wxPaletteBase introduction. wxPalette::GetColoursCount() in interface of all platform...

[wxWidgets.git] / docs / latex / wx / txtstrm.tex

diff --git a/docs/latex/wx/txtstrm.tex b/docs/latex/wx/txtstrm.tex
index 059b72277d3aaca8463dadf9dfac3d5fb29955c0..eb651ebb6f3209d0bd3c2a8c54985d71a306cd0c 100644 (file)
--- a/docs/latex/wx/txtstrm.tex
+++ b/docs/latex/wx/txtstrm.tex
@@ -15,6 +15,12 @@ and on a typical 32-bit computer, none of these match to the "long" type (wxInt3
 is defined as int on 32-bit architectures) so that you cannot use long. To avoid
 problems (here and elsewhere), make use of wxInt32, wxUint32 and similar types.
 
 is defined as int on 32-bit architectures) so that you cannot use long. To avoid
 problems (here and elsewhere), make use of wxInt32, wxUint32 and similar types.
 

+If you're scanning through a file using wxTextInputStream, you should check for EOF {\bf before}
+reading the next item (word / number), because otherwise the last item may get lost. 
+You should however be prepared to receive an empty item (empty string / zero number) at the
+end of file, especially on Windows systems. This is unavoidable because most (but not all) files end
+with whitespace (i.e. usually a newline).
+

 For example:
 
 \begin{verbatim}
 For example:
 
 \begin{verbatim}


@@ -35,42 +41,94 @@ For example:
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamconstr}
+\membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamctor}

 
 

-\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}}
+\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}, \param{const wxString\&}{ sep=" $\backslash$t"}, 
+  \param{wxMBConv\&}{ conv = wxConvUTF8} }

 
 

-Constructs a text stream object from an input stream. Only read methods will
-be available.
+Constructs a text stream associated to the given input stream.

 
 \wxheading{Parameters}
 
 
 \wxheading{Parameters}
 

-\docparam{stream}{The input stream.}
+\docparam{stream}{The underlying input stream.}
+
+\docparam{sep}{The initial string separator characters.}

 
 

-\membersection{wxTextInputStream::\destruct{wxTextInputStream}}
+\docparam{conv}{{\it In Unicode build only:} The encoding converter used to convert the bytes in the
+  underlying input stream to characters.}
+
+\membersection{wxTextInputStream::\destruct{wxTextInputStream}}\label{wxtextinputstreamdtor}

 
 \func{}{\destruct{wxTextInputStream}}{\void}
 
 Destroys the wxTextInputStream object.
 
 
 \func{}{\destruct{wxTextInputStream}}{\void}
 
 Destroys the wxTextInputStream object.
 

-\membersection{wxTextInputStream::Read8}
+\membersection{wxTextInputStream::Read8}\label{wxtextinputstreamread8}
+
+\func{wxUint8}{Read8}{\param{int}{ base = 10}}
+
+Reads a single unsigned byte from the stream, given in base {\it base}.
+
+The value of {\it base} must be comprised between $2$ and $36$, inclusive, or
+be a special value $0$ which means that the usual rules of {\tt C} numbers are
+applied: if the number starts with {\tt 0x} it is considered to be in base
+$16$, if it starts with {\tt 0} - in base $8$ and in base $10$ otherwise. Note
+that you may not want to specify the base $0$ if you are parsing the numbers
+which may have leading zeroes as they can yield unexpected (to the user not
+familiar with C) results.
+
+\membersection{wxTextInputStream::Read8S}\label{wxtextinputstreamread8s}
+
+\func{wxInt8}{Read8S}{\param{int}{ base = 10}}
+
+Reads a single signed byte from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::Read16}\label{wxtextinputstreamread16}
+
+\func{wxUint16}{Read16}{\param{int}{ base = 10}}
+
+Reads a unsigned 16 bit integer from the stream.

 
 

-\func{wxUint8}{Read8}{\void}
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.

 
 

-Reads a single byte from the stream.
+\membersection{wxTextInputStream::Read16S}\label{wxtextinputstreamread16s}

 
 

-\membersection{wxTextInputStream::Read16}
+\func{wxInt16}{Read16S}{\param{int}{ base = 10}}

 
 

-\func{wxUint16}{Read16}{\void}
+Reads a signed 16 bit integer from the stream.

 
 

-Reads a 16 bit integer from the stream.
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.

 
 

-\membersection{wxTextInputStream::Read32}
+\membersection{wxTextInputStream::Read32}\label{wxtextinputstreamread32}

 
 

-\func{wxUint32}{Read32}{\void}
+\func{wxUint32}{Read32}{\param{int}{ base = 10}}

 
 

-Reads a 32 bit integer from the stream.
+Reads a 32 bit unsigned integer from the stream.

 
 

-\membersection{wxTextInputStream::ReadDouble}
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::Read32S}\label{wxtextinputstreamread32s}
+
+\func{wxInt32}{Read32S}{\param{int}{ base = 10}}
+
+Reads a 32 bit signed integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::GetChar}\label{wxtextinputstreamgetchar}
+
+\func{wxChar}{wxTextInputStream::GetChar}{\void}
+
+Reads a character, returns $0$ if there are no more characters in the stream.
+
+\membersection{wxTextInputStream::ReadDouble}\label{wxtextinputstreamreaddouble}

 
 \func{double}{ReadDouble}{\void}
 
 
 \func{double}{ReadDouble}{\void}
 


@@ -83,7 +141,7 @@ Reads a double (IEEE encoded) from the stream.
 Reads a line from the input stream and returns it (without the end of line
 character).
 
 Reads a line from the input stream and returns it (without the end of line
 character).
 

-\membersection{wxTextInputStream::ReadString}
+\membersection{wxTextInputStream::ReadString}\label{wxtextinputstreamreadstring}

 
 \func{wxString}{wxTextInputStream::ReadString}{\void}
 
 
 \func{wxString}{wxTextInputStream::ReadString}{\void}
 


@@ -137,12 +195,11 @@ and Unix in their native formats (concerning the line ending).
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxtextoutputstreamconstr}
+\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxtextoutputstreamctor}

 
 

-\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}, \param{wxEOL}{ mode = wxEOL\_NATIVE}}
+\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}, \param{wxEOL}{ mode = wxEOL\_NATIVE}, \param{wxMBConv\&}{ conv = wxConvUTF8}}

 
 

-Constructs a text stream object from an output stream. Only write methods will
-be available.
+Constructs a text stream object associated to the given output stream.

 
 \wxheading{Parameters}
 
 
 \wxheading{Parameters}
 


@@ -150,49 +207,58 @@ be available.
 
 \docparam{mode}{The end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.}
 
 
 \docparam{mode}{The end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.}
 

-\membersection{wxTextOutputStream::\destruct{wxTextOutputStream}}
+\docparam{conv}{{\it In Unicode build only:} The object used to convert
+Unicode text into ASCII characters written to the output stream.}
+
+\membersection{wxTextOutputStream::\destruct{wxTextOutputStream}}\label{wxtextoutputstreamdtor}

 
 \func{}{\destruct{wxTextOutputStream}}{\void}
 
 Destroys the wxTextOutputStream object.
 
 
 \func{}{\destruct{wxTextOutputStream}}{\void}
 
 Destroys the wxTextOutputStream object.
 

-\membersection{wxTextOutputStream::GetMode}
+\membersection{wxTextOutputStream::GetMode}\label{wxtextoutputstreamgetmode}

 
 \func{wxEOL}{wxTextOutputStream::GetMode}{\void}
 
 Returns the end-of-line mode. One of {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.
 
 
 \func{wxEOL}{wxTextOutputStream::GetMode}{\void}
 
 Returns the end-of-line mode. One of {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.
 

-\membersection{wxTextOutputStream::SetMode}
+\membersection{wxTextOutputStream::SetMode}\label{wxtextoutputstreamsetmode}

 
 \func{void}{wxTextOutputStream::SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}}
 
 Set the end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.
 
 
 \func{void}{wxTextOutputStream::SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}}
 
 Set the end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.
 

-\membersection{wxTextOutputStream::Write8}
+\membersection{wxTextOutputStream::Write8}\label{wxtextoutputstreamwrite8}

 
 \func{void}{wxTextOutputStream::Write8}{{\param wxUint8 }{i8}}
 
 Writes the single byte {\it i8} to the stream.
 
 
 \func{void}{wxTextOutputStream::Write8}{{\param wxUint8 }{i8}}
 
 Writes the single byte {\it i8} to the stream.
 

-\membersection{wxTextOutputStream::Write16}
+\membersection{wxTextOutputStream::PutChar}\label{wxtextoutputstreamputchar}
+
+\func{void}{wxTextOutputStream::PutChar}{{\param wxChar }{c}}
+
+Writes a character to the stream.
+
+\membersection{wxTextOutputStream::Write16}\label{wxtextoutputstreamwrite16}

 
 \func{void}{wxTextOutputStream::Write16}{{\param wxUint16 }{i16}}
 
 Writes the 16 bit integer {\it i16} to the stream.
 
 
 \func{void}{wxTextOutputStream::Write16}{{\param wxUint16 }{i16}}
 
 Writes the 16 bit integer {\it i16} to the stream.
 

-\membersection{wxTextOutputStream::Write32}
+\membersection{wxTextOutputStream::Write32}\label{wxtextoutputstreamwrite32}

 
 \func{void}{wxTextOutputStream::Write32}{{\param wxUint32 }{i32}}
 
 Writes the 32 bit integer {\it i32} to the stream.
 
 
 \func{void}{wxTextOutputStream::Write32}{{\param wxUint32 }{i32}}
 
 Writes the 32 bit integer {\it i32} to the stream.
 

-\membersection{wxTextOutputStream::WriteDouble}
+\membersection{wxTextOutputStream::WriteDouble}\label{wxtextoutputstreamwritedouble}

 
 \func{virtual void}{wxTextOutputStream::WriteDouble}{{\param double }{f}}
 
 Writes the double {\it f} to the stream using the IEEE format.
 
 
 \func{virtual void}{wxTextOutputStream::WriteDouble}{{\param double }{f}}
 
 Writes the double {\it f} to the stream using the IEEE format.
 

-\membersection{wxTextOutputStream::WriteString}
+\membersection{wxTextOutputStream::WriteString}\label{wxtextoutputstreamwritestring}

 
 \func{virtual void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}}
 
 
 \func{virtual void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}}
 


@@ -200,4 +266,3 @@ Writes {\it string} as a line. Depending on the end-of-line mode the end of
 line ('$\backslash$n') characters in the string are converted to the correct
 line ending terminator.
 
 line ('$\backslash$n') characters in the string are converted to the correct
 line ending terminator.
 

-