#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_
-/*
- * General features
- *
- */
+// ----------------------------------------------------------------------------
+// global settings
+// ----------------------------------------------------------------------------
-#define wxUSE_CONFIG 1
- // Use wxConfig, with CreateConfig in wxApp
+// define this to 0 when building wxBase library
+#define wxUSE_GUI 1
+
+// ----------------------------------------------------------------------------
+// compatibility settings
+// ----------------------------------------------------------------------------
#define WXWIN_COMPATIBILITY 0
// Compatibility with 1.68 API.
// the compatibility code is now very minimal so there
// is little advantage to setting it to 1.
+// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
+// but this is very dangerous because you can mistakenly pass an icon instead
+// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
+// because an icon is not a valid bitmap
+//
+// Starting from 2.1.12, you have the choice under this backwards compatible
+// behaviour (your code will still compile, but probably won't behave as
+// expected!) and not deriving wxIcon class from wxBitmap, but providing a
+// conversion ctor wxBitmap(const wxIcon&) instead.
+//
+// Recommended setting: 0
+#define wxICON_IS_BITMAP 0
+
+// ----------------------------------------------------------------------------
+// non GUI features selection
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
+// integer which is implemented in terms of native 64 bit integers if any or
+// uses emulation otherwise.
+//
+// This class is required by wxDateTime and so you should enable it if you want
+// to use wxDateTime. For most modern platforms, it will use the native 64 bit
+// integers in which case (almost) all of its functions are inline and it
+// almost does not take any space, so there should be no reason to switch it
+// off.
+//
+// Recommended setting: 1
+#define wxUSE_LONGLONG 1
+
+// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which
+// allow to manipulate dates, times and time intervals. wxDateTime replaces the
+// old wxTime and wxDate classes which are still provided for backwards
+// compatibility (and implemented in terms of wxDateTime).
+//
+// Note that this class is relatively new and is still officially in alpha
+// stage because some features are not yet (fully) implemented. It is already
+// quite useful though and should only be disabled if you are aiming at
+// absolutely minimal version of the library.
+//
+// Requires: wxUSE_LONGLONG
+//
+// Recommended setting: 1
+#define wxUSE_TIMEDATE 1
+
+// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
+// which allow the application to store its settings in the persistent
+// storage. Setting this to 1 will also enable on-demand creation of the
+// global config object in wxApp.
+//
+// See also wxUSE_CONFIG_NATIVE below.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG 1
+
+// If wxUSE_CONFIG is 1, you may choose to use either the native config
+// classes under Windows (using .INI files under Win16 and the registry under
+// Win32) or the portable text file format used by the config classes under
+// Unix.
+//
+// Default is 1 to use native classes. Note that you may still use
+// wxFileConfig even if you set this to 1 - just the config object created by
+// default for the applications needs will be a wxRegConfig or wxIniConfig and
+// not wxFileConfig.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG_NATIVE 1
+
+// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
+// to connect/disconnect from the network and be notified whenever the dial-up
+// network connection is established/terminated.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DIALUP_MANAGER 1
+
+// ----------------------------------------------------------------------------
+// Optional controls
+// ----------------------------------------------------------------------------
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
+// supports some features which might not be supported by the native wxToolBar
+// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
+// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
+#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
+#define wxUSE_TOOLBAR_SIMPLE 1
+
+// ----------------------------------------------------------------------------
+// Postscript support settings
+// ----------------------------------------------------------------------------
+
#define wxUSE_POSTSCRIPT 0
// 0 for no PostScript device context
#define wxUSE_AFM_FOR_POSTSCRIPT 0
#define wxUSE_CONSTRAINTS 1
// 0 for no window layout constraint system
-#define wxUSE_TIMEDATE 1
- // 0 for no wxTime/wxDate classes
-
#define wxUSE_CLIPBOARD 1
// 0 for no clipboard functions
#define wxUSE_DRAG_AND_DROP 1
// 0 for no drag and drop
-#define wxUSE_TOOLBAR 1
- // Define 1 to use toolbar classes
#define wxUSE_BUTTONBAR 1
// Define 1 to use buttonbar classes (enhanced toolbar
// for MS Windows)
// Define 1 to use radio button control
#define wxUSE_RADIOBTN 1
// Unfortunately someone introduced this one, too
+#define wxUSE_RADIOBOX 1
+ // And this... don't know which one is corect
#define wxUSE_SCROLLBAR 1
// Define 1 to compile contributed wxScrollBar class
#define wxUSE_SPINBTN 1
// Define 1 to compile spin button
-// use wxStaticLine class (separator line in the dialog)?
+#define wxUSE_SPINCTRL 1
+ // Define 1 to use wxSpinCtrl class
+
#define wxUSE_STATLINE 1
+ // use wxStaticLine class
#define wxUSE_CHECKLISTBOX 1
// Define 1 to compile check listbox
#define wxUSE_CARET 1
// Define 1 to use wxCaret class
+
+#define wxUSE_SLIDER 1
+ // Define 1 to use wxSlider class
+
+#define wxUSE_NEW_GRID 1
+ // Define 1 to use the new wxGrid class
+ // (still under development, define 0 to
+ // use existing wxGrid class)
#define wxUSE_XPM_IN_MSW 1
// Define 1 to support the XPM package in wxBitmap.
#define wxUSE_IMAGE_LOADING_IN_MSW 1
#define wxUSE_WX_RESOURCES 1
// Use .wxr resource mechanism (requires PrologIO library)
-// support for startup tips (wxShowTip &c)
#define wxUSE_STARTUP_TIPS 1
-
-// BC++/Win16 can't cope with the amount of data in resource.cpp
-#if defined(__WIN16__) && defined(__BORLANDC__)
-#undef wxUSE_WX_RESOURCES
-#define wxUSE_WX_RESOURCES 0
-#endif
+ // support for startup tips (wxShowTip &c)
#define wxUSE_DOC_VIEW_ARCHITECTURE 1
// Set to 0 to disable document/view architecture
// if alignment is an issue.
#define wxUSE_DEBUG_CONTEXT 1
// If 1, enables wxDebugContext, for
- // writing error messages to file, etc.
+ // writing error messages to file, etc.
// If __WXDEBUG__ is not defined, will still use
// normal memory operators.
// It's recommended to set this to 1,
#define wxUSE_ODBC 0
// Define 1 to use ODBC classes
+#define wxODBC_FWD_ONLY_CURSORS 1
+ // Some databases/ODBC drivers only allow forward scrolling cursors.
+ // Unless you specifically want to use backward scrolling
+ // cursors, and you know that all of the databases/ODBC drivers
+ // that you will use these odbc classes with allow backward
+ // scrolling cursors, this setting should remain set to 1
+ // for maximum database/driver compatibilty
+
#ifndef __MWERKS__
#define wxUSE_IOSTREAMH 1
#else
// Use PNG bitmap/image code
#define wxUSE_LIBJPEG 1
// Use JPEG bitmap/image code
+#define wxUSE_LIBTIFF 0
+ // Use TIFF bitmap/image code
#define wxUSE_GIF 1
// Use GIF bitmap/image code
#define wxUSE_PNM 1
// wxWindow::SetToolTip() method
#define wxUSE_SOCKETS 1
// Set to 1 to use socket classes
-#define wxUSE_HTML 0
+#define wxUSE_HTML 1
// Set to 1 to use wxHTML sub-library
-#define wxUSE_FS_ZIP 0
-#define wxUSE_FS_INET 0 // Set to 1 to enable virtual file systems
+#define wxUSE_FS_ZIP 1
+#define wxUSE_FS_INET 1 // Set to 1 to enable virtual file systems
-#define wxUSE_BUSYINFO 0
+#define wxUSE_BUSYINFO 1
// wxBusyInfo displays window with message
// when app is busy. Works in same way as
// wxBusyCursor
-#define wxUSE_ZIPSTREAM 0
+#define wxUSE_ZIPSTREAM 1
// input stream for reading from zip archives
/*
// text entry dialog and wxGetTextFromUser function
#define wxUSE_TEXTDLG 1
-// wxToolBar class
-#define wxUSE_TOOLBAR 1
-
// wxStatusBar class
#define wxUSE_STATUSBAR 1
// See note above about using FAFA and CTL3D.
#endif
+// can we use RICHEDIT control?
+#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__)
+#define wxUSE_RICHEDIT 1
+#else
+#define wxUSE_RICHEDIT 0
+#endif
+
#define wxUSE_COMMON_DIALOGS 1
// On rare occasions (e.g. using DJGPP) may want
// to omit common dialogs
#define wxUSE_NATIVE_STATUSBAR 1
// Set to 0 to use cross-platform wxStatusBar
-#define wxUSE_DBWIN32 1
- // Use Andrew Tucker's OutputDebugString implementation
- // (required on Win95 only). See utils.cpp.
/*
* Any platform
// complains about deallocating
// arrays of wxPoints if wxPoint is a class.
-#if (!defined(WIN32) && !defined(__WIN32__)) || defined(__GNUWIN32__)
+#if defined(__MINGW32__) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
+#ifndef wxUSE_NORLANDER_HEADERS
+# define wxUSE_NORLANDER_HEADERS 1
+#endif
+#endif
+
+#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !defined(wxUSE_NORLANDER_HEADERS))
// Can't use OLE drag and drop in Windows 3.1 because we don't know how
// to implement UUIDs
// GnuWin32 doesn't have appropriate headers for e.g. IUnknown.
#undef wxUSE_THREADS
#define wxUSE_THREADS 0
-#undef wxUSE_DBWIN32
-#define wxUSE_DBWIN32 0
-
#undef wxUSE_OWNER_DRAWN
#define wxUSE_OWNER_DRAWN 0
#endif
#undef wxUSE_THREADS
#define wxUSE_THREADS 0
-#undef wxUSE_DBWIN32
-#define wxUSE_DBWIN32 0
-
#undef wxUSE_ODBC
#define wxUSE_ODBC 0
#endif
-#if defined(__WXMSW__) && defined(__BORLANDC__)
+// BC++/Win16 can't cope with the amount of data in resource.cpp
+#if defined(__WIN16__) && defined(__BORLANDC__)
+#undef wxUSE_WX_RESOURCES
+#define wxUSE_WX_RESOURCES 0
+
#undef wxUSE_ODBC
-#define wxUSE_ODBC 0
+#define wxUSE_ODBC 0
+#endif
+
+#if defined(__WXMSW__) && defined(__WATCOMC__)
+#undef wxUSE_LIBJPEG
+#define wxUSE_LIBJPEG 0
#endif
#if defined(__WXMSW__) && !defined(__WIN32__)
+#undef wxUSE_SOCKETS
+#define wxUSE_SOCKETS 0
+
#undef wxUSE_THREADS
#define wxUSE_THREADS 0
#undef wxUSE_TOOLTIPS
#define wxUSE_TOOLTIPS 0
+#undef wxUSE_SPINCTRL
+#define wxUSE_SPINCTRL 0
+
+#undef wxUSE_SPINBTN
+#define wxUSE_SPINBTN 0
+
#undef wxUSE_LIBPNG
#define wxUSE_LIBPNG 0
projects / wxWidgets.git / blobdiff