\setheader{{\it CHAPTER \thechapter}}{}{}{}{}{{\it CHAPTER \thechapter}}%
\setfooter{\thepage}{}{}{}{}{\thepage}
-The functions and macros defined in wxWindows are described here.
+The functions and macros defined in wxWindows are described here: you can
+either look up a function using the alphabetical listing of them or find it in
+the corresponding topic.
+
+\section{Alphabetical functions and macros list}
+
+\helpref{CLASSINFO}{classinfo}\\
+\helpref{copystring}{copystring}\\
+\helpref{DECLARE\_ABSTRACT\_CLASS}{declareabstractclass}\\
+\helpref{DECLARE\_APP}{declareapp}\\
+\helpref{DECLARE\_CLASS}{declareclass}\\
+\helpref{DECLARE\_DYNAMIC\_CLASS}{declaredynamicclass}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS2}{implementabstractclass2}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS}{implementabstractclass}\\
+\helpref{IMPLEMENT\_APP}{implementapp}\\
+\helpref{IMPLEMENT\_CLASS2}{implementclass2}\\
+\helpref{IMPLEMENT\_CLASS}{implementclass}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS2}{implementdynamicclass2}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS}{implementdynamicclass}\\
+\helpref{WXDEBUG\_NEW}{debugnew}\\
+\helpref{WXTRACELEVEL}{tracelevel}\\
+\helpref{WXTRACE}{trace}\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}\\
+\helpref{wxASSERT\_MSG}{wxassertmsg}\\
+\helpref{wxASSERT}{wxassert}\\
+\helpref{wxBITMAP}{wxbitmapmacro}\\
+\helpref{wxBeginBusyCursor}{wxbeginbusycursor}\\
+\helpref{wxBell}{wxbell}\\
+\helpref{wxCHECK2\_MSG}{wxcheck2msg}\\
+\helpref{wxCHECK2}{wxcheck2}\\
+\helpref{wxCHECK\_MSG}{wxcheckmsg}\\
+\helpref{wxCHECK\_RET}{wxcheckret}\\
+\helpref{wxCHECK\_VERSION}{wxcheckversion}\\
+\helpref{wxCHECK}{wxcheck}\\
+\helpref{wxClientDisplayRect}{wxclientdisplayrect}\\
+\helpref{wxClipboardOpen}{functionwxclipboardopen}\\
+\helpref{wxCloseClipboard}{wxcloseclipboard}\\
+\helpref{wxColourDisplay}{wxcolourdisplay}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}\\
+\helpref{wxConcatFiles}{wxconcatfiles}\\
+\helpref{wxConstCast}{wxconstcast}\\
+\helpref{wxCopyFile}{wxcopyfile}\\
+\helpref{wxCreateDynamicObject}{wxcreatedynamicobject}\\
+\helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider}\\
+\helpref{wxDDECleanUp}{wxddecleanup}\\
+\helpref{wxDDEInitialize}{wxddeinitialize}\\
+\helpref{wxDROP\_ICON}{wxdropicon}\\
+\helpref{wxDebugMsg}{wxdebugmsg}\\
+\helpref{wxDirExists}{functionwxdirexists}\\
+\helpref{wxDirSelector}{wxdirselector}\\
+\helpref{wxDisplayDepth}{wxdisplaydepth}\\
+\helpref{wxDisplaySize}{wxdisplaysize}\\
+\helpref{wxDisplaySizeMM}{wxdisplaysizemm}\\
+\helpref{wxDos2UnixFilename}{wxdos2unixfilename}\\
+\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
+\helpref{wxDynamicCast}{wxdynamiccast}\\
+\helpref{wxEmptyClipboard}{wxemptyclipboard}\\
+\helpref{wxEnableTopLevelWindows}{wxenabletoplevelwindows}\\
+\helpref{wxEndBusyCursor}{wxendbusycursor}\\
+\helpref{wxEntry}{wxentry}\\
+\helpref{wxEnumClipboardFormats}{wxenumclipboardformats}\\
+\helpref{wxError}{wxerror}\\
+\helpref{wxExecute}{wxexecute}\\
+\helpref{wxExit}{wxexit}\\
+\helpref{wxFAIL\_MSG}{wxfailmsg}\\
+\helpref{wxFAIL}{wxfail}\\
+\helpref{wxFatalError}{wxfatalerror}\\
+\helpref{wxFileExists}{functionwxfileexists}\\
+\helpref{wxFileModificationTime}{wxfilemodificationtime}\\
+\helpref{wxFileNameFromPath}{wxfilenamefrompath}\\
+\helpref{wxFileSelector}{wxfileselector}\\
+\helpref{wxFindFirstFile}{wxfindfirstfile}\\
+\helpref{wxFindMenuItemId}{wxfindmenuitemid}\\
+\helpref{wxFindNextFile}{wxfindnextfile}\\
+\helpref{wxFindWindowAtPointer}{wxfindwindowatpointer}\\
+\helpref{wxFindWindowAtPoint}{wxfindwindowatpoint}\\
+\helpref{wxFindWindowByLabel}{wxfindwindowbylabel}\\
+\helpref{wxFindWindowByName}{wxfindwindowbyname}\\
+\helpref{wxGetActiveWindow}{wxgetactivewindow}\\
+\helpref{wxGetClipboardData}{wxgetclipboarddata}\\
+\helpref{wxGetClipboardFormatName}{wxgetclipboardformatname}\\
+\helpref{wxGetColourFromUser}{wxgetcolourfromuser}\\
+\helpref{wxGetCwd}{wxgetcwd}\\
+\helpref{wxGetDiskSpace}{wxgetdiskspace}\\
+\helpref{wxGetDisplayName}{wxgetdisplayname}\\
+\helpref{wxGetElapsedTime}{wxgetelapsedtime}\\
+\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
+\helpref{wxGetEnv}{wxgetenv}\\
+\helpref{wxGetFontFromUser}{wxgetfontfromuser}\\
+\helpref{wxGetFreeMemory}{wxgetfreememory}\\
+\helpref{wxGetFullHostName}{wxgetfullhostname}\\
+\helpref{wxGetHomeDir}{wxgethomedir}\\
+\helpref{wxGetHostName}{wxgethostname}\\
+\helpref{wxGetLocalTimeMillis}{wxgetlocaltimemillis}\\
+\helpref{wxGetLocalTime}{wxgetlocaltime}\\
+\helpref{wxGetMousePosition}{wxgetmouseposition}\\
+\helpref{wxGetMultipleChoices}{wxgetmultiplechoices}\\
+\helpref{wxGetMultipleChoice}{wxgetmultiplechoice}\\
+\helpref{wxGetNumberFromUser}{wxgetnumberfromuser}\\
+\helpref{wxGetOSDirectory}{wxgetosdirectory}\\
+\helpref{wxGetOsDescription}{wxgetosdescription}\\
+\helpref{wxGetOsVersion}{wxgetosversion}\\
+\helpref{wxGetPasswordFromUser}{wxgetpasswordfromuser}\\
+\helpref{wxGetPrinterCommand}{wxgetprintercommand}\\
+\helpref{wxGetPrinterFile}{wxgetprinterfile}\\
+\helpref{wxGetPrinterMode}{wxgetprintermode}\\
+\helpref{wxGetPrinterOptions}{wxgetprinteroptions}\\
+\helpref{wxGetPrinterOrientation}{wxgetprinterorientation}\\
+\helpref{wxGetPrinterPreviewCommand}{wxgetprinterpreviewcommand}\\
+\helpref{wxGetPrinterScaling}{wxgetprinterscaling}\\
+\helpref{wxGetPrinterTranslation}{wxgetprintertranslation}\\
+\helpref{wxGetResource}{wxgetresource}\\
+\helpref{wxGetSingleChoiceData}{wxgetsinglechoicedata}\\
+\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex}\\
+\helpref{wxGetSingleChoice}{wxgetsinglechoice}\\
+\helpref{wxGetTempFileName}{wxgettempfilename}\\
+\helpref{wxGetTextFromUser}{wxgettextfromuser}\\
+\helpref{wxGetTopLevelParent}{wxgettoplevelparent}\\
+\helpref{wxGetTranslation}{wxgettranslation}\\
+\helpref{wxGetUTCTime}{wxgetutctime}\\
+\helpref{wxGetUserHome}{wxgetuserhome}\\
+\helpref{wxGetUserId}{wxgetuserid}\\
+\helpref{wxGetUserName}{wxgetusername}\\
+\helpref{wxGetWorkingDirectory}{wxgetworkingdirectory}\\
+\helpref{wxGetenv}{wxgetenvmacro}\\
+\helpref{wxHandleFatalExceptions}{wxhandlefatalexceptions}\\
+\helpref{wxICON}{wxiconmacro}\\
+\helpref{wxINTXX\_SWAP\_ALWAYS}{intswapalways}\\
+\helpref{wxINTXX\_SWAP\_ON\_BE}{intswaponbe}\\
+\helpref{wxINTXX\_SWAP\_ON\_LE}{intswaponle}\\
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}\\
+\helpref{wxInitialize}{wxinitialize}\\
+\helpref{wxIsAbsolutePath}{wxisabsolutepath}\\
+\helpref{wxIsBusy}{wxisbusy}\\
+\helpref{wxIsClipboardFormatAvailable}{wxisclipboardformatavailable}\\
+\helpref{wxIsEmpty}{wxisempty}\\
+\helpref{wxIsWild}{wxiswild}\\
+\helpref{wxKill}{wxkill}\\
+\helpref{wxLoadUserResource}{wxloaduserresource}\\
+\helpref{wxLogDebug}{wxlogdebug}\\
+\helpref{wxLogError}{wxlogerror}\\
+\helpref{wxLogFatalError}{wxlogfatalerror}\\
+\helpref{wxLogMessage}{wxlogmessage}\\
+\helpref{wxLogStatus}{wxlogstatus}\\
+\helpref{wxLogSysError}{wxlogsyserror}\\
+\helpref{wxLogTrace}{wxlogtrace}\\
+\helpref{wxLogVerbose}{wxlogverbose}\\
+\helpref{wxLogWarning}{wxlogwarning}\\
+\helpref{wxMakeMetafilePlaceable}{wxmakemetafileplaceable}\\
+\helpref{wxMatchWild}{wxmatchwild}\\
+\helpref{wxMessageBox}{wxmessagebox}\\
+\helpref{wxMkdir}{wxmkdir}\\
+\helpref{wxMutexGuiEnter}{wxmutexguienter}\\
+\helpref{wxMutexGuiLeave}{wxmutexguileave}\\
+\helpref{wxNewId}{wxnewid}\\
+\helpref{wxNow}{wxnow}\\
+\helpref{wxOnAssert}{wxonassert}\\
+\helpref{wxOpenClipboard}{wxopenclipboard}\\
+\helpref{wxPathOnly}{wxpathonly}\\
+\helpref{wxPostDelete}{wxpostdelete}\\
+\helpref{wxPostEvent}{wxpostevent}\\
+\helpref{wxRegisterClipboardFormat}{wxregisterclipboardformat}\\
+\helpref{wxRegisterId}{wxregisterid}\\
+\helpref{wxRemoveFile}{wxremovefile}\\
+\helpref{wxRenameFile}{wxrenamefile}\\
+\helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}\\
+\helpref{wxResourceClear}{wxresourceclear}\\
+\helpref{wxResourceCreateBitmap}{wxresourcecreatebitmap}\\
+\helpref{wxResourceCreateIcon}{wxresourcecreateicon}\\
+\helpref{wxResourceCreateMenuBar}{wxresourcecreatemenubar}\\
+\helpref{wxResourceGetIdentifier}{wxresourcegetidentifier}\\
+\helpref{wxResourceParseData}{wxresourcedata}\\
+\helpref{wxResourceParseFile}{wxresourceparsefile}\\
+\helpref{wxResourceParseString}{wxresourceparsestring}\\
+\helpref{wxResourceRegisterBitmapData}{registerbitmapdata}\\
+\helpref{wxResourceRegisterIconData}{wxresourceregistericondata}\\
+\helpref{wxRmdir}{wxrmdir}\\
+\helpref{wxSafeYield}{wxsafeyield}\\
+\helpref{wxSetClipboardData}{wxsetclipboarddata}\\
+\helpref{wxSetCursor}{wxsetcursor}\\
+\helpref{wxSetDisplayName}{wxsetdisplayname}\\
+\helpref{wxSetEnv}{wxsetenv}\\
+\helpref{wxSetPrinterCommand}{wxsetprintercommand}\\
+\helpref{wxSetPrinterFile}{wxsetprinterfile}\\
+\helpref{wxSetPrinterMode}{wxsetprintermode}\\
+\helpref{wxSetPrinterOptions}{wxsetprinteroptions}\\
+\helpref{wxSetPrinterOrientation}{wxsetprinterorientation}\\
+\helpref{wxSetPrinterPreviewCommand}{wxsetprinterpreviewcommand}\\
+\helpref{wxSetPrinterScaling}{wxsetprinterscaling}\\
+\helpref{wxSetPrinterTranslation}{wxsetprintertranslation}\\
+\helpref{wxSetWorkingDirectory}{wxsetworkingdirectory}\\
+\helpref{wxShell}{wxshell}\\
+\helpref{wxShowTip}{wxshowtip}\\
+\helpref{wxSleep}{wxsleep}\\
+\helpref{wxSnprintf}{wxsnprintf}\\
+\helpref{wxSplitPath}{wxsplitfunction}\\
+\helpref{wxStartTimer}{wxstarttimer}\\
+\helpref{wxStaticCast}{wxstaticcast}\\
+\helpref{wxStricmp}{wxstricmp}\\
+\helpref{wxStringEq}{wxstringeq}\\
+\helpref{wxStringMatch}{wxstringmatch}\\
+\helpref{wxStripMenuCodes}{wxstripmenucodes}\\
+\helpref{wxStrlen}{wxstrlen}\\
+\helpref{wxSysErrorCode}{wxsyserrorcode}\\
+\helpref{wxSysErrorMsg}{wxsyserrormsg}\\
+\helpref{wxToLower}{wxtolower}\\
+\helpref{wxToUpper}{wxtoupper}\\
+\helpref{wxTraceLevel}{wxtracelevel}\\
+\helpref{wxTrace}{wxtrace}\\
+\helpref{wxTransferFileToStream}{wxtransferfiletostream}\\
+\helpref{wxTransferStreamToFile}{wxtransferstreamtofile}\\
+\helpref{wxTrap}{wxtrap}\\
+\helpref{wxUninitialize}{wxuninitialize}\\
+\helpref{wxUnix2DosFilename}{wxunix2dosfilename}\\
+\helpref{wxUnsetEnv}{wxunsetenv}\\
+\helpref{wxUsleep}{wxusleep}\\
+\helpref{wxVsnprintf}{wxvsnprintf}\\
+\helpref{wxWakeUpIdle}{wxwakeupidle}\\
+\helpref{wxWriteResource}{wxwriteresource}\\
+\helpref{wxYield}{wxyield}
\section{Version macros}\label{versionfunctions}
\begin{itemize}\itemsep=0pt
\item {\tt wxMAJOR\_VERSION} is the major version of wxWindows
\item {\tt wxMINOR\_VERSION} is the minor version of wxWindows
-\item {\tt wxRELASE\_NUMBER} is the release number
+\item {\tt wxRELEASE\_NUMBER} is the release number
\end{itemize}
For example, the values or these constants for wxWindows 2.1.15 are 2, 1 and
}
\end{verbatim}
+\section{Application initialization and termination}\label{appinifunctions}
+
+The functions in this section are used on application startup/shutdown and also
+to control the behaviour of the main event loop of the GUI programs.
+
+\membersection{::wxEntry}\label{wxentry}
+
+This initializes wxWindows in a platform-dependent way. Use this if you
+are not using the default wxWindows entry code (e.g. main or WinMain). For example,
+you can initialize wxWindows from an Microsoft Foundation Classes application using
+this function.
+
+\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
+ \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = TRUE}}
+
+wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is FALSE, the
+function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
+message loop will be entered.
+
+\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
+ \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
+
+wxWindows initialization under Windows (for applications constructed as a DLL).
+
+\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
+
+wxWindows initialization under Unix.
+
+\wxheading{Remarks}
+
+To clean up wxWindows, call wxApp::OnExit followed by the static function
+wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
+
+\begin{verbatim}
+int CTheApp::ExitInstance()
+{
+ // OnExit isn't called by CleanUp so must be called explicitly.
+ wxTheApp->OnExit();
+ wxApp::CleanUp();
+
+ return CWinApp::ExitInstance();
+}
+\end{verbatim}
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
+
+\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = TRUE}}
+
+If {\it doIt} is TRUE, the fatal exceptions (also known as general protection
+faults under Windows or segmentation violations in the Unix world) will be
+caught and passed to \helpref{wxApp::OnFatalException}{wxapponfatalexception}.
+By default, i.e. before this function is called, they will be handled in the
+normal way which usually just means that the application will be terminated.
+Calling wxHandleFatalExceptions() with {\it doIt} equal to FALSE will restore
+this default behaviour.
+
+\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
+
+\func{void}{wxInitAllImageHandlers}{\void}
+
+Initializes all available image handlers. For a list of available handlers,
+see \helpref{wxImage}{wximage}.
+
+\wxheading{See also}
+
+\helpref{wxImage}{wximage}, \helpref{wxImageHandler}{wximagehandler}
+
+\wxheading{Include files}
+
+<wx/image.h>
+
+\membersection{::wxInitialize}\label{wxinitialize}
+
+\func{bool}{wxInitialize}{\void}
+
+This function is used in wxBase only and only if you don't create
+\helpref{wxApp}{wxapp} object at all. In this case you must call it from your
+{\tt main()} function before calling any other wxWindows functions.
+
+If the function returns {\tt FALSE} the initialization could not be performed,
+in this case the library cannot be used and
+\helpref{wxUninitialize}{wxuninitialize} shouldn't be called neither.
+
+This function may be called several times but
+\helpref{wxUninitialize}{wxuninitialize} must be called for each successful
+call to this function.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+\membersection{::wxSafeYield}\label{wxsafeyield}
+
+\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}}
+
+This function is similar to wxYield, except that it disables the user input to
+all program windows before calling wxYield and re-enables it again
+afterwards. If {\it win} is not NULL, this window will remain enabled,
+allowing the implementation of some limited user interaction.
+
+Returns the result of the call to \helpref{::wxYield}{wxyield}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxUninitialize}\label{wxuninitialize}
+
+\func{void}{wxUninitialize}{\void}
+
+This function is for use in console (wxBase) programs only. It must be called
+once for each previous successful call to \helpref{wxInitialize}{wxinitialize}.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+\membersection{::wxYield}\label{wxyield}
+
+\func{bool}{wxYield}{\void}
+
+Calls \helpref{wxApp::Yield}{wxappyield}.
+
+This function is kept only for backwards compatibility, please use
+\helpref{wxApp::Yield}{wxappyield}method instead in any new code.
+
+\wxheading{Include files}
+
+<wx/app.h> or <wx/utils.h>
+
+\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
+
+\func{void}{wxWakeUpIdle}{\void}
+
+This functions wakes up the (internal and platform dependent) idle system, i.e. it
+will force the system to send an idle event even if the system currently {\it is}
+ idle and thus would not send any idle event until after some other event would get
+sent. This is also useful for sending events between two threads and is used by
+the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
+\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+\section{Process control functions}\label{processfunctions}
+
+The functions in this section are used to launch or terminate the other
+processes.
+
+\membersection{::wxExecute}\label{wxexecute}
+
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{int }{sync = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
+
+\func{long}{wxExecute}{\param{char **}{argv}, \param{int }{flags = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
+
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}}
+
+\perlnote{In wxPerl this function only takes the {\tt command} argument,
+and returns a 2-element list {\tt ( status, output )}, where {\tt output} is
+an array reference.}
+
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}}
+
+\perlnote{In wxPerl this function only takes the {\tt command} argument,
+and returns a 3-element list {\tt ( status, output, errors )}, where
+{\tt output} and {\tt errors} are array references.}
+
+Executes another program in Unix or Windows.
+
+The first form takes a command string, such as {\tt "emacs file.txt"}.
+
+The second form takes an array of values: a command, any number of
+arguments, terminated by NULL.
+
+The semantics of the third and fourth versions is different from the first two
+and is described in more details below.
+
+If {\it flags} parameter contains {\tt wxEXEC\_ASYNC} flag (the default), flow
+of control immediately returns. If it contains {\tt wxEXEC\_SYNC}, the current
+application waits until the other program has terminated.
+
+In the case of synchronous execution, the return value is the exit code of
+the process (which terminates by the moment the function returns) and will be
+$-1$ if the process couldn't be started and typically 0 if the process
+terminated successfully. Also, while waiting for the process to
+terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
+should ensure that this can cause no recursion, in the simplest case by
+calling \helpref{wxEnableTopLevelWindows(FALSE)}{wxenabletoplevelwindows}.
+
+For asynchronous execution, however, the return value is the process id and
+zero value indicates that the command could not be executed. As an added
+complication, the return value of $-1$ in this case indicattes that we didn't
+launch a new process, but connected to the running one (this can only happen in
+case of using DDE under Windows for command execution). In particular, in this,
+and only this, case the calling code will not get the notification about
+process termination.
+
+If callback isn't NULL and if execution is asynchronous,
+\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
+the process finishes. Specifying this parameter also allows you to redirect the
+standard input and/or output of the process being launched by calling
+\helpref{Redirect}{wxprocessredirect}. If the child process IO is redirected,
+under Windows the process window is not shown by default (this avoids having to
+flush an unnecessary console for the processes which don't create any windows
+anyhow) but a {\tt wxEXEC\_NOHIDE} flag can be used to prevent this from
+happening, i.e. with this flag the child process window will be shown normally.
+
+Under Unix the flag {\tt wxEXEC\_MAKE\_GROUP\_LEADER} may be used to ensure
+that the new process is a group leader (this will create a new session if
+needed). Calling \helpref{wxKill}{wxkill} with the argument of -pid where pid
+is the process ID of the new process will kill this process as well as all of
+its children (except those which have started their own session).
+
+Finally, you may use the third overloaded version of this function to execute
+a process (always synchronously) and capture its output in the array
+{\it output}. The fourth version adds the possibility to additionally capture
+the messages from standard error output in the {\it errors} array.
+
+See also \helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess},
+\helpref{Exec sample}{sampleexec}.
+
+\wxheading{Parameters}
+
+\docparam{command}{The command to execute and any parameters to pass to it as a
+single string.}
+
+\docparam{argv}{The command to execute should be the first element of this
+array, any additional ones are the command parameters and the array must be
+terminated with a NULL pointer.}
+
+\docparam{flags}{Combination of bit masks {\tt wxEXEC\_ASYNC},
+{\tt wxEXEC\_SYNC} and {\tt wxEXEC\_NOHIDE}}
+
+\docparam{callback}{An optional pointer to \helpref{wxProcess}{wxprocess}}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxExit}\label{wxexit}
+
+\func{void}{wxExit}{\void}
+
+Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
+Should only be used in an emergency: normally the top-level frame
+should be deleted (after deleting all other frames) to terminate the
+application. See \helpref{wxCloseEvent}{wxcloseevent} and \helpref{wxApp}{wxapp}.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+\membersection{::wxKill}\label{wxkill}
+
+\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}}
+
+Equivalent to the Unix kill function: send the given signal {\it sig} to the
+process with PID {\it pid}. The valud signal values are
+
+\begin{verbatim}
+enum wxSignal
+{
+ wxSIGNONE = 0, // verify if the process exists under Unix
+ wxSIGHUP,
+ wxSIGINT,
+ wxSIGQUIT,
+ wxSIGILL,
+ wxSIGTRAP,
+ wxSIGABRT,
+ wxSIGEMT,
+ wxSIGFPE,
+ wxSIGKILL, // forcefully kill, dangerous!
+ wxSIGBUS,
+ wxSIGSEGV,
+ wxSIGSYS,
+ wxSIGPIPE,
+ wxSIGALRM,
+ wxSIGTERM // terminate the process gently
+};
+\end{verbatim}
+
+{\tt wxSIGNONE}, {\tt wxSIGKILL} and {\tt wxSIGTERM} have the same meaning
+under both Unix and Windows but all the other signals are equivalent to
+{\tt wxSIGTERM} under Windows.
+
+Returns 0 on success, -1 on failure. If {\it rc} parameter is not NULL, it will
+be filled with an element of {\tt wxKillError} enum:
+
+\begin{verbatim}
+enum wxKillError
+{
+ wxKILL_OK, // no error
+ wxKILL_BAD_SIGNAL, // no such signal
+ wxKILL_ACCESS_DENIED, // permission denied
+ wxKILL_NO_PROCESS, // no such process
+ wxKILL_ERROR // another, unspecified error
+};
+\end{verbatim}
+
+\wxheading{See also}
+
+\helpref{wxProcess::Kill}{wxprocesskill},\rtfsp
+\helpref{wxProcess::Exists}{wxprocessexists},\rtfsp
+\helpref{Exec sample}{sampleexec}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxShell}\label{wxshell}
+
+\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
+
+Executes a command in an interactive shell window. If no command is
+specified, then just the shell is spawned.
+
+See also \helpref{wxExecute}{wxexecute}, \helpref{Exec sample}{sampleexec}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\section{Thread functions}\label{threadfunctions}
\wxheading{Include files}
\wxheading{See also}
-\helpref{wxPathList}{wxpathlist}, \helpref{wxDir}{wxdir}, \helpref{wxFile}{wxfile}
+\helpref{wxPathList}{wxpathlist}\\
+\helpref{wxDir}{wxdir}\\
+\helpref{wxFile}{wxfile}\\
+\helpref{wxFileName}{wxfilename}
-\membersection{::wxDirExists}
+\membersection{::wxDirExists}\label{functionwxdirexists}
\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
Returns TRUE if the directory exists.
-\membersection{::wxDos2UnixFilename}
+\membersection{::wxDos2UnixFilename}\label{wxdos2unixfilename}
\func{void}{wxDos2UnixFilename}{\param{wxChar *}{s}}
Converts a DOS to a Unix filename by replacing backslashes with forward
slashes.
-\membersection{::wxFileExists}
+\membersection{::wxFileExists}\label{functionwxfileexists}
\func{bool}{wxFileExists}{\param{const wxString\& }{filename}}
Returns time of last modification of given file.
-\membersection{::wxFileNameFromPath}
+\membersection{::wxFileNameFromPath}\label{wxfilenamefrompath}
\func{wxString}{wxFileNameFromPath}{\param{const wxString\& }{path}}
-\func{char*}{wxFileNameFromPath}{\param{char* }{path}}
+\func{char *}{wxFileNameFromPath}{\param{char *}{path}}
Returns the filename for a full path. The second form returns a pointer to
temporary storage that should not be deallocated.
\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
-\func{wxString}{wxFindFirstFile}{\param{const char*}{spec}, \param{int}{ flags = 0}}
+\func{wxString}{wxFindFirstFile}{\param{const char *}{spec}, \param{int}{ flags = 0}}
This function does directory searching; returns the first file
that matches the path {\it spec}, or the empty string. Use \helpref{wxFindNextFile}{wxfindnextfile} to
See \helpref{wxFindFirstFile}{wxfindfirstfile} for an example.
+\membersection{::wxGetDiskSpace}\label{wxgetdiskspace}
+
+\func{bool}{wxGetDiskSpace}{\param{const wxString\& }{path}, \param{wxLongLong }{*total = NULL}, \param{wxLongLong }{*free = NULL}}
+
+This function returns the total number of bytes and number of free bytes on
+the disk containing the directory {\it path} (it should exist). Both
+{\it total} and {\it free} parameters may be {\tt NULL} if the corresponding
+information is not needed.
+
+\wxheading{Returns}
+
+{\tt TRUE} on success, {\tt FALSE} if an error occured (for example, the
+directory doesn't exist).
+
+\wxheading{Portability}
+
+This function is implemented for Win16 (only for drives less than 2Gb), Win32,
+Mac OS and generic Unix provided the system has {\tt statfs()} function.
+
+This function first appeared in wxWindows 2.3.2.
+
\membersection{::wxGetOSDirectory}\label{wxgetosdirectory}
\func{wxString}{wxGetOSDirectory}{\void}
Returns the Windows directory under Windows; on other platforms returns the empty string.
-\membersection{::wxIsAbsolutePath}
+\membersection{::wxIsAbsolutePath}\label{wxisabsolutepath}
\func{bool}{wxIsAbsolutePath}{\param{const wxString\& }{filename}}
Returns TRUE if the argument is an absolute filename, i.e. with a slash
or drive name at the beginning.
-\membersection{::wxPathOnly}
+\membersection{::wxPathOnly}\label{wxpathonly}
\func{wxString}{wxPathOnly}{\param{const wxString\& }{path}}
Returns the directory part of the filename.
-\membersection{::wxUnix2DosFilename}
+\membersection{::wxUnix2DosFilename}\label{wxunix2dosfilename}
\func{void}{wxUnix2DosFilename}{\param{const wxString\& }{s}}
Converts a Unix to a DOS filename by replacing forward
slashes with backslashes.
-\membersection{::wxConcatFiles}
+\membersection{::wxConcatFiles}\label{wxconcatfiles}
\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
\param{const wxString\& }{file3}}
Concatenates {\it file1} and {\it file2} to {\it file3}, returning
TRUE if successful.
-\membersection{::wxCopyFile}
+\membersection{::wxCopyFile}\label{wxcopyfile}
\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = TRUE}}
Returns a string containing the current (or working) directory.
-\membersection{::wxGetWorkingDirectory}
+\membersection{::wxGetWorkingDirectory}\label{wxgetworkingdirectory}
-\func{wxString}{wxGetWorkingDirectory}{\param{char*}{buf=NULL}, \param{int }{sz=1000}}
+\func{wxString}{wxGetWorkingDirectory}{\param{char *}{buf=NULL}, \param{int }{sz=1000}}
This function is obsolete: use \helpref{wxGetCwd}{wxgetcwd} instead.
{\it sz} is the size of the buffer if supplied.
-\membersection{::wxGetTempFileName}
+\membersection{::wxGetTempFileName}\label{wxgettempfilename}
-\func{char*}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char* }{buf=NULL}}
+\func{char *}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char *}{buf=NULL}}
\func{bool}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{wxString\& }{buf}}
-Makes a temporary filename based on {\it prefix}, opens and closes the file,
-and places the name in {\it buf}. If {\it buf} is NULL, new store
-is allocated for the temporary filename using {\it new}.
-
-Under Windows, the filename will include the drive and name of the
-directory allocated for temporary files (usually the contents of the
-TEMP variable). Under Unix, the {\tt /tmp} directory is used.
-
-It is the application's responsibility to create and delete the file.
+%% Makes a temporary filename based on {\it prefix}, opens and closes the file,
+%% and places the name in {\it buf}. If {\it buf} is NULL, new store
+%% is allocated for the temporary filename using {\it new}.
+%%
+%% Under Windows, the filename will include the drive and name of the
+%% directory allocated for temporary files (usually the contents of the
+%% TEMP variable). Under Unix, the {\tt /tmp} directory is used.
+%%
+%% It is the application's responsibility to create and delete the file.
+
+These functions are obsolete, please use\rtfsp
+\helpref{wxFileName::CreateTempFileName}{wxfilenamecreatetempfilename}\rtfsp
+instead.
\membersection{::wxIsWild}\label{wxiswild}
dot\_special}\/ is TRUE, filenames beginning with a dot are not matched
with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
-\membersection{::wxMkdir}
+\membersection{::wxMkdir}\label{wxmkdir}
\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
{\it perm} is the access mask for the directory for the systems on which it is
supported (Unix) and doesn't have effect for the other ones.
-\membersection{::wxRemoveFile}
+\membersection{::wxRemoveFile}\label{wxremovefile}
\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
Removes {\it file}, returning TRUE if successful.
-\membersection{::wxRenameFile}
+\membersection{::wxRenameFile}\label{wxrenamefile}
\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
Renames {\it file1} to {\it file2}, returning TRUE if successful.
-\membersection{::wxRmdir}
+\membersection{::wxRmdir}\label{wxrmdir}
\func{bool}{wxRmdir}{\param{const wxString\& }{dir}, \param{int}{ flags=0}}
The {\it flags} parameter is reserved for future use.
-\membersection{::wxSetWorkingDirectory}
+\membersection{::wxSetWorkingDirectory}\label{wxsetworkingdirectory}
\func{bool}{wxSetWorkingDirectory}{\param{const wxString\& }{dir}}
Copies the given file to {\it stream}. Useful when converting an old application to
use streams (within the document/view framework, for example).
-Use of this function requires the file wx\_doc.h to be included.
+\wxheading{Include files}
+
+<wx/docview.h>
\membersection{::wxTransferStreamToFile}\label{wxtransferstreamtofile}
Copies the given stream to the file {\it filename}. Useful when converting an old application to
use streams (within the document/view framework, for example).
-Use of this function requires the file wx\_doc.h to be included.
+\wxheading{Include files}
-\section{Network functions}\label{networkfunctions}
+<wx/docview.h>
-\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
+\section{Network, user and OS functions}\label{networkfunctions}
-\func{wxString}{wxGetFullHostName}{\void}
+The functions in this section are used to retrieve information about the
+current computer and/or user characteristics.
-Returns the FQDN (fully qualified domain host name) or an empty string on
-error.
+\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
+
+\func{long}{wxGetFreeMemory}{\void}
+
+Returns the amount of free memory in bytes under environments which
+support it, and -1 if not supported. Currently, it is supported only
+under Windows, Linux and Solaris.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
+
+\func{wxString}{wxGetFullHostName}{\void}
+
+Returns the FQDN (fully qualified domain host name) or an empty string on
+error.
\wxheading{See also}
<wx/utils.h>
+\membersection{::wxGetHomeDir}\label{wxgethomedir}
+
+\func{wxString}{wxGetHomeDir}{\void}
+
+Return the (current) user's home directory.
+
+\wxheading{See also}
+
+\helpref{wxGetUserHome}{wxgetuserhome}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxGetHostName}\label{wxgethostname}
\func{wxString}{wxGetHostName}{\void}
<wx/utils.h>
-\section{User identification}\label{useridfunctions}
-
\membersection{::wxGetUserId}\label{wxgetuserid}
\func{wxString}{wxGetUserId}{\void}
<wx/utils.h>
+\membersection{::wxGetOsDescription}\label{wxgetosdescription}
+
+\func{wxString}{wxGetOsDescription}{\void}
+
+Returns the string containing the description of the current platform in a
+user-readable form. For example, this function may return strings like
+{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
+
+\wxheading{See also}
+
+\helpref{::wxGetOsVersion}{wxgetosversion}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetOsVersion}\label{wxgetosversion}
+
+\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
+
+Gets operating system version information.
+
+\begin{twocollist}\itemsep=0pt
+\twocolitemruled{Platform}{Return types}
+\twocolitem{Mac OS}{Return value is wxMAC when compiled with CodeWarrior under Mac OS 8.x/9.x and Mac OS X, wxMAC\_DARWIN when compiled with the Apple Developer Tools under Mac OS X.}
+\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
+\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
+\twocolitem{OS/2}{Return value is wxOS2\_PM.}
+\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
+\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}}
+\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
+\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
+\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
+\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
+\end{twocollist}
+
+\wxheading{See also}
+
+\helpref{::wxGetOsDescription}{wxgetosdescription}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetUserHome}\label{wxgetuserhome}
+
+\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
+
+Returns the home directory for the given user. If the username is empty
+(default value), this function behaves like
+\helpref{wxGetHomeDir}{wxgethomedir}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxGetUserName}\label{wxgetusername}
\func{wxString}{wxGetUserName}{\void}
the PENWIN.INI file is used.
The first variant of this function returns the user name if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+empty string otherwise. The second (deprecated) function returns {\tt TRUE}
+if successful, {\tt FALSE} otherwise.
\wxheading{See also}
\section{String functions}
-\membersection{::copystring}
+\membersection{::copystring}\label{copystring}
-\func{char*}{copystring}{\param{const char* }{s}}
+\func{char *}{copystring}{\param{const char *}{s}}
Makes a copy of the string {\it s} using the C++ new operator, so it can be
deleted with the {\it delete} operator.
+This function is deprecated, use \helpref{wxString}{wxstring} class instead.
+
\membersection{::wxIsEmpty}\label{wxisempty}
-\func{bool}{IsEmpty}{\param{const char *}{ p}}
+\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
Returns {\tt TRUE} if the pointer is either {\tt NULL} or points to an empty
string, {\tt FALSE} otherwise.
\membersection{::wxStricmp}\label{wxstricmp}
-\func{int}{Stricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+\func{int}{wxStricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
Returns a negative value, 0, or positive value if {\it p1} is less than, equal
to or greater than {\it p2}. The comparison is case-insensitive.
This function complements the standard C function {\it strcmp()} which performs
case-sensitive comparison.
-\membersection{::wxStringMatch}
+\membersection{::wxStringMatch}\label{wxstringmatch}
\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
\param{bool}{ subString = TRUE}, \param{bool}{ exact = FALSE}}
\membersection{::wxStrlen}\label{wxstrlen}
-\func{size\_t}{Strlen}{\param{const char *}{ p}}
+\func{size\_t}{wxStrlen}{\param{const char *}{ p}}
This is a safe version of standard function {\it strlen()}: it does exactly the
same thing (i.e. returns the length of the string) except that it returns 0 if
\helpref{wxVsnprintf}{wxvsnprintf}, \helpref{wxString::Printf}{wxstringprintf}
+\membersection{::wxToLower}\label{wxtolower}
+
+\func{char}{wxToLower}{\param{char }{ch}}
+
+Converts the character to lower case. This is implemented as a macro for efficiency.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxToUpper}\label{wxtoupper}
+
+\func{char}{wxToUpper}{\param{char }{ch}}
+
+Converts the character to upper case. This is implemented as a macro for efficiency.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxVsnprintf}\label{wxvsnprintf}
-\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argptr}}
+\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argPtr}}
-The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list}
+The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list }
argument instead of arbitrary number of parameters.
\wxheading{See also}
parameter, or (in MS Windows or Motif) the wrong window frame may be brought to
the front when the dialog box is popped up.
+\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
+
+\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
+
+Changes the cursor to the given cursor for all windows in the application.
+Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
+to its previous state. These two calls can be nested, and a counter
+ensures that only the outer calls take effect.
+
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxBell}\label{wxbell}
+
+\func{void}{wxBell}{\void}
+
+Ring the system bell.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxCreateFileTipProvider}\label{wxcreatefiletipprovider}
\func{wxTipProvider *}{wxCreateFileTipProvider}{\param{const wxString\& }{filename},
<wx/tipdlg.h>
+\membersection{::wxDirSelector}\label{wxdirselector}
+
+\func{wxString}{wxDirSelector}{\param{const wxString\& }{message = wxDirSelectorPromptStr},\\
+ \param{const wxString\& }{default\_path = ""},\\
+ \param{long }{style = 0}, \param{const wxPoint\& }{pos = wxDefaultPosition},\\
+ \param{wxWindow *}{parent = NULL}}
+
+Pops up a directory selector dialog. The arguments have the same meaning as
+those of wxDirDialog::wxDirDialog(). The message is displayed at the top,
+and the default\_path, if specified, is set as the initial selection.
+
+The application must check for an empty return value (if the user pressed
+Cancel). For example:
+
+\begin{verbatim}
+const wxString& dir = wxDirSelector("Choose a folder");
+if ( !dir.empty() )
+{
+ ...
+}
+\end{verbatim}
+
+\wxheading{Include files}
+
+<wx/dirdlg.h>
+
\membersection{::wxFileSelector}\label{wxfileselector}
\func{wxString}{wxFileSelector}{\param{const wxString\& }{message}, \param{const wxString\& }{default\_path = ""},\\
<wx/filedlg.h>
+\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
+
+\func{void}{wxEndBusyCursor}{\void}
+
+Changes the cursor back to the original cursor, for all windows in the application.
+Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
+
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxGetColourFromUser}\label{wxgetcolourfromuser}
\func{wxColour}{wxGetColourFromUser}{\param{wxWindow *}{parent}, \param{const wxColour\& }{colInit}}
<wx/colordlg.h>
+\membersection{::wxGetFontFromUser}\label{wxgetfontfromuser}
+
+\func{wxFont}{wxGetFontFromUser}{\param{wxWindow *}{parent}, \param{const wxFont\& }{fontInit}}
+
+Shows the font selection dialog and returns the font selected by user or
+invalid font (use \helpref{wxFont::Ok}{wxfontok} to test whether a font
+is valid) if the dialog was cancelled.
+
+\wxheading{Parameters}
+
+\docparam{parent}{The parent window for the font selection dialog}
+
+\docparam{fontInit}{If given, this will be the font initially selected in the dialog.}
+
+\wxheading{Include files}
+
+<wx/fontdlg.h>
+
+
\membersection{::wxGetMultipleChoices}\label{wxgetmultiplechoices}
\func{size\_t}{wxGetMultipleChoices}{\\
and {\tt choices}, and the client data array must have the
same length as the choices array.}
+\membersection{::wxIsBusy}\label{wxisbusy}
+
+\func{bool}{wxIsBusy}{\void}
+
+Returns TRUE if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
+\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
+
+See also \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxMessageBox}\label{wxmessagebox}
\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK \pipe wxCENTRE},\\
<wx/gdicmn.h>
-\membersection{::wxClientDisplayRect}
+\membersection{wxBITMAP}\label{wxbitmapmacro}
+
+\func{}{wxBITMAP}{bitmapName}
+
+This macro loads a bitmap from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating bitmaps.
+
+\wxheading{See also}
+
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxICON}{wxiconmacro}
+
+\wxheading{Include files}
+
+<wx/gdicmn.h>
+
+\membersection{::wxClientDisplayRect}\label{wxclientdisplayrect}
\func{void}{wxClientDisplayRect}{\param{int *}{x}, \param{int *}{y},
\param{int *}{width}, \param{int *}{height}}
are currently defaulting to the whole display until a way is found to
provide this info for all window managers, etc.
-\membersection{::wxColourDisplay}
+\membersection{::wxColourDisplay}\label{wxcolourdisplay}
\func{bool}{wxColourDisplay}{\void}
Returns TRUE if the display is colour, FALSE otherwise.
-\membersection{::wxDisplayDepth}
+\membersection{::wxDisplayDepth}\label{wxdisplaydepth}
\func{int}{wxDisplayDepth}{\void}
Returns the depth of the display (a value of 1 denotes a monochrome display).
-\membersection{::wxDisplaySize}
+\membersection{::wxDisplaySize}\label{wxdisplaysize}
\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
Returns the display size in pixels.
-\membersection{::wxDisplaySizeMM}
+\membersection{::wxDisplaySizeMM}\label{wxdisplaysizemm}
\func{void}{wxDisplaySizeMM}{\param{int *}{width}, \param{int *}{height}}
Returns the display size in millimeters.
+\membersection{::wxDROP\_ICON}\label{wxdropicon}
+
+\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
+
+This macro creates either a cursor (MSW) or an icon (elsewhere) with the given
+name. Under MSW, the cursor is loaded from the resource file and the icon is
+loaded from XPM file under other platforms.
+
+This macro should be used with
+\helpref{wxDropSource constructor}{wxdropsourcewxdropsource}.
+
+\wxheading{Include files}
+
+<wx/dnd.h>
+
+\membersection{wxICON}\label{wxiconmacro}
+
+\func{}{wxICON}{iconName}
+
+This macro loads an icon from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating icons.
+
+\wxheading{See also}
+
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxBITMAP}{wxbitmapmacro}
+
+\wxheading{Include files}
+
+<wx/gdicmn.h>
+
\membersection{::wxMakeMetafilePlaceable}\label{wxmakemetafileplaceable}
\func{bool}{wxMakeMetafilePlaceable}{\param{const wxString\& }{filename}, \param{int }{minX}, \param{int }{minY},
<wx/dcps.h>
-\membersection{::wxGetPrinterCommand}
+\membersection{::wxGetPrinterCommand}\label{wxgetprintercommand}
\func{wxString}{wxGetPrinterCommand}{\void}
Gets the printer command used to print a file. The default is {\tt lpr}.
-\membersection{::wxGetPrinterFile}
+\membersection{::wxGetPrinterFile}\label{wxgetprinterfile}
\func{wxString}{wxGetPrinterFile}{\void}
Gets the PostScript output filename.
-\membersection{::wxGetPrinterMode}
+\membersection{::wxGetPrinterMode}\label{wxgetprintermode}
\func{int}{wxGetPrinterMode}{\void}
Gets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
-\membersection{::wxGetPrinterOptions}
+\membersection{::wxGetPrinterOptions}\label{wxgetprinteroptions}
\func{wxString}{wxGetPrinterOptions}{\void}
Gets the additional options for the print command (e.g. specific printer). The default is nothing.
-\membersection{::wxGetPrinterOrientation}
+\membersection{::wxGetPrinterOrientation}\label{wxgetprinterorientation}
\func{int}{wxGetPrinterOrientation}{\void}
Gets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\membersection{::wxGetPrinterPreviewCommand}
+\membersection{::wxGetPrinterPreviewCommand}\label{wxgetprinterpreviewcommand}
\func{wxString}{wxGetPrinterPreviewCommand}{\void}
Gets the command used to view a PostScript file. The default depends on the platform.
-\membersection{::wxGetPrinterScaling}
+\membersection{::wxGetPrinterScaling}\label{wxgetprinterscaling}
\func{void}{wxGetPrinterScaling}{\param{float *}{x}, \param{float *}{y}}
Gets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\membersection{::wxGetPrinterTranslation}
+\membersection{::wxGetPrinterTranslation}\label{wxgetprintertranslation}
\func{void}{wxGetPrinterTranslation}{\param{float *}{x}, \param{float *}{y}}
Gets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
-\membersection{::wxSetPrinterCommand}
+\membersection{::wxSetPrinterCommand}\label{wxsetprintercommand}
\func{void}{wxSetPrinterCommand}{\param{const wxString\& }{command}}
Sets the printer command used to print a file. The default is {\tt lpr}.
-\membersection{::wxSetPrinterFile}
+\membersection{::wxSetPrinterFile}\label{wxsetprinterfile}
\func{void}{wxSetPrinterFile}{\param{const wxString\& }{filename}}
Sets the PostScript output filename.
-\membersection{::wxSetPrinterMode}
+\membersection{::wxSetPrinterMode}\label{wxsetprintermode}
\func{void}{wxSetPrinterMode}{\param{int }{mode}}
Sets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
-\membersection{::wxSetPrinterOptions}
+\membersection{::wxSetPrinterOptions}\label{wxsetprinteroptions}
\func{void}{wxSetPrinterOptions}{\param{const wxString\& }{options}}
Sets the additional options for the print command (e.g. specific printer). The default is nothing.
-\membersection{::wxSetPrinterOrientation}
+\membersection{::wxSetPrinterOrientation}\label{wxsetprinterorientation}
\func{void}{wxSetPrinterOrientation}{\param{int}{ orientation}}
Sets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\membersection{::wxSetPrinterPreviewCommand}
+\membersection{::wxSetPrinterPreviewCommand}\label{wxsetprinterpreviewcommand}
\func{void}{wxSetPrinterPreviewCommand}{\param{const wxString\& }{command}}
Sets the command used to view a PostScript file. The default depends on the platform.
-\membersection{::wxSetPrinterScaling}
+\membersection{::wxSetPrinterScaling}\label{wxsetprinterscaling}
\func{void}{wxSetPrinterScaling}{\param{float }{x}, \param{float }{y}}
Sets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\membersection{::wxSetPrinterTranslation}
+\membersection{::wxSetPrinterTranslation}\label{wxsetprintertranslation}
\func{void}{wxSetPrinterTranslation}{\param{float }{x}, \param{float }{y}}
<wx/clipbrd.h>
-\membersection{::wxClipboardOpen}
+\membersection{::wxClipboardOpen}\label{functionwxclipboardopen}
\func{bool}{wxClipboardOpen}{\void}
Returns TRUE if this application has already opened the clipboard.
-\membersection{::wxCloseClipboard}
+\membersection{::wxCloseClipboard}\label{wxcloseclipboard}
\func{bool}{wxCloseClipboard}{\void}
Closes the clipboard to allow other applications to use it.
-\membersection{::wxEmptyClipboard}
+\membersection{::wxEmptyClipboard}\label{wxemptyclipboard}
\func{bool}{wxEmptyClipboard}{\void}
Empties the clipboard.
-\membersection{::wxEnumClipboardFormats}
+\membersection{::wxEnumClipboardFormats}\label{wxenumclipboardformats}
\func{int}{wxEnumClipboardFormats}{\param{int}{dataFormat}}
Before it enumerates the formats function, an application must open the clipboard by using the
wxOpenClipboard function.
-\membersection{::wxGetClipboardData}
+\membersection{::wxGetClipboardData}\label{wxgetclipboarddata}
\func{wxObject *}{wxGetClipboardData}{\param{int}{dataFormat}}
The clipboard must have previously been opened for this call to succeed.
-\membersection{::wxGetClipboardFormatName}
+\membersection{::wxGetClipboardFormatName}\label{wxgetclipboardformatname}
\func{bool}{wxGetClipboardFormatName}{\param{int}{dataFormat}, \param{const wxString\& }{formatName}, \param{int}{maxCount}}
Gets the name of a registered clipboard format, and puts it into the buffer {\it formatName} which is of maximum
length {\it maxCount}. {\it dataFormat} must not specify a predefined clipboard format.
-\membersection{::wxIsClipboardFormatAvailable}
+\membersection{::wxIsClipboardFormatAvailable}\label{wxisclipboardformatavailable}
\func{bool}{wxIsClipboardFormatAvailable}{\param{int}{dataFormat}}
Returns TRUE if the given data format is available on the clipboard.
-\membersection{::wxOpenClipboard}
+\membersection{::wxOpenClipboard}\label{wxopenclipboard}
\func{bool}{wxOpenClipboard}{\void}
Opens the clipboard for passing data to it or getting data from it.
-\membersection{::wxRegisterClipboardFormat}
+\membersection{::wxRegisterClipboardFormat}\label{wxregisterclipboardformat}
\func{int}{wxRegisterClipboardFormat}{\param{const wxString\& }{formatName}}
Registers the clipboard data format name and returns an identifier.
-\membersection{::wxSetClipboardData}
+\membersection{::wxSetClipboardData}\label{wxsetclipboarddata}
\func{bool}{wxSetClipboardData}{\param{int}{dataFormat}, \param{wxObject *}{data}, \param{int}{width}, \param{int}{height}}
\section{Miscellaneous functions}\label{miscellany}
-\membersection{::wxDROP\_ICON}\label{wxdropicon}
-
-\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
-
-This macro creates either a cursor (MSW) or an icon (elsewhere) with the given
-name. Under MSW, the cursor is loaded from the resource file and the icon is
-loaded from XPM file under other platforms.
-
-This macro should be used with
-\helpref{wxDropSource constructor}{wxdropsourcewxdropsource}.
-
-\wxheading{Include files}
-
-<wx/dnd.h>
-
-\membersection{::wxNewId}
+\membersection{::wxNewId}\label{wxnewid}
\func{long}{wxNewId}{\void}
<wx/utils.h>
-\membersection{::wxRegisterId}
+\membersection{::wxRegisterId}\label{wxregisterid}
\func{void}{wxRegisterId}{\param{long}{ id}}
<wx/utils.h>
-\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
+\membersection{::wxDDECleanUp}\label{wxddecleanup}
-\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
-
-Changes the cursor to the given cursor for all windows in the application.
-Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
-to its previous state. These two calls can be nested, and a counter
-ensures that only the outer calls take effect.
-
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxBell}
-
-\func{void}{wxBell}{\void}
-
-Ring the system bell.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
-
-\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
-
-Creates and returns an object of the given class, if the class has been
-registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
-
-\membersection{::wxDDECleanUp}\label{wxddecleanup}
-
-\func{void}{wxDDECleanUp}{\void}
+\func{void}{wxDDECleanUp}{\void}
Called when wxWindows exits, to clean up the DDE system. This no longer needs to be
called by the application.
<wx/dde.h>
-\membersection{::wxDebugMsg}\label{wxdebugmsg}
-
-\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
-
-{\bf This function is deprecated, use \helpref{wxLogDebug}{wxlogdebug} instead!}
-
-Display a debugging message; under Windows, this will appear on the
-debugger command window, and under Unix, it will be written to standard
-error.
-
-The syntax is identical to {\bf printf}: pass a format string and a
-variable list of arguments.
-
-{\bf Tip:} under Windows, if your application crashes before the
-message appears in the debugging window, put a wxYield call after
-each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
-(at least for Watcom C++): preformat your messages and use OutputDebugString
-instead.
-
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxDisplaySize}
-
-\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
-
-Gets the physical size of the display in pixels.
-
-\wxheading{Include files}
-
-<wx/gdicmn.h>
-
\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
\func{void}{wxEnableTopLevelWindow}{\param{bool}{ enable = TRUE}}
<wx/utils.h>
-\membersection{::wxEntry}\label{wxentry}
-
-This initializes wxWindows in a platform-dependent way. Use this if you
-are not using the default wxWindows entry code (e.g. main or WinMain). For example,
-you can initialize wxWindows from an Microsoft Foundation Classes application using
-this function.
-
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = TRUE}}
-
-wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is FALSE, the
-function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
-message loop will be entered.
-
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
-
-wxWindows initialization under Windows (for applications constructed as a DLL).
-
-\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
-
-wxWindows initialization under Unix.
-
-\wxheading{Remarks}
-
-To clean up wxWindows, call wxApp::OnExit followed by the static function
-wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
-
-\begin{verbatim}
-int CTheApp::ExitInstance()
-{
- // OnExit isn't called by CleanUp so must be called explicitly.
- wxTheApp->OnExit();
- wxApp::CleanUp();
-
- return CWinApp::ExitInstance();
-}
-\end{verbatim}
-
-\wxheading{Include files}
-
-<wx/app.h>
-
-\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
-
-\func{void}{wxEndBusyCursor}{\void}
-
-Changes the cursor back to the original cursor, for all windows in the application.
-Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
-
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxError}\label{wxerror}
-
-\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
-
-Displays {\it msg} and continues. This writes to standard error under
-Unix, and pops up a message box under Windows. Used for internal
-wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxExecute}\label{wxexecute}
-
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
-
-\func{long}{wxExecute}{\param{char **}{argv}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
-
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}}
-
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}}
-
-Executes another program in Unix or Windows.
-
-The first form takes a command string, such as {\tt "emacs file.txt"}.
-
-The second form takes an array of values: a command, any number of
-arguments, terminated by NULL.
-
-The semantics of the third and fourth versions is different from the first two
-and is described in more details below.
-
-If {\it sync} is FALSE (the default), flow of control immediately returns.
-If TRUE, the current application waits until the other program has terminated.
-
-In the case of synchronous execution, the return value is the exit code of
-the process (which terminates by the moment the function returns) and will be
-$-1$ if the process couldn't be started and typically 0 if the process
-terminated successfully. Also, while waiting for the process to
-terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
-should ensure that this can cause no recursion, in the simplest case by
-calling \helpref{wxEnableTopLevelWindows(FALSE)}{wxenabletoplevelwindows}.
-
-For asynchronous execution, however, the return value is the process id and
-zero value indicates that the command could not be executed. As an added
-complication, the return value of $-1$ in this case indicattes that we didn't
-launch a new process, but connected to the running one (this can only happen in
-case of using DDE under Windows for command execution). In particular, in this,
-and only this, case the calling code will not get the notification about
-process termination.
-
-If callback isn't NULL and if execution is asynchronous (note that callback
-parameter can not be non-NULL for synchronous execution),
-\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
-the process finishes.
-
-Finally, you may use the third overloaded version of this function to execute
-a process (always synchronously) and capture its output in the array
-{\it output}. The fourth version adds the possibility to additionally capture
-the messages from standard error output in the {\it errors} array.
-
-See also \helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess},
-\helpref{Exec sample}{sampleexec}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxExit}\label{wxexit}
-
-\func{void}{wxExit}{\void}
-
-Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
-Should only be used in an emergency: normally the top-level frame
-should be deleted (after deleting all other frames) to terminate the
-application. See \helpref{wxWindow::OnCloseWindow}{wxwindowonclosewindow} and \helpref{wxApp}{wxapp}.
-
-\wxheading{Include files}
-
-<wx/app.h>
-
-\membersection{::wxFatalError}\label{wxfatalerror}
-
-\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
-
-Displays {\it msg} and exits. This writes to standard error under Unix,
-and pops up a message box under Windows. Used for fatal internal
-wxWindows errors. See also \helpref{wxError}{wxerror}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxFindMenuItemId}
+\membersection{::wxFindMenuItemId}\label{wxfindmenuitemid}
\func{int}{wxFindMenuItemId}{\param{wxFrame *}{frame}, \param{const wxString\& }{menuString}, \param{const wxString\& }{itemString}}
\func{wxString}{wxGetDisplayName}{\void}
-Under X only, returns the current display name. See also \helpref{wxSetDisplayName}{wxsetdisplayname}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetHomeDir}\label{wxgethomedir}
-
-\func{wxString}{wxGetHomeDir}{\void}
-
-Return the (current) user's home directory.
-
-\wxheading{See also}
-
-\helpref{wxGetUserHome}{wxgetuserhome}
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
-
-\func{long}{wxGetFreeMemory}{\void}
-
-Returns the amount of free memory in bytes under environments which
-support it, and -1 if not supported. Currently, it is supported only
-under Windows, Linux and Solaris.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetMousePosition}\label{wxgetmouseposition}
-
-\func{wxPoint}{wxGetMousePosition}{\void}
-
-Returns the mouse position in screen coordinates.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetOsDescription}\label{wxgetosdescription}
-
-\func{wxString}{wxGetOsDescription}{\void}
-
-Returns the string containing the description of the current platform in a
-user-readable form. For example, this function may return strings like
-{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
-
-\wxheading{See also}
-
-\helpref{::wxGetOsVersion}{wxgetosversion}
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetOsVersion}\label{wxgetosversion}
-
-\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
-
-Gets operating system version information.
-
-\begin{twocollist}\itemsep=0pt
-\twocolitemruled{Platform}{Return types}
-\twocolitem{Macintosh}{Return value is wxMACINTOSH.}
-\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
-\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
-\twocolitem{OS/2}{Return value is wxOS2\_PM.}
-\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}}
-\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
-\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
-\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
-\end{twocollist}
-
-\wxheading{See also}
+Under X only, returns the current display name. See also \helpref{wxSetDisplayName}{wxsetdisplayname}.
-\helpref{::wxGetOsDescription}{wxgetosdescription}
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetMousePosition}\label{wxgetmouseposition}
+
+\func{wxPoint}{wxGetMousePosition}{\void}
+
+Returns the mouse position in screen coordinates.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetUserId}
-
-\func{bool}{wxGetUserId}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
-
-Copies the user's login identity (such as ``jacs'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``user''.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetUserHome}\label{wxgetuserhome}
-
-\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
-
-Returns the home directory for the given user. If the username is empty
-(default value), this function behaves like
-\helpref{wxGetHomeDir}{wxgethomedir}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetUserName}
-
-\func{bool}{wxGetUserName}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
-
-Copies the user's name (such as ``Julian Smart'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``unknown''.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
-
-\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = TRUE}}
-
-If {\it doIt} is TRUE, the fatal exceptions (also known as general protection
-faults under Windows or segmentation violations in the Unix world) will be
-caught and passed to \helpref{wxApp::OnFatalException}{wxapponfatalexception}.
-By default, i.e. before this function is called, they will be handled in the
-normal way which usually just means that the application will be terminated.
-Calling wxHandleFatalExceptions() with {\it doIt} equal to FALSE will restore
-this default behaviour.
-
-\membersection{::wxKill}\label{wxkill}
-
-\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig}}
-
-Under Unix (the only supported platform), equivalent to the Unix kill function.
-Returns 0 on success, -1 on failure.
-
-Tip: sending a signal of 0 to a process returns -1 if the process does not exist.
-It does not raise a signal in the receiving process.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
-
-\func{void}{wxInitAllImageHandlers}{\void}
-
-Initializes all available image handlers. For a list of available handlers,
-see \helpref{wxImage}{wximage}.
-
-\wxheading{See also}
-
-\helpref{wxImage}{wximage}, \helpref{wxImageHandler}{wximagehandler}
-
-\membersection{::wxIsBusy}\label{wxisbusy}
-
-\func{bool}{wxIsBusy}{\void}
+\membersection{::wxGetTopLevelParent}\label{wxgettoplevelparent}
-Returns TRUE if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
-\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
+\func{wxWindow *}{wxGetTopLevelParent}{\param{wxWindow }{*win}}
-See also \helpref{wxBusyCursor}{wxbusycursor}.
+Returns the first top level parent of the given window, or in other words, the
+frame or dialog containing it, or {\tt NULL}.
\wxheading{Include files}
-<wx/utils.h>
+<wx/window.h>
\membersection{::wxLoadUserResource}\label{wxloaduserresource}
<wx/utils.h>
-\membersection{::wxNow}\label{wxnow}
-
-\func{wxString}{wxNow}{\void}
-
-Returns a string representing the current date and time.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{::wxPostDelete}\label{wxpostdelete}
\func{void}{wxPostDelete}{\param{wxObject *}{object}}
\func{void}{wxPostEvent}{\param{wxEvtHandler *}{dest}, \param{wxEvent\& }{event}}
-This function posts the event to the specified {\it dest} object. The
-difference between sending an event and posting it is that in the first case
-the event is processed before the function returns (in wxWindows, event sending
-is done with \helpref{ProcessEvent}{wxevthandlerprocessevent} function), but in
-the second, the function returns immediately and the event will be processed
-sometime later - usually during the next even loop iteration.
-
-Note that a copy of the {\it event} is made by the function, so the original
-copy can be deleted as soon as function returns. This function can also be used
-to send events between different threads safely. As this function makes a
-copy of the event, the event needs to have a fully implemented Clone() method,
-which may not be the case for all event in wxWindows.
-
-See also \helpref{AddPendingEvent}{wxevthandleraddpendingevent} (which this function
-uses internally).
+In a GUI application, this function posts {\it event} to the specified {\it dest}
+object using \helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
+Otherwise, it dispatches {\it event} immediately using
+\helpref{wxEvtHandler::ProcessEvent}{wxevthandlerprocessevent}.
+See the respective documentation for details (and caveats).
\wxheading{Include files}
<wx/app.h>
-\membersection{::wxSafeYield}\label{wxsafeyield}
-
-\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}}
-
-This function is similar to wxYield, except that it disables the user input to
-all program windows before calling wxYield and re-enables it again
-afterwards. If {\it win} is not NULL, this window will remain enabled,
-allowing the implementation of some limited user interaction.
-
-Returns the result of the call to \helpref{::wxYield}{wxyield}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{::wxSetDisplayName}\label{wxsetdisplayname}
\func{void}{wxSetDisplayName}{\param{const wxString\& }{displayName}}
<wx/utils.h>
-\membersection{::wxShell}\label{wxshell}
-
-\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
-
-Executes a command in an interactive shell window. If no command is
-specified, then just the shell is spawned.
-
-See also \helpref{wxExecute}{wxexecute}, \helpref{Exec sample}{sampleexec}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxSleep}\label{wxsleep}
-
-\func{void}{wxSleep}{\param{int}{ secs}}
-
-Sleeps for the specified number of seconds.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxStripMenuCodes}
+\membersection{::wxStripMenuCodes}\label{wxstripmenucodes}
\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{in}}
-\func{void}{wxStripMenuCodes}{\param{char* }{in}, \param{char* }{out}}
+\func{void}{wxStripMenuCodes}{\param{char *}{in}, \param{char *}{out}}
+
+This function is obsolete, please use
+\helpref{wxMenuItem::GetLabelFromText}{wxmenuitemgetlabelfromtext} instead.
Strips any menu codes from {\it in} and places the result
in {\it out} (or returns the new string, in the first form).
<wx/utils.h>
-\membersection{::wxToLower}\label{wxtolower}
-
-\func{char}{wxToLower}{\param{char }{ch}}
-
-Converts the character to lower case. This is implemented as a macro for efficiency.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxToUpper}\label{wxtoupper}
-
-\func{char}{wxToUpper}{\param{char }{ch}}
-
-Converts the character to upper case. This is implemented as a macro for efficiency.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxTrace}\label{wxtrace}
-
-\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
-
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\membersection{::wxTraceLevel}\label{wxtracelevel}
-
-\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
-
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
-
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\membersection{::wxTrap}\label{wxtrap}
-
-\func{void}{wxTrap}{\void}
-
-In debug mode (when {\tt \_\_WXDEBUG\_\_} is defined) this function generates a
-debugger exception meaning that the control is passed to the debugger if one is
-attached to the process. Otherwise the program just terminates abnormally.
-
-In release mode this function does nothing.
-
-\wxheading{Include files}
-
-<wx/debug.h>
-
-\membersection{::wxUsleep}\label{wxusleep}
-
-\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
-
-Sleeps for the specified number of milliseconds. Notice that usage of this
-function is encouraged instead of calling usleep(3) directly because the
-standard usleep() function is not MT safe.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{::wxWriteResource}\label{wxwriteresource}
\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
<wx/utils.h>
-\membersection{::wxYield}\label{wxyield}
-
-\func{bool}{wxYield}{\void}
-
-Yields control to pending messages in the windowing system. This can be useful, for example, when a
-time-consuming process writes to a text window. Without an occasional
-yield, the text window will not be updated properly, and on systems with
-cooperative multitasking, such as Windows 3.1 other processes will not respond.
-
-Caution should be exercised, however, since yielding may allow the
-user to perform actions which are not compatible with the current task.
-Disabling menu items or whole menus during processing can avoid unwanted
-reentrance of code: see \helpref{::wxSafeYield}{wxsafeyield} for a better
-function.
-
-Note that wxYield will not flush the message logs. This is intentional as
-calling wxYield is usually done to quickly update the screen and popping up a
-message box dialog may be undesirable. If you do wish to flush the log
-messages immediately (otherwise it will be done during the next idle loop
-iteration), call \helpref{wxLog::FlushActive}{wxlogflushactive}.
-
-\wxheading{Include files}
-
-<wx/app.h> or <wx/utils.h>
-
-\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
-
-\func{void}{wxWakeUpIdle}{\void}
-
-This functions wakes up the (internal and platform dependent) idle system, i.e. it
-will force the system to send an idle event even if the system currently {\it is}
- idle and thus would not send any idle event until after some other event would get
-sent. This is also useful for sending events between two threads and is used by
-the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
-\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
-
-\wxheading{Include files}
-
-<wx/app.h>
-
-\section{Macros}\label{macros}
+\section{Byte order macros}\label{byteordermacros}
-These macros are defined in wxWindows.
+The endian-ness issues (that is the difference between big-endian and
+little-endian architectures) are important for the portable programs working
+with the external binary data (for example, data files or data coming from
+network) which is usually in some fixed, platform-independent format. The
+macros are helpful for transforming the data to the correct format.
\membersection{wxINTXX\_SWAP\_ALWAYS}\label{intswapalways}
\func{wxUint16}{wxUINT16\_SWAP\_ALWAYS}{\param{wxUint16 }{value}}
-This macro will swap the bytes of the {\it value} variable from little
-endian to big endian or vice versa.
+These macros will swap the bytes of the {\it value} variable from little
+endian to big endian or vice versa unconditionally, i.e. independently of the
+current platform.
\membersection{wxINTXX\_SWAP\_ON\_BE}\label{intswaponbe}
been compiled on a little-endian architecture, the value will be unchanged.
Use these macros to read data from and write data to a file that stores
-data in little endian (Intel i386) format.
+data in little-endian (for example Intel i386) format.
\membersection{wxINTXX\_SWAP\_ON\_LE}\label{intswaponle}
been compiled on a big-endian architecture, the value will be unchanged.
Use these macros to read data from and write data to a file that stores
-data in big endian format.
+data in big-endian format.
+
+\section{RTTI functions}\label{rttimacros}
+
+wxWindows uses its own RTTI ("run-time type identification") system which
+predates the current standard C++ RTTI and so is kept for backwards
+compatribility reasons but also because it allows some things which the
+standard RTTI doesn't directly support (such as creating a class from its
+name).
+
+The standard C++ RTTI can be used in the user code without any problems and in
+general you shouldn't need to use the functions and the macros in this section
+unless you are thinking of modifying or adding any wxWindows classes.
+
+\wxheading{See also}
+
+\helpref{RTTI overview}{runtimeclassoverview}
\membersection{CLASSINFO}\label{classinfo}
<wx/object.h>
-\membersection{DECLARE\_ABSTRACT\_CLASS}
+\membersection{DECLARE\_ABSTRACT\_CLASS}\label{declareabstractclass}
\func{}{DECLARE\_ABSTRACT\_CLASS}{className}
<wx/app.h>
-\membersection{DECLARE\_CLASS}
+\membersection{DECLARE\_CLASS}\label{declareclass}
\func{}{DECLARE\_CLASS}{className}
<wx/object.h>
-\membersection{DECLARE\_DYNAMIC\_CLASS}
+\membersection{DECLARE\_DYNAMIC\_CLASS}\label{declaredynamicclass}
\func{}{DECLARE\_DYNAMIC\_CLASS}{className}
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS}
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS}\label{implementabstractclass}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}\label{implementabstractclass2}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/app.h>
-\membersection{IMPLEMENT\_CLASS}
+\membersection{IMPLEMENT\_CLASS}\label{implementclass}
\func{}{IMPLEMENT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_CLASS2}
+\membersection{IMPLEMENT\_CLASS2}\label{implementclass2}
\func{}{IMPLEMENT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS}
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS}\label{implementdynamicclass}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}\label{implementdynamicclass2}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS2}{className, baseClassName1, baseClassName2}
Used in a C++ implementation file to complete the declaration of
-a class that has run-time type information, and whose instances
-can be created dynamically. Use this for classes derived from two
-base classes.
-
-\wxheading{Include files}
-
-<wx/object.h>
-
-\membersection{wxBITMAP}\label{wxbitmapmacro}
-
-\func{}{wxBITMAP}{bitmapName}
-
-This macro loads a bitmap from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt \#ifdef}s when creating bitmaps.
-
-\wxheading{See also}
-
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxICON}{wxiconmacro}
+a class that has run-time type information, and whose instances
+can be created dynamically. Use this for classes derived from two
+base classes.
\wxheading{Include files}
-<wx/gdicmn.h>
+<wx/object.h>
\membersection{wxConstCast}\label{wxconstcast}
-\func{}{wxConstCast}{ptr, classname}
+\func{classname *}{wxConstCast}{ptr, classname}
This macro expands into {\tt const\_cast<classname *>(ptr)} if the compiler
supports {\it const\_cast} or into an old, C-style cast, otherwise.
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxStaticCast}{wxstaticcast}
+\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
+
+\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
+
+Creates and returns an object of the given class, if the class has been
+registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
+
\membersection{WXDEBUG\_NEW}\label{debugnew}
\func{}{WXDEBUG\_NEW}{arg}
\membersection{wxDynamicCast}\label{wxdynamiccast}
-\func{}{wxDynamicCast}{ptr, classname}
+\func{classname *}{wxDynamicCast}{ptr, classname}
This macro returns the pointer {\it ptr} cast to the type {\it classname *} if
-the pointer is of this type (the check is done during the run-time) or NULL
-otherwise. Usage of this macro is preferred over obsoleted wxObject::IsKindOf()
-function.
+the pointer is of this type (the check is done during the run-time) or
+{\tt NULL} otherwise. Usage of this macro is preferred over obsoleted
+wxObject::IsKindOf() function.
-The {\it ptr} argument may be NULL, in which case NULL will be returned.
+The {\it ptr} argument may be {\tt NULL}, in which case {\tt NULL} will be
+returned.
Example:
\wxheading{See also}
\helpref{RTTI overview}{runtimeclassoverview}\\
+\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
\helpref{wxConstCast}{wxconstcast}\\
\helpref{wxStatiicCast}{wxstaticcast}
-\membersection{wxICON}\label{wxiconmacro}
+\membersection{wxDynamicCastThis}\label{wxdynamiccastthis}
-\func{}{wxICON}{iconName}
+\func{classname *}{wxDynamicCastThis}{classname}
-This macro loads an icon from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt \#ifdef}s when creating icons.
+This macro is equivalent to {\tt wxDynamicCast(this, classname)} but the
+latter provokes spurious compilation warnings from some compilers (because it
+tests whether {\tt this} pointer is non {\tt NULL} which is always true), so
+this macro should be used to avoid them.
\wxheading{See also}
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxBITMAP}{wxbitmapmacro}
-
-\wxheading{Include files}
-
-<wx/gdicmn.h>
+\helpref{wxDynamicCast}{wxdynamiccast}
\membersection{wxStaticCast}\label{wxstaticcast}
-\func{}{wxStaticCast}{ptr, classname}
+\func{classname *}{wxStaticCast}{ptr, classname}
This macro checks that the cast is valid in debug mode (an assert failure will
result if {\tt wxDynamicCast(ptr, classname) == NULL}) and then returns the
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxConstCast}{wxconstcast}
-\membersection{WXTRACE}\label{trace}
-
-\wxheading{Include files}
-
-<wx/object.h>
-
-\func{}{WXTRACE}{formatString, ...}
-
-Calls wxTrace with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-
-This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\membersection{WXTRACELEVEL}\label{tracelevel}
-
-\func{}{WXTRACELEVEL}{level, formatString, ...}
-
-Calls wxTraceLevel with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
-
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
+\section{Resource functions}\label{resourcefuncs}
-\section{wxWindows resource functions}\label{resourcefuncs}
-
-\overview{wxWindows resource system}{resourceformats}
+\overview{Resource functions}{resourceformats}
This section details functions for manipulating wxWindows (.WXR) resource
files and loading user interface elements from resources.
\tt{#}defining a name to an integer). Unlikely to be used by an application except
perhaps for implementing resource functionality for interpreted languages.
-\membersection{::wxResourceClear}
+\membersection{::wxResourceClear}\label{wxresourceclear}
\func{void}{wxResourceClear}{\void}
Clears the wxWindows resource table.
-\membersection{::wxResourceCreateBitmap}
+\membersection{::wxResourceCreateBitmap}\label{wxresourcecreatebitmap}
\func{wxBitmap *}{wxResourceCreateBitmap}{\param{const wxString\& }{resource}}
wxBitmap *bitmap = wxResourceCreateBitmap("project_resource");
\end{verbatim}
-\membersection{::wxResourceCreateIcon}
+\membersection{::wxResourceCreateIcon}\label{wxresourcecreateicon}
\func{wxIcon *}{wxResourceCreateIcon}{\param{const wxString\& }{resource}}
wxIcon *icon = wxResourceCreateIcon("project_resource");
\end{verbatim}
-\membersection{::wxResourceCreateMenuBar}
+\membersection{::wxResourceCreateMenuBar}\label{wxresourcecreatemenubar}
\func{wxMenuBar *}{wxResourceCreateMenuBar}{\param{const wxString\& }{resource}}
\end{verbatim}
-\membersection{::wxResourceGetIdentifier}
+\membersection{::wxResourceGetIdentifier}\label{wxresourcegetidentifier}
\func{int}{wxResourceGetIdentifier}{\param{const wxString\& }{name}}
Each of the contained resources will declare a new C++ variable, and each
of these variables should be passed to wxResourceParseData.
-\membersection{::wxResourceParseFile}
+\membersection{::wxResourceParseFile}\label{wxresourceparsefile}
\func{bool}{wxResourceParseFile}{\param{const wxString\& }{filename}, \param{wxResourceTable *}{table = NULL}}
\membersection{::wxResourceParseString}\label{wxresourceparsestring}
-\func{bool}{wxResourceParseString}{\param{char*}{ s}, \param{wxResourceTable *}{table = NULL}}
+\func{bool}{wxResourceParseString}{\param{char *}{s}, \param{wxResourceTable *}{table = NULL}}
Parses a string containing one or more wxWindows resource objects. If
the resource objects are global static data that are included into the
\membersection{::wxResourceRegisterBitmapData}\label{registerbitmapdata}
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char* }{xbm\_data}, \param{int }{width},
+\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char *}{xbm\_data}, \param{int }{width},
\param{int }{height}, \param{wxResourceTable *}{table = NULL}}
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char** }{xpm\_data}}
+\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char **}{xpm\_data}}
Makes \tt{#}included XBM or XPM bitmap data known to the wxWindows resource system.
This is required if other resources will use the bitmap data, since otherwise there
is no connection between names used in resources, and the global bitmap data.
-\membersection{::wxResourceRegisterIconData}
+\membersection{::wxResourceRegisterIconData}\label{wxresourceregistericondata}
Another name for \helpref{wxResourceRegisterBitmapData}{registerbitmapdata}.
<wx/log.h>
+\membersection{::wxDebugMsg}\label{wxdebugmsg}
+
+\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
+
+{\bf This function is deprecated, use \helpref{wxLogDebug}{wxlogdebug} instead!}
+
+Display a debugging message; under Windows, this will appear on the
+debugger command window, and under Unix, it will be written to standard
+error.
+
+The syntax is identical to {\bf printf}: pass a format string and a
+variable list of arguments.
+
+{\bf Tip:} under Windows, if your application crashes before the
+message appears in the debugging window, put a wxYield call after
+each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
+(at least for Watcom C++): preformat your messages and use OutputDebugString
+instead.
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxError}\label{wxerror}
+
+\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
+
+This function is now obsolete, please use \helpref{wxLogError}{wxlogerror}
+instead.
+
+Displays {\it msg} and continues. This writes to standard error under
+Unix, and pops up a message box under Windows. Used for internal
+wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxFatalError}\label{wxfatalerror}
+
+\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
+
+This function is now obsolete, please use
+\helpref{wxLogFatalError}{wxlogfatalerror} instead.
+
+Displays {\it msg} and exits. This writes to standard error under Unix,
+and pops up a message box under Windows. Used for fatal internal
+wxWindows errors. See also \helpref{wxError}{wxerror}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxLogError}\label{wxlogerror}
-\func{void}{wxLogError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-The function to use for error messages, i.e. the messages that must be shown
+The functions to use for error messages, i.e. the messages that must be shown
to the user. The default processing is to pop up a message box to inform the
user about it.
\membersection{::wxLogFatalError}\label{wxlogfatalerror}
-\func{void}{wxLogFatalError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogFatalError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogFatalError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
Like \helpref{wxLogError}{wxlogerror}, but also
terminates the program with the exit code 3. Using {\it abort()} standard
\membersection{::wxLogWarning}\label{wxlogwarning}
-\func{void}{wxLogWarning}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogWarning}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogWarning}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
For warnings - they are also normally shown to the user, but don't interrupt
the program work.
\membersection{::wxLogMessage}\label{wxlogmessage}
-\func{void}{wxLogMessage}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogMessage}{\param{const char *}{formatString}, \param{...}{}}
-for all normal, informational messages. They also appear in a message box by
+\func{void}{wxVLogMessage}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+For all normal, informational messages. They also appear in a message box by
default (but it can be changed). Notice that the standard behaviour is to not
show informational messages if there are any errors later - the logic being
that the later error messages make the informational messages preceding them
\membersection{::wxLogVerbose}\label{wxlogverbose}
-\func{void}{wxLogVerbose}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogVerbose}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogVerbose}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
For verbose output. Normally, it is suppressed, but
might be activated if the user wishes to know more details about the program
\membersection{::wxLogStatus}\label{wxlogstatus}
-\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+\func{void}{wxLogStatus}{\param{const char *}{formatString}, \param{...}{}}
-\func{void}{wxLogStatus}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxVLogStatus}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-Messages logged by this function will appear in the statusbar of the {\it
+Messages logged by these functions will appear in the statusbar of the {\it
frame} or of the top level application window by default (i.e. when using
-the second version of the function).
+the second version of the functions).
If the target frame doesn't have a statusbar, the message will be lost.
\membersection{::wxLogSysError}\label{wxlogsyserror}
-\func{void}{wxLogSysError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogSysError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogSysError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
Mostly used by wxWindows itself, but might be handy for logging errors after
system call (API function) failure. It logs the specified message text as well
\membersection{::wxLogDebug}\label{wxlogdebug}
-\func{void}{wxLogDebug}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogDebug}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogDebug}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-The right function for debug output. It only does anything at all in the debug
-mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expands to
+The right functions for debug output. They only do something in debug
+mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expand to
nothing in release mode (otherwise).
\membersection{::wxLogTrace}\label{wxlogtrace}
-\func{void}{wxLogTrace}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogTrace}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogTrace}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
\func{void}{wxLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
\func{void}{wxLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
As {\bf wxLogDebug}, trace functions only do something in debug build and
expand to nothing in the release one. The reason for making
it a separate function from it is that usually there are a lot of trace
\helpref{wxSysErrorCode}{wxsyserrorcode},
\helpref{wxLogSysError}{wxlogsyserror}
+\membersection{WXTRACE}\label{trace}
+
+\wxheading{Include files}
+
+<wx/object.h>
+
+\func{}{WXTRACE}{formatString, ...}
+
+Calls wxTrace with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+\membersection{WXTRACELEVEL}\label{tracelevel}
+
+\func{}{WXTRACELEVEL}{level, formatString, ...}
+
+Calls wxTraceLevel with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+\membersection{::wxTrace}\label{wxtrace}
+
+\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
+
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+\membersection{::wxTraceLevel}\label{wxtracelevel}
+
+\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
+
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
\section{Time functions}\label{timefunctions}
The functions in this section deal with getting the current time and
<wx/timer.h>
+\membersection{::wxNow}\label{wxnow}
+
+\func{wxString}{wxNow}{\void}
+
+Returns a string representing the current date and time.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxSleep}\label{wxsleep}
+
+\func{void}{wxSleep}{\param{int}{ secs}}
+
+Sleeps for the specified number of seconds.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxStartTimer}\label{wxstarttimer}
\func{void}{wxStartTimer}{\void}
<wx/timer.h>
+\membersection{::wxUsleep}\label{wxusleep}
+
+\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
+
+Sleeps for the specified number of milliseconds. Notice that usage of this
+function is encouraged instead of calling usleep(3) directly because the
+standard usleep() function is not MT safe.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\section{Debugging macros and functions}\label{debugmacros}
-Useful macros and functions for error checking and defensive programming. ASSERTs are only
-compiled if \_\_WXDEBUG\_\_ is defined, whereas CHECK macros stay in release
-builds.
+Useful macros and functions for error checking and defensive programming.
+wxWindows defines three families of the assert-like macros:
+the wxASSERT and wxFAIL macros only do anything if \_\_WXDEBUG\_\_ is defined
+(in other words, in the debug build) but disappear completely in the release
+build. On the other hand, the wxCHECK macros stay event in release builds but a
+check failure doesn't generate any user-visible effects then. Finally, the
+compile time assertions don't happen during the run-time but result in the
+compilation error messages if the condition they check fail.
\wxheading{Include files}
\membersection{::wxOnAssert}\label{wxonassert}
-\func{void}{wxOnAssert}{\param{const char*}{ fileName}, \param{int}{ lineNumber}, \param{const char*}{ msg = NULL}}
+\func{void}{wxOnAssert}{\param{const char *}{fileName}, \param{int}{ lineNumber}, \param{const char *}{msg = NULL}}
+
+This function is called whenever one of debugging macros fails (i.e. condition
+is false in an assertion). It is only defined in the debug mode, in release
+builds the \helpref{wxCHECK}{wxcheck} failures don't result in anything.
-This function may be redefined to do something non trivial and is called
-whenever one of debugging macros fails (i.e. condition is false in an
-assertion).
-% TODO: this should probably be an overridable in wxApp.
+To override the default behaviour in the debug builds which is to show the user
+a dialog asking whether he wants to abort the program, continue or continue
+ignoring any subsequent assert failures, you may override
+\helpref{wxApp::OnAssert}{wxapponassert} which is called by this function if
+the global application object exists.
\membersection{wxASSERT}\label{wxassert}
Please note that the condition in wxASSERT() should have no side effects
because it will not be executed in release mode at all.
-See also: \helpref{wxASSERT\_MSG}{wxassertmsg}
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+\membersection{wxASSERT\_MIN\_BITSIZE}\label{wxassertminbitsize}
+
+\func{}{wxASSERT\_MIN\_BITSIZE}{\param{}{type}, \param{}{size}}
+
+This macro results in a
+\helpref{compile time assertion failure}{wxcompiletimeassert} if the size
+of the given type {\it type} is less than {\it size} bits.
+
+You may use it like this, for example:
+
+\begin{verbatim}
+ // we rely on the int being able to hold values up to 2^32
+ wxASSERT_MIN_BITSIZE(int, 32);
+
+ // can't work with the platforms using UTF-8 for wchar_t
+ wxASSERT_MIN_BITSIZE(wchar_t, 16);
+\end{verbatim}
\membersection{wxASSERT\_MSG}\label{wxassertmsg}
Assert macro with message. An error message will be generated if the condition is FALSE.
-See also: \helpref{wxASSERT}{wxassert}
+\wxheading{See also}
+
+\helpref{wxASSERT}{wxassert},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+\membersection{wxCOMPILE\_TIME\_ASSERT}\label{wxcompiletimeassert}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}}
+
+Using {\tt wxCOMPILE\_TIME\_ASSERT} results in a compilation error if the
+specified {\it condition} is false. The compiler error message should include
+the {\it msg} identifier - please note that it must be a valid C++ identifier
+and not a string unlike in the other cases.
+
+This macro is mostly useful for testing the expressions involing the
+{\tt sizeof} operator as they can't be tested by the preprocessor but it is
+sometimes desirable to test them at the compile time.
+
+Note that this macro internally declares a struct whose name it tries to make
+unique by using the {\tt \_\_LINE\_\_} in it but it may still not work if you
+use it on the same line in two different source files. In this case you may
+either change the line in which either of them appears on or use the
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2} macro.
+
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}
+
+\membersection{wxCOMPILE\_TIME\_ASSERT2}\label{wxcompiletimeassert2}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}, \param{}{name}}
+
+This macro is identical to \helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}
+except that it allows you to specify a unique {\it name} for the struct
+internally defined by this macro to avoid getting the compilation errors
+described \helpref{above}{wxcompiletimeassert}.
\membersection{wxFAIL}\label{wxfail}
it may be used in the "default:" branch of a switch statement if all possible
cases are processed above.
-See also: \helpref{wxFAIL}{wxfail}
+\wxheading{See also}
+
+\helpref{wxFAIL}{wxfail}
\membersection{wxCHECK}\label{wxcheck}
\helpref{wxFAIL\_MSG}{wxfailmsg} with the specified {\it msg} is called
instead of wxFAIL() if the {\it condition} is false.
+\membersection{::wxTrap}\label{wxtrap}
+
+\func{void}{wxTrap}{\void}
+
+In debug mode (when {\tt \_\_WXDEBUG\_\_} is defined) this function generates a
+debugger exception meaning that the control is passed to the debugger if one is
+attached to the process. Otherwise the program just terminates abnormally.
+
+In release mode this function does nothing.
+
+\wxheading{Include files}
+
+<wx/debug.h>
+
\section{Environment access functions}\label{environfunctions}
The functions in this section allow to access (get) or change value of
Returns {\tt TRUE} on success.
-
projects / wxWidgets.git / blobdiff