+Compiling using the makefiles (updated 24 Sept 02):
+
+1. Change directory to build\msw. Type 'make -f makefile.bcc' to
+ make the wxWidgets core library. Ignore the compiler warnings.
+ This produces a couple of libraries in the lib\bcc_lib directory.
+
+2. Change directory to a sample or demo such as samples\minimal, and type
+ 'make -f makefile.bcc'. This produces a windows exe file - by default
+ in the bcc_mswd subdirectory.
+
+Note (1): the wxWidgets makefiles assume dword structure alignment. Please
+make sure that your own project or makefile settings use the
+same alignment, or you could experience mysterious crashes. To
+change the alignment, change CPPFLAGS in build\msw\config.bcc.
+
+Note (2): if you get undefined _SQL... symbols at link time,
+either install odbc32.lib from the BC++ CD-ROM into your BC++ lib
+directory, or set wxUSE_ODBC to 0 in include\wx\msw\setup.h and
+recompile wxWidgets. The same applies if compiling using the IDE.
+
+Note (3): If you wish debug messages to be sent to the console in
+debug mode, edit makefile.bcc and change /aa to /Tpe in link commands.
+
+Compiling using the IDE files for Borland C++ 5.0: not supported - please
+use version 2.4.1 (using the make utility in commandline mode works fine_
+
+Compiling using CBuilder (v1-v6): not supported - please
+use version 2.4.1 (using the make utility in commandline mode works fine_
+
+** REMEMBER **
+
+In all of your wxWidgets applications, your source code should include
+the following preprocessor directive:
+
+#ifdef __BORLANDC__
+#pragma hdrstop
+#endif
+
+(check the samples -- e.g., \wx2\samples\minimal\minimal.cpp -- for
+more details)
+
+Borland 16 Bit compilation for Windows 3.1
+------------------------------------------
+
+The last version of wxWidgets to support 16-bit compilation with Borland was
+2.2.7 - Please download and read the instructions in that release
+
+Watcom C++ 10.6/11 and OpenWatcom compilation
+---------------------------------------------
+
+1. Change directory to build\msw. Type 'wmake -f makefile.wat' to
+ make the wxWidgets core library.
+
+2. Change directory to samples\minimal and type 'wmake -f makefile.wat'
+ to make this sample. Repeat for other samples of interest.
+
+Note (1): if your installation of Watcom doesn't have odbc32.lib file and
+ you need it (i.e. you have wxUSE_ODBC=1), you can use the file
+ from lib\watcom directory. See the notes in that directory.
+
+Note (2): if variant.cpp is compiled with date/time class options, the linker
+ gives up. So the date/time option is switched off for Watcom C++.
+ Also, wxAutomationObject is not compiled with Watcom C++ 10.
+
+Note (3): RawBitmaps won't work at present because they use unsupported template
+ classes
+
+Note (4): if Watcom can't read the precompiled header when building a sample,
+ try deleting .pch files in build\msw\wat_* and compiling
+ the sample again.
+
+Metrowerks CodeWarrior compilation
+----------------------------------
+
+1. CodeWarrior Pro7 project files in XML format are already
+ included in wxMSW-2.5.5.zip and the setup version.
+
+2. Review the file include\wx\msw\setup.h (or include\wx\msw\setup0.h if
+ you are working from the CVS version) to make sure the settings reflect
+ what you want. If you aren't sure, leave it alone and go with the
+ default settings. A few notes:
+ - Don't use wxUSE_DEBUG_NEW_ALWAYS: it doesn't mix well with MSL
+ - wxUSE_GLOBAL_MEMORY_OPERATORS works, but memory leak reports
+ will be rather confusing due to interactions with the MSL ANSI
+ and runtime libs.
+
+3. The project file to build the Win32 wxWidgets libraries relies on the
+ Batch File Runner plug-in. This plug-in is not installed as part of
+ a normal CW7 installation. However, you can find this plug-in on the
+ CodeWarrior Reference CD, in the Thrill Seekers folder; it's call the
+ "Batch File Post Linker".
+
+4. If you choose not to install the Batch File Runner plug-in, then you
+ need to do the following by hand:
+ (1) Create the directories lib\cw7msw\include\wx and copy the file
+ include\wx\msw\setup.h (or include\wx\msw\setup0.h if you are
+ working from the CVS version) to lib\cw7msw\include\wx\setup.h
+ (2) Create the directories lib\cw7mswd\include\wx and copy the file
+ include\wx\msw\setup.h (or include\wx\msw\setup0.h if you are
+ working from the CVS version) to lib\cw7mswd\include\wx\setup.h
+
+5. Import src\wxWidgetsW7.xml to create the project file wxWidgetsW7.mcp.
+ Store this project file in directory src. You may get warnings about
+ not being able to find certain project paths; ignore these warnings, the
+ appropriate paths will be created during the build by the Batch File Runner.
+
+6. Choose the wxlib Win32 debug or wxlib Win32 Release target and build. You
+ will get some warnings about hidden virtual functions, illegal conversions
+ from const pointers to pointers, etc., all of which you can safely ignore.
+ ***Note: if you get errors that the compiler can't find "wx/setup.h", just
+ stop the build and build again. These errors occur because sometimes the
+ compiler starts doing its thing before the copying of setup.h has completed.
+
+7. The following libraries will be produced depending on chosen
+ target:
+ - wx_x86.lib ANSI Release (static)
+ - wx_x86_d.lib ANSI Debug (static)
+
+8. Sorry, I haven't had time yet to create and test unicode or DLL versions.
+ Volunteers for this are welcome (as neither DLLs nor unicode builds are
+ big priorities for me ;).
+
+9. CodeWarrior Pro7 project files (in XML format) are also provided for some
+ of the samples. In particular, there are project files for the minimal,
+ controls, dialogs, dnd, nd docview samples. You can use these project
+ files as templates for the other samples and for your own projects.
+ - For example, to make a project file for the "grid" sample,
+ just copy the project file for the "minimal" sample, minimalW7.mcp
+ (made by importing minimalW7.xml into CodeWarrior), into the
+ sample/grid directory, calling it gridW7.mcp. Open
+ newgridW7.mcp and revise the project by deleting the files
+ minimal.rc and minimal.cpp and adding the files griddemo.rc and
+ griddemo.cpp. Build and run....
+
+
+Cygwin/MinGW compilation
+------------------------
+
+wxWidgets supports Cygwin (formerly GnuWin32) betas and
+releases, and MinGW. Cygwin can be downloaded from:
+
+ http://sources.redhat.com/cygwin/
+
+and MinGW from:
+
+ http://www.mingw.org/
+
+Both Cygwin and MinGW can be used with configure (assuming you have MSYS
+installed in case of MinGW). You will need new enough MinGW version, preferably
+MinGW 2.0 (ships with gcc3) or at least 1.0 (gcc-2.95.3). GCC versions older
+than 2.95.3 don't work; you can use wxWidgets 2.4 with them.
+If using Cygwin, you must pass --disable-sockets to configure due to a header
+conflict in Cygwin.
+
+NOTE: some notes specific to old Cygwin (< 1.1.x) are at the end of this
+ section (see OLD VERSIONS)
+
+There are two methods of compiling wxWidgets, by using the
+makefiles provided or by using 'configure'.
+
+Retrieve and install the latest version of Cygwin, or MinGW, as per
+the instructions with either of these packages.
+
+If using MinGW, you can download the add-on MSYS package to
+provide Unix-like tools that you'll need to build wxWidgets using configure.
+
+Using makefiles directly
+------------------------
+
+NOTE: The makefile.gcc makefiles are for compilation under MinGW using
+ native make and Windows command interpreter (command.com/cmd.exe), they
+ won't work in other environments (such as UNIX or Unix-like, e.g. MSYS;
+ you have to use configure instead)
projects / wxWidgets.git / blobdiff