dnl ---------------------------------------------------------------------------
-dnl Macros for wxWindows detection. Typically used in configure.in as:
+dnl Author: wxWidgets development team,
+dnl Francesco Montorsi,
+dnl Bob McCown (Mac-testing)
+dnl Creation date: 24/11/2001
+dnl RCS-ID: $Id$
+dnl ---------------------------------------------------------------------------
+
+dnl ===========================================================================
+dnl Table of Contents of this macro file:
+dnl -------------------------------------
+dnl
+dnl SECTION A: wxWidgets main macros
+dnl - WX_CONFIG_OPTIONS
+dnl - WX_CONFIG_CHECK
+dnl - WXRC_CHECK
+dnl - WX_STANDARD_OPTIONS
+dnl - WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
+dnl - WX_DETECT_STANDARD_OPTION_VALUES
+dnl
+dnl SECTION B: wxWidgets-related utilities
+dnl - WX_LIKE_LIBNAME
+dnl - WX_ARG_ENABLE_YESNOAUTO
+dnl - WX_ARG_WITH_YESNOAUTO
+dnl
+dnl SECTION C: messages to the user
+dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG
+dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
+dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_END
+dnl - WX_BOOLOPT_SUMMARY
+dnl
+dnl The special "WX_DEBUG_CONFIGURE" variable can be set to 1 to enable extra
+dnl debug output on stdout from these macros.
+dnl ===========================================================================
+
+
+dnl ---------------------------------------------------------------------------
+dnl Macros for wxWidgets detection. Typically used in configure.in as:
dnl
dnl AC_ARG_ENABLE(...)
dnl AC_ARG_WITH(...)
dnl ...
-dnl AM_OPTIONS_WXCONFIG
+dnl WX_CONFIG_OPTIONS
dnl ...
dnl ...
-dnl AM_PATH_WXCONFIG(2.6.0, wxWin=1)
+dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1])
dnl if test "$wxWin" != 1; then
dnl AC_MSG_ERROR([
-dnl wxWindows must be installed on your system
+dnl wxWidgets must be installed on your system
dnl but wx-config script couldn't be found.
dnl
dnl Please check that wx-config is in path, the directory
-dnl where wxWindows libraries are installed (returned by
+dnl where wxWidgets libraries are installed (returned by
dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
-dnl equivalent variable and wxWindows version is 2.3.4 or above.
+dnl equivalent variable and wxWidgets version is 2.3.4 or above.
dnl ])
dnl fi
dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
dnl
dnl LIBS="$LIBS $WX_LIBS"
+dnl
+dnl If you want to support standard --enable-debug/unicode/shared options, you
+dnl may do the following:
+dnl
+dnl ...
+dnl AC_CANONICAL_SYSTEM
+dnl
+dnl # define configure options
+dnl WX_CONFIG_OPTIONS
+dnl WX_STANDARD_OPTIONS([debug,unicode,shared,toolkit,wxshared])
+dnl
+dnl # basic configure checks
+dnl ...
+dnl
+dnl # we want to always have DEBUG==WX_DEBUG and UNICODE==WX_UNICODE
+dnl WX_DEBUG=$DEBUG
+dnl WX_UNICODE=$UNICODE
+dnl
+dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
+dnl WX_CONFIG_CHECK([2.8.0], [wxWin=1],,[html,core,net,base],[$WXCONFIG_FLAGS])
+dnl WX_DETECT_STANDARD_OPTION_VALUES
+dnl
+dnl # write the output files
+dnl AC_CONFIG_FILES([Makefile ...])
+dnl AC_OUTPUT
+dnl
+dnl # optional: just to show a message to the user
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
+dnl
dnl ---------------------------------------------------------------------------
+
dnl ---------------------------------------------------------------------------
-dnl AM_OPTIONS_WXCONFIG
+dnl WX_CONFIG_OPTIONS
dnl
dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and
dnl --wx-config command line options
dnl ---------------------------------------------------------------------------
-AC_DEFUN([AM_OPTIONS_WXCONFIG],
+AC_DEFUN([WX_CONFIG_OPTIONS],
[
AC_ARG_WITH(wxdir,
- [ --with-wxdir=PATH Use uninstalled version of wxWindows in PATH],
+ [ --with-wxdir=PATH Use uninstalled version of wxWidgets in PATH],
[ wx_config_name="$withval/wx-config"
wx_config_args="--inplace"])
AC_ARG_WITH(wx-config,
[ --with-wx-config=CONFIG wx-config script to use (optional)],
wx_config_name="$withval" )
AC_ARG_WITH(wx-prefix,
- [ --with-wx-prefix=PREFIX Prefix where wxWindows is installed (optional)],
+ [ --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)],
wx_config_prefix="$withval", wx_config_prefix="")
AC_ARG_WITH(wx-exec-prefix,
[ --with-wx-exec-prefix=PREFIX
- Exec prefix where wxWindows is installed (optional)],
+ Exec prefix where wxWidgets is installed (optional)],
wx_config_exec_prefix="$withval", wx_config_exec_prefix="")
])
+dnl Helper macro for checking if wx version is at least $1.$2.$3, set's
+dnl wx_ver_ok=yes if it is:
+AC_DEFUN([_WX_PRIVATE_CHECK_VERSION],
+[
+ wx_ver_ok=""
+ if test "x$WX_VERSION" != x ; then
+ if test $wx_config_major_version -gt $1; then
+ wx_ver_ok=yes
+ else
+ if test $wx_config_major_version -eq $1; then
+ if test $wx_config_minor_version -gt $2; then
+ wx_ver_ok=yes
+ else
+ if test $wx_config_minor_version -eq $2; then
+ if test $wx_config_micro_version -ge $3; then
+ wx_ver_ok=yes
+ fi
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
dnl ---------------------------------------------------------------------------
-dnl AM_PATH_WXCONFIG(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
+dnl WX_CONFIG_CHECK(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
dnl [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS]]]])
dnl
-dnl Test for wxWindows, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
-dnl (the latter is for static linking against wxWindows). Set WX_CONFIG_NAME
+dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
+dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME
dnl environment variable to override the default name of the wx-config script
dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this
dnl case the macro won't even waste time on tests for its existence.
dnl
dnl Optional WX-LIBS argument contains comma- or space-separated list of
-dnl wxWindows libraries to link against (it may include contrib libraries). If
-dnl it is not specified then WX_LIBS and WX_LIBS_STATIC will contain flags to
-dnl link with all of the core wxWindows libraries.
+dnl wxWidgets libraries to link against. If it is not specified then WX_LIBS
+dnl and WX_LIBS_STATIC will contain flags to link with all of the core
+dnl wxWidgets libraries.
dnl
dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config
dnl invocation command in present. It can be used to fine-tune lookup of
dnl best wxWidgets build available.
dnl
dnl Example use:
-dnl AM_PATH_WXCONFIG([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
+dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
dnl [--unicode --debug])
dnl ---------------------------------------------------------------------------
dnl
dnl Get the cflags and libraries from the wx-config script
dnl
-AC_DEFUN([AM_PATH_WXCONFIG],
+AC_DEFUN([WX_CONFIG_CHECK],
[
dnl do we have wx-config name: it can be wx-config or wxd-config or ...
if test x${WX_CONFIG_NAME+set} != xset ; then
min_wx_version=ifelse([$1], ,2.2.1,$1)
if test -z "$5" ; then
- AC_MSG_CHECKING([for wxWindows version >= $min_wx_version])
+ AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version])
else
- AC_MSG_CHECKING([for wxWindows version >= $min_wx_version ($5)])
+ AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)])
fi
- WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5 $4"
+ dnl don't add the libraries ($4) to this variable as this would result in
+ dnl an error when it's used with --version below
+ WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5"
WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null`
wx_config_major_version=`echo $WX_VERSION | \
wx_requested_micro_version=`echo $min_wx_version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- wx_ver_ok=""
- if test "x$WX_VERSION" != x ; then
- if test $wx_config_major_version -gt $wx_requested_major_version; then
- wx_ver_ok=yes
- else
- if test $wx_config_major_version -eq $wx_requested_major_version; then
- if test $wx_config_minor_version -gt $wx_requested_minor_version; then
- wx_ver_ok=yes
- else
- if test $wx_config_minor_version -eq $wx_requested_minor_version; then
- if test $wx_config_micro_version -ge $wx_requested_micro_version; then
- wx_ver_ok=yes
- fi
- fi
- fi
- fi
- fi
- fi
+ _WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version],
+ [$wx_requested_minor_version],
+ [$wx_requested_micro_version])
if test -n "$wx_ver_ok"; then
-
AC_MSG_RESULT(yes (version $WX_VERSION))
- WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs`
+ WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs $4`
dnl is this even still appropriate? --static is a real option now
dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is
dnl what the user actually wants, making this redundant at best.
dnl For now keep it in case anyone actually used it in the past.
- AC_MSG_CHECKING([for wxWindows static library])
- WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs 2>/dev/null`
+ AC_MSG_CHECKING([for wxWidgets static library])
+ WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs $4 2>/dev/null`
if test "x$WX_LIBS_STATIC" = "x"; then
AC_MSG_RESULT(no)
else
fi
fi
+ dnl starting with version 2.7.0 wx-config has --rescomp option
+ wx_has_rescomp=""
+ if test $wx_config_major_version -gt 2; then
+ wx_has_rescomp=yes
+ else
+ if test $wx_config_major_version -eq 2; then
+ if test $wx_config_minor_version -ge 7; then
+ wx_has_rescomp=yes
+ fi
+ fi
+ fi
+ if test "x$wx_has_rescomp" = x ; then
+ dnl cannot give any useful info for resource compiler
+ WX_RESCOMP=
+ else
+ WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp`
+ fi
+
if test "x$wx_has_cppflags" = x ; then
dnl no choice but to define all flags like CFLAGS
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
+ WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
WX_CPPFLAGS=$WX_CFLAGS
WX_CXXFLAGS=$WX_CFLAGS
WX_CXXFLAGS_ONLY=$WX_CFLAGS
else
dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS
- WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags`
- WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags`
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
+ WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags $4`
+ WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags $4`
+ WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"`
WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"`
WX_CXXFLAGS=""
WX_LIBS=""
WX_LIBS_STATIC=""
- ifelse([$3], , :, [$3])
+ WX_RESCOMP=""
+
+ if test ! -z "$5"; then
+
+ wx_error_message="
+ The configuration you asked for $PACKAGE_NAME requires a wxWidgets
+ build with the following settings:
+ $5
+ but such build is not available.
+
+ To see the wxWidgets builds available on this system, please use
+ 'wx-config --list' command. To use the default build, returned by
+ 'wx-config --selected-config', use the options with their 'auto'
+ default values."
+
+ fi
+
+ wx_error_message="
+ The requested wxWidgets build couldn't be found.
+ $wx_error_message
+
+ If you still get this error, then check that 'wx-config' is
+ in path, the directory where wxWidgets libraries are installed
+ (returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH
+ or equivalent variable and wxWidgets version is $1 or above."
+
+ ifelse([$3], , AC_MSG_ERROR([$wx_error_message]), [$3])
fi
else
WX_CXXFLAGS=""
WX_LIBS=""
WX_LIBS_STATIC=""
+ WX_RESCOMP=""
+
ifelse([$3], , :, [$3])
fi
AC_SUBST(WX_LIBS)
AC_SUBST(WX_LIBS_STATIC)
AC_SUBST(WX_VERSION)
+ AC_SUBST(WX_RESCOMP)
+
+ dnl need to export also WX_VERSION_MINOR and WX_VERSION_MAJOR symbols
+ dnl to support wxpresets bakefiles (we export also WX_VERSION_MICRO for completeness):
+ WX_VERSION_MAJOR="$wx_config_major_version"
+ WX_VERSION_MINOR="$wx_config_minor_version"
+ WX_VERSION_MICRO="$wx_config_micro_version"
+ AC_SUBST(WX_VERSION_MAJOR)
+ AC_SUBST(WX_VERSION_MINOR)
+ AC_SUBST(WX_VERSION_MICRO)
+])
+
+dnl ---------------------------------------------------------------------------
+dnl Get information on the wxrc program for making C++, Python and xrs
+dnl resource files.
+dnl
+dnl AC_ARG_ENABLE(...)
+dnl AC_ARG_WITH(...)
+dnl ...
+dnl WX_CONFIG_OPTIONS
+dnl ...
+dnl WX_CONFIG_CHECK(2.6.0, wxWin=1)
+dnl if test "$wxWin" != 1; then
+dnl AC_MSG_ERROR([
+dnl wxWidgets must be installed on your system
+dnl but wx-config script couldn't be found.
+dnl
+dnl Please check that wx-config is in path, the directory
+dnl where wxWidgets libraries are installed (returned by
+dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
+dnl equivalent variable and wxWidgets version is 2.6.0 or above.
+dnl ])
+dnl fi
+dnl
+dnl WXRC_CHECK([HAVE_WXRC=1], [HAVE_WXRC=0])
+dnl if test "x$HAVE_WXRC" != x1; then
+dnl AC_MSG_ERROR([
+dnl The wxrc program was not installed or not found.
+dnl
+dnl Please check the wxWidgets installation.
+dnl ])
+dnl fi
+dnl
+dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
+dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
+dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
+dnl
+dnl LDFLAGS="$LDFLAGS $WX_LIBS"
+dnl ---------------------------------------------------------------------------
+
+dnl ---------------------------------------------------------------------------
+dnl WXRC_CHECK([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl
+dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS
+dnl resources. The variable WXRC will be set and substituted in the configure
+dnl script and Makefiles.
+dnl
+dnl Example use:
+dnl WXRC_CHECK([wxrc=1], [wxrc=0])
+dnl ---------------------------------------------------------------------------
+
+dnl
+dnl wxrc program from the wx-config script
+dnl
+AC_DEFUN([WXRC_CHECK],
+[
+ AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler])
+
+ if test "x$WX_CONFIG_NAME" = x; then
+ AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.])
+ else
+
+ AC_MSG_CHECKING([for wxrc])
+
+ if test "x$WXRC" = x ; then
+ dnl wx-config --utility is a new addition to wxWidgets:
+ _WX_PRIVATE_CHECK_VERSION(2,5,3)
+ if test -n "$wx_ver_ok"; then
+ WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc`
+ fi
+ fi
+
+ if test "x$WXRC" = x ; then
+ AC_MSG_RESULT([not found])
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT([$WXRC])
+ ifelse([$1], , :, [$1])
+ fi
+
+ AC_SUBST(WXRC)
+ fi
+])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_LIKE_LIBNAME([output-var] [prefix], [name])
+dnl
+dnl Sets the "output-var" variable to the name of a library named with same
+dnl wxWidgets rule.
+dnl E.g. for output-var=='lib', name=='test', prefix='mine', sets
+dnl the $lib variable to:
+dnl 'mine_gtk2ud_test-2.8'
+dnl if WX_PORT=gtk2, WX_UNICODE=1, WX_DEBUG=1 and WX_RELEASE=28
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_LIKE_LIBNAME],
+ [
+ wx_temp="$2""_""$WX_PORT"
+
+ dnl add the [u][d] string
+ if test "$WX_UNICODE" = "1"; then
+ wx_temp="$wx_temp""u"
+ fi
+ if test "$WX_DEBUG" = "1"; then
+ wx_temp="$wx_temp""d"
+ fi
+
+ dnl complete the name of the lib
+ wx_temp="$wx_temp""_""$3""-$WX_VERSION_MAJOR.$WX_VERSION_MINOR"
+
+ dnl save it in the user's variable
+ $1=$wx_temp
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_ARG_ENABLE_YESNOAUTO/WX_ARG_WITH_YESNOAUTO
+dnl
+dnl Two little custom macros which define the ENABLE/WITH configure arguments.
+dnl Macro arguments:
+dnl $1 = the name of the --enable / --with feature
+dnl $2 = the name of the variable associated
+dnl $3 = the description of that feature
+dnl $4 = the default value for that feature
+dnl $5 = additional action to do in case option is given with "yes" value
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_ARG_ENABLE_YESNOAUTO],
+ [AC_ARG_ENABLE($1,
+ AC_HELP_STRING([--enable-$1], [$3 (default is $4)]),
+ [], [enableval="$4"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --enable-$1 option])
+ if test "$enableval" = "yes" ; then
+ AC_MSG_RESULT([yes])
+ $2=1
+ $5
+ elif test "$enableval" = "no" ; then
+ AC_MSG_RESULT([no])
+ $2=0
+ elif test "$enableval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ $2="auto"
+ else
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: yes, no, auto)
+ ])
+ fi
+ ])
+
+AC_DEFUN([WX_ARG_WITH_YESNOAUTO],
+ [AC_ARG_WITH($1,
+ AC_HELP_STRING([--with-$1], [$3 (default is $4)]),
+ [], [withval="$4"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --with-$1 option])
+ if test "$withval" = "yes" ; then
+ AC_MSG_RESULT([yes])
+ $2=1
+ $5
+ dnl NB: by default we don't allow --with-$1=no option
+ dnl since it does not make much sense !
+ elif test "$6" = "1" -a "$withval" = "no" ; then
+ AC_MSG_RESULT([no])
+ $2=0
+ elif test "$withval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ $2="auto"
+ else
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: yes, auto)
+ ])
+ fi
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl WX_STANDARD_OPTIONS([options-to-add])
+dnl
+dnl Adds to the configure script one or more of the following options:
+dnl --enable-[debug|unicode|shared|wxshared|wxdebug]
+dnl --with-[gtk|msw|motif|x11|mac|mgl|dfb]
+dnl --with-wxversion
+dnl Then checks for their presence and eventually set the DEBUG, UNICODE, SHARED,
+dnl PORT, WX_SHARED, WX_DEBUG, variables to one of the "yes", "no", "auto" values.
+dnl
+dnl Note that e.g. UNICODE != WX_UNICODE; the first is the value of the
+dnl --enable-unicode option (in boolean format) while the second indicates
+dnl if wxWidgets was built in Unicode mode (and still is in boolean format).
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_STANDARD_OPTIONS],
+ [
+
+ dnl the following lines will expand to WX_ARG_ENABLE_YESNOAUTO calls if and only if
+ dnl the $1 argument contains respectively the debug,unicode or shared options.
+
+ dnl be careful here not to set debug flag if only "wxdebug" was specified
+ ifelse(regexp([$1], [\bdebug]), [-1],,
+ [WX_ARG_ENABLE_YESNOAUTO([debug], [DEBUG], [Build in debug mode], [auto])])
+
+ ifelse(index([$1], [unicode]), [-1],,
+ [WX_ARG_ENABLE_YESNOAUTO([unicode], [UNICODE], [Build in Unicode mode], [auto])])
+
+ ifelse(regexp([$1], [\bshared]), [-1],,
+ [WX_ARG_ENABLE_YESNOAUTO([shared], [SHARED], [Build as shared library], [auto])])
+
+ dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-toolkit since it's an option
+ dnl which must be able to accept the auto|gtk1|gtk2|msw|... values
+ ifelse(index([$1], [toolkit]), [-1],,
+ [
+ AC_ARG_WITH([toolkit],
+ AC_HELP_STRING([--with-toolkit],
+ [Build against a specific wxWidgets toolkit (default is auto)]),
+ [], [withval="auto"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --with-toolkit option])
+ if test "$withval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ TOOLKIT="auto"
+ else
+ TOOLKIT="$withval"
+
+ dnl PORT must be one of the allowed values
+ if test "$TOOLKIT" != "gtk1" -a "$TOOLKIT" != "gtk2" -a \
+ "$TOOLKIT" != "msw" -a "$TOOLKIT" != "motif" -a \
+ "$TOOLKIT" != "x11" -a "$TOOLKIT" != "mac" -a \
+ "$TOOLKIT" != "mgl" -a "$TOOLKIT" != "dfb" ; then
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: auto, gtk1, gtk2, msw, motif, x11, mac, mgl, dfb)
+ ])
+ fi
+
+ AC_MSG_RESULT([$TOOLKIT])
+ fi
+ ])
+
+ dnl ****** IMPORTANT *******
+ dnl Unlike for the UNICODE setting, you can build your program in
+ dnl shared mode against a static build of wxWidgets. Thus we have the
+ dnl following option which allows these mixtures. E.g.
+ dnl
+ dnl ./configure --disable-shared --with-wxshared
+ dnl
+ dnl will build your library in static mode against the first available
+ dnl shared build of wxWidgets.
+ dnl
+ dnl Note that's not possible to do the viceversa:
+ dnl
+ dnl ./configure --enable-shared --without-wxshared
+ dnl
+ dnl Doing so you would try to build your library in shared mode against a static
+ dnl build of wxWidgets. This is not possible (you would mix PIC and non PIC code) !
+ dnl A check for this combination of options is in WX_DETECT_STANDARD_OPTION_VALUES
+ dnl (where we know what 'auto' should be expanded to).
+ dnl
+ dnl If you try to build something in ANSI mode against a UNICODE build
+ dnl of wxWidgets or in RELEASE mode against a DEBUG build of wxWidgets,
+ dnl then at best you'll get ton of linking errors !
+ dnl ************************
+
+ ifelse(index([$1], [wxshared]), [-1],,
+ [
+ WX_ARG_WITH_YESNOAUTO(
+ [wxshared], [WX_SHARED],
+ [Force building against a shared build of wxWidgets, even if --disable-shared is given],
+ [auto], [], [1])
+ ])
+
+ dnl Just like for SHARED and WX_SHARED it may happen that some adventurous
+ dnl peoples will want to mix a wxWidgets release build with a debug build of
+ dnl his app/lib. So, we have both DEBUG and WX_DEBUG variables.
+ ifelse(index([$1], [wxdebug]), [-1],,
+ [
+ WX_ARG_WITH_YESNOAUTO(
+ [wxdebug], [WX_DEBUG],
+ [Force building against a debug build of wxWidgets, even if --disable-debug is given],
+ [auto], [], [1])
+ ])
+
+ dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-wxversion since it's an option
+ dnl which accepts the "auto|2.6|2.7|2.8|2.9|3.0" etc etc values
+ ifelse(index([$1], [wxversion]), [-1],,
+ [
+ AC_ARG_WITH([wxversion],
+ AC_HELP_STRING([--with-wxversion],
+ [Build against a specific version of wxWidgets (default is auto)]),
+ [], [withval="auto"])
+
+ dnl Show a message to the user about this option
+ AC_MSG_CHECKING([for the --with-wxversion option])
+ if test "$withval" = "auto" ; then
+ AC_MSG_RESULT([will be automatically detected])
+ WX_RELEASE="auto"
+ else
+
+ wx_requested_major_version=`echo $withval | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
+ wx_requested_minor_version=`echo $withval | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
+
+ dnl both vars above must be exactly 1 digit
+ if test "${#wx_requested_major_version}" != "1" -o \
+ "${#wx_requested_minor_version}" != "1" ; then
+ AC_MSG_ERROR([
+ Unrecognized option value (allowed values: auto, 2.6, 2.7, 2.8, 2.9, 3.0)
+ ])
+ fi
+
+ WX_RELEASE="$wx_requested_major_version"".""$wx_requested_minor_version"
+ AC_MSG_RESULT([$WX_RELEASE])
+ fi
+ ])
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] DEBUG: $DEBUG, WX_DEBUG: $WX_DEBUG"
+ echo "[[dbg]] UNICODE: $UNICODE, WX_UNICODE: $WX_UNICODE"
+ echo "[[dbg]] SHARED: $SHARED, WX_SHARED: $WX_SHARED"
+ echo "[[dbg]] TOOLKIT: $TOOLKIT, WX_TOOLKIT: $WX_TOOLKIT"
+ echo "[[dbg]] VERSION: $VERSION, WX_RELEASE: $WX_RELEASE"
+ fi
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
+dnl
+dnl Sets the WXCONFIG_FLAGS string using the SHARED,DEBUG,UNICODE variable values
+dnl which are different from "auto".
+dnl Thus this macro needs to be called only once all options have been set.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS],
+ [
+ if test "$WX_SHARED" = "1" ; then
+ WXCONFIG_FLAGS="--static=no "
+ elif test "$WX_SHARED" = "0" ; then
+ WXCONFIG_FLAGS="--static=yes "
+ fi
+
+ if test "$WX_DEBUG" = "1" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=yes "
+ elif test "$WX_DEBUG" = "0" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=no "
+ fi
+
+ dnl The user should have set WX_UNICODE=UNICODE
+ if test "$WX_UNICODE" = "1" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=yes "
+ elif test "$WX_UNICODE" = "0" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=no "
+ fi
+
+ if test "$TOOLKIT" != "auto" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--toolkit=$TOOLKIT "
+ fi
+
+ if test "$WX_RELEASE" != "auto" ; then
+ WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--version=$WX_RELEASE "
+ fi
+
+ dnl strip out the last space of the string
+ WXCONFIG_FLAGS=${WXCONFIG_FLAGS% }
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] WXCONFIG_FLAGS: $WXCONFIG_FLAGS"
+ fi
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl _WX_SELECTEDCONFIG_CHECKFOR([RESULTVAR], [STRING], [MSG]
+dnl [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl
+dnl Outputs the given MSG. Then searches the given STRING in the wxWidgets
+dnl additional CPP flags and put the result of the search in WX_$RESULTVAR
+dnl also adding the "yes" or "no" message result to MSG.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([_WX_SELECTEDCONFIG_CHECKFOR],
+ [
+ if test "$$1" = "auto" ; then
+
+ dnl The user does not have particular preferences for this option;
+ dnl so we will detect the wxWidgets relative build setting and use it
+ AC_MSG_CHECKING([$3])
+
+ dnl set WX_$1 variable to 1 if the $WX_SELECTEDCONFIG contains the $2
+ dnl string or to 0 otherwise.
+ dnl NOTE: 'expr match STRING REGEXP' cannot be used since on Mac it
+ dnl doesn't work; we use 'expr STRING : REGEXP' instead
+ WX_$1=$(expr "$WX_SELECTEDCONFIG" : ".*$2.*")
+
+ if test "$WX_$1" != "0"; then
+ WX_$1=1
+ AC_MSG_RESULT([yes])
+ ifelse([$4], , :, [$4])
+ else
+ WX_$1=0
+ AC_MSG_RESULT([no])
+ ifelse([$5], , :, [$5])
+ fi
+ else
+
+ dnl Use the setting given by the user
+ WX_$1=$$1
+ fi
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_DETECT_STANDARD_OPTION_VALUES
+dnl
+dnl Detects the values of the following variables:
+dnl 1) WX_RELEASE
+dnl 2) WX_UNICODE
+dnl 3) WX_DEBUG
+dnl 4) WX_SHARED (and also WX_STATIC)
+dnl 5) WX_PORT
+dnl from the previously selected wxWidgets build; this macro in fact must be
+dnl called *after* calling the WX_CONFIG_CHECK macro.
+dnl
+dnl Note that the WX_VERSION_MAJOR, WX_VERSION_MINOR symbols are already set
+dnl by WX_CONFIG_CHECK macro
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_DETECT_STANDARD_OPTION_VALUES],
+ [
+ dnl IMPORTANT: WX_VERSION contains all three major.minor.micro digits,
+ dnl while WX_RELEASE only the major.minor ones.
+ WX_RELEASE="$WX_VERSION_MAJOR""$WX_VERSION_MINOR"
+ if test $WX_RELEASE -lt 26 ; then
+
+ AC_MSG_ERROR([
+ Cannot detect the wxWidgets configuration for the selected wxWidgets build
+ since its version is $WX_VERSION < 2.6.0; please install a newer
+ version of wxWidgets.
+ ])
+ fi
+
+ dnl The wx-config we are using understands the "--selected_config"
+ dnl option which returns an easy-parseable string !
+ WX_SELECTEDCONFIG=$($WX_CONFIG_WITH_ARGS --selected_config)
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] Using wx-config --selected-config"
+ echo "[[dbg]] WX_SELECTEDCONFIG: $WX_SELECTEDCONFIG"
+ fi
+
+
+ dnl we could test directly for WX_SHARED with a line like:
+ dnl _WX_SELECTEDCONFIG_CHECKFOR([SHARED], [shared],
+ dnl [if wxWidgets was built in SHARED mode])
+ dnl but wx-config --selected-config DOES NOT outputs the 'shared'
+ dnl word when wx was built in shared mode; it rather outputs the
+ dnl 'static' word when built in static mode.
+ if test $WX_SHARED = "1"; then
+ STATIC=0
+ elif test $WX_SHARED = "0"; then
+ STATIC=1
+ elif test $WX_SHARED = "auto"; then
+ STATIC="auto"
+ fi
+
+ dnl Now set the WX_UNICODE, WX_DEBUG, WX_STATIC variables
+ _WX_SELECTEDCONFIG_CHECKFOR([UNICODE], [unicode],
+ [if wxWidgets was built with UNICODE enabled])
+ _WX_SELECTEDCONFIG_CHECKFOR([DEBUG], [debug],
+ [if wxWidgets was built in DEBUG mode])
+ _WX_SELECTEDCONFIG_CHECKFOR([STATIC], [static],
+ [if wxWidgets was built in STATIC mode])
+
+ dnl init WX_SHARED from WX_STATIC
+ if test "$WX_STATIC" != "0"; then
+ WX_SHARED=0
+ else
+ WX_SHARED=1
+ fi
+
+ AC_SUBST(WX_UNICODE)
+ AC_SUBST(WX_DEBUG)
+ AC_SUBST(WX_SHARED)
+
+ dnl detect the WX_PORT to use
+ if test "$TOOLKIT" = "auto" ; then
+
+ dnl The user does not have particular preferences for this option;
+ dnl so we will detect the wxWidgets relative build setting and use it
+ AC_MSG_CHECKING([which wxWidgets toolkit was selected])
+
+ WX_GTKPORT1=$(expr "$WX_SELECTEDCONFIG" : ".*gtk1.*")
+ WX_GTKPORT2=$(expr "$WX_SELECTEDCONFIG" : ".*gtk2.*")
+ WX_MSWPORT=$(expr "$WX_SELECTEDCONFIG" : ".*msw.*")
+ WX_MOTIFPORT=$(expr "$WX_SELECTEDCONFIG" : ".*motif.*")
+ WX_OSXCOCOAPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_cocoa.*")
+ WX_OSXCARBONPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_carbon.*")
+ WX_X11PORT=$(expr "$WX_SELECTEDCONFIG" : ".*x11.*")
+ WX_MGLPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mgl.*")
+ WX_DFBPORT=$(expr "$WX_SELECTEDCONFIG" : ".*dfb.*")
+
+ WX_PORT="unknown"
+ if test "$WX_GTKPORT1" != "0"; then WX_PORT="gtk1"; fi
+ if test "$WX_GTKPORT2" != "0"; then WX_PORT="gtk2"; fi
+ if test "$WX_MSWPORT" != "0"; then WX_PORT="msw"; fi
+ if test "$WX_MOTIFPORT" != "0"; then WX_PORT="motif"; fi
+ if test "$WX_OSXCOCOAPORT" != "0"; then WX_PORT="osx_cocoa"; fi
+ if test "$WX_OSXCARBONPORT" != "0"; then WX_PORT="osx_carbon"; fi
+ if test "$WX_X11PORT" != "0"; then WX_PORT="x11"; fi
+ if test "$WX_MGLPORT" != "0"; then WX_PORT="mgl"; fi
+ if test "$WX_DFBPORT" != "0"; then WX_PORT="dfb"; fi
+
+ dnl NOTE: backward-compatible check for wx2.8; in wx2.9 the mac
+ dnl ports are called 'osx_cocoa' and 'osx_carbon' (see above)
+ WX_MACPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mac.*")
+ if test "$WX_MACPORT" != "0"; then WX_PORT="mac"; fi
+
+ dnl check at least one of the WX_*PORT has been set !
+
+ if test "$WX_PORT" = "unknown" ; then
+ AC_MSG_ERROR([
+ Cannot detect the currently installed wxWidgets port !
+ Please check your 'wx-config --cxxflags'...
+ ])
+ fi
+
+ AC_MSG_RESULT([$WX_PORT])
+ else
+
+ dnl Use the setting given by the user
+ if test -z "$TOOLKIT" ; then
+ WX_PORT=$TOOLKIT
+ else
+ dnl try with PORT
+ WX_PORT=$PORT
+ fi
+ fi
+
+ AC_SUBST(WX_PORT)
+
+ if test "$WX_DEBUG_CONFIGURE" = "1"; then
+ echo "[[dbg]] Values of all WX_* options after final detection:"
+ echo "[[dbg]] WX_DEBUG: $WX_DEBUG"
+ echo "[[dbg]] WX_UNICODE: $WX_UNICODE"
+ echo "[[dbg]] WX_SHARED: $WX_SHARED"
+ echo "[[dbg]] WX_RELEASE: $WX_RELEASE"
+ echo "[[dbg]] WX_PORT: $WX_PORT"
+ fi
+
+ dnl Avoid problem described in the WX_STANDARD_OPTIONS which happens when
+ dnl the user gives the options:
+ dnl ./configure --enable-shared --without-wxshared
+ dnl or just do
+ dnl ./configure --enable-shared
+ dnl but there is only a static build of wxWidgets available.
+ if test "$WX_SHARED" = "0" -a "$SHARED" = "1"; then
+ AC_MSG_ERROR([
+ Cannot build shared library against a static build of wxWidgets !
+ This error happens because the wxWidgets build which was selected
+ has been detected as static while you asked to build $PACKAGE_NAME
+ as shared library and this is not possible.
+ Use the '--disable-shared' option to build $PACKAGE_NAME
+ as static library or '--with-wxshared' to use wxWidgets as shared library.
+ ])
+ fi
+
+ dnl now we can finally update the DEBUG,UNICODE,SHARED options
+ dnl to their final values if they were set to 'auto'
+ if test "$DEBUG" = "auto"; then
+ DEBUG=$WX_DEBUG
+ fi
+ if test "$UNICODE" = "auto"; then
+ UNICODE=$WX_UNICODE
+ fi
+ if test "$SHARED" = "auto"; then
+ SHARED=$WX_SHARED
+ fi
+ if test "$TOOLKIT" = "auto"; then
+ TOOLKIT=$WX_PORT
+ fi
+
+ dnl in case the user needs a BUILD=debug/release var...
+ if test "$DEBUG" = "1"; then
+ BUILD="debug"
+ elif test "$DEBUG" = "0" -o "$DEBUG" = ""; then
+ BUILD="release"
+ fi
+
+ dnl respect the DEBUG variable adding the optimize/debug flags
+ dnl NOTE: the CXXFLAGS are merged together with the CPPFLAGS so we
+ dnl don't need to set them, too
+ if test "$DEBUG" = "1"; then
+ CXXFLAGS="$CXXFLAGS -g -O0"
+ CFLAGS="$CFLAGS -g -O0"
+ else
+ CXXFLAGS="$CXXFLAGS -O2"
+ CFLAGS="$CFLAGS -O2"
+ fi
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_BOOLOPT_SUMMARY([name of the boolean variable to show summary for],
+dnl [what to print when var is 1],
+dnl [what to print when var is 0])
+dnl
+dnl Prints $2 when variable $1 == 1 and prints $3 when variable $1 == 0.
+dnl This macro mainly exists just to make configure.ac scripts more readable.
+dnl
+dnl NOTE: you need to use the [" my message"] syntax for 2nd and 3rd arguments
+dnl if you want that m4 avoid to throw away the spaces prefixed to the
+dnl argument value.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_BOOLOPT_SUMMARY],
+ [
+ if test "x$$1" = "x1" ; then
+ echo $2
+ elif test "x$$1" = "x0" ; then
+ echo $3
+ else
+ echo "$1 is $$1"
+ fi
+ ])
+
+dnl ---------------------------------------------------------------------------
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
+dnl
+dnl Shows a summary message to the user about the WX_* variable contents.
+dnl This macro is used typically at the end of the configure script.
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG],
+ [
+ echo
+ echo " The wxWidgets build which will be used by $PACKAGE_NAME $PACKAGE_VERSION"
+ echo " has the following settings:"
+ WX_BOOLOPT_SUMMARY([WX_DEBUG], [" - DEBUG build"], [" - RELEASE build"])
+ WX_BOOLOPT_SUMMARY([WX_UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
+ WX_BOOLOPT_SUMMARY([WX_SHARED], [" - SHARED mode"], [" - STATIC mode"])
+ echo " - VERSION: $WX_VERSION"
+ echo " - PORT: $WX_PORT"
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN, WX_STANDARD_OPTIONS_SUMMARY_MSG_END
+dnl
+dnl Like WX_STANDARD_OPTIONS_SUMMARY_MSG macro but these two macros also gives info
+dnl about the configuration of the package which used the wxpresets.
+dnl
+dnl Typical usage:
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
+dnl echo " - Package setting 1: $SETTING1"
+dnl echo " - Package setting 2: $SETTING1"
+dnl ...
+dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_END
+dnl
+dnl ---------------------------------------------------------------------------
+AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN],
+ [
+ echo
+ echo " ----------------------------------------------------------------"
+ echo " Configuration for $PACKAGE_NAME $PACKAGE_VERSION successfully completed."
+ echo " Summary of main configuration settings for $PACKAGE_NAME:"
+ WX_BOOLOPT_SUMMARY([DEBUG], [" - DEBUG build"], [" - RELEASE build"])
+ WX_BOOLOPT_SUMMARY([UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
+ WX_BOOLOPT_SUMMARY([SHARED], [" - SHARED mode"], [" - STATIC mode"])
+ ])
+
+AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_END],
+ [
+ WX_STANDARD_OPTIONS_SUMMARY_MSG
+ echo
+ echo " Now, just run make."
+ echo " ----------------------------------------------------------------"
+ echo
+ ])
+
+
+dnl ---------------------------------------------------------------------------
+dnl Deprecated macro wrappers
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AM_OPTIONS_WXCONFIG], [WX_CONFIG_OPTIONS])
+AC_DEFUN([AM_PATH_WXCONFIG], [
+ WX_CONFIG_CHECK([$1],[$2],[$3],[$4],[$5])
])
+AC_DEFUN([AM_PATH_WXRC], [WXRC_CHECK([$1],[$2])])
projects / wxWidgets.git / blobdiff