// compatibility settings
// ----------------------------------------------------------------------------
-// This setting determines the compatibility with 1.68 API:
-// Level 0: no backward compatibility, all new features
-// Level 1: some extra methods are defined for compatibility.
-//
-// Default is 0.
-//
-// Recommended setting: 0 (in fact the compatibility code is now very minimal
-// so there is little advantage to setting it to 1.
-#define WXWIN_COMPATIBILITY 0
-
-// This setting determines the compatibility with 2.0 API: set it to 1 to
-// enable it
-//
-// Default is 0.
-//
-// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2 0
-
// This setting determines the compatibility with 2.2 API: set it to 1 to
// enable it but please consider updating your code instead.
//
// Default is 0
//
// Recommended setting: 0 (please update your code)
-#define WXWIN_COMPATIBILITY_2_2 1
+#define WXWIN_COMPATIBILITY_2_2 0
// This setting determines the compatibility with 2.4 API: set it to 0 to
// flag all cases of using deprecated functions.
// Recommended setting: 0 (please update your code)
#define WXWIN_COMPATIBILITY_2_4 1
-// Define as 1 for font size to be backward compatible to 1.63 and earlier.
-// 1.64 and later define point sizes to be compatible with Windows.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxFONT_SIZE_COMPATIBILITY 0
-
// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
// If migrating between versions, your dialogs may seem to shrink.
//
// Generic comment about debugging settings: they are very useful if you don't
// use any other memory leak detection tools such as Purify/BoundsChecker, but
// are probably redundant otherwise. Also, Visual C++ CRT has the same features
-// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
// may prefer to use it instead of built in memory debugging code because it is
// faster and more fool proof.
//
// Unicode support
// ----------------------------------------------------------------------------
-// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
// defined as wchar_t, wxString will use Unicode internally. If you set this
// to 1, you must use wxT() macro for all literal strings in the program.
//
//
// Default is 0
//
-// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
+// Recommended setting: 1
#ifndef wxUSE_UNICODE
- #define wxUSE_UNICODE 0
+ #define wxUSE_UNICODE 1
#endif
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
// and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note that
// global features
// ----------------------------------------------------------------------------
+// Compile library in exception-safe mode? If set to 1, the library will try to
+// behave correctly in presence of exceptions (even though it still will not
+// use the exceptions itself) and notify the user code about any unhandled
+// exceptions. If set to 0, propagation of the exceptions through the library
+// code will lead to undefined behaviour -- but the code itself will be
+// slightly smaller and faster.
+//
+// Default is 1
+//
+// Recommended setting: depends on whether you intend to use C++ exceptions
+// in your own code (1 if you do, 0 if you don't)
+#define wxUSE_EXCEPTIONS 0
+
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_EXTENDED_RTTI 0
+
// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
// and for wxHashMap to be implemented with templates.
// Default is 1
//
// Recommended setting: 0 unless you do plan to develop MT applications
-#define wxUSE_THREADS 0
+#define wxUSE_THREADS 1
-// If enabled (1), compiles wxWindows streams classes
+// If enabled (1), compiles wxWidgets streams classes
#define wxUSE_STREAMS 1
// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
// If enabled, the code written by Apple will be used to write, in a portable
// way, float on the disk. See extended.c for the license which is different
-// from wxWindows one.
+// from wxWidgets one.
//
// Default is 1.
//
// wxSystemOptions class
#define wxUSE_SYSTEM_OPTIONS 1
-// wxWave class
-#define wxUSE_WAVE 1
+// wxSound class
+#define wxUSE_SOUND 1
+
+// Use wxMediaCtrl
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_MEDIACTRL 1
+
+// Use QuickTime
+//
+// Default is 0
+//
+// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
+#define wxUSE_QUICKTIME 0
+
+// Use DirectShow
+//
+// Default is 0
+//
+// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
+#define wxUSE_DIRECTSHOW 1
+
+// Use wxWidget's XRC XML-based resource system. Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC 1
+
+// XML parsing classes. Note that their API will change in the future, so
+// using wxXmlDocument and wxXmlNode in your app is not recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (required by XRC)
+#if wxUSE_XRC
+# define wxUSE_XML 1
+#else
+# define wxUSE_XML 0
+#endif
// ----------------------------------------------------------------------------
// Individual GUI controls
// Recommended setting: 1 (may be set to 0)
#define wxUSE_TIPWINDOW 1
-// Each of the settings below corresponds to one wxWindows control. They are
+// Each of the settings below corresponds to one wxWidgets control. They are
// all switched on by default but may be disabled if you are sure that your
// program (including any standard dialogs it can show!) doesn't need them and
// if you desperately want to save some space. If you use any of these you must
// Default is 1
//
// Recommended setting: 1
+#ifdef __SMARTPHONE__
+#define wxUSE_STATUSBAR 0
+#else
#define wxUSE_STATUSBAR 1
+#endif
// Two status bar implementations are available under Win32: the generic one
// or the wrapper around native control. For native look and feel the native
#define wxUSE_TOOLBAR 1
#define wxUSE_TOOLBAR_NATIVE 1
-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR 1
-
// wxNotebook is a control with several "tabs" located on one of its sides. It
// may be used ot logically organise the data presented to the user instead of
// putting everything in one huge dialog. It replaces wxTabControl and related
// Recommended setting: 1
#define wxUSE_NOTEBOOK 1
+// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_LISTBOOK 1
+
+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+
// wxTabDialog is a generic version of wxNotebook but it is incompatible with
// the new class. It shouldn't be used in new code.
//
#define wxUSE_DIB_FOR_BITMAP 0
// Set this to 1 to enable wxDIB
-#define wxUSE_WXDIB 0
+#define wxUSE_WXDIB 1
// ----------------------------------------------------------------------------
// common dialogs
// ----------------------------------------------------------------------------
-// Define 1 to use generic dialogs in Windows, even though they duplicate
-// native common dialog (e.g. wxColourDialog). This is mainly useful for
-// testing.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxUSE_GENERIC_DIALOGS_IN_MSW 0
-
// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
// file selector, printer dialog). Switching this off also switches off the
// printing architecture and interactive wxPrinterDC.
// Set to 0 to disable document/view architecture
#define wxUSE_DOC_VIEW_ARCHITECTURE 1
+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 0
+
// Set to 0 to disable MDI document/view architecture
#define wxUSE_MDI_ARCHITECTURE 0
//
// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
// smaller library.
-#define wxUSE_HTML 0
+#define wxUSE_HTML 1
// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
// that use the connection) should support forward only scrolling of cursors,
// or both forward and backward support for backward scrolling cursors is
// dependent on the data source as well as the ODBC driver being used.
-#define wxODBC_FWD_ONLY_CURSORS 1
+#define wxODBC_FWD_ONLY_CURSORS 1
// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
// member variables. With a setting of 1, full backward compatability with the
#define wxUSE_IMAGE 1
// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
-#define wxUSE_LIBPNG 0
+#define wxUSE_LIBPNG 1
// Set to 1 for JPEG format support (requires libjpeg)
-#define wxUSE_LIBJPEG 0
+#define wxUSE_LIBJPEG 1
// Set to 1 for TIFF format support (requires libtiff)
#define wxUSE_LIBTIFF 0
// Set to 1 for GIF format support
-#define wxUSE_GIF 0
+#define wxUSE_GIF 1
// Set to 1 for PNM format support
#define wxUSE_PNM 0
// Windows-only settings
// ----------------------------------------------------------------------------
-// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
// will override some other settings (see below)
//
// Default is 0.
// Recommended setting: 1
#define wxUSE_OLE 1
-// Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT
-// 3.x. This setting is ignored under Win9x and NT 4.0+.
-//
-// Default is 0 for (most) Win32 (systems), 1 for Win16
-//
-// Recommended setting: same as default
-#if defined(__WIN95__)
-#define wxUSE_CTL3D 0
-#else
-#define wxUSE_CTL3D 1
-#endif
-
// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
// miniframes support instead.
// (notably, wxNotebook pages)
#define wxUSE_UXTHEME_AUTO 0
-// Set to 1 to if you're developing for MS SmartPhone
-#define wxUSE_SMARTPHONE 0
-
// ----------------------------------------------------------------------------
// obsolete settings
// ----------------------------------------------------------------------------
projects / wxWidgets.git / blobdiff