+ wxGenericListCtrl *parent = m_owner->GetListCtrl();
+
+ wxPaintDC dc( this );
+
+ AdjustDC( dc );
+
+ dc.SetFont( GetFont() );
+
+ // width and height of the entire header window
+ int w, h;
+ GetClientSize( &w, &h );
+ parent->CalcUnscrolledPosition(w, 0, &w, NULL);
+
+ dc.SetBackgroundMode(wxBRUSHSTYLE_TRANSPARENT);
+ dc.SetTextForeground(GetForegroundColour());
+
+ int x = HEADER_OFFSET_X;
+ int numColumns = m_owner->GetColumnCount();
+ wxListItem item;
+ for ( int i = 0; i < numColumns && x < w; i++ )
+ {
+ m_owner->GetColumn( i, item );
+ int wCol = item.m_width;
+
+ int cw = wCol;
+ int ch = h;
+
+ int flags = 0;
+ if (!m_parent->IsEnabled())
+ flags |= wxCONTROL_DISABLED;
+
+// NB: The code below is not really Mac-specific, but since we are close
+// to 2.8 release and I don't have time to test on other platforms, I
+// defined this only for wxMac. If this behavior is desired on
+// other platforms, please go ahead and revise or remove the #ifdef.
+#ifdef __WXMAC__
+ if ( !m_owner->IsVirtual() && (item.m_mask & wxLIST_MASK_STATE) &&
+ (item.m_state & wxLIST_STATE_SELECTED) )
+ flags |= wxCONTROL_SELECTED;
+#endif
+
+ if (i == 0)
+ flags |= wxCONTROL_SPECIAL; // mark as first column
+
+ wxRendererNative::Get().DrawHeaderButton
+ (
+ this,
+ dc,
+ wxRect(x, HEADER_OFFSET_Y, cw, ch),
+ flags
+ );
+
+ // see if we have enough space for the column label
+
+ // for this we need the width of the text
+ wxCoord wLabel;
+ wxCoord hLabel;
+ dc.GetTextExtent(item.GetText(), &wLabel, &hLabel);
+ wLabel += 2 * EXTRA_WIDTH;
+
+ // and the width of the icon, if any
+ int ix = 0, iy = 0; // init them just to suppress the compiler warnings
+ const int image = item.m_image;
+ wxImageList *imageList;
+ if ( image != -1 )
+ {
+ imageList = m_owner->GetSmallImageList();
+ if ( imageList )
+ {
+ imageList->GetSize(image, ix, iy);
+ wLabel += ix + HEADER_IMAGE_MARGIN_IN_REPORT_MODE;
+ }
+ }
+ else
+ {
+ imageList = NULL;
+ }
+
+ // ignore alignment if there is not enough space anyhow
+ int xAligned;
+ switch ( wLabel < cw ? item.GetAlign() : wxLIST_FORMAT_LEFT )
+ {
+ default:
+ wxFAIL_MSG( _T("unknown list item format") );
+ // fall through
+
+ case wxLIST_FORMAT_LEFT:
+ xAligned = x;
+ break;
+
+ case wxLIST_FORMAT_RIGHT:
+ xAligned = x + cw - wLabel;
+ break;
+
+ case wxLIST_FORMAT_CENTER:
+ xAligned = x + (cw - wLabel) / 2;
+ break;
+ }
+
+ // draw the text and image clipping them so that they
+ // don't overwrite the column boundary
+ wxDCClipper clipper(dc, x, HEADER_OFFSET_Y, cw, h - 4 );
+
+ // if we have an image, draw it on the right of the label
+ if ( imageList )
+ {
+ imageList->Draw
+ (
+ image,
+ dc,
+ xAligned + wLabel - ix - HEADER_IMAGE_MARGIN_IN_REPORT_MODE,
+ HEADER_OFFSET_Y + (h - 4 - iy)/2,
+ wxIMAGELIST_DRAW_TRANSPARENT
+ );
+ }
+
+ dc.DrawText( item.GetText(),
+ xAligned + EXTRA_WIDTH, h / 2 - hLabel / 2 ); //HEADER_OFFSET_Y + EXTRA_HEIGHT );
+
+ x += wCol;
+ }
+
+ // Fill in what's missing to the right of the columns, otherwise we will
+ // leave an unpainted area when columns are removed (and it looks better)
+ if ( x < w )
+ {
+ wxRendererNative::Get().DrawHeaderButton
+ (
+ this,
+ dc,
+ wxRect(x, HEADER_OFFSET_Y, w - x, h),
+ wxCONTROL_DIRTY // mark as last column
+ );
+ }
+}
+
+void wxListHeaderWindow::OnInternalIdle()
+{
+ wxWindow::OnInternalIdle();
+
+ if (m_sendSetColumnWidth)
+ {
+ m_owner->SetColumnWidth( m_colToSend, m_widthToSend );
+ m_sendSetColumnWidth = false;
+ }
+}
+
+void wxListHeaderWindow::DrawCurrent()
+{
+#if 1
+ // m_owner->SetColumnWidth( m_column, m_currentX - m_minX );
+ m_sendSetColumnWidth = true;
+ m_colToSend = m_column;
+ m_widthToSend = m_currentX - m_minX;
+#else
+ int x1 = m_currentX;
+ int y1 = 0;
+ m_owner->ClientToScreen( &x1, &y1 );
+
+ int x2 = m_currentX;
+ int y2 = 0;
+ m_owner->GetClientSize( NULL, &y2 );
+ m_owner->ClientToScreen( &x2, &y2 );
+
+ wxScreenDC dc;
+ dc.SetLogicalFunction( wxINVERT );
+ dc.SetPen( wxPen(*wxBLACK, 2) );
+ dc.SetBrush( *wxTRANSPARENT_BRUSH );
+
+ AdjustDC(dc);
+
+ dc.DrawLine( x1, y1, x2, y2 );
+
+ dc.SetLogicalFunction( wxCOPY );
+
+ dc.SetPen( wxNullPen );
+ dc.SetBrush( wxNullBrush );
+#endif
+}
+
+void wxListHeaderWindow::OnMouse( wxMouseEvent &event )
+{
+ wxGenericListCtrl *parent = m_owner->GetListCtrl();
+
+ // we want to work with logical coords
+ int x;
+ parent->CalcUnscrolledPosition(event.GetX(), 0, &x, NULL);
+ int y = event.GetY();
+
+ if (m_isDragging)
+ {
+ SendListEvent(wxEVT_COMMAND_LIST_COL_DRAGGING, event.GetPosition());
+
+ // we don't draw the line beyond our window, but we allow dragging it
+ // there
+ int w = 0;
+ GetClientSize( &w, NULL );
+ parent->CalcUnscrolledPosition(w, 0, &w, NULL);
+ w -= 6;
+
+ // erase the line if it was drawn
+ if ( m_currentX < w )
+ DrawCurrent();
+
+ if (event.ButtonUp())
+ {
+ ReleaseMouse();
+ m_isDragging = false;
+ m_dirty = true;
+ m_owner->SetColumnWidth( m_column, m_currentX - m_minX );
+ SendListEvent(wxEVT_COMMAND_LIST_COL_END_DRAG, event.GetPosition());
+ }
+ else
+ {
+ if (x > m_minX + 7)
+ m_currentX = x;
+ else
+ m_currentX = m_minX + 7;
+
+ // draw in the new location
+ if ( m_currentX < w )
+ DrawCurrent();
+ }
+ }
+ else // not dragging
+ {
+ m_minX = 0;
+ bool hit_border = false;
+
+ // end of the current column
+ int xpos = 0;
+
+ // find the column where this event occurred
+ int col,
+ countCol = m_owner->GetColumnCount();
+ for (col = 0; col < countCol; col++)
+ {
+ xpos += m_owner->GetColumnWidth( col );
+ m_column = col;
+
+ if ( (abs(x-xpos) < 3) && (y < 22) )
+ {
+ // near the column border
+ hit_border = true;
+ break;
+ }
+
+ if ( x < xpos )
+ {
+ // inside the column
+ break;
+ }
+
+ m_minX = xpos;
+ }
+
+ if ( col == countCol )
+ m_column = -1;
+
+ if (event.LeftDown() || event.RightUp())
+ {
+ if (hit_border && event.LeftDown())
+ {
+ if ( SendListEvent(wxEVT_COMMAND_LIST_COL_BEGIN_DRAG,
+ event.GetPosition()) )
+ {
+ m_isDragging = true;
+ m_currentX = x;
+ CaptureMouse();
+ DrawCurrent();
+ }
+ //else: column resizing was vetoed by the user code
+ }
+ else // click on a column
+ {
+ // record the selected state of the columns
+ if (event.LeftDown())
+ {
+ for (int i=0; i < m_owner->GetColumnCount(); i++)
+ {
+ wxListItem colItem;
+ m_owner->GetColumn(i, colItem);
+ long state = colItem.GetState();
+ if (i == m_column)
+ colItem.SetState(state | wxLIST_STATE_SELECTED);
+ else
+ colItem.SetState(state & ~wxLIST_STATE_SELECTED);
+ m_owner->SetColumn(i, colItem);
+ }
+ }
+
+ SendListEvent( event.LeftDown()
+ ? wxEVT_COMMAND_LIST_COL_CLICK
+ : wxEVT_COMMAND_LIST_COL_RIGHT_CLICK,
+ event.GetPosition());
+ }
+ }
+ else if (event.Moving())
+ {
+ bool setCursor;
+ if (hit_border)
+ {
+ setCursor = m_currentCursor == wxSTANDARD_CURSOR;
+ m_currentCursor = m_resizeCursor;
+ }
+ else
+ {
+ setCursor = m_currentCursor != wxSTANDARD_CURSOR;
+ m_currentCursor = wxSTANDARD_CURSOR;
+ }
+
+ if ( setCursor )
+ SetCursor(*m_currentCursor);
+ }
+ }
+}
+
+void wxListHeaderWindow::OnSetFocus( wxFocusEvent &WXUNUSED(event) )
+{
+ m_owner->SetFocus();
+ m_owner->Update();
+}
+
+bool wxListHeaderWindow::SendListEvent(wxEventType type, const wxPoint& pos)
+{
+ wxWindow *parent = GetParent();
+ wxListEvent le( type, parent->GetId() );
+ le.SetEventObject( parent );
+ le.m_pointDrag = pos;
+
+ // the position should be relative to the parent window, not
+ // this one for compatibility with MSW and common sense: the
+ // user code doesn't know anything at all about this header
+ // window, so why should it get positions relative to it?
+ le.m_pointDrag.y -= GetSize().y;
+
+ le.m_col = m_column;
+ return !parent->GetEventHandler()->ProcessEvent( le ) || le.IsAllowed();
+}
+
+//-----------------------------------------------------------------------------
+// wxListRenameTimer (internal)
+//-----------------------------------------------------------------------------
+
+wxListRenameTimer::wxListRenameTimer( wxListMainWindow *owner )
+{
+ m_owner = owner;
+}
+
+void wxListRenameTimer::Notify()
+{
+ m_owner->OnRenameTimer();
+}
+
+//-----------------------------------------------------------------------------
+// wxListTextCtrlWrapper (internal)
+//-----------------------------------------------------------------------------
+
+BEGIN_EVENT_TABLE(wxListTextCtrlWrapper, wxEvtHandler)
+ EVT_CHAR (wxListTextCtrlWrapper::OnChar)
+ EVT_KEY_UP (wxListTextCtrlWrapper::OnKeyUp)
+ EVT_KILL_FOCUS (wxListTextCtrlWrapper::OnKillFocus)
+END_EVENT_TABLE()
+
+wxListTextCtrlWrapper::wxListTextCtrlWrapper(wxListMainWindow *owner,
+ wxTextCtrl *text,
+ size_t itemEdit)
+ : m_startValue(owner->GetItemText(itemEdit)),
+ m_itemEdited(itemEdit)
+{
+ m_owner = owner;
+ m_text = text;
+ m_aboutToFinish = false;
+
+ wxGenericListCtrl *parent = m_owner->GetListCtrl();
+
+ wxRect rectLabel = owner->GetLineLabelRect(itemEdit);
+
+ parent->CalcScrolledPosition(rectLabel.x, rectLabel.y,
+ &rectLabel.x, &rectLabel.y);
+
+ m_text->Create(owner, wxID_ANY, m_startValue,
+ wxPoint(rectLabel.x-4,rectLabel.y-4),
+ wxSize(rectLabel.width+11,rectLabel.height+8));
+ m_text->SetFocus();
+
+ m_text->PushEventHandler(this);
+}
+
+void wxListTextCtrlWrapper::EndEdit(bool discardChanges)
+{
+ m_aboutToFinish = true;
+
+ if ( discardChanges )
+ {
+ m_owner->OnRenameCancelled(m_itemEdited);
+
+ Finish( true );
+ }
+ else
+ {
+ // Notify the owner about the changes
+ AcceptChanges();
+
+ // Even if vetoed, close the control (consistent with MSW)
+ Finish( true );
+ }
+}
+
+void wxListTextCtrlWrapper::Finish( bool setfocus )
+{
+ m_text->RemoveEventHandler(this);
+ m_owner->ResetTextControl( m_text );
+
+ wxPendingDelete.Append( this );
+
+ if (setfocus)
+ m_owner->SetFocus();
+}
+
+bool wxListTextCtrlWrapper::AcceptChanges()
+{
+ const wxString value = m_text->GetValue();
+
+ // notice that we should always call OnRenameAccept() to generate the "end
+ // label editing" event, even if the user hasn't really changed anything
+ if ( !m_owner->OnRenameAccept(m_itemEdited, value) )
+ {
+ // vetoed by the user
+ return false;
+ }
+
+ // accepted, do rename the item (unless nothing changed)
+ if ( value != m_startValue )
+ m_owner->SetItemText(m_itemEdited, value);
+
+ return true;
+}
+
+void wxListTextCtrlWrapper::OnChar( wxKeyEvent &event )
+{
+ switch ( event.m_keyCode )
+ {
+ case WXK_RETURN:
+ EndEdit( false );
+ break;
+
+ case WXK_ESCAPE:
+ EndEdit( true );
+ break;
+
+ default:
+ event.Skip();
+ }
+}
+
+void wxListTextCtrlWrapper::OnKeyUp( wxKeyEvent &event )
+{
+ if (m_aboutToFinish)
+ {
+ // auto-grow the textctrl:
+ wxSize parentSize = m_owner->GetSize();
+ wxPoint myPos = m_text->GetPosition();
+ wxSize mySize = m_text->GetSize();
+ int sx, sy;
+ m_text->GetTextExtent(m_text->GetValue() + _T("MM"), &sx, &sy);
+ if (myPos.x + sx > parentSize.x)
+ sx = parentSize.x - myPos.x;
+ if (mySize.x > sx)
+ sx = mySize.x;
+ m_text->SetSize(sx, wxDefaultCoord);
+ }
+
+ event.Skip();
+}
+
+void wxListTextCtrlWrapper::OnKillFocus( wxFocusEvent &event )
+{
+ if ( !m_aboutToFinish )
+ {
+ if ( !AcceptChanges() )
+ m_owner->OnRenameCancelled( m_itemEdited );
+
+ Finish( false );
+ }
+
+ // We must let the native text control handle focus
+ event.Skip();
+}
+
+//-----------------------------------------------------------------------------
+// wxListMainWindow
+//-----------------------------------------------------------------------------
+
+BEGIN_EVENT_TABLE(wxListMainWindow, wxWindow)
+ EVT_PAINT (wxListMainWindow::OnPaint)
+ EVT_MOUSE_EVENTS (wxListMainWindow::OnMouse)
+ EVT_CHAR (wxListMainWindow::OnChar)
+ EVT_KEY_DOWN (wxListMainWindow::OnKeyDown)
+ EVT_KEY_UP (wxListMainWindow::OnKeyUp)
+ EVT_SET_FOCUS (wxListMainWindow::OnSetFocus)
+ EVT_KILL_FOCUS (wxListMainWindow::OnKillFocus)
+ EVT_SCROLLWIN (wxListMainWindow::OnScroll)
+ EVT_CHILD_FOCUS (wxListMainWindow::OnChildFocus)
+END_EVENT_TABLE()
+
+void wxListMainWindow::Init()
+{
+ m_dirty = true;
+ m_countVirt = 0;
+ m_lineFrom =
+ m_lineTo = (size_t)-1;
+ m_linesPerPage = 0;
+
+ m_headerWidth =
+ m_lineHeight = 0;
+
+ m_small_image_list = NULL;
+ m_normal_image_list = NULL;
+
+ m_small_spacing = 30;
+ m_normal_spacing = 40;
+
+ m_hasFocus = false;
+ m_dragCount = 0;
+ m_isCreated = false;
+
+ m_lastOnSame = false;
+ m_renameTimer = new wxListRenameTimer( this );
+ m_textctrlWrapper = NULL;
+
+ m_current =
+ m_lineLastClicked =
+ m_lineSelectSingleOnUp =
+ m_lineBeforeLastClicked = (size_t)-1;
+}
+
+wxListMainWindow::wxListMainWindow()
+{
+ Init();
+
+ m_highlightBrush =
+ m_highlightUnfocusedBrush = NULL;
+}
+
+wxListMainWindow::wxListMainWindow( wxWindow *parent,
+ wxWindowID id,
+ const wxPoint& pos,
+ const wxSize& size,
+ long style,
+ const wxString &name )
+ : wxWindow( parent, id, pos, size, style, name )
+{
+ Init();
+
+ m_highlightBrush = new wxBrush
+ (
+ wxSystemSettings::GetColour
+ (
+ wxSYS_COLOUR_HIGHLIGHT
+ ),
+ wxBRUSHSTYLE_SOLID
+ );
+
+ m_highlightUnfocusedBrush = new wxBrush
+ (
+ wxSystemSettings::GetColour
+ (
+ wxSYS_COLOUR_BTNSHADOW
+ ),
+ wxBRUSHSTYLE_SOLID
+ );
+
+ wxVisualAttributes attr = wxGenericListCtrl::GetClassDefaultAttributes();
+ SetOwnForegroundColour( attr.colFg );
+ SetOwnBackgroundColour( attr.colBg );
+ if (!m_hasFont)
+ SetOwnFont( attr.font );
+}
+
+wxListMainWindow::~wxListMainWindow()
+{
+ DoDeleteAllItems();
+ WX_CLEAR_LIST(wxListHeaderDataList, m_columns);
+ WX_CLEAR_ARRAY(m_aColWidths);
+
+ delete m_highlightBrush;
+ delete m_highlightUnfocusedBrush;
+ delete m_renameTimer;
+}
+
+void wxListMainWindow::CacheLineData(size_t line)
+{
+ wxGenericListCtrl *listctrl = GetListCtrl();
+
+ wxListLineData *ld = GetDummyLine();
+
+ size_t countCol = GetColumnCount();
+ for ( size_t col = 0; col < countCol; col++ )
+ {
+ ld->SetText(col, listctrl->OnGetItemText(line, col));
+ ld->SetImage(col, listctrl->OnGetItemColumnImage(line, col));
+ }
+
+ ld->SetAttr(listctrl->OnGetItemAttr(line));
+}
+
+wxListLineData *wxListMainWindow::GetDummyLine() const
+{
+ wxASSERT_MSG( !IsEmpty(), _T("invalid line index") );
+ wxASSERT_MSG( IsVirtual(), _T("GetDummyLine() shouldn't be called") );
+
+ wxListMainWindow *self = wxConstCast(this, wxListMainWindow);
+
+ // we need to recreate the dummy line if the number of columns in the
+ // control changed as it would have the incorrect number of fields
+ // otherwise
+ if ( !m_lines.IsEmpty() &&
+ m_lines[0].m_items.GetCount() != (size_t)GetColumnCount() )
+ {
+ self->m_lines.Clear();
+ }
+
+ if ( m_lines.IsEmpty() )
+ {
+ wxListLineData *line = new wxListLineData(self);
+ self->m_lines.Add(line);
+
+ // don't waste extra memory -- there never going to be anything
+ // else/more in this array
+ self->m_lines.Shrink();
+ }
+
+ return &m_lines[0];
+}
+
+// ----------------------------------------------------------------------------
+// line geometry (report mode only)
+// ----------------------------------------------------------------------------
+
+wxCoord wxListMainWindow::GetLineHeight() const
+{
+ // we cache the line height as calling GetTextExtent() is slow
+ if ( !m_lineHeight )
+ {
+ wxListMainWindow *self = wxConstCast(this, wxListMainWindow);
+
+ wxClientDC dc( self );
+ dc.SetFont( GetFont() );
+
+ wxCoord y;
+ dc.GetTextExtent(_T("H"), NULL, &y);
+
+ if ( m_small_image_list && m_small_image_list->GetImageCount() )
+ {
+ int iw = 0, ih = 0;
+ m_small_image_list->GetSize(0, iw, ih);
+ y = wxMax(y, ih);
+ }
+
+ y += EXTRA_HEIGHT;
+ self->m_lineHeight = y + LINE_SPACING;
+ }
+
+ return m_lineHeight;
+}
+
+wxCoord wxListMainWindow::GetLineY(size_t line) const
+{
+ wxASSERT_MSG( InReportView(), _T("only works in report mode") );
+
+ return LINE_SPACING + line * GetLineHeight();
+}
+
+wxRect wxListMainWindow::GetLineRect(size_t line) const
+{
+ if ( !InReportView() )
+ return GetLine(line)->m_gi->m_rectAll;
+
+ wxRect rect;
+ rect.x = HEADER_OFFSET_X;
+ rect.y = GetLineY(line);
+ rect.width = GetHeaderWidth();
+ rect.height = GetLineHeight();
+
+ return rect;
+}
+
+wxRect wxListMainWindow::GetLineLabelRect(size_t line) const
+{
+ if ( !InReportView() )
+ return GetLine(line)->m_gi->m_rectLabel;
+
+ int image_x = 0;
+ wxListLineData *data = GetLine(line);
+ wxListItemDataList::compatibility_iterator node = data->m_items.GetFirst();
+ if (node)
+ {
+ wxListItemData *item = node->GetData();
+ if ( item->HasImage() )
+ {
+ int ix, iy;
+ GetImageSize( item->GetImage(), ix, iy );
+ image_x = 3 + ix + IMAGE_MARGIN_IN_REPORT_MODE;
+ }
+ }
+
+ wxRect rect;
+ rect.x = image_x + HEADER_OFFSET_X;
+ rect.y = GetLineY(line);
+ rect.width = GetColumnWidth(0) - image_x;
+ rect.height = GetLineHeight();
+
+ return rect;
+}
+
+wxRect wxListMainWindow::GetLineIconRect(size_t line) const
+{
+ if ( !InReportView() )
+ return GetLine(line)->m_gi->m_rectIcon;
+
+ wxListLineData *ld = GetLine(line);
+ wxASSERT_MSG( ld->HasImage(), _T("should have an image") );
+
+ wxRect rect;
+ rect.x = HEADER_OFFSET_X;
+ rect.y = GetLineY(line);
+ GetImageSize(ld->GetImage(), rect.width, rect.height);
+
+ return rect;
+}
+
+wxRect wxListMainWindow::GetLineHighlightRect(size_t line) const
+{
+ return InReportView() ? GetLineRect(line)
+ : GetLine(line)->m_gi->m_rectHighlight;
+}
+
+long wxListMainWindow::HitTestLine(size_t line, int x, int y) const
+{
+ wxASSERT_MSG( line < GetItemCount(), _T("invalid line in HitTestLine") );
+
+ wxListLineData *ld = GetLine(line);
+
+ if ( ld->HasImage() && GetLineIconRect(line).Contains(x, y) )
+ return wxLIST_HITTEST_ONITEMICON;
+
+ // VS: Testing for "ld->HasText() || InReportView()" instead of
+ // "ld->HasText()" is needed to make empty lines in report view
+ // possible
+ if ( ld->HasText() || InReportView() )
+ {
+ wxRect rect = InReportView() ? GetLineRect(line)
+ : GetLineLabelRect(line);
+
+ if ( rect.Contains(x, y) )
+ return wxLIST_HITTEST_ONITEMLABEL;
+ }
+
+ return 0;
+}
+
+// ----------------------------------------------------------------------------
+// highlight (selection) handling
+// ----------------------------------------------------------------------------
+
+bool wxListMainWindow::IsHighlighted(size_t line) const
+{
+ if ( IsVirtual() )
+ {
+ return m_selStore.IsSelected(line);
+ }
+ else // !virtual
+ {
+ wxListLineData *ld = GetLine(line);
+ wxCHECK_MSG( ld, false, _T("invalid index in IsHighlighted") );
+
+ return ld->IsHighlighted();
+ }
+}
+
+void wxListMainWindow::HighlightLines( size_t lineFrom,
+ size_t lineTo,
+ bool highlight )
+{
+ if ( IsVirtual() )
+ {
+ wxArrayInt linesChanged;
+ if ( !m_selStore.SelectRange(lineFrom, lineTo, highlight,
+ &linesChanged) )
+ {
+ // meny items changed state, refresh everything
+ RefreshLines(lineFrom, lineTo);
+ }
+ else // only a few items changed state, refresh only them
+ {
+ size_t count = linesChanged.GetCount();
+ for ( size_t n = 0; n < count; n++ )
+ {
+ RefreshLine(linesChanged[n]);
+ }
+ }
+ }
+ else // iterate over all items in non report view
+ {
+ for ( size_t line = lineFrom; line <= lineTo; line++ )
+ {
+ if ( HighlightLine(line, highlight) )
+ RefreshLine(line);
+ }
+ }
+}
+
+bool wxListMainWindow::HighlightLine( size_t line, bool highlight )
+{
+ bool changed;
+
+ if ( IsVirtual() )
+ {
+ changed = m_selStore.SelectItem(line, highlight);
+ }
+ else // !virtual
+ {
+ wxListLineData *ld = GetLine(line);
+ wxCHECK_MSG( ld, false, _T("invalid index in HighlightLine") );
+
+ changed = ld->Highlight(highlight);
+ }
+
+ if ( changed )
+ {
+ SendNotify( line, highlight ? wxEVT_COMMAND_LIST_ITEM_SELECTED
+ : wxEVT_COMMAND_LIST_ITEM_DESELECTED );
+ }
+
+ return changed;
+}
+
+void wxListMainWindow::RefreshLine( size_t line )
+{
+ if ( InReportView() )
+ {
+ size_t visibleFrom, visibleTo;
+ GetVisibleLinesRange(&visibleFrom, &visibleTo);
+
+ if ( line < visibleFrom || line > visibleTo )
+ return;
+ }
+
+ wxRect rect = GetLineRect(line);
+
+ GetListCtrl()->CalcScrolledPosition( rect.x, rect.y, &rect.x, &rect.y );
+ RefreshRect( rect );
+}
+
+void wxListMainWindow::RefreshLines( size_t lineFrom, size_t lineTo )
+{
+ // we suppose that they are ordered by caller
+ wxASSERT_MSG( lineFrom <= lineTo, _T("indices in disorder") );
+
+ wxASSERT_MSG( lineTo < GetItemCount(), _T("invalid line range") );
+
+ if ( InReportView() )
+ {
+ size_t visibleFrom, visibleTo;
+ GetVisibleLinesRange(&visibleFrom, &visibleTo);
+
+ if ( lineFrom < visibleFrom )
+ lineFrom = visibleFrom;
+ if ( lineTo > visibleTo )
+ lineTo = visibleTo;
+
+ wxRect rect;
+ rect.x = 0;
+ rect.y = GetLineY(lineFrom);
+ rect.width = GetClientSize().x;
+ rect.height = GetLineY(lineTo) - rect.y + GetLineHeight();
+
+ GetListCtrl()->CalcScrolledPosition( rect.x, rect.y, &rect.x, &rect.y );
+ RefreshRect( rect );
+ }
+ else // !report
+ {
+ // TODO: this should be optimized...
+ for ( size_t line = lineFrom; line <= lineTo; line++ )
+ {
+ RefreshLine(line);
+ }
+ }
+}
+
+void wxListMainWindow::RefreshAfter( size_t lineFrom )
+{
+ if ( InReportView() )
+ {
+ size_t visibleFrom, visibleTo;
+ GetVisibleLinesRange(&visibleFrom, &visibleTo);
+
+ if ( lineFrom < visibleFrom )
+ lineFrom = visibleFrom;
+ else if ( lineFrom > visibleTo )
+ return;
+
+ wxRect rect;
+ rect.x = 0;
+ rect.y = GetLineY(lineFrom);
+ GetListCtrl()->CalcScrolledPosition( rect.x, rect.y, &rect.x, &rect.y );
+
+ wxSize size = GetClientSize();
+ rect.width = size.x;
+
+ // refresh till the bottom of the window
+ rect.height = size.y - rect.y;
+
+ RefreshRect( rect );
+ }
+ else // !report
+ {
+ // TODO: how to do it more efficiently?
+ m_dirty = true;
+ }
+}
+
+void wxListMainWindow::RefreshSelected()
+{
+ if ( IsEmpty() )
+ return;
+
+ size_t from, to;
+ if ( InReportView() )
+ {
+ GetVisibleLinesRange(&from, &to);
+ }
+ else // !virtual
+ {
+ from = 0;
+ to = GetItemCount() - 1;
+ }
+
+ if ( HasCurrent() && m_current >= from && m_current <= to )
+ RefreshLine(m_current);
+
+ for ( size_t line = from; line <= to; line++ )
+ {
+ // NB: the test works as expected even if m_current == -1
+ if ( line != m_current && IsHighlighted(line) )
+ RefreshLine(line);
+ }
+}
+
+void wxListMainWindow::OnPaint( wxPaintEvent &WXUNUSED(event) )
+{
+ // Note: a wxPaintDC must be constructed even if no drawing is
+ // done (a Windows requirement).
+ wxPaintDC dc( this );
+
+ if ( IsEmpty() )
+ {
+ // nothing to draw or not the moment to draw it
+ return;
+ }
+
+ if ( m_dirty )
+ RecalculatePositions( false );
+
+ GetListCtrl()->PrepareDC( dc );
+
+ int dev_x, dev_y;
+ GetListCtrl()->CalcScrolledPosition( 0, 0, &dev_x, &dev_y );
+
+ dc.SetFont( GetFont() );
+
+ if ( InReportView() )
+ {
+ int lineHeight = GetLineHeight();
+
+ size_t visibleFrom, visibleTo;
+ GetVisibleLinesRange(&visibleFrom, &visibleTo);
+
+ wxRect rectLine;
+ int xOrig = dc.LogicalToDeviceX( 0 );
+ int yOrig = dc.LogicalToDeviceY( 0 );
+
+ // tell the caller cache to cache the data
+ if ( IsVirtual() )
+ {
+ wxListEvent evCache(wxEVT_COMMAND_LIST_CACHE_HINT,
+ GetParent()->GetId());
+ evCache.SetEventObject( GetParent() );
+ evCache.m_oldItemIndex = visibleFrom;
+ evCache.m_itemIndex = visibleTo;
+ GetParent()->GetEventHandler()->ProcessEvent( evCache );
+ }
+
+ for ( size_t line = visibleFrom; line <= visibleTo; line++ )
+ {
+ rectLine = GetLineRect(line);
+
+
+ if ( !IsExposed(rectLine.x + xOrig, rectLine.y + yOrig,
+ rectLine.width, rectLine.height) )
+ {
+ // don't redraw unaffected lines to avoid flicker
+ continue;
+ }
+
+ GetLine(line)->DrawInReportMode( &dc,
+ rectLine,
+ GetLineHighlightRect(line),
+ IsHighlighted(line),
+ line == m_current );
+ }
+
+ if ( HasFlag(wxLC_HRULES) )
+ {
+ wxPen pen(GetRuleColour(), 1, wxPENSTYLE_SOLID);
+ wxSize clientSize = GetClientSize();
+
+ size_t i = visibleFrom;
+ if (i == 0) i = 1; // Don't draw the first one
+ for ( ; i <= visibleTo; i++ )
+ {
+ dc.SetPen(pen);
+ dc.SetBrush( *wxTRANSPARENT_BRUSH );
+ dc.DrawLine(0 - dev_x, i * lineHeight,
+ clientSize.x - dev_x, i * lineHeight);
+ }
+
+ // Draw last horizontal rule
+ if ( visibleTo == GetItemCount() - 1 )
+ {
+ dc.SetPen( pen );
+ dc.SetBrush( *wxTRANSPARENT_BRUSH );
+ dc.DrawLine(0 - dev_x, (m_lineTo + 1) * lineHeight,
+ clientSize.x - dev_x , (m_lineTo + 1) * lineHeight );
+ }
+ }
+
+ // Draw vertical rules if required
+ if ( HasFlag(wxLC_VRULES) && !IsEmpty() )
+ {
+ wxPen pen(GetRuleColour(), 1, wxPENSTYLE_SOLID);
+ wxRect firstItemRect, lastItemRect;
+
+ GetItemRect(visibleFrom, firstItemRect);
+ GetItemRect(visibleTo, lastItemRect);
+ int x = firstItemRect.GetX();
+ dc.SetPen(pen);
+ dc.SetBrush(* wxTRANSPARENT_BRUSH);
+
+ for (int col = 0; col < GetColumnCount(); col++)
+ {
+ int colWidth = GetColumnWidth(col);
+ x += colWidth;
+ int x_pos = x - dev_x;
+ if (col < GetColumnCount()-1) x_pos -= 2;
+ dc.DrawLine(x_pos, firstItemRect.GetY() - 1 - dev_y,
+ x_pos, lastItemRect.GetBottom() + 1 - dev_y);
+ }
+ }
+ }
+ else // !report
+ {
+ size_t count = GetItemCount();
+ for ( size_t i = 0; i < count; i++ )
+ {
+ GetLine(i)->Draw( &dc );
+ }
+ }
+
+#if !defined( __WXMAC__) && !defined(__WXGTK20__)
+ // Don't draw rect outline under Mac at all.
+ // Draw it elsewhere under GTK.
+ if ( HasCurrent() )
+ {
+ if ( m_hasFocus )
+ {
+ wxRect rect( GetLineHighlightRect( m_current ) );
+ dc.SetPen( *wxBLACK_PEN );
+ dc.SetBrush( *wxTRANSPARENT_BRUSH );
+ dc.DrawRectangle( rect );
+ }
+ }
+#endif
+}
+
+void wxListMainWindow::HighlightAll( bool on )
+{
+ if ( IsSingleSel() )
+ {
+ wxASSERT_MSG( !on, _T("can't do this in a single selection control") );
+
+ // we just have one item to turn off
+ if ( HasCurrent() && IsHighlighted(m_current) )
+ {
+ HighlightLine(m_current, false);
+ RefreshLine(m_current);
+ }
+ }
+ else // multi selection
+ {
+ if ( !IsEmpty() )
+ HighlightLines(0, GetItemCount() - 1, on);
+ }
+}
+
+void wxListMainWindow::OnChildFocus(wxChildFocusEvent& WXUNUSED(event))
+{
+ // Do nothing here. This prevents the default handler in wxScrolledWindow
+ // from needlessly scrolling the window when the edit control is
+ // dismissed. See ticket #9563.
+}
+
+void wxListMainWindow::SendNotify( size_t line,
+ wxEventType command,
+ const wxPoint& point )
+{
+ wxListEvent le( command, GetParent()->GetId() );
+ le.SetEventObject( GetParent() );
+
+ le.m_itemIndex = line;
+
+ // set only for events which have position
+ if ( point != wxDefaultPosition )
+ le.m_pointDrag = point;
+
+ // don't try to get the line info for virtual list controls: the main
+ // program has it anyhow and if we did it would result in accessing all
+ // the lines, even those which are not visible now and this is precisely
+ // what we're trying to avoid
+ if ( !IsVirtual() )
+ {
+ if ( line != (size_t)-1 )
+ {
+ GetLine(line)->GetItem( 0, le.m_item );
+ }
+ //else: this happens for wxEVT_COMMAND_LIST_ITEM_FOCUSED event
+ }
+ //else: there may be no more such item
+
+ GetParent()->GetEventHandler()->ProcessEvent( le );
+}
+
+void wxListMainWindow::ChangeCurrent(size_t current)
+{
+ m_current = current;
+
+ // as the current item changed, we shouldn't start editing it when the
+ // "slow click" timer expires as the click happened on another item
+ if ( m_renameTimer->IsRunning() )
+ m_renameTimer->Stop();
+
+ SendNotify(current, wxEVT_COMMAND_LIST_ITEM_FOCUSED);
+}
+
+wxTextCtrl *wxListMainWindow::EditLabel(long item, wxClassInfo* textControlClass)
+{
+ wxCHECK_MSG( (item >= 0) && ((size_t)item < GetItemCount()), NULL,
+ wxT("wrong index in wxGenericListCtrl::EditLabel()") );
+
+ wxASSERT_MSG( textControlClass->IsKindOf(CLASSINFO(wxTextCtrl)),
+ wxT("EditLabel() needs a text control") );
+
+ size_t itemEdit = (size_t)item;
+
+ wxListEvent le( wxEVT_COMMAND_LIST_BEGIN_LABEL_EDIT, GetParent()->GetId() );
+ le.SetEventObject( GetParent() );
+ le.m_itemIndex = item;
+ wxListLineData *data = GetLine(itemEdit);
+ wxCHECK_MSG( data, NULL, _T("invalid index in EditLabel()") );
+ data->GetItem( 0, le.m_item );
+
+ if ( GetParent()->GetEventHandler()->ProcessEvent( le ) && !le.IsAllowed() )
+ {
+ // vetoed by user code
+ return NULL;
+ }
+
+ // We have to call this here because the label in question might just have
+ // been added and no screen update taken place.
+ if ( m_dirty )
+ {
+ // TODO: use wxTheApp->SafeYieldFor(NULL, wxEVT_CATEGORY_UI) instead
+ // so that no pending events may change the item count (see below)
+ // IMPORTANT: needs to be tested!
+ wxSafeYield();
+
+ // Pending events dispatched by wxSafeYield might have changed the item
+ // count
+ if ( (size_t)item >= GetItemCount() )
+ return NULL;
+ }
+
+ wxTextCtrl * const text = (wxTextCtrl *)textControlClass->CreateObject();
+ m_textctrlWrapper = new wxListTextCtrlWrapper(this, text, item);
+ return m_textctrlWrapper->GetText();
+}
+
+void wxListMainWindow::OnRenameTimer()
+{
+ wxCHECK_RET( HasCurrent(), wxT("unexpected rename timer") );
+
+ EditLabel( m_current );
+}
+
+bool wxListMainWindow::OnRenameAccept(size_t itemEdit, const wxString& value)
+{
+ wxListEvent le( wxEVT_COMMAND_LIST_END_LABEL_EDIT, GetParent()->GetId() );
+ le.SetEventObject( GetParent() );
+ le.m_itemIndex = itemEdit;
+
+ wxListLineData *data = GetLine(itemEdit);
+
+ wxCHECK_MSG( data, false, _T("invalid index in OnRenameAccept()") );
+
+ data->GetItem( 0, le.m_item );
+ le.m_item.m_text = value;
+ return !GetParent()->GetEventHandler()->ProcessEvent( le ) ||
+ le.IsAllowed();
+}
+
+void wxListMainWindow::OnRenameCancelled(size_t itemEdit)
+{
+ // let owner know that the edit was cancelled
+ wxListEvent le( wxEVT_COMMAND_LIST_END_LABEL_EDIT, GetParent()->GetId() );
+
+ le.SetEditCanceled(true);
+
+ le.SetEventObject( GetParent() );
+ le.m_itemIndex = itemEdit;
+
+ wxListLineData *data = GetLine(itemEdit);
+ wxCHECK_RET( data, _T("invalid index in OnRenameCancelled()") );
+
+ data->GetItem( 0, le.m_item );
+ GetEventHandler()->ProcessEvent( le );
+}
+
+void wxListMainWindow::OnMouse( wxMouseEvent &event )
+{
+#ifdef __WXMAC__
+ // On wxMac we can't depend on the EVT_KILL_FOCUS event to properly
+ // shutdown the edit control when the mouse is clicked elsewhere on the
+ // listctrl because the order of events is different (or something like
+ // that), so explicitly end the edit if it is active.
+ if ( event.LeftDown() && m_textctrlWrapper )
+ m_textctrlWrapper->EndEdit( false );
+#endif // __WXMAC__
+
+ if ( event.LeftDown() )
+ SetFocus();
+
+ event.SetEventObject( GetParent() );
+ if ( GetParent()->GetEventHandler()->ProcessEvent( event) )
+ return;
+
+ if (event.GetEventType() == wxEVT_MOUSEWHEEL)
+ {
+ // let the base class handle mouse wheel events.
+ event.Skip();
+ return;
+ }
+
+ if ( !HasCurrent() || IsEmpty() )
+ {
+ if (event.RightDown())
+ {
+ SendNotify( (size_t)-1, wxEVT_COMMAND_LIST_ITEM_RIGHT_CLICK, event.GetPosition() );
+
+ wxContextMenuEvent evtCtx(wxEVT_CONTEXT_MENU,
+ GetParent()->GetId(),
+ ClientToScreen(event.GetPosition()));
+ evtCtx.SetEventObject(GetParent());
+ GetParent()->GetEventHandler()->ProcessEvent(evtCtx);
+ }
+ return;
+ }
+
+ if (m_dirty)
+ return;
+
+ if ( !(event.Dragging() || event.ButtonDown() || event.LeftUp() ||
+ event.ButtonDClick()) )
+ return;
+
+ int x = event.GetX();
+ int y = event.GetY();
+ GetListCtrl()->CalcUnscrolledPosition( x, y, &x, &y );
+
+ // where did we hit it (if we did)?
+ long hitResult = 0;
+
+ size_t count = GetItemCount(),
+ current;
+
+ if ( InReportView() )
+ {
+ current = y / GetLineHeight();
+ if ( current < count )
+ hitResult = HitTestLine(current, x, y);
+ }
+ else // !report
+ {
+ // TODO: optimize it too! this is less simple than for report view but
+ // enumerating all items is still not a way to do it!!
+ for ( current = 0; current < count; current++ )
+ {
+ hitResult = HitTestLine(current, x, y);
+ if ( hitResult )
+ break;
+ }
+ }
+
+ if (event.Dragging())
+ {
+ if (m_dragCount == 0)
+ {
+ // we have to report the raw, physical coords as we want to be
+ // able to call HitTest(event.m_pointDrag) from the user code to
+ // get the item being dragged
+ m_dragStart = event.GetPosition();
+ }
+
+ m_dragCount++;
+
+ if (m_dragCount != 3)
+ return;
+
+ int command = event.RightIsDown() ? wxEVT_COMMAND_LIST_BEGIN_RDRAG
+ : wxEVT_COMMAND_LIST_BEGIN_DRAG;
+
+ wxListEvent le( command, GetParent()->GetId() );
+ le.SetEventObject( GetParent() );
+ le.m_itemIndex = m_lineLastClicked;
+ le.m_pointDrag = m_dragStart;
+ GetParent()->GetEventHandler()->ProcessEvent( le );
+
+ return;
+ }
+ else
+ {
+ m_dragCount = 0;
+ }
+
+ if ( !hitResult )
+ {
+ // outside of any item
+ if (event.RightDown())
+ {
+ SendNotify( (size_t) -1, wxEVT_COMMAND_LIST_ITEM_RIGHT_CLICK, event.GetPosition() );
+
+ wxContextMenuEvent evtCtx(
+ wxEVT_CONTEXT_MENU,
+ GetParent()->GetId(),
+ ClientToScreen(event.GetPosition()));
+ evtCtx.SetEventObject(GetParent());
+ GetParent()->GetEventHandler()->ProcessEvent(evtCtx);
+ }
+ else
+ {
+ // reset the selection and bail out
+ HighlightAll(false);
+ }
+
+ return;
+ }
+
+ bool forceClick = false;
+ if (event.ButtonDClick())
+ {
+ if ( m_renameTimer->IsRunning() )
+ m_renameTimer->Stop();
+
+ m_lastOnSame = false;
+
+ if ( current == m_lineLastClicked )
+ {
+ SendNotify( current, wxEVT_COMMAND_LIST_ITEM_ACTIVATED );
+
+ return;
+ }
+ else
+ {
+ // The first click was on another item, so don't interpret this as
+ // a double click, but as a simple click instead
+ forceClick = true;
+ }
+ }
+
+ if (event.LeftUp())
+ {
+ if (m_lineSelectSingleOnUp != (size_t)-1)
+ {
+ // select single line
+ HighlightAll( false );
+ ReverseHighlight(m_lineSelectSingleOnUp);
+ }
+
+ if (m_lastOnSame)
+ {
+ if ((current == m_current) &&
+ (hitResult == wxLIST_HITTEST_ONITEMLABEL) &&
+ HasFlag(wxLC_EDIT_LABELS) )
+ {
+ if ( !InReportView() ||
+ GetLineLabelRect(current).Contains(x, y) )
+ {
+ int dclick = wxSystemSettings::GetMetric(wxSYS_DCLICK_MSEC);
+ m_renameTimer->Start(dclick > 0 ? dclick : 250, true);
+ }
+ }
+ }
+
+ m_lastOnSame = false;
+ m_lineSelectSingleOnUp = (size_t)-1;
+ }
+ else
+ {
+ // This is necessary, because after a DnD operation in
+ // from and to ourself, the up event is swallowed by the
+ // DnD code. So on next non-up event (which means here and
+ // now) m_lineSelectSingleOnUp should be reset.
+ m_lineSelectSingleOnUp = (size_t)-1;
+ }
+ if (event.RightDown())
+ {
+ m_lineBeforeLastClicked = m_lineLastClicked;
+ m_lineLastClicked = current;
+
+ // If the item is already selected, do not update the selection.
+ // Multi-selections should not be cleared if a selected item is clicked.
+ if (!IsHighlighted(current))
+ {
+ HighlightAll(false);
+ ChangeCurrent(current);
+ ReverseHighlight(m_current);
+ }
+
+ SendNotify( current, wxEVT_COMMAND_LIST_ITEM_RIGHT_CLICK, event.GetPosition() );
+
+ // Allow generation of context menu event
+ event.Skip();
+ }
+ else if (event.MiddleDown())
+ {
+ SendNotify( current, wxEVT_COMMAND_LIST_ITEM_MIDDLE_CLICK );
+ }
+ else if ( event.LeftDown() || forceClick )
+ {
+ m_lineBeforeLastClicked = m_lineLastClicked;
+ m_lineLastClicked = current;
+
+ size_t oldCurrent = m_current;
+ bool oldWasSelected = IsHighlighted(m_current);
+
+ bool cmdModifierDown = event.CmdDown();
+ if ( IsSingleSel() || !(cmdModifierDown || event.ShiftDown()) )
+ {
+ if ( IsSingleSel() || !IsHighlighted(current) )
+ {
+ HighlightAll( false );
+
+ ChangeCurrent(current);
+
+ ReverseHighlight(m_current);
+ }
+ else // multi sel & current is highlighted & no mod keys
+ {
+ m_lineSelectSingleOnUp = current;
+ ChangeCurrent(current); // change focus
+ }
+ }
+ else // multi sel & either ctrl or shift is down
+ {
+ if (cmdModifierDown)
+ {
+ ChangeCurrent(current);
+
+ ReverseHighlight(m_current);
+ }
+ else if (event.ShiftDown())
+ {
+ ChangeCurrent(current);
+
+ size_t lineFrom = oldCurrent,
+ lineTo = current;
+
+ if ( lineTo < lineFrom )
+ {
+ lineTo = lineFrom;
+ lineFrom = m_current;
+ }
+
+ HighlightLines(lineFrom, lineTo);
+ }
+ else // !ctrl, !shift
+ {
+ // test in the enclosing if should make it impossible
+ wxFAIL_MSG( _T("how did we get here?") );
+ }
+ }
+
+ if (m_current != oldCurrent)
+ RefreshLine( oldCurrent );
+
+ // forceClick is only set if the previous click was on another item
+ m_lastOnSame = !forceClick && (m_current == oldCurrent) && oldWasSelected;
+ }
+}
+
+void wxListMainWindow::MoveToItem(size_t item)
+{
+ if ( item == (size_t)-1 )
+ return;
+
+ wxRect rect = GetLineRect(item);
+
+ int client_w, client_h;
+ GetClientSize( &client_w, &client_h );
+
+ const int hLine = GetLineHeight();
+
+ int view_x = SCROLL_UNIT_X * GetListCtrl()->GetScrollPos( wxHORIZONTAL );
+ int view_y = hLine * GetListCtrl()->GetScrollPos( wxVERTICAL );
+
+ if ( InReportView() )
+ {
+ // the next we need the range of lines shown it might be different,
+ // so recalculate it
+ ResetVisibleLinesRange();
+
+ if (rect.y < view_y)
+ GetListCtrl()->Scroll( -1, rect.y / hLine );
+ if (rect.y + rect.height + 5 > view_y + client_h)
+ GetListCtrl()->Scroll( -1, (rect.y + rect.height - client_h + hLine) / hLine );
+
+#ifdef __WXMAC__
+ // At least on Mac the visible lines value will get reset inside of
+ // Scroll *before* it actually scrolls the window because of the
+ // Update() that happens there, so it will still have the wrong value.
+ // So let's reset it again and wait for it to be recalculated in the
+ // next paint event. I would expect this problem to show up in wxGTK
+ // too but couldn't duplicate it there. Perhaps the order of events
+ // is different... --Robin
+ ResetVisibleLinesRange();
+#endif
+ }
+ else // !report
+ {
+ int sx = -1,
+ sy = -1;
+
+ if (rect.x-view_x < 5)
+ sx = (rect.x - 5) / SCROLL_UNIT_X;
+ if (rect.x + rect.width - 5 > view_x + client_w)
+ sx = (rect.x + rect.width - client_w + SCROLL_UNIT_X) / SCROLL_UNIT_X;
+
+ if (rect.y-view_y < 5)
+ sy = (rect.y - 5) / hLine;
+ if (rect.y + rect.height - 5 > view_y + client_h)
+ sy = (rect.y + rect.height - client_h + hLine) / hLine;
+
+ GetListCtrl()->Scroll(sx, sy);
+ }
+}
+
+bool wxListMainWindow::ScrollList(int WXUNUSED(dx), int dy)
+{
+ if ( !InReportView() )
+ {
+ // TODO: this should work in all views but is not implemented now
+ return false;
+ }
+
+ size_t top, bottom;
+ GetVisibleLinesRange(&top, &bottom);
+
+ if ( bottom == (size_t)-1 )
+ return 0;
+
+ ResetVisibleLinesRange();
+
+ int hLine = GetLineHeight();
+
+ GetListCtrl()->Scroll(-1, top + dy / hLine);
+
+#ifdef __WXMAC__
+ // see comment in MoveToItem() for why we do this
+ ResetVisibleLinesRange();
+#endif
+
+ return true;
+}
+
+// ----------------------------------------------------------------------------
+// keyboard handling
+// ----------------------------------------------------------------------------
+
+void wxListMainWindow::OnArrowChar(size_t newCurrent, const wxKeyEvent& event)
+{
+ wxCHECK_RET( newCurrent < (size_t)GetItemCount(),
+ _T("invalid item index in OnArrowChar()") );
+
+ size_t oldCurrent = m_current;
+
+ // in single selection we just ignore Shift as we can't select several
+ // items anyhow
+ if ( event.ShiftDown() && !IsSingleSel() )
+ {
+ ChangeCurrent(newCurrent);
+
+ // refresh the old focus to remove it
+ RefreshLine( oldCurrent );
+
+ // select all the items between the old and the new one
+ if ( oldCurrent > newCurrent )
+ {
+ newCurrent = oldCurrent;
+ oldCurrent = m_current;
+ }
+
+ HighlightLines(oldCurrent, newCurrent);
+ }
+ else // !shift
+ {
+ // all previously selected items are unselected unless ctrl is held
+ // in a multiselection control
+ if ( !event.ControlDown() || IsSingleSel() )
+ HighlightAll(false);
+
+ ChangeCurrent(newCurrent);
+
+ // refresh the old focus to remove it
+ RefreshLine( oldCurrent );
+
+ // in single selection mode we must always have a selected item
+ if ( !event.ControlDown() || IsSingleSel() )
+ HighlightLine( m_current, true );
+ }
+
+ RefreshLine( m_current );
+
+ MoveToFocus();
+}
+
+void wxListMainWindow::OnKeyDown( wxKeyEvent &event )
+{
+ wxWindow *parent = GetParent();
+
+ // propagate the key event upwards
+ wxKeyEvent ke(event);
+ ke.SetEventObject( parent );
+ if (parent->GetEventHandler()->ProcessEvent( ke ))
+ return;
+
+ event.Skip();
+}
+
+void wxListMainWindow::OnKeyUp( wxKeyEvent &event )
+{
+ wxWindow *parent = GetParent();
+
+ // propagate the key event upwards
+ wxKeyEvent ke(event);
+ if (parent->GetEventHandler()->ProcessEvent( ke ))
+ return;
+
+ event.Skip();
+}
+
+void wxListMainWindow::OnChar( wxKeyEvent &event )
+{
+ wxWindow *parent = GetParent();
+
+ // send a list_key event up
+ if ( HasCurrent() )
+ {
+ wxListEvent le( wxEVT_COMMAND_LIST_KEY_DOWN, GetParent()->GetId() );
+ le.m_itemIndex = m_current;
+ GetLine(m_current)->GetItem( 0, le.m_item );
+ le.m_code = event.GetKeyCode();
+ le.SetEventObject( parent );
+ parent->GetEventHandler()->ProcessEvent( le );
+ }
+
+ if ( (event.GetKeyCode() != WXK_UP) &&
+ (event.GetKeyCode() != WXK_DOWN) &&
+ (event.GetKeyCode() != WXK_RIGHT) &&
+ (event.GetKeyCode() != WXK_LEFT) &&
+ (event.GetKeyCode() != WXK_PAGEUP) &&
+ (event.GetKeyCode() != WXK_PAGEDOWN) &&
+ (event.GetKeyCode() != WXK_END) &&
+ (event.GetKeyCode() != WXK_HOME) )
+ {
+ // propagate the char event upwards
+ wxKeyEvent ke(event);
+ ke.SetEventObject( parent );
+ if (parent->GetEventHandler()->ProcessEvent( ke ))
+ return;
+ }
+
+ if ( HandleAsNavigationKey(event) )
+ return;
+
+ // no item -> nothing to do
+ if (!HasCurrent())
+ {
+ event.Skip();
+ return;
+ }
+
+ // don't use m_linesPerPage directly as it might not be computed yet
+ const int pageSize = GetCountPerPage();
+ wxCHECK_RET( pageSize, _T("should have non zero page size") );
+
+ if (GetLayoutDirection() == wxLayout_RightToLeft)
+ {
+ if (event.GetKeyCode() == WXK_RIGHT)
+ event.m_keyCode = WXK_LEFT;
+ else if (event.GetKeyCode() == WXK_LEFT)
+ event.m_keyCode = WXK_RIGHT;
+ }
+
+ switch ( event.GetKeyCode() )
+ {
+ case WXK_UP:
+ if ( m_current > 0 )
+ OnArrowChar( m_current - 1, event );
+ break;
+
+ case WXK_DOWN:
+ if ( m_current < (size_t)GetItemCount() - 1 )
+ OnArrowChar( m_current + 1, event );
+ break;
+
+ case WXK_END:
+ if (!IsEmpty())
+ OnArrowChar( GetItemCount() - 1, event );
+ break;
+
+ case WXK_HOME:
+ if (!IsEmpty())
+ OnArrowChar( 0, event );
+ break;
+
+ case WXK_PAGEUP:
+ {
+ int steps = InReportView() ? pageSize - 1
+ : m_current % pageSize;
+
+ int index = m_current - steps;
+ if (index < 0)
+ index = 0;
+
+ OnArrowChar( index, event );
+ }
+ break;
+
+ case WXK_PAGEDOWN:
+ {
+ int steps = InReportView()
+ ? pageSize - 1
+ : pageSize - (m_current % pageSize) - 1;
+
+ size_t index = m_current + steps;
+ size_t count = GetItemCount();
+ if ( index >= count )
+ index = count - 1;
+
+ OnArrowChar( index, event );
+ }
+ break;
+
+ case WXK_LEFT:
+ if ( !InReportView() )
+ {
+ int index = m_current - pageSize;
+ if (index < 0)
+ index = 0;
+
+ OnArrowChar( index, event );
+ }
+ break;
projects / wxWidgets.git / blobdiff