#!/bin/sh
+#
+# Name: wx-config{.in,}
+# Purpose: wx configuration search and query tool {template,}
+# Author: Ron <ron@debian.org>
+# Modified by:
+# Created: 8/9/2004
+# RCS-ID: $Id$
+# Copyright: (c) 2004 Ron <ron@debian.org>
+# Essentially a fresh start this time around, but for maximum
+# compatibility basic code was taken from, and heavy reference
+# made to, the previously unattributed wx-config from cvs.
+# All the usual suspects contributed to the dicussion that led
+# to this new work and likewise to the ideas and content in the
+# original (which was probably influenced by gtk), among them:
+# Robert Roebling, Vadim Zeitlin, Vaclav Slavik, Robin Dunn
+# Licence: wxWindows licence
+############################################################################
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-exec_prefix_set=no
-CC="@CC@"
-CXX="@CXX@"
-LD="@SHARED_LD@"
-cross_compiling=@cross_compiling@
-target=@host_alias@
-static_flag=no
+# We expect a posix shell, so if this is a Bourne shell,
+# and apparently a few still exist, try for bash or ksh.
+if [ ~ = '~' ]
+then
+ if (bash -c echo) >/dev/null 2>&1
+ then
+ exec bash "$0" "$@"
+ fi
+ if (ksh -c echo) >/dev/null 2>&1
+ then
+ exec ksh "$0" "$@"
+ fi
+ echo "$0: this script requires bash or ksh"
+ exit 1
+fi
+
+
+# On with some basic stuff, like the ability to die gracefully,
+# and to tell people what we are about.
+# ------------------------------------------------------------------
+
+# decho _message
+# Output a message to stderr.
+decho() { echo "$*" 1>&2; }
+
+# usage _exitcode
+# Outputs a usage message to stderr and exits with _exitcode.
+# Try to keep this to a single page (ie. < 25 lines). We can add
+# alternate or interactive help targets if people want more detail.
+#
+# Exit codes are now subject to a more strict interpretation.
+# wx-config should return 0 upon successful operation, 1 if the
+# reqested operation could not be completed successfully, and 2
+# if the requested operation is not supported by this version of
+# wx-config.
usage()
{
- cat <<EOF
-Usage: wx-config [--prefix[=DIR]] [--exec-prefix[=DIR]] [--version] [--static]
- [--libs] [--gl-libs] [--cppflags] [--cflags] [--cxxflags] [--rezflags]
- [--cc] [--cxx] [--ld]
-
-wx-config returns configuration information about the installed
-version of wxWindows. It may be used to query its version and
-installation directories and also retrieve the C and C++ compilers
-and linker which were used for its building and the corresponding
-flags.
+ cat 1>&2 <<EOF
+
+ wx-config [--prefix[=DIR]] [--exec-prefix[=DIR]] [--release] [--version-full]
+ [--list] [--host=HOST] [--toolkit=TOOLKIT] [--universal[=yes|no]]
+ [--unicode[=yes|no]] [--debug[=yes|no]] [--static[=yes|no]]
+ [--version[=VERSION]] [--basename] [--cc] [--cppflags] [--cflags]
+ [--cxxflags] [--rezflags] [--libs] [--cxx] [--ld] [--linkdeps]
+ [--utility=UTIL] [LIB ...]
+
+ wx-config returns information about the wxWidgets libraries available
+ on your system. It may be used to retrieve the information you require
+ to build applications using these libraries.
+
+ If alternative builds of wxWidgets exist on the system, you can use the
+ options: --prefix, --host, --toolkit, --unicode, --debug, --static,
+ --version and --universal, to select from them. Use the --list option to
+ show alternatives available which match specified criteria. The unicode,
+ debug, and universal options take an optional yes or no argument, while
+ host and version accept posix extended regex. The --utility option will
+ return the correct version of UTIL to use with the selected library build.
+ --linkdeps returns only static libraries for your makefile link rule deps.
+
+ Optional LIB arguments (comma or space separated) may be used to specify
+ the wxWidgets libraries that you wish to use. The magic "std" label may
+ be used to import all libraries that would be used by default if none were
+ specified explicitly. eg. wx-config --libs core,base.
+
EOF
exit $1
}
-cppflags()
+# Unfussy people are the easiest to deal with, get them out of the way now.
+[ $# -gt 0 ] || usage 1
+
+
+
+# For the people who know what they want, or think they do:
+# Divide the valid arguments into functional groups for later examination,
+# then parse all command line arguments completely, deferring action on
+# output options until all significant input has been processed and any
+# decision about delegation has been taken.
+
+# Note early, that '-' is a complete no-no for use in option names below.
+# It totally falls apart as soon as it becomes part of a variable name.
+# Use '_' instead, and by the magic of it all just being bits, you'll
+# be able to use --my-option or --my_option from the command line at
+# your discretion. They are synonymous as user input, but _ALWAYS_ use
+# underscores for compound names in the code here, never a dash.
+
+
+# The list of all options we recognise. If it is not in here, then
+# it is not something we want to handle.
+# ------------------------------------------------------------------
+
+# Options that specify a distinct library build.
+#
+# Note also that order in this list is significant later on, as this sets
+# the precedence with which we will try to gauge the similarity of other
+# configs to this one. Options earlier in the list should be more crucial
+# to match well than those that follow. Options specified by the user will
+# always take precedence and are not subject to any partial ordering here.
+wxconfig_schema="host toolkit widgetset chartype debugtype flavour version linkage"
+
+# Options that are expected to generate some output.
+wxconfig_output_options="prefix exec_prefix
+ list
+ release version version_full
+ basename
+ cppflags cflags cxxflags
+ rezflags
+ libs
+ linkdeps
+ cc cxx ld
+ gl_libs"
+
+# Options that permit the user to supply hints that may affect the output.
+# These options all accept arbitrary values, to interpret as they please.
+wxconfig_input_options="prefix exec_prefix utility $wxconfig_schema"
+
+# Input options that accept only a yes or no argument.
+wxconfig_yesno_options="universal unicode debug static"
+
+# Boolean options that do something or not.
+wxconfig_flag_options="$wxconfig_yesno_options no_rpath inplace"
+
+
+
+# Some simple sugar coating to keep things more readable below.
+# --------------------------------------------------------------
+
+# option_name _string
+# Returns NAME if _string is of the form: --NAME[=...]
+option_name()
{
- if test "@includedir@" != "/usr/include" \
- -a "@includedir@" != "/usr/include/c++" \
- -a \( "${cross_compiling}" != "yes" \
- -o "@includedir@" != "/usr/${target}/include" \) ;
- then
- includes=-I@includedir@
- fi
+ _option_name_temp=${1%%=*}
+ echo "${_option_name_temp#--}" | tr '-' '_'
+}
- includes="-I@libdir@/wx/include/@TOOLCHAIN_NAME@ $includes"
+# option_value _string
+# Returns FOO if _string is of the form: --option=FOO
+option_value()
+{
+ echo "${1#*=}"
+}
- if test $static_flag = yes ; then
- echo $includes @WXDEBUG_DEFINE@ @TOOLCHAIN_DEFS@ @WXCONFIG_INCLUDE@
+# match_field _value _list
+# Returns true if _value is a field in _list
+match_field()
+{
+ _match_field_match="$1"
+ shift
+ for _match_field_i; do
+ [ "x$_match_field_i" != "x$_match_field_match" ] || return 0
+ done
+ false
+}
+
+# remove_field _value _list
+# Returns _list minus any field(s) that match _value.
+remove_field()
+{
+ _remf_value="$1"
+ _remf_list=''
+ shift
+ if [ -n "$_remf_value" ]; then
+ for _remf_item; do
+ [ "x$_remf_item" = "x$_remf_value" ] ||
+ _remf_list="${_remf_list:+$_remf_list }$_remf_item"
+ done
+ echo "$_remf_list"
else
- echo $includes @WXDEBUG_DEFINE@ @TOOLCHAIN_DEFS@ @TOOLCHAIN_DLL_DEFS@ @WXCONFIG_INCLUDE@
+ echo $*
fi
}
-if test $# -eq 0; then
- usage 1 1>&2
-fi
+# validate_arg _domain _set _name _value
+# Boilerplate to validate an argument and initialise a psuedo-hash.
+# This one is almost reduction into absurdity, and perhaps makes the
+# precise action of the argument parser below just a little more
+# obscure, but oh so neat and compact to use for multiple option
+# groups. It expands to replace repetitive clauses of the form:
+#
+# i="$(option_name $arg)"
+# if match_field "$i" $wxconfig_input_options; then
+# input_options="${input_options:+$input_options }$i"
+# eval "input_option_$i=$(option_value $arg)"
+# continue
+# fi
+#
+# with the one liners you see on the page below.
+validate_arg()
+{
+ if match_field "$3" $(eval echo \"\$$1_$2_options\"); then
+ eval "$2_options=\"\${$2_options:+\$$2_options }$3\""
+ eval "$2_option_$3=\"$4\""
+ return
+ fi
+ false
+}
-while test $# -gt 0; do
- case "$1" in
- -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
+# check_yesno_option _ynoption _option _yesval _noval
+# This one might be made more generic and/or incorporated into
+# validate_arg above at some later stage, but right now we just
+# condition any specialist options into a generic one for later
+# handling. Once they are sanity checked there is no difference
+# in any case.
+check_yesno_option()
+{
+ eval "case \${yesno_option_$1-\${flag_option_$1-unset}} in
+ unset) ;;
+ y*|Y*) input_option_$2=\"$3\" ;;
+ n*|N*) input_option_$2=\"$4\" ;;
+ *)
+ decho
+ decho \" *** Error: Invalid request '--$1=\$yesno_option_$1'\"
+ decho \" Valid arguments for --$1 are: [ yes, no ]\"
+ decho
+ exit 1
+ ;;
+ esac"
+}
+
+
+
+# Now we are ready to find out what the user wants from us.
+# --------------------------------------------------------------
+
+# With just a little more complexity here we could have shortest
+# unique string matching for options, but that is probably overkill
+# today, so lets just get the job done.
+#
+# The important thing now then is that we simply read all input from
+# the user and don't try to act prematurely on partial information.
+# --help or an illegal argument are the only shortcuts out of here
+# at this point, otherwise, it's time to just shut up and listen for
+# a moment.
+
+for arg; do
+ case "$arg" in
+ --help|-h)
+ usage
+ ;;
+
+ --*=*)
+ _name=$(option_name $arg)
+ _value=$(option_value $arg)
+ if validate_arg wxconfig input "$_name" "$_value" ||
+ validate_arg wxconfig yesno "$_name" "$_value"
+ then
+ continue
+ fi
+ ;;
+
+ --*)
+ _name=$(option_name $arg)
+ if validate_arg wxconfig flag "$_name" yes ||
+ validate_arg wxconfig output "$_name" yes
+ then
+ continue
+ fi
+ ;;
- case $1 in
- --prefix=*)
- prefix=$optarg
- if test $exec_prefix_set = no ; then
- exec_prefix=$optarg
- fi
- ;;
- --prefix)
- echo $prefix
- ;;
- --exec-prefix=*)
- exec_prefix=$optarg
- exec_prefix_set=yes
- ;;
- --exec-prefix)
- echo $exec_prefix
- ;;
- --version)
- echo @WX_MAJOR_VERSION_NUMBER@.@WX_MINOR_VERSION_NUMBER@.@WX_RELEASE_NUMBER@
- ;;
- --static)
- static_flag=yes
- ;;
- --cppflags)
- cppflags
- ;;
- --cflags)
- echo `cppflags` @CODE_GEN_FLAGS@
- ;;
- --cxxflags)
- echo `cppflags` @CODE_GEN_FLAGS@ @CODE_GEN_FLAGS_CXX@
- ;;
- --rezflags)
- echo @LIBWXMACRESWXCONFIG@
- ;;
- --libs)
- if test "@libdir@" != "/usr/lib" \
- -a \( "${cross_compiling}" != "yes" \
- -o "@libdir@" != "/usr/${target}/lib" \) ;
- then
- libs="-L@libdir@"
- fi
-
- if test $static_flag = yes ; then
- echo "$libs @LDFLAGS@ @libdir@/@WXCONFIG_LIBS_STATIC@ @LIBS@ @DMALLOC_LIBS@"
- else
- echo $libs @LDFLAGS@ @WXCONFIG_LIBS@ @DMALLOC_LIBS@
- fi
-
- ;;
- --gl-libs)
- if test $static_flag = yes -a "x" != "x@WXCONFIG_LIBS_STATIC_GL@" ; then
- gllibs="@libdir@/@WXCONFIG_LIBS_STATIC_GL@"
- else
- gllibs="@WXCONFIG_LIBS_GL@"
- fi
- echo @LDFLAGS_GL@ "$gllibs"
- ;;
- --cc)
- echo $CC
- ;;
- --cxx)
- echo $CXX
- ;;
- --ld)
- echo $LD
- ;;
*)
- usage 1 1>&2
- ;;
+ # FIXME Surely we can validate the parameters too ...
+ input_parameters="${input_parameters:+$input_parameters }$arg"
+ continue
+ ;;
esac
- shift
+ decho " *** Error: Unrecognised option: '$arg'"
+ decho "Use wx-config --help for information on command line options."
+ exit 2
done
+# validate_arg only checks and decomposes form. Sanity check the yes/no
+# options now too and push their respective mask values into place.
+
+check_yesno_option universal widgetset univ
+check_yesno_option unicode chartype unicode ansi
+check_yesno_option debug debugtype debug release
+check_yesno_option static linkage '-static'
+
+
+# Dump everything we just read in debug mode.
+if [ -n "$WXDEBUG" ]; then
+
+ decho
+ decho " input parameters = $input_parameters"
+ decho " input options = $input_options"
+ for i in $input_options; do
+ decho " $i = $(eval echo \"\$input_option_$i\")"
+ done
+ decho " yes/no options = $yesno_options"
+ for y in $yesno_options; do
+ decho " $y = $(eval echo \"\$yesno_option_$y\")"
+ done
+ decho " flag options = $flag_options"
+ for f in $flag_options; do
+ decho " $f = $(eval echo \"\$flag_option_$f\")"
+ done
+ decho " output options = $output_options"
+ for o in $output_options; do
+ decho " $o = $(eval echo \"\$output_option_$o\")"
+ done
+
+fi
+
+
+
+# Everything came in as a legal argument then, lets put some of
+# the pieces together with a little self knowledge to see what
+# we should do next.
+# --------------------------------------------------------------
+
+# get_mask [ _hash ]
+# Construct a config filename mask from a psuedo-hash of component variables.
+# The optional argument is the prefix of the hash to use. If not specified
+# this will return a mask derived from the command line options that were used.
+get_mask()
+{
+ [ $# -gt 0 ] || set m
+ eval echo "\${$1_host}\${$1_toolkit}\${$1_widgetset}-\${$1_chartype}-\${$1_debugtype}\${$1_linkage}-\${$1_version}\${$1_flavour}"
+}
+
+# Returns true if this script is for a cross compiled config.
+is_cross() { [ "x@cross_compiling@" = "xyes" ]; }
+
+
+# Determine the base directories we require.
+prefix=${input_option_prefix-${this_prefix:-@prefix@}}
+exec_prefix=${input_option_exec_prefix-${input_option_prefix-${this_exec_prefix:-@exec_prefix@}}}
+wxconfdir="@libdir@/wx/config"
+
+installed_configs=$( cd "$wxconfdir" 2> /dev/null && ls | grep -v "^inplace-" )
+
+is_cross && target="@host_alias@"
+
+# Define a pseudo-hash to contain the specification of this wx-config
+# instance and its associated library.
+this_host="${target:+${target}-}"
+this_toolkit="@TOOLKIT_DIR@@TOOLKIT_VERSION@"
+this_widgetset="@WIDGET_SET@"
+this_chartype="@WX_CHARTYPE@"
+this_debugtype="@WX_DEBUGTYPE@"
+this_flavour="@WX_FLAVOUR@"
+this_version="@WX_RELEASE@"
+this_linkage=$( [ "x@SHARED@" = "x1" ] || echo '-static' )
+
+this_config=$(get_mask this)
+
+# Extract the user specification from the options parsed.
+m_host=${input_option_host:+${input_option_host}-?}
+m_host=${m_host:-${input_option_host-$this_host}}
+m_toolkit=${input_option_toolkit:-[^-]+}
+m_widgetset=${input_option_widgetset-(univ)?}
+m_chartype=${input_option_chartype:-(unicode|ansi)}
+m_debugtype=${input_option_debugtype:-(debug|release)}
+m_flavour=${input_option_flavour:+-$input_option_flavour}
+m_flavour=${m_flavour:-${input_option_flavour-(-[^-]+)?}}
+m_version=${input_option_version:-[0-9]+\.[0-9]+}
+m_linkage=${input_option_linkage-(-static)?}
+
+configmask="^$(get_mask)$"
+
+
+# Dump the user specification in debug mode.
+if [ -n "$WXDEBUG" ]; then
+
+ decho
+ decho " prefix = '$prefix'"
+ decho " exec_prefix = '$exec_prefix'"
+ decho " wxconfdir = '$wxconfdir'"
+
+ decho " m_host = '$m_host'"
+ decho " m_toolkit = '$m_toolkit'"
+ decho " m_widgetset = '$m_widgetset'"
+ decho " m_chartype = '$m_chartype'"
+ decho " m_debugtype = '$m_debugtype'"
+ decho " m_flavour = '$m_flavour'"
+ decho " m_version = '$m_version'"
+ decho " m_linkage = '$m_linkage'"
+
+ decho " configmask = '$configmask'"
+ decho " this config = '$this_config'"
+ decho
+
+fi
+
+
+
+# From here on, we'll need to be able to figure out a delegation target.
+# -----------------------------------------------------------------------
+
+# The rules for delegation are:
+#
+# 1. If the specification is so general that it matches the default config
+# (ie. this one on a first pass), then the default config will be used
+# even if other installed libs would also match the spec.
+#
+# 2. If the default config does not match, find a list of all installed
+# libraries that do match.
+# a. If that list is empty, the specification is incompatible
+# with any installed lib. Warn and abort.
+# b. If that list contains exactly one candidate. Delegate to
+# that candidate.
+# c. If the list contains multiple candidates, pass on to step 3.
+#
+# 3. Attempt to discriminate among rival candidates by their similarity
+# to the default configuration (ie. this one). If we can find a unique
+# candidate in this way, delegate to it. If not, present a list of
+# options to the user and request that they disambiguate it with one or
+# more additional fields.
+#
+# To refine the specified pattern, we specialise each unbound field
+# using the default value from this config file. If that results in
+# no matches, we unbind it again and try the next field. If it still
+# results in multiple matches we try binding the next field as well
+# until a unique or null result again occurs.
+#
+# A more general way to look at this, is the feature specifiers are all
+# modifiers of the wx-config you are calling. If you supply none, the
+# default for that build configuration will be used. If you supply one
+# or more that the default build cannot satisfy, it will try to find the
+# config most like itself with the desired feature(s) enabled.
+# The features configured into the first wx-config called will be taken
+# as implicitly specified if it is necessary to disambiguate likely
+# candidates from the information that was explicitly provided.
+
+
+# But first, more sugar to keep what follows clear and legible.
+# --------------------------------------------------------------
+
+# find_eligible_delegates _mask
+# Outputs all the config files installed which match the
+# (extended regex) _mask passed as an argument.
+find_eligible_delegates() { echo "$installed_configs" | grep -E "$1" 2> /dev/null; }
+
+# user_mask_fits _config
+# Returns true if the string _config satisfies the user specified mask.
+user_mask_fits() { echo "$1" | grep -E "$configmask" > /dev/null 2>&1; }
+
+# count_fields _word
+# Returns the number of IFS split fields in _word
+count_fields() { return $#; }
+
+# count_delegates _mask
+# Return the number of eligible config files that match _mask
+count_delegates() { count_fields $(find_eligible_delegates $1); }
+
+# is_set _variablename
+# Returns true if $_variablename is initialised.
+is_set() { [ "x$(eval echo \"\${$1-unset}\")" != "xunset" ]; }
+
+# do_find_best_delegate _unbound-options
+# The real worker part of find_best_delegate below. Recurses though all
+# unbound options binding them one at a time to the default derived from
+# this file until a unique match is made or no alternatives remain that
+# may be sensibly guessed at. It will preferentially bind the unspecified
+# options in the order they are listed in wxconfig_schema. Using this
+# partial ordering it should find the first match with the most significant
+# similarity to this file that unambiguously meets the user specification.
+# If such a match exists it will be output to stdout.
+#
+# Be careful if you modify this function. If the pruning logic is rendered
+# inoperative it will simply recurse over every permutation in the search
+# space, which may still appear to work, but add a couple more options (or
+# explicitly specify a few less) and you may not live long enough to learn
+# the result. WXDEBUG=findprogress is your friend here, it will show you
+# how many nodes get searched before a result. If you start seeing
+# increases in that number for the same input, check your work.
+# Raising the number of discriminating options from 6 to 8 raised the worst
+# case time for this to run (without pruning) from 3 to nearly 15 seconds
+# and its downhill fast from here if we have to ride that boat.
+# Early pruning still gets that down to under half a second (up from about
+# .25), so we have some breathing space yet before a different search method
+# will be called for, but lets not squander it.
+do_find_best_delegate()
+{
+ (
+ if [ "x$WXDEBUG" = "xverbose" ]; then
+ _fbd_indent="${_fbd_indent}. "
+ decho " $_fbd_indent---> unbound options: $*"
+ fi
+
+ for i; do
+
+ if [ "x$WXDEBUG" = "xverbose" ]; then
+ decho " ${_fbd_indent}binding '$i' with '$(remove_field $i $*)' still free"
+ [ -z "$_pruned" ] || decho " ${_fbd_indent} --- pruned: $_pruned ---"
+ fi
+
+ if (
+ eval m_$i=\$this_$i
+ _mask="^$(get_mask)$"
+
+ if [ "x$WXDEBUG" = "xverbose" ]; then
+ decho " ${_fbd_indent} checking: $_mask"
+ count_delegates "$_mask"
+ decho " $_fbd_indent $? eligible delegates"
+ for d in $(find_eligible_delegates "$_mask"); do
+ decho " ${_fbd_indent} $d"
+ done
+ fi
+
+ count_delegates "$_mask"
+ _still_eligible=$?
+
+ if [ $_still_eligible -eq 1 ]; then
+ echo $(find_eligible_delegates "$_mask")
+ return
+ fi
+
+ [ "x$WXDEBUG" != "xfindprogress" ] || printf "." 1>&2
+
+ [ $_still_eligible -gt 1 ] && [ $# -gt 1 ] &&
+ do_find_best_delegate $(remove_field $i $*)
+ )
+ then
+
+ return
+
+ elif [ $# -gt 1 ]; then
+
+ if [ "x$WXDEBUG" = "xverbose" ]; then
+ decho " ${_fbd_indent}pruning: $i"
+ _pruned="${_pruned:+$_pruned }$i"
+ fi
+ set $(remove_field $i $*)
+
+ fi
+
+ done
+ false
+ )
+}
+
+# find_best_delegate
+# A simple wrapper around do_find_best_delegate that first determines
+# the unbound options (ie. the ones that the user did not explicitly
+# declare a preference for on the command line)
+find_best_delegate()
+{
+ for _fbdi in $wxconfig_schema; do
+ is_set input_option_$_fbdi ||
+ _unbound_options="${_unbound_options:+$_unbound_options }$_fbdi"
+ done
+ do_find_best_delegate $_unbound_options
+}
+
+
+# Legacy wx-config helpers.
+# -------------------------
+
+# get_legacy_mask
+# Returns a mask in the format used by wx2.4.
+get_legacy_mask()
+{
+ [ $# -gt 0 ] || set m
+ eval [ "x\${$1_chartype}" != "xunicode" ] || _unicode_flag=u
+ eval [ "x\${$1_debugtype}" != "xdebug" ] || _debug_flag=d
+ eval echo "wx\${$1_toolkit}${_unicode_flag}${_debug_flag}-\${$1_version}\${$1_host}-config"
+}
+
+# find_legacy_configs
+# Returns a list of configs installed by wx2.4 releases.
+find_legacy_configs()
+{
+ (
+ cd "$prefix/bin" &&
+ {
+ ls wx*-2.4-config | grep -v ^wxbase
+ ls wx*-2.4-config | grep ^wxbase
+ }
+ ) 2> /dev/null
+}
+
+# find_best_legacy_config
+# Returns the best legacy config for a given specification.
+# This assumes no matching new style config has been found.
+find_best_legacy_config()
+{
+ _legacy_configs=$(find_legacy_configs)
+ if [ -n "$_legacy_configs" ]; then
+ _legacy_mask=$(get_legacy_mask)
+ for d in $_legacy_configs; do
+ if echo $d | grep -E $_legacy_mask > /dev/null 2>&1 ; then
+ echo "$d"
+ return
+ fi
+ done
+ fi
+ false
+}
+
+
+
+# The only action we can perform authoritatively prior to delegation
+# is to list all the possible delegates.
+# --------------------------------------------------------------
+
+config_spec="$0 $*"
+[ -z "$WXDEBUG" ] || config_spec=$configmask
+
+# Next chance for another satisfied customer then
+#
+# If we want to get really polished here we can do plural checking,
+# but we should probably leave that until the day we gettextise it.
+if [ -n "$output_option_list" ]; then
+
+ _remains_in_prefix=$installed_configs
+ _delegates=$(find_eligible_delegates $configmask)
+ _best_delegate=$(find_best_delegate)
+
+ if [ "x$WXDEBUG" = "xverbose" ]; then
+ decho
+ decho " all = $_remains_in_prefix"
+ decho " matching = $_delegates"
+ decho " best = $_best_delegate"
+ decho " this = $this_config"
+ fi
+
+ for d in $_delegates; do
+ _remains_in_prefix=$(remove_field $d $_remains_in_prefix)
+ done
+
+ echo
+ echo " Default config is $this_config"
+ echo
+
+ if user_mask_fits "$this_config" ; then
+
+ echo " Default config ${this_exec_prefix+in $this_exec_prefix }will be used for output"
+
+ if match_field "$this_config" $_delegates ; then
+ _delegates=$(remove_field $this_config $_delegates)
+ else
+ echo " though it is not installed in: $prefix"
+ if [ -n "$_best_delegate" ] && [ "x$_best_delegate" != "x$this_config" ]; then
+ echo
+ echo " Best alternate in $prefix:"
+ echo " $_best_delegate"
+ fi
+ fi
+
+ elif [ -n "$_best_delegate" ]; then
+
+ echo " Specification best match: $_best_delegate"
+
+ elif [ -z "$_delegates" ]; then
+
+ _last_chance=$(find_best_legacy_config)
+ if [ -n "$_last_chance" ]; then
+
+ echo " Specification matches legacy config: $_last_chance"
+
+ else
+
+ cat <<-EOF
+ No config found to match: $config_spec
+ in $wxconfdir
+
+ Please install the desired library build, or specify a different
+ prefix where it may be found. If the library is not installed
+ you may call its wx-config directly by specifying its full path.
+
+ EOF
+
+ fi
+
+ else
+ echo " Specification was ambiguous. Use additional feature options"
+ echo " to choose between alternate matches."
+ fi
+
+ _delegates=$(remove_field "$_best_delegate" $_delegates)
+
+ if [ -n "$_delegates" ]; then
+ echo
+ echo " Alternate matches:"
+ for d in $_delegates; do
+ echo " $d"
+ done
+ fi
+ if [ -n "$_remains_in_prefix" ]; then
+ echo
+ echo " Also available in $prefix:"
+ for d in $_remains_in_prefix; do
+ echo " $d"
+ done
+ fi
+
+ _legacy_configs=$(find_legacy_configs)
+ if [ -n "$_legacy_configs" ]; then
+ echo
+ echo " Legacy configs available in $prefix:"
+ for d in $_legacy_configs; do
+ echo " ${d%-config}"
+ done
+ fi
+
+ echo
+ exit
+fi
+
+
+
+# ... so if that wasn't what they wanted, then we need to know for
+# certain, can this config satisfy the user specification?
+# --------------------------------------------------------------
+
+if ! user_mask_fits "$this_config" ; then
+
+ # No? Then lets see if it knows anybody who can.
+ # But first, just be sure someone hasn't typo'd us into a loop.
+ # In present day wx, correct delegation should never need more
+ # than one hop so this is trivial to detect.
+
+ if [ -n "$WXCONFIG_DELEGATED" ]; then
+ decho
+ decho " *** Error: Bad config delegation"
+ decho
+ decho " to: $0"
+ decho " ($this_config) cannot satisfy:"
+ decho " $config_spec"
+ decho " Someone has been terribly careless."
+ decho
+ exit 1
+ fi
+
+ count_delegates "$configmask"
+ _numdelegates=$?
+
+ if [ -n "$WXDEBUG" ]; then
+ decho " must delegate to an alternate config"
+ decho " potential delegates ($_numdelegates):"
+ for i in $(find_eligible_delegates "$configmask"); do
+ decho " $i"
+ done
+ fi
+
+ if [ $_numdelegates -eq 0 ]; then
+
+ _last_chance=$(find_best_legacy_config)
+ if [ -n "$_last_chance" ]; then
+
+ for arg; do
+ case "$arg" in
+ --prefix*|--exec-prefix*| \
+ --version|--release|--basename| \
+ --static|--libs|--gl_libs| \
+ --cppflags|--cflags|--cxxflags| \
+ --cc|--cxx|--ld| \
+ --rezflags|--inplace)
+ _legacy_args="$_legacy_args $arg"
+ ;;
+
+ --static|--static=y*|--static=Y*)
+ _legacy_args="$_legacy_args --static"
+ ;;
+ esac
+ done
+
+ if [ -n "$WXDEBUG" ]; then
+ decho " found a suitable legacy delegate: $_last_chance"
+ decho "--> $prefix/bin/$_last_chance $_legacy_args"
+ fi
+
+ export WXCONFIG_DELEGATED=yes
+ $prefix/bin/$_last_chance $_legacy_args
+ exit
+
+ else
+
+ cat 1>&2 <<-EOF
+
+ Warning: No config found to match: $config_spec
+ in $wxconfdir
+ If you require this configuration, please install the desired
+ library build. If this is part of an automated configuration
+ test and no other errors occur, you may safely ignore it.
+ You may use wx-config --list to see all configs available in
+ the default prefix.
+
+ EOF
+
+ # PIPEDREAM: from here we are actually just a teensy step
+ # from simply building the missing config for the user
+ # on the fly if this is an in tree wx-config.
+
+ exit 1
+ fi
+ fi
+
+ if [ $_numdelegates -gt 1 ]; then
+
+ [ -z "$WXDEBUG" ] || decho " must prune the list of eligible delegates"
+
+ best_delegate=$(find_best_delegate)
+
+ if [ -n "$best_delegate" ]; then
+
+ if [ -n "$WXDEBUG" ]; then
+ decho " found a suitable delegate: $best_delegate"
+ decho "--> $wxconfdir/$best_delegate $*"
+ fi
+
+ export WXCONFIG_DELEGATED=yes
+ $wxconfdir/$best_delegate $*
+ exit
+ fi
+
+ decho
+ decho " *** Error: Specification is ambiguous"
+ decho " as $config_spec"
+ decho " Use additional feature options to choose between:"
+ for i in $(find_eligible_delegates "$configmask"); do
+ decho " $i"
+ done
+ decho
+
+ exit 1
+ fi
+
+ if [ -n "$WXDEBUG" ]; then
+ decho " using the only suitable delegate"
+ decho "--> $wxconfdir/$(find_eligible_delegates $configmask) $*"
+ fi
+
+ export WXCONFIG_DELEGATED=yes
+ $wxconfdir/$(find_eligible_delegates $configmask) $*
+ exit
+fi
+
+
+
+# If we are still here, then from now on we are responsible for
+# all the user's needs. Time to rustle up some output for them.
+# --------------------------------------------------------------
+
+[ -z "$WXDEBUG" ] || decho " using this config"
+
+# If the user supplied a prefix, and the in tree config did not
+# delegate out to anything in that prefix, then reset the build
+# tree prefix to provide the correct output for using this
+# uninstalled wx build. Or put more simply:
+prefix=${this_prefix-$prefix}
+exec_prefix=${this_exec_prefix-$exec_prefix}
+
+includedir="@includedir@"
+libdir="@libdir@"
+bindir="@bindir@"
+
+# Trivial queries we can answer now.
+[ -z "$output_option_prefix" ] || echo $prefix
+[ -z "$output_option_exec_prefix" ] || echo $exec_prefix
+[ -z "$output_option_release" ] || echo "@WX_RELEASE@"
+[ -z "$output_option_version" ] || echo "@WX_VERSION@"
+[ -z "$output_option_version_full" ] || echo "@WX_SUBVERSION@"
+[ -z "$output_option_basename" ] || echo "@WX_LIBRARY_BASENAME_GUI@"
+[ -z "$output_option_rezflags" ] || echo $(eval echo "@MACRESWXCONFIG@")
+[ -z "$output_option_cc" ] || echo "@CC@"
+[ -z "$output_option_cxx" ] || echo "@CXX@"
+[ -z "$output_option_ld" ] || echo "@EXE_LINKER@"
+
+
+# The rest are going to need a little more work.
+# --------------------------------------------------------------
+
+is_monolithic() { [ "x@MONOLITHIC@" = "x1" ]; }
+is_static() { [ -n "$this_linkage" ]; }
+is_installed() { [ -z "$this_prefix" ]; }
+
+
+# Is the user after a support utility?
+# If this is a cross build, we need to find and return a suitable
+# native utility for the job, so we search:
+#
+# 1. local build dir (for native uninstalled builds only).
+# 2. (optional) user supplied prefix.
+# 3. configured install prefix.
+# 4. environment $PATH.
+#
+# and if such a thing still cannot be found, exit signalling an error.
+if [ -n "$input_option_utility" ]; then
+
+ # This is dumb, in tree binaries should be in a standard location
+ # like the libs, but work with what we've got for now.
+ is_cross || _util="$exec_prefix/utils/$input_option_utility/$input_option_utility"
+
+ if ! is_installed && [ -x "$_util" ]; then
+ is_static || _preload="eval LD_LIBRARY_PATH=$exec_prefix/lib"
+ echo $_preload $_util
+ exit
+ fi
+
+ IFS=':'
+ _user_prefix=${input_option_exec_prefix:-$input_option_prefix}
+
+ for _util in "${input_option_utility}-@WX_RELEASE@@WX_FLAVOUR@" \
+ "${input_option_utility}-@WX_RELEASE@" \
+ "${input_option_utility}"
+ do
+ for p in ${_user_prefix:+$_user_prefix/bin} $bindir $PATH; do
+
+ [ -z "$WXDEBUG" ] || decho " checking for: '$p/$_util'"
+
+ if [ -x "$p/$_util" ]; then
+ echo "$p/$_util"
+ exit
+ fi
+
+ done
+ done
+ exit 1
+
+fi
+
+
+# Still here? Then get the options together for building an app.
+# ----------------------------------------------------------------
+
+# Additional configuration for individual library components.
+ldflags_gl="@LDFLAGS_GL@"
+
+ldlibs_base="@WXCONFIG_EXTRALIBS@"
+ldlibs_core="@EXTRALIBS_GUI@"
+ldlibs_gl="@OPENGL_LIBS@"
+ldlibs_html="@EXTRALIBS_HTML@"
+ldlibs_xml="@EXTRALIBS_XML@"
+ldlibs_odbc="@EXTRALIBS_ODBC@"
+ldlibs_adv="@EXTRALIBS_SDL@"
+
+
+# lib_flags_for _liblist
+# This function returns a list of flags suitable to return with the
+# output of --libs for all of the libraries in _liblist. You can
+# add support for a new library by adding an entry for it in the
+# psuedo-hashes above if it requires additional linker options.
+lib_flags_for()
+{
+ [ -z "$WXDEBUG" ] || decho " fetching lib flags for: '$*'"
+
+ _all_ldflags=''
+ _all_libs=''
+ _wxlibs=''
+
+ is_cross && _target="-${target}"
+
+ for lib; do
+
+ # We evidently can't trust people not to duplicate things in
+ # configure, or to keep them in any sort of sane order overall,
+ # so only add unique new fields here even if it takes us a while.
+ # In the case of libs, we bubble any duplicates to the end,
+ # because if multiple libs require it, static linking at least
+ # will require it to come after all of them. So long as local
+ # order is ok in configure then we should always be able to
+ # massage a correct result here like this.
+ #
+ # FIXME: ldlibs_core is totally bogus. Fix the duplication
+ # there independently of this. This covers for it, but we
+ # want to do this anyway because some libs may share common
+ # deps without a common ancestor in wx. This is not a licence
+ # for sloppy work elsewhere though and @GUI_TK_LIBRARY should
+ # be fixed.
+
+ for f in $(eval echo \"\$ldflags_$lib\"); do
+ match_field "$f" $_all_ldflags || _all_ldflags="$_all_ldflags $f"
+ done
+
+ if match_field "$lib" @CORE_BASE_LIBS@ ; then
+ _libname="@WX_LIBRARY_BASENAME_NOGUI@"
+ else
+ _libname="@WX_LIBRARY_BASENAME_GUI@"
+ fi
+ [ $lib = base ] || _libname="${_libname}_$lib"
+ _libname="${_libname}-@WX_RELEASE@$_target"
+
+ if is_static; then
+ _wxlibs="$_wxlibs ${libdir}/lib${_libname}.a"
+ for f in $(eval echo \"\$ldlibs_$lib\"); do
+ _all_libs="$(remove_field $f $_all_libs) $f"
+ done
+ else
+ _wxlibs="$_wxlibs -l${_libname}"
+ fi
+
+ done
+
+ if [ -n "$WXDEBUG" ]; then
+ decho " retrieved: ldflags = $_all_ldflags"
+ decho " wxlibs = $_wxlibs"
+ decho " alllibs = $_all_libs"
+ fi
+
+ echo $_all_ldflags $_wxlibs $_all_libs
+}
+
+# this is the strict subset of the above function which returns only the
+# (static) libraries themselves: this is used for linkdeps output which should
+# output the list of libraries the main program should depend on
+#
+# of course, this duplication is bad but I'll leave to somebody else the care
+# of refactoring this as I don't see any way to do it
+link_deps_for()
+{
+ _wxlibs=''
+
+ is_cross && _target="-${target}"
+
+ for lib; do
+ if match_field "$lib" @CORE_BASE_LIBS@ ; then
+ _libname="@WX_LIBRARY_BASENAME_NOGUI@"
+ else
+ _libname="@WX_LIBRARY_BASENAME_GUI@"
+ fi
+ [ $lib = base ] || _libname="${_libname}_$lib"
+ _libname="${_libname}-@WX_RELEASE@$_target"
+
+ _wxlibs="$_wxlibs ${libdir}/lib${_libname}.a"
+ done
+
+ echo $_wxlibs
+}
+
+# Sanity check the list of libs the user provided us, if any.
+# --------------------------------------------------------------
+
+wx_libs=$(echo "$input_parameters" | tr ',' ' ')
+
+[ -z "$WXDEBUG" ] || decho " user supplied libs: '$wx_libs'"
+
+if is_monolithic; then
+
+ # Core libs are already built into the blob.
+ for i in std @CORE_GUI_LIBS@ @CORE_BASE_LIBS@; do
+ wx_libs=$(remove_field $i $wx_libs)
+ done
+
+ wx_libs="@WXCONFIG_LDFLAGS_GUI@ $(lib_flags_for $wx_libs)"
+
+ # We still need the core lib deps for a static build though
+ if is_static; then
+ link_deps="${libdir}/libwx_@TOOLCHAIN_NAME@.a"
+ wx_libs="$wx_libs $link_deps $ldlibs_core @LIBS@"
+ else
+ wx_libs="$wx_libs -lwx_@TOOLCHAIN_NAME@"
+ fi
+
+ using_gui=yes
+
+else # MONOLITHIC = 0
+
+ # Import everything by default, expand std if specified, or add base if omitted.
+ if [ -z "$wx_libs" ]; then
+ wx_libs="@CORE_GUI_LIBS@ @CORE_BASE_LIBS@"
+ elif match_field std $wx_libs; then
+ # Bubble any libs that were already specified to the end
+ # of the list and ensure static linking order is retained.
+ wx_libs=$(remove_field std $wx_libs)
+ for i in @CORE_GUI_LIBS@ @CORE_BASE_LIBS@; do
+ wx_libs="$(remove_field $i $wx_libs) $i"
+ done
+ elif ! match_field base $wx_libs ; then
+ wx_libs="$wx_libs base"
+ fi
+
+ using_gui=no
+ for i in $wx_libs ; do
+ if match_field "$i" @CORE_GUI_LIBS@ ; then
+ _guildflags="@WXCONFIG_LDFLAGS_GUI@"
+ using_gui=yes
+ break
+ fi
+ match_field "$i" @CORE_BASE_LIBS@ || using_gui=yes
+ done
+
+ if is_static; then
+ link_deps=$(link_deps_for $wx_libs)
+ fi
+ wx_libs="$_guildflags $(lib_flags_for $wx_libs)"
+fi
+
+
+if [ -n "$WXDEBUG" ]; then
+ decho
+ decho " using libs: '$wx_libs'"
+ decho " using_gui = $using_gui"
+ decho
+fi
+
+
+# Endgame. Nothing left to discover now.
+# --------------------------------------------------------------
+
+[ "$using_gui" = "yes" ] || _gui_cppflags="-DwxUSE_GUI=0"
+
+if is_installed; then
+ _include_cppflags="-I${includedir}/wx-@WX_RELEASE@@WX_FLAVOUR@"
+else
+ _include_cppflags="-I${includedir} -I${prefix}/contrib/include"
+fi
+
+_cppflags=$(echo "-I${libdir}/wx/include/@TOOLCHAIN_FULLNAME@" $_include_cppflags "@WXDEBUG_DEFINE@" "@TOOLCHAIN_DEFS@" "@TOOLCHAIN_DLL_DEFS@" $_gui_cppflags "@WXCONFIG_INCLUDE@" "@WX_LARGEFILE_FLAGS@" "@GCC_PRAGMA_FLAGS@")
+
+# now without further ado, we can answer these too.
+[ -z "$output_option_cppflags" ] || echo $_cppflags
+[ -z "$output_option_cflags" ] || echo $_cppflags "@CODE_GEN_FLAGS@"
+[ -z "$output_option_cxxflags" ] || echo $_cppflags "@CODE_GEN_FLAGS@" "@CODE_GEN_FLAGS_CXX@"
+[ -z "$output_option_gl_libs" ] || echo $(lib_flags_for gl)
+[ -z "$output_option_linkdeps" ] || echo $link_deps
+
+if [ -n "$output_option_libs" ]; then
+
+ is_cross &&
+ [ "x$libdir" = "x/usr/${target}/lib" ] ||
+ [ "x$libdir" = "x/usr/lib" ] ||
+ _ldflags="-L$libdir"
+
+ is_installed || [ -n "$flag_option_no_rpath" ] || _rpath="@WXCONFIG_RPATH@"
+
+ echo $_ldflags "@LDFLAGS@" $_rpath $wx_libs "@DMALLOC_LIBS@"
+fi
+
+# And so that's it, we're done. Have a nice build.
+
+exit 0
+
+
projects / wxWidgets.git / blobdiff