// Created: 28.12.2000
// RCS-ID: $Id$
// Copyright: (c) 2000 Robert Roebling
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
/*
drive:\dir1\dir2\...\dirN\filename.ext where drive is a single
letter. "." and ".." as for Unix but no "~".
- There are also UNC names of the form \\share\fullpath
+ There are also UNC names of the form \\share\fullpath and
+ MSW unique volume names of the form \\?\Volume{GUID}\fullpath.
- wxPATH_MAC: Mac OS 8/9 and Mac OS X under CodeWarrior 7 format, absolute file
+ The latter provide a uniform way to access a volume regardless of
+ its current mount point, i.e. you can change a volume's mount
+ point from D: to E:, or even remove it, and still be able to
+ access it through its unique volume name. More on the subject can
+ be found in MSDN's article "Naming a Volume" that is currently at
+ http://msdn.microsoft.com/en-us/library/aa365248(VS.85).aspx.
+
+
+ wxPATH_MAC: Mac OS 8/9 only, not used any longer, absolute file
names have the form
volume:dir1:...:dirN:filename
and the relative file names are either
Note that VMS uses different separators unlike Unix:
: always after the device. If the path does not contain : than
the default (the device of the current directory) is assumed.
- [ start of directory specyfication
+ [ start of directory specification
. separator between directory and subdirectory
] between directory and file
*/
// headers
// ----------------------------------------------------------------------------
-#ifdef __GNUG__
-#pragma implementation "filename.h"
-#endif
-
// For compilers that support precompilation, includes "wx.h".
#include "wx/wxprec.h"
#endif
#ifndef WX_PRECOMP
-#include "wx/intl.h"
-#include "wx/log.h"
-#include "wx/file.h"
+ #ifdef __WINDOWS__
+ #include "wx/msw/wrapwin.h" // For GetShort/LongPathName
+ #endif
+ #include "wx/dynarray.h"
+ #include "wx/intl.h"
+ #include "wx/log.h"
+ #include "wx/utils.h"
+ #include "wx/crt.h"
#endif
#include "wx/filename.h"
+#include "wx/private/filename.h"
#include "wx/tokenzr.h"
#include "wx/config.h" // for wxExpandEnvVars
-#include "wx/utils.h"
-#include "wx/file.h"
-//#include "wx/dynlib.h" // see GetLongPath below, code disabled.
-
-// For GetShort/LongPathName
-#ifdef __WIN32__
-#include <windows.h>
-#include "wx/msw/winundef.h"
+#include "wx/dynlib.h"
+#include "wx/dir.h"
+
+#if defined(__WIN32__) && defined(__MINGW32__)
+ #include "wx/msw/gccpriv.h"
+#endif
+
+#ifdef __WINDOWS__
+ #include "wx/msw/private.h"
+ #include <shlobj.h> // for CLSID_ShellLink
+ #include "wx/msw/missing.h"
#endif
#if defined(__WXMAC__)
- #include "wx/mac/private.h" // includes mac headers
+ #include "wx/osx/private.h" // includes mac headers
#endif
// utime() is POSIX so should normally be available on all Unices
#include <unistd.h>
#endif
-#ifdef __MWERKS__
-#include <stat.h>
-#include <unistd.h>
-#include <unix.h>
-#endif
-
#ifdef __WATCOMC__
#include <io.h>
#include <sys/utime.h>
#endif
#endif
+#ifdef __EMX__
+#include <os2.h>
+#define MAX_PATH _MAX_PATH
+#endif
+
+#ifndef S_ISREG
+ #define S_ISREG(mode) ((mode) & S_IFREG)
+#endif
+#ifndef S_ISDIR
+ #define S_ISDIR(mode) ((mode) & S_IFDIR)
+#endif
+
+#if wxUSE_LONGLONG
+extern const wxULongLong wxInvalidSize = (unsigned)-1;
+#endif // wxUSE_LONGLONG
+
+namespace
+{
+
// ----------------------------------------------------------------------------
// private classes
// ----------------------------------------------------------------------------
class wxFileHandle
{
public:
- wxFileHandle(const wxString& filename)
+ enum OpenMode
+ {
+ ReadAttr,
+ WriteAttr
+ };
+
+ wxFileHandle(const wxString& filename, OpenMode mode, int flags = 0)
{
+ // be careful and use FILE_{READ,WRITE}_ATTRIBUTES here instead of the
+ // usual GENERIC_{READ,WRITE} as we don't want the file access time to
+ // be changed when we open it because this class is used for setting
+ // access time (see #10567)
m_hFile = ::CreateFile
(
- filename, // name
- GENERIC_READ, // access mask
- 0, // no sharing
- NULL, // no secutity attr
- OPEN_EXISTING, // creation disposition
- 0, // no flags
- NULL // no template file
+ filename.t_str(), // name
+ mode == ReadAttr ? FILE_READ_ATTRIBUTES // access mask
+ : FILE_WRITE_ATTRIBUTES,
+ FILE_SHARE_READ | // sharing mode
+ FILE_SHARE_WRITE, // (allow everything)
+ NULL, // no secutity attr
+ OPEN_EXISTING, // creation disposition
+ flags, // flags
+ NULL // no template file
);
if ( m_hFile == INVALID_HANDLE_VALUE )
{
- wxLogSysError(_("Failed to open '%s' for reading"),
- filename.c_str());
+ if ( mode == ReadAttr )
+ {
+ wxLogSysError(_("Failed to open '%s' for reading"),
+ filename.c_str());
+ }
+ else
+ {
+ wxLogSysError(_("Failed to open '%s' for writing"),
+ filename.c_str());
+ }
}
}
}
}
- // return TRUE only if the file could be opened successfully
+ // return true only if the file could be opened successfully
bool IsOk() const { return m_hFile != INVALID_HANDLE_VALUE; }
// get the handle
// private functions
// ----------------------------------------------------------------------------
-#if defined(__WIN32__) && !defined(__WXMICROWIN__)
+#if wxUSE_DATETIME && defined(__WIN32__) && !defined(__WXMICROWIN__)
// convert between wxDateTime and FILETIME which is a 64-bit value representing
// the number of 100-nanosecond intervals since January 1, 1601.
-// the number of milliseconds between the Unix Epoch (January 1, 1970) and the
-// FILETIME reference point (January 1, 1601)
-static const wxLongLong FILETIME_EPOCH_OFFSET = wxLongLong(0xa97, 0x30b66800);
-
static void ConvertFileTimeToWx(wxDateTime *dt, const FILETIME &ft)
{
- wxLongLong ll(ft.dwHighDateTime, ft.dwLowDateTime);
-
- // convert 100ns to ms
- ll /= 10000;
+ FILETIME ftcopy = ft;
+ FILETIME ftLocal;
+ if ( !::FileTimeToLocalFileTime(&ftcopy, &ftLocal) )
+ {
+ wxLogLastError(wxT("FileTimeToLocalFileTime"));
+ }
- // move it to our Epoch
- ll -= FILETIME_EPOCH_OFFSET;
+ SYSTEMTIME st;
+ if ( !::FileTimeToSystemTime(&ftLocal, &st) )
+ {
+ wxLogLastError(wxT("FileTimeToSystemTime"));
+ }
- *dt = wxDateTime(ll);
+ dt->Set(st.wDay, wxDateTime::Month(st.wMonth - 1), st.wYear,
+ st.wHour, st.wMinute, st.wSecond, st.wMilliseconds);
}
static void ConvertWxToFileTime(FILETIME *ft, const wxDateTime& dt)
{
- // do the reverse of ConvertFileTimeToWx()
- wxLongLong ll = dt.GetValue();
- ll *= 10000;
- ll += FILETIME_EPOCH_OFFSET;
+ SYSTEMTIME st;
+ st.wDay = dt.GetDay();
+ st.wMonth = (WORD)(dt.GetMonth() + 1);
+ st.wYear = (WORD)dt.GetYear();
+ st.wHour = dt.GetHour();
+ st.wMinute = dt.GetMinute();
+ st.wSecond = dt.GetSecond();
+ st.wMilliseconds = dt.GetMillisecond();
+
+ FILETIME ftLocal;
+ if ( !::SystemTimeToFileTime(&st, &ftLocal) )
+ {
+ wxLogLastError(wxT("SystemTimeToFileTime"));
+ }
- ft->dwHighDateTime = ll.GetHi();
- ft->dwLowDateTime = ll.GetLo();
+ if ( !::LocalFileTimeToFileTime(&ftLocal, ft) )
+ {
+ wxLogLastError(wxT("LocalFileTimeToFileTime"));
+ }
}
-#endif // __WIN32__
+#endif // wxUSE_DATETIME && __WIN32__
+
+// return a string with the volume par
+static wxString wxGetVolumeString(const wxString& volume, wxPathFormat format)
+{
+ wxString path;
+
+ if ( !volume.empty() )
+ {
+ format = wxFileName::GetFormat(format);
+
+ // Special Windows UNC paths hack, part 2: undo what we did in
+ // SplitPath() and make an UNC path if we have a drive which is not a
+ // single letter (hopefully the network shares can't be one letter only
+ // although I didn't find any authoritative docs on this)
+ if ( format == wxPATH_DOS && volume.length() > 1 )
+ {
+ // We also have to check for Windows unique volume names here and
+ // return it with '\\?\' prepended to it
+ if ( wxFileName::IsMSWUniqueVolumeNamePath("\\\\?\\" + volume + "\\",
+ format) )
+ {
+ path << "\\\\?\\" << volume;
+ }
+ else
+ {
+ // it must be a UNC path
+ path << wxFILE_SEP_PATH_DOS << wxFILE_SEP_PATH_DOS << volume;
+ }
+ }
+ else if ( format == wxPATH_DOS || format == wxPATH_VMS )
+ {
+ path << volume << wxFileName::GetVolumeSeparator(format);
+ }
+ // else ignore
+ }
+
+ return path;
+}
+
+// return true if the character is a DOS path separator i.e. either a slash or
+// a backslash
+inline bool IsDOSPathSep(wxUniChar ch)
+{
+ return ch == wxFILE_SEP_PATH_DOS || ch == wxFILE_SEP_PATH_UNIX;
+}
+
+// return true if the format used is the DOS/Windows one and the string looks
+// like a UNC path
+static bool IsUNCPath(const wxString& path, wxPathFormat format)
+{
+ return format == wxPATH_DOS &&
+ path.length() >= 4 && // "\\a" can't be a UNC path
+ IsDOSPathSep(path[0u]) &&
+ IsDOSPathSep(path[1u]) &&
+ !IsDOSPathSep(path[2u]);
+}
+
+#ifndef __WIN32__
+
+// Under Unix-ish systems (basically everything except Windows) we may work
+// either with the file itself or its target if it's a symbolic link and we
+// should dereference it, as determined by wxFileName::ShouldFollowLink() and
+// the absence of the wxFILE_EXISTS_NO_FOLLOW flag. StatAny() can be used to
+// stat the appropriate file with an extra twist that it also works when there
+// is no wxFileName object at all, as is the case in static methods.
+
+// Private implementation, don't call directly, use one of the overloads below.
+bool DoStatAny(wxStructStat& st, wxString path, bool dereference)
+{
+ // We need to remove any trailing slashes from the path because they could
+ // interfere with the symlink following decision: even if we use lstat(),
+ // it would still follow the symlink if we pass it a path with a slash at
+ // the end because the symlink resolution would happen while following the
+ // path and not for the last path element itself.
+
+ while ( wxEndsWithPathSeparator(path) )
+ {
+ const size_t posLast = path.length() - 1;
+ if ( !posLast )
+ {
+ // Don't turn "/" into empty string.
+ break;
+ }
+
+ path.erase(posLast);
+ }
+
+ int ret = dereference ? wxStat(path, &st) : wxLstat(path, &st);
+ return ret == 0;
+}
+
+// Overloads to use for a case when we don't have wxFileName object and when we
+// do have one.
+inline
+bool StatAny(wxStructStat& st, const wxString& path, int flags)
+{
+ return DoStatAny(st, path, !(flags & wxFILE_EXISTS_NO_FOLLOW));
+}
+
+inline
+bool StatAny(wxStructStat& st, const wxFileName& fn)
+{
+ return DoStatAny(st, fn.GetFullPath(), fn.ShouldFollowLink());
+}
+
+#endif // !__WIN32__
+
+// ----------------------------------------------------------------------------
+// private constants
+// ----------------------------------------------------------------------------
+
+// length of \\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ string
+static const size_t wxMSWUniqueVolumePrefixLength = 49;
+
+} // anonymous namespace
// ============================================================================
// implementation
m_dirs = filepath.GetDirs();
m_name = filepath.GetName();
m_ext = filepath.GetExt();
- m_relative = filepath.IsRelative();
+ m_relative = filepath.m_relative;
+ m_hasExt = filepath.m_hasExt;
+ m_dontFollowLinks = filepath.m_dontFollowLinks;
}
void wxFileName::Assign(const wxString& volume,
const wxString& path,
const wxString& name,
const wxString& ext,
- wxPathFormat format )
+ bool hasExt,
+ wxPathFormat format)
{
- SetPath( path, format );
+ // we should ignore paths which look like UNC shares because we already
+ // have the volume here and the UNC notation (\\server\path) is only valid
+ // for paths which don't start with a volume, so prevent SetPath() from
+ // recognizing "\\foo\bar" in "c:\\foo\bar" as an UNC path
+ //
+ // note also that this is a rather ugly way to do what we want (passing
+ // some kind of flag telling to ignore UNC paths to SetPath() would be
+ // better) but this is the safest thing to do to avoid breaking backwards
+ // compatibility in 2.8
+ if ( IsUNCPath(path, format) )
+ {
+ // remove one of the 2 leading backslashes to ensure that it's not
+ // recognized as an UNC path by SetPath()
+ wxString pathNonUNC(path, 1, wxString::npos);
+ SetPath(pathNonUNC, format);
+ }
+ else // no UNC complications
+ {
+ SetPath(path, format);
+ }
m_volume = volume;
m_ext = ext;
m_name = name;
+
+ m_hasExt = hasExt;
}
-void wxFileName::SetPath( const wxString &path, wxPathFormat format )
+void wxFileName::SetPath( const wxString& pathOrig, wxPathFormat format )
{
- wxPathFormat my_format = GetFormat( format );
- wxString my_path = path;
-
m_dirs.Clear();
- if (!my_path.empty())
+ if ( pathOrig.empty() )
{
- // 1) Determine if the path is relative or absolute.
+ // no path at all
+ m_relative = true;
- switch (my_format)
- {
- case wxPATH_MAC:
- m_relative = ( my_path[0u] == wxT(':') );
- // We then remove a leading ":". The reason is in our
- // storage form for relative paths:
- // ":dir:file.txt" actually means "./dir/file.txt" in
- // DOS notation and should get stored as
- // (relative) (dir) (file.txt)
- // "::dir:file.txt" actually means "../dir/file.txt"
- // stored as (relative) (..) (dir) (file.txt)
- // This is important only for the Mac as an empty dir
- // actually means <UP>, whereas under DOS, double
- // slashes can be ignored: "\\\\" is the same as "\\".
- if (m_relative)
- my_path.Remove( 0, 1 );
- break;
- case wxPATH_VMS:
- // TODO: what is the relative path format here?
- m_relative = FALSE;
- break;
- case wxPATH_UNIX:
- m_relative = ( my_path[0u] != wxT('/') );
- break;
- case wxPATH_DOS:
- m_relative = ( (my_path[0u] != wxT('/')) && (my_path[0u] != wxT('\\')) );
- break;
- default:
- wxFAIL_MSG( wxT("error") );
- break;
- }
+ return;
+ }
+
+ format = GetFormat( format );
- // 2) Break up the path into its members. If the original path
- // was just "/" or "\\", m_dirs will be empty. We know from
- // the m_relative field, if this means "nothing" or "root dir".
+ // 0) deal with possible volume part first
+ wxString volume,
+ path;
+ SplitVolume(pathOrig, &volume, &path, format);
+ if ( !volume.empty() )
+ {
+ m_relative = false;
- wxStringTokenizer tn( my_path, GetPathSeparators(my_format) );
+ SetVolume(volume);
+ }
- while ( tn.HasMoreTokens() )
- {
- wxString token = tn.GetNextToken();
+ // 1) Determine if the path is relative or absolute.
- // Remove empty token under DOS and Unix, interpret them
- // as .. under Mac.
- if (token.empty())
- {
- if (my_format == wxPATH_MAC)
- m_dirs.Add( wxT("..") );
- // else ignore
- }
- else
- {
- m_dirs.Add( token );
- }
- }
+ if ( path.empty() )
+ {
+ // we had only the volume
+ return;
}
- else
+
+ wxChar leadingChar = path[0u];
+
+ switch (format)
+ {
+ case wxPATH_MAC:
+ m_relative = leadingChar == wxT(':');
+
+ // We then remove a leading ":". The reason is in our
+ // storage form for relative paths:
+ // ":dir:file.txt" actually means "./dir/file.txt" in
+ // DOS notation and should get stored as
+ // (relative) (dir) (file.txt)
+ // "::dir:file.txt" actually means "../dir/file.txt"
+ // stored as (relative) (..) (dir) (file.txt)
+ // This is important only for the Mac as an empty dir
+ // actually means <UP>, whereas under DOS, double
+ // slashes can be ignored: "\\\\" is the same as "\\".
+ if (m_relative)
+ path.erase( 0, 1 );
+ break;
+
+ case wxPATH_VMS:
+ // TODO: what is the relative path format here?
+ m_relative = false;
+ break;
+
+ default:
+ wxFAIL_MSG( wxT("Unknown path format") );
+ // !! Fall through !!
+
+ case wxPATH_UNIX:
+ m_relative = leadingChar != wxT('/');
+ break;
+
+ case wxPATH_DOS:
+ m_relative = !IsPathSeparator(leadingChar, format);
+ break;
+
+ }
+
+ // 2) Break up the path into its members. If the original path
+ // was just "/" or "\\", m_dirs will be empty. We know from
+ // the m_relative field, if this means "nothing" or "root dir".
+
+ wxStringTokenizer tn( path, GetPathSeparators(format) );
+
+ while ( tn.HasMoreTokens() )
{
- m_relative = TRUE;
+ wxString token = tn.GetNextToken();
+
+ // Remove empty token under DOS and Unix, interpret them
+ // as .. under Mac.
+ if (token.empty())
+ {
+ if (format == wxPATH_MAC)
+ m_dirs.Add( wxT("..") );
+ // else ignore
+ }
+ else
+ {
+ m_dirs.Add( token );
+ }
}
}
wxPathFormat format)
{
wxString volume, path, name, ext;
- SplitPath(fullpath, &volume, &path, &name, &ext, format);
+ bool hasExt;
+ SplitPath(fullpath, &volume, &path, &name, &ext, &hasExt, format);
- Assign(volume, path, name, ext, format);
+ Assign(volume, path, name, ext, hasExt, format);
}
void wxFileName::Assign(const wxString& fullpathOrig,
// always recognize fullpath as directory, even if it doesn't end with a
// slash
wxString fullpath = fullpathOrig;
- if ( !wxEndsWithPathSeparator(fullpath) )
+ if ( !fullpath.empty() && !wxEndsWithPathSeparator(fullpath) )
{
- fullpath += GetPathSeparators(format)[0u];
+ fullpath += GetPathSeparator(format);
}
wxString volume, path, name, ext;
+ bool hasExt;
- // do some consistency checks in debug mode: the name should be really just
- // the filename and the path should be really just a path
-#ifdef __WXDEBUG__
- wxString pathDummy, nameDummy, extDummy;
+ // do some consistency checks: the name should be really just the filename
+ // and the path should be really just a path
+ wxString volDummy, pathDummy, nameDummy, extDummy;
- SplitPath(fullname, &pathDummy, &name, &ext, format);
+ SplitPath(fullname, &volDummy, &pathDummy, &name, &ext, &hasExt, format);
- wxASSERT_MSG( pathDummy.empty(),
- _T("the file name shouldn't contain the path") );
+ wxASSERT_MSG( volDummy.empty() && pathDummy.empty(),
+ wxT("the file name shouldn't contain the path") );
SplitPath(fullpath, &volume, &path, &nameDummy, &extDummy, format);
- wxASSERT_MSG( nameDummy.empty() && extDummy.empty(),
- _T("the path shouldn't contain file name nor extension") );
+#ifndef __VMS
+ // This test makes no sense on an OpenVMS system.
+ wxASSERT_MSG( nameDummy.empty() && extDummy.empty(),
+ wxT("the path shouldn't contain file name nor extension") );
+#endif
+ Assign(volume, path, name, ext, hasExt, format);
+}
-#else // !__WXDEBUG__
- SplitPath(fullname, NULL /* no path */, &name, &ext, format);
- SplitPath(fullpath, &volume, &path, NULL, NULL, format);
-#endif // __WXDEBUG__/!__WXDEBUG__
+void wxFileName::Assign(const wxString& pathOrig,
+ const wxString& name,
+ const wxString& ext,
+ wxPathFormat format)
+{
+ wxString volume,
+ path;
+ SplitVolume(pathOrig, &volume, &path, format);
Assign(volume, path, name, ext, format);
}
void wxFileName::AssignDir(const wxString& dir, wxPathFormat format)
{
- Assign(dir, _T(""), format);
+ Assign(dir, wxEmptyString, format);
}
void wxFileName::Clear()
{
- m_dirs.Clear();
+ m_dirs.clear();
+ m_volume.clear();
+ m_name.clear();
+ m_ext.clear();
+
+ // we don't have any absolute path for now
+ m_relative = true;
- m_volume =
- m_name =
- m_ext = wxEmptyString;
+ // nor any extension
+ m_hasExt = false;
+
+ // follow symlinks by default
+ m_dontFollowLinks = false;
}
/* static */
-wxFileName wxFileName::FileName(const wxString& file)
+wxFileName wxFileName::FileName(const wxString& file, wxPathFormat format)
{
- return wxFileName(file);
+ return wxFileName(file, format);
}
/* static */
-wxFileName wxFileName::DirName(const wxString& dir)
+wxFileName wxFileName::DirName(const wxString& dir, wxPathFormat format)
{
wxFileName fn;
- fn.AssignDir(dir);
+ fn.AssignDir(dir, format);
return fn;
}
// existence tests
// ----------------------------------------------------------------------------
-bool wxFileName::FileExists()
+namespace
+{
+
+#if defined(__WINDOWS__) && !defined(__WXMICROWIN__)
+
+void RemoveTrailingSeparatorsFromPath(wxString& strPath)
+{
+ // Windows fails to find directory named "c:\dir\" even if "c:\dir" exists,
+ // so remove all trailing backslashes from the path - but don't do this for
+ // the paths "d:\" (which are different from "d:"), for just "\" or for
+ // windows unique volume names ("\\?\Volume{GUID}\")
+ while ( wxEndsWithPathSeparator( strPath ) )
+ {
+ size_t len = strPath.length();
+ if ( len == 1 || (len == 3 && strPath[len - 2] == wxT(':')) ||
+ (len == wxMSWUniqueVolumePrefixLength &&
+ wxFileName::IsMSWUniqueVolumeNamePath(strPath)))
+ {
+ break;
+ }
+
+ strPath.Truncate(len - 1);
+ }
+}
+
+#endif // __WINDOWS__ || __OS2__
+
+bool
+wxFileSystemObjectExists(const wxString& path, int flags)
+{
+
+ // Should the existence of file/directory with this name be accepted, i.e.
+ // result in the true return value from this function?
+ const bool acceptFile = (flags & wxFILE_EXISTS_REGULAR) != 0;
+ const bool acceptDir = (flags & wxFILE_EXISTS_DIR) != 0;
+
+ wxString strPath(path);
+
+#if defined(__WINDOWS__) && !defined(__WXMICROWIN__)
+ if ( acceptDir )
+ {
+ // Ensure that the path doesn't have any trailing separators when
+ // checking for directories.
+ RemoveTrailingSeparatorsFromPath(strPath);
+ }
+
+ // we must use GetFileAttributes() instead of the ANSI C functions because
+ // it can cope with network (UNC) paths unlike them
+ DWORD ret = ::GetFileAttributes(strPath.t_str());
+
+ if ( ret == INVALID_FILE_ATTRIBUTES )
+ return false;
+
+ if ( ret & FILE_ATTRIBUTE_DIRECTORY )
+ return acceptDir;
+
+ // Anything else must be a file (perhaps we should check for
+ // FILE_ATTRIBUTE_REPARSE_POINT?)
+ return acceptFile;
+#elif defined(__OS2__)
+ if ( acceptDir )
+ {
+ // OS/2 can't handle "d:", it wants either "d:\" or "d:."
+ if (strPath.length() == 2 && strPath[1u] == wxT(':'))
+ strPath << wxT('.');
+ }
+
+ FILESTATUS3 Info = {{0}};
+ APIRET rc = ::DosQueryPathInfo((PSZ)(WXSTRINGCAST strPath), FIL_STANDARD,
+ (void*) &Info, sizeof(FILESTATUS3));
+
+ if ( rc == NO_ERROR )
+ {
+ if ( Info.attrFile & FILE_DIRECTORY )
+ return acceptDir;
+ else
+ return acceptFile;
+ }
+
+ // We consider that the path must exist if we get a sharing violation for
+ // it but we don't know what is it in this case.
+ if ( rc == ERROR_SHARING_VIOLATION )
+ return flags & wxFILE_EXISTS_ANY;
+
+ // Any other error (usually ERROR_PATH_NOT_FOUND), means there is nothing
+ // there.
+ return false;
+#else // Non-MSW, non-OS/2
+ wxStructStat st;
+ if ( !StatAny(st, strPath, flags) )
+ return false;
+
+ if ( S_ISREG(st.st_mode) )
+ return acceptFile;
+ if ( S_ISDIR(st.st_mode) )
+ return acceptDir;
+ if ( S_ISLNK(st.st_mode) )
+ {
+ // Take care to not test for "!= 0" here as this would erroneously
+ // return true if only wxFILE_EXISTS_NO_FOLLOW, which is part of
+ // wxFILE_EXISTS_SYMLINK, is set too.
+ return (flags & wxFILE_EXISTS_SYMLINK) == wxFILE_EXISTS_SYMLINK;
+ }
+ if ( S_ISBLK(st.st_mode) || S_ISCHR(st.st_mode) )
+ return (flags & wxFILE_EXISTS_DEVICE) != 0;
+ if ( S_ISFIFO(st.st_mode) )
+ return (flags & wxFILE_EXISTS_FIFO) != 0;
+ if ( S_ISSOCK(st.st_mode) )
+ return (flags & wxFILE_EXISTS_SOCKET) != 0;
+
+ return flags & wxFILE_EXISTS_ANY;
+#endif // Platforms
+}
+
+} // anonymous namespace
+
+bool wxFileName::FileExists() const
+{
+ int flags = wxFILE_EXISTS_REGULAR;
+ if ( !ShouldFollowLink() )
+ flags |= wxFILE_EXISTS_NO_FOLLOW;
+
+ return wxFileSystemObjectExists(GetFullPath(), flags);
+}
+
+/* static */
+bool wxFileName::FileExists( const wxString &filePath )
+{
+ return wxFileSystemObjectExists(filePath, wxFILE_EXISTS_REGULAR);
+}
+
+bool wxFileName::DirExists() const
{
- return wxFileName::FileExists( GetFullPath() );
+ int flags = wxFILE_EXISTS_DIR;
+ if ( !ShouldFollowLink() )
+ flags |= wxFILE_EXISTS_NO_FOLLOW;
+
+ return Exists(GetPath(), flags);
}
-bool wxFileName::FileExists( const wxString &file )
+/* static */
+bool wxFileName::DirExists( const wxString &dirPath )
{
- return ::wxFileExists( file );
+ return wxFileSystemObjectExists(dirPath, wxFILE_EXISTS_DIR);
}
-bool wxFileName::DirExists()
+bool wxFileName::Exists(int flags) const
{
- return wxFileName::DirExists( GetFullPath() );
+ // Notice that wxFILE_EXISTS_NO_FOLLOW may be specified in the flags even
+ // if our DontFollowLink() hadn't been called and we do honour it then. But
+ // if the user took the care of calling DontFollowLink(), it is always
+ // taken into account.
+ if ( !ShouldFollowLink() )
+ flags |= wxFILE_EXISTS_NO_FOLLOW;
+
+ return wxFileSystemObjectExists(GetFullPath(), flags);
}
-bool wxFileName::DirExists( const wxString &dir )
+/* static */
+bool wxFileName::Exists(const wxString& path, int flags)
{
- return ::wxDirExists( dir );
+ return wxFileSystemObjectExists(path, flags);
}
// ----------------------------------------------------------------------------
return cwd;
}
-bool wxFileName::SetCwd()
+bool wxFileName::SetCwd() const
{
- return wxFileName::SetCwd( GetFullPath() );
+ return wxFileName::SetCwd( GetPath() );
}
bool wxFileName::SetCwd( const wxString &cwd )
return ::wxGetHomeDir();
}
-void wxFileName::AssignTempFileName(const wxString& prefix, wxFile *fileTemp)
-{
- wxString tempname = CreateTempFileName(prefix, fileTemp);
- if ( tempname.empty() )
- {
- // error, failed to get temp file name
- Clear();
- }
- else // ok
- {
- Assign(tempname);
- }
-}
-/* static */
-wxString
-wxFileName::CreateTempFileName(const wxString& prefix, wxFile *fileTemp)
-{
- wxString path, dir, name;
+// ----------------------------------------------------------------------------
+// CreateTempFileName
+// ----------------------------------------------------------------------------
- // use the directory specified by the prefix
- SplitPath(prefix, &dir, &name, NULL /* extension */);
+#if wxUSE_FILE || wxUSE_FFILE
-#if defined(__WINDOWS__) && !defined(__WXMICROWIN__)
-#ifdef __WIN32__
- if ( dir.empty() )
- {
- if ( !::GetTempPath(MAX_PATH, wxStringBuffer(dir, MAX_PATH + 1)) )
- {
- wxLogLastError(_T("GetTempPath"));
- }
+#if !defined wx_fdopen && defined HAVE_FDOPEN
+ #define wx_fdopen fdopen
+#endif
- if ( dir.empty() )
- {
- // GetTempFileName() fails if we pass it an empty string
- dir = _T('.');
- }
- }
+// NB: GetTempFileName() under Windows creates the file, so using
+// O_EXCL there would fail
+#ifdef __WINDOWS__
+ #define wxOPEN_EXCL 0
+#else
+ #define wxOPEN_EXCL O_EXCL
+#endif
- if ( !::GetTempFileName(dir, name, 0, wxStringBuffer(path, MAX_PATH + 1)) )
- {
- wxLogLastError(_T("GetTempFileName"));
- path.clear();
- }
-#else // Win16
- if ( !::GetTempFileName(NULL, prefix, 0, wxStringBuffer(path, 1025)) )
- {
- path.clear();
- }
-#endif // Win32/16
+#ifdef wxOpenOSFHandle
+#define WX_HAVE_DELETE_ON_CLOSE
+// On Windows create a file with the FILE_FLAGS_DELETE_ON_CLOSE flags.
+//
+static int wxOpenWithDeleteOnClose(const wxString& filename)
+{
+ DWORD access = GENERIC_READ | GENERIC_WRITE;
-#elif defined(__WXPM__)
- // for now just create a file
- //
- // future enhancements can be to set some extended attributes for file
- // systems OS/2 supports that have them (HPFS, FAT32) and security
- // (HPFS386)
- static const wxChar *szMktempSuffix = wxT("XXX");
- path << dir << _T('/') << name << szMktempSuffix;
-
- // Temporarily remove - MN
- #ifndef __WATCOMC__
- ::DosCreateDir(wxStringBuffer(path, MAX_PATH), NULL);
- #endif
+ DWORD disposition = OPEN_ALWAYS;
-#else // !Windows, !OS/2
- if ( dir.empty() )
- {
-#if defined(__WXMAC__) && !defined(__DARWIN__)
- dir = wxMacFindFolder( (short) kOnSystemDisk, pTemporaryFolder, kCreateFolder ) ;
-#else // !Mac
- dir = wxGetenv(_T("TMP"));
- if ( dir.empty() )
- {
- dir = wxGetenv(_T("TEMP"));
- }
+ DWORD attributes = FILE_ATTRIBUTE_TEMPORARY |
+ FILE_FLAG_DELETE_ON_CLOSE;
- if ( dir.empty() )
- {
- // default
- #ifdef __DOS__
- dir = _T(".");
- #else
- dir = _T("/tmp");
- #endif
- }
-#endif // Mac/!Mac
+ HANDLE h = ::CreateFile(filename.t_str(), access, 0, NULL,
+ disposition, attributes, NULL);
+
+ return wxOpenOSFHandle(h, wxO_BINARY);
+}
+#endif // wxOpenOSFHandle
+
+
+// Helper to open the file
+//
+static int wxTempOpen(const wxString& path, bool *deleteOnClose)
+{
+#ifdef WX_HAVE_DELETE_ON_CLOSE
+ if (*deleteOnClose)
+ return wxOpenWithDeleteOnClose(path);
+#endif
+
+ *deleteOnClose = false;
+
+ return wxOpen(path, wxO_BINARY | O_RDWR | O_CREAT | wxOPEN_EXCL, 0600);
+}
+
+
+#if wxUSE_FFILE
+// Helper to open the file and attach it to the wxFFile
+//
+static bool wxTempOpen(wxFFile *file, const wxString& path, bool *deleteOnClose)
+{
+#ifndef wx_fdopen
+ *deleteOnClose = false;
+ return file->Open(path, wxT("w+b"));
+#else // wx_fdopen
+ int fd = wxTempOpen(path, deleteOnClose);
+ if (fd == -1)
+ return false;
+ file->Attach(wx_fdopen(fd, "w+b"), path);
+ return file->IsOpened();
+#endif // wx_fdopen
+}
+#endif // wxUSE_FFILE
+
+
+#if !wxUSE_FILE
+ #define WXFILEARGS(x, y) y
+#elif !wxUSE_FFILE
+ #define WXFILEARGS(x, y) x
+#else
+ #define WXFILEARGS(x, y) x, y
+#endif
+
+
+// Implementation of wxFileName::CreateTempFileName().
+//
+static wxString wxCreateTempImpl(
+ const wxString& prefix,
+ WXFILEARGS(wxFile *fileTemp, wxFFile *ffileTemp),
+ bool *deleteOnClose = NULL)
+{
+#if wxUSE_FILE && wxUSE_FFILE
+ wxASSERT(fileTemp == NULL || ffileTemp == NULL);
+#endif
+ wxString path, dir, name;
+ bool wantDeleteOnClose = false;
+
+ if (deleteOnClose)
+ {
+ // set the result to false initially
+ wantDeleteOnClose = *deleteOnClose;
+ *deleteOnClose = false;
+ }
+ else
+ {
+ // easier if it alwasys points to something
+ deleteOnClose = &wantDeleteOnClose;
+ }
+
+ // use the directory specified by the prefix
+ wxFileName::SplitPath(prefix, &dir, &name, NULL /* extension */);
+
+ if (dir.empty())
+ {
+ dir = wxFileName::GetTempDir();
}
+#if defined(__WXWINCE__)
+ path = dir + wxT("\\") + name;
+ int i = 1;
+ while (wxFileName::FileExists(path))
+ {
+ path = dir + wxT("\\") + name ;
+ path << i;
+ i ++;
+ }
+
+#elif defined(__WINDOWS__) && !defined(__WXMICROWIN__)
+ if (!::GetTempFileName(dir.t_str(), name.t_str(), 0,
+ wxStringBuffer(path, MAX_PATH + 1)))
+ {
+ wxLogLastError(wxT("GetTempFileName"));
+
+ path.clear();
+ }
+
+#else // !Windows
path = dir;
if ( !wxEndsWithPathSeparator(dir) &&
#if defined(HAVE_MKSTEMP)
// scratch space for mkstemp()
- path += _T("XXXXXX");
+ path += wxT("XXXXXX");
+
+ // we need to copy the path to the buffer in which mkstemp() can modify it
+ wxCharBuffer buf(path.fn_str());
- // can use the cast here because the length doesn't change and the string
- // is not shared
- int fdTemp = mkstemp((char *)path.mb_str());
+ // cast is safe because the string length doesn't change
+ int fdTemp = mkstemp( (char*)(const char*) buf );
if ( fdTemp == -1 )
{
// this might be not necessary as mkstemp() on most systems should have
}
else // mkstemp() succeeded
{
+ path = wxConvFile.cMB2WX( (const char*) buf );
+
+ #if wxUSE_FILE
// avoid leaking the fd
if ( fileTemp )
{
fileTemp->Attach(fdTemp);
}
else
+ #endif
+
+ #if wxUSE_FFILE
+ if ( ffileTemp )
+ {
+ #ifdef wx_fdopen
+ ffileTemp->Attach(wx_fdopen(fdTemp, "r+b"), path);
+ #else
+ ffileTemp->Open(path, wxT("r+b"));
+ close(fdTemp);
+ #endif
+ }
+ else
+ #endif
+
{
close(fdTemp);
}
#ifdef HAVE_MKTEMP
// same as above
- path += _T("XXXXXX");
+ path += wxT("XXXXXX");
- if ( !mktemp((char *)path.mb_str()) )
+ wxCharBuffer buf = wxConvFile.cWX2MB( path );
+ if ( !mktemp( (char*)(const char*) buf ) )
{
path.clear();
}
+ else
+ {
+ path = wxConvFile.cMB2WX( (const char*) buf );
+ }
#else // !HAVE_MKTEMP (includes __DOS__)
// generate the unique file name ourselves
- #ifndef __DOS__
+ #if !defined(__DOS__)
path << (unsigned int)getpid();
#endif
for ( size_t n = 0; n < numTries; n++ )
{
// 3 hex digits is enough for numTries == 1000 < 4096
- pathTry = path + wxString::Format(_T("%.03x"), n);
- if ( !wxFile::Exists(pathTry) )
+ pathTry = path + wxString::Format(wxT("%.03x"), (unsigned int) n);
+ if ( !wxFileName::FileExists(pathTry) )
{
break;
}
path = pathTry;
#endif // HAVE_MKTEMP/!HAVE_MKTEMP
- if ( !path.empty() )
- {
- }
#endif // HAVE_MKSTEMP/!HAVE_MKSTEMP
#endif // Windows/!Windows
{
wxLogSysError(_("Failed to create a temporary file name"));
}
- else if ( fileTemp && !fileTemp->IsOpened() )
+ else
{
+ bool ok = true;
+
// open the file - of course, there is a race condition here, this is
// why we always prefer using mkstemp()...
- //
- // NB: GetTempFileName() under Windows creates the file, so using
- // write_excl there would fail
- if ( !fileTemp->Open(path,
-#if defined(__WINDOWS__) && !defined(__WXMICROWIN__)
- wxFile::write,
-#else
- wxFile::write_excl,
-#endif
- wxS_IRUSR | wxS_IWUSR) )
+ #if wxUSE_FILE
+ if ( fileTemp && !fileTemp->IsOpened() )
+ {
+ *deleteOnClose = wantDeleteOnClose;
+ int fd = wxTempOpen(path, deleteOnClose);
+ if (fd != -1)
+ fileTemp->Attach(fd);
+ else
+ ok = false;
+ }
+ #endif
+
+ #if wxUSE_FFILE
+ if ( ffileTemp && !ffileTemp->IsOpened() )
+ {
+ *deleteOnClose = wantDeleteOnClose;
+ ok = wxTempOpen(ffileTemp, path, deleteOnClose);
+ }
+ #endif
+
+ if ( !ok )
{
// FIXME: If !ok here should we loop and try again with another
// file name? That is the standard recourse if open(O_EXCL)
return path;
}
+
+static bool wxCreateTempImpl(
+ const wxString& prefix,
+ WXFILEARGS(wxFile *fileTemp, wxFFile *ffileTemp),
+ wxString *name)
+{
+ bool deleteOnClose = true;
+
+ *name = wxCreateTempImpl(prefix,
+ WXFILEARGS(fileTemp, ffileTemp),
+ &deleteOnClose);
+
+ bool ok = !name->empty();
+
+ if (deleteOnClose)
+ name->clear();
+#ifdef __UNIX__
+ else if (ok && wxRemoveFile(*name))
+ name->clear();
+#endif
+
+ return ok;
+}
+
+
+static void wxAssignTempImpl(
+ wxFileName *fn,
+ const wxString& prefix,
+ WXFILEARGS(wxFile *fileTemp, wxFFile *ffileTemp))
+{
+ wxString tempname;
+ tempname = wxCreateTempImpl(prefix, WXFILEARGS(fileTemp, ffileTemp));
+
+ if ( tempname.empty() )
+ {
+ // error, failed to get temp file name
+ fn->Clear();
+ }
+ else // ok
+ {
+ fn->Assign(tempname);
+ }
+}
+
+
+void wxFileName::AssignTempFileName(const wxString& prefix)
+{
+ wxAssignTempImpl(this, prefix, WXFILEARGS(NULL, NULL));
+}
+
+/* static */
+wxString wxFileName::CreateTempFileName(const wxString& prefix)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(NULL, NULL));
+}
+
+#endif // wxUSE_FILE || wxUSE_FFILE
+
+
+#if wxUSE_FILE
+
+wxString wxCreateTempFileName(const wxString& prefix,
+ wxFile *fileTemp,
+ bool *deleteOnClose)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(fileTemp, NULL), deleteOnClose);
+}
+
+bool wxCreateTempFile(const wxString& prefix,
+ wxFile *fileTemp,
+ wxString *name)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(fileTemp, NULL), name);
+}
+
+void wxFileName::AssignTempFileName(const wxString& prefix, wxFile *fileTemp)
+{
+ wxAssignTempImpl(this, prefix, WXFILEARGS(fileTemp, NULL));
+}
+
+/* static */
+wxString
+wxFileName::CreateTempFileName(const wxString& prefix, wxFile *fileTemp)
+{
+ return wxCreateTempFileName(prefix, fileTemp);
+}
+
+#endif // wxUSE_FILE
+
+
+#if wxUSE_FFILE
+
+wxString wxCreateTempFileName(const wxString& prefix,
+ wxFFile *fileTemp,
+ bool *deleteOnClose)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(NULL, fileTemp), deleteOnClose);
+}
+
+bool wxCreateTempFile(const wxString& prefix,
+ wxFFile *fileTemp,
+ wxString *name)
+{
+ return wxCreateTempImpl(prefix, WXFILEARGS(NULL, fileTemp), name);
+
+}
+
+void wxFileName::AssignTempFileName(const wxString& prefix, wxFFile *fileTemp)
+{
+ wxAssignTempImpl(this, prefix, WXFILEARGS(NULL, fileTemp));
+}
+
+/* static */
+wxString
+wxFileName::CreateTempFileName(const wxString& prefix, wxFFile *fileTemp)
+{
+ return wxCreateTempFileName(prefix, fileTemp);
+}
+
+#endif // wxUSE_FFILE
+
+
// ----------------------------------------------------------------------------
// directory operations
// ----------------------------------------------------------------------------
-bool wxFileName::Mkdir( int perm, bool full )
+// helper of GetTempDir(): check if the given directory exists and return it if
+// it does or an empty string otherwise
+namespace
{
- return wxFileName::Mkdir( GetFullPath(), perm, full );
+
+wxString CheckIfDirExists(const wxString& dir)
+{
+ return wxFileName::DirExists(dir) ? dir : wxString();
}
-bool wxFileName::Mkdir( const wxString &dir, int perm, bool full )
+} // anonymous namespace
+
+wxString wxFileName::GetTempDir()
{
- if (full)
+ // first try getting it from environment: this allows overriding the values
+ // used by default if the user wants to create temporary files in another
+ // directory
+ wxString dir = CheckIfDirExists(wxGetenv("TMPDIR"));
+ if ( dir.empty() )
{
- wxFileName filename(dir);
- wxArrayString dirs = filename.GetDirs();
- dirs.Add(filename.GetName());
+ dir = CheckIfDirExists(wxGetenv("TMP"));
+ if ( dir.empty() )
+ dir = CheckIfDirExists(wxGetenv("TEMP"));
+ }
+
+ // if no environment variables are set, use the system default
+ if ( dir.empty() )
+ {
+#if defined(__WXWINCE__)
+ dir = CheckIfDirExists(wxT("\\temp"));
+#elif defined(__WINDOWS__) && !defined(__WXMICROWIN__)
+ if ( !::GetTempPath(MAX_PATH, wxStringBuffer(dir, MAX_PATH + 1)) )
+ {
+ wxLogLastError(wxT("GetTempPath"));
+ }
+#elif defined(__WXMAC__) && wxOSX_USE_CARBON
+ dir = wxMacFindFolderNoSeparator(short(kOnSystemDisk), kTemporaryFolderType, kCreateFolder);
+#endif // systems with native way
+ }
+ else // we got directory from an environment variable
+ {
+ // remove any trailing path separators, we don't want to ever return
+ // them from this function for consistency
+ const size_t lastNonSep = dir.find_last_not_of(GetPathSeparators());
+ if ( lastNonSep == wxString::npos )
+ {
+ // the string consists entirely of separators, leave only one
+ dir = GetPathSeparator();
+ }
+ else
+ {
+ dir.erase(lastNonSep + 1);
+ }
+ }
+
+ // fall back to hard coded value
+ if ( dir.empty() )
+ {
+#ifdef __UNIX_LIKE__
+ dir = CheckIfDirExists("/tmp");
+ if ( dir.empty() )
+#endif // __UNIX_LIKE__
+ dir = ".";
+ }
+
+ return dir;
+}
+
+bool wxFileName::Mkdir( int perm, int flags ) const
+{
+ return wxFileName::Mkdir(GetPath(), perm, flags);
+}
+
+bool wxFileName::Mkdir( const wxString& dir, int perm, int flags )
+{
+ if ( flags & wxPATH_MKDIR_FULL )
+ {
+ // split the path in components
+ wxFileName filename;
+ filename.AssignDir(dir);
- size_t count = dirs.GetCount();
- size_t i;
wxString currPath;
- int noErrors = 0;
- for ( i = 0; i < count; i++ )
+ if ( filename.HasVolume())
{
- currPath += dirs[i];
+ currPath << wxGetVolumeString(filename.GetVolume(), wxPATH_NATIVE);
+ }
- if (currPath.Last() == wxT(':'))
- {
- // Can't create a root directory so continue to next dir
+ wxArrayString dirs = filename.GetDirs();
+ size_t count = dirs.GetCount();
+ for ( size_t i = 0; i < count; i++ )
+ {
+ if ( i > 0 || filename.IsAbsolute() )
currPath += wxFILE_SEP_PATH;
- continue;
- }
+ currPath += dirs[i];
if (!DirExists(currPath))
+ {
if (!wxMkdir(currPath, perm))
- noErrors ++;
-
- if ( (i < (count-1)) )
- currPath += wxFILE_SEP_PATH;
+ {
+ // no need to try creating further directories
+ return false;
+ }
+ }
}
- return (noErrors == 0);
+ return true;
}
- else
- return ::wxMkdir( dir, perm );
+
+ return ::wxMkdir( dir, perm );
}
-bool wxFileName::Rmdir()
+bool wxFileName::Rmdir(int flags) const
{
- return wxFileName::Rmdir( GetFullPath() );
+ return wxFileName::Rmdir( GetPath(), flags );
}
-bool wxFileName::Rmdir( const wxString &dir )
+bool wxFileName::Rmdir(const wxString& dir, int flags)
{
- return ::wxRmdir( dir );
+#ifdef __WINDOWS__
+ if ( flags & wxPATH_RMDIR_RECURSIVE )
+ {
+ // SHFileOperation needs double null termination string
+ // but without separator at the end of the path
+ wxString path(dir);
+ if ( path.Last() == wxFILE_SEP_PATH )
+ path.RemoveLast();
+ path += wxT('\0');
+
+ SHFILEOPSTRUCT fileop;
+ wxZeroMemory(fileop);
+ fileop.wFunc = FO_DELETE;
+ fileop.pFrom = path.t_str();
+ fileop.fFlags = FOF_SILENT | FOF_NOCONFIRMATION;
+ #ifndef __WXWINCE__
+ // FOF_NOERRORUI is not defined in WinCE
+ fileop.fFlags |= FOF_NOERRORUI;
+ #endif
+
+ int ret = SHFileOperation(&fileop);
+ if ( ret != 0 )
+ {
+ // SHFileOperation may return non-Win32 error codes, so the error
+ // message can be incorrect
+ wxLogApiError(wxT("SHFileOperation"), ret);
+ return false;
+ }
+
+ return true;
+ }
+ else if ( flags & wxPATH_RMDIR_FULL )
+#else // !__WINDOWS__
+ if ( flags != 0 ) // wxPATH_RMDIR_FULL or wxPATH_RMDIR_RECURSIVE
+#endif // !__WINDOWS__
+ {
+#ifndef __WINDOWS__
+ if ( flags & wxPATH_RMDIR_RECURSIVE )
+ {
+ // When deleting the tree recursively, we are supposed to delete
+ // this directory itself even when it is a symlink -- but without
+ // following it. Do it here as wxRmdir() would simply follow if
+ // called for a symlink.
+ if ( wxFileName::Exists(dir, wxFILE_EXISTS_SYMLINK) )
+ {
+ return wxRemoveFile(dir);
+ }
+ }
+#endif // !__WINDOWS__
+
+ wxString path(dir);
+ if ( path.Last() != wxFILE_SEP_PATH )
+ path += wxFILE_SEP_PATH;
+
+ wxDir d(path);
+
+ if ( !d.IsOpened() )
+ return false;
+
+ wxString filename;
+
+ // First delete all subdirectories: notice that we don't follow
+ // symbolic links, potentially leading outside this directory, to avoid
+ // unpleasant surprises.
+ bool cont = d.GetFirst(&filename, wxString(),
+ wxDIR_DIRS | wxDIR_HIDDEN | wxDIR_NO_FOLLOW);
+ while ( cont )
+ {
+ wxFileName::Rmdir(path + filename, flags);
+ cont = d.GetNext(&filename);
+ }
+
+#ifndef __WINDOWS__
+ if ( flags & wxPATH_RMDIR_RECURSIVE )
+ {
+ // Delete all files too and, for the same reasons as above, don't
+ // follow symlinks which could refer to the files outside of this
+ // directory and just delete the symlinks themselves.
+ cont = d.GetFirst(&filename, wxString(),
+ wxDIR_FILES | wxDIR_HIDDEN | wxDIR_NO_FOLLOW);
+ while ( cont )
+ {
+ ::wxRemoveFile(path + filename);
+ cont = d.GetNext(&filename);
+ }
+ }
+#endif // !__WINDOWS__
+ }
+
+ return ::wxRmdir(dir);
}
// ----------------------------------------------------------------------------
// path normalization
// ----------------------------------------------------------------------------
-bool wxFileName::Normalize(wxPathNormalize flags,
+bool wxFileName::Normalize(int flags,
const wxString& cwd,
wxPathFormat format)
{
+ // deal with env vars renaming first as this may seriously change the path
+ if ( flags & wxPATH_NORM_ENV_VARS )
+ {
+ wxString pathOrig = GetFullPath(format);
+ wxString path = wxExpandEnvVars(pathOrig);
+ if ( path != pathOrig )
+ {
+ Assign(path);
+ }
+ }
+
// the existing path components
wxArrayString dirs = GetDirs();
format = GetFormat(format);
- // make the path absolute
- if ( (flags & wxPATH_NORM_ABSOLUTE) && m_relative )
+ // set up the directory to use for making the path absolute later
+ if ( (flags & wxPATH_NORM_ABSOLUTE) && !IsAbsolute(format) )
{
if ( cwd.empty() )
{
{
curDir.AssignDir(cwd);
}
-
-#if 0
- // the path may be not absolute because it doesn't have the volume name
- // but in this case we shouldn't modify the directory components of it
- // but just set the current volume
- if ( !HasVolume() && curDir.HasVolume() )
- {
- SetVolume(curDir.GetVolume());
-
- if ( IsAbsolute() )
- {
- // yes, it was the case - we don't need curDir then
- curDir.Clear();
- }
- }
-#endif
- m_relative = FALSE;
}
// handle ~ stuff under Unix only
- if ( (format == wxPATH_UNIX) && (flags & wxPATH_NORM_TILDE) )
+ if ( (format == wxPATH_UNIX) && (flags & wxPATH_NORM_TILDE) && m_relative )
{
if ( !dirs.IsEmpty() )
{
wxString dir = dirs[0u];
- if ( !dir.empty() && dir[0u] == _T('~') )
+ if ( !dir.empty() && dir[0u] == wxT('~') )
{
+ // to make the path absolute use the home directory
curDir.AssignDir(wxGetUserHome(dir.c_str() + 1));
-
dirs.RemoveAt(0u);
}
}
// transform relative path into abs one
if ( curDir.IsOk() )
{
- wxArrayString dirsNew = curDir.GetDirs();
- size_t count = dirs.GetCount();
- for ( size_t n = 0; n < count; n++ )
+ // this path may be relative because it doesn't have the volume name
+ // and still have m_relative=true; in this case we shouldn't modify
+ // our directory components but just set the current volume
+ if ( !HasVolume() && curDir.HasVolume() )
+ {
+ SetVolume(curDir.GetVolume());
+
+ if ( !m_relative )
{
- dirsNew.Add(dirs[n]);
+ // yes, it was the case - we don't need curDir then
+ curDir.Clear();
+ }
}
- dirs = dirsNew;
+ // finally, prepend curDir to the dirs array
+ wxArrayString dirsNew = curDir.GetDirs();
+ WX_PREPEND_ARRAY(dirs, dirsNew);
+
+ // if we used e.g. tilde expansion previously and wxGetUserHome didn't
+ // return for some reason an absolute path, then curDir maybe not be absolute!
+ if ( !curDir.m_relative )
+ {
+ // we have prepended an absolute path and thus we are now an absolute
+ // file name too
+ m_relative = false;
+ }
+ // else if (flags & wxPATH_NORM_ABSOLUTE):
+ // should we warn the user that we didn't manage to make the path absolute?
}
// now deal with ".", ".." and the rest
if ( dir == wxT("..") )
{
- if ( m_dirs.IsEmpty() )
+ if ( m_dirs.empty() )
{
- wxLogError(_("The path '%s' contains too many \"..\"!"),
- GetFullPath().c_str());
- return FALSE;
- }
+ // We have more ".." than directory components so far.
+ // Don't treat this as an error as the path could have been
+ // entered by user so try to handle it reasonably: if the
+ // path is absolute, just ignore the extra ".." because
+ // "/.." is the same as "/". Otherwise, i.e. for relative
+ // paths, keep ".." unchanged because removing it would
+ // modify the file a relative path refers to.
+ if ( !m_relative )
+ continue;
- m_dirs.RemoveAt(m_dirs.GetCount() - 1);
- continue;
+ }
+ else // Normal case, go one step up.
+ {
+ m_dirs.pop_back();
+ continue;
+ }
}
}
- if ( flags & wxPATH_NORM_ENV_VARS )
- {
- dir = wxExpandEnvVars(dir);
- }
+ m_dirs.Add(dir);
+ }
- if ( (flags & wxPATH_NORM_CASE) && !IsCaseSensitive(format) )
+#if defined(__WIN32__) && !defined(__WXWINCE__) && wxUSE_OLE
+ if ( (flags & wxPATH_NORM_SHORTCUT) )
+ {
+ wxString filename;
+ if (GetShortcutTarget(GetFullPath(format), filename))
{
- dir.MakeLower();
+ m_relative = false;
+ Assign(filename);
}
+ }
+#endif
- m_dirs.Add(dir);
+#if defined(__WIN32__)
+ if ( (flags & wxPATH_NORM_LONG) && (format == wxPATH_DOS) )
+ {
+ Assign(GetLongPath());
}
+#endif // Win32
+ // Change case (this should be kept at the end of the function, to ensure
+ // that the path doesn't change any more after we normalize its case)
if ( (flags & wxPATH_NORM_CASE) && !IsCaseSensitive(format) )
{
- // VZ: expand env vars here too?
-
+ m_volume.MakeLower();
m_name.MakeLower();
m_ext.MakeLower();
+
+ // directory entries must be made lower case as well
+ count = m_dirs.GetCount();
+ for ( size_t i = 0; i < count; i++ )
+ {
+ m_dirs[i].MakeLower();
+ }
}
-#if defined(__WIN32__)
- if ( (flags & wxPATH_NORM_LONG) && (format == wxPATH_DOS) )
+ return true;
+}
+
+#ifndef __WXWINCE__
+bool wxFileName::ReplaceEnvVariable(const wxString& envname,
+ const wxString& replacementFmtString,
+ wxPathFormat format)
+{
+ // look into stringForm for the contents of the given environment variable
+ wxString val;
+ if (envname.empty() ||
+ !wxGetEnv(envname, &val))
+ return false;
+ if (val.empty())
+ return false;
+
+ wxString stringForm = GetPath(wxPATH_GET_VOLUME, format);
+ // do not touch the file name and the extension
+
+ wxString replacement = wxString::Format(replacementFmtString, envname);
+ stringForm.Replace(val, replacement);
+
+ // Now assign ourselves the modified path:
+ Assign(stringForm, GetFullName(), format);
+
+ return true;
+}
+#endif
+
+bool wxFileName::ReplaceHomeDir(wxPathFormat format)
+{
+ wxString homedir = wxGetHomeDir();
+ if (homedir.empty())
+ return false;
+
+ wxString stringForm = GetPath(wxPATH_GET_VOLUME, format);
+ // do not touch the file name and the extension
+
+ stringForm.Replace(homedir, "~");
+
+ // Now assign ourselves the modified path:
+ Assign(stringForm, GetFullName(), format);
+
+ return true;
+}
+
+// ----------------------------------------------------------------------------
+// get the shortcut target
+// ----------------------------------------------------------------------------
+
+// WinCE (3) doesn't have CLSID_ShellLink, IID_IShellLink definitions.
+// The .lnk file is a plain text file so it should be easy to
+// make it work. Hint from Google Groups:
+// "If you open up a lnk file, you'll see a
+// number, followed by a pound sign (#), followed by more text. The
+// number is the number of characters that follows the pound sign. The
+// characters after the pound sign are the command line (which _can_
+// include arguments) to be executed. Any path (e.g. \windows\program
+// files\myapp.exe) that includes spaces needs to be enclosed in
+// quotation marks."
+
+#if defined(__WIN32__) && !defined(__WXWINCE__) && wxUSE_OLE
+
+bool wxFileName::GetShortcutTarget(const wxString& shortcutPath,
+ wxString& targetFilename,
+ wxString* arguments) const
+{
+ wxString path, file, ext;
+ wxFileName::SplitPath(shortcutPath, & path, & file, & ext);
+
+ HRESULT hres;
+ IShellLink* psl;
+ bool success = false;
+
+ // Assume it's not a shortcut if it doesn't end with lnk
+ if (ext.CmpNoCase(wxT("lnk"))!=0)
+ return false;
+
+ // create a ShellLink object
+ hres = CoCreateInstance(CLSID_ShellLink, NULL, CLSCTX_INPROC_SERVER,
+ IID_IShellLink, (LPVOID*) &psl);
+
+ if (SUCCEEDED(hres))
{
- Assign(GetLongPath());
+ IPersistFile* ppf;
+ hres = psl->QueryInterface( IID_IPersistFile, (LPVOID *) &ppf);
+ if (SUCCEEDED(hres))
+ {
+ WCHAR wsz[MAX_PATH];
+
+ MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, shortcutPath.mb_str(), -1, wsz,
+ MAX_PATH);
+
+ hres = ppf->Load(wsz, 0);
+ ppf->Release();
+
+ if (SUCCEEDED(hres))
+ {
+ wxChar buf[2048];
+ // Wrong prototype in early versions
+#if defined(__MINGW32__) && !wxCHECK_W32API_VERSION(2, 2)
+ psl->GetPath((CHAR*) buf, 2048, NULL, SLGP_UNCPRIORITY);
+#else
+ psl->GetPath(buf, 2048, NULL, SLGP_UNCPRIORITY);
+#endif
+ targetFilename = wxString(buf);
+ success = (shortcutPath != targetFilename);
+
+ psl->GetArguments(buf, 2048);
+ wxString args(buf);
+ if (!args.empty() && arguments)
+ {
+ *arguments = args;
+ }
+ }
+ }
+
+ psl->Release();
+ }
+ return success;
+}
+
+#endif // __WIN32__ && !__WXWINCE__
+
+
+// ----------------------------------------------------------------------------
+// absolute/relative paths
+// ----------------------------------------------------------------------------
+
+bool wxFileName::IsAbsolute(wxPathFormat format) const
+{
+ // unix paths beginning with ~ are reported as being absolute
+ if ( format == wxPATH_UNIX )
+ {
+ if ( !m_dirs.IsEmpty() )
+ {
+ wxString dir = m_dirs[0u];
+
+ if (!dir.empty() && dir[0u] == wxT('~'))
+ return true;
+ }
}
-#endif // Win32
- return TRUE;
+ // if our path doesn't start with a path separator, it's not an absolute
+ // path
+ if ( m_relative )
+ return false;
+
+ if ( !GetVolumeSeparator(format).empty() )
+ {
+ // this format has volumes and an absolute path must have one, it's not
+ // enough to have the full path to be an absolute file under Windows
+ if ( GetVolume().empty() )
+ return false;
+ }
+
+ return true;
}
bool wxFileName::MakeRelativeTo(const wxString& pathBase, wxPathFormat format)
{
- wxFileName fnBase(pathBase, format);
+ wxFileName fnBase = wxFileName::DirName(pathBase, format);
// get cwd only once - small time saving
wxString cwd = wxGetCwd();
- Normalize(wxPATH_NORM_ALL, cwd, format);
- fnBase.Normalize(wxPATH_NORM_ALL, cwd, format);
+ Normalize(wxPATH_NORM_ALL & ~wxPATH_NORM_CASE, cwd, format);
+ fnBase.Normalize(wxPATH_NORM_ALL & ~wxPATH_NORM_CASE, cwd, format);
bool withCase = IsCaseSensitive(format);
if ( !GetVolume().IsSameAs(fnBase.GetVolume(), withCase) )
{
// nothing done
- return FALSE;
+ return false;
}
// same drive, so we don't need our volume
m_dirs.Insert(wxT(".."), 0u);
}
- m_relative = TRUE;
+ if ( format == wxPATH_UNIX || format == wxPATH_DOS )
+ {
+ // a directory made relative with respect to itself is '.' under Unix
+ // and DOS, by definition (but we don't have to insert "./" for the
+ // files)
+ if ( m_dirs.IsEmpty() && IsDir() )
+ {
+ m_dirs.Add(wxT('.'));
+ }
+ }
+
+ m_relative = true;
// we were modified
- return TRUE;
+ return true;
}
// ----------------------------------------------------------------------------
// filename kind tests
// ----------------------------------------------------------------------------
-bool wxFileName::SameAs(const wxFileName &filepath, wxPathFormat format)
+bool wxFileName::SameAs(const wxFileName& filepath, wxPathFormat format) const
{
wxFileName fn1 = *this,
fn2 = filepath;
// get cwd only once - small time saving
wxString cwd = wxGetCwd();
- fn1.Normalize(wxPATH_NORM_ALL, cwd, format);
- fn2.Normalize(wxPATH_NORM_ALL, cwd, format);
+ fn1.Normalize(wxPATH_NORM_ALL | wxPATH_NORM_CASE, cwd, format);
+ fn2.Normalize(wxPATH_NORM_ALL | wxPATH_NORM_CASE, cwd, format);
if ( fn1.GetFullPath() == fn2.GetFullPath() )
- return TRUE;
+ return true;
- // TODO: compare inodes for Unix, this works even when filenames are
- // different but files are the same (symlinks) (VZ)
+#if defined(__UNIX__)
+ wxStructStat st1, st2;
+ if ( StatAny(st1, fn1) && StatAny(st2, fn2) )
+ {
+ if ( st1.st_ino == st2.st_ino && st1.st_dev == st2.st_dev )
+ return true;
+ }
+ //else: It's not an error if one or both files don't exist.
+#endif // defined __UNIX__
- return FALSE;
+ return false;
}
/* static */
bool wxFileName::IsCaseSensitive( wxPathFormat format )
{
- // only Unix filenames are truely case-sensitive
+ // only Unix filenames are truly case-sensitive
return GetFormat(format) == wxPATH_UNIX;
}
/* static */
-wxString wxFileName::GetVolumeSeparator(wxPathFormat format)
+wxString wxFileName::GetForbiddenChars(wxPathFormat format)
+{
+ // Inits to forbidden characters that are common to (almost) all platforms.
+ wxString strForbiddenChars = wxT("*?");
+
+ // If asserts, wxPathFormat has been changed. In case of a new path format
+ // addition, the following code might have to be updated.
+ wxCOMPILE_TIME_ASSERT(wxPATH_MAX == 5, wxPathFormatChanged);
+ switch ( GetFormat(format) )
+ {
+ default :
+ wxFAIL_MSG( wxT("Unknown path format") );
+ // !! Fall through !!
+
+ case wxPATH_UNIX:
+ break;
+
+ case wxPATH_MAC:
+ // On a Mac even names with * and ? are allowed (Tested with OS
+ // 9.2.1 and OS X 10.2.5)
+ strForbiddenChars.clear();
+ break;
+
+ case wxPATH_DOS:
+ strForbiddenChars += wxT("\\/:\"<>|");
+ break;
+
+ case wxPATH_VMS:
+ break;
+ }
+
+ return strForbiddenChars;
+}
+
+/* static */
+wxString wxFileName::GetVolumeSeparator(wxPathFormat WXUNUSED_IN_WINCE(format))
{
+#ifdef __WXWINCE__
+ return wxEmptyString;
+#else
wxString sepVol;
if ( (GetFormat(format) == wxPATH_DOS) ||
//else: leave empty
return sepVol;
+#endif
}
/* static */
break;
default:
- wxFAIL_MSG( _T("unknown wxPATH_XXX style") );
+ wxFAIL_MSG( wxT("Unknown wxPATH_XXX style") );
// fall through
case wxPATH_UNIX:
return seps;
}
+/* static */
+wxString wxFileName::GetPathTerminators(wxPathFormat format)
+{
+ format = GetFormat(format);
+
+ // under VMS the end of the path is ']', not the path separator used to
+ // separate the components
+ return format == wxPATH_VMS ? wxString(wxT(']')) : GetPathSeparators(format);
+}
+
/* static */
bool wxFileName::IsPathSeparator(wxChar ch, wxPathFormat format)
{
// wxString::Find() doesn't work as expected with NUL - it will always find
- // it, so it is almost surely a bug if this function is called with NUL arg
- wxASSERT_MSG( ch != _T('\0'), _T("shouldn't be called with NUL") );
-
- return GetPathSeparators(format).Find(ch) != wxNOT_FOUND;
+ // it, so test for it separately
+ return ch != wxT('\0') && GetPathSeparators(format).Find(ch) != wxNOT_FOUND;
}
-bool wxFileName::IsWild( wxPathFormat format )
+/* static */
+bool
+wxFileName::IsMSWUniqueVolumeNamePath(const wxString& path, wxPathFormat format)
{
- // FIXME: this is probably false for Mac and this is surely wrong for most
- // of Unix shells (think about "[...]")
- (void)format;
- return m_name.find_first_of(_T("*?")) != wxString::npos;
+ // return true if the format used is the DOS/Windows one and the string begins
+ // with a Windows unique volume name ("\\?\Volume{guid}\")
+ return format == wxPATH_DOS &&
+ path.length() >= wxMSWUniqueVolumePrefixLength &&
+ path.StartsWith(wxS("\\\\?\\Volume{")) &&
+ path[wxMSWUniqueVolumePrefixLength - 1] == wxFILE_SEP_PATH_DOS;
}
// ----------------------------------------------------------------------------
// path components manipulation
// ----------------------------------------------------------------------------
-void wxFileName::AppendDir( const wxString &dir )
+/* static */ bool wxFileName::IsValidDirComponent(const wxString& dir)
+{
+ if ( dir.empty() )
+ {
+ wxFAIL_MSG( wxT("empty directory passed to wxFileName::InsertDir()") );
+
+ return false;
+ }
+
+ const size_t len = dir.length();
+ for ( size_t n = 0; n < len; n++ )
+ {
+ if ( dir[n] == GetVolumeSeparator() || IsPathSeparator(dir[n]) )
+ {
+ wxFAIL_MSG( wxT("invalid directory component in wxFileName") );
+
+ return false;
+ }
+ }
+
+ return true;
+}
+
+bool wxFileName::AppendDir( const wxString& dir )
{
- m_dirs.Add( dir );
+ if (!IsValidDirComponent(dir))
+ return false;
+ m_dirs.Add(dir);
+ return true;
}
-void wxFileName::PrependDir( const wxString &dir )
+void wxFileName::PrependDir( const wxString& dir )
{
- m_dirs.Insert( dir, 0 );
+ InsertDir(0, dir);
}
-void wxFileName::InsertDir( int before, const wxString &dir )
+bool wxFileName::InsertDir(size_t before, const wxString& dir)
{
- m_dirs.Insert( dir, before );
+ if (!IsValidDirComponent(dir))
+ return false;
+ m_dirs.Insert(dir, before);
+ return true;
}
-void wxFileName::RemoveDir( int pos )
+void wxFileName::RemoveDir(size_t pos)
{
- m_dirs.Remove( (size_t)pos );
+ m_dirs.RemoveAt(pos);
}
// ----------------------------------------------------------------------------
void wxFileName::SetFullName(const wxString& fullname)
{
- SplitPath(fullname, NULL /* no path */, &m_name, &m_ext);
+ SplitPath(fullname, NULL /* no volume */, NULL /* no path */,
+ &m_name, &m_ext, &m_hasExt);
}
wxString wxFileName::GetFullName() const
{
wxString fullname = m_name;
- if ( !m_ext.empty() )
+ if ( m_hasExt )
{
fullname << wxFILE_SEP_EXT << m_ext;
}
return fullname;
}
-wxString wxFileName::GetPath( bool add_separator, wxPathFormat format ) const
+wxString wxFileName::GetPath( int flags, wxPathFormat format ) const
{
format = GetFormat( format );
wxString fullpath;
- // the leading character
- if ( format == wxPATH_MAC && m_relative )
- {
- fullpath += wxFILE_SEP_PATH_MAC;
- }
- else if ( format == wxPATH_DOS )
- {
- if (!m_relative)
- fullpath += wxFILE_SEP_PATH_DOS;
- }
- else if ( format == wxPATH_UNIX )
+ // return the volume with the path as well if requested
+ if ( flags & wxPATH_GET_VOLUME )
{
- if (!m_relative)
- fullpath += wxFILE_SEP_PATH_UNIX;
+ fullpath += wxGetVolumeString(GetVolume(), format);
}
- // then concatenate all the path components using the path separator
- size_t dirCount = m_dirs.GetCount();
- if ( dirCount )
+ // the leading character
+ switch ( format )
{
- if ( format == wxPATH_VMS )
- {
- fullpath += wxT('[');
- }
+ case wxPATH_MAC:
+ if ( m_relative )
+ fullpath += wxFILE_SEP_PATH_MAC;
+ break;
+ case wxPATH_DOS:
+ if ( !m_relative )
+ fullpath += wxFILE_SEP_PATH_DOS;
+ break;
- for ( size_t i = 0; i < dirCount; i++ )
- {
- // TODO: What to do with ".." under VMS
+ default:
+ wxFAIL_MSG( wxT("Unknown path format") );
+ // fall through
- switch (format)
+ case wxPATH_UNIX:
+ if ( !m_relative )
{
- case wxPATH_MAC:
- {
- if (m_dirs[i] == wxT("."))
- break;
- if (m_dirs[i] != wxT("..")) // convert back from ".." to nothing
- fullpath += m_dirs[i];
- fullpath += wxT(':');
- break;
- }
- case wxPATH_DOS:
- {
- fullpath += m_dirs[i];
- fullpath += wxT('\\');
- break;
- }
- case wxPATH_UNIX:
- {
- fullpath += m_dirs[i];
- fullpath += wxT('/');
- break;
- }
- case wxPATH_VMS:
- {
- if (m_dirs[i] != wxT("..")) // convert back from ".." to nothing
- fullpath += m_dirs[i];
- if (i == dirCount-1)
- fullpath += wxT(']');
- else
- fullpath += wxT('.');
- break;
- }
- default:
- {
- wxFAIL_MSG( wxT("error") );
- }
+ fullpath += wxFILE_SEP_PATH_UNIX;
}
- }
- }
-
-
-
- return fullpath;
-}
-
-wxString wxFileName::GetFullPath( wxPathFormat format ) const
-{
- format = GetFormat(format);
-
- wxString fullpath;
+ break;
- // first put the volume
- if ( !m_volume.empty() )
- {
- {
- // Special Windows UNC paths hack, part 2: undo what we did in
- // SplitPath() and make an UNC path if we have a drive which is not a
- // single letter (hopefully the network shares can't be one letter only
- // although I didn't find any authoritative docs on this)
- if ( format == wxPATH_DOS && m_volume.length() > 1 )
- {
- fullpath << wxFILE_SEP_PATH_DOS << wxFILE_SEP_PATH_DOS << m_volume;
- }
- else if ( format == wxPATH_DOS || format == wxPATH_VMS )
- {
- fullpath << m_volume << GetVolumeSeparator(format);
- }
- // else ignore
- }
+ case wxPATH_VMS:
+ // no leading character here but use this place to unset
+ // wxPATH_GET_SEPARATOR flag: under VMS it doesn't make sense
+ // as, if I understand correctly, there should never be a dot
+ // before the closing bracket
+ flags &= ~wxPATH_GET_SEPARATOR;
}
- // the leading character
- if ( format == wxPATH_MAC && m_relative )
- {
- fullpath += wxFILE_SEP_PATH_MAC;
- }
- else if ( format == wxPATH_DOS )
+ if ( m_dirs.empty() )
{
- if (!m_relative)
- fullpath += wxFILE_SEP_PATH_DOS;
+ // there is nothing more
+ return fullpath;
}
- else if ( format == wxPATH_UNIX )
+
+ // then concatenate all the path components using the path separator
+ if ( format == wxPATH_VMS )
{
- if (!m_relative)
- fullpath += wxFILE_SEP_PATH_UNIX;
+ fullpath += wxT('[');
}
- // then concatenate all the path components using the path separator
- size_t dirCount = m_dirs.GetCount();
- if ( dirCount )
+ const size_t dirCount = m_dirs.GetCount();
+ for ( size_t i = 0; i < dirCount; i++ )
{
- if ( format == wxPATH_VMS )
+ switch (format)
{
- fullpath += wxT('[');
- }
+ case wxPATH_MAC:
+ if ( m_dirs[i] == wxT(".") )
+ {
+ // skip appending ':', this shouldn't be done in this
+ // case as "::" is interpreted as ".." under Unix
+ continue;
+ }
+ // convert back from ".." to nothing
+ if ( !m_dirs[i].IsSameAs(wxT("..")) )
+ fullpath += m_dirs[i];
+ break;
- for ( size_t i = 0; i < dirCount; i++ )
- {
- // TODO: What to do with ".." under VMS
+ default:
+ wxFAIL_MSG( wxT("Unexpected path format") );
+ // still fall through
- switch (format)
- {
- case wxPATH_MAC:
- {
- if (m_dirs[i] == wxT("."))
- break;
- if (m_dirs[i] != wxT("..")) // convert back from ".." to nothing
- fullpath += m_dirs[i];
- fullpath += wxT(':');
- break;
- }
- case wxPATH_DOS:
- {
- fullpath += m_dirs[i];
- fullpath += wxT('\\');
- break;
- }
- case wxPATH_UNIX:
- {
+ case wxPATH_DOS:
+ case wxPATH_UNIX:
+ fullpath += m_dirs[i];
+ break;
+
+ case wxPATH_VMS:
+ // TODO: What to do with ".." under VMS
+
+ // convert back from ".." to nothing
+ if ( !m_dirs[i].IsSameAs(wxT("..")) )
fullpath += m_dirs[i];
- fullpath += wxT('/');
- break;
- }
- case wxPATH_VMS:
- {
- if (m_dirs[i] != wxT("..")) // convert back from ".." to nothing
- fullpath += m_dirs[i];
- if (i == dirCount-1)
- fullpath += wxT(']');
- else
- fullpath += wxT('.');
- break;
- }
- default:
- {
- wxFAIL_MSG( wxT("error") );
- }
- }
+ break;
}
+
+ if ( (flags & wxPATH_GET_SEPARATOR) || (i != dirCount - 1) )
+ fullpath += GetPathSeparator(format);
+ }
+
+ if ( format == wxPATH_VMS )
+ {
+ fullpath += wxT(']');
}
- // finally add the file name and extension
+ return fullpath;
+}
+
+wxString wxFileName::GetFullPath( wxPathFormat format ) const
+{
+ // we already have a function to get the path
+ wxString fullpath = GetPath(wxPATH_GET_VOLUME | wxPATH_GET_SEPARATOR,
+ format);
+
+ // now just add the file name and extension to it
fullpath += GetFullName();
return fullpath;
// Return the short form of the path (returns identity on non-Windows platforms)
wxString wxFileName::GetShortPath() const
{
-#if defined(__WXMSW__) && defined(__WIN32__) && !defined(__WXMICROWIN__)
wxString path(GetFullPath());
- wxString pathOut;
- DWORD sz = ::GetShortPathName(path, NULL, 0);
- bool ok = sz != 0;
- if ( ok )
+
+#if defined(__WINDOWS__) && defined(__WIN32__) && !defined(__WXMICROWIN__) && !defined(__WXWINCE__)
+ DWORD sz = ::GetShortPathName(path.t_str(), NULL, 0);
+ if ( sz != 0 )
{
- ok = ::GetShortPathName
+ wxString pathOut;
+ if ( ::GetShortPathName
(
- path,
- pathOut.GetWriteBuf(sz),
+ path.t_str(),
+ wxStringBuffer(pathOut, sz),
sz
- ) != 0;
- pathOut.UngetWriteBuf();
+ ) != 0 )
+ {
+ return pathOut;
+ }
}
- if (ok)
- return pathOut;
+#endif // Windows
return path;
-#else
- return GetFullPath();
-#endif
}
// Return the long form of the path (returns identity on non-Windows platforms)
wxString pathOut,
path = GetFullPath();
-#if defined(__WIN32__) && !defined(__WXMICROWIN__)
- bool success = FALSE;
-
- // VZ: this code was disabled, why?
-#if 0 // wxUSE_DYNAMIC_LOADER
- typedef DWORD (*GET_LONG_PATH_NAME)(const wxChar *, wxChar *, DWORD);
+#if defined(__WIN32__) && !defined(__WXWINCE__) && !defined(__WXMICROWIN__)
- static bool s_triedToLoad = FALSE;
+#if wxUSE_DYNLIB_CLASS
+ typedef DWORD (WINAPI *GET_LONG_PATH_NAME)(const wxChar *, wxChar *, DWORD);
- if ( !s_triedToLoad )
+ // this is MT-safe as in the worst case we're going to resolve the function
+ // twice -- but as the result is the same in both threads, it's ok
+ static GET_LONG_PATH_NAME s_pfnGetLongPathName = NULL;
+ if ( !s_pfnGetLongPathName )
{
- s_triedToLoad = TRUE;
- wxDynamicLibrary dllKernel(_T("kernel32"));
- if ( dllKernel.IsLoaded() )
+ static bool s_triedToLoad = false;
+
+ if ( !s_triedToLoad )
{
- // may succeed or fail depending on the Windows version
- static GET_LONG_PATH_NAME s_pfnGetLongPathName = NULL;
-#ifdef _UNICODE
- s_pfnGetLongPathName = (GET_LONG_PATH_NAME) dllKernel.GetSymbol(_T("GetLongPathNameW"));
-#else
- s_pfnGetLongPathName = (GET_LONG_PATH_NAME) dllKernel.GetSymbol(_T("GetLongPathNameA"));
-#endif
+ s_triedToLoad = true;
- if ( s_pfnGetLongPathName )
- {
- DWORD dwSize = (*s_pfnGetLongPathName)(path, NULL, 0);
- bool ok = dwSize > 0;
+ wxDynamicLibrary dllKernel(wxT("kernel32"));
- if ( ok )
- {
- DWORD sz = (*s_pfnGetLongPathName)(path, NULL, 0);
- ok = sz != 0;
- if ( ok )
- {
- ok = (*s_pfnGetLongPathName)
- (
- path,
- pathOut.GetWriteBuf(sz),
- sz
- ) != 0;
- pathOut.UngetWriteBuf();
-
- success = TRUE;
- }
- }
+ const wxChar* GetLongPathName = wxT("GetLongPathName")
+#if wxUSE_UNICODE
+ wxT("W");
+#else // ANSI
+ wxT("A");
+#endif // Unicode/ANSI
+
+ if ( dllKernel.HasSymbol(GetLongPathName) )
+ {
+ s_pfnGetLongPathName = (GET_LONG_PATH_NAME)
+ dllKernel.GetSymbol(GetLongPathName);
}
+
+ // note that kernel32.dll can be unloaded, it stays in memory
+ // anyhow as all Win32 programs link to it and so it's safe to call
+ // GetLongPathName() even after unloading it
}
}
- if (success)
- return pathOut;
-#endif // wxUSE_DYNAMIC_LOADER
- if (!success)
+ if ( s_pfnGetLongPathName )
{
- // The OS didn't support GetLongPathName, or some other error.
- // We need to call FindFirstFile on each component in turn.
+ DWORD dwSize = (*s_pfnGetLongPathName)(path.t_str(), NULL, 0);
+ if ( dwSize > 0 )
+ {
+ if ( (*s_pfnGetLongPathName)
+ (
+ path.t_str(),
+ wxStringBuffer(pathOut, dwSize),
+ dwSize
+ ) != 0 )
+ {
+ return pathOut;
+ }
+ }
+ }
+#endif // wxUSE_DYNLIB_CLASS
- WIN32_FIND_DATA findFileData;
- HANDLE hFind;
- pathOut = wxEmptyString;
+ // The OS didn't support GetLongPathName, or some other error.
+ // We need to call FindFirstFile on each component in turn.
- wxArrayString dirs = GetDirs();
- dirs.Add(GetFullName());
+ WIN32_FIND_DATA findFileData;
+ HANDLE hFind;
- wxString tmpPath;
+ if ( HasVolume() )
+ pathOut = GetVolume() +
+ GetVolumeSeparator(wxPATH_DOS) +
+ GetPathSeparator(wxPATH_DOS);
+ else
+ pathOut.clear();
- size_t count = dirs.GetCount();
- for ( size_t i = 0; i < count; i++ )
- {
- // We're using pathOut to collect the long-name path, but using a
- // temporary for appending the last path component which may be
- // short-name
- tmpPath = pathOut + dirs[i];
+ wxArrayString dirs = GetDirs();
+ dirs.Add(GetFullName());
- if ( tmpPath.empty() )
- continue;
+ wxString tmpPath;
- if ( tmpPath.Last() == wxT(':') )
- {
- // Can't pass a drive and root dir to FindFirstFile,
- // so continue to next dir
- tmpPath += wxFILE_SEP_PATH;
- pathOut = tmpPath;
- continue;
- }
+ size_t count = dirs.GetCount();
+ for ( size_t i = 0; i < count; i++ )
+ {
+ const wxString& dir = dirs[i];
- hFind = ::FindFirstFile(tmpPath, &findFileData);
- if (hFind == INVALID_HANDLE_VALUE)
- {
- // Error: return immediately with the original path
- return path;
- }
+ // We're using pathOut to collect the long-name path, but using a
+ // temporary for appending the last path component which may be
+ // short-name
+ tmpPath = pathOut + dir;
+
+ // We must not process "." or ".." here as they would be (unexpectedly)
+ // replaced by the corresponding directory names so just leave them
+ // alone
+ //
+ // And we can't pass a drive and root dir to FindFirstFile (VZ: why?)
+ if ( tmpPath.empty() || dir == '.' || dir == ".." ||
+ tmpPath.Last() == GetVolumeSeparator(wxPATH_DOS) )
+ {
+ tmpPath += wxFILE_SEP_PATH;
+ pathOut = tmpPath;
+ continue;
+ }
- pathOut += findFileData.cFileName;
- if ( (i < (count-1)) )
- pathOut += wxFILE_SEP_PATH;
+ hFind = ::FindFirstFile(tmpPath.t_str(), &findFileData);
+ if (hFind == INVALID_HANDLE_VALUE)
+ {
+ // Error: most likely reason is that path doesn't exist, so
+ // append any unprocessed parts and return
+ for ( i += 1; i < count; i++ )
+ tmpPath += wxFILE_SEP_PATH + dirs[i];
- ::FindClose(hFind);
+ return tmpPath;
}
+
+ pathOut += findFileData.cFileName;
+ if ( (i < (count-1)) )
+ pathOut += wxFILE_SEP_PATH;
+
+ ::FindClose(hFind);
}
#else // !Win32
pathOut = path;
{
if (format == wxPATH_NATIVE)
{
-#if defined(__WXMSW__) || defined(__WXPM__) || defined(__DOS__)
+#if defined(__WINDOWS__) || defined(__OS2__) || defined(__DOS__)
format = wxPATH_DOS;
-#elif defined(__WXMAC__) && !defined(__DARWIN__)
- format = wxPATH_MAC;
#elif defined(__VMS)
format = wxPATH_VMS;
#else
return format;
}
+#ifdef wxHAS_FILESYSTEM_VOLUMES
+
+/* static */
+wxString wxFileName::GetVolumeString(char drive, int flags)
+{
+ wxASSERT_MSG( !(flags & ~wxPATH_GET_SEPARATOR), "invalid flag specified" );
+
+ wxString vol(drive);
+ vol += wxFILE_SEP_DSK;
+ if ( flags & wxPATH_GET_SEPARATOR )
+ vol += wxFILE_SEP_PATH;
+
+ return vol;
+}
+
+#endif // wxHAS_FILESYSTEM_VOLUMES
+
// ----------------------------------------------------------------------------
// path splitting function
// ----------------------------------------------------------------------------
/* static */
-void wxFileName::SplitPath(const wxString& fullpathWithVolume,
- wxString *pstrVolume,
- wxString *pstrPath,
- wxString *pstrName,
- wxString *pstrExt,
- wxPathFormat format)
+void
+wxFileName::SplitVolume(const wxString& fullpathWithVolume,
+ wxString *pstrVolume,
+ wxString *pstrPath,
+ wxPathFormat format)
{
format = GetFormat(format);
wxString fullpath = fullpathWithVolume;
- // under VMS the end of the path is ']', not the path separator used to
- // separate the components
- wxString sepPath = format == wxPATH_VMS ? wxString(_T(']'))
- : GetPathSeparators(format);
+ if ( IsMSWUniqueVolumeNamePath(fullpath, format) )
+ {
+ // special Windows unique volume names hack: transform
+ // \\?\Volume{guid}\path into Volume{guid}:path
+ // note: this check must be done before the check for UNC path
- // special Windows UNC paths hack: transform \\share\path into share:path
- if ( format == wxPATH_DOS )
+ // we know the last backslash from the unique volume name is located
+ // there from IsMSWUniqueVolumeNamePath
+ fullpath[wxMSWUniqueVolumePrefixLength - 1] = wxFILE_SEP_DSK;
+
+ // paths starting with a unique volume name should always be absolute
+ fullpath.insert(wxMSWUniqueVolumePrefixLength, 1, wxFILE_SEP_PATH_DOS);
+
+ // remove the leading "\\?\" part
+ fullpath.erase(0, 4);
+ }
+ else if ( IsUNCPath(fullpath, format) )
{
- if ( fullpath.length() >= 4 &&
- fullpath[0u] == wxFILE_SEP_PATH_DOS &&
- fullpath[1u] == wxFILE_SEP_PATH_DOS )
- {
- fullpath.erase(0, 2);
+ // special Windows UNC paths hack: transform \\share\path into share:path
- size_t posFirstSlash = fullpath.find_first_of(sepPath);
- if ( posFirstSlash != wxString::npos )
- {
- fullpath[posFirstSlash] = wxFILE_SEP_DSK;
+ fullpath.erase(0, 2);
- // UNC paths are always absolute, right? (FIXME)
- fullpath.insert(posFirstSlash + 1, wxFILE_SEP_PATH_DOS);
- }
+ size_t posFirstSlash =
+ fullpath.find_first_of(GetPathTerminators(format));
+ if ( posFirstSlash != wxString::npos )
+ {
+ fullpath[posFirstSlash] = wxFILE_SEP_DSK;
+
+ // UNC paths are always absolute, right? (FIXME)
+ fullpath.insert(posFirstSlash + 1, 1, wxFILE_SEP_PATH_DOS);
}
}
{
wxString sepVol = GetVolumeSeparator(format);
+ // we have to exclude the case of a colon in the very beginning of the
+ // string as it can't be a volume separator (nor can this be a valid
+ // DOS file name at all but we'll leave dealing with this to our caller)
size_t posFirstColon = fullpath.find_first_of(sepVol);
- if ( posFirstColon != wxString::npos )
+ if ( posFirstColon && posFirstColon != wxString::npos )
{
if ( pstrVolume )
{
}
}
+ if ( pstrPath )
+ *pstrPath = fullpath;
+}
+
+/* static */
+void wxFileName::SplitPath(const wxString& fullpathWithVolume,
+ wxString *pstrVolume,
+ wxString *pstrPath,
+ wxString *pstrName,
+ wxString *pstrExt,
+ bool *hasExt,
+ wxPathFormat format)
+{
+ format = GetFormat(format);
+
+ wxString fullpath;
+ SplitVolume(fullpathWithVolume, pstrVolume, &fullpath, format);
+
// find the positions of the last dot and last path separator in the path
size_t posLastDot = fullpath.find_last_of(wxFILE_SEP_EXT);
- size_t posLastSlash = fullpath.find_last_of(sepPath);
+ size_t posLastSlash = fullpath.find_last_of(GetPathTerminators(format));
+ // check whether this dot occurs at the very beginning of a path component
if ( (posLastDot != wxString::npos) &&
- ((format == wxPATH_UNIX) || (format == wxPATH_VMS)) )
+ (posLastDot == 0 ||
+ IsPathSeparator(fullpath[posLastDot - 1]) ||
+ (format == wxPATH_VMS && fullpath[posLastDot - 1] == wxT(']'))) )
{
- if ( (posLastDot == 0) ||
- (fullpath[posLastDot - 1] == sepPath[0u] ) )
- {
- // under Unix and VMS, dot may be (and commonly is) the first
- // character of the filename, don't treat the entire filename as
- // extension in this case
- posLastDot = wxString::npos;
- }
+ // dot may be (and commonly -- at least under Unix -- is) the first
+ // character of the filename, don't treat the entire filename as
+ // extension in this case
+ posLastDot = wxString::npos;
}
// if we do have a dot and a slash, check that the dot is in the name part
// the path equal to something like '/', not empty, for the files
// immediately under root directory
size_t len = posLastSlash;
- if ( !len )
+
+ // this rule does not apply to mac since we do not start with colons (sep)
+ // except for relative paths
+ if ( !len && format != wxPATH_MAC)
len++;
*pstrPath = fullpath.Left(len);
// special VMS hack: remove the initial bracket
if ( format == wxPATH_VMS )
{
- if ( (*pstrPath)[0u] == _T('[') )
+ if ( (*pstrPath)[0u] == wxT('[') )
pstrPath->erase(0, 1);
}
}
*pstrName = fullpath.Mid(nStart, count);
}
- if ( pstrExt )
+ // finally deal with the extension here: we have an added complication that
+ // extension may be empty (but present) as in "foo." where trailing dot
+ // indicates the empty extension at the end -- and hence we must remember
+ // that we have it independently of pstrExt
+ if ( posLastDot == wxString::npos )
{
- if ( posLastDot == wxString::npos )
- {
- // no extension
- pstrExt->Empty();
- }
- else
- {
- // take everything after the dot
+ // no extension
+ if ( pstrExt )
+ pstrExt->clear();
+ if ( hasExt )
+ *hasExt = false;
+ }
+ else
+ {
+ // take everything after the dot
+ if ( pstrExt )
*pstrExt = fullpath.Mid(posLastDot + 1);
- }
+ if ( hasExt )
+ *hasExt = true;
}
}
wxString volume;
SplitPath(fullpath, &volume, path, name, ext, format);
- if ( path && !volume.empty() )
+ if ( path )
{
- path->Prepend(volume + GetVolumeSeparator(format));
+ path->Prepend(wxGetVolumeString(volume, format));
}
}
+/* static */
+wxString wxFileName::StripExtension(const wxString& fullpath)
+{
+ wxFileName fn(fullpath);
+ fn.SetExt("");
+ return fn.GetFullPath();
+}
+
// ----------------------------------------------------------------------------
// time functions
// ----------------------------------------------------------------------------
-bool wxFileName::SetTimes(const wxDateTime *dtCreate,
- const wxDateTime *dtAccess,
- const wxDateTime *dtMod)
+#if wxUSE_DATETIME
+
+bool wxFileName::SetTimes(const wxDateTime *dtAccess,
+ const wxDateTime *dtMod,
+ const wxDateTime *dtCreate) const
{
-#if defined(__UNIX_LIKE__) || (defined(__DOS__) && defined(__WATCOMC__))
- if ( !dtAccess && !dtMod )
+#if defined(__WIN32__)
+ FILETIME ftAccess, ftCreate, ftWrite;
+
+ if ( dtCreate )
+ ConvertWxToFileTime(&ftCreate, *dtCreate);
+ if ( dtAccess )
+ ConvertWxToFileTime(&ftAccess, *dtAccess);
+ if ( dtMod )
+ ConvertWxToFileTime(&ftWrite, *dtMod);
+
+ wxString path;
+ int flags;
+ if ( IsDir() )
{
- // can't modify the creation time anyhow, don't try
- return TRUE;
- }
+ if ( wxGetOsVersion() == wxOS_WINDOWS_9X )
+ {
+ wxLogError(_("Setting directory access times is not supported "
+ "under this OS version"));
+ return false;
+ }
- // if dtAccess or dtMod is not specified, use the other one (which must be
- // non NULL because of the test above) for both times
- utimbuf utm;
- utm.actime = dtAccess ? dtAccess->GetTicks() : dtMod->GetTicks();
- utm.modtime = dtMod ? dtMod->GetTicks() : dtAccess->GetTicks();
- if ( utime(GetFullPath(), &utm) == 0 )
+ path = GetPath();
+ flags = FILE_FLAG_BACKUP_SEMANTICS;
+ }
+ else // file
{
- return TRUE;
+ path = GetFullPath();
+ flags = 0;
}
-#elif defined(__WIN32__)
- wxFileHandle fh(GetFullPath());
+
+ wxFileHandle fh(path, wxFileHandle::WriteAttr, flags);
if ( fh.IsOk() )
{
- FILETIME ftAccess, ftCreate, ftWrite;
-
- if ( dtCreate )
- ConvertWxToFileTime(&ftCreate, *dtCreate);
- if ( dtAccess )
- ConvertWxToFileTime(&ftAccess, *dtAccess);
- if ( dtMod )
- ConvertWxToFileTime(&ftWrite, *dtMod);
-
if ( ::SetFileTime(fh,
dtCreate ? &ftCreate : NULL,
dtAccess ? &ftAccess : NULL,
dtMod ? &ftWrite : NULL) )
{
- return TRUE;
+ return true;
}
}
+#elif defined(__UNIX_LIKE__) || (defined(__DOS__) && defined(__WATCOMC__))
+ wxUnusedVar(dtCreate);
+
+ if ( !dtAccess && !dtMod )
+ {
+ // can't modify the creation time anyhow, don't try
+ return true;
+ }
+
+ // if dtAccess or dtMod is not specified, use the other one (which must be
+ // non NULL because of the test above) for both times
+ utimbuf utm;
+ utm.actime = dtAccess ? dtAccess->GetTicks() : dtMod->GetTicks();
+ utm.modtime = dtMod ? dtMod->GetTicks() : dtAccess->GetTicks();
+ if ( utime(GetFullPath().fn_str(), &utm) == 0 )
+ {
+ return true;
+ }
#else // other platform
+ wxUnusedVar(dtAccess);
+ wxUnusedVar(dtMod);
+ wxUnusedVar(dtCreate);
#endif // platforms
wxLogSysError(_("Failed to modify file times for '%s'"),
GetFullPath().c_str());
- return FALSE;
+ return false;
}
-bool wxFileName::Touch()
+bool wxFileName::Touch() const
{
#if defined(__UNIX_LIKE__)
// under Unix touching file is simple: just pass NULL to utime()
- if ( utime(GetFullPath(), NULL) == 0 )
+ if ( utime(GetFullPath().fn_str(), NULL) == 0 )
{
- return TRUE;
+ return true;
}
wxLogSysError(_("Failed to touch the file '%s'"), GetFullPath().c_str());
- return FALSE;
+ return false;
#else // other platform
wxDateTime dtNow = wxDateTime::Now();
- return SetTimes(NULL /* don't change create time */, &dtNow, &dtNow);
+ return SetTimes(&dtNow, &dtNow, NULL /* don't change create time */);
#endif // platforms
}
bool wxFileName::GetTimes(wxDateTime *dtAccess,
wxDateTime *dtMod,
- wxDateTime *dtChange) const
+ wxDateTime *dtCreate) const
{
-#if defined(__UNIX_LIKE__) || defined(__WXMAC__) || (defined(__DOS__) && defined(__WATCOMC__))
- wxStructStat stBuf;
- if ( wxStat(GetFullPath(), &stBuf) == 0 )
+#if defined(__WIN32__)
+ // we must use different methods for the files and directories under
+ // Windows as CreateFile(GENERIC_READ) doesn't work for the directories and
+ // CreateFile(FILE_FLAG_BACKUP_SEMANTICS) works -- but only under NT and
+ // not 9x
+ bool ok;
+ FILETIME ftAccess, ftCreate, ftWrite;
+ if ( IsDir() )
+ {
+ // implemented in msw/dir.cpp
+ extern bool wxGetDirectoryTimes(const wxString& dirname,
+ FILETIME *, FILETIME *, FILETIME *);
+
+ // we should pass the path without the trailing separator to
+ // wxGetDirectoryTimes()
+ ok = wxGetDirectoryTimes(GetPath(wxPATH_GET_VOLUME),
+ &ftAccess, &ftCreate, &ftWrite);
+ }
+ else // file
+ {
+ wxFileHandle fh(GetFullPath(), wxFileHandle::ReadAttr);
+ if ( fh.IsOk() )
+ {
+ ok = ::GetFileTime(fh,
+ dtCreate ? &ftCreate : NULL,
+ dtAccess ? &ftAccess : NULL,
+ dtMod ? &ftWrite : NULL) != 0;
+ }
+ else
+ {
+ ok = false;
+ }
+ }
+
+ if ( ok )
{
+ if ( dtCreate )
+ ConvertFileTimeToWx(dtCreate, ftCreate);
if ( dtAccess )
- dtAccess->Set(stBuf.st_atime);
+ ConvertFileTimeToWx(dtAccess, ftAccess);
if ( dtMod )
- dtMod->Set(stBuf.st_mtime);
- if ( dtChange )
- dtChange->Set(stBuf.st_ctime);
+ ConvertFileTimeToWx(dtMod, ftWrite);
- return TRUE;
+ return true;
}
-#elif defined(__WIN32__)
- wxFileHandle fh(GetFullPath());
- if ( fh.IsOk() )
+#elif defined(__UNIX_LIKE__) || defined(__WXMAC__) || defined(__OS2__) || (defined(__DOS__) && defined(__WATCOMC__))
+ // no need to test for IsDir() here
+ wxStructStat stBuf;
+ if ( StatAny(stBuf, *this) )
{
- FILETIME ftAccess, ftCreate, ftWrite;
+ // Android defines st_*time fields as unsigned long, but time_t as long,
+ // hence the static_casts.
+ if ( dtAccess )
+ dtAccess->Set(static_cast<time_t>(stBuf.st_atime));
+ if ( dtMod )
+ dtMod->Set(static_cast<time_t>(stBuf.st_mtime));
+ if ( dtCreate )
+ dtCreate->Set(static_cast<time_t>(stBuf.st_ctime));
- if ( ::GetFileTime(fh,
- dtMod ? &ftCreate : NULL,
- dtAccess ? &ftAccess : NULL,
- dtChange ? &ftWrite : NULL) )
- {
- if ( dtMod )
- ConvertFileTimeToWx(dtMod, ftCreate);
- if ( dtAccess )
- ConvertFileTimeToWx(dtAccess, ftAccess);
- if ( dtChange )
- ConvertFileTimeToWx(dtChange, ftWrite);
-
- return TRUE;
- }
+ return true;
}
#else // other platform
+ wxUnusedVar(dtAccess);
+ wxUnusedVar(dtMod);
+ wxUnusedVar(dtCreate);
#endif // platforms
wxLogSysError(_("Failed to retrieve file times for '%s'"),
GetFullPath().c_str());
- return FALSE;
+ return false;
+}
+
+#endif // wxUSE_DATETIME
+
+
+// ----------------------------------------------------------------------------
+// file size functions
+// ----------------------------------------------------------------------------
+
+#if wxUSE_LONGLONG
+
+/* static */
+wxULongLong wxFileName::GetSize(const wxString &filename)
+{
+ if (!wxFileExists(filename))
+ return wxInvalidSize;
+
+#if defined(__WIN32__)
+ wxFileHandle f(filename, wxFileHandle::ReadAttr);
+ if (!f.IsOk())
+ return wxInvalidSize;
+
+ DWORD lpFileSizeHigh;
+ DWORD ret = GetFileSize(f, &lpFileSizeHigh);
+ if ( ret == INVALID_FILE_SIZE && ::GetLastError() != NO_ERROR )
+ return wxInvalidSize;
+
+ return wxULongLong(lpFileSizeHigh, ret);
+#else // ! __WIN32__
+ wxStructStat st;
+ if (wxStat( filename, &st) != 0)
+ return wxInvalidSize;
+ return wxULongLong(st.st_size);
+#endif
+}
+
+/* static */
+wxString wxFileName::GetHumanReadableSize(const wxULongLong &bs,
+ const wxString &nullsize,
+ int precision,
+ wxSizeConvention conv)
+{
+ // deal with trivial case first
+ if ( bs == 0 || bs == wxInvalidSize )
+ return nullsize;
+
+ // depending on the convention used the multiplier may be either 1000 or
+ // 1024 and the binary infix may be empty (for "KB") or "i" (for "KiB")
+ double multiplier = 1024.;
+ wxString biInfix;
+
+ switch ( conv )
+ {
+ case wxSIZE_CONV_TRADITIONAL:
+ // nothing to do, this corresponds to the default values of both
+ // the multiplier and infix string
+ break;
+
+ case wxSIZE_CONV_IEC:
+ biInfix = "i";
+ break;
+
+ case wxSIZE_CONV_SI:
+ multiplier = 1000;
+ break;
+ }
+
+ const double kiloByteSize = multiplier;
+ const double megaByteSize = multiplier * kiloByteSize;
+ const double gigaByteSize = multiplier * megaByteSize;
+ const double teraByteSize = multiplier * gigaByteSize;
+
+ const double bytesize = bs.ToDouble();
+
+ wxString result;
+ if ( bytesize < kiloByteSize )
+ result.Printf("%s B", bs.ToString());
+ else if ( bytesize < megaByteSize )
+ result.Printf("%.*f K%sB", precision, bytesize/kiloByteSize, biInfix);
+ else if (bytesize < gigaByteSize)
+ result.Printf("%.*f M%sB", precision, bytesize/megaByteSize, biInfix);
+ else if (bytesize < teraByteSize)
+ result.Printf("%.*f G%sB", precision, bytesize/gigaByteSize, biInfix);
+ else
+ result.Printf("%.*f T%sB", precision, bytesize/teraByteSize, biInfix);
+
+ return result;
+}
+
+wxULongLong wxFileName::GetSize() const
+{
+ return GetSize(GetFullPath());
+}
+
+wxString wxFileName::GetHumanReadableSize(const wxString& failmsg,
+ int precision,
+ wxSizeConvention conv) const
+{
+ return GetHumanReadableSize(GetSize(), failmsg, precision, conv);
+}
+
+#endif // wxUSE_LONGLONG
+
+// ----------------------------------------------------------------------------
+// Mac-specific functions
+// ----------------------------------------------------------------------------
+
+#if defined( __WXOSX_MAC__ ) && wxOSX_USE_CARBON
+
+namespace
+{
+
+class MacDefaultExtensionRecord
+{
+public:
+ MacDefaultExtensionRecord()
+ {
+ m_type =
+ m_creator = 0 ;
+ }
+
+ // default copy ctor, assignment operator and dtor are ok
+
+ MacDefaultExtensionRecord(const wxString& ext, OSType type, OSType creator)
+ : m_ext(ext)
+ {
+ m_type = type;
+ m_creator = creator;
+ }
+
+ wxString m_ext;
+ OSType m_type;
+ OSType m_creator;
+};
+
+WX_DECLARE_OBJARRAY(MacDefaultExtensionRecord, MacDefaultExtensionArray);
+
+bool gMacDefaultExtensionsInited = false;
+
+#include "wx/arrimpl.cpp"
+
+WX_DEFINE_EXPORTED_OBJARRAY(MacDefaultExtensionArray);
+
+MacDefaultExtensionArray gMacDefaultExtensions;
+
+// load the default extensions
+const MacDefaultExtensionRecord gDefaults[] =
+{
+ MacDefaultExtensionRecord( "txt", 'TEXT', 'ttxt' ),
+ MacDefaultExtensionRecord( "tif", 'TIFF', '****' ),
+ MacDefaultExtensionRecord( "jpg", 'JPEG', '****' ),
+};
+
+void MacEnsureDefaultExtensionsLoaded()
+{
+ if ( !gMacDefaultExtensionsInited )
+ {
+ // we could load the pc exchange prefs here too
+ for ( size_t i = 0 ; i < WXSIZEOF( gDefaults ) ; ++i )
+ {
+ gMacDefaultExtensions.Add( gDefaults[i] ) ;
+ }
+ gMacDefaultExtensionsInited = true;
+ }
+}
+
+} // anonymous namespace
+
+bool wxFileName::MacSetTypeAndCreator( wxUint32 type , wxUint32 creator )
+{
+ FSRef fsRef ;
+ FSCatalogInfo catInfo;
+ FileInfo *finfo ;
+
+ if ( wxMacPathToFSRef( GetFullPath() , &fsRef ) == noErr )
+ {
+ if ( FSGetCatalogInfo (&fsRef, kFSCatInfoFinderInfo, &catInfo, NULL, NULL, NULL) == noErr )
+ {
+ finfo = (FileInfo*)&catInfo.finderInfo;
+ finfo->fileType = type ;
+ finfo->fileCreator = creator ;
+ FSSetCatalogInfo( &fsRef, kFSCatInfoFinderInfo, &catInfo ) ;
+ return true ;
+ }
+ }
+ return false ;
+}
+
+bool wxFileName::MacGetTypeAndCreator( wxUint32 *type , wxUint32 *creator ) const
+{
+ FSRef fsRef ;
+ FSCatalogInfo catInfo;
+ FileInfo *finfo ;
+
+ if ( wxMacPathToFSRef( GetFullPath() , &fsRef ) == noErr )
+ {
+ if ( FSGetCatalogInfo (&fsRef, kFSCatInfoFinderInfo, &catInfo, NULL, NULL, NULL) == noErr )
+ {
+ finfo = (FileInfo*)&catInfo.finderInfo;
+ *type = finfo->fileType ;
+ *creator = finfo->fileCreator ;
+ return true ;
+ }
+ }
+ return false ;
+}
+
+bool wxFileName::MacSetDefaultTypeAndCreator()
+{
+ wxUint32 type , creator ;
+ if ( wxFileName::MacFindDefaultTypeAndCreator(GetExt() , &type ,
+ &creator ) )
+ {
+ return MacSetTypeAndCreator( type , creator ) ;
+ }
+ return false;
+}
+
+bool wxFileName::MacFindDefaultTypeAndCreator( const wxString& ext , wxUint32 *type , wxUint32 *creator )
+{
+ MacEnsureDefaultExtensionsLoaded() ;
+ wxString extl = ext.Lower() ;
+ for( int i = gMacDefaultExtensions.Count() - 1 ; i >= 0 ; --i )
+ {
+ if ( gMacDefaultExtensions.Item(i).m_ext == extl )
+ {
+ *type = gMacDefaultExtensions.Item(i).m_type ;
+ *creator = gMacDefaultExtensions.Item(i).m_creator ;
+ return true ;
+ }
+ }
+ return false ;
+}
+
+void wxFileName::MacRegisterDefaultTypeAndCreator( const wxString& ext , wxUint32 type , wxUint32 creator )
+{
+ MacEnsureDefaultExtensionsLoaded();
+ MacDefaultExtensionRecord rec(ext.Lower(), type, creator);
+ gMacDefaultExtensions.Add( rec );
}
+#endif // defined( __WXOSX_MAC__ ) && wxOSX_USE_CARBON
projects / wxWidgets.git / blobdiff