+// Two status bar implementations are available under Win32: the generic one
+// or the wrapper around native control. For native look and feel the native
+// version should be used.
+//
+// Default is 1 for the platforms where native status bar is supported.
+//
+// Recommended setting: 1 (there is no advantage in using the generic one)
+#define wxUSE_NATIVE_STATUSBAR 1
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
+#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
+
+// wxNotebook is a control with several "tabs" located on one of its sides. It
+// may be used to logically organise the data presented to the user instead of
+// putting everything in one huge dialog. It replaces wxTabControl and related
+// classes of wxWin 1.6x.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTEBOOK 1
+
+// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_LISTBOOK 1
+
+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+
+// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TREEBOOK 1
+
+// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
+// tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLBOOK 1
+
+// wxTaskBarIcon is a small notification icon shown in the system toolbar or
+// dock.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be set to 0 if you don't need it)
+#define wxUSE_TASKBARICON 1
+
+// wxGrid class
+//
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
+//
+// Recommended setting: 1
+//
+#define wxUSE_GRID 1
+
+// wxMiniFrame class: a frame with narrow title bar
+//
+// Default is 1.
+//
+// Recommended setting: 1 (it doesn't cost almost anything)
+#define wxUSE_MINIFRAME 1
+
+// wxComboCtrl and related classes: combobox with custom popup window and
+// not necessarily a listbox.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
+// it used by wxComboBox
+#define wxUSE_COMBOCTRL 1
+
+// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
+// items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0, except where it is
+// needed as a base class for generic wxBitmapComboBox.
+#define wxUSE_ODCOMBOBOX 1
+
+// wxBitmapComboBox is a combobox that can have images in front of text items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0
+#define wxUSE_BITMAPCOMBOBOX 1
+
+// wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
+// up and down in it. It is also used as part of wxRearrangeDialog.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 (currently used only by
+// wxHeaderCtrl)
+#define wxUSE_REARRANGECTRL 1
+
+// ----------------------------------------------------------------------------
+// Miscellaneous GUI stuff
+// ----------------------------------------------------------------------------
+
+// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
+#define wxUSE_ACCEL 1
+
+// Hotkey support (currently Windows only)
+#define wxUSE_HOTKEY 1
+
+// Use wxCaret: a class implementing a "cursor" in a text control (called caret
+// under Windows).
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can be safely set to 0, not used by the library)
+#define wxUSE_CARET 1
+
+// Use wxDisplay class: it allows enumerating all displays on a system and
+// their geometries as well as finding the display on which the given point or
+// window lies.
+//
+// Default is 1.
+//
+// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
+#define wxUSE_DISPLAY 1
+
+// Miscellaneous geometry code: needed for Canvas library
+#define wxUSE_GEOMETRY 1
+
+// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
+// wxListCtrl.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (set it to 0 if you don't use any of the controls
+// enumerated above, then this class is mostly useless too)
+#define wxUSE_IMAGLIST 1
+
+// Use wxMenu, wxMenuBar, wxMenuItem.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (can't be disabled under MSW)
+#define wxUSE_MENUS 1
+
+// Use wxNotificationMessage.
+//
+// wxNotificationMessage allows to show non-intrusive messages to the user
+// using balloons, banners, popups or whatever is the appropriate method for
+// the current platform.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTIFICATION_MESSAGE 1
+
+// Use wxSashWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SASH 1
+
+// Use wxSplitterWindow class.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_SPLITTER 1
+
+// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLTIPS 1
+
+// wxValidator class and related methods
+#define wxUSE_VALIDATORS 1
+
+// Use reference counted ID management: this means that wxWidgets will track
+// the automatically allocated ids (those used when you use wxID_ANY when
+// creating a window, menu or toolbar item &c) instead of just supposing that
+// the program never runs out of them. This is mostly useful only under wxMSW
+// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
+// long-running programs can run into problems with ids reuse without this. On
+// the other platforms, where the ids have the full int range, this shouldn't
+// be necessary.
+#ifdef __WXMSW__
+#define wxUSE_AUTOID_MANAGEMENT 1
+#else
+#define wxUSE_AUTOID_MANAGEMENT 0
+#endif
+
+// ----------------------------------------------------------------------------
+// common dialogs
+// ----------------------------------------------------------------------------
+
+// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
+// file selector, printer dialog). Switching this off also switches off the
+// printing architecture and interactive wxPrinterDC.
+//
+// Default is 1
+//
+// Recommended setting: 1 (unless it really doesn't work)
+#define wxUSE_COMMON_DIALOGS 1
+
+// wxBusyInfo displays window with message when app is busy. Works in same way
+// as wxBusyCursor
+#define wxUSE_BUSYINFO 1
+
+// Use single/multiple choice dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_CHOICEDLG 1
+
+// Use colour picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_COLOURDLG 1
+
+// wxDirDlg class for getting a directory name from user
+#define wxUSE_DIRDLG 1
+
+// TODO: setting to choose the generic or native one
+
+// Use file open/save dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in many places in the library itself)
+#define wxUSE_FILEDLG 1
+
+// Use find/replace dialogs.
+//
+// Default is 1
+//
+// Recommended setting: 1 (but may be safely set to 0)
+#define wxUSE_FINDREPLDLG 1
+
+// Use font picker dialog
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_FONTDLG 1
+
+// Use wxMessageDialog and wxMessageBox.
+//
+// Default is 1
+//
+// Recommended setting: 1 (used in the library itself)
+#define wxUSE_MSGDLG 1
+
+// progress dialog class for lengthy operations
+#define wxUSE_PROGRESSDLG 1
+
+// support for startup tips (wxShowTip &c)
+#define wxUSE_STARTUP_TIPS 1
+
+// text entry dialog and wxGetTextFromUser function
+#define wxUSE_TEXTDLG 1
+
+// number entry dialog
+#define wxUSE_NUMBERDLG 1
+
+// splash screen class
+#define wxUSE_SPLASH 1
+
+// wizards
+#define wxUSE_WIZARDDLG 1
+
+// Compile in wxAboutBox() function showing the standard "About" dialog.
+//
+// Default is 1
+//
+// Recommended setting: 1 but can be set to 0 to save some space if you don't
+// use this function
+#define wxUSE_ABOUTDLG 1
+
+// ----------------------------------------------------------------------------
+// Metafiles support
+// ----------------------------------------------------------------------------
+
+// Windows supports the graphics format known as metafile which is, though not
+// portable, is widely used under Windows and so is supported by wxWin (under
+// Windows only, of course). Win16 (Win3.1) used the so-called "Window
+// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
+// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
+// default, WMFs will be used under Win16 and EMFs under Win32. This may be
+// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
+// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
+// in any metafile related classes at all.
+//
+// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
+//
+// Recommended setting: default or 0 for everything for portable programs.
+#define wxUSE_METAFILE 1
+#define wxUSE_ENH_METAFILE 1
+#define wxUSE_WIN_METAFILES_ALWAYS 0
+
+// ----------------------------------------------------------------------------
+// Big GUI components
+// ----------------------------------------------------------------------------
+
+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 1
+
+// Set to 0 to disable document/view architecture
+#define wxUSE_DOC_VIEW_ARCHITECTURE 1
+
+// Set to 0 to disable MDI document/view architecture
+//
+// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
+#define wxUSE_MDI_ARCHITECTURE 1
+
+// Set to 0 to disable print/preview architecture code
+#define wxUSE_PRINTING_ARCHITECTURE 1
+
+// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
+// much more.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
+// smaller library.
+#define wxUSE_HTML 1
+
+// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
+// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
+// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
+// will need to manually add opengl32.lib and glu32.lib to the list of
+// libraries linked with your program if you use OpenGL.
+//
+// Default is 0.
+//
+// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
+#define wxUSE_GLCANVAS 0
+
+// wxRichTextCtrl allows editing of styled text.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 if you want compile a
+// smaller library.
+#define wxUSE_RICHTEXT 1
+
+// ----------------------------------------------------------------------------
+// Data transfer
+// ----------------------------------------------------------------------------
+
+// Use wxClipboard class for clipboard copy/paste.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CLIPBOARD 1
+
+// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
+// drop
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DATAOBJ 1
+
+// Use wxDropTarget and wxDropSource classes for drag and drop (this is
+// different from "built in" drag and drop in wxTreeCtrl which is always
+// available). Requires wxUSE_DATAOBJ.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DRAG_AND_DROP 1
+
+// Use wxAccessible for enhanced and customisable accessibility.
+// Depends on wxUSE_OLE.
+//
+// Default is 0.
+//
+// Recommended setting (at present): 0
+#define wxUSE_ACCESSIBILITY 0
+
+// ----------------------------------------------------------------------------
+// miscellaneous settings
+// ----------------------------------------------------------------------------
+
+// wxSingleInstanceChecker class allows to verify at startup if another program
+// instance is running.
+//
+// Default is 1
+//
+// Recommended setting: 1 (the class is tiny, disabling it won't save much
+// space)
+#define wxUSE_SNGLINST_CHECKER 1
+
+#define wxUSE_DRAGIMAGE 1
+
+#define wxUSE_IPC 1
+ // 0 for no interprocess comms
+#define wxUSE_HELP 1
+ // 0 for no help facility
+
+// Should we use MS HTML help for wxHelpController? If disabled, neither
+// wxCHMHelpController nor wxBestHelpController are available.
+//
+// Default is 1 under MSW, 0 is always used for the other platforms.
+//
+// Recommended setting: 1, only set to 0 if you have trouble compiling
+// wxCHMHelpController (could be a problem with really ancient compilers)
+#define wxUSE_MS_HTML_HELP 1
+
+
+// Use wxHTML-based help controller?
+#define wxUSE_WXHTML_HELP 1
+
+#define wxUSE_CONSTRAINTS 1
+ // 0 for no window layout constraint system
+
+#define wxUSE_SPLINES 1
+ // 0 for no splines
+
+#define wxUSE_MOUSEWHEEL 1
+ // Include mouse wheel support
+
+// ----------------------------------------------------------------------------
+// wxDC classes for various output formats
+// ----------------------------------------------------------------------------
+
+// Set to 1 for PostScript device context.
+#define wxUSE_POSTSCRIPT 0
+
+// Set to 1 to use font metric files in GetTextExtent
+#define wxUSE_AFM_FOR_POSTSCRIPT 1
+
+// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
+// to create files in SVG (Scalable Vector Graphics) format.
+#define wxUSE_SVG 1
+
+// ----------------------------------------------------------------------------
+// other compiler (mis)features
+// ----------------------------------------------------------------------------
+
+// Set this to 0 if your compiler can't cope with omission of prototype
+// parameters.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (should never need to set this to 0)
+#define REMOVE_UNUSED_ARG 1
+
+// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
+// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
+//
+// Note that newer compilers (including VC++ 7.1 and later) don't support
+// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
+//
+// Default is 0.
+//
+// Recommended setting: 0, only set to 1 if you use a really old compiler
+#define wxUSE_IOSTREAMH 0
+
+// ----------------------------------------------------------------------------
+// image format support
+// ----------------------------------------------------------------------------
+
+// wxImage supports many different image formats which can be configured at
+// compile-time. BMP is always supported, others are optional and can be safely
+// disabled if you don't plan to use images in such format sometimes saving
+// substantial amount of code in the final library.
+//
+// Some formats require an extra library which is included in wxWin sources
+// which is mentioned if it is the case.
+
+// Set to 1 for wxImage support (recommended).
+#define wxUSE_IMAGE 1
+
+// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
+#define wxUSE_LIBPNG 1
+
+// Set to 1 for JPEG format support (requires libjpeg)
+#define wxUSE_LIBJPEG 1
+
+// Set to 1 for TIFF format support (requires libtiff)
+#define wxUSE_LIBTIFF 1
+
+// Set to 1 for TGA format support (loading only)
+#define wxUSE_TGA 1
+
+// Set to 1 for GIF format support
+#define wxUSE_GIF 1
+
+// Set to 1 for PNM format support
+#define wxUSE_PNM 1
+
+// Set to 1 for PCX format support
+#define wxUSE_PCX 1
+
+// Set to 1 for IFF format support (Amiga format)
+#define wxUSE_IFF 0
+
+// Set to 1 for XPM format support
+#define wxUSE_XPM 1
+
+// Set to 1 for MS Icons and Cursors format support
+#define wxUSE_ICO_CUR 1
+
+// Set to 1 to compile in wxPalette class
+#define wxUSE_PALETTE 1
+
+// ----------------------------------------------------------------------------
+// wxUniversal-only options
+// ----------------------------------------------------------------------------
+
+// Set to 1 to enable compilation of all themes, this is the default
+#define wxUSE_ALL_THEMES 1
+
+// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
+// is unset, if it is set these options are not used; notice that metal theme
+// uses Win32 one
+#define wxUSE_THEME_GTK 0
+#define wxUSE_THEME_METAL 0
+#define wxUSE_THEME_MONO 0
+#define wxUSE_THEME_WIN32 0
+
+
+/* --- end common options --- */
+
+/*
+ * Unix-specific options
+ */
+#define wxUSE_SELECT_DISPATCHER 1
+#define wxUSE_EPOLL_DISPATCHER 0
+
+#define wxUSE_UNICODE_UTF8 0
+#define wxUSE_UTF8_LOCALE_ONLY 0
+
+#endif // _WX_SETUP_H_
projects / wxWidgets.git / blobdiff