#include "wx/stream.h"
+#ifdef HAVE_STATFS
+# ifdef __BSD__
+# include <sys/param.h>
+# include <sys/mount.h>
+# else
+# include <sys/vfs.h>
+# endif
+#endif // HAVE_STATFS
+
+#ifdef HAVE_STATVFS
+ #include <sys/statvfs.h>
+
+ #define statfs statvfs
+#endif // HAVE_STATVFS
+
#if wxUSE_GUI
#include "wx/unix/execute.h"
#endif
// process management
// ----------------------------------------------------------------------------
-int wxKill(long pid, wxSignal sig)
+int wxKill(long pid, wxSignal sig, wxKillError *rc)
{
- return kill((pid_t)pid, (int)sig);
+ int err = kill((pid_t)pid, (int)sig);
+ if ( rc )
+ {
+ switch ( errno )
+ {
+ case 0:
+ *rc = wxKILL_OK;
+ break;
+
+ case EINVAL:
+ *rc = wxKILL_BAD_SIGNAL;
+ break;
+
+ case EPERM:
+ *rc = wxKILL_ACCESS_DENIED;
+ break;
+
+ case ESRCH:
+ *rc = wxKILL_NO_PROCESS;
+ break;
+
+ default:
+ // this goes against Unix98 docs so log it
+ wxLogDebug(_T("unexpected kill(2) return value %d"), err);
+
+ // something else...
+ *rc = wxKILL_ERROR;
+ }
+ }
+
+ return err;
}
#define WXEXECUTE_NARGS 127
-long wxExecute( const wxString& command, bool sync, wxProcess *process )
+long wxExecute( const wxString& command, int flags, wxProcess *process )
{
wxCHECK_MSG( !command.IsEmpty(), 0, wxT("can't exec empty command") );
argv[argc] = NULL;
// do execute the command
- long lRc = wxExecute(argv, sync, process);
+ long lRc = wxExecute(argv, flags, process);
// clean up
argc = 0;
bool wxShell(const wxString& command)
{
- return wxExecute(wxMakeShellCommand(command), TRUE /* sync */) == 0;
+ return wxExecute(wxMakeShellCommand(command), wxEXEC_SYNC) == 0;
}
bool wxShell(const wxString& command, wxArrayString& output)
return wxExecute(wxMakeShellCommand(command), output);
}
+// Shutdown or reboot the PC
+bool wxShutdown(wxShutdownFlags wFlags)
+{
+ wxChar level;
+ switch ( wFlags )
+ {
+ case wxSHUTDOWN_POWEROFF:
+ level = _T('0');
+ break;
+
+ case wxSHUTDOWN_REBOOT:
+ level = _T('6');
+ break;
+
+ default:
+ wxFAIL_MSG( _T("unknown wxShutdown() flag") );
+ return FALSE;
+ }
+
+ return system(wxString::Format(_T("init %c"), level).mb_str()) == 0;
+}
+
+
#if wxUSE_GUI
void wxHandleProcessTermination(wxEndProcessData *proc_data)
{
- int pid = (proc_data->pid > 0) ? proc_data->pid : -(proc_data->pid);
-
- // waitpid is POSIX so should be available everywhere, however on older
- // systems wait() might be used instead in a loop (until the right pid
- // terminates)
- int status = 0;
- int rc;
-
- // wait for child termination and if waitpid() was interrupted, try again
- do
+ // notify user about termination if required
+ if ( proc_data->process )
{
- rc = waitpid(pid, &status, 0);
+ proc_data->process->OnTerminate(proc_data->pid, proc_data->exitcode);
}
- while ( rc == -1 && errno == EINTR );
-
- if( rc == -1 || ! (WIFEXITED(status) || WIFSIGNALED(status)) )
+ // clean up
+ if ( proc_data->pid > 0 )
{
- wxLogSysError(_("Waiting for subprocess termination failed"));
- /* AFAIK, this can only happen if something went wrong within
- wxGTK, i.e. due to a race condition or some serious bug.
- After having fixed the order of statements in
- GTK_EndProcessDetector(). (KB)
- */
+ delete proc_data;
}
else
{
- // notify user about termination if required
- if (proc_data->process)
- {
- proc_data->process->OnTerminate(proc_data->pid,
- WEXITSTATUS(status));
- }
- // clean up
- if ( proc_data->pid > 0 )
- {
- delete proc_data;
- }
- else
- {
- // wxExecute() will know about it
- proc_data->exitcode = status;
-
- proc_data->pid = 0;
- }
+ // let wxExecute() know that the process has terminated
+ proc_data->pid = 0;
}
}
// wxStream classes to support IO redirection in wxExecute
// ----------------------------------------------------------------------------
+#if wxUSE_STREAMS
+
class wxProcessFileInputStream : public wxInputStream
{
public:
return ret;
}
+// ----------------------------------------------------------------------------
+// wxStreamTempBuffer
+// ----------------------------------------------------------------------------
+
+/*
+ Extract of a mail to wx-users to give the context of the problem we are
+ trying to solve here:
+
+ MC> If I run the command:
+ MC> find . -name "*.h" -exec grep linux {} \;
+ MC> in the exec sample synchronously from the 'Capture command output'
+ MC> menu, wxExecute never returns. I have to xkill it. Has anyone
+ MC> else encountered this?
+
+ Yes, I can reproduce it too.
+
+ I even think I understand why it happens: before launching the external
+ command we set up a pipe with a valid file descriptor on the reading side
+ when the output is redirected. So the subprocess happily writes to it ...
+ until the pipe buffer (which is usually quite big on Unix, I think the
+ default is 4Mb) is full. Then the writing process stops and waits until we
+ read some data from the pipe to be able to continue writing to it but we
+ never do it because we wait until it terminates to start reading and so we
+ have a classical deadlock.
+
+ Here is the fix: we now read the output as soon as it appears into a temp
+ buffer (wxStreamTempBuffer object) and later just stuff it back into the
+ stream when the process terminates. See supporting code in wxExecute()
+ itself as well.
+*/
+
+class wxStreamTempBuffer
+{
+public:
+ wxStreamTempBuffer();
+
+ // call to associate a stream with this buffer, otherwise nothing happens
+ // at all
+ void Init(wxInputStream *stream);
+
+ // check for input on our stream and cache it in our buffer if any
+ void Update();
+
+ ~wxStreamTempBuffer();
+
+private:
+ // the stream we're buffering, if NULL we don't do anything at all
+ wxInputStream *m_stream;
+
+ // the buffer of size m_size (NULL if m_size == 0)
+ void *m_buffer;
+
+ // the size of the buffer
+ size_t m_size;
+};
+
+wxStreamTempBuffer::wxStreamTempBuffer()
+{
+ m_stream = NULL;
+ m_buffer = NULL;
+ m_size = 0;
+}
+
+void wxStreamTempBuffer::Init(wxInputStream *stream)
+{
+ m_stream = stream;
+}
+
+void wxStreamTempBuffer::Update()
+{
+ if ( m_stream && !m_stream->Eof() )
+ {
+ // realloc in blocks of 1Kb - surely not the best strategy but which
+ // one is?
+ static const size_t incSize = 1024;
+
+ void *buf = realloc(m_buffer, m_size + incSize);
+ if ( !buf )
+ {
+ // don't read any more, we don't have enough memory to do it
+ m_stream = NULL;
+ }
+ else // got memory for the buffer
+ {
+ m_buffer = buf;
+ m_stream->Read((char *)m_buffer + m_size, incSize);
+ m_size += incSize;
+ }
+ }
+}
+
+wxStreamTempBuffer::~wxStreamTempBuffer()
+{
+ if ( m_buffer )
+ {
+ m_stream->Ungetch(m_buffer, m_size);
+ free(m_buffer);
+ }
+}
+
+#endif // wxUSE_STREAMS
+
long wxExecute(wxChar **argv,
- bool sync,
+ int flags,
wxProcess *process)
{
// for the sync execution, we return -1 to indicate failure, but for async
- // cse we return 0 which is never a valid PID
- long errorRetCode = sync ? -1 : 0;
+ // case we return 0 which is never a valid PID
+ //
+ // we define this as a macro, not a variable, to avoid compiler warnings
+ // about "ERROR_RETURN_CODE value may be clobbered by fork()"
+ #define ERROR_RETURN_CODE ((flags & wxEXEC_SYNC) ? -1 : 0)
- wxCHECK_MSG( *argv, errorRetCode, wxT("can't exec empty command") );
+ wxCHECK_MSG( *argv, ERROR_RETURN_CODE, wxT("can't exec empty command") );
#if wxUSE_UNICODE
int mb_argc = 0;
ARGS_CLEANUP;
- return errorRetCode;
+ return ERROR_RETURN_CODE;
}
#endif // wxUSE_GUI
ARGS_CLEANUP;
- return errorRetCode;
+ return ERROR_RETURN_CODE;
}
}
ARGS_CLEANUP;
- return errorRetCode;
+ return ERROR_RETURN_CODE;
}
else if ( pid == 0 ) // we're in child
{
// input/output which might block the process or irritate the user. If
// one wants proper IO for the subprocess, the right thing to do is to
// start an xterm executing it.
- if ( !sync )
+ if ( !(flags & wxEXEC_SYNC) )
{
for ( int fd = 0; fd < FD_SETSIZE; fd++ )
{
if ( fd != STDERR_FILENO )
close(fd);
}
+
+#ifndef __VMS
+ if ( flags & wxEXEC_MAKE_GROUP_LEADER )
+ {
+ // Set process group to child process' pid. Then killing -pid
+ // of the parent will kill the process and all of its children.
+ setsid();
+ }
+#endif
}
// redirect stdio, stdout and stderr
// there is no return after successful exec()
_exit(-1);
+
+ // some compilers complain about missing return - of course, they
+ // should know that exit() doesn't return but what else can we do if
+ // they don't?
+#if defined(__VMS) || defined(__INTEL_COMPILER)
+ return 0;
+#endif
}
else // we're in parent
{
ARGS_CLEANUP;
// pipe initialization: construction of the wxStreams
+#if wxUSE_STREAMS
+ wxStreamTempBuffer bufIn, bufErr;
+#endif // wxUSE_STREAMS
+
if ( process && process->IsRedirected() )
{
- // These two streams are relative to this process.
+#if wxUSE_STREAMS
+ // in/out for subprocess correspond to our out/in
wxOutputStream *outStream = new wxProcessFileOutputStream(pipeIn[1]);
wxInputStream *inStream = new wxProcessFileInputStream(pipeOut[0]);
wxInputStream *errStream = new wxProcessFileInputStream(pipeErr[0]);
+ process->SetPipeStreams(inStream, outStream, errStream);
+
+ bufIn.Init(inStream);
+ bufErr.Init(inStream);
+#endif // wxUSE_STREAMS
+
close(pipeIn[0]); // close reading side
close(pipeOut[1]); // close writing side
close(pipeErr[1]); // close writing side
-
- process->SetPipeStreams(inStream, outStream, errStream);
}
-#if wxUSE_GUI
+#if wxUSE_GUI && !defined(__WXMICROWIN__)
wxEndProcessData *data = new wxEndProcessData;
- if ( sync )
+ if ( flags & wxEXEC_SYNC )
{
// we may have process for capturing the program output, but it's
// not used in wxEndProcessData in the case of sync execution
wxBusyCursor bc;
wxWindowDisabler wd;
- // it will be set to 0 from GTK_EndProcessDetector
- while (data->pid != 0)
+ // data->pid will be set to 0 from GTK_EndProcessDetector when the
+ // process terminates
+ while ( data->pid != 0 )
+ {
+#if wxUSE_STREAMS
+ bufIn.Update();
+ bufErr.Update();
+#endif // wxUSE_STREAMS
+
+ // give GTK+ a chance to call GTK_EndProcessDetector here and
+ // also repaint the GUI
wxYield();
+ }
int exitcode = data->exitcode;
return pid;
}
#else // !wxUSE_GUI
- wxASSERT_MSG( sync, wxT("async execution not supported yet") );
+
+ wxASSERT_MSG( flags & wxEXEC_SYNC,
+ wxT("async execution not supported yet") );
int exitcode = 0;
if ( waitpid(pid, &exitcode, 0) == -1 || !WIFEXITED(exitcode) )
return exitcode;
#endif // wxUSE_GUI
}
-#ifdef __VMS
- // VMS does not recognise exit as a return and complains about
- // a missing return
- // I think VMS is wrong in this
- // JJ
- return 0;
-#endif
}
+#undef ERROR_RETURN_CODE
#undef ARGS_CLEANUP
// ----------------------------------------------------------------------------
return FALSE;
}
+#ifndef __WXMAC__
wxString wxGetOsDescription()
{
#ifndef WXWIN_OS_DESCRIPTION
return WXWIN_OS_DESCRIPTION;
#endif
}
+#endif
// this function returns the GUI toolkit version in GUI programs, but OS
// version in non-GUI ones
return -1;
}
+bool wxGetDiskSpace(const wxString& path, wxLongLong *pTotal, wxLongLong *pFree)
+{
+#if defined(HAVE_STATFS) || defined(HAVE_STATVFS)
+ // the case to "char *" is needed for AIX 4.3
+ struct statfs fs;
+ if ( statfs((char *)path.fn_str(), &fs) != 0 )
+ {
+ wxLogSysError("Failed to get file system statistics");
+
+ return FALSE;
+ }
+
+ // under Solaris we might have to use fs.f_frsize instead as I think it
+ // may be a multiple of the block size in general (TODO)
+
+ if ( pTotal )
+ {
+ *pTotal = wxLongLong(fs.f_blocks) * fs.f_bsize;
+ }
+
+ if ( pFree )
+ {
+ *pFree = wxLongLong(fs.f_bavail) * fs.f_bsize;
+ }
+
+ return TRUE;
+#endif // HAVE_STATFS
+
+ return FALSE;
+}
+
// ----------------------------------------------------------------------------
// env vars
// ----------------------------------------------------------------------------
+bool wxGetEnv(const wxString& var, wxString *value)
+{
+ // wxGetenv is defined as getenv()
+ wxChar *p = wxGetenv(var);
+ if ( !p )
+ return FALSE;
+
+ if ( value )
+ {
+ *value = p;
+ }
+
+ return TRUE;
+}
+
bool wxSetEnv(const wxString& variable, const wxChar *value)
{
#if defined(HAVE_SETENV)
- return setenv(variable.mb_str(), value ? wxString(value).mb_str().data()
- : NULL, 1 /* overwrite */) == 0;
+ return setenv(variable.mb_str(),
+ value ? (const char *)wxString(value).mb_str()
+ : NULL,
+ 1 /* overwrite */) == 0;
#elif defined(HAVE_PUTENV)
wxString s = variable;
if ( value )
#include <signal.h>
-static void wxFatalSignalHandler(wxTYPE_SA_HANDLER)
+extern "C" void wxFatalSignalHandler(wxTYPE_SA_HANDLER)
{
if ( wxTheApp )
{
// error and debug output routines (deprecated, use wxLog)
// ----------------------------------------------------------------------------
+#if WXWIN_COMPATIBILITY_2_2
+
void wxDebugMsg( const char *format, ... )
{
va_list ap;
exit(3); // the same exit code as for abort()
}
+#endif // WXWIN_COMPATIBILITY_2_2
+
projects / wxWidgets.git / blobdiff