one more fix for tree selection

[wxWidgets.git] / docs / latex / wx / dc.tex

diff --git a/docs/latex/wx/dc.tex b/docs/latex/wx/dc.tex
index 7a2c520f96080a6c5f09e583a201d2ccc2dad9fc..8f75eac8f5db078ae12856efe0f6e9d193249039 100644 (file)
--- a/docs/latex/wx/dc.tex
+++ b/docs/latex/wx/dc.tex
@@ -30,18 +30,21 @@ them.
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxDC::wxDC}
+
+\membersection{wxDC::wxDC}\label{wxdcctor}

 
 \func{}{wxDC}{\void}
 
 Constructor.
 
 
 \func{}{wxDC}{\void}
 
 Constructor.
 

-\membersection{wxDC::\destruct{wxDC}}
+
+\membersection{wxDC::\destruct{wxDC}}\label{wxdcdtor}

 
 \func{}{\destruct{wxDC}}{\void}
 
 Destructor.
 
 
 \func{}{\destruct{wxDC}}{\void}
 
 Destructor.
 

+

 \membersection{wxDC::BeginDrawing}\label{wxdcbegindrawing}
 
 \func{void}{BeginDrawing}{\void}
 \membersection{wxDC::BeginDrawing}\label{wxdcbegindrawing}
 
 \func{void}{BeginDrawing}{\void}


@@ -57,6 +60,7 @@ a retained device context associated with it, and selections such as pen
 and brush settings would be lost if the device context were obtained and
 released for each drawing operation.
 
 and brush settings would be lost if the device context were obtained and
 released for each drawing operation.
 

+

 \membersection{wxDC::Blit}\label{wxdcblit}
 
 \func{bool}{Blit}{\param{wxCoord}{ xdest}, \param{wxCoord}{ ydest}, \param{wxCoord}{ width}, \param{wxCoord}{ height},
 \membersection{wxDC::Blit}\label{wxdcblit}
 
 \func{bool}{Blit}{\param{wxCoord}{ xdest}, \param{wxCoord}{ ydest}, \param{wxCoord}{ width}, \param{wxCoord}{ height},


@@ -105,7 +109,7 @@ This sequence of operations ensures that the source's transparent area need not
 and logical functions are supported.
 
 {\bf Note:} on Windows, blitting with masks can be speeded up considerably by compiling
 and logical functions are supported.
 
 {\bf Note:} on Windows, blitting with masks can be speeded up considerably by compiling

-wxWindows with the wxUSE\_DC\_CACHE option enabled. You can also influence whether MaskBlt
+wxWidgets with the wxUSE\_DC\_CACHE option enabled. You can also influence whether MaskBlt

 or the explicit mask blitting code above is used, by using \helpref{wxSystemOptions}{wxsystemoptions} and
 setting the {\bf no-maskblt} option to 1.
 
 or the explicit mask blitting code above is used, by using \helpref{wxSystemOptions}{wxsystemoptions} and
 setting the {\bf no-maskblt} option to 1.
 


@@ -129,6 +133,7 @@ See \helpref{wxMemoryDC}{wxmemorydc} for typical usage.
 \helpref{wxMemoryDC}{wxmemorydc}, \helpref{wxBitmap}{wxbitmap}, \helpref{wxMask}{wxmask}
 
 \begin{comment}
 \helpref{wxMemoryDC}{wxmemorydc}, \helpref{wxBitmap}{wxbitmap}, \helpref{wxMask}{wxmask}
 
 \begin{comment}

+

 \membersection{wxDC::CacheEnabled}\label{wxdccacheenabled}
 
 \func{static bool}{CacheEnabled}{\void}
 \membersection{wxDC::CacheEnabled}\label{wxdccacheenabled}
 
 \func{static bool}{CacheEnabled}{\void}


@@ -146,6 +151,7 @@ wxUSE\_DC\_CACHEING preprocessor symbol for portability.
 \helpref{wxDC::EnableCache}{wxdcenablecache}, \helpref{wxDC::ClearCache}
 \end{comment}
 
 \helpref{wxDC::EnableCache}{wxdcenablecache}, \helpref{wxDC::ClearCache}
 \end{comment}
 

+

 \membersection{wxDC::CalcBoundingBox}\label{wxdccalcboundingbox}
 
 \func{void}{CalcBoundingBox}{\param{wxCoord }{x}, \param{wxCoord }{y}}
 \membersection{wxDC::CalcBoundingBox}\label{wxdccalcboundingbox}
 
 \func{void}{CalcBoundingBox}{\param{wxCoord }{x}, \param{wxCoord }{y}}


@@ -158,6 +164,7 @@ Adds the specified point to the bounding box which can be retrieved with
 
 \helpref{ResetBoundingBox}{wxdcresetboundingbox}
 
 
 \helpref{ResetBoundingBox}{wxdcresetboundingbox}
 

+

 \membersection{wxDC::Clear}\label{wxdcclear}
 
 \func{void}{Clear}{\void}
 \membersection{wxDC::Clear}\label{wxdcclear}
 
 \func{void}{Clear}{\void}


@@ -165,6 +172,7 @@ Adds the specified point to the bounding box which can be retrieved with
 Clears the device context using the current background brush.
 
 \begin{comment}
 Clears the device context using the current background brush.
 
 \begin{comment}

+

 \membersection{wxDC::ClearCache}\label{wxdcclearcache}
 
 \func{static void}{ClearCache}{\void}
 \membersection{wxDC::ClearCache}\label{wxdcclearcache}
 
 \func{static void}{ClearCache}{\void}


@@ -184,6 +192,16 @@ wxUSE\_DC\_CACHEING preprocessor symbol for portability.
 \helpref{wxDC::EnableCache}{wxdcenablecache}, \helpref{wxDC::CacheEnabled}
 \end{comment}
 
 \helpref{wxDC::EnableCache}{wxdcenablecache}, \helpref{wxDC::CacheEnabled}
 \end{comment}
 

+
+\membersection{wxDC::ComputeScaleAndOrigin}\label{wxdccomputescaleandorigin}
+
+\func{virtual void}{ComputeScaleAndOrigin}{\void}
+
+Performs all necessary computations for given platform and context type
+after each change of scale and origin parameters. Usually called automatically 
+internally after such changes.
+
+

 \membersection{wxDC::CrossHair}\label{wxdccrosshair}
 
 \func{void}{CrossHair}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
 \membersection{wxDC::CrossHair}\label{wxdccrosshair}
 
 \func{void}{CrossHair}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}


@@ -192,6 +210,7 @@ Displays a cross hair using the current pen. This is a vertical
 and horizontal line the height and width of the window, centred
 on the given point.
 
 and horizontal line the height and width of the window, centred
 on the given point.
 

+

 \membersection{wxDC::DestroyClippingRegion}\label{wxdcdestroyclippingregion}
 
 \func{void}{DestroyClippingRegion}{\void}
 \membersection{wxDC::DestroyClippingRegion}\label{wxdcdestroyclippingregion}
 
 \func{void}{DestroyClippingRegion}{\void}


@@ -199,6 +218,7 @@ on the given point.
 Destroys the current clipping region so that none of the DC is clipped.
 See also \helpref{wxDC::SetClippingRegion}{wxdcsetclippingregion}.
 
 Destroys the current clipping region so that none of the DC is clipped.
 See also \helpref{wxDC::SetClippingRegion}{wxdcsetclippingregion}.
 

+

 \membersection{wxDC::DeviceToLogicalX}\label{wxdcdevicetologicalx}
 
 \func{wxCoord}{DeviceToLogicalX}{\param{wxCoord}{ x}}
 \membersection{wxDC::DeviceToLogicalX}\label{wxdcdevicetologicalx}
 
 \func{wxCoord}{DeviceToLogicalX}{\param{wxCoord}{ x}}


@@ -206,6 +226,7 @@ See also \helpref{wxDC::SetClippingRegion}{wxdcsetclippingregion}.
 Convert device X coordinate to logical coordinate, using the current
 mapping mode.
 
 Convert device X coordinate to logical coordinate, using the current
 mapping mode.
 

+

 \membersection{wxDC::DeviceToLogicalXRel}\label{wxdcdevicetologicalxrel}
 
 \func{wxCoord}{DeviceToLogicalXRel}{\param{wxCoord}{ x}}
 \membersection{wxDC::DeviceToLogicalXRel}\label{wxdcdevicetologicalxrel}
 
 \func{wxCoord}{DeviceToLogicalXRel}{\param{wxCoord}{ x}}


@@ -214,6 +235,7 @@ Convert device X coordinate to relative logical coordinate, using the current
 mapping mode but ignoring the x axis orientation.
 Use this function for converting a width, for example.
 
 mapping mode but ignoring the x axis orientation.
 Use this function for converting a width, for example.
 

+

 \membersection{wxDC::DeviceToLogicalY}\label{wxdcdevicetologicaly}
 
 \func{wxCoord}{DeviceToLogicalY}{\param{wxCoord}{ y}}
 \membersection{wxDC::DeviceToLogicalY}\label{wxdcdevicetologicaly}
 
 \func{wxCoord}{DeviceToLogicalY}{\param{wxCoord}{ y}}


@@ -221,6 +243,7 @@ Use this function for converting a width, for example.
 Converts device Y coordinate to logical coordinate, using the current
 mapping mode.
 
 Converts device Y coordinate to logical coordinate, using the current
 mapping mode.
 

+

 \membersection{wxDC::DeviceToLogicalYRel}\label{wxdcdevicetologicalyrel}
 
 \func{wxCoord}{DeviceToLogicalYRel}{\param{wxCoord}{ y}}
 \membersection{wxDC::DeviceToLogicalYRel}\label{wxdcdevicetologicalyrel}
 
 \func{wxCoord}{DeviceToLogicalYRel}{\param{wxCoord}{ y}}


@@ -229,9 +252,10 @@ Convert device Y coordinate to relative logical coordinate, using the current
 mapping mode but ignoring the y axis orientation.
 Use this function for converting a height, for example.
 
 mapping mode but ignoring the y axis orientation.
 Use this function for converting a height, for example.
 

+

 \membersection{wxDC::DrawArc}\label{wxdcdrawarc}
 
 \membersection{wxDC::DrawArc}\label{wxdcdrawarc}
 

-\func{void}{DrawArc}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}, \param{double}{ xc}, \param{double}{ yc}}
+\func{void}{DrawArc}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}, \param{wxCoord}{ xc}, \param{wxCoord}{ yc}}

 
 Draws an arc of a circle, centred on ({\it xc, yc}), with starting point ({\it x1, y1})
 and ending at ({\it x2, y2}).   The current pen is used for the outline
 
 Draws an arc of a circle, centred on ({\it xc, yc}), with starting point ({\it x1, y1})
 and ending at ({\it x2, y2}).   The current pen is used for the outline


@@ -239,6 +263,7 @@ and the current brush for filling the shape.
 
 The arc is drawn in an anticlockwise direction from the start point to the end point.
 
 
 The arc is drawn in an anticlockwise direction from the start point to the end point.
 

+

 \membersection{wxDC::DrawBitmap}\label{wxdcdrawbitmap}
 
 \func{void}{DrawBitmap}{\param{const wxBitmap\&}{ bitmap}, \param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{bool}{ transparent}}
 \membersection{wxDC::DrawBitmap}\label{wxdcdrawbitmap}
 
 \func{void}{DrawBitmap}{\param{const wxBitmap\&}{ bitmap}, \param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{bool}{ transparent}}


@@ -251,6 +276,7 @@ of the bitmap (all bits set to 1), and the current text background colour to dra
 (all bits set to 0). See also \helpref{SetTextForeground}{wxdcsettextforeground}, 
 \helpref{SetTextBackground}{wxdcsettextbackground} and \helpref{wxMemoryDC}{wxmemorydc}.
 
 (all bits set to 0). See also \helpref{SetTextForeground}{wxdcsettextforeground}, 
 \helpref{SetTextBackground}{wxdcsettextbackground} and \helpref{wxMemoryDC}{wxmemorydc}.
 

+

 \membersection{wxDC::DrawCheckMark}\label{wxdcdrawcheckmark}
 
 \func{void}{DrawCheckMark}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
 \membersection{wxDC::DrawCheckMark}\label{wxdcdrawcheckmark}
 
 \func{void}{DrawCheckMark}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}


@@ -259,6 +285,7 @@ of the bitmap (all bits set to 1), and the current text background colour to dra
 
 Draws a check mark inside the given rectangle.
 
 
 Draws a check mark inside the given rectangle.
 

+

 \membersection{wxDC::DrawCircle}\label{wxdcdrawcircle}
 
 \func{void}{DrawCircle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ radius}}
 \membersection{wxDC::DrawCircle}\label{wxdcdrawcircle}
 
 \func{void}{DrawCircle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ radius}}


@@ -271,6 +298,7 @@ Draws a circle with the given centre and radius.
 
 \helpref{DrawEllipse}{wxdcdrawellipse}
 
 
 \helpref{DrawEllipse}{wxdcdrawellipse}
 

+

 \membersection{wxDC::DrawEllipse}\label{wxdcdrawellipse}
 
 \func{void}{DrawEllipse}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
 \membersection{wxDC::DrawEllipse}\label{wxdcdrawellipse}
 
 \func{void}{DrawEllipse}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}


@@ -287,6 +315,7 @@ outline and the current brush for filling the shape.
 
 \helpref{DrawCircle}{wxdcdrawcircle}
 
 
 \helpref{DrawCircle}{wxdcdrawcircle}
 

+

 \membersection{wxDC::DrawEllipticArc}\label{wxdcdrawellipticarc}
 
 \func{void}{DrawEllipticArc}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height},
 \membersection{wxDC::DrawEllipticArc}\label{wxdcdrawellipticarc}
 
 \func{void}{DrawEllipticArc}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height},


@@ -307,6 +336,7 @@ in degrees (360 is a complete circle). Positive values mean
 counter-clockwise motion. If {\it start} is equal to {\it end}, a
 complete ellipse will be drawn.
 
 counter-clockwise motion. If {\it start} is equal to {\it end}, a
 complete ellipse will be drawn.
 

+

 \membersection{wxDC::DrawIcon}\label{wxdcdrawicon}
 
 \func{void}{DrawIcon}{\param{const wxIcon\&}{ icon}, \param{wxCoord}{ x}, \param{wxCoord}{ y}}
 \membersection{wxDC::DrawIcon}\label{wxdcdrawicon}
 
 \func{void}{DrawIcon}{\param{const wxIcon\&}{ icon}, \param{wxCoord}{ x}, \param{wxCoord}{ y}}


@@ -314,6 +344,25 @@ complete ellipse will be drawn.
 Draw an icon on the display (does nothing if the device context is PostScript).
 This can be the simplest way of drawing bitmaps on a window.
 
 Draw an icon on the display (does nothing if the device context is PostScript).
 This can be the simplest way of drawing bitmaps on a window.
 

+
+\membersection{wxDC::DrawLabel}\label{wxdcdrawlabel}
+
+\func{virtual void}{DrawLabel}{\param{const wxString\&}{ text},
+                               \param{const wxBitmap\&}{ image},
+                               \param{const wxRect\&}{ rect},
+                               \param{int}{ alignment = wxALIGN\_LEFT | wxALIGN\_TOP},
+                               \param{int}{ indexAccel = -1},
+                               \param{wxRect *}{rectBounding = NULL}}
+
+\func{void}{DrawLabel}{\param{const wxString\&}{ text}, \param{const wxRect\&}{ rect},
+                       \param{int}{ alignment = wxALIGN\_LEFT | wxALIGN\_TOP},
+                       \param{int}{ indexAccel = -1}}
+
+Draw optional bitmap and the text into the given rectangle and aligns it as specified
+by alignment parameter; it also will emphasize the character with the given index if
+it is != -1 and return the bounding rectangle if required.
+
+

 \membersection{wxDC::DrawLine}\label{wxdcdrawline}
 
 \func{void}{DrawLine}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}}
 \membersection{wxDC::DrawLine}\label{wxdcdrawline}
 
 \func{void}{DrawLine}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}}


@@ -323,6 +372,7 @@ for drawing the line. Note that the point $(x2, y2)$ is {\emph not} part of the
 line and is not drawn by this function (this is consistent with the behaviour
 of many other toolkits).
 
 line and is not drawn by this function (this is consistent with the behaviour
 of many other toolkits).
 

+

 \membersection{wxDC::DrawLines}\label{wxdcdrawlines}
 
 \func{void}{DrawLines}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0}}
 \membersection{wxDC::DrawLines}\label{wxdcdrawlines}
 
 \func{void}{DrawLines}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0}}


@@ -341,6 +391,7 @@ of wxPoint objects.}
   as its first parameter a reference to an array
   of wxPoint objects.}
 
   as its first parameter a reference to an array
   of wxPoint objects.}
 

+

 \membersection{wxDC::DrawPolygon}\label{wxdcdrawpolygon}
 
 \func{void}{DrawPolygon}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0},\\
 \membersection{wxDC::DrawPolygon}\label{wxdcdrawpolygon}
 
 \func{void}{DrawPolygon}{\param{int}{ n}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0},\\


@@ -359,7 +410,7 @@ The current pen is used for drawing the outline, and the current brush
 for filling the shape.  Using a transparent brush suppresses filling.
 The programmer is responsible for deleting the list of points.
 
 for filling the shape.  Using a transparent brush suppresses filling.
 The programmer is responsible for deleting the list of points.
 

-Note that wxWindows automatically closes the first and last points.
+Note that wxWidgets automatically closes the first and last points.

 
 \pythonnote{The wxPython version of this method accepts a Python list
 of wxPoint objects.}
 
 \pythonnote{The wxPython version of this method accepts a Python list
 of wxPoint objects.}


@@ -368,11 +419,45 @@ of wxPoint objects.}
   as its first parameter a reference to an array
   of wxPoint objects.}
 
   as its first parameter a reference to an array
   of wxPoint objects.}
 

+
+\membersection{wxDC::DrawPolyPolygon}\label{wxdcdrawpolypolygon}
+
+\func{void}{DrawPolyPolygon}{\param{int}{ n}, \param{int}{ count[]}, \param{wxPoint}{ points[]}, \param{wxCoord}{ xoffset = 0}, \param{wxCoord}{ yoffset = 0},\\
+  \param{int }{fill\_style = wxODDEVEN\_RULE}}
+
+Draws two or more filled polygons using an array of {\it points}, adding the
+optional offset coordinates.
+
+Notice that for the platforms providing a native implementation
+of this function (Windows and PostScript-based wxDC currently), this is more
+efficient than using \helpref{DrawPolygon}{wxdcdrawpolygon} in a loop.
+
+{\it n} specifies the number of polygons to draw, the array {\it count} of size 
+{\it n} specifies the number of points in each of the polygons in the 
+{\it points} array.
+
+The last argument specifies the fill rule: {\bf wxODDEVEN\_RULE} (the default)
+or {\bf wxWINDING\_RULE}.
+
+The current pen is used for drawing the outline, and the current brush for
+filling the shape.  Using a transparent brush suppresses filling.
+
+The polygons maybe disjoint or overlapping. Each polygon specified in a call to
+{\bf DrawPolyPolygon} must be closed. Unlike polygons created by the
+\helpref{DrawPolygon}{wxdcdrawpolygon} member function, the polygons created by
+{\bf DrawPolyPolygon} are not closed automatically.
+
+\pythonnote{Not implemented yet}
+
+\perlnote{Not implemented yet}
+
+

 \membersection{wxDC::DrawPoint}\label{wxdcdrawpoint}
 
 \func{void}{DrawPoint}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
 
 \membersection{wxDC::DrawPoint}\label{wxdcdrawpoint}
 
 \func{void}{DrawPoint}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
 

-Draws a point using the current pen.
+Draws a point using the color of the current pen. Note that the other properties of the pen are not used, such as width etc..
+

 
 \membersection{wxDC::DrawRectangle}\label{wxdcdrawrectangle}
 
 
 \membersection{wxDC::DrawRectangle}\label{wxdcdrawrectangle}
 


@@ -382,6 +467,7 @@ Draws a rectangle with the given top left corner, and with the given
 size.  The current pen is used for the outline and the current brush
 for filling the shape.
 
 size.  The current pen is used for the outline and the current brush
 for filling the shape.
 

+

 \membersection{wxDC::DrawRotatedText}\label{wxdcdrawrotatedtext}
 
 \func{void}{DrawRotatedText}{\param{const wxString\& }{text}, \param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{double}{ angle}}
 \membersection{wxDC::DrawRotatedText}\label{wxdcdrawrotatedtext}
 
 \func{void}{DrawRotatedText}{\param{const wxString\& }{text}, \param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{double}{ angle}}


@@ -397,9 +483,10 @@ which is.
 
 \helpref{DrawText}{wxdcdrawtext}
 
 
 \helpref{DrawText}{wxdcdrawtext}
 

+

 \membersection{wxDC::DrawRoundedRectangle}\label{wxdcdrawroundedrectangle}
 
 \membersection{wxDC::DrawRoundedRectangle}\label{wxdcdrawroundedrectangle}
 

-\func{void}{DrawRoundedRectangle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}, \param{double}{ radius = 20}}
+\func{void}{DrawRoundedRectangle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}, \param{double}{ radius}}

 
 Draws a rectangle with the given top left corner, and with the given
 size.  The corners are quarter-circles using the given radius. The
 
 Draws a rectangle with the given top left corner, and with the given
 size.  The corners are quarter-circles using the given radius. The


@@ -414,14 +501,18 @@ a sensible size relative to the size of the rectangle, and also avoids
 the strange effects X produces when the corners are too big for
 the rectangle.
 
 the strange effects X produces when the corners are too big for
 the rectangle.
 

+

 \membersection{wxDC::DrawSpline}\label{wxdcdrawspline}
 
 \membersection{wxDC::DrawSpline}\label{wxdcdrawspline}
 

+\func{void}{DrawSpline}{\param{int }{n}, \param{wxPoint }{points[]}}
+
+Draws a spline between all given control points, using the current
+pen.
+

 \func{void}{DrawSpline}{\param{wxList *}{points}}
 
 Draws a spline between all given control points, using the current
 \func{void}{DrawSpline}{\param{wxList *}{points}}
 
 Draws a spline between all given control points, using the current

-pen.  Doesn't delete the wxList and contents. The spline is drawn
-using a series of lines, using an algorithm taken from the X drawing
-program `XFIG'.
+pen.  Doesn't delete the wxList and contents.

 
 \func{void}{DrawSpline}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}, \param{wxCoord}{ x3}, \param{wxCoord}{ y3}}
 
 
 \func{void}{DrawSpline}{\param{wxCoord}{ x1}, \param{wxCoord}{ y1}, \param{wxCoord}{ x2}, \param{wxCoord}{ y2}, \param{wxCoord}{ x3}, \param{wxCoord}{ y3}}
 


@@ -433,6 +524,7 @@ of wxPoint objects.}
 \perlnote{The wxPerl version of this method accepts a reference to an array
   of wxPoint objects.}
 
 \perlnote{The wxPerl version of this method accepts a reference to an array
   of wxPoint objects.}
 

+

 \membersection{wxDC::DrawText}\label{wxdcdrawtext}
 
 \func{void}{DrawText}{\param{const wxString\& }{text}, \param{wxCoord}{ x}, \param{wxCoord}{ y}}
 \membersection{wxDC::DrawText}\label{wxdcdrawtext}
 
 \func{void}{DrawText}{\param{const wxString\& }{text}, \param{wxCoord}{ x}, \param{wxCoord}{ y}}


@@ -451,6 +543,7 @@ but it is ignored by wxMSW. Thus, you should avoid using logical functions
 with this function in portable programs.
 
 \begin{comment}
 with this function in portable programs.
 
 \begin{comment}

+

 \membersection{wxDC::EnableCache}\label{wxdcenablecache}
 
 \func{static void}{EnableCache}{\param{bool}{ enableCache}}
 \membersection{wxDC::EnableCache}\label{wxdcenablecache}
 
 \func{static void}{EnableCache}{\param{bool}{ enableCache}}


@@ -467,12 +560,14 @@ wxUSE\_DC\_CACHEING preprocessor symbol for portability.
 \helpref{wxDC::CacheEnabled}{wxdccacheenabled}, \helpref{wxDC::ClearCache}
 \end{comment}
 
 \helpref{wxDC::CacheEnabled}{wxdccacheenabled}, \helpref{wxDC::ClearCache}
 \end{comment}
 

+

 \membersection{wxDC::EndDoc}\label{wxdcenddoc}
 
 \func{void}{EndDoc}{\void}
 
 Ends a document (only relevant when outputting to a printer).
 
 \membersection{wxDC::EndDoc}\label{wxdcenddoc}
 
 \func{void}{EndDoc}{\void}
 
 Ends a document (only relevant when outputting to a printer).
 

+

 \membersection{wxDC::EndDrawing}\label{wxdcenddrawing}
 
 \func{void}{EndDrawing}{\void}
 \membersection{wxDC::EndDrawing}\label{wxdcenddrawing}
 
 \func{void}{EndDrawing}{\void}


@@ -481,12 +576,14 @@ Allows optimization of drawing code under MS Windows. Enclose
 drawing primitives between {\bf BeginDrawing} and {\bf EndDrawing}\rtfsp
 calls.
 
 drawing primitives between {\bf BeginDrawing} and {\bf EndDrawing}\rtfsp
 calls.
 

+

 \membersection{wxDC::EndPage}\label{wxdcendpage}
 
 \func{void}{EndPage}{\void}
 
 Ends a document page (only relevant when outputting to a printer).
 
 \membersection{wxDC::EndPage}\label{wxdcendpage}
 
 \func{void}{EndPage}{\void}
 
 Ends a document page (only relevant when outputting to a printer).
 

+

 \membersection{wxDC::FloodFill}\label{wxdcfloodfill}
 
 \func{bool}{FloodFill}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{const wxColour\&}{ colour}, \param{int}{ style=wxFLOOD\_SURFACE}}
 \membersection{wxDC::FloodFill}\label{wxdcfloodfill}
 
 \func{bool}{FloodFill}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{const wxColour\&}{ colour}, \param{int}{ style=wxFLOOD\_SURFACE}}


@@ -505,14 +602,14 @@ Returns false if the operation failed.
 colour borders if the pixels do not match the colour exactly. However the
 function will still return true.
 
 colour borders if the pixels do not match the colour exactly. However the
 function will still return true.
 

-\membersection{wxDC::GetBackground}\label{wxdcgetbackground}

 
 

-\func{wxBrush\&}{GetBackground}{\void}
+\membersection{wxDC::GetBackground}\label{wxdcgetbackground}

 
 \constfunc{const wxBrush\&}{GetBackground}{\void}
 
 Gets the brush used for painting the background (see \helpref{wxDC::SetBackground}{wxdcsetbackground}).
 
 
 \constfunc{const wxBrush\&}{GetBackground}{\void}
 
 Gets the brush used for painting the background (see \helpref{wxDC::SetBackground}{wxdcsetbackground}).
 

+

 \membersection{wxDC::GetBackgroundMode}\label{wxdcgetbackgroundmode}
 
 \constfunc{int}{GetBackgroundMode}{\void}
 \membersection{wxDC::GetBackgroundMode}\label{wxdcgetbackgroundmode}
 
 \constfunc{int}{GetBackgroundMode}{\void}


@@ -523,26 +620,28 @@ Returns the current background mode: {\tt wxSOLID} or {\tt wxTRANSPARENT}.
 
 \helpref{SetBackgroundMode}{wxdcsetbackgroundmode}
 
 
 \helpref{SetBackgroundMode}{wxdcsetbackgroundmode}
 

-\membersection{wxDC::GetBrush}\label{wxdcgetbrush}

 
 

-\func{wxBrush\&}{GetBrush}{\void}
+\membersection{wxDC::GetBrush}\label{wxdcgetbrush}

 
 \constfunc{const wxBrush\&}{GetBrush}{\void}
 
 Gets the current brush (see \helpref{wxDC::SetBrush}{wxdcsetbrush}).
 
 
 \constfunc{const wxBrush\&}{GetBrush}{\void}
 
 Gets the current brush (see \helpref{wxDC::SetBrush}{wxdcsetbrush}).
 

+

 \membersection{wxDC::GetCharHeight}\label{wxdcgetcharheight}
 
 \func{wxCoord}{GetCharHeight}{\void}
 
 Gets the character height of the currently set font.
 
 \membersection{wxDC::GetCharHeight}\label{wxdcgetcharheight}
 
 \func{wxCoord}{GetCharHeight}{\void}
 
 Gets the character height of the currently set font.
 

+

 \membersection{wxDC::GetCharWidth}\label{wxdcgetcharwidth}
 
 \func{wxCoord}{GetCharWidth}{\void}
 
 Gets the average character width of the currently set font.
 
 \membersection{wxDC::GetCharWidth}\label{wxdcgetcharwidth}
 
 \func{wxCoord}{GetCharWidth}{\void}
 
 Gets the average character width of the currently set font.
 

+

 \membersection{wxDC::GetClippingBox}\label{wxdcgetclippingbox}
 
 \func{void}{GetClippingBox}{\param{wxCoord}{ *x}, \param{wxCoord}{ *y}, \param{wxCoord}{ *width}, \param{wxCoord}{ *height}}
 \membersection{wxDC::GetClippingBox}\label{wxdcgetclippingbox}
 
 \func{void}{GetClippingBox}{\param{wxCoord}{ *x}, \param{wxCoord}{ *y}, \param{wxCoord}{ *width}, \param{wxCoord}{ *height}}


@@ -555,47 +654,60 @@ rectangle are returned as a tuple.}
 \perlnote{This method takes no arguments and returns a four element list
 {\tt ( x, y, width, height )}}
 
 \perlnote{This method takes no arguments and returns a four element list
 {\tt ( x, y, width, height )}}
 

-\membersection{wxDC::GetFont}\label{wxdcgetfont}

 
 

-\func{wxFont\&}{GetFont}{\void}
+\membersection{wxDC::GetFont}\label{wxdcgetfont}

 
 \constfunc{const wxFont\&}{GetFont}{\void}
 
 Gets the current font (see \helpref{wxDC::SetFont}{wxdcsetfont}).
 
 
 \constfunc{const wxFont\&}{GetFont}{\void}
 
 Gets the current font (see \helpref{wxDC::SetFont}{wxdcsetfont}).
 

+

 \membersection{wxDC::GetLogicalFunction}\label{wxdcgetlogicalfunction}
 
 \func{int}{GetLogicalFunction}{\void}
 
 Gets the current logical function (see \helpref{wxDC::SetLogicalFunction}{wxdcsetlogicalfunction}).
 
 \membersection{wxDC::GetLogicalFunction}\label{wxdcgetlogicalfunction}
 
 \func{int}{GetLogicalFunction}{\void}
 
 Gets the current logical function (see \helpref{wxDC::SetLogicalFunction}{wxdcsetlogicalfunction}).
 

+

 \membersection{wxDC::GetMapMode}\label{wxdcgetmapmode}
 
 \func{int}{GetMapMode}{\void}
 
 Gets the {\it mapping mode} for the device context (see \helpref{wxDC::SetMapMode}{wxdcsetmapmode}).
 
 \membersection{wxDC::GetMapMode}\label{wxdcgetmapmode}
 
 \func{int}{GetMapMode}{\void}
 
 Gets the {\it mapping mode} for the device context (see \helpref{wxDC::SetMapMode}{wxdcsetmapmode}).
 

-\membersection{wxDC::GetOptimization}\label{wxdcgetoptimization}

 
 

-\func{bool}{GetOptimization}{\void}
+\membersection{wxDC::GetPartialTextExtents}\label{wxdcgetpartialtextextents}

 
 

-Returns true if device context optimization is on.
-See \helpref{wxDC::SetOptimization}{wxsetoptimization} for details.
+\constfunc{bool}{GetPartialTextExtents}{\param{const wxString\&  }{text}, 
+\param{wxArrayInt\& }{widths}}

 
 

-\membersection{wxDC::GetPen}\label{wxdcgetpen}
+Fills the {\it widths} array with the widths from the beginning of 
+{\it text} to the corresponding character of {\it text}.  The generic
+version simply builds a running total of the widths of each character
+using \helpref{GetTextExtent}{wxdcgettextextent}, however if the
+various platforms have a native API function that is faster or more
+accurate than the generic implementation then it should be used
+instead. 

 
 

-\func{wxPen\&}{GetPen}{\void}
+\pythonnote{This method only takes the {\it text} parameter and
+  returns a Python list of integers.}
+
+
+\membersection{wxDC::GetPen}\label{wxdcgetpen}

 
 \constfunc{const wxPen\&}{GetPen}{\void}
 
 Gets the current pen (see \helpref{wxDC::SetPen}{wxdcsetpen}).
 
 
 \constfunc{const wxPen\&}{GetPen}{\void}
 
 Gets the current pen (see \helpref{wxDC::SetPen}{wxdcsetpen}).
 

+

 \membersection{wxDC::GetPixel}\label{wxdcgetpixel}
 
 \func{bool}{GetPixel}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxColour *}{colour}}
 
 \membersection{wxDC::GetPixel}\label{wxdcgetpixel}
 
 \func{bool}{GetPixel}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxColour *}{colour}}
 

-Sets {\it colour} to the colour at the specified location. Windows only; an X implementation
-is being worked on. Not available for wxPostScriptDC or wxMetafileDC.
+Gets in {\it colour} the colour at the specified location.
+Not available for wxPostScriptDC or wxMetafileDC.
+
+Note that setting a pixel can be done using \helpref{DrawPoint}{wxdcdrawpoint}.

 
 \pythonnote{For wxPython the wxColour value is returned and is not
 required as a parameter.}
 
 \pythonnote{For wxPython the wxColour value is returned and is not
 required as a parameter.}


@@ -603,16 +715,20 @@ required as a parameter.}
 \perlnote{This method only takes the parameters {\tt x} and {\tt y} and returns
 a Wx::Colour value}
 
 \perlnote{This method only takes the parameters {\tt x} and {\tt y} and returns
 a Wx::Colour value}
 

+\membersection{wxDC::GetPPI}\label{wxdcgetppi}
+
+\constfunc{wxSize}{GetPPI}{\void}
+
+Returns the resolution of the device in pixels per inch.
+

 \membersection{wxDC::GetSize}\label{wxdcgetsize}
 
 \membersection{wxDC::GetSize}\label{wxdcgetsize}
 

-\func{void}{GetSize}{\param{wxCoord *}{width}, \param{wxCoord *}{height}}
+\constfunc{void}{GetSize}{\param{wxCoord *}{width}, \param{wxCoord *}{height}}

 
 

-For a PostScript device context, this gets the maximum size of graphics
-drawn so far on the device context.
+\constfunc{wxSize}{GetSize}{\void}

 
 

-For a Windows printer device context, this gets the horizontal and vertical
-resolution. It can be used to scale graphics to fit the page when using
-a Windows printer device context. For example, if {\it maxX} and {\it maxY}\rtfsp
+This gets the horizontal and vertical resolution in device units. It can be used to scale graphics to fit the page.
+For example, if {\it maxX} and {\it maxY}\rtfsp

 represent the maximum horizontal and vertical `pixel' values used in your
 application, the following code will scale the graphic to fit on the
 printer page:
 represent the maximum horizontal and vertical `pixel' values used in your
 application, the following code will scale the graphic to fit on the
 printer page:


@@ -641,14 +757,21 @@ implements the following methods:\par
 \end{twocollist}
 }}
 
 \end{twocollist}
 }}
 

-\membersection{wxDC::GetTextBackground}\label{wxdcgettextbackground}
+\membersection{wxDC::GetSizeMM}\label{wxdcgetsizemm}
+
+\constfunc{void}{GetSizeMM}{\param{wxCoord *}{width}, \param{wxCoord *}{height}}

 
 

-\func{wxColour\&}{GetTextBackground}{\void}
+\constfunc{wxSize}{GetSizeMM}{\void}
+
+Returns the horizontal and vertical resolution in millimetres.
+
+\membersection{wxDC::GetTextBackground}\label{wxdcgettextbackground}

 
 \constfunc{const wxColour\&}{GetTextBackground}{\void}
 
 Gets the current text background colour (see \helpref{wxDC::SetTextBackground}{wxdcsettextbackground}).
 
 
 \constfunc{const wxColour\&}{GetTextBackground}{\void}
 
 Gets the current text background colour (see \helpref{wxDC::SetTextBackground}{wxdcsettextbackground}).
 

+

 \membersection{wxDC::GetTextExtent}\label{wxdcgettextextent}
 
 \func{void}{GetTextExtent}{\param{const wxString\& }{string}, \param{wxCoord *}{w}, \param{wxCoord *}{h},\\
 \membersection{wxDC::GetTextExtent}\label{wxdcgettextextent}
 
 \func{void}{GetTextExtent}{\param{const wxString\& }{string}, \param{wxCoord *}{w}, \param{wxCoord *}{h},\\


@@ -681,9 +804,8 @@ See also \helpref{wxFont}{wxfont}, \helpref{wxDC::SetFont}{wxdcsetfont}.
   array {\tt ( width, height, descent, externalLeading )}
 }
 
   array {\tt ( width, height, descent, externalLeading )}
 }
 

-\membersection{wxDC::GetTextForeground}\label{wxdcgettextforeground}

 
 

-\func{wxColour\&}{GetTextForeground}{\void}
+\membersection{wxDC::GetTextForeground}\label{wxdcgettextforeground}

 
 \constfunc{const wxColour\&}{GetTextForeground}{\void}
 
 
 \constfunc{const wxColour\&}{GetTextForeground}{\void}
 


@@ -699,6 +821,7 @@ Gets the current user scale factor (set by \helpref{SetUserScale}{wxdcsetusersca
 \perlnote{In wxPerl this method takes no arguments and return a two element
  array {\tt ( x, y )}}
 
 \perlnote{In wxPerl this method takes no arguments and return a two element
  array {\tt ( x, y )}}
 

+

 \membersection{wxDC::LogicalToDeviceX}\label{wxdclogicaltodevicex}
 
 \func{wxCoord}{LogicalToDeviceX}{\param{wxCoord}{ x}}
 \membersection{wxDC::LogicalToDeviceX}\label{wxdclogicaltodevicex}
 
 \func{wxCoord}{LogicalToDeviceX}{\param{wxCoord}{ x}}


@@ -706,6 +829,7 @@ Gets the current user scale factor (set by \helpref{SetUserScale}{wxdcsetusersca
 Converts logical X coordinate to device coordinate, using the current
 mapping mode.
 
 Converts logical X coordinate to device coordinate, using the current
 mapping mode.
 

+

 \membersection{wxDC::LogicalToDeviceXRel}\label{wxdclogicaltodevicexrel}
 
 \func{wxCoord}{LogicalToDeviceXRel}{\param{wxCoord}{ x}}
 \membersection{wxDC::LogicalToDeviceXRel}\label{wxdclogicaltodevicexrel}
 
 \func{wxCoord}{LogicalToDeviceXRel}{\param{wxCoord}{ x}}


@@ -714,6 +838,7 @@ Converts logical X coordinate to relative device coordinate, using the current
 mapping mode but ignoring the x axis orientation.
 Use this for converting a width, for example.
 
 mapping mode but ignoring the x axis orientation.
 Use this for converting a width, for example.
 

+

 \membersection{wxDC::LogicalToDeviceY}\label{wxdclogicaltodevicey}
 
 \func{wxCoord}{LogicalToDeviceY}{\param{wxCoord}{ y}}
 \membersection{wxDC::LogicalToDeviceY}\label{wxdclogicaltodevicey}
 
 \func{wxCoord}{LogicalToDeviceY}{\param{wxCoord}{ y}}


@@ -721,6 +846,7 @@ Use this for converting a width, for example.
 Converts logical Y coordinate to device coordinate, using the current
 mapping mode.
 
 Converts logical Y coordinate to device coordinate, using the current
 mapping mode.
 

+

 \membersection{wxDC::LogicalToDeviceYRel}\label{wxdclogicaltodeviceyrel}
 
 \func{wxCoord}{LogicalToDeviceYRel}{\param{wxCoord}{ y}}
 \membersection{wxDC::LogicalToDeviceYRel}\label{wxdclogicaltodeviceyrel}
 
 \func{wxCoord}{LogicalToDeviceYRel}{\param{wxCoord}{ y}}


@@ -729,36 +855,42 @@ Converts logical Y coordinate to relative device coordinate, using the current
 mapping mode but ignoring the y axis orientation.
 Use this for converting a height, for example.
 
 mapping mode but ignoring the y axis orientation.
 Use this for converting a height, for example.
 

+

 \membersection{wxDC::MaxX}\label{wxdcmaxx}
 
 \func{wxCoord}{MaxX}{\void}
 
 Gets the maximum horizontal extent used in drawing commands so far.
 
 \membersection{wxDC::MaxX}\label{wxdcmaxx}
 
 \func{wxCoord}{MaxX}{\void}
 
 Gets the maximum horizontal extent used in drawing commands so far.
 

+

 \membersection{wxDC::MaxY}\label{wxdcmaxy}
 
 \func{wxCoord}{MaxY}{\void}
 
 Gets the maximum vertical extent used in drawing commands so far.
 
 \membersection{wxDC::MaxY}\label{wxdcmaxy}
 
 \func{wxCoord}{MaxY}{\void}
 
 Gets the maximum vertical extent used in drawing commands so far.
 

+

 \membersection{wxDC::MinX}\label{wxdcminx}
 
 \func{wxCoord}{MinX}{\void}
 
 Gets the minimum horizontal extent used in drawing commands so far.
 
 \membersection{wxDC::MinX}\label{wxdcminx}
 
 \func{wxCoord}{MinX}{\void}
 
 Gets the minimum horizontal extent used in drawing commands so far.
 

+

 \membersection{wxDC::MinY}\label{wxdcminy}
 
 \func{wxCoord}{MinY}{\void}
 
 Gets the minimum vertical extent used in drawing commands so far.
 
 \membersection{wxDC::MinY}\label{wxdcminy}
 
 \func{wxCoord}{MinY}{\void}
 
 Gets the minimum vertical extent used in drawing commands so far.
 

+

 \membersection{wxDC::Ok}\label{wxdcok}
 
 \func{bool}{Ok}{\void}
 
 Returns true if the DC is ok to use.
 
 \membersection{wxDC::Ok}\label{wxdcok}
 
 \func{bool}{Ok}{\void}
 
 Returns true if the DC is ok to use.
 

+

 \membersection{wxDC::ResetBoundingBox}\label{wxdcresetboundingbox}
 
 \func{void}{ResetBoundingBox}{\void}
 \membersection{wxDC::ResetBoundingBox}\label{wxdcresetboundingbox}
 
 \func{void}{ResetBoundingBox}{\void}


@@ -770,14 +902,15 @@ doesn't contain anything.
 
 \helpref{CalcBoundingBox}{wxdccalcboundingbox}
 
 
 \helpref{CalcBoundingBox}{wxdccalcboundingbox}
 

+

 \membersection{wxDC::SetAxisOrientation}\label{wxdcsetaxisorientation}
 
 \func{void}{SetAxisOrientation}{\param{bool}{ xLeftRight},
                                 \param{bool}{ yBottomUp}}
 
 Sets the x and y axis orientation (i.e., the direction from lowest to
 \membersection{wxDC::SetAxisOrientation}\label{wxdcsetaxisorientation}
 
 \func{void}{SetAxisOrientation}{\param{bool}{ xLeftRight},
                                 \param{bool}{ yBottomUp}}
 
 Sets the x and y axis orientation (i.e., the direction from lowest to

-highest values on the axis). The default orientation is the natural
-orientation, e.g. x axis from left to right and y axis from bottom up.
+highest values on the axis). The default orientation is 
+x axis from left to right and y axis from top down.

 
 \wxheading{Parameters}
 
 
 \wxheading{Parameters}
 


@@ -787,15 +920,6 @@ left to right orientation, false to invert it.}
 \docparam{yBottomUp}{True to set the y axis orientation to the natural
 bottom up orientation, false to invert it.}
 
 \docparam{yBottomUp}{True to set the y axis orientation to the natural
 bottom up orientation, false to invert it.}
 

-\membersection{wxDC::SetDeviceOrigin}\label{wxdcsetdeviceorigin}
-
-\func{void}{SetDeviceOrigin}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
-
-Sets the device origin (i.e., the origin in pixels after scaling has been
-applied).
-
-This function may be useful in Windows printing
-operations for placing a graphic on a page.

 
 \membersection{wxDC::SetBackground}\label{wxdcsetbackground}
 
 
 \membersection{wxDC::SetBackground}\label{wxdcsetbackground}
 


@@ -803,6 +927,7 @@ operations for placing a graphic on a page.
 
 Sets the current background brush for the DC.
 
 
 Sets the current background brush for the DC.
 

+

 \membersection{wxDC::SetBackgroundMode}\label{wxdcsetbackgroundmode}
 
 \func{void}{SetBackgroundMode}{\param{int}{ mode}}
 \membersection{wxDC::SetBackgroundMode}\label{wxdcsetbackgroundmode}
 
 \func{void}{SetBackgroundMode}{\param{int}{ mode}}


@@ -810,6 +935,23 @@ Sets the current background brush for the DC.
 {\it mode} may be one of wxSOLID and wxTRANSPARENT. This setting determines
 whether text will be drawn with a background colour or not.
 
 {\it mode} may be one of wxSOLID and wxTRANSPARENT. This setting determines
 whether text will be drawn with a background colour or not.
 

+
+\membersection{wxDC::SetBrush}\label{wxdcsetbrush}
+
+\func{void}{SetBrush}{\param{const wxBrush\& }{brush}}
+
+Sets the current brush for the DC.
+
+If the argument is wxNullBrush, the current brush is selected out of the device
+context, and the original brush restored, allowing the current brush to
+be destroyed safely.
+
+See also \helpref{wxBrush}{wxbrush}.
+
+See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
+when drawing into a monochrome bitmap.
+
+ 

 \membersection{wxDC::SetClippingRegion}\label{wxdcsetclippingregion}
 
 \func{void}{SetClippingRegion}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
 \membersection{wxDC::SetClippingRegion}\label{wxdcsetclippingregion}
 
 \func{void}{SetClippingRegion}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}


@@ -834,31 +976,17 @@ when only a known area of the screen is damaged.
 
 \helpref{wxDC::DestroyClippingRegion}{wxdcdestroyclippingregion}, \helpref{wxRegion}{wxregion}
 
 
 \helpref{wxDC::DestroyClippingRegion}{wxdcdestroyclippingregion}, \helpref{wxRegion}{wxregion}
 

-\membersection{wxDC::SetPalette}\label{wxdcsetpalette}

 
 

-\func{void}{SetPalette}{\param{const wxPalette\& }{palette}}
-
-If this is a window DC or memory DC, assigns the given palette to the window
-or bitmap associated with the DC. If the argument is wxNullPalette, the current
-palette is selected out of the device context, and the original palette
-restored.
-
-See \helpref{wxPalette}{wxpalette} for further details.
-
-\membersection{wxDC::SetBrush}\label{wxdcsetbrush}
-
-\func{void}{SetBrush}{\param{const wxBrush\& }{brush}}
+\membersection{wxDC::SetDeviceOrigin}\label{wxdcsetdeviceorigin}

 
 

-Sets the current brush for the DC.
+\func{void}{SetDeviceOrigin}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}

 
 

-If the argument is wxNullBrush, the current brush is selected out of the device
-context, and the original brush restored, allowing the current brush to
-be destroyed safely.
+Sets the device origin (i.e., the origin in pixels after scaling has been
+applied).

 
 

-See also \helpref{wxBrush}{wxbrush}.
+This function may be useful in Windows printing
+operations for placing a graphic on a page.

 
 

-See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
-when drawing into a monochrome bitmap.

 
 \membersection{wxDC::SetFont}\label{wxdcsetfont}
 
 
 \membersection{wxDC::SetFont}\label{wxdcsetfont}
 


@@ -869,6 +997,7 @@ should not pass {\tt wxNullFont} to this method.
 
 See also \helpref{wxFont}{wxfont}.
 
 
 See also \helpref{wxFont}{wxfont}.
 

+

 \membersection{wxDC::SetLogicalFunction}\label{wxdcsetlogicalfunction}
 
 \func{void}{SetLogicalFunction}{\param{int}{ function}}
 \membersection{wxDC::SetLogicalFunction}\label{wxdcsetlogicalfunction}
 
 \func{void}{SetLogicalFunction}{\param{int}{ function}}


@@ -906,6 +1035,7 @@ The others combine the current colour and the background using a
 logical operation.  wxINVERT is commonly used for drawing rubber bands or
 moving outlines, since drawing twice reverts to the original colour.
 
 logical operation.  wxINVERT is commonly used for drawing rubber bands or
 moving outlines, since drawing twice reverts to the original colour.
 

+

 \membersection{wxDC::SetMapMode}\label{wxdcsetmapmode}
 
 \func{void}{SetMapMode}{\param{int}{ int}}
 \membersection{wxDC::SetMapMode}\label{wxdcsetmapmode}
 
 \func{void}{SetMapMode}{\param{int}{ int}}


@@ -918,12 +1048,10 @@ user scale} (see \helpref{wxDC::SetUserScale}{wxdcsetuserscale}) scales the text
 Windows, scalable TrueType fonts are always used; in X, results depend
 on availability of fonts, but usually a reasonable match is found.
 
 Windows, scalable TrueType fonts are always used; in X, results depend
 on availability of fonts, but usually a reasonable match is found.
 

-Note that the coordinate origin should ideally be selectable, but for
-now is always at the top left of the screen/printer.
+The coordinate origin is always at the top left of the screen/printer.

 
 

-Drawing to a Windows printer device context under UNIX
-uses the current mapping mode, but mapping mode is currently ignored for
-PostScript output.
+Drawing to a Windows printer device context uses the current mapping mode,
+but mapping mode is currently ignored for PostScript output.

 
 The mapping mode can be one of the following:
 
 
 The mapping mode can be one of the following:
 


@@ -936,19 +1064,18 @@ The mapping mode can be one of the following:
 \twocolitem{wxMM\_TEXT}{Each logical unit is 1 pixel.}
 \end{twocollist}
 
 \twocolitem{wxMM\_TEXT}{Each logical unit is 1 pixel.}
 \end{twocollist}
 

-\membersection{wxDC::SetOptimization}\label{wxsetoptimization}

 
 

-\func{void}{SetOptimization}{\param{bool }{optimize}}
+\membersection{wxDC::SetPalette}\label{wxdcsetpalette}
+
+\func{void}{SetPalette}{\param{const wxPalette\& }{palette}}
+
+If this is a window DC or memory DC, assigns the given palette to the window
+or bitmap associated with the DC. If the argument is wxNullPalette, the current
+palette is selected out of the device context, and the original palette
+restored.

 
 

-If {\it optimize} is true (the default), this function sets optimization mode on.
-This currently means that under X, the device context will not try to set a pen or brush
-property if it is known to be set already. This approach can fall down
-if non-wxWindows code is using the same device context or window, for example
-when the window is a panel on which the windowing system draws panel items.
-The wxWindows device context 'memory' will now be out of step with reality.
+See \helpref{wxPalette}{wxpalette} for further details. 

 
 

-Setting optimization off, drawing, then setting it back on again, is a trick
-that must occasionally be employed.

 
 \membersection{wxDC::SetPen}\label{wxdcsetpen}
 
 
 \membersection{wxDC::SetPen}\label{wxdcsetpen}
 


@@ -962,12 +1089,14 @@ context, and the original pen restored.
 See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
 when drawing into a monochrome bitmap.
 
 See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
 when drawing into a monochrome bitmap.
 

+

 \membersection{wxDC::SetTextBackground}\label{wxdcsettextbackground}
 
 \func{void}{SetTextBackground}{\param{const wxColour\& }{colour}}
 
 Sets the current text background colour for the DC.
 
 \membersection{wxDC::SetTextBackground}\label{wxdcsettextbackground}
 
 \func{void}{SetTextBackground}{\param{const wxColour\& }{colour}}
 
 Sets the current text background colour for the DC.
 

+

 \membersection{wxDC::SetTextForeground}\label{wxdcsettextforeground}
 
 \func{void}{SetTextForeground}{\param{const wxColour\& }{colour}}
 \membersection{wxDC::SetTextForeground}\label{wxdcsettextforeground}
 
 \func{void}{SetTextForeground}{\param{const wxColour\& }{colour}}


@@ -977,6 +1106,7 @@ Sets the current text foreground colour for the DC.
 See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
 when drawing into a monochrome bitmap.
 
 See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
 when drawing into a monochrome bitmap.
 

+

 \membersection{wxDC::SetUserScale}\label{wxdcsetuserscale}
 
 \func{void}{SetUserScale}{\param{double}{ xScale}, \param{double}{ yScale}}
 \membersection{wxDC::SetUserScale}\label{wxdcsetuserscale}
 
 \func{void}{SetUserScale}{\param{double}{ xScale}, \param{double}{ yScale}}


@@ -984,12 +1114,14 @@ when drawing into a monochrome bitmap.
 Sets the user scaling factor, useful for applications which require
 `zooming'.
 
 Sets the user scaling factor, useful for applications which require
 `zooming'.
 

+

 \membersection{wxDC::StartDoc}\label{wxdcstartdoc}
 
 \func{bool}{StartDoc}{\param{const wxString\& }{message}}
 
 Starts a document (only relevant when outputting to a printer).
 \membersection{wxDC::StartDoc}\label{wxdcstartdoc}
 
 \func{bool}{StartDoc}{\param{const wxString\& }{message}}
 
 Starts a document (only relevant when outputting to a printer).

-Message is a message to show whilst printing.
+Message is a message to show while printing.
+

 
 \membersection{wxDC::StartPage}\label{wxdcstartpage}
 
 
 \membersection{wxDC::StartPage}\label{wxdcstartpage}
 


@@ -999,9 +1131,9 @@ Starts a document page (only relevant when outputting to a printer).
 
 \section{\class{wxDCClipper}}\label{wxdcclipper}
 
 
 \section{\class{wxDCClipper}}\label{wxdcclipper}
 

-This is a small helper class which sets the specified to its constructor
+This is a small helper class which sets the specified DC to its constructor

 clipping region and then automatically destroys it in its destructor. Using
 clipping region and then automatically destroys it in its destructor. Using

-it ensures that unwanted clipping region is not left set on the DC.
+it ensures that an unwanted clipping region is not left set on the DC.

 
 \wxheading{Derived from}
 
 
 \wxheading{Derived from}
 


@@ -1017,16 +1149,18 @@ No base class
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxDCClipper::wxDCClipper}
+
+\membersection{wxDCClipper::wxDCClipper}\label{wxdcclipperctor}

 
 \func{}{wxDCClipper}{\param{wxDC\& }{dc}, \param{wxCoord }{x},\param{wxCoord }{y},\param{wxCoord }{w},\param{wxCoord }{h},}
 
 \func{}{wxDCClipper}{\param{wxDC\& }{dc}, \param{const wxRect\&}{ rect}}
 
 
 \func{}{wxDCClipper}{\param{wxDC\& }{dc}, \param{wxCoord }{x},\param{wxCoord }{y},\param{wxCoord }{w},\param{wxCoord }{h},}
 
 \func{}{wxDCClipper}{\param{wxDC\& }{dc}, \param{const wxRect\&}{ rect}}
 

-Constructor: sets the the clipping region for the given device context to the
+Constructor: sets the clipping region for the given device context to the

 specified rectangle.
 
 specified rectangle.
 

-\membersection{wxDCClipper::\destruct{wxDCClipper}}
+
+\membersection{wxDCClipper::\destruct{wxDCClipper}}\label{wxdcclipperdtor}

 
 \func{}{\destruct{wxDCClipper}}{\void}
 
 
 \func{}{\destruct{wxDCClipper}}{\void}