+
+ LINE=`grep "wxUSE_DRAG_AND_DROP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dnd='wxUSE_DRAG_AND_DROP='$DEFAULT_wxUSE_DRAG_AND_DROP
+
+fi
+
+
+ eval "$ac_cv_use_dnd"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dnd >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DRAG_AND_DROP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+ echo $ac_n "checking "for --enable-wxtree"""... $ac_c" 1>&6
+echo "configure:3784: checking "for --enable-wxtree"" >&5
+ no_cache=0
+ # Check whether --enable-wxtree or --disable-wxtree was given.
+if test "${enable_wxtree+set}" = set; then
+ enableval="$enable_wxtree"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wxtree='wxUSE_WXTREE=yes'
+ else
+ ac_cv_use_wxtree='wxUSE_WXTREE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WXTREE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wxtree='wxUSE_WXTREE='$DEFAULT_wxUSE_WXTREE
+
+fi
+
+
+ eval "$ac_cv_use_wxtree"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wxtree >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WXTREE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-controls"""... $ac_c" 1>&6
+echo "configure:3825: checking "for --enable-controls"" >&5
+ no_cache=0
+ # Check whether --enable-controls or --disable-controls was given.
+if test "${enable_controls+set}" = set; then
+ enableval="$enable_controls"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_controls='wxUSE_CONTROLS=yes'
+ else
+ ac_cv_use_controls='wxUSE_CONTROLS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CONTROLS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_controls='wxUSE_CONTROLS='$DEFAULT_wxUSE_CONTROLS
+
+fi
+
+
+ eval "$ac_cv_use_controls"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_controls >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CONTROLS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+if test "$wxUSE_CONTROLS" = "yes"; then
+ DEFAULT_wxUSE_ACCEL=yes
+ DEFAULT_wxUSE_CARET=yes
+ DEFAULT_wxUSE_COMBOBOX=yes
+ DEFAULT_wxUSE_BMPBUTTON=yes
+ DEFAULT_wxUSE_CHECKBOX=yes
+ DEFAULT_wxUSE_CHECKLISTBOX=yes
+ DEFAULT_wxUSE_CHOICE=yes
+ DEFAULT_wxUSE_GAUGE=yes
+ DEFAULT_wxUSE_GRID=yes
+ DEFAULT_wxUSE_NEW_GRID=yes
+ DEFAULT_wxUSE_IMAGLIST=yes
+ DEFAULT_wxUSE_LISTBOX=yes
+ DEFAULT_wxUSE_LISTCTRL=yes
+ DEFAULT_wxUSE_NOTEBOOK=yes
+ DEFAULT_wxUSE_RADIOBOX=yes
+ DEFAULT_wxUSE_RADIOBTN=yes
+ DEFAULT_wxUSE_SASH=yes
+ DEFAULT_wxUSE_SCROLLBAR=yes
+ DEFAULT_wxUSE_SLIDER=yes
+ DEFAULT_wxUSE_SPINBTN=yes
+ DEFAULT_wxUSE_SPLITTER=yes
+ DEFAULT_wxUSE_STATBMP=yes
+ DEFAULT_wxUSE_STATBOX=yes
+ DEFAULT_wxUSE_STATLINE=yes
+ DEFAULT_wxUSE_STATUSBAR=yes
+ DEFAULT_wxUSE_TAB_DIALOG=yes
+ DEFAULT_wxUSE_TOOLBAR=yes
+ DEFAULT_wxUSE_TOOLTIPS=yes
+ DEFAULT_wxUSE_TREECTRL=yes
+elif test "$wxUSE_CONTROLS" = "no"; then
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLISTBOX=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATUSBAR=no
+ DEFAULT_wxUSE_TAB_DIALOG=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_TREECTRL=no
+fi
+
+
+ echo $ac_n "checking "for --enable-accel"""... $ac_c" 1>&6
+echo "configure:3927: checking "for --enable-accel"" >&5
+ no_cache=0
+ # Check whether --enable-accel or --disable-accel was given.
+if test "${enable_accel+set}" = set; then
+ enableval="$enable_accel"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_accel='wxUSE_ACCEL=yes'
+ else
+ ac_cv_use_accel='wxUSE_ACCEL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ACCEL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_accel='wxUSE_ACCEL='$DEFAULT_wxUSE_ACCEL
+
+fi
+
+
+ eval "$ac_cv_use_accel"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_accel >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ACCEL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-caret"""... $ac_c" 1>&6
+echo "configure:3966: checking "for --enable-caret"" >&5
+ no_cache=0
+ # Check whether --enable-caret or --disable-caret was given.
+if test "${enable_caret+set}" = set; then
+ enableval="$enable_caret"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_caret='wxUSE_CARET=yes'
+ else
+ ac_cv_use_caret='wxUSE_CARET=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CARET" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_caret='wxUSE_CARET='$DEFAULT_wxUSE_CARET
+
+fi
+
+
+ eval "$ac_cv_use_caret"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_caret >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CARET" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-bmpbutton"""... $ac_c" 1>&6
+echo "configure:4005: checking "for --enable-bmpbutton"" >&5
+ no_cache=0
+ # Check whether --enable-bmpbutton or --disable-bmpbutton was given.
+if test "${enable_bmpbutton+set}" = set; then
+ enableval="$enable_bmpbutton"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=yes'
+ else
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BMPBUTTON" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_bmpbutton='wxUSE_BMPBUTTON='$DEFAULT_wxUSE_BMPBUTTON
+
+fi
+
+
+ eval "$ac_cv_use_bmpbutton"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_bmpbutton >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BMPBUTTON" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-checkbox"""... $ac_c" 1>&6
+echo "configure:4044: checking "for --enable-checkbox"" >&5
+ no_cache=0
+ # Check whether --enable-checkbox or --disable-checkbox was given.
+if test "${enable_checkbox+set}" = set; then
+ enableval="$enable_checkbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_checkbox='wxUSE_CHECKBOX=yes'
+ else
+ ac_cv_use_checkbox='wxUSE_CHECKBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHECKBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_checkbox='wxUSE_CHECKBOX='$DEFAULT_wxUSE_CHECKBOX
+
+fi
+
+
+ eval "$ac_cv_use_checkbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_checkbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHECKBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-checklst"""... $ac_c" 1>&6
+echo "configure:4083: checking "for --enable-checklst"" >&5
+ no_cache=0
+ # Check whether --enable-checklst or --disable-checklst was given.
+if test "${enable_checklst+set}" = set; then
+ enableval="$enable_checklst"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_checklst='wxUSE_CHECKLST=yes'
+ else
+ ac_cv_use_checklst='wxUSE_CHECKLST=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHECKLST" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_checklst='wxUSE_CHECKLST='$DEFAULT_wxUSE_CHECKLST
+
+fi
+
+
+ eval "$ac_cv_use_checklst"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_checklst >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHECKLST" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-choice"""... $ac_c" 1>&6
+echo "configure:4122: checking "for --enable-choice"" >&5
+ no_cache=0
+ # Check whether --enable-choice or --disable-choice was given.
+if test "${enable_choice+set}" = set; then
+ enableval="$enable_choice"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_choice='wxUSE_CHOICE=yes'
+ else
+ ac_cv_use_choice='wxUSE_CHOICE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CHOICE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_choice='wxUSE_CHOICE='$DEFAULT_wxUSE_CHOICE
+
+fi
+
+
+ eval "$ac_cv_use_choice"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_choice >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CHOICE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-combobox"""... $ac_c" 1>&6
+echo "configure:4161: checking "for --enable-combobox"" >&5
+ no_cache=0
+ # Check whether --enable-combobox or --disable-combobox was given.
+if test "${enable_combobox+set}" = set; then
+ enableval="$enable_combobox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_combobox='wxUSE_COMBOBOX=yes'
+ else
+ ac_cv_use_combobox='wxUSE_COMBOBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COMBOBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_combobox='wxUSE_COMBOBOX='$DEFAULT_wxUSE_COMBOBOX
+
+fi
+
+
+ eval "$ac_cv_use_combobox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_combobox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COMBOBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-gauge"""... $ac_c" 1>&6
+echo "configure:4200: checking "for --enable-gauge"" >&5
+ no_cache=0
+ # Check whether --enable-gauge or --disable-gauge was given.
+if test "${enable_gauge+set}" = set; then
+ enableval="$enable_gauge"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gauge='wxUSE_GAUGE=yes'
+ else
+ ac_cv_use_gauge='wxUSE_GAUGE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GAUGE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gauge='wxUSE_GAUGE='$DEFAULT_wxUSE_GAUGE
+
+fi
+
+
+ eval "$ac_cv_use_gauge"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gauge >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GAUGE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-grid"""... $ac_c" 1>&6
+echo "configure:4239: checking "for --enable-grid"" >&5
+ no_cache=0
+ # Check whether --enable-grid or --disable-grid was given.
+if test "${enable_grid+set}" = set; then
+ enableval="$enable_grid"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_grid='wxUSE_GRID=yes'
+ else
+ ac_cv_use_grid='wxUSE_GRID=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GRID" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_grid='wxUSE_GRID='$DEFAULT_wxUSE_GRID
+
+fi
+
+
+ eval "$ac_cv_use_grid"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_grid >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GRID" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-newgrid"""... $ac_c" 1>&6
+echo "configure:4278: checking "for --enable-newgrid"" >&5
+ no_cache=0
+ # Check whether --enable-newgrid or --disable-newgrid was given.
+if test "${enable_newgrid+set}" = set; then
+ enableval="$enable_newgrid"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_newgrid='wxUSE_NEW_GRID=yes'
+ else
+ ac_cv_use_newgrid='wxUSE_NEW_GRID=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NEW_GRID" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_newgrid='wxUSE_NEW_GRID='$DEFAULT_wxUSE_NEW_GRID
+
+fi
+
+
+ eval "$ac_cv_use_newgrid"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_newgrid >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NEW_GRID" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-imaglist"""... $ac_c" 1>&6
+echo "configure:4317: checking "for --enable-imaglist"" >&5
+ no_cache=0
+ # Check whether --enable-imaglist or --disable-imaglist was given.
+if test "${enable_imaglist+set}" = set; then
+ enableval="$enable_imaglist"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_imaglist='wxUSE_IMAGLIST=yes'
+ else
+ ac_cv_use_imaglist='wxUSE_IMAGLIST=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IMAGLIST" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_imaglist='wxUSE_IMAGLIST='$DEFAULT_wxUSE_IMAGLIST
+
+fi
+
+
+ eval "$ac_cv_use_imaglist"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_imaglist >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IMAGLIST" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-listbox"""... $ac_c" 1>&6
+echo "configure:4356: checking "for --enable-listbox"" >&5
+ no_cache=0
+ # Check whether --enable-listbox or --disable-listbox was given.
+if test "${enable_listbox+set}" = set; then
+ enableval="$enable_listbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_listbox='wxUSE_LISTBOX=yes'
+ else
+ ac_cv_use_listbox='wxUSE_LISTBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LISTBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_listbox='wxUSE_LISTBOX='$DEFAULT_wxUSE_LISTBOX
+
+fi
+
+
+ eval "$ac_cv_use_listbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_listbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LISTBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-listctrl"""... $ac_c" 1>&6
+echo "configure:4395: checking "for --enable-listctrl"" >&5
+ no_cache=0
+ # Check whether --enable-listctrl or --disable-listctrl was given.
+if test "${enable_listctrl+set}" = set; then
+ enableval="$enable_listctrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_listctrl='wxUSE_LISTCTRL=yes'
+ else
+ ac_cv_use_listctrl='wxUSE_LISTCTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LISTCTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_listctrl='wxUSE_LISTCTRL='$DEFAULT_wxUSE_LISTCTRL
+
+fi
+
+
+ eval "$ac_cv_use_listctrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_listctrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LISTCTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-notebook"""... $ac_c" 1>&6
+echo "configure:4434: checking "for --enable-notebook"" >&5
+ no_cache=0
+ # Check whether --enable-notebook or --disable-notebook was given.
+if test "${enable_notebook+set}" = set; then
+ enableval="$enable_notebook"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_notebook='wxUSE_NOTEBOOK=yes'
+ else
+ ac_cv_use_notebook='wxUSE_NOTEBOOK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NOTEBOOK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_notebook='wxUSE_NOTEBOOK='$DEFAULT_wxUSE_NOTEBOOK
+
+fi
+
+
+ eval "$ac_cv_use_notebook"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_notebook >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NOTEBOOK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-radiobox"""... $ac_c" 1>&6
+echo "configure:4473: checking "for --enable-radiobox"" >&5
+ no_cache=0
+ # Check whether --enable-radiobox or --disable-radiobox was given.
+if test "${enable_radiobox+set}" = set; then
+ enableval="$enable_radiobox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_radiobox='wxUSE_RADIOBOX=yes'
+ else
+ ac_cv_use_radiobox='wxUSE_RADIOBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_RADIOBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_radiobox='wxUSE_RADIOBOX='$DEFAULT_wxUSE_RADIOBOX
+
+fi
+
+
+ eval "$ac_cv_use_radiobox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_radiobox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_RADIOBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-radiobtn"""... $ac_c" 1>&6
+echo "configure:4512: checking "for --enable-radiobtn"" >&5
+ no_cache=0
+ # Check whether --enable-radiobtn or --disable-radiobtn was given.
+if test "${enable_radiobtn+set}" = set; then
+ enableval="$enable_radiobtn"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN=yes'
+ else
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_RADIOBTN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_radiobtn='wxUSE_RADIOBTN='$DEFAULT_wxUSE_RADIOBTN
+
+fi
+
+
+ eval "$ac_cv_use_radiobtn"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_radiobtn >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_RADIOBTN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-sash"""... $ac_c" 1>&6
+echo "configure:4551: checking "for --enable-sash"" >&5
+ no_cache=0
+ # Check whether --enable-sash or --disable-sash was given.
+if test "${enable_sash+set}" = set; then
+ enableval="$enable_sash"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_sash='wxUSE_SASH=yes'
+ else
+ ac_cv_use_sash='wxUSE_SASH=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SASH" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_sash='wxUSE_SASH='$DEFAULT_wxUSE_SASH
+
+fi
+
+
+ eval "$ac_cv_use_sash"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_sash >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SASH" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-scrollbar"""... $ac_c" 1>&6
+echo "configure:4590: checking "for --enable-scrollbar"" >&5
+ no_cache=0
+ # Check whether --enable-scrollbar or --disable-scrollbar was given.
+if test "${enable_scrollbar+set}" = set; then
+ enableval="$enable_scrollbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR=yes'
+ else
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SCROLLBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_scrollbar='wxUSE_SCROLLBAR='$DEFAULT_wxUSE_SCROLLBAR
+
+fi
+
+
+ eval "$ac_cv_use_scrollbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_scrollbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SCROLLBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-slider"""... $ac_c" 1>&6
+echo "configure:4629: checking "for --enable-slider"" >&5
+ no_cache=0
+ # Check whether --enable-slider or --disable-slider was given.
+if test "${enable_slider+set}" = set; then
+ enableval="$enable_slider"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_slider='wxUSE_SLIDER=yes'
+ else
+ ac_cv_use_slider='wxUSE_SLIDER=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SLIDER" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_slider='wxUSE_SLIDER='$DEFAULT_wxUSE_SLIDER
+
+fi
+
+
+ eval "$ac_cv_use_slider"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_slider >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SLIDER" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-spinbtn"""... $ac_c" 1>&6
+echo "configure:4668: checking "for --enable-spinbtn"" >&5
+ no_cache=0
+ # Check whether --enable-spinbtn or --disable-spinbtn was given.
+if test "${enable_spinbtn+set}" = set; then
+ enableval="$enable_spinbtn"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_spinbtn='wxUSE_SPINBTN=yes'
+ else
+ ac_cv_use_spinbtn='wxUSE_SPINBTN=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPINBTN" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_spinbtn='wxUSE_SPINBTN='$DEFAULT_wxUSE_SPINBTN
+
+fi
+
+
+ eval "$ac_cv_use_spinbtn"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_spinbtn >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPINBTN" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-splitter"""... $ac_c" 1>&6
+echo "configure:4707: checking "for --enable-splitter"" >&5
+ no_cache=0
+ # Check whether --enable-splitter or --disable-splitter was given.
+if test "${enable_splitter+set}" = set; then
+ enableval="$enable_splitter"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splitter='wxUSE_SPLITTER=yes'
+ else
+ ac_cv_use_splitter='wxUSE_SPLITTER=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLITTER" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splitter='wxUSE_SPLITTER='$DEFAULT_wxUSE_SPLITTER
+
+fi
+
+
+ eval "$ac_cv_use_splitter"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splitter >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLITTER" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statbmp"""... $ac_c" 1>&6
+echo "configure:4746: checking "for --enable-statbmp"" >&5
+ no_cache=0
+ # Check whether --enable-statbmp or --disable-statbmp was given.
+if test "${enable_statbmp+set}" = set; then
+ enableval="$enable_statbmp"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbmp='wxUSE_STATBMP=yes'
+ else
+ ac_cv_use_statbmp='wxUSE_STATBMP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBMP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbmp='wxUSE_STATBMP='$DEFAULT_wxUSE_STATBMP
+
+fi
+
+
+ eval "$ac_cv_use_statbmp"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbmp >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBMP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statbox"""... $ac_c" 1>&6
+echo "configure:4785: checking "for --enable-statbox"" >&5
+ no_cache=0
+ # Check whether --enable-statbox or --disable-statbox was given.
+if test "${enable_statbox+set}" = set; then
+ enableval="$enable_statbox"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statbox='wxUSE_STATBOX=yes'
+ else
+ ac_cv_use_statbox='wxUSE_STATBOX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATBOX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statbox='wxUSE_STATBOX='$DEFAULT_wxUSE_STATBOX
+
+fi
+
+
+ eval "$ac_cv_use_statbox"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statbox >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATBOX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statline"""... $ac_c" 1>&6
+echo "configure:4824: checking "for --enable-statline"" >&5
+ no_cache=0
+ # Check whether --enable-statline or --disable-statline was given.
+if test "${enable_statline+set}" = set; then
+ enableval="$enable_statline"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statline='wxUSE_STATLINE=yes'
+ else
+ ac_cv_use_statline='wxUSE_STATLINE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATLINE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statline='wxUSE_STATLINE='$DEFAULT_wxUSE_STATLINE
+
+fi
+
+
+ eval "$ac_cv_use_statline"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statline >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATLINE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-statusbar"""... $ac_c" 1>&6
+echo "configure:4863: checking "for --enable-statusbar"" >&5
+ no_cache=0
+ # Check whether --enable-statusbar or --disable-statusbar was given.
+if test "${enable_statusbar+set}" = set; then
+ enableval="$enable_statusbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=yes'
+ else
+ ac_cv_use_statusbar='wxUSE_STATUSBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STATUSBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_statusbar='wxUSE_STATUSBAR='$DEFAULT_wxUSE_STATUSBAR
+
+fi
+
+
+ eval "$ac_cv_use_statusbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_statusbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STATUSBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-tabdialog"""... $ac_c" 1>&6
+echo "configure:4902: checking "for --enable-tabdialog"" >&5
+ no_cache=0
+ # Check whether --enable-tabdialog or --disable-tabdialog was given.
+if test "${enable_tabdialog+set}" = set; then
+ enableval="$enable_tabdialog"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=yes'
+ else
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TABDIALOG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tabdialog='wxUSE_TABDIALOG='$DEFAULT_wxUSE_TABDIALOG
+
+fi
+
+
+ eval "$ac_cv_use_tabdialog"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tabdialog >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TABDIALOG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-toolbar"""... $ac_c" 1>&6
+echo "configure:4941: checking "for --enable-toolbar"" >&5
+ no_cache=0
+ # Check whether --enable-toolbar or --disable-toolbar was given.
+if test "${enable_toolbar+set}" = set; then
+ enableval="$enable_toolbar"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=yes'
+ else
+ ac_cv_use_toolbar='wxUSE_TOOLBAR=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLBAR" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_toolbar='wxUSE_TOOLBAR='$DEFAULT_wxUSE_TOOLBAR
+
+fi
+
+
+ eval "$ac_cv_use_toolbar"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_toolbar >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLBAR" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-treectrl"""... $ac_c" 1>&6
+echo "configure:4980: checking "for --enable-treectrl"" >&5
+ no_cache=0
+ # Check whether --enable-treectrl or --disable-treectrl was given.
+if test "${enable_treectrl+set}" = set; then
+ enableval="$enable_treectrl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_treectrl='wxUSE_TREECTRL=yes'
+ else
+ ac_cv_use_treectrl='wxUSE_TREECTRL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TREECTRL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_treectrl='wxUSE_TREECTRL='$DEFAULT_wxUSE_TREECTRL
+
+fi
+
+
+ eval "$ac_cv_use_treectrl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_treectrl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TREECTRL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-commondlg"""... $ac_c" 1>&6
+echo "configure:5021: checking "for --enable-commondlg"" >&5
+ no_cache=0
+ # Check whether --enable-commondlg or --disable-commondlg was given.
+if test "${enable_commondlg+set}" = set; then
+ enableval="$enable_commondlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=yes'
+ else
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_COMMONDLGS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_commondlg='wxUSE_COMMONDLGS='$DEFAULT_wxUSE_COMMONDLGS
+
+fi
+
+
+ eval "$ac_cv_use_commondlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_commondlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_COMMONDLGS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-dirdlg"""... $ac_c" 1>&6
+echo "configure:5060: checking "for --enable-dirdlg"" >&5
+ no_cache=0
+ # Check whether --enable-dirdlg or --disable-dirdlg was given.
+if test "${enable_dirdlg+set}" = set; then
+ enableval="$enable_dirdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=yes'
+ else
+ ac_cv_use_dirdlg='wxUSE_DIRDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DIRDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dirdlg='wxUSE_DIRDLG='$DEFAULT_wxUSE_DIRDLG
+
+fi
+
+
+ eval "$ac_cv_use_dirdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dirdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DIRDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-textdlg"""... $ac_c" 1>&6
+echo "configure:5099: checking "for --enable-textdlg"" >&5
+ no_cache=0
+ # Check whether --enable-textdlg or --disable-textdlg was given.
+if test "${enable_textdlg+set}" = set; then
+ enableval="$enable_textdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_textdlg='wxUSE_TEXTDLG=yes'
+ else
+ ac_cv_use_textdlg='wxUSE_TEXTDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TEXTDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_textdlg='wxUSE_TEXTDLG='$DEFAULT_wxUSE_TEXTDLG
+
+fi
+
+
+ eval "$ac_cv_use_textdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_textdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TEXTDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-tipdlg"""... $ac_c" 1>&6
+echo "configure:5138: checking "for --enable-tipdlg"" >&5
+ no_cache=0
+ # Check whether --enable-tipdlg or --disable-tipdlg was given.
+if test "${enable_tipdlg+set}" = set; then
+ enableval="$enable_tipdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=yes'
+ else
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STARTUP_TIPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS='$DEFAULT_wxUSE_STARTUP_TIPS
+
+fi
+
+
+ eval "$ac_cv_use_tipdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tipdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STARTUP_TIPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-progressdlg"""... $ac_c" 1>&6
+echo "configure:5177: checking "for --enable-progressdlg"" >&5
+ no_cache=0
+ # Check whether --enable-progressdlg or --disable-progressdlg was given.
+if test "${enable_progressdlg+set}" = set; then
+ enableval="$enable_progressdlg"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=yes'
+ else
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PROGRESSDLG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_progressdlg='wxUSE_PROGRESSDLG='$DEFAULT_wxUSE_PROGRESSDLG
+
+fi
+
+
+ eval "$ac_cv_use_progressdlg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_progressdlg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PROGRESSDLG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-miniframe"""... $ac_c" 1>&6
+echo "configure:5216: checking "for --enable-miniframe"" >&5
+ no_cache=0
+ # Check whether --enable-miniframe or --disable-miniframe was given.
+if test "${enable_miniframe+set}" = set; then
+ enableval="$enable_miniframe"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_miniframe='wxUSE_MINIFRAME=yes'
+ else
+ ac_cv_use_miniframe='wxUSE_MINIFRAME=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MINIFRAME" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_miniframe='wxUSE_MINIFRAME='$DEFAULT_wxUSE_MINIFRAME
+
+fi
+
+
+ eval "$ac_cv_use_miniframe"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_miniframe >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MINIFRAME" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-html"""... $ac_c" 1>&6
+echo "configure:5255: checking "for --enable-html"" >&5
+ no_cache=0
+ # Check whether --enable-html or --disable-html was given.
+if test "${enable_html+set}" = set; then
+ enableval="$enable_html"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_html='wxUSE_HTML=yes'
+ else
+ ac_cv_use_html='wxUSE_HTML=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_HTML" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_html='wxUSE_HTML='$DEFAULT_wxUSE_HTML
+
+fi
+
+
+ eval "$ac_cv_use_html"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_html >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_HTML" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-tooltips"""... $ac_c" 1>&6
+echo "configure:5294: checking "for --enable-tooltips"" >&5
+ no_cache=0
+ # Check whether --enable-tooltips or --disable-tooltips was given.
+if test "${enable_tooltips+set}" = set; then
+ enableval="$enable_tooltips"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS=yes'
+ else
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TOOLTIPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_tooltips='wxUSE_TOOLTIPS='$DEFAULT_wxUSE_TOOLTIPS
+
+fi
+
+
+ eval "$ac_cv_use_tooltips"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_tooltips >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TOOLTIPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-splines"""... $ac_c" 1>&6
+echo "configure:5333: checking "for --enable-splines"" >&5
+ no_cache=0
+ # Check whether --enable-splines or --disable-splines was given.
+if test "${enable_splines+set}" = set; then
+ enableval="$enable_splines"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_splines='wxUSE_SPLINES=yes'
+ else
+ ac_cv_use_splines='wxUSE_SPLINES=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SPLINES" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_splines='wxUSE_SPLINES='$DEFAULT_wxUSE_SPLINES
+
+fi
+
+
+ eval "$ac_cv_use_splines"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_splines >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SPLINES" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-validators"""... $ac_c" 1>&6
+echo "configure:5372: checking "for --enable-validators"" >&5
+ no_cache=0
+ # Check whether --enable-validators or --disable-validators was given.
+if test "${enable_validators+set}" = set; then
+ enableval="$enable_validators"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_validators='wxUSE_VALIDATORS=yes'
+ else
+ ac_cv_use_validators='wxUSE_VALIDATORS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_VALIDATORS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_validators='wxUSE_VALIDATORS='$DEFAULT_wxUSE_VALIDATORS
+
+fi
+
+
+ eval "$ac_cv_use_validators"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_validators >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_VALIDATORS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-busyinfo"""... $ac_c" 1>&6
+echo "configure:5411: checking "for --enable-busyinfo"" >&5
+ no_cache=0
+ # Check whether --enable-busyinfo or --disable-busyinfo was given.
+if test "${enable_busyinfo+set}" = set; then
+ enableval="$enable_busyinfo"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=yes'
+ else
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_BUSYINFO" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_busyinfo='wxUSE_BUSYINFO='$DEFAULT_wxUSE_BUSYINFO
+
+fi
+
+
+ eval "$ac_cv_use_busyinfo"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_busyinfo >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_BUSYINFO" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-gif"""... $ac_c" 1>&6
+echo "configure:5452: checking "for --enable-gif"" >&5
+ no_cache=0
+ # Check whether --enable-gif or --disable-gif was given.
+if test "${enable_gif+set}" = set; then
+ enableval="$enable_gif"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gif='wxUSE_GIF=yes'
+ else
+ ac_cv_use_gif='wxUSE_GIF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GIF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gif='wxUSE_GIF='$DEFAULT_wxUSE_GIF
+
+fi
+
+
+ eval "$ac_cv_use_gif"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gif >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GIF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-pcx"""... $ac_c" 1>&6
+echo "configure:5491: checking "for --enable-pcx"" >&5
+ no_cache=0
+ # Check whether --enable-pcx or --disable-pcx was given.
+if test "${enable_pcx+set}" = set; then
+ enableval="$enable_pcx"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pcx='wxUSE_PCX=yes'
+ else
+ ac_cv_use_pcx='wxUSE_PCX=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PCX" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pcx='wxUSE_PCX='$DEFAULT_wxUSE_PCX
+
+fi
+
+
+ eval "$ac_cv_use_pcx"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pcx >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PCX" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-pnm"""... $ac_c" 1>&6
+echo "configure:5530: checking "for --enable-pnm"" >&5
+ no_cache=0
+ # Check whether --enable-pnm or --disable-pnm was given.
+if test "${enable_pnm+set}" = set; then
+ enableval="$enable_pnm"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_pnm='wxUSE_PNM=yes'
+ else
+ ac_cv_use_pnm='wxUSE_PNM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PNM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_pnm='wxUSE_PNM='$DEFAULT_wxUSE_PNM
+
+fi
+
+
+ eval "$ac_cv_use_pnm"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PNM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+ echo "saving argument cache $wx_arg_cache_file"
+ mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file}
+
+
+
+echo $ac_n "checking for toolkit""... $ac_c" 1>&6
+echo "configure:5575: checking for toolkit" >&5
+
+if test "$wxUSE_GUI" = "yes"; then
+
+if test "$TOOLKIT_GIVEN" = 1; then
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ eval "$var=`echo \$value | sed -e "s/yes/1/" -e "s/no/0/"`"
+ done
+else
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ if test "$has_toolkit_in_cache" != 1; then
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ else
+ var=DEFAULT_wxUSE_$toolkit
+ fi
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+fi
+
+NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_WINE:-0} + ${wxUSE_MINGW:-0} + ${wxUSE_CYGWIN:-0}`
+
+case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ { echo "configure: error: Please specify a toolkit - cannot determine the default for ${host}" 1>&2; exit 1; }
+ ;;
+ *)
+ { echo "configure: error: Please specify at most one toolkit (may be some are cached?)" 1>&2; exit 1; }
+esac
+
+for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" != x; then
+ cache_var=CACHE_$toolkit
+ eval "cache=\$${cache_var}"
+ if test "$cache" = 1; then
+ echo "$var=$value" >> ${wx_arg_cache_file}
+ fi
+ if test "$value" = 1; then
+ echo "$ac_t""`echo $toolkit | tr A-Z a-z`" 1>&6
+ fi
+ fi
+done
+
+else
+ echo "$ac_t""base only" 1>&6
+fi
+
+
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+if eval "test $host != $build"; then
+ if eval "test $host_alias != NONE"; then
+ CC=$host_alias-gcc
+ CXX=$host_alias-c++
+ AR=$host_alias-ar
+ RANLIB=$host_alias-ranlib
+ DLLTOOL=$host_alias-dlltool
+ LD=$host_alias-ld
+ NM=$host_alias-nm
+ STRIP=$host_alias-strip
+ fi
+fi
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5692: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5722: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5773: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:5805: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 5816 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:5821: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:5847: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:5852: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:5861: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:5880: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+
+CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:5915: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 5930 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:5936: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 5947 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:5953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 5964 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:5970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+
+if test $ac_cv_prog_gcc = yes; then
+ echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
+echo "configure:5997: checking whether ${CC-cc} needs -traditional" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_pattern="Autoconf.*'x'"
+ cat > conftest.$ac_ext <<EOF
+#line 6003 "configure"
+#include "confdefs.h"
+#include <sgtty.h>
+Autoconf TIOCGETP
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=yes
+else
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+ if test $ac_cv_prog_gcc_traditional = no; then
+ cat > conftest.$ac_ext <<EOF
+#line 6021 "configure"
+#include "confdefs.h"
+#include <termio.h>
+Autoconf TCGETA
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "$ac_pattern" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+ fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
+ if test $ac_cv_prog_gcc_traditional = yes; then
+ CC="$CC -traditional"
+ fi
+fi
+
+
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+
+for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6057: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX="$ac_cv_prog_CXX"
+if test -n "$CXX"; then
+ echo "$ac_t""$CXX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CXX" && break
+done
+test -n "$CXX" || CXX="gcc"
+
+
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:6089: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 6100 "configure"
+#include "confdefs.h"
+
+int main(){return(0);}
+EOF
+if { (eval echo configure:6105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cxx_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cxx_cross=no
+ else
+ ac_cv_prog_cxx_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cxx_works=no
+fi
+rm -fr conftest*
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
+if test $ac_cv_prog_cxx_works = no; then
+ { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:6131: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
+cross_compiling=$ac_cv_prog_cxx_cross
+
+echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
+echo "configure:6136: checking whether we are using GNU C++" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.C <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:6145: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gxx=yes
+else
+ ac_cv_prog_gxx=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gxx" 1>&6
+
+if test $ac_cv_prog_gxx = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+
+ac_test_CXXFLAGS="${CXXFLAGS+set}"
+ac_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS=
+echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
+echo "configure:6164: checking whether ${CXX-g++} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.cc
+if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
+ ac_cv_prog_cxx_g=yes
+else
+ ac_cv_prog_cxx_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS="$ac_save_CXXFLAGS"
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+
+
+echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
+echo "configure:6197: checking how to run the C++ preprocessor" >&5
+if test -z "$CXXCPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+ CXXCPP="${CXX-g++} -E"
+ cat > conftest.$ac_ext <<EOF
+#line 6210 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6215: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CXXCPP=/lib/cpp
+fi
+rm -f conftest*
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+fi
+fi
+CXXCPP="$ac_cv_prog_CXXCPP"
+echo "$ac_t""$CXXCPP" 1>&6
+
+
+CXXFLAGS=`echo "$CXXFLAGS" | sed 's/-g//g'`
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6253: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6284: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:6324: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6380: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP="true"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+echo $ac_n "checking "make for VPATH support"""... $ac_c" 1>&6
+echo "configure:6409: checking "make for VPATH support"" >&5
+cat - << EOF > confMake
+check : file
+ cp \$? \$@
+ cp \$? final_file
+EOF
+
+if test ! -d sub ; then
+ mkdir sub
+fi
+echo dummy > sub/file
+${MAKE-make} -f confMake VPATH=sub 2> config.log > /dev/null
+RESULT=$?
+rm -f sub/file check final_file confMake
+rmdir sub
+if test "$RESULT" = 0; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: You need a make-utility that is able to use the variable
+VPATH correctly.
+If your version of make does not support VPATH correctly" 1>&2; exit 1; }
+fi
+
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6438: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_YACC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6472: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$LEXLIB"
+then
+ case "$LEX" in
+ flex*) ac_lib=fl ;;
+ *) ac_lib=l ;;
+ esac
+ echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:6506: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6514 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap();
+
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:6525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LEXLIB="-l$ac_lib"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:6549: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+SEARCH_INCLUDE="\
+ /usr/local/include \
+ \
+ /usr/Motif-1.2/include \
+ /usr/Motif-2.1/include \
+ \
+ /usr/include/Motif1.2 \
+ /opt/xpm/include/X11 \
+ /opt/GBxpm/include/ \
+ /opt/GBxpm/X11/include/ \
+ \
+ /usr/Motif1.2/include \
+ /usr/dt/include \
+ /usr/openwin/include \
+ \
+ /usr/include/Xm \
+ \
+ /usr/X11R6/include \
+ /usr/X11R6.4/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X11/include \
+ /usr/include/X11 \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include/gtk \
+ /usr/local/include/gtk \
+ /usr/include/glib \
+ /usr/local/include/glib \
+ \
+ /usr/include/qt \
+ /usr/local/include/qt \
+ \
+ /usr/include/windows \
+ /usr/include/wine \
+ /usr/local/include/wine \
+ \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/share/include \
+ \
+ /usr/include"
+
+SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` "
+
+
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+
+if test "$wxUSE_GUI" = "yes"; then
+
+TOOLKIT=
+TOOLKIT_INCLUDE=
+
+GUIOBJS=
+COMMONOBJS=
+GENERICOBJS=
+
+GUI_TK_LIBRARY=
+GUI_TK_LINK=
+
+WXGTK12=
+
+WXWINE=
+
+PROGRAM_EXT=
+
+if test "$wxUSE_CYGWIN" = 1 || test "$wxUSE_MINGW" = 1 ; then
+ if test "$cross_compiling" = "yes" ; then
+ echo "configure: warning: Cross compiling --- skipping windows.h check" 1>&2
+ else
+ echo $ac_n "checking for Windows headers""... $ac_c" 1>&6
+echo "configure:6710: checking for Windows headers" >&5
+
+ac_find_includes=
+for ac_dir in $SEARCH_INCLUDE;
+ do
+ if test -f "$ac_dir/windows.h"; then
+ ac_find_includes=$ac_dir
+ break
+ fi
+ done
+
+ if test "$ac_find_includes" != "" ; then
+ echo "$ac_t""found $ac_find_includes" 1>&6
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
+ else
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
+ fi
+ fi
+
+ INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS msw"
+ LIBS="$LIBS -lkernel32 -luser32 -lgdi32 -lcomdlg32 -lwinspool -lwinmm -lshell32 -lcomctl32 -lctl3d32 -lcrtdll -ladvapi32 -lwsock32"
+
+ if test "$wxUSE_MINGW" = 1; then
+ LDFLAGS="$LDFLAGS -mwindows"
+ fi
+
+ TOOLKIT=MSW
+
+ GUIOBJS="\$(MSW_GUIOBJS)"
+ GUIHEADERS="\$(MSW_HEADERS)"
+ COMMONOBJS="\$(MSW_COMMONOBJS)"
+ GENERICOBJS="\$(MSW_GENERICOBJS)"
+ UNIXOBJS=
+ GUIDIST=MSW_DIST
+ PROGRAM_EXT=.exe
+fi
+
+if test "$wxUSE_GTK" = 1; then
+
+ if test x$gtk_config_exec_prefix != x ; then
+ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+ fi
+ fi
+ if test x$gtk_config_prefix != x ; then
+ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+ fi
+ fi
+
+ # Extract the first word of "gtk-config", so it can be a program name with args.
+set dummy gtk-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6766: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GTK_CONFIG" in
+ /*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
+ ;;
+esac
+fi
+GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
+if test -n "$GTK_CONFIG"; then
+ echo "$ac_t""$GTK_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ min_gtk_version=1.2.1
+ echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
+echo "configure:6801: checking for GTK - version >= $min_gtk_version" >&5
+ no_gtk=""
+ if test "$GTK_CONFIG" != "no" ; then
+ GTK_CFLAGS=`$GTK_CONFIG --cflags`
+ GTK_LIBS=`$GTK_CONFIG --libs`
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6814 "configure"
+#include "confdefs.h"
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+
+ if (sscanf("$min_gtk_version", "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ if (gtk_minor_version == 1) return FALSE;
+
+ return !((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)));
+}
+
projects / wxWidgets.git / blobdiff