-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-ac_env_CXX_set=${CXX+set}
-ac_env_CXX_value=$CXX
-ac_cv_env_CXX_set=${CXX+set}
-ac_cv_env_CXX_value=$CXX
-ac_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_env_CXXFLAGS_value=$CXXFLAGS
-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_cv_env_CXXFLAGS_value=$CXXFLAGS
-ac_env_CXXCPP_set=${CXXCPP+set}
-ac_env_CXXCPP_value=$CXXCPP
-ac_cv_env_CXXCPP_set=${CXXCPP+set}
-ac_cv_env_CXXCPP_value=$CXXCPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<EOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-EOF
-
- cat <<EOF
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
-EOF
-
- cat <<\EOF
-
-X features:
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST build programs to run on HOST [BUILD]
- --target=TARGET configure for building compilers for TARGET [HOST]
-EOF
-fi
-
-if test -n "$ac_init_help"; then
-
- cat <<\EOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-gui use GUI classes
- --enable-universal use wxWindows GUI controls instead of native ones
- --enable-nanox use NanoX
- --enable-gtk2 use GTK+ 2.0 if available (EXPERIMENTAL)
- --enable-shared create shared library code
- --enable-soname set the DT_SONAME field in ELF shared libraries
- --enable-optimise create optimised code
- --enable-debug same as debug_flag and debug_info
- --enable-precomp enable use of precompiled headers (Mac OS X)
- --enable-debug_flag set __WXDEBUG__ flag (recommended for developers!)
- --enable-debug_info create code with debugging information
- --enable-debug_gdb create code with extra GDB debugging information
- --enable-debug_cntxt use wxDebugContext
- --enable-mem_tracing create code with memory tracing
- --enable-profile create code with profiling information
- --enable-no_rtti create code without RTTI information
- --enable-no_exceptions create code without C++ exceptions handling
- --enable-permissive compile code disregarding strict ANSI
- --enable-no_deps create code without dependency information
- --enable-compat20 enable wxWindows 2.0 compatibility
- --disable-compat22 disable wxWindows 2.2 compatibility
- --enable-rpath=DIR output the rpath flag from wx-config
- --enable-intl use internationalization system
- --enable-config use wxConfig (and derived) classes
- --enable-protocols use wxProtocol and derived classes
- --enable-ftp use wxFTP (requires wxProtocol
- --enable-http use wxHTTP (requires wxProtocol
- --enable-fileproto use wxFileProto class (requires wxProtocol
- --enable-sockets use socket/network classes
- --enable-ipc use interprocess communication (wxSocket etc.)
- --enable-cmdline use wxCmdLineParser class
- --enable-datetime use wxDateTime class
- --enable-timedate use obsolete wxDate/wxTime classes
- --enable-stopwatch use wxStopWatch class
- --enable-dialupman use dialup network classes
- --enable-apple_ieee use the Apple IEEE codec
- --enable-timer use wxTimer class
- --enable-wave use wxWave class
- --enable-fraction use wxFraction class
- --enable-dynlib use wxLibrary class for DLL loading
- --enable-dynamicloader use (new) wxDynamicLibrary class
- --enable-longlong use wxLongLong class
- --enable-geometry use geometry class
- --enable-log use logging system
- --enable-streams use wxStream etc classes
- --enable-file use wxFile classes
- --enable-ffile use wxFFile classes
- --enable-textbuf use wxTextBuffer class
- --enable-textfile use wxTextFile class
- --enable-fontmap use font encodings conversion classes
- --enable-unicode compile wxString with Unicode support
- --enable-mslu use MS Layer for Unicode on Windows 9x (win32 only)
- --enable-wxprintfv use wxWindows implementation of vprintf()
- --enable-std_iostreams use standard C++ stream classes
- --enable-filesystem use virtual file systems classes
- --enable-fs_inet use virtual HTTP/FTP filesystems
- --enable-fs_zip use virtual ZIP filesystems
- --enable-zipstream use wxZipInputStream
- --enable-catch_segvs catch signals and pass them to wxApp::OnFatalException
- --enable-snglinst use wxSingleInstanceChecker class
- --enable-mimetype use wxMimeTypesManager
- --enable-sysoptions use wxSystemOptions
- --enable-url use wxURL class
- --enable-protocol use wxProtocol class
- --enable-protocol-http HTTP support in wxProtocol
- --enable-protocol-ftp FTP support in wxProtocol
- --enable-protocol-file FILE support in wxProtocol
- --enable-threads use threads
- --enable-docview use document view architecture
- --enable-help use help subsystem
- --enable-mshtmlhelp use MS HTML Help (win32)
- --enable-html use wxHTML sub-library
- --enable-htmlhelp use wxHTML-based help
- --enable-constraints use layout-constraints system
- --enable-printarch use printing architecture
- --enable-mdi use multiple document interface architecture
- --enable-loggui use standard GUI logger
- --enable-logwin use wxLogWindow
- --enable-logdialog use wxLogDialog
- --enable-postscript use wxPostscriptDC device context (default for gtk+)
- --enable-prologio use Prolog IO library
- --enable-resources use wxWindows resources
- --enable-xresources use X resources for save (default for gtk+)
- --enable-clipboard use wxClipboard classes
- --enable-dnd use Drag'n'Drop classes
- --enable-metafile use win32 metafiles
- --enable-treelayout use wxTreeLayout classes
- --enable-controls use all usual controls
- --enable-accel use accelerators
- --enable-button use wxButton class
- --enable-bmpbutton use wxBitmapButton class
- --enable-calendar use wxCalendarCtrl class
- --enable-caret use wxCaret class
- --enable-checkbox use wxCheckBox class
- --enable-checklst use wxCheckListBox (listbox with checkboxes) class
- --enable-choice use wxChoice class
- --enable-combobox use wxComboBox classes
- --enable-gauge use wxGauge class
- --enable-grid use wxGrid class
- --enable-newgrid use new wxGrid class
- --enable-imaglist use wxImageList class
- --enable-listbox use wxListBox class
- --enable-listctrl use wxListCtrl class
- --enable-notebook use wxNotebook class
- --enable-propsheet use wxPropertySheet class
- --enable-radiobox use wxRadioBox class
- --enable-radiobtn use wxRadioButton class
- --enable-sash use wxSashWindow class
- --enable-scrollbar use wxScrollBar class and scrollable windows
- --enable-slider use wxSlider class
- --enable-spinbtn use wxSpinButton class
- --enable-spinctrl use wxSpinCtrl class
- --enable-splitter use wxSplitterWindow class
- --enable-statbmp use wxStaticBitmap class
- --enable-statbox use wxStaticBox class
- --enable-statline use wxStaticLine class
- --enable-stattext use wxStaticText class
- --enable-statusbar use wxStatusBar class
- --enable-tabdialog use wxTabControl class
- --enable-textctrl use wxTextCtrl class
- --enable-togglebtn use wxToggleButton class
- --enable-toolbar use wxToolBar class
- --enable-tbarnative use native wxToolBar class
- --enable-tbarsmpl use wxToolBarSimple class
- --enable-treectrl use wxTreeCtrl class
- --enable-tipwindow use wxTipWindow class
- --enable-popupwin use wxPopUpWindow class
- --enable-commondlg use all common dialogs
- --enable-choicedlg use wxChoiceDialog
- --enable-coldlg use wxColourDialog
- --enable-filedlg use wxFileDialog
- --enable-finddlg use wxFindReplaceDialog
- --enable-fontdlg use wxFontDialog
- --enable-dirdlg use wxDirDialog
- --enable-msgdlg use wxMessageDialog
- --enable-numberdlg use wxNumberEntryDialog
- --enable-splash use wxSplashScreen
- --enable-textdlg use wxTextDialog
- --enable-tipdlg use startup tips
- --enable-progressdlg use wxProgressDialog
- --enable-wizarddlg use wxWizard
- --enable-menus use wxMenu/wxMenuBar/wxMenuItem classes
- --enable-miniframe use wxMiniFrame class
- --enable-tooltips use wxToolTip class
- --enable-splines use spline drawing code
- --enable-validators use wxValidator and derived classes
- --enable-busyinfo use wxBusyInfo
- --enable-joystick use wxJoystick (Linux only)
- --enable-metafiles use wxMetaFile (Windows only)
- --enable-dragimage use wxDragImage
- --enable-palette use wxPalette class
- --enable-image use wxImage class
- --enable-gif use gif images (GIF file format)
- --enable-pcx use pcx images (PCX file format)
- --enable-iff use iff images (IFF file format)
- --enable-pnm use pnm images (PNM file format)
- --enable-xpm use xpm images (XPM file format)
- --enable-icocur use Windows ICO and CUR formats
- --disable-largefile omit support for large files
- --disable-gtktest do not try to compile and run a test GTK+ program
- --disable-gtktest Do not try to compile and run a test GTK program
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gtk use GTK+
- --with-motif use Motif/Lesstif
- --with-mac use Mac OS X
- --with-wine use WINE
- --with-msw use MS-Windows
- --with-pm use OS/2 Presentation Manager
- --with-mgl use SciTech MGL
- --with-microwin use MicroWindows
- --with-x11 use X11
- --with-libpng use libpng (PNG image format)
- --with-libjpeg use libjpeg (JPEG file format)
- --with-libtiff use libtiff (TIFF file format)
- --with-opengl use OpenGL (or Mesa)
- --with-dmalloc use dmalloc library (http://dmalloc.com/)
- --with-regex enable support for wxRegEx class
- --with-zlib use zlib for LZW compression
- --with-odbc use the IODBC and wxODBC classes
- --with-gtk-prefix=PFX Prefix where GTK is installed (optional)
- --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)
- --with-x use the X Window System
- --with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
- CPP C preprocessor
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- CXXCPP C++ preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-EOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
- for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
- cd $ac_subdir
- # A "../" for each directory in /$ac_subdir.
- ac_dots=`echo $ac_subdir |
- sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`
-
- case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_sub_srcdir=$srcdir ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_sub_srcdir=$srcdir/$ac_subdir ;;
- *) # Relative path.
- ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
- esac
-
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_sub_srcdir/configure.gnu; then
- echo
- $SHELL $ac_sub_srcdir/configure.gnu --help=recursive
- elif test -f $ac_sub_srcdir/configure; then
- echo
- $SHELL $ac_sub_srcdir/configure --help=recursive
- elif test -f $ac_sub_srcdir/configure.ac ||
- test -f $ac_sub_srcdir/configure.in; then
- echo
- $ac_configure --help
- else
- echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
- fi
- cd $ac_popdir
- done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
- cat <<\EOF
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-EOF
- exit 0
-fi
-exec 5>config.log
-cat >&5 <<EOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.52. Invocation command line was
-
- $ $0 $@
-
-EOF
-{
-cat <<_ASUNAME
-## ---------- ##
-## Platform. ##
-## ---------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-PATH = $PATH
-
-_ASUNAME
-} >&5
-
-cat >&5 <<EOF
-## ------------ ##
-## Core tests. ##
-## ------------ ##
-
-EOF
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell meta-characters.
-ac_configure_args=
-ac_sep=
-for ac_arg
-do
- case $ac_arg in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- ac_sep=" " ;;
- *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
- ac_sep=" " ;;
- esac
- # Get rid of the leading space.
-done
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- echo >&5
- echo "## ----------------- ##" >&5
- echo "## Cache variables. ##" >&5
- echo "## ----------------- ##" >&5
- echo >&5
- # The following way of writing the cache mishandles newlines in values,
-{
- (set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
- *)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} >&5
- sed "/^$/d" confdefs.h >conftest.log
- if test -s conftest.log; then
- echo >&5
- echo "## ------------ ##" >&5
- echo "## confdefs.h. ##" >&5
- echo "## ------------ ##" >&5
- echo >&5
- cat conftest.log >&5
- fi
- (echo; echo) >&5
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal" >&5
- echo "$as_me: exit $exit_status" >&5
- rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
- exit $exit_status
- ' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
projects / wxWidgets.git / blobdiff