLL from a library and you do not specify -o,'
+ echo ' the basename for DLL and import library will be set to library name,'
+ echo ' the initial library will be renamed to 'name'_s.a (_s for static)'
+ echo ' i.e. "dllar gcc.a" will create gcc.dll and gcc.a, and the initial'
+ echo ' library will be renamed into gcc_s.a.'
+ echo '--------'
+ echo 'Example:'
+ echo ' dllar -o gcc290.dll libgcc.a -d "GNU C runtime library" -ord'
+ echo ' -ex "__main __ctordtor*" -libf "INITINSTANCE TERMINSTANCE"'
+ CleanUp
+ exit 1
+}
+
+# Execute a command.
+# If exit code of the commnad <> 0 CleanUp() is called and we'll exit the script.
+# @Uses Whatever CleanUp() uses.
+doCommand() {
+ echo "${D}*"
+ eval ${D}*
+ rcCmd=${D}?
+
+ if [ ${D}rcCmd -ne 0 ]; then
+ echo "command failed, exit code="${D}rcCmd
+ CleanUp
+ exit ${D}rcCmd
+ fi
+}
+
+# main routine
+# setup globals
+cmdLine=${D}*
+outFile=""
+outimpFile=""
+inputFiles=""
+description=""
+CC=gcc.exe
+CFLAGS="-s -Zcrtdll"
+EXTRA_CFLAGS=""
+EXPORT_BY_ORDINALS=0
+exclude_symbols=""
+library_flags=""
+curDir=\`pwd\`
+curDirS=curDir
+case ${D}curDirS in
+*/)
+ ;;
+*)
+ curDirS=${D}{curDirS}"/"
+ ;;
+esac
+# Parse commandline
+libsToLink=0
+while [ ${D}1 ]; do
+ case ${D}1 in
+ -ord*)
+ EXPORT_BY_ORDINALS=1;
+ ;;
+ -o*)
+ shift
+ outFile=${D}1
+ ;;
+ -i*)
+ shift
+ outimpFile=${D}1
+ ;;
+ -d*)
+ shift
+ description=${D}1
+ ;;
+ -f*)
+ shift
+ CFLAGS=${D}1
+ ;;
+ -c*)
+ shift
+ CC=${D}1
+ ;;
+ -h*)
+ PrintHelp
+ ;;
+ -ex*)
+ shift
+ exclude_symbols=${D}{exclude_symbols}${D}1" "
+ ;;
+ -libf*)
+ shift
+ library_flags=${D}{library_flags}${D}1" "
+ ;;
+ -nocrt*)
+ CFLAGS="-s"
+ ;;
+ -nolxl*)
+ flag_USE_LXLITE=0
+ ;;
+ -* | /*)
+ case ${D}1 in
+ -L* | -l*)
+ libsToLink=1
+ ;;
+ *)
+ ;;
+ esac
+ EXTRA_CFLAGS=${D}{EXTRA_CFLAGS}" "${D}1
+ ;;
+ *)
+ found=0;
+ if [ ${D}libsToLink -ne 0 ]; then
+ EXTRA_CFLAGS=${D}{EXTRA_CFLAGS}" "${D}1
+ else
+ for file in ${D}1 ; do
+ if [ -f ${D}file ]; then
+ inputFiles="${D}{inputFiles} ${D}file"
+ found=1
+ fi
+ done
+ if [ ${D}found -eq 0 ]; then
+ echo "ERROR: No file(s) found: "${D}1
+ exit 8
+ fi
+ fi
+ ;;
+ esac
+ shift
+done # iterate cmdline words
+
+#
+if [ -z "${D}inputFiles" ]; then
+ echo "dllar: no input files"
+ PrintHelp
+fi
+
+# Now extract all .o files from .a files
+newInputFiles=""
+for file in ${D}inputFiles ; do
+ case ${D}file in
+ *.a | *.lib)
+ case ${D}file in
+ *.a)
+ suffix=".a"
+ AR="ar"
+ ;;
+ *.lib)
+ suffix=".lib"
+ AR="emxomfar"
+ EXTRA_CFLAGS="${D}EXTRA_CFLAGS -Zomf"
+ ;;
+ *)
+ ;;
+ esac
+ dirname=\`basnam ${D}file ${D}suffix\`"_%"
+ mkdir ${D}dirname
+ if [ ${D}? -ne 0 ]; then
+ echo "Failed to create subdirectory ./${D}dirname"
+ CleanUp
+ exit 8;
+ fi
+ # Append '!' to indicate archive
+ newInputFiles="${D}newInputFiles ${D}{dirname}!"
+ doCommand "cd ${D}dirname; ${D}AR x ../${D}file"
+ cd ${D}curDir
+ found=0;
+ for subfile in ${D}dirname/*.o* ; do
+ if [ -f ${D}subfile ]; then
+ found=1
+ if [ -s ${D}subfile ]; then
+ # FIXME: This should be: is file size > 32 byte, _not_ > 0!
+ newInputFiles="${D}newInputFiles ${D}subfile"
+ fi
+ fi
+ done
+ if [ ${D}found -eq 0 ]; then
+ echo "WARNING: there are no files in archive \'${D}file\'"
+ fi
+ ;;
+ *)
+ newInputFiles="${D}{newInputFiles} ${D}file"
+ ;;
+ esac
+done
+inputFiles="${D}newInputFiles"
+
+# Output filename(s).
+do_backup=0;
+if [ -z ${D}outFile ]; then
+ do_backup=1;
+ set outFile ${D}inputFiles; outFile=${D}2
+fi
+
+# If it is an archive, remove the '!' and the '_%' suffixes
+case ${D}outFile in
+*_%!)
+ outFile=\`basnam ${D}outFile _%!\`
+ ;;
+*)
+ ;;
+esac
+case ${D}outFile in
+*.dll)
+ outFile=\`basnam ${D}outFile .dll\`
+ ;;
+*.DLL)
+ outFile=\`basnam ${D}outFile .DLL\`
+ ;;
+*.o)
+ outFile=\`basnam ${D}outFile .o\`
+ ;;
+*.obj)
+ outFile=\`basnam ${D}outFile .obj\`
+ ;;
+*.a)
+ outFile=\`basnam ${D}outFile .a\`
+ ;;
+*.lib)
+ outFile=\`basnam ${D}outFile .lib\`
+ ;;
+*)
+ ;;
+esac
+case ${D}outimpFile in
+*.a)
+ outimpFile=\`basnam ${D}outimpFile .a\`
+ ;;
+*.lib)
+ outimpFile=\`basnam ${D}outimpFile .lib\`
+ ;;
+*)
+ ;;
+esac
+if [ -z ${D}outimpFile ]; then
+ outimpFile=${D}outFile
+fi
+defFile="${D}{outFile}.def"
+arcFile="${D}{outimpFile}.a"
+arcFile2="${D}{outimpFile}.lib"
+dllFile="${D}outFile"
+# Add suffix to dllFile later, first we need a version to use as
+# name in .def file.
+
+if [ ${D}do_backup -ne 0 ] ; then
+ if [ -f ${D}arcFile ] ; then
+ doCommand "mv ${D}arcFile ${D}{outFile}_s.a"
+ fi
+ if [ -f ${D}arcFile2 ] ; then
+ doCommand "mv ${D}arcFile2 ${D}{outFile}_s.lib"
+ fi
+fi
+
+# Extract public symbols from all the object files.
+tmpdefFile=${D}{defFile}_%
+rm -f ${D}tmpdefFile
+for file in ${D}inputFiles ; do
+ case ${D}file in
+ *!)
+ ;;
+ *)
+ doCommand "emxexp -u ${D}file >> ${D}tmpdefFile"
+ ;;
+ esac
+done
+
+# Create the def file.
+rm -f ${D}defFile
+echo "LIBRARY \`basnam ${D}dllFile\` ${D}library_flags" >> ${D}defFile
+dllFile="${D}dllFile.dll"
+if [ -n ${D}description ]; then
+ echo "DESCRIPTION \"${D}{description}\"" >> ${D}defFile
+fi
+echo "EXPORTS" >> ${D}defFile
+
+doCommand "cat ${D}tmpdefFile | sort.exe | uniq.exe > ${D}{tmpdefFile}%"
+grep -v "^ *;" < ${D}{tmpdefFile}% | grep -v "^ *${D}" >${D}tmpdefFile
+
+# Checks if the export is ok or not.
+for word in ${D}exclude_symbols; do
+ grep -v ${D}word < ${D}tmpdefFile >${D}{tmpdefFile}%
+ mv ${D}{tmpdefFile}% ${D}tmpdefFile
+done
+
+
+if [ ${D}EXPORT_BY_ORDINALS -ne 0 ]; then
+ sed "=" < ${D}tmpdefFile | \
+ sed '
+ N
+ : loop
+ s/^\([0-9]\+\)\([^;]*\)\(;.*\)\?/\2 @\1 NONAME/
+ t loop
+ ' > ${D}{tmpdefFile}%
+ grep -v "^ *${D}" < ${D}{tmpdefFile}% > ${D}tmpdefFile
+else
+ rm -f ${D}{tmpdefFile}%
+fi
+cat ${D}tmpdefFile >> ${D}defFile
+rm -f ${D}tmpdefFile
+
+# Do linking, create implib, and apply lxlite.
+gccCmdl="";
+for file in ${D}inputFiles ; do
+ case ${D}file in
+ *!)
+ ;;
+ *)
+ gccCmdl="${D}gccCmdl ${D}file"
+ ;;
+ esac
+done
+doCommand "${D}CC ${D}CFLAGS -Zdll -o ${D}dllFile ${D}defFile ${D}gccCmdl ${D}EXTRA_CFLAGS"
+touch "${D}{outFile}.dll"
+
+doCommand "emximp -o ${D}arcFile ${D}defFile"
+if [ ${D}flag_USE_LXLITE -ne 0 ]; then
+ add_flags="";
+ if [ ${D}EXPORT_BY_ORDINALS -ne 0 ]; then
+ add_flags="-ynd"
+ fi
+ doCommand "lxlite -cs -t: -mrn -mln ${D}add_flags ${D}dllFile"
+fi
+doCommand "emxomf -s -l ${D}arcFile"
+
+# Successful exit.
+CleanUp 1
+exit 0
+EOF
+dnl ===================== dllar.sh ends here =====================
+])
+
+AC_DEFUN(AC_BAKEFILE_CREATE_FILE_BK_DEPS,
+[
+dnl ===================== bk-deps begins here =====================
+D='$'
+cat <<EOF >bk-deps
+#!/bin/sh
+
+# This script is part of Bakefile (http://bakefile.sourceforge.net) autoconf
+# script. It is used to track C/C++ files dependencies in portable way.
+#
+# Permission is given to use this file in any way.
+
+DEPSMODE=${DEPSMODE}
+DEPSDIR=.deps
+DEPSFLAG_GCC="${DEPSFLAG_GCC}"
+
+mkdir -p ${D}DEPSDIR
+
+if test ${D}DEPSMODE = gcc ; then
+ ${D}* ${D}{DEPSFLAG_GCC}
+ status=${D}?
+ if test ${D}{status} != 0 ; then
+ exit ${D}{status}
+ fi
+ # move created file to the location we want it in:
+ while test ${D}# -gt 0; do
+ case "${D}1" in
+ -o )
+ shift
+ objfile=${D}1
+ ;;
+ -* )
+ ;;
+ * )
+ srcfile=${D}1
+ ;;
+ esac
+ shift
+ done
+ depfile=\`basename ${D}srcfile | sed -e 's/\..*${D}/.d/g'\`
+ depobjname=\`echo ${D}depfile |sed -e 's/\.d/.o/g'\`
+ if test -f ${D}depfile ; then
+ sed -e "s,${D}depobjname:,${D}objfile:,g" ${D}depfile >${D}{DEPSDIR}/${D}{objfile}.d
+ rm -f ${D}depfile
+ else
+ depfile=\`basename ${D}objfile | sed -e 's/\..*${D}/.d/g'\`
+ if test -f ${D}depfile ; then
+ sed -e "/^${D}objfile/!s,${D}depobjname:,${D}objfile:,g" ${D}depfile >${D}{DEPSDIR}/${D}{objfile}.d
+ rm -f ${D}depfile
+ fi
+ fi
+ exit 0
+else
+ ${D}*
+ exit ${D}?
+fi
+EOF
+dnl ===================== bk-deps ends here =====================
+])
+
+AC_DEFUN(AC_BAKEFILE_CREATE_FILE_SHARED_LD_SH,
+[
+dnl ===================== shared-ld-sh begins here =====================
+D='$'
+cat <<EOF >shared-ld-sh
+#!/bin/sh
+#-----------------------------------------------------------------------------
+#-- Name: distrib/mac/shared-ld-sh
+#-- Purpose: Link a mach-o dynamic shared library for Darwin / Mac OS X
+#-- Author: Gilles Depeyrot
+#-- Copyright: (c) 2002 Gilles Depeyrot
+#-- Licence: any use permitted
+#-----------------------------------------------------------------------------
+
+verbose=0
+args=""
+objects=""
+linking_flag="-dynamiclib"
+
+while test ${D}# -gt 0; do
+ case ${D}1 in
+
+ -v)
+ verbose=1
+ ;;
+
+ -o|-compatibility_version|-current_version|-framework|-undefined|-install_name)
+ # collect these options and values
+ args="${D}{args} ${D}1 ${D}2"
+ shift
+ ;;
+
+ -l*|-L*|-flat_namespace|-headerpad_max_install_names)
+ # collect these options
+ args="${D}{args} ${D}1"
+ ;;
+
+ -dynamiclib|-bundle)
+ linking_flag="${D}1"
+ ;;
+
+ -*)
+ echo "shared-ld: unhandled option '${D}1'"
+ exit 1
+ ;;
+
+ *.o | *.a | *.dylib)
+ # collect object files
+ objects="${D}{objects} ${D}1"
+ ;;
+
+ *)
+ echo "shared-ld: unhandled argument '${D}1'"
+ exit 1
+ ;;
+
+ esac
+ shift
+done
+
+#
+# Link one module containing all the others
+#
+if test ${D}{verbose} = 1; then
+ echo "c++ -r -keep_private_externs -nostdlib ${D}{objects} -o master.${D}${D}.o"
+fi
+c++ -r -keep_private_externs -nostdlib ${D}{objects} -o master.${D}${D}.o
+status=${D}?
+if test ${D}{status} != 0; then
+ exit ${D}{status}
+fi
+
+#
+# Link the shared library from the single module created
+#
+if test ${D}{verbose} = 1; then
+ echo "cc ${D}{linking_flag} master.${D}${D}.o ${D}{args}"
+fi
+c++ ${D}{linking_flag} master.${D}${D}.o ${D}{args}
+status=${D}?
+if test ${D}{status} != 0; then
+ exit ${D}{status}
+fi
+
+#
+# Remove intermediate module
+#
+rm -f master.${D}${D}.o
+
+exit 0
+EOF
+dnl ===================== shared-ld-sh ends here =====================
+])
+
+dnl
+dnl AM_PATH_CPPUNIT([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl
+AC_DEFUN(AM_PATH_CPPUNIT,
+[
+
+AC_ARG_WITH(cppunit-prefix,[ --with-cppunit-prefix=PFX Prefix where CppUnit is installed (optional)],
+ cppunit_config_prefix="$withval", cppunit_config_prefix="")
+AC_ARG_WITH(cppunit-exec-prefix,[ --with-cppunit-exec-prefix=PFX Exec prefix where CppUnit is installed (optional)],
+ cppunit_config_exec_prefix="$withval", cppunit_config_exec_prefix="")
+
+ if test x$cppunit_config_exec_prefix != x ; then
+ cppunit_config_args="$cppunit_config_args --exec-prefix=$cppunit_config_exec_prefix"
+ if test x${CPPUNIT_CONFIG+set} != xset ; then
+ CPPUNIT_CONFIG=$cppunit_config_exec_prefix/bin/cppunit-config
+ fi
+ fi
+ if test x$cppunit_config_prefix != x ; then
+ cppunit_config_args="$cppunit_config_args --prefix=$cppunit_config_prefix"
+ if test x${CPPUNIT_CONFIG+set} != xset ; then
+ CPPUNIT_CONFIG=$cppunit_config_prefix/bin/cppunit-config
+ fi
+ fi
+
+ AC_PATH_PROG(CPPUNIT_CONFIG, cppunit-config, no)
+ cppunit_version_min=$1
+
+ AC_MSG_CHECKING(for Cppunit - version >= $cppunit_version_min)
+ no_cppunit=""
+ if test "$CPPUNIT_CONFIG" = "no" ; then
+ no_cppunit=yes
+ AC_MSG_RESULT(no)
+ else
+ CPPUNIT_CFLAGS=`$CPPUNIT_CONFIG --cflags`
+ CPPUNIT_LIBS=`$CPPUNIT_CONFIG --libs`
+ cppunit_version=`$CPPUNIT_CONFIG --version`
+
+ cppunit_major_version=`echo $cppunit_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ cppunit_minor_version=`echo $cppunit_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ cppunit_micro_version=`echo $cppunit_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+
+ cppunit_major_min=`echo $cppunit_version_min | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ cppunit_minor_min=`echo $cppunit_version_min | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ cppunit_micro_min=`echo $cppunit_version_min | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+
+ cppunit_version_proper=`expr \
+ $cppunit_major_version \> $cppunit_major_min \| \
+ $cppunit_major_version \= $cppunit_major_min \& \
+ $cppunit_minor_version \> $cppunit_minor_min \| \
+ $cppunit_major_version \= $cppunit_major_min \& \
+ $cppunit_minor_version \= $cppunit_minor_min \& \
+ $cppunit_micro_version \>= $cppunit_micro_min `
+
+ if test "$cppunit_version_proper" = "1" ; then
+ AC_MSG_RESULT([$cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version])
+ else
+ AC_MSG_RESULT(no)
+ no_cppunit=yes
+ fi
+ fi
+
+ if test "x$no_cppunit" = x ; then
+ ifelse([$2], , :, [$2])
+ else
+ CPPUNIT_CFLAGS=""
+ CPPUNIT_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+
+ AC_SUBST(CPPUNIT_CFLAGS)
+ AC_SUBST(CPPUNIT_LIBS)
+])
+
+
+
+
projects / wxWidgets.git / blobdiff